Navigation

    Logo
    • Register
    • Login
    • Search
    • Recent
    • Tags
    • Unread
    • Categories
    • Unreplied
    • Popular
    • GitHub
    • Docu
    • Hilfe
    1. Home
    2. Deutsch
    3. ioBroker Allgemein
    4. (gelöst)USV

    NEWS

    • Neuer Blog: Fotos und Eindrücke aus Solingen

    • ioBroker@Smart Living Forum Solingen, 14.06. - Agenda added

    • ioBroker goes Matter ... Matter Adapter in Stable

    (gelöst)USV

    This topic has been deleted. Only users with topic management privileges can see it.
    • ostseereiter
      ostseereiter @Homoran last edited by ostseereiter

      @homoran
      jetzt kommt dieser Befehl sudo nano /etc/nut/upsd.conf
      und da soll ich dann dies eintragen :

      LISTEN 127.0.0.1 3493
      LISTEN 192.168.178.123 3493
      
      

      also so dann weil es ja mein Server ist

      andy@debian:~$ sudo nano /etc/nut/upsd.conf
        GNU nano 3.2                  /etc/nut/upsd.conf                   Verändert
      
      # CERTREQUEST REQUIRE
      #
      # When compiled with SSL support with NSS backend and client certificate
      # validation (disabled by default, see 'docs/security.txt'),
      # you can specify if upsd requests or requires client's' certificates.
      # Possible values are :
      #  - 0 to not request to clients to provide any certificate
      #  - 1 to require to all clients a certificate
      #  - 2 to require to all clients a valid certificate
      #
      # See 'docs/security.txt' or the Security chapter of NUT user manual
      # for more information on the SSL support in NUT.
      
      LISTEN 127.0.0.1 3493
      LISTEN 192.168.178.109 3493
      
      

      einfach in ein freies Feld?

      Ich denke das war richtig denn nach erneuten stoppen und starten kam diese Ausgabe:

      
      andy@debian:~$ sudo nano /etc/nut/upsd.conf
      andy@debian:~$ sudo upsd -c stop
      [sudo] Passwort für andy:
      Network UPS Tools upsd 2.7.4
      andy@debian:~$ sudo upsd
      Network UPS Tools upsd 2.7.4
      fopen /var/run/nut/upsd.pid: No such file or directory
      listening on 192.168.178.109 port 3493
      listening on 127.0.0.1 port 3493
      Connected to UPS [serverups]: usbhid-ups-serverups
      andy@debian:~$
      
      
      1 Reply Last reply Reply Quote 0
      • ostseereiter
        ostseereiter last edited by

        So Freunde weiter gehts
        udo nano /etc/nut/upsd.users
        habe ich folgendes festgelegt.

        [upsmaster]
                password = xxxxxxx
                actions = SET
                instcmds = ALL
                upsmon master
         
        [raspiuser]
        	password = xxxxx
        	upsmon slave
         
        [upskino]
                password  = xxxx
                upsmon slave
        

        dann unter sudo nano /etc/nut/upsmon.conf

        MONITOR serverups@localhost 1 upsmaster xxxxxxx master
        
        MONITOR serverups@192.168.178.109 1 raspiuser xxxx slave
        MONITOR serverups@192.168.178.109 1 upskino xxxx slave
        

        Dann den Dienst neu gestartet mit sudo systemctl restart nut-client
        Da kam diese Meldung

        See "systemctl status nut-monitor.service" and "journalctl -xe" for details.
        

        gebe ich nun diesen Befehl ein sudo upsc serverups@localhost
        kommt diese Meldung

         sudo upsc serverups@localhost
        Init SSL without certificate database
        Error: Driver not connected
        
        

        nu weiß ich nicht mehr weiter.

        crunchip 1 Reply Last reply Reply Quote 0
        • crunchip
          crunchip Forum Testing Most Active @ostseereiter last edited by

          @ostseereiter sagte in USV:

          kommt diese Meldung

          hast du irgendwo noch eine # entfernt in der /etc/nut/upsd.conf ? da sollte nur deine zwei Listen....ohne '# sein

          irgendwie finde ich bei deinen Schritten nicht die Änderung der /etc/nut/nut.conf
          da muss noch folgendes rein

          MODE=netserver
          
          ostseereiter 1 Reply Last reply Reply Quote 0
          • ostseereiter
            ostseereiter @crunchip last edited by

            @crunchip
            in der /etc/nut/upsd.conf
            habe ich jetzt zwei Listen drin ich dachte es müssen alle Rechner rein die man überwachen will.also habe ich den Raspi wieder raus
            nun steht da nur noch das:

            LISTEN 127.0.0.1 3493
            LISTEN 192.168.178.109 3493
            

            und in der /etc/nut/nut.conf steht diese beiden Sachen drin.

