Wir empfehlen: Node.js 22.x
-
Da müssen Komponenten neugebaut werden. Mal deinstallieren und wieder drauf, dann sollte das automatisch passieren.
-
@thomas-braun @thomas-braun Vielen Dank, das hat funktioniert!
Möglicherweise lag es sogar nur daran, dass nach dem Update die vorgewählte serielle Schnittstelle in den Adaptereinstellung geleert wurde, sprich neu ausgewählt werden musste. -
@iobroker2001
Nein, es lag daran:The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 115. This version of Node.js requires NODE_MODULE_VERSION 127.
Das ist jetzt gegen NODE_MODULE_VERSION 127 gebaut worden und dann läuft das auch wieder.
-
zigbee2mqtt ist wohl noch nicht soweit:
zigbee2mqtt.0 2025-08-12 19:37:59.781 error z2m: Could not init sd_notify: The module '/opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.6/node_modules/unix-dgram/build/Release/unix_dgram.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 115. This version of Node.js requires NODE_MODULE_VERSION 127. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`). zigbee2mqtt.0 2025-08-12 19:36:18.708 error z2m: Could not init sd_notify: The module '/opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.6/node_modules/unix-dgram/build/Release/unix_dgram.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 115. This version of Node.js requiresNODE_MODULE_VERSION 127. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).Obwohl alles bislang offensichtlich funktioniert.
-
Da gilt auch:
Da müssen Komponenten neugebaut werden. Mal deinstallieren und wieder drauf, dann sollte das automatisch passieren.
-
@thomas-braun Leider nein, Fehler bleibt.
npm rebuildendet ebenfalls mit dem Code 127.
Zurück auf 20 mittels
iob nodejs-update 20resultiert in
Installing nodejs now! Installing latest nodejs v20 release W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details SUCCESS! v22.18.0 has been installed! You are using the latest nodejs@20 release now! -
@lessthanmore sagte in Wir empfehlen: Node.js 22.x:
resultiert in
v22.18.0 has been installed! You are using the latest nodejs@20 release now!Dann stimmt da irgendwas wohl grundsätzlich mit deinem nodejs nicht.
Ich hab gerade nochmal auf meinem Testsystem alles auf 20 gedrückt:
SUCCESS! v20.19.4 has been installed! You are using the latest nodejs@20 release now!Die Meldung passt.
Und zigbee2mqtt baut bei mir auch mit nodejs22:
2025-08-13 08:26:00.332 - info: zigbee2mqtt.0 (105824) starting. Version 3.0.9 in /opt/iobroker/node_modules/iobroker.zigbee2mqtt, node: v22.18.0, js-controller: 7.0.7 2025-08-13 08:26:00.360 - info: zigbee2mqtt.0 (105824) ================================= Adapter Config ================================= 2025-08-13 08:26:00.361 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Scheme: http 2025-08-13 08:26:00.362 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Server: 2025-08-13 08:26:00.362 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Port: 8080 2025-08-13 08:26:00.363 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Connection Type: ws 2025-08-13 08:26:00.363 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Scheme: ws 2025-08-13 08:26:00.363 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Server: 2025-08-13 08:26:00.364 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Port: 8080 2025-08-13 08:26:00.365 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Auth-Token: unused 2025-08-13 08:26:00.365 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Dummy MQTT-Server: deactivated 2025-08-13 08:26:00.366 - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Debug Log: deactivated 2025-08-13 08:26:00.366 - info: zigbee2mqtt.0 (105824) || Proxy Zigbee2MQTT Logs to ioBroker Logs: activated 2025-08-13 08:26:00.366 - info: zigbee2mqtt.0 (105824) || Use Kelvin: no 2025-08-13 08:26:00.366 - info: zigbee2mqtt.0 (105824) || Use ColorTemperature ColorSync: no 2025-08-13 08:26:00.366 - info: zigbee2mqtt.0 (105824) || Use BrightnessMove OnOff: no 2025-08-13 08:26:00.367 - info: zigbee2mqtt.0 (105824) || Use BrightnessStep OnOff: no 2025-08-13 08:26:00.367 - info: zigbee2mqtt.0 (105824) || Use Event In Desc: yes 2025-08-13 08:26:00.367 - info: zigbee2mqtt.0 (105824) || Use Device Icons: no 2025-08-13 08:26:00.367 - info: zigbee2mqtt.0 (105824) || Use Simple Hold/Release State: yes 2025-08-13 08:26:00.367 - info: zigbee2mqtt.0 (105824) || Use Simple Move/Stop State: no 2025-08-13 08:26:00.368 - info: zigbee2mqtt.0 (105824) || Use Simple Press/Release State: no 2025-08-13 08:26:00.368 - info: zigbee2mqtt.0 (105824) || Use Automatic Coordinator Check: no 2025-08-13 08:26:00.368 - info: zigbee2mqtt.0 (105824) || Coordinator Check Loglevel: info 2025-08-13 08:26:00.368 - info: zigbee2mqtt.0 (105824) || Coordinator Check Cron : 0 3 * * * 2025-08-13 08:26:00.368 - info: zigbee2mqtt.0 (105824) ================================================================================== 2025-08-13 08:26:00.434 - warn: zigbee2mqtt.0 (105824) Please configure the Websoket connection!Ist halt bei mir nicht konfiguriert, aber die Module werden gebaut.
