Navigation

    Logo
    • Register
    • Login
    • Search
    • Recent
    • Tags
    • Unread
    • Categories
    • Unreplied
    • Popular
    • GitHub
    • Docu
    • Hilfe
    1. Home
    2. Deutsch
    3. ioBroker Allgemein
    4. (gelöst)USV

    NEWS

    • Neuer Blog: Fotos und Eindrücke aus Solingen

    • ioBroker@Smart Living Forum Solingen, 14.06. - Agenda added

    • ioBroker goes Matter ... Matter Adapter in Stable

    (gelöst)USV

    This topic has been deleted. Only users with topic management privileges can see it.
    • ostseereiter
      ostseereiter last edited by

      So Freunde weiter gehts
      udo nano /etc/nut/upsd.users
      habe ich folgendes festgelegt.

      [upsmaster]
              password = xxxxxxx
              actions = SET
              instcmds = ALL
              upsmon master
       
      [raspiuser]
      	password = xxxxx
      	upsmon slave
       
      [upskino]
              password  = xxxx
              upsmon slave
      

      dann unter sudo nano /etc/nut/upsmon.conf

      MONITOR serverups@localhost 1 upsmaster xxxxxxx master
      
      MONITOR serverups@192.168.178.109 1 raspiuser xxxx slave
      MONITOR serverups@192.168.178.109 1 upskino xxxx slave
      

      Dann den Dienst neu gestartet mit sudo systemctl restart nut-client
      Da kam diese Meldung

      See "systemctl status nut-monitor.service" and "journalctl -xe" for details.
      

      gebe ich nun diesen Befehl ein sudo upsc serverups@localhost
      kommt diese Meldung

       sudo upsc serverups@localhost
      Init SSL without certificate database
      Error: Driver not connected
      
      

      nu weiß ich nicht mehr weiter.

      crunchip 1 Reply Last reply Reply Quote 0
      • crunchip
        crunchip Forum Testing Most Active @ostseereiter last edited by

        @ostseereiter sagte in USV:

        kommt diese Meldung

        hast du irgendwo noch eine # entfernt in der /etc/nut/upsd.conf ? da sollte nur deine zwei Listen....ohne '# sein

        irgendwie finde ich bei deinen Schritten nicht die Änderung der /etc/nut/nut.conf
        da muss noch folgendes rein

        MODE=netserver
        
        ostseereiter 1 Reply Last reply Reply Quote 0
        • ostseereiter
          ostseereiter @crunchip last edited by

          @crunchip
          in der /etc/nut/upsd.conf
          habe ich jetzt zwei Listen drin ich dachte es müssen alle Rechner rein die man überwachen will.also habe ich den Raspi wieder raus
          nun steht da nur noch das:

          LISTEN 127.0.0.1 3493
          LISTEN 192.168.178.109 3493
          

          und in der /etc/nut/nut.conf steht diese beiden Sachen drin.

          MODE=netserver
          MODE=client
          
          crunchip 1 Reply Last reply Reply Quote 0
          • crunchip
            crunchip Forum Testing Most Active @ostseereiter last edited by

            @ostseereiter sagte in USV:

            und in der /etc/nut/nut.conf steht diese beiden Sachen drin.

            beides zusammen in ein und der selben Datei??
            server gehört da rein wo die USV dran hängt
            client bei allen anderen Geräten, die entsprechend mit gesteuert werden sollen

            @ostseereiter sagte in USV:

            ich dachte es müssen alle Rechner rein

            nein nur dein Server

            ostseereiter 1 Reply Last reply Reply Quote 0
            • ostseereiter
              ostseereiter @crunchip last edited by

              @crunchip sagte in USV:

              beides zusammen in ein und der selben Datei??

              Ja habe ich dann rausgenommen
              in welcher Datei kommt dann die Clients?

              crunchip 1 Reply Last reply Reply Quote 0
              • crunchip
                crunchip Forum Testing Most Active @ostseereiter last edited by

                @ostseereiter sagte in USV:

                in welcher Datei kommt dann die Clients?

                du musst doch an jedem Gerät/Rechner den du mit steuern möchtest, ebenfalls dieses ausführen

                Clients / Slaves einrichten (z.B. Server, andere Computer)
                
                Zuerst müssen auf einem Client die notwendigen Pakete installiert werden:
                
                sudo apt-get install nut-client
                
                Diesmal müssen wir nur zwei Dateien editieren. In der /etc/nut/nut.conf legen wir den Modus fest:
                
