Wir empfehlen: Node.js 22.x

BananaJoe

Der Adapter alexa-timer-vis https://github.com/MiRo1310/ioBroker.alexa-timer-vis ist auch nicht kompatibel mit Node.js 22, ich werde da auch noch ein Issue eröffnen

https://github.com/MiRo1310/ioBroker.alexa-timer-vis/issues/210

BananaJoe

Beim Adapter echarts https://github.com/ioBroker/ioBroker.echarts funktioniert das Server side rendering mit Node.js 22 nicht mehr, die Diagramme in VIS1 sahen gut aus.
https://github.com/ioBroker/ioBroker.echarts/issues/925

BananaJoe

@thomas-braun sagte in Wir empfehlen: Node.js 22.x:

Falls es wider Erwarten mit nodejs@22 noch bei einzelnen Adaptern Probleme geben sollte kann man die alte Version so wieder installieren:
iob nodejs-update 20

Wer den SQL-Adapter einsetzt muss diesen nach einem Downgrade mit

iob upgrade sql@3.0.1

einmal neu installieren, bei mir hat er es nicht von alleine wieder geschafft zu starten. Der Befehl deinstalliert den Adapter und installiert diesen gleich wieder neu, danach funktionierte er wieder.

haselchen

@apollon77

Werden die Entwickler von euch informiert ihre Adapter anzupassen?
Oder läuft das so:
Ihr empfehlt -> wir merken das was nicht funktioniert -> erstellen ein Issue -> wenns gut läuft arbeitet der Entwickler es ab ?

Thomas Braun

@haselchen

Beides. Seit geraumer Zeit werden Issues bei den Adaptern eröffnet, das der Code auch mit nodejs@22 und nodejs@24 getestet werden soll. Und auch die automatisierten Testsuites beinhalten entsprechendes.

Aber damit kann nicht alles automatisiert getestet werden. Insbesondere bei 'Nischen'-Adaptern mit 2 Dutzend Installationen (oder mutmaßlich verwaisten Adaptern) kann es da schon mal klemmen. Da sollten dann individuelle Issues eröffnet werden.

Mutanten

@apollon77

Habe iob nodejs-update ausgeführt und er hat auch von 20 auf 22 upgedatet, jedoch nur auf 22.15.0
bei wiederholter Eingabe wird auch wird auch angezeigt das es die 22.18.0 gibt:

Recommended nodejs-version is: 22.18.0
Checking your installation now. Please be patient!
Your current setup is:
/usr/bin/nodejs         v22.15.0
/usr/bin/node           v22.15.0
/usr/bin/npm            10.9.2
/usr/bin/npx            10.9.2
/usr/bin/corepack       0.32.0
We found these nodejs versions available for installation:
nodejs:
  Installed: 22.15.0-1nodesource1
  Candidate: 22.15.0-1nodesource1
  Version table:
 *** 22.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     22.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.4.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main armhf Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org/debian-security bookworm-security/main armhf Packages
Nothing to do - Your installation is using the correct paths.
You are running nodejs v22.15.0. Do you want to install recommended version 22.18.0?

Jedoch wird diese nicht installiert:

Press <y> to continue or any other key to quit
Trying to fix your installation now. Please be patient.
rm: cannot remove '/usr/share/keyrings/nodesource.gpg'$'\n''/etc/apt/keyrings/nodesource.gpg 2> /dev/null': No such file or directory
Stopping ioBroker now
####
ioBroker has been stopped
Removing dfsg-nodejs
*** These repos are active on your system:
Hit:1 http://security.debian.org/debian-security bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian buster InRelease
Reading package lists... Done
*** Installing ca-certificates, curl and gnupg, just in case they are missing.
*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source
deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_22.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001
*** These repos are active after the adjustments:
Hit:1 http://security.debian.org/debian-security bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian buster InRelease
Get:5 https://deb.nodesource.com/node_22.x nodistro InRelease [12.1 kB]
Get:6 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages [6705 B]
Fetched 18.8 kB in 2s (8795 B/s)
Reading package lists... Done
Installing nodejs now!
Installing latest nodejs v22 release
SUCCESS!
v22.15.0 has been installed! You are using the latest nodejs@22 release now!
COMPATIBILITY CHECK IN PROGRESS (Only a --dry-run! No modules are really changed or added!)
add fsevents 2.3.3
added 1 package in 7s
257 packages are looking for funding
  run `npm fund` for details
We tried our best to fix your nodejs. Please run iob diag again to verify.