-
@thomas-braun Ja, bauen/ laufen ist kein Problem. Wirft aber dennoch die Meldungen.
Hatte den Adapter gelöscht und neu installiert + reboot. Keine Änderung.Bin jetzt mit der "alten Anleitung" zurück auf 20.
-
Danke!
iob nodejs-update hat geklappt.
(Raspberry4 mit Bookworm)
- PlatformBetriebssystem:linux
- Architektur:arm64
- CPUs:4
- Geschwindigkeit:1800 MHz
- Modell:Cortex-A72
- RAM:7.6 GB
- System-Betriebszeit:00:04:40
- Node.js:v22.18.0
- Zeit:1755067963199
- Zeitversatz:-120
- NPM:10.9.3
- Adapter-Anzahl:667
- Datenträgergröße:234.3 GB
- Freier Festplattenspeicher:227.6 GB
- Aktive Instanzen:46
- Pfad:/opt/iobroker/
- Betriebszeit:00:04:40
- aktiv:true
- _nodeCurrent:22.18.0
- _nodeNewest:22.18.0
- _nodeNewestNext:22.18.0
- _npmCurrent:10.9.3
- _npmNewest:10.9.3
- _npmNewestNext:10.9.3
-
@lessthanmore sagte in Wir empfehlen: Node.js 22.x:
Bin jetzt mit der "alten Anleitung" zurück auf 20.
Ich bin immer noch der Meinung, das du dann da eine 'komische' Installation hast.
-
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: iobroker Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.14.8-2-pve Architecture: x86-64 OS is similar to: model name : 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 11:16:57 up 2:46, 1 user, load average: 0.00, 0.00, 0.00 CPU threads: 2 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Wed 2025-08-13 11:16:57 CEST Universal time: Wed 2025-08-13 09:16:57 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': michael HOME=/home/michael GROUPS=michael sudo users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/michael GROUPS=iobroker tty dialout audio video plugdev redis *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.6G 1.2G 6.9G 1.2M 481M 7.4G Swap: 536M 0B 536M Total: 9.1G 1.2G 7.5G Active iob-Instances: 13 8192 M total memory 1108 M used memory 1209 M active memory 285 M inactive memory 6625 M free memory 0 M buffer memory 459 M swap cache 512 M total swap 0 M used swap 512 M free swap *** top - Table Of Processes *** top - 11:16:58 up 2:46, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 47 total, 1 running, 46 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.3 us, 4.3 sy, 0.0 ni, 87.0 id, 0.0 wa, 0.0 hi, 4.3 si, 0.0 st MiB Mem : 8192.0 total, 6624.1 free, 1109.5 used, 459.4 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 7082.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--100--disk--0 ext4 25G 4.9G 19G 21% / none tmpfs 492K 4.0K 488K 1% /dev /dev/mapper/pve-root ext4 67G 3.9G 60G 7% /dev/ttyACM0 udev devtmpfs 32G 0 32G 0% /dev/tty tmpfs tmpfs 32G 0 32G 0% /dev/shm tmpfs tmpfs 13G 152K 13G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 32G 976K 32G 1% /tmp tmpfs tmpfs 6.3G 8.0K 6.3G 1% /run/user/1001 Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--100--disk--0 ext4 rw,relatime,stripe=16 `-/dev/ttyACM0 /dev/mapper/pve-root[/var/lib/lxc/100/devices/ttyACM0] ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 418M /var/ 213M /var/lib 130M /var/cache 126M /var/cache/apt 89M /var/lib/apt Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 24M in the file system. /opt/iobroker/backups: 1.8M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 92M /opt/iobroker/iobroker-data/ 56M /opt/iobroker/iobroker-data/files 38M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 38M /opt/iobroker/iobroker-data/files/admin.admin/custom 38M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 6.8M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-0fd47d.a444afaa.chunk.js 5.3M /opt/iobroker/iobroker-data/objects.jsonl 3.9M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.92169c09.chunk.js 3.7M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js 3.7M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-Drg0QIRU.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2432650-if00 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.4 /usr/bin/node v20.19.