            MODE=netserver
            MODE=client
            
            crunchip 1 Reply Last reply Reply Quote 0
            • crunchip
              crunchip Forum Testing Most Active @ostseereiter last edited by

              @ostseereiter sagte in USV:

              und in der /etc/nut/nut.conf steht diese beiden Sachen drin.

              beides zusammen in ein und der selben Datei??
              server gehört da rein wo die USV dran hängt
              client bei allen anderen Geräten, die entsprechend mit gesteuert werden sollen

              @ostseereiter sagte in USV:

              ich dachte es müssen alle Rechner rein

              nein nur dein Server

              ostseereiter 1 Reply Last reply Reply Quote 0
              • ostseereiter
                ostseereiter @crunchip last edited by

                @crunchip sagte in USV:

                beides zusammen in ein und der selben Datei??

                Ja habe ich dann rausgenommen
                in welcher Datei kommt dann die Clients?

                crunchip 1 Reply Last reply Reply Quote 0
                • crunchip
                  crunchip Forum Testing Most Active @ostseereiter last edited by

                  @ostseereiter sagte in USV:

                  in welcher Datei kommt dann die Clients?

                  du musst doch an jedem Gerät/Rechner den du mit steuern möchtest, ebenfalls dieses ausführen

                  Clients / Slaves einrichten (z.B. Server, andere Computer)
                  
                  Zuerst müssen auf einem Client die notwendigen Pakete installiert werden:
                  
                  sudo apt-get install nut-client
                  
                  Diesmal müssen wir nur zwei Dateien editieren. In der /etc/nut/nut.conf legen wir den Modus fest:
                  
                  MODE=netclient
                  
                  Danach müssen wir wieder upsmon sagen, welche UPS er überwachen soll (in /etc/nut/upsmon.conf):
                  
                  MONITOR gxt4@192.168.1.2 upsremote geheim slave
                  
                  Die IP und das Passwort müssen natürlich noch angepasst werden. Bitte auch das slave am Ende beachten! Zuletzt noch den entsprechenden Service neu starten und überprüfen, ob alles läuft:
                  
                  $ sudo systemctl restart nut-client
                  $ sudo systemctl status nut-client
                  
                  ostseereiter 1 Reply Last reply Reply Quote 0
                  • ostseereiter
                    ostseereiter @crunchip last edited by

                    @crunchip sagte in USV:

                    sudo systemctl status nut-client

                    Ja nun habe ich auf den Client das installiert und natürlich eingetragen in den beiden Dateien
                    dann gestartet. und geschaut ob es läuft dabei kam das raus.

                    pi@SVPi-hole:~ $ sudo systemctl restart nut-client
                    Job for nut-monitor.service failed because the control process exited with error                                                                                                              code.
                    See "systemctl status nut-monitor.service" and "journalctl -xe" for details.
                    pi@SVPi-hole:~ $ sudo systemctl status nut-client
                    ● nut-monitor.service - Network UPS Tools - power device monitor and shutdown co
                       Loaded: loaded (/lib/systemd/system/nut-monitor.service; enabled; vendor pres
                       Active: failed (Result: exit-code) since Fri 2021-05-21 09:30:38 CEST; 17s ag
                      Process: 9283 ExecStart=/sbin/upsmon (code=exited, status=1/FAILURE)
                    
                    May 21 09:30:38 SVPi-hole systemd[1]: Starting Network UPS Tools - power device
                    May 21 09:30:38 SVPi-hole upsmon[9283]: fopen /var/run/nut/upsmon.pid: No such f
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Using power down flag file /etc/killpowe
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Unable to use old-style MONITOR line wit
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Convert it and add a username to upsd.us
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Fatal error: unusable configuration
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Network UPS Tools upsmon 2.7.4
                    May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Control process exite
                    May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Failed with result 'e
                    May 21 09:30:38 SVPi-hole systemd[1]: Failed to start Network UPS Tools - power
                    lines 1-15/15 (END)...skipping...
                    ● nut-monitor.service - Network UPS Tools - power device monitor and shutdown controller
                       Loaded: loaded (/lib/systemd/system/nut-monitor.service; enabled; vendor preset: enabled)
                       Active: failed (Result: exit-code) since Fri 2021-05-21 09:30:38 CEST; 17s ago
                      Process: 9283 ExecStart=/sbin/upsmon (code=exited, status=1/FAILURE)
                    