iob diag spukt folgendes aus

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: raspberrypi-dashboard
       Icon name: computer
          Kernel: Linux 5.10.103-v7l+
    Architecture: arm
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 13:21:06 up  2:14,  3 users,  load average: 2.40, 1.59, 1.49
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
~ Under-voltage has occurred

*** TIME AND TIMEZONES ***
               Local time: Tue 2025-08-12 13:21:06 CEST
           Universal time: Tue 2025-08-12 11:21:06 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Display-Manager:        * lightdm.service - Light Display Manager
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.5G        1.5G        929K        1.2G        2.5G
Swap:           2.1G          0B        2.1G
Total:          6.2G        1.5G        3.7G

Active iob-Instances:   19

         3838 M total memory
         1462 M used memory
          685 M active memory
         1478 M inactive memory
         1438 M free memory
          340 M buffer memory
          761 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 13:21:07 up  2:14,  3 users,  load average: 2.40, 1.59, 1.49
Tasks: 165 total,   3 running, 162 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 16.7 sy,  0.0 ni, 83.3 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3838.7 total,   1437.8 free,   1463.8 used,   1102.6 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   2374.9 avail Mem

*** FAILED SERVICES ***

  UNIT                  LOAD   ACTIVE SUB    DESCRIPTION
* bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper
* influxdb.service      loaded failed failed InfluxDB is an open-source, distributed, time series database

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   14G   15G  50% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     768M  848K  767M   1% /run
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   50M  203M  20% /boot
tmpfs          tmpfs     384M   28K  384M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Aug 12 11:06:13 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:EA:23:4A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=31dab8ea-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Tue Aug 12 11:06:14 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Aug 12 11:06:14 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Aug 12 11:06:17 2025] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems:
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
3.3G    /var/
826M    /var/log
777M    /var/log/journal/d095af32df8b433fb0cbfdb5e85b78d0
777M    /var/log/journal
213M    /var/lib

Archived and active journals take up 776.4M in the file system.

/opt/iobroker/backups:
380M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
519M    /opt/iobroker/iobroker-data/
218M    /opt/iobroker/iobroker-data/files
151M    /opt/iobroker/iobroker-data/backup-objects
99M     /opt/iobroker/iobroker-data/History
47M     /opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
22M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/s7.admin/static/js/main.9f443724.js.map
14M     /opt/iobroker/iobroker-data/states.jsonl
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.15.0
/usr/bin/node           v22.15.0
/usr/bin/npm            10.9.2
/usr/bin/npx            10.9.2
/usr/bin/corepack       0.32.0

nodejs:
  Installed: 22.15.0-1nodesource1
  Candidate: 22.15.0-1nodesource1
  Version table:
 *** 22.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     22.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.4.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     22.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main armhf Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main armhf Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org/debian-security bookworm-security/main armhf Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


██████   █████  ███    ██  ██████  ███████ ███████
██   ██ ██   ██ ████   ██ ██       ██      ██   ██
██   ██ ███████ ██ ██  ██ ██   ███ █████   ███████
██   ██ ██   ██ ██  ██ ██ ██    ██ ██      ██   ██
██████  ██   ██ ██   ████  ██████  ███████ ██   ██


The current Node.js version (v22.15.0) is vulnerable to the following CVEs:

CVE-2025-23166(high):  The C++ method SignTraits::DeriveBits() may incorrectly call ThrowException() based on user-supplied inputs when executing in a background thread, crashing the Node.js process. Such cryptographic operations are commonly applied to untrusted inputs. Thus, this mechanism potentially allows an adversary to remotely crash a Node.js runtime.
Patched versions: ^20.19.2 || ^22.15.1 || ^23.11.1 || ^24.0.2
=

