Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie'
-
@thomas-braun ```
========== Start marking the full check here ===========Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: NUC Icon name: computer-desktop Chassis: desktop 🖥️ Kernel: Linux 6.12.41+deb13-amd64 Architecture: x86-64 Hardware Vendor: Intel corporation Hardware Model: NUC6i3SYB Firmware Version: SYSKLi35.86A.0070.2019.0401.1729 Firmware Date: Mon 2019-04-01 Firmware Age: 6y 4month 2w 2d OS is similar to: model name : Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 17:33:31 up 2:16, 2 users, load average: 1.39, 1.65, 1.36 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sat 2025-08-16 17:33:31 CEST Universal time: Sat 2025-08-16 15:33:31 UTC RTC time: Sat 2025-08-16 15:33:31 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': christian HOME=/home/christian GROUPS=christian adm cdrom floppy sudo audio dip video plugdev users netdev iobroker User that is running 'js-controller': js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 33G 837M 31G 4.3M 2.1G 32G Swap: 1.0G 0B 1.0G Total: 34G 837M 32G Active iob-Instances: 1 31993 M total memory 798 M used memory 290 M active memory 1208 M inactive memory 29686 M free memory 329 M buffer memory 1641 M swap cache 974 M total swap 0 M used swap 974 M free swap *** top - Table Of Processes *** top - 17:33:31 up 2:16, 2 users, load average: 1.28, 1.62, 1.35 Tasks: 184 total, 1 running, 183 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.9 us, 3.8 sy, 0.0 ni, 94.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 31993.3 total, 29686.8 free, 798.2 used, 1970.8 buff/cache MiB Swap: 975.0 total, 975.0 free, 0.0 used. 31195.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * iobroker.service loaded failed failed ioBroker Server Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 16G 0 16G 0% /dev tmpfs tmpfs 3.2G 808K 3.2G 1% /run /dev/sda1 ext4 468G 62G 382G 14% / tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 16G 3.1M 16G 1% /tmp tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 3.2G 8.0K 3.2G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Aug 16 15:17:16 2025] EXT4-fs (sda1): mounted filesystem 96448ee6-f182-4f61-a44e-5eb0f63f92f9 ro with ordered data mode. Quota mode: none. [Sat Aug 16 15:17:17 2025] EXT4-fs (sda1): re-mounted 96448ee6-f182-4f61-a44e-5eb0f63f92f9 r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 2.2G /var/ 1.5G /var/log/journal/08006622a09d4dd5b7dc7c548ff96709 1.5G /var/log/journal 1.5G /var/log 566M /var/cache Archived and active journals take up 1.4G in the file system. /opt/iobroker/backups: 8.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.5G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 308M /opt/iobroker/iobroker-data/backup-objects 287M /opt/iobroker/iobroker-data/files/vis 278M /opt/iobroker/iobroker-data/files/vis/widgets The five largest files in iobroker-data are: 49M /opt/iobroker/iobroker-data/files/0_userdata.0/cam9.mp4 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 40M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/meteoalarm.admin/geocodes.json 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.18.0 /usr/bin/node v22.18.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.33.0 nodejs: Installed: 22.18.0-1nodesource1 Candidate: 22.18.0-1nodesource1 Version table: *** 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is not running on this host. Objects type: jsonl States type: jsonl Hosts: NUC NUC (version: 7.0.7, hostname: NUC , alive, uptime: 8018) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 9.0.11 nodejs modules from github: 8 +-- iobroker.klipper-moonraker@0.1.0 (git+ssh://git@github.com/DrozmotiX/ioBroker.klipper-moonraker.git#0d2851e98f7443e85ebe29d98d8d725640dd0a8a) +-- iobroker.pirate-weather@0.1.4 (git+ssh://git@github.com/ticaki/ioBroker.pirate-weather.git#f70e2e8f1968bfe65afabf792ca73253a19f8321) | +-- samsungtv@0.0.0 (git+https://git@github.com/luca-saggese/samsungtv.git#7fc20107455414e2afb94022682e0787e8635550) +-- iobroker.signifylights@1.0.0 (git+ssh://git@github.com/disaster123/ioBroker.signifylights.git#bb475662d63f1e39993c2b4e9fb395c29dcd1adc) | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) +-- iobroker.tuya@3.17.0 (git+ssh://git@github.com/Apollon77/ioBroker.tuya.git#640df7360a877f37764a31d628e4d6de3ed1f6e3) +-- iobroker.xsense@0.0.12 (git+ssh://git@github.com/arteck/ioBroker.xsense.git#cae2e07ac3d59527f701426739ed0cf14afdd0de) +-- iobroker.yr@5.3.0 (git+ssh://git@github.com/ioBroker/ioBroker.yr.git#dec7b7f69b3968a43a390e2b2a60391c2dca6b23) Adapter State system.adapter.accuweather.0 : accuweather : NUC - enabled system.adapter.admin.0 : admin : NUC - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : NUC - disabled system.adapter.backitup.0 : backitup : NUC - enabled system.adapter.chromecast.0 : chromecast : NUC - enabled system.adapter.daswetter.0 : daswetter : NUC - enabled system.adapter.device-reminder.0 : device-reminder : NUC - enabled system.adapter.device-watcher.0 : device-watcher : NUC - enabled system.adapter.devices.0 : devices : NUC - disabled system.adapter.discovery.0 : discovery : NUC - enabled system.adapter.drops-weather.0 : drops-weather : NUC - disabled system.adapter.dwd.0 : dwd : NUC - enabled system.adapter.echarts.0 : echarts : NUC - enabled system.adapter.email.0 : email : NUC - enabled system.adapter.email.1 : email : NUC - enabled system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: NUC - enabled system.adapter.enigma2.0 : enigma2 : NUC - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : NUC - enabled system.adapter.feiertage.0 : feiertage : NUC - enabled system.adapter.flot.0 : flot : NUC - disabled system.adapter.fullcalendar.0 : fullcalendar : NUC - enabled system.adapter.habpanel.0 : habpanel : NUC - disabled system.adapter.hass.0 : hass : NUC - enabled, port: 8123 system.adapter.heizoel.0 : heizoel : NUC - enabled system.adapter.history.0 : history : NUC - enabled system.adapter.hm-rega.0 : hm-rega : NUC - enabled system.adapter.hm-rpc.0 : hm-rpc : NUC - enabled, port: 3000 system.adapter.hm-rpc.1 : hm-rpc : NUC - enabled, port: 4000 system.adapter.hm-rpc.2 : hm-rpc : NUC - enabled, port: 5000 system.adapter.hm-rpc.3 : hm-rpc : NUC - enabled, port: 5500 system.adapter.homeconnect.0 : homeconnect : NUC - enabled system.adapter.ical.0 : ical : NUC - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: NUC - disabled system.adapter.icons-eclipse-smarthome-classic.0: icons-eclipse-smarthome-classic: NUC - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : NUC - disabled system.adapter.icons-freepic.0 : icons-freepic : NUC - enabled system.adapter.icons-icons8.0 : icons-icons8 : NUC - disabled system.adapter.icons-material-png.0 : icons-material-png : NUC - disabled system.adapter.icons-material-svg.0 : icons-material-svg : NUC - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : NUC - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : NUC - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: NUC - disabled system.adapter.icons-smarthome.0 : icons-smarthome : NUC - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : NUC - disabled system.adapter.iot.0 : iot : NUC - enabled system.adapter.javascript.0 : javascript : NUC - enabled system.adapter.klipper-moonraker.0 : klipper-moonraker : NUC - disabled system.adapter.linux-control.0 : linux-control : NUC - enabled system.adapter.material.0 : material : NUC - disabled system.adapter.matter.0 : matter : NUC - enabled system.adapter.meross.0 : meross : NUC - disabled system.adapter.meteoalarm.0 : meteoalarm : NUC - enabled system.adapter.mobile.0 : mobile : NUC - disabled system.adapter.mqtt.0 : mqtt : NUC - enabled, port: 1883, bind: 0.0.0.0 system.adapter.nina.0 : nina : NUC - enabled system.adapter.node-red.0 : node-red : NUC - disabled, port: 1880, bind: 0.0.0.0 system.adapter.odl.0 : odl : NUC - enabled system.adapter.onkyo.0 : onkyo : NUC - enabled system.adapter.onvif.0 : onvif : NUC - enabled, port: 8000 system.adapter.opendtu.0 : opendtu : NUC - enabled system.adapter.openweathermap.0 : openweathermap : NUC - enabled system.adapter.parser.0 : parser : NUC - enabled system.adapter.ping.0 : ping : NUC - enabled system.adapter.pirate-weather.0 : pirate-weather : NUC - disabled system.adapter.places.0 : places : NUC - enabled system.adapter.pollenflug.0 : pollenflug : NUC - enabled system.adapter.pushover.0 : pushover : NUC - enabled system.adapter.reolink.0 : reolink : NUC - enabled system.adapter.rickshaw.0 : rickshaw : NUC - disabled system.adapter.sainlogic.0 : sainlogic : NUC - enabled, port: 45000, bind: 0.0.0.0 system.adapter.samsung.0 : samsung : NUC - enabled system.adapter.samsung_tizen.0 : samsung_tizen : NUC - enabled, port: 8002 system.adapter.sayit.0 : sayit : NUC - enabled system.adapter.sayit.7 : sayit : NUC - enabled system.adapter.scenes.0 : scenes : NUC - enabled system.adapter.scheduler.0 : scheduler : NUC - enabled system.adapter.signifylights.0 : signifylights : NUC - enabled system.adapter.simple-api.0 : simple-api : NUC - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.socketio.0 : socketio : NUC - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : NUC - enabled, port: 1885, bind: 0.0.0.0 system.adapter.statistics.0 : statistics : NUC - enabled system.adapter.synology.0 : synology : NUC - enabled, port: 5000 system.adapter.tankerkoenig.0 : tankerkoenig : NUC - enabled system.adapter.telegram.0 : telegram : NUC - enabled, port: 8443, bind: 0.0.0.0 system.adapter.telegram.1 : telegram : NUC - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : NUC - enabled system.adapter.text2command.1 : text2command : NUC - enabled system.adapter.time-switch.0 : time-switch : NUC - enabled system.adapter.tr-064.0 : tr-064 : NUC - enabled system.adapter.trashschedule.0 : trashschedule : NUC - enabled system.adapter.tuya.0 : tuya : NUC - enabled system.adapter.vesync.0 : vesync : NUC - enabled system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: NUC - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : NUC - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : NUC - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: NUC - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: NUC - disabled system.adapter.vis-2-widgets-weather-and-heating.0: vis-2-widgets-weather-and-heating: NUC - enabled system.adapter.vis-2.0 : vis-2 : NUC - enabled system.adapter.vis-bars.0 : vis-bars : NUC - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : NUC - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : NUC - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : NUC - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : NUC - enabled system.adapter.vis-history.0 : vis-history : NUC - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : NUC - disabled system.adapter.vis-icontwo.0 : vis-icontwo : NUC - disabled system.adapter.vis-inventwo.0 : vis-inventwo : NUC - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : NUC - disabled system.adapter.vis-justgage.0 : vis-justgage : NUC - disabled system.adapter.vis-keyboard.0 : vis-keyboard : NUC - disabled system.adapter.vis-map.0 : vis-map : NUC - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : NUC - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : NUC - disabled system.adapter.vis-material.0 : vis-material : NUC - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : NUC - disabled system.adapter.vis-metro.0 : vis-metro : NUC - disabled system.adapter.vis-players.0 : vis-players : NUC - disabled system.adapter.vis-plumb.0 : vis-plumb : NUC - enabled system.adapter.vis-rgraph.0 : vis-rgraph : NUC - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : NUC - disabled system.adapter.vis-weather.0 : vis-weather : NUC - disabled system.adapter.vis.0 : vis : NUC - enabled system.adapter.weather-warnings.0 : weather-warnings : NUC - enabled system.adapter.web.0 : web : NUC - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.windows-control.0 : windows-control : NUC - enabled system.adapter.wled.0 : wled : NUC - enabled system.adapter.xsense.0 : xsense : NUC - enabled system.adapter.yamaha.0 : yamaha : NUC - enabled system.adapter.yr.0 : yr : NUC - enabled system.adapter.zendure-solarflow.