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.4-1nodesource1 Candidate: 22.18.0-1nodesource1 Version table: 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages *** 20.19.4-1nodesource1 100 100 /var/lib/dpkg/status 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: iobroker iobroker (version: 7.0.6, hostname: iobroker , alive, uptime: 9992) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 1 +-- iobroker.husqvarna-automower@0.6.0-beta.12 (git+ssh://git@github.com/ice987987/ioBroker.husqvarna-automower.git#e43328543d35c4555a4a3f3e595dd16417978d85) Adapter State + system.adapter.accuweather.0 : accuweather : iobroker - enabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.homeconnect.0 : homeconnect : iobroker - enabled + system.adapter.husqvarna-automower.0 : husqvarna-automower : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.lovelace.0 : lovelace : iobroker - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.openknx.0 : openknx : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : iobroker - enabled + system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.lovelace.0 : lovelace : iobroker - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "accuweather" : 2.1.0 , installed 2.1.0 Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "lovelace" : 4.1.15 , installed 4.1.15 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 18993 States: 7104 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://security.debian.org trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:42847 0.0.0.0:* LISTEN 1000 2535409 539/io.yahka.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 107 2535936 323/mosquitto tcp 0 0 127.0.0.1:41907 0.0.0.0:* LISTEN 1000 2535413 539/io.yahka.0 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 2528715 1/init tcp 0 0 127.0.0.1:34161 0.0.0.0:* LISTEN 1000 2535405 539/io.yahka.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 2535667 288/master tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 105 2535506 138/redis-server 12 tcp6 0 0 ::1:25 :::* LISTEN 0 2535668 288/master tcp6 0 0 ::1:6379 :::* LISTEN 105 2535507 138/redis-server 12 tcp6 0 0 :::36289 :::* LISTEN 1000 2535327 539/io.yahka.0 tcp6 0 0 :::33881 :::* LISTEN 1000 2535325 539/io.yahka.0 tcp6 0 0 :::1883 :::* LISTEN 107 2535937 323/mosquitto tcp6 0 0 :::32939 :::* LISTEN 1000 2535329 539/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 2532133 1/init tcp6 0 0 :::111 :::* LISTEN 0 2528717 1/init tcp6 0 0 :::8091 :::* LISTEN 1000 2535284 524/io.lovelace.0 tcp6 0 0 :::8082 :::* LISTEN 1000 2535370 569/io.web.0 tcp6 0 0 :::8080 :::* LISTEN 1001 2534659 141/node tcp6 0 0 :::8081 :::* LISTEN 1000 2534661 342/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 106 2529247 132/avahi-daemon: r udp 0 0 0.0.0.0:47975 0.0.0.0:* 106 2529249 132/avahi-daemon: r udp 0 0 0.0.0.0:51408 0.0.0.0:* 1000 2535202 494/io.openknx.0 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 2528716 1/init udp6 0 0 :::5353 :::* 106 2529248 132/avahi-daemon: r udp6 0 0 :::43720 :::* 106 2529250 132/avahi-daemon: r udp6 0 0 :::111 :::* 0 2528718 1/init *** Log File - Last 25 Lines *** 2025-08-13 09:21:13.403 - error: admin.0 (342) Automatic repository update is not allowed more than once an hour 2025-08-13 09:36:25.746 - warn: javascript.0 (398) State "mqtt.0.nuki.35C7D56C.lockAction" not found 2025-08-13 09:36:25.749 - warn: javascript.0 (398) at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2090:20) 2025-08-13 09:36:25.749 - warn: javascript.0 (398) at Object.<anonymous> (script.js.common.Zentral.Anwesenheit:29:5) 2025-08-13 09:36:25.749 - warn: javascript.0 (398) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1452:38) 2025-08-13 09:36:25.749 - warn: javascript.0 (398) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:645:29) 2025-08-13 09:36:25.749 - warn: javascript.0 (398) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/build/cjs/lib/adapter/adapter.js:7336:48) 2025-08-13 09:36:25.749 - warn: javascript.0 (398) at process.processImmediate (node:internal/timers:483:21) -
Moin,
ich habe nen PI5 mit aktueller Installation laufen und alles soweit aktuell in Iobroker
gehalten.