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspberrypi-dashboard raspberrypi-dashboard (version: 7.0.6, hostname: raspberrypi-dashboard, alive, uptime: 155)

Core adapters versions
js-controller:  7.0.6
admin:          7.6.17
javascript:     8.9.2

nodejs modules from github:     3
+-- iobroker.renault@0.0.22 (git+ssh://git@github.com/TA2k/ioBroker.renault.git#93de058900073dc703b24502ff289003610aac5f)
+-- iobroker.vw-connect@0.7.12 (git+ssh://git@github.com/ta2k/ioBroker.vw-connect.git#d59d3f600b8fc35deb9a82ca1da66a285d02ea42)
`-- iobroker.zoe2@0.2.11 (git+ssh://git@github.com/fungus75/ioBroker.zoe2.git#b925f4abcb587c30c919de011271a670667ce915)

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi-dashboard                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi-dashboard                    -  enabled
  system.adapter.discovergy.0             : discovergy            : raspberrypi-dashboard                    - disabled
  system.adapter.discovery.0              : discovery             : raspberrypi-dashboard                    - disabled
+ system.adapter.e3dc-rscp.0              : e3dc-rscp             : raspberrypi-dashboard                    -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi-dashboard                    - disabled
+ system.adapter.fritzdect.0              : fritzdect             : raspberrypi-dashboard                    -  enabled
+ system.adapter.fronius-solarweb.0       : fronius-solarweb      : raspberrypi-dashboard                    -  enabled
+ system.adapter.fronius.0                : fronius               : raspberrypi-dashboard                    -  enabled
+ system.adapter.history.0                : history               : raspberrypi-dashboard                    -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : raspberrypi-dashboard                    - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : raspberrypi-dashboard                    - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi-dashboard                    -  enabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi-dashboard                    -  enabled
+ system.adapter.operating-hours.0        : operating-hours       : raspberrypi-dashboard                    -  enabled
+ system.adapter.parser.0                 : parser                : raspberrypi-dashboard                    -  enabled
+ system.adapter.renault.0                : renault               : raspberrypi-dashboard                    -  enabled
+ system.adapter.s7.0                     : s7                    : raspberrypi-dashboard                    -  enabled
+ system.adapter.solarlog.0               : solarlog              : raspberrypi-dashboard                    -  enabled, port: 80
+ system.adapter.tibberlink.0             : tibberlink            : raspberrypi-dashboard                    -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : raspberrypi-dashboard                    - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi-dashboard                    - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi-dashboard                    -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi-dashboard                    - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspberrypi-dashboard                    - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi-dashboard                    - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi-dashboard                    -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : raspberrypi-dashboard                    -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi-dashboard                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.zoe2.0                   : zoe2                  : raspberrypi-dashboard                    -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi-dashboard                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.solarlog.0               : solarlog              : raspberrypi-dashboard                    -  enabled, port: 80
+ system.adapter.web.0                    : web                   : raspberrypi-dashboard                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name               │ url                                                     │ auto upgrade │
├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'Beta (latest)'    │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): Stable (default)
Upgrade policy: minor

Installed ioBroker-Adapters
Used repository: Stable (default)
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "discovergy"   : 0.5.13   , installed 0.5.13
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "e3dc-rscp"    : 1.4.2    , installed 1.4.2
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "fronius"      : 2.1.1    , installed 2.1.1
Adapter    "fronius-solarweb": 0.0.3 , installed 0.1.0
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "operating-hours": 1.3.0  , installed 1.3.0
Adapter    "parser"       : 2.2.4    , installed 2.2.4
Adapter    "s7"           : 1.4.3    , installed 1.4.3
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "solarlog"     : 2.3.0    , installed 2.3.0
Adapter    "tibberlink"   : 5.0.0    , installed 5.0.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        9525
States:         8156