                    May 21 09:30:38 SVPi-hole systemd[1]: Starting Network UPS Tools - power device monitor and shutdown controller...
                    May 21 09:30:38 SVPi-hole upsmon[9283]: fopen /var/run/nut/upsmon.pid: No such file or directory
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Using power down flag file /etc/killpower
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Unable to use old-style MONITOR line without a username
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Convert it and add a username to upsd.users - see the documentation
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Fatal error: unusable configuration
                    May 21 09:30:38 SVPi-hole upsmon[9283]: Network UPS Tools upsmon 2.7.4
                    May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Control process exited, code=exited, status=1/FAILURE
                    May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Failed with result 'exit-code'.
                    May 21 09:30:38 SVPi-hole systemd[1]: Failed to start Network UPS Tools - power device monitor and shutdown controller.
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    ~
                    lines 1-15/15 (END)
                    
                    
                    crunchip Homoran 2 Replies Last reply Reply Quote 0
                    • crunchip
                      crunchip Forum Testing Most Active @ostseereiter last edited by crunchip

                      @ostseereiter irgendwo hast du etwas falsch eingetragen und daher läuft dein service nicht

                      prüfe doch mal da(Server), wo deine USV dran hängt, das muss erst mal korrekt laufen

                      sudo systemctl status nut-server
                      sudo systemctl status nut-client
                      

                      danach an deinem Client(SLave) die config überprüfen, ob alles richtig eingetragen ist, danach

                      sudo systemctl restart nut-client
                      sudo systemctl status nut-client
                      

                      was mir noch aufgefallen ist, deine 3 user,

                      upsmaster]
                              password = xxxxxxx
                              actions = SET
                              instcmds = ALL
                              upsmon master
                      
                      [raspiuser]
                      	password = xxxxx
                      	upsmon slave
                       
                      [upskino]
                              password  = xxxx
                              upsmon slave
                      

                      reichen eigentlich 2, einmal master, einmal slave, diese musst du ja in der jeweiligen .conf hinterlegen

                      ostseereiter 1 Reply Last reply Reply Quote 0
                      • ostseereiter
                        ostseereiter @crunchip last edited by

                        @crunchip OK ich kontrolliere noch mal alles und dokumentiere das dann hier.

                        1 Reply Last reply Reply Quote 0
                        • Homoran
                          Homoran Global Moderator Administrators @ostseereiter last edited by

                          @ostseereiter sagte in USV:

                          Ja nun habe ich auf den Client das installiert und natürlich eingetragen in den beiden Dateien

                          was installiert und was eingetragen?

                          In den Clients muss natürlich was anderes in den config-Dateien stehen, als im Server

                          ostseereiter 1 Reply Last reply Reply Quote 0
                          • ostseereiter
                            ostseereiter @Homoran last edited by

                            @homoran ja ich dokumentiere noch mal alles schritt für Schritt melde mich dann wieder.

                            1 Reply Last reply Reply Quote 0
                            • ostseereiter
                              ostseereiter last edited by

                              So hier nochmal die einzelnen Schritte.

                              In der sudo nano /etc/nut/ups.conf
                              habe ich das eingetragen außer den pollinterval nicht.

                              #
                              # The general form is:
                              #
                               [serverups]
                                     driver = usbhid-ups
                                       port = auto
                                      desc = "Eeaton UPS"
                              #
                              # The section header ([upsname]) can be just about anything as long as
                              # it is a single word inside brackets.  upsd uses this to uniquely
                              # identify a UPS on this system.
                              

                              in der sudo nano /etc/nut/nut.conf das

                              # IMPORTANT NOTE:
                              #  This file is intended to be sourced by shell scripts.
                              #  You MUST NOT use spaces around the equal sign!
                              
                              MODE=netserver
                              

                              nun kommt sudo nano /etc/nut/upsd.conf da habe ich das drin

                              # you can specify if upsd requests or requires client's' certificates.
                              # Possible values are :
                              #  - 0 to not request to clients to provide any certificate
                              #  - 1 to require to all clients a certificate
                              #  - 2 to require to all clients a valid certificate
                              #
                              # See 'docs/security.txt' or the Security chapter of NUT user manual
                              # for more information on the SSL support in NUT.
                              