Leider bekomme ich das Node.js nicht mit iob nodesjs-update hochgezogen.
Es kommt keinerlei ausgabe in der ssh shell...
komischerweise zeigt auch iob diag nichts an?!? -
@lessthanmore sagte in Wir empfehlen: Node.js 22.x:
Installed: 20.19.4-1nodesource1 Candidate: 22.18.0-1nodesource1
Da ist die 22er-Quelle aktiv, dafür hängt die 20 ohne Anbindung an ein Repo da herum. Apt wird dir also nun immer die aktuelle Version aus dem 22-Zweig vorschlagen.
Und die Version ist auch nicht auf Prio 1001 gepinnt.
Das macht aber eigentlich allesiob nodejs-updatefür dich, wenn du die gewünschte Ziel-Version als Option mit gibst. -
@bigmike71 sagte in Wir empfehlen: Node.js 22.x:
komischerweise zeigt auch iob diag nichts an?
zeigen
Eingabe und (fehlende) Ausgabe bis zum nächsten Prompt
-
mike@Pi5:~ $ iob diag mike@Pi5:~ $ iob status iobroker is running on this host. Objects type: jsonl States type: jsonl mike@Pi5:~ $ iob diag mike@Pi5:~ $ mike@Pi5:~ $ iob version 7.0.7 mike@Pi5:~ $ mike@Pi5:~ $ iob diag mike@Pi5:~ $ -
@bigmike71 sagte in Wir empfehlen: Node.js 22.x:
Es kommt keinerlei ausgabe in der ssh shell...
komischerweise zeigt auch iob diag nichts an?!?Deutet auf Netzwerkprobleme hin. Beide Skripte werden jeweils frisch vom Server gezogen. 'Leider' werden aber Fehlermeldungen ausgeblendet, weswegen auch im Terminal nichts zu sehen ist.
Versuch es mal mit dem Befehl aus meiner Signatur, alternativ mit
curl -L -o diag.sh https://iobroker.net/diag.sh && bash diag.sh -
@thomas-braun
meine Netzwerk läuft hier zu 100%, was sollte da nicht richtig sein?