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian buster InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:53            0.0.0.0:*               LISTEN      0          14624      491/connmand
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13574      575/sshd: /usr/sbin
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          13546      534/cupsd
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          12275      896/exim4
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       143484     27043/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       143479     27043/iobroker.js-c
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       141875     27065/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       143835     27381/io.web.0
tcp6       0      0 ::1:53                  :::*                    LISTEN      0          14628      491/connmand
tcp6       0      0 :::22                   :::*                    LISTEN      0          13576      575/sshd: /usr/sbin
tcp6       0      0 ::1:3350                :::*                    LISTEN      0          14522      541/xrdp-sesman
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          13545      534/cupsd
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          12276      896/exim4
tcp6       0      0 :::3389                 :::*                    LISTEN      116        13081      568/xrdp
udp        0      0 127.0.0.1:53            0.0.0.0:*                           0          14616      491/connmand
udp        0      0 0.0.0.0:35394           0.0.0.0:*                           0          12130      491/connmand
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12285      440/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13407      376/avahi-daemon: r
udp        0      0 0.0.0.0:53516           0.0.0.0:*                           108        13409      376/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          15506      440/dhcpcd
udp6       0      0 ::1:53                  :::*                                0          14620      491/connmand
udp6       0      0 :::5353                 :::*                                108        13408      376/avahi-daemon: r
udp6       0      0 :::47441                :::*                                108        13410      376/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-08-12 13:20:17.288  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:17.289  - info: fritzdect.0 (27278) create Main object DECT_ 113240165432-1 Rauchmelder Garage switch
2025-08-12 13:20:17.909  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:17.909  - info: fritzdect.0 (27278) create Main object DECT_ 139790430399 Taster Tschinkel thermo
2025-08-12 13:20:18.341  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:18.342  - info: fritzdect.0 (27278) create Main object DECT_ 139790456408 Tschinkel Küche thermo.heat
2025-08-12 13:20:18.990  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:18.990  - info: fritzdect.0 (27278) create Main object DECT_ 139790456383 Tschinkel Wohnzimmer thermo.heat
2025-08-12 13:20:19.492  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:19.492  - info: fritzdect.0 (27278) create Main object DECT_ 116300448324 Spülmaschine switch
2025-08-12 13:20:20.039  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:20.039  - info: fritzdect.0 (27278) create Main object DECT_ 152820284349-1 MK Terrassentür switch
2025-08-12 13:20:20.318  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:20.319  - info: fritzdect.0 (27278) create Main object DECT_ 139790786726 Heizung Bad Handtuchhalter thermo.heat
2025-08-12 13:20:21.003  - info: fritzdect.0 (27278) ____________________________________________
2025-08-12 13:20:21.003  - info: fritzdect.0 (27278) create Main object DECT_ 116300480469 Heizstab Heizung Bad switch
2025-08-12 13:20:21.532  - info: fritzdect.0 (27278) finished creating devices/groups (if any)
2025-08-12 13:20:21.532  - info: fritzdect.0 (27278) templates are not used (true)
2025-08-12 13:20:21.533  - info: fritzdect.0 (27278) routines are used(false)
2025-08-12 13:20:21.533  - info: fritzdect.0 (27278) start creating routines
2025-08-12 13:20:21.988  - info: fritzdect.0 (27278) finished creating routines (if any)
2025-08-12 13:20:21.989  - info: fritzdect.0 (27278) start initial updating devices/groups
2025-08-12 13:20:25.629  - info: fritzdect.0 (27278) finished initial updating devices/groups
2025-08-12 13:20:25.629  - info: fritzdect.0 (27278) going over to cyclic polling, messages to poll activity only in debug-mode
2025-08-12 13:20:26.720  - info: vw-connect.0 (27368) No last shorterm trips found. Please check if your car supports shortterm trips. Block fetching for:WVGZZZE29SP503026

Die Danger Meldung habe ich gesehen, kann damit jedoch nichts anfangen, bin kein Linux Spezialist, kämpfe mich so durch.

Ich hoffe du kannst mir helfen.

Danke und Gruß, Michael

Mod-Edit
Code-Tags repariert

Thomas Braun

@mutanten sagte in Wir empfehlen: Node.js 22.x:

Ich hoffe du kannst mir helfen.

Nein, kann ich nicht.
Das liegt an der von dir verwendeten 32Bit-Version.
Installier das ganze Ding komplett neu als reines 64Bit-System.