                MODE=netclient
                
                Danach müssen wir wieder upsmon sagen, welche UPS er überwachen soll (in /etc/nut/upsmon.conf):
                
                MONITOR gxt4@192.168.1.2 upsremote geheim slave
                
                Die IP und das Passwort müssen natürlich noch angepasst werden. Bitte auch das slave am Ende beachten! Zuletzt noch den entsprechenden Service neu starten und überprüfen, ob alles läuft:
                
                $ sudo systemctl restart nut-client
                $ sudo systemctl status nut-client
                
                ostseereiter 1 Reply Last reply Reply Quote 0
                • ostseereiter
                  ostseereiter @crunchip last edited by

                  @crunchip sagte in USV:

                  sudo systemctl status nut-client

                  Ja nun habe ich auf den Client das installiert und natürlich eingetragen in den beiden Dateien
                  dann gestartet. und geschaut ob es läuft dabei kam das raus.

                  pi@SVPi-hole:~ $ sudo systemctl restart nut-client
                  Job for nut-monitor.service failed because the control process exited with error                                                                                                              code.
                  See "systemctl status nut-monitor.service" and "journalctl -xe" for details.
                  pi@SVPi-hole:~ $ sudo systemctl status nut-client
                  ● nut-monitor.service - Network UPS Tools - power device monitor and shutdown co
                     Loaded: loaded (/lib/systemd/system/nut-monitor.service; enabled; vendor pres
                     Active: failed (Result: exit-code) since Fri 2021-05-21 09:30:38 CEST; 17s ag
                    Process: 9283 ExecStart=/sbin/upsmon (code=exited, status=1/FAILURE)
                  
                  May 21 09:30:38 SVPi-hole systemd[1]: Starting Network UPS Tools - power device
                  May 21 09:30:38 SVPi-hole upsmon[9283]: fopen /var/run/nut/upsmon.pid: No such f
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Using power down flag file /etc/killpowe
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Unable to use old-style MONITOR line wit
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Convert it and add a username to upsd.us
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Fatal error: unusable configuration
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Network UPS Tools upsmon 2.7.4
                  May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Control process exite
                  May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Failed with result 'e
                  May 21 09:30:38 SVPi-hole systemd[1]: Failed to start Network UPS Tools - power
                  lines 1-15/15 (END)...skipping...
                  ● nut-monitor.service - Network UPS Tools - power device monitor and shutdown controller
                     Loaded: loaded (/lib/systemd/system/nut-monitor.service; enabled; vendor preset: enabled)
                     Active: failed (Result: exit-code) since Fri 2021-05-21 09:30:38 CEST; 17s ago
                    Process: 9283 ExecStart=/sbin/upsmon (code=exited, status=1/FAILURE)
                  
                  May 21 09:30:38 SVPi-hole systemd[1]: Starting Network UPS Tools - power device monitor and shutdown controller...
                  May 21 09:30:38 SVPi-hole upsmon[9283]: fopen /var/run/nut/upsmon.pid: No such file or directory
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Using power down flag file /etc/killpower
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Unable to use old-style MONITOR line without a username
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Convert it and add a username to upsd.users - see the documentation
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Fatal error: unusable configuration
                  May 21 09:30:38 SVPi-hole upsmon[9283]: Network UPS Tools upsmon 2.7.4
                  May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Control process exited, code=exited, status=1/FAILURE
                  May 21 09:30:38 SVPi-hole systemd[1]: nut-monitor.service: Failed with result 'exit-code'.
                  May 21 09:30:38 SVPi-hole systemd[1]: Failed to start Network UPS Tools - power device monitor and shutdown controller.
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  ~
                  lines 1-15/15 (END)
                  
                  
                  crunchip Homoran 2 Replies Last reply Reply Quote 0
                  • crunchip
                    crunchip Forum Testing Most Active @ostseereiter last edited by crunchip

                    @ostseereiter irgendwo hast du etwas falsch eingetragen und daher läuft dein service nicht

                    prüfe doch mal da(Server), wo deine USV dran hängt, das muss erst mal korrekt laufen

                    sudo systemctl status nut-server
                    sudo systemctl status nut-client
                    

                    danach an deinem Client(SLave) die config überprüfen, ob alles richtig eingetragen ist, danach

                    sudo systemctl restart nut-client
                    sudo systemctl status nut-client
                    

                    was mir noch aufgefallen ist, deine 3 user,

                    upsmaster]
                            password = xxxxxxx
                            actions = SET
                            instcmds = ALL
                            upsmon master
                    