Systemupdate über sudo apt-get update und upgrade geht auch fehlerfrei... -
curl -L -o diag.sh https://iobroker.net/diag.sh && bash diag.sh -
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: Pi5 Icon name: computer Kernel: Linux 6.6.47+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 11:33:50 up 51 min, 1 user, load average: 0.49, 0.43, 0.42 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-08-13 11:33:50 CEST Universal time: Wed 2025-08-13 09:33:50 UTC RTC time: Wed 2025-08-13 09:33:50 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': mike HOME=/home/mike GROUPS=mike adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 2.7G 3.6G 11M 2.3G 5.8G Swap: 209M 0B 209M Total: 8.6G 2.7G 3.8G Active iob-Instances: 21 8048 M total memory 2551 M used memory 2817 M active memory 1378 M inactive memory 3424 M free memory 163 M buffer memory 2017 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 11:33:51 up 51 min, 1 user, load average: 0.49, 0.43, 0.42 Tasks: 201 total, 1 running, 200 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 50.0 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8048.3 total, 3423.9 free, 2551.9 used, 2181.0 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 5496.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * nvmf-autoconnect.service loaded failed failed Connect NVMe-oF subsystems automatically during boot LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.8G 0 3.8G 0% /dev tmpfs tmpfs 1.6G 5.5M 1.6G 1% /run /dev/nvme0n1p2 ext4 229G 19G 199G 9% / tmpfs tmpfs 4.0G 5.6M 4.0G 1% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/nvme0n1p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 805M 0 805M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Aug 13 10:42:34 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:32:C2:78 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=6fe73f65-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Aug 13 10:42:37 2025] EXT4-fs (nvme0n1p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Wed Aug 13 10:42:38 2025] EXT4-fs (nvme0n1p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p2 ext4 rw,noatime `-/boot/firmware /dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 8.1G /var/ 3.6G /var/log 3.5G /var/log/journal/e2767c797fed49779b649eddbed462f7 3.5G /var/log/journal 3.1G /var/cache/apt Archived and active journals take up 3.4G in the file system. /opt/iobroker/backups: 108M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 229M /opt/iobroker/iobroker-data/ 123M /opt/iobroker/iobroker-data/files 84M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 20M /opt/iobroker/iobroker-data/objects.jsonl 8.6M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 3.7M /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-DXg_kRe6.js 3.7M /opt/iobroker/iobroker-data/files/hmip.admin/custom/assets/index-HTN9Fhdh.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_b44d6fa857a4ed1180ce8a582981d5c7-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.4 /usr/bin/node v20.19.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.4-1nodesource1 Candidate: 20.19.4-1nodesource1 Version table: *** 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Need to install the following packages: is-my-node-vulnerable@1.6.1 Ok to proceed? (y) y █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Pi5 Pi5 (version: 7.0.7, hostname: Pi5 , alive, uptime: 2342) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 9.0.11 nodejs modules from github: 2 +-- iobroker.govee-app@0.0.3 (git+ssh://git@github.com/TA2k/ioBroker.govee-app.git#f7848a9817a15db547dd5fc7f332822752d9bed6) `-- iobroker.zigbee@3.0.3 (git+ssh://git@github.com/ioBroker/ioBroker.zigbee.git#ff370acc5c61473cc0a008ff15a1f244a9bb73ee) Adapter State + system.adapter.admin.0 : admin : Pi5 - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.airquality.0 : airquality : Pi5 - disabled + system.adapter.ankersolix2.0 : ankersolix2 : Pi5 - enabled + system.adapter.backitup.0 : backitup : Pi5 - enabled + system.adapter.denon.0 : denon : Pi5 - enabled + system.adapter.enigma2.0 : enigma2 : Pi5 - enabled + system.adapter.govee-app.0 : govee-app : Pi5 - enabled system.adapter.govee-local.0 : govee-local : Pi5 - disabled + system.adapter.hmip.0 : hmip : Pi5 - enabled system.adapter.homeconnect.0 : homeconnect : Pi5 - disabled + system.adapter.hue.0 : hue : Pi5 - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : Pi5 - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : Pi5 - enabled, port: 8086 system.adapter.influxdb.2 : influxdb : Pi5 - disabled, port: 8086 + system.adapter.iot.0 : iot : Pi5 - enabled + system.adapter.javascript.0 : javascript : Pi5 - enabled system.adapter.lgtv.0 : lgtv : Pi5 - disabled + system.adapter.modbus.0 : modbus : Pi5 - enabled system.adapter.modbus.1 : modbus : Pi5 - disabled system.adapter.myuplink.0 : myuplink : Pi5 - disabled + system.adapter.rpi2.0 : rpi2 : Pi5 - enabled + system.adapter.shelly.0 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Pi5 - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Pi5 - enabled, port: 1884, bind: 0.0.0.0 system.adapter.twinkly.0 : twinkly : Pi5 - disabled system.adapter.whatsapp-cmb.0 : whatsapp-cmb : Pi5 - disabled + system.adapter.zigbee.0 : zigbee : Pi5 - enabled, port: /dev/ttyUSB0 + system.adapter.zigbee.1 : zigbee : Pi5 - enabled, port: tcp://192.168.0.176:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Pi5 - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hue.0 : hue : Pi5 - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : Pi5 - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : Pi5 - enabled, port: 8086 + system.adapter.shelly.0 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Pi5 - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Pi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.zigbee.0 : zigbee : Pi5 - enabled, port: /dev/ttyUSB0 + system.adapter.zigbee.1 : zigbee : Pi5 - enabled, port: tcp://192.168.0.176:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "airquality" : 0.1.5 , installed 0.1.5 Adapter "ankersolix2" : 2.2.0 , installed 2.2.