Dann würde auch der aktuelle Kernel geladen und nicht der von Raspberry 11 noch.
In-line-Upgrades funktionieren von 11 auf 12 NICHT!

iobroker2001

Das Update ist bei mir erfolgreich durchgelaufen, alles klappt, AUSSER der Adapter CUL/culfw
Der Adapter bleibt auf rot stehen.

cul.0
	2025-08-12 18:02:14.577	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason
cul.0
	2025-08-12 18:02:14.576	info	terminating
cul.0
	2025-08-12 18:02:14.567	error	Exception-Code: ERR_DLOPEN_FAILED: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 115. This version of Node.js requiresNODE_MODULE_VERSION 127. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).
cul.0
	2025-08-12 18:02:14.567	error	Error: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 115. This version of Node.js requiresNODE_MODULE_VERSION 127. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`). at Object..node (node:internal/modules/cjs/loader:1846:18) at Module.load (node:internal/modules/cjs/loader:1423:32) at Function._load (node:internal/modules/cjs/loader:1246:12) at TracingChannel.traceSync (node:diagnostics_channel:322:14) at wrapModuleLoad (node:internal/modules/cjs/loader:235:24) at Module.require (node:internal/modules/cjs/loader:1445:12) at require (node:internal/modules/helpers:135:16) at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48) at Object.<anonymous> (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:2:36) at Module._compile (node:internal/modules/cjs/loader:1688:14)
cul.0
	2025-08-12 18:02:14.566	error	uncaught exception: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 115. This version of Node.js requiresNODE_MODULE_VERSION 127. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).
cul.0
	2025-08-12 18:02:14.481	info	starting. Version 2.2.0 in /opt/iobroker/node_modules/iobroker.cul, node: v22.18.0, js-controller: 7.0.6

Thomas Braun

@iobroker2001

Da müssen Komponenten neugebaut werden. Mal deinstallieren und wieder drauf, dann sollte das automatisch passieren.

iobroker2001

@thomas-braun @thomas-braun Vielen Dank, das hat funktioniert!
Möglicherweise lag es sogar nur daran, dass nach dem Update die vorgewählte serielle Schnittstelle in den Adaptereinstellung geleert wurde, sprich neu ausgewählt werden musste.

Thomas Braun

@iobroker2001
Nein, es lag daran:

The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 115. This version of Node.js requires NODE_MODULE_VERSION 127.

Das ist jetzt gegen NODE_MODULE_VERSION 127 gebaut worden und dann läuft das auch wieder.

lessthanmore

zigbee2mqtt ist wohl noch nicht soweit:


zigbee2mqtt.0
2025-08-12 19:37:59.781	error	z2m: Could not init sd_notify: The module '/opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.6/node_modules/unix-dgram/build/Release/unix_dgram.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 115. This version of Node.js requires NODE_MODULE_VERSION 127. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`).

zigbee2mqtt.0
2025-08-12 19:36:18.708	error	z2m: Could not init sd_notify: The module '/opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.6/node_modules/unix-dgram/build/Release/unix_dgram.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 115. This version of Node.js requiresNODE_MODULE_VERSION 127. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`).

Obwohl alles bislang offensichtlich funktioniert.

Thomas Braun

@lessthanmore

Da gilt auch:

Da müssen Komponenten neugebaut werden. Mal deinstallieren und wieder drauf, dann sollte das automatisch passieren.

lessthanmore

@thomas-braun Leider nein, Fehler bleibt.

npm rebuild

endet ebenfalls mit dem Code 127.

Zurück auf 20 mittels

iob nodejs-update 20

resultiert in

Installing nodejs now!

Installing latest nodejs v20 release
W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details

SUCCESS!
v22.18.0 has been installed! You are using the latest nodejs@20 release now!

Thomas Braun

@lessthanmore sagte in Wir empfehlen: Node.js 22.x:

resultiert in
v22.18.0 has been installed! You are using the latest nodejs@20 release now!

Dann stimmt da irgendwas wohl grundsätzlich mit deinem nodejs nicht.