                    [raspiuser]
                    	password = xxxxx
                    	upsmon slave
                     
                    [upskino]
                            password  = xxxx
                            upsmon slave
                    

                    reichen eigentlich 2, einmal master, einmal slave, diese musst du ja in der jeweiligen .conf hinterlegen

                    ostseereiter 1 Reply Last reply Reply Quote 0
                    • ostseereiter
                      ostseereiter @crunchip last edited by

                      @crunchip OK ich kontrolliere noch mal alles und dokumentiere das dann hier.

                      1 Reply Last reply Reply Quote 0
                      • Homoran
                        Homoran Global Moderator Administrators @ostseereiter last edited by

                        @ostseereiter sagte in USV:

                        Ja nun habe ich auf den Client das installiert und natürlich eingetragen in den beiden Dateien

                        was installiert und was eingetragen?

                        In den Clients muss natürlich was anderes in den config-Dateien stehen, als im Server

                        ostseereiter 1 Reply Last reply Reply Quote 0
                        • ostseereiter
                          ostseereiter @Homoran last edited by

                          @homoran ja ich dokumentiere noch mal alles schritt für Schritt melde mich dann wieder.

                          1 Reply Last reply Reply Quote 0
                          • ostseereiter
                            ostseereiter last edited by

                            So hier nochmal die einzelnen Schritte.

                            In der sudo nano /etc/nut/ups.conf
                            habe ich das eingetragen außer den pollinterval nicht.

                            #
                            # The general form is:
                            #
                             [serverups]
                                   driver = usbhid-ups
                                     port = auto
                                    desc = "Eeaton UPS"
                            #
                            # The section header ([upsname]) can be just about anything as long as
                            # it is a single word inside brackets.  upsd uses this to uniquely
                            # identify a UPS on this system.
                            

                            in der sudo nano /etc/nut/nut.conf das

                            # IMPORTANT NOTE:
                            #  This file is intended to be sourced by shell scripts.
                            #  You MUST NOT use spaces around the equal sign!
                            
                            MODE=netserver
                            

                            nun kommt sudo nano /etc/nut/upsd.conf da habe ich das drin

                            # you can specify if upsd requests or requires client's' certificates.
                            # Possible values are :
                            #  - 0 to not request to clients to provide any certificate
                            #  - 1 to require to all clients a certificate
                            #  - 2 to require to all clients a valid certificate
                            #
                            # See 'docs/security.txt' or the Security chapter of NUT user manual
                            # for more information on the SSL support in NUT.
                            
                            LISTEN 127.0.0.1 3493
                            LISTEN 192.168.178.109 3493
                            

                            nun die Benutzerkonten ich nehme gleich den 3 raus.sudo nano /etc/nut/upsd.users

                            
                            # MONITOR myups@localhost 1 upsmon pass master  (or slave)
                            [upsmaster]
                             password = test
                             actions = SET
                             instcmds = ALL
                             upsmon master
                            
                            [raspiuser]
                             password = secret
                             upsmon slave
                            

                            in der sudo nano /etc/systemd/system/multi-user.target.wants/nut-server.service steht das:

                            Wants=nut-driver.service
                            Before=nut-monitor.service
                            
                            [Service]
                            ExecStartPre=/bin/sleep 30
                            ExecStart=/sbin/upsd
                            Type=forking
                            
                            [Install]
                            WantedBy=multi-user.target
                            

                            Jetzt das Monitoring sudo nano /etc/nut/upsmon.conf
                            da habe ich diese Zeile hinzugefügt:

                            
                            MONITOR serverups@localhost 1 upsmaster test master
                            

                            Dann habe ich den dienst neugestartet mit sudo systemctl restart nut-server
                            mit

                            andy@debian:~$ sudo systemctl restart nut-server
                            

                            Dann kam dieses bei raus

                            Warning: The unit file, source configuration file or drop-ins of nut-server.service changed on disk. Run 'systemctl daemon-reload' to reload units.
                            Job for nut-server.service failed because the control process exited with error code.
                            See "systemctl status nut-server.service" and "journalctl -xe" for details. 
                            