                              LISTEN 127.0.0.1 3493
                              LISTEN 192.168.178.109 3493
                              

                              nun die Benutzerkonten ich nehme gleich den 3 raus.sudo nano /etc/nut/upsd.users

                              
                              # MONITOR myups@localhost 1 upsmon pass master  (or slave)
                              [upsmaster]
                               password = test
                               actions = SET
                               instcmds = ALL
                               upsmon master
                              
                              [raspiuser]
                               password = secret
                               upsmon slave
                              

                              in der sudo nano /etc/systemd/system/multi-user.target.wants/nut-server.service steht das:

                              Wants=nut-driver.service
                              Before=nut-monitor.service
                              
                              [Service]
                              ExecStartPre=/bin/sleep 30
                              ExecStart=/sbin/upsd
                              Type=forking
                              
                              [Install]
                              WantedBy=multi-user.target
                              

                              Jetzt das Monitoring sudo nano /etc/nut/upsmon.conf
                              da habe ich diese Zeile hinzugefügt:

                              
                              MONITOR serverups@localhost 1 upsmaster test master
                              

                              Dann habe ich den dienst neugestartet mit sudo systemctl restart nut-server
                              mit

                              andy@debian:~$ sudo systemctl restart nut-server
                              

                              Dann kam dieses bei raus

                              Warning: The unit file, source configuration file or drop-ins of nut-server.service changed on disk. Run 'systemctl daemon-reload' to reload units.
                              Job for nut-server.service failed because the control process exited with error code.
                              See "systemctl status nut-server.service" and "journalctl -xe" for details. 
                              

                              Nun sollte der Server eingerichtet sein

                              Jetzt gehen wir zu den Client der Raspi
                              dort habe ich erst mal installiert mit sudo apt install nut-client
                              jetzt editiert mit sudo nano /etc/nut/nut.conf
                              dort steht drin

                              # - netserver: same as for the standalone configuration, but also need
                              #   some more network access controls (firewall, tcp-wrappers) and possibly a
                              #   specific LISTEN directive in upsd.conf.
                              #   Since this MODE is opened to the network, a special care should be applied
                              #   to security concerns.
                              # - netclient: this mode only requires upsmon.
                              #
                              # IMPORTANT NOTE:
                              #  This file is intended to be sourced by shell scripts.
                              #  You MUST NOT use spaces around the equal sign!
                              
                              MODE=netclient
                              

                              jetzt diese Datei sudo nano /etc/nut/upsmon.conf

                              When compiled with SSL, specify that a secured connection must be used
                              # to communicate with upsd.
                              # If you don't use 'CERTVERIFY 1', then this will at least make sure
                              # that nobody can sniff your sessions without a large effort.  Setting
                              # this will make upsmon drop connections if the remote upsd doesn't
                              # support SSL, so don't use it unless all of them have it running.
                              # When compiled with NSS support of SSL, can be overriden for host
                              # specified with a CERTHOST directive.
                              MONITOR serverups@192.168.178.109 1 raspiuser testslave
                              

                              nun den Clientserver neu starten mit sudo systemctl restart nut-client
                              jetzt kommt diese Ausgabe.

                              pi@SVPi-hole:~ $ sudo systemctl restart nut-client
                              
                              Broadcast message from nut@SVPi-hole (somewhere) (Fri May 21 11:03:50 2021):
                              
                              Communications with UPS serverups@192.168.178.109 lost
                              
                              
                              Broadcast message from nut@SVPi-hole (somewhere) (Fri May 21 11:03:55 2021):
                              
                              UPS serverups@192.168.178.109 is unavailable
                              

                              und nach einer gewissen Zeit diese Ausgabe

                              pi@SVPi-hole:~ $ ^C
                              
                              Broadcast message from nut@SVPi-hole (somewhere) (Fri May 21 11:09:00 2021):
                              
                              UPS serverups@192.168.178.109 is unavailable
                              
                              Homoran crunchip 3 Replies Last reply Reply Quote 0
                              • Homoran
                                Homoran Global Moderator Administrators @ostseereiter last edited by

                                @ostseereiter sagte in USV:

                                In der sudo nano /etc/nut/ups.conf
                                habe ich das eingetragen

                                Beim Server oder bei den Clients?

                                ostseereiter 1 Reply Last reply Reply Quote 0
                                • Homoran
                                  Homoran Global Moderator Administrators @ostseereiter last edited by

                                  @ostseereiter sagte in USV:

                                  Nun sollte der Server eingerichtet sein

                                  aber das davor hast du schon gelesen?

                                  @ostseereiter sagte in USV:

                                  Warning: The unit file, source configuration file or drop-ins of nut-server.service changed on disk. Run 'systemctl daemon-reload' to reload units. Job for nut-server.service failed because the control process exited with error code. See "systemctl status nut-server.service" and "journalctl -xe" for details.

                                  und behoben?