Ich hab gerade nochmal auf meinem Testsystem alles auf 20 gedrückt:


SUCCESS!
v20.19.4 has been installed! You are using the latest nodejs@20 release now!

Die Meldung passt.

Und zigbee2mqtt baut bei mir auch mit nodejs22:

2025-08-13 08:26:00.332  - info: zigbee2mqtt.0 (105824) starting. Version 3.0.9 in /opt/iobroker/node_modules/iobroker.zigbee2mqtt, node: v22.18.0, js-controller: 7.0.7
2025-08-13 08:26:00.360  - info: zigbee2mqtt.0 (105824) ================================= Adapter Config =================================
2025-08-13 08:26:00.361  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Scheme: http
2025-08-13 08:26:00.362  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Server: 
2025-08-13 08:26:00.362  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Port: 8080
2025-08-13 08:26:00.363  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Connection Type: ws
2025-08-13 08:26:00.363  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Scheme: ws
2025-08-13 08:26:00.363  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Server: 
2025-08-13 08:26:00.364  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Port: 8080
2025-08-13 08:26:00.365  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Auth-Token: unused
2025-08-13 08:26:00.365  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Dummy MQTT-Server: deactivated
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Debug Log: deactivated
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Proxy Zigbee2MQTT Logs to ioBroker Logs: activated
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Use Kelvin: no
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Use ColorTemperature ColorSync: no
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Use BrightnessMove OnOff: no
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use BrightnessStep OnOff: no
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Event In Desc: yes
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Device Icons: no
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Simple Hold/Release State: yes
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Simple Move/Stop State: no
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Use Simple Press/Release State: no
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Use Automatic Coordinator Check: no
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Coordinator Check Loglevel: info
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Coordinator Check Cron : 0 3 * * *
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) ==================================================================================
2025-08-13 08:26:00.434  - warn: zigbee2mqtt.0 (105824) Please configure the Websoket connection!

Ist halt bei mir nicht konfiguriert, aber die Module werden gebaut.

lessthanmore

@thomas-braun Ja, bauen/ laufen ist kein Problem. Wirft aber dennoch die Meldungen.
Hatte den Adapter gelöscht und neu installiert + reboot. Keine Änderung.

Bin jetzt mit der "alten Anleitung" zurück auf 20.

skvarel

Danke!

iob nodejs-update hat geklappt.

(Raspberry4 mit Bookworm)

PlatformBetriebssystem:linux
Architektur:arm64
CPUs:4
Geschwindigkeit:1800 MHz
Modell:Cortex-A72
RAM:7.6 GB
System-Betriebszeit:00:04:40
Node.js:v22.18.0
Zeit:1755067963199
Zeitversatz:-120
NPM:10.9.3
Adapter-Anzahl:667
Datenträgergröße:234.3 GB
Freier Festplattenspeicher:227.6 GB
Aktive Instanzen:46
Pfad:/opt/iobroker/
Betriebszeit:00:04:40
aktiv:true
_nodeCurrent:22.18.0
_nodeNewest:22.18.0
_nodeNewestNext:22.18.0
_npmCurrent:10.9.3
_npmNewest:10.9.3
_npmNewestNext:10.9.3

Thomas Braun

@lessthanmore sagte in Wir empfehlen: Node.js 22.x:

Bin jetzt mit der "alten Anleitung" zurück auf 20.

Ich bin immer noch der Meinung, das du dann da eine 'komische' Installation hast.

lessthanmore

@thomas-braun

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: iobroker
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
          Kernel: Linux 6.14.8-2-pve
    Architecture: x86-64
OS is similar to: 

model name	: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 11:16:57 up  2:46,  1 user,  load average: 0.00, 0.00, 0.00
CPU threads: 2


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-08-13 11:16:57 CEST
           Universal time: Wed 2025-08-13 09:16:57 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
michael
HOME=/home/michael
GROUPS=michael sudo users iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/michael
GROUPS=iobroker tty dialout audio video plugdev redis