                            Nun sollte der Server eingerichtet sein

                            Jetzt gehen wir zu den Client der Raspi
                            dort habe ich erst mal installiert mit sudo apt install nut-client
                            jetzt editiert mit sudo nano /etc/nut/nut.conf
                            dort steht drin

                            # - netserver: same as for the standalone configuration, but also need
                            #   some more network access controls (firewall, tcp-wrappers) and possibly a
                            #   specific LISTEN directive in upsd.conf.
                            #   Since this MODE is opened to the network, a special care should be applied
                            #   to security concerns.
                            # - netclient: this mode only requires upsmon.
                            #
                            # IMPORTANT NOTE:
                            #  This file is intended to be sourced by shell scripts.
                            #  You MUST NOT use spaces around the equal sign!
                            
                            MODE=netclient
                            

                            jetzt diese Datei sudo nano /etc/nut/upsmon.conf

                            When compiled with SSL, specify that a secured connection must be used
                            # to communicate with upsd.
                            # If you don't use 'CERTVERIFY 1', then this will at least make sure
                            # that nobody can sniff your sessions without a large effort.  Setting
                            # this will make upsmon drop connections if the remote upsd doesn't
                            # support SSL, so don't use it unless all of them have it running.
                            # When compiled with NSS support of SSL, can be overriden for host
                            # specified with a CERTHOST directive.
                            MONITOR serverups@192.168.178.109 1 raspiuser testslave
                            

                            nun den Clientserver neu starten mit sudo systemctl restart nut-client
                            jetzt kommt diese Ausgabe.

                            pi@SVPi-hole:~ $ sudo systemctl restart nut-client
                            
                            Broadcast message from nut@SVPi-hole (somewhere) (Fri May 21 11:03:50 2021):
                            
                            Communications with UPS serverups@192.168.178.109 lost
                            
                            
                            Broadcast message from nut@SVPi-hole (somewhere) (Fri May 21 11:03:55 2021):
                            
                            UPS serverups@192.168.178.109 is unavailable
                            

                            und nach einer gewissen Zeit diese Ausgabe

                            pi@SVPi-hole:~ $ ^C
                            
                            Broadcast message from nut@SVPi-hole (somewhere) (Fri May 21 11:09:00 2021):
                            
                            UPS serverups@192.168.178.109 is unavailable
                            
                            Homoran crunchip 3 Replies Last reply Reply Quote 0
                            • Homoran
                              Homoran Global Moderator Administrators @ostseereiter last edited by

                              @ostseereiter sagte in USV:

                              In der sudo nano /etc/nut/ups.conf
                              habe ich das eingetragen

                              Beim Server oder bei den Clients?

                              ostseereiter 1 Reply Last reply Reply Quote 0
                              • Homoran
                                Homoran Global Moderator Administrators @ostseereiter last edited by

                                @ostseereiter sagte in USV:

                                Nun sollte der Server eingerichtet sein

                                aber das davor hast du schon gelesen?

                                @ostseereiter sagte in USV:

                                Warning: The unit file, source configuration file or drop-ins of nut-server.service changed on disk. Run 'systemctl daemon-reload' to reload units. Job for nut-server.service failed because the control process exited with error code. See "systemctl status nut-server.service" and "journalctl -xe" for details.

                                und behoben?

                                wohl eher nicht!
                                denn der Controller schgeint weiter nicht erreichbar zu sein

                                @ostseereiter sagte in USV:

                                UPS serverups@192.168.178.109 is unavailable

                                ostseereiter 1 Reply Last reply Reply Quote 0
                                • ostseereiter
                                  ostseereiter @Homoran last edited by

                                  @homoran
                                  im Server

                                  Thomas Braun 1 Reply Last reply Reply Quote 0
                                  • Thomas Braun
                                    Thomas Braun Most Active @ostseereiter last edited by

                                    @ostseereiter
                                    Ich lese da wieder pihole. Muss da ggf. auch noch was eingestellt werden?

                                    1 Reply Last reply Reply Quote 0
                                    • ostseereiter
                                      ostseereiter @Homoran last edited by

                                      @homoran sagte in USV:

                                      Warning: The unit file, source configuration file or drop-ins of nut-server.service changed on disk. Run 'systemctl daemon-reload' to reload units. Job for nut-server.service failed because the control process exited with error code. See "systemctl status nut-server.service" and "journalctl -xe" for details.

                                      und behoben?
                                      wohl eher nicht!
                                      denn der Controller schgeint weiter nicht erreichbar zu sein
                                      @ostseereiter sagte in USV:

                                      jetzt habe ich versucht das zu beheben.