                                  wohl eher nicht!
                                  denn der Controller schgeint weiter nicht erreichbar zu sein

                                  @ostseereiter sagte in USV:

                                  UPS serverups@192.168.178.109 is unavailable

                                  ostseereiter 1 Reply Last reply Reply Quote 0
                                  • ostseereiter
                                    ostseereiter @Homoran last edited by

                                    @homoran
                                    im Server

                                    Thomas Braun 1 Reply Last reply Reply Quote 0
                                    • Thomas Braun
                                      Thomas Braun Most Active @ostseereiter last edited by

                                      @ostseereiter
                                      Ich lese da wieder pihole. Muss da ggf. auch noch was eingestellt werden?

                                      1 Reply Last reply Reply Quote 0
                                      • ostseereiter
                                        ostseereiter @Homoran last edited by

                                        @homoran sagte in USV:

                                        Warning: The unit file, source configuration file or drop-ins of nut-server.service changed on disk. Run 'systemctl daemon-reload' to reload units. Job for nut-server.service failed because the control process exited with error code. See "systemctl status nut-server.service" and "journalctl -xe" for details.

                                        und behoben?
                                        wohl eher nicht!
                                        denn der Controller schgeint weiter nicht erreichbar zu sein
                                        @ostseereiter sagte in USV:

                                        jetzt habe ich versucht das zu beheben.

                                        andy@debian:~$ sudo systemctl daemon-reload
                                        [sudo] Passwort für andy:
                                        andy@debian:~$ sudo systemctl restart nut-server
                                        Job for nut-server.service failed because the control process exited with error                                                                                                              code.
                                        See "systemctl status nut-server.service" and "journalctl -xe" for details.
                                        andy@debian:~$ ^C
                                        andy@debian:~$ sudo systemctl status nut-server.service
                                        ● nut-server.service - Network UPS Tools - power devices information server
                                           Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor prese
                                           Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ag
                                          Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                          Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                        
                                        Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices in
                                        Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                        Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is alre
                                        Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or u
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, c
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-
                                        Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power dev
                                        lines 1-13/13 (END)...skipping...
                                        ● nut-server.service - Network UPS Tools - power devices information server
                                           Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)
                                           Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ago
                                          Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                          Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                        
                                        Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices information server...
                                        Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                        Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is already running!
                                        Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or use the 'reload' command.
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, code=exited, status=1/FAILURE
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-code'.
                                        Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power devices information server.
                                        
                                        lines 1-13/13 (END)
                                        
                                        ● nut-server.service - Network UPS Tools - power devices information server
                                           Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor prese
                                           Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ag
                                          Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                          Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                        
                                        Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices in
                                        Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                        Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is alre
                                        Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or u
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, c
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-
                                        Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power dev
                                        
                                        lines 1-13/13 (END)
                                        ● nut-server.service - Network UPS Tools - power devices information server
                                           Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)
                                           Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ago
                                          Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                          Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                        
                                        Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices information server...
                                        Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                        Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is already running!
                                        Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or use the 'reload' command.
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, code=exited, status=1/FAILURE
                                        Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-code'.
                                        Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power devices information server.
                                        
                                        Homoran BBTown 2 Replies Last reply Reply Quote 0
                                        • Homoran
                                          Homoran Global Moderator Administrators @ostseereiter last edited by

                                          @ostseereiter sagte in USV:

                                          jetzt habe ich versucht das zu beheben.

                                          entscheidend ist vielmehr die Frage was du gemacht hast bevor/so dass es zu dieser Fehlermeldung kam:

                                          @ostseereiter sagte in USV:

                                          The unit file, source configuration file or drop-ins of nut-server.service changed on disk

                                          was hast du da im System verstellt?

                                          ostseereiter 1 Reply Last reply Reply Quote 0
                                          • ostseereiter
                                            ostseereiter @Homoran last edited by

                                            @homoran sagte in USV:

                                            was hast du da im System verstellt?

                                            eigentlich nichts

                                            Thomas Braun 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post

                                            Support us

                                            ioBroker
                                            Community Adapters
                                            Donate
                                            FAQ Cloud / IOT
                                            HowTo: Node.js-Update
                                            HowTo: Backup/Restore
                                            Downloads
                                            BLOG

                                            865
                                            Online

                                            31.9k
                                            Users

                                            80.1k
                                            Topics

                                            1.3m
                                            Posts

                                            9
                                            135
                                            11184
                                            Loading More Posts
                                            • Oldest to Newest
                                            • Newest to Oldest
                                            • Most Votes
                                            Reply
                                            • Reply as topic
                                            Log in to reply
                                            Community
                                            Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen
                                            The ioBroker Community 2014-2023
                                            logo