*** DISPLAY-SERVER SETUP ***
Display-Server: 	false
Unit display-manager.service could not be found.
Display-Manager: 	
Desktop: 		
Session: 		tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.6G        1.2G        6.9G        1.2M        481M        7.4G
Swap:           536M          0B        536M
Total:          9.1G        1.2G        7.5G

Active iob-Instances: 	13

         8192 M total memory
         1108 M used memory
         1209 M active memory
          285 M inactive memory
         6625 M free memory
            0 M buffer memory
          459 M swap cache
          512 M total swap
            0 M used swap
          512 M free swap

*** top - Table Of Processes  ***
top - 11:16:58 up  2:46,  1 user,  load average: 0.00, 0.00, 0.00
Tasks:  47 total,   1 running,  46 sleeping,   0 stopped,   0 zombie
%Cpu(s):  4.3 us,  4.3 sy,  0.0 ni, 87.0 id,  0.0 wa,  0.0 hi,  4.3 si,  0.0 st 
MiB Mem :   8192.0 total,   6624.1 free,   1109.5 used,    459.4 buff/cache     
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   7082.5 avail Mem 

*** FAILED SERVICES ***

  UNIT                 LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem                       Type      Size  Used Avail Use% Mounted on
/dev/mapper/pve-vm--100--disk--0 ext4       25G  4.9G   19G  21% /
none                             tmpfs     492K  4.0K  488K   1% /dev
/dev/mapper/pve-root             ext4       67G  3.9G   60G   7% /dev/ttyACM0
udev                             devtmpfs   32G     0   32G   0% /dev/tty
tmpfs                            tmpfs      32G     0   32G   0% /dev/shm
tmpfs                            tmpfs      13G  152K   13G   1% /run
tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs                            tmpfs      32G  976K   32G   1% /tmp
tmpfs                            tmpfs     6.3G  8.0K  6.3G   1% /run/user/1001

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET         SOURCE                                                 FSTYPE OPTIONS
/              /dev/mapper/pve-vm--100--disk--0                       ext4   rw,relatime,stripe=16
`-/dev/ttyACM0 /dev/mapper/pve-root[/var/lib/lxc/100/devices/ttyACM0] ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
418M	/var/
213M	/var/lib
130M	/var/cache
126M	/var/cache/apt
89M	/var/lib/apt

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 24M in the file system.

/opt/iobroker/backups:
1.8M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
92M	/opt/iobroker/iobroker-data/
56M	/opt/iobroker/iobroker-data/files
38M	/opt/iobroker/iobroker-data/files/admin.admin/custom/assets
38M	/opt/iobroker/iobroker-data/files/admin.admin/custom
38M	/opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
6.8M	/opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-0fd47d.a444afaa.chunk.js
5.3M	/opt/iobroker/iobroker-data/objects.jsonl
3.9M	/opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.92169c09.chunk.js
3.7M	/opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js
3.7M	/opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-Drg0QIRU.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2432650-if00

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs 	v20.19.4
/usr/bin/node 		v20.19.4
/usr/bin/npm 		10.8.2
/usr/bin/npx 		10.8.2
/usr/bin/corepack 	0.32.0

nodejs:
  Installed: 20.19.4-1nodesource1
  Candidate: 22.18.0-1nodesource1
  Version table:
     22.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
 *** 20.19.4-1nodesource1 100
        100 /var/lib/dpkg/status
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: redis
States  type: redis

Hosts:
iobroker            iobroker (version: 7.0.6, hostname: iobroker      , alive, uptime: 9992)

Core adapters versions
js-controller: 	7.0.6
admin: 		7.6.17
javascript: 	8.9.2

nodejs modules from github: 	1
+-- iobroker.husqvarna-automower@0.6.0-beta.12 (git+ssh://git@github.com/ice987987/ioBroker.husqvarna-automower.git#e43328543d35c4555a4a3f3e595dd16417978d85)