                                      andy@debian:~$ sudo systemctl daemon-reload
                                      [sudo] Passwort für andy:
                                      andy@debian:~$ sudo systemctl restart nut-server
                                      Job for nut-server.service failed because the control process exited with error                                                                                                              code.
                                      See "systemctl status nut-server.service" and "journalctl -xe" for details.
                                      andy@debian:~$ ^C
                                      andy@debian:~$ sudo systemctl status nut-server.service
                                      ● nut-server.service - Network UPS Tools - power devices information server
                                         Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor prese
                                         Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ag
                                        Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                        Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                      
                                      Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices in
                                      Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                      Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is alre
                                      Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or u
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, c
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-
                                      Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power dev
                                      lines 1-13/13 (END)...skipping...
                                      ● nut-server.service - Network UPS Tools - power devices information server
                                         Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)
                                         Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ago
                                        Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                        Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                      
                                      Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices information server...
                                      Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                      Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is already running!
                                      Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or use the 'reload' command.
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, code=exited, status=1/FAILURE
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-code'.
                                      Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power devices information server.
                                      
                                      lines 1-13/13 (END)
                                      
                                      ● nut-server.service - Network UPS Tools - power devices information server
                                         Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor prese
                                         Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ag
                                        Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                        Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                      
                                      Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices in
                                      Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                      Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is alre
                                      Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or u
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, c
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-
                                      Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power dev
                                      
                                      lines 1-13/13 (END)
                                      ● nut-server.service - Network UPS Tools - power devices information server
                                         Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; vendor preset: enabled)
                                         Active: failed (Result: exit-code) since Fri 2021-05-21 12:11:20 CEST; 45s ago
                                        Process: 1409 ExecStartPre=/bin/sleep 30 (code=exited, status=0/SUCCESS)
                                        Process: 2130 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
                                      
                                      Mai 21 12:10:50 debian systemd[1]: Starting Network UPS Tools - power devices information server...
                                      Mai 21 12:11:20 debian upsd[2130]: Network UPS Tools upsd 2.7.4
                                      Mai 21 12:11:20 debian upsd[2130]: Fatal error: A previous upsd instance is already running!
                                      Mai 21 12:11:20 debian upsd[2130]: Either stop the previous instance first, or use the 'reload' command.
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Control process exited, code=exited, status=1/FAILURE
                                      Mai 21 12:11:20 debian systemd[1]: nut-server.service: Failed with result 'exit-code'.
                                      Mai 21 12:11:20 debian systemd[1]: Failed to start Network UPS Tools - power devices information server.
                                      
                                      Homoran BBTown 2 Replies Last reply Reply Quote 0
                                      • Homoran
                                        Homoran Global Moderator Administrators @ostseereiter last edited by

                                        @ostseereiter sagte in USV:

                                        jetzt habe ich versucht das zu beheben.

                                        entscheidend ist vielmehr die Frage was du gemacht hast bevor/so dass es zu dieser Fehlermeldung kam:

                                        @ostseereiter sagte in USV:

                                        The unit file, source configuration file or drop-ins of nut-server.service changed on disk

                                        was hast du da im System verstellt?

                                        ostseereiter 1 Reply Last reply Reply Quote 0
                                        • ostseereiter
                                          ostseereiter @Homoran last edited by

                                          @homoran sagte in USV:

                                          was hast du da im System verstellt?

                                          eigentlich nichts

                                          Thomas Braun 1 Reply Last reply Reply Quote 0
                                          • Thomas Braun
                                            Thomas Braun Most Active @ostseereiter last edited by

                                            @ostseereiter

                                            Fatal error: A previous upsd instance is already running!
                                            

                                            Da läuft schon ein daemon.

                                            ostseereiter 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post

                                            Support us

                                            ioBroker
                                            Community Adapters
                                            Donate
                                            FAQ Cloud / IOT
                                            HowTo: Node.js-Update
                                            HowTo: Backup/Restore
                                            Downloads
                                            BLOG

                                            927
                                            Online

                                            31.9k
                                            Users

                                            80.1k
                                            Topics

                                            1.3m
                                            Posts

                                            9
                                            135
                                            11184
                                            Loading More Posts
                                            • Oldest to Newest
                                            • Newest to Oldest
                                            • Most Votes
                                            Reply
                                            • Reply as topic
                                            Log in to reply
                                            Community
                                            Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen
                                            The ioBroker Community 2014-2023
                                            logo