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "enigma2" : 2.2.3 , installed 2.2.3 Adapter "govee-local" : 0.2.8 , installed 0.2.8 Adapter "hmip" : 1.27.0 , installed 1.27.0 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.6.0 , installed 3.6.0 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "lgtv" : 2.4.0 , installed 2.4.0 Adapter "modbus" : 6.4.0 , installed 6.4.0 Adapter "myuplink" : 0.8.4 , installed 0.8.4 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 10.1.0 , installed 10.1.0 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "twinkly" : 1.0.14 , installed 1.0.14 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "zigbee" : 3.0.3 , installed 3.0.3 Objects and States Please stand by - This may take a while Objects: 8338 States: 6601 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 66414 60339/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 68265 61131/io.shelly.1 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 65007 59763/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 65002 59763/iobroker.js-c tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 999 6656 961/pihole-FTL tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 999 6655 961/pihole-FTL tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 999 1992 961/pihole-FTL tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6328 853/sshd: /usr/sbin tcp 0 0 127.0.0.1:61209 0.0.0.0:* LISTEN 0 7219 836/python3 tcp6 0 0 :::443 :::* LISTEN 999 6658 961/pihole-FTL tcp6 0 0 :::80 :::* LISTEN 999 6657 961/pihole-FTL tcp6 0 0 :::53 :::* LISTEN 999 1994 961/pihole-FTL tcp6 0 0 :::22 :::* LISTEN 0 6330 853/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 69944 61166/io.simple-api tcp6 0 0 :::8086 :::* LISTEN 995 6668 909/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 63399 59781/io.admin.0 tcp6 0 0 :::3000 :::* LISTEN 106 6712 1025/grafana udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 1798 706/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 65490 60310/io.shelly.0 udp 0 0 0.0.0.0:43039 0.0.0.0:* 1001 137700 60310/io.shelly.0 udp 0 0 0.0.0.0:60398 0.0.0.0:* 104 1800 706/avahi-daemon: r udp 0 0 0.0.0.0:53 0.0.0.0:* 999 1991 961/pihole-FTL udp 0 0 0.0.0.0:123 0.0.0.0:* 999 9268 961/pihole-FTL udp6 0 0 :::5353 :::* 104 1799 706/avahi-daemon: r udp6 0 0 :::34332 :::* 104 1801 706/avahi-daemon: r udp6 0 0 :::53 :::* 999 1993 961/pihole-FTL udp6 0 0 :::123 :::* 999 5936 961/pihole-FTL *** Log File - Last 25 Lines *** 2025-08-13 11:33:15.110 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:33:32.234 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:33:32.290 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:33:32.334 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:33:35.920 - info: influxdb.0 (59873) Store 23 buffered influxDB history points 2025-08-13 11:33:55.130 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string" 2025-08-13 11:33:55.176 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string" 2025-08-13 11:33:55.232 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind" has to be type "number" but received type "string" 2025-08-13 11:33:55.274 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:33:55.356 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:33:55.403 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:34:05.921 - info: influxdb.0 (59873) Store 29 buffered influxDB history points 2025-08-13 11:34:11.383 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Info.Solarenergie_Woche" has to be type "number" but received type "string" 2025-08-13 11:34:12.170 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string" 2025-08-13 11:34:12.221 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string" 2025-08-13 11:34:12.272 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:34:12.316 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:34:12.358 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:34:29.105 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string" 2025-08-13 11:34:29.161 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string" 2025-08-13 11:34:29.235 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind" has to be type "number" but received type "string" 2025-08-13 11:34:29.282 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:34:29.329 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:34:29.378 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:34:29.433 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Sonnenstrahlung" has to be type "number" but received type "string"============ Mark until here for C&P =============
iob diag has finished.
mike@Pi5:~ $ ^C
mike@Pi5:~ $ -
Da fehlt der Anfang.