Adapter State
+ system.adapter.accuweather.0            : accuweather           : iobroker                                 -  enabled
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.homeconnect.0            : homeconnect           : iobroker                                 -  enabled
+ system.adapter.husqvarna-automower.0    : husqvarna-automower   : iobroker                                 -  enabled
  system.adapter.ical.0                   : ical                  : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.openknx.0                : openknx               : iobroker                                 -  enabled
+ system.adapter.pushover.0               : pushover              : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : iobroker                                 -  enabled
+ system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : iobroker                                 -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "accuweather"  : 2.1.0    , installed 2.1.0
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "homeconnect"  : 1.4.3    , installed 1.4.3
Adapter    "ical"         : 1.16.2   , installed 1.16.2
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "lovelace"     : 4.1.15   , installed 4.1.15
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "openknx"      : 0.9.0    , installed 0.9.0
Adapter    "pushover"     : 4.1.0    , installed 4.1.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "yahka"        : 1.0.3    , installed 1.0.3
Adapter    "zigbee2mqtt"  : 3.0.9    , installed 3.0.9

Objects and States
Please stand by - This may take a while
Objects: 	18993
States: 	7104

*** OS-Repositories and Updates ***
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:42847         0.0.0.0:*               LISTEN      1000       2535409    539/io.yahka.0      
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      107        2535936    323/mosquitto       
tcp        0      0 127.0.0.1:41907         0.0.0.0:*               LISTEN      1000       2535413    539/io.yahka.0      
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          2528715    1/init              
tcp        0      0 127.0.0.1:34161         0.0.0.0:*               LISTEN      1000       2535405    539/io.yahka.0      
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          2535667    288/master          
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      105        2535506    138/redis-server 12 
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          2535668    288/master          
tcp6       0      0 ::1:6379                :::*                    LISTEN      105        2535507    138/redis-server 12 
tcp6       0      0 :::36289                :::*                    LISTEN      1000       2535327    539/io.yahka.0      
tcp6       0      0 :::33881                :::*                    LISTEN      1000       2535325    539/io.yahka.0      
tcp6       0      0 :::1883                 :::*                    LISTEN      107        2535937    323/mosquitto       
tcp6       0      0 :::32939                :::*                    LISTEN      1000       2535329    539/io.yahka.0      
tcp6       0      0 :::22                   :::*                    LISTEN      0          2532133    1/init              
tcp6       0      0 :::111                  :::*                    LISTEN      0          2528717    1/init              
tcp6       0      0 :::8091                 :::*                    LISTEN      1000       2535284    524/io.lovelace.0   
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       2535370    569/io.web.0        
tcp6       0      0 :::8080                 :::*                    LISTEN      1001       2534659    141/node            
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       2534661    342/io.admin.0      
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           106        2529247    132/avahi-daemon: r 
udp        0      0 0.0.0.0:47975           0.0.0.0:*                           106        2529249    132/avahi-daemon: r 
udp        0      0 0.0.0.0:51408           0.0.0.0:*                           1000       2535202    494/io.openknx.0    
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          2528716    1/init              
udp6       0      0 :::5353                 :::*                                106        2529248    132/avahi-daemon: r 
udp6       0      0 :::43720                :::*                                106        2529250    132/avahi-daemon: r 
udp6       0      0 :::111                  :::*                                0          2528718    1/init              

*** Log File - Last 25 Lines ***

2025-08-13 09:21:13.403  - error: admin.0 (342) Automatic repository update is not allowed more than once an hour
2025-08-13 09:36:25.746  - warn: javascript.0 (398) State "mqtt.0.nuki.35C7D56C.lockAction" not found
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2090:20)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Object.<anonymous> (script.js.common.Zentral.Anwesenheit:29:5)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1452:38)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:645:29)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/build/cjs/lib/adapter/adapter.js:7336:48)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at process.processImmediate (node:internal/timers:483:21)

BigMike71

Moin,
ich habe nen PI5 mit aktueller Installation laufen und alles soweit aktuell in Iobroker
gehalten.
Leider bekomme ich das Node.js nicht mit iob nodesjs-update hochgezogen.
Es kommt keinerlei ausgabe in der ssh shell...
komischerweise zeigt auch iob diag nichts an?!?

Community Forum

NEWS

Wir empfehlen: Node.js 22.x

Support us

591

32.4k

81.4k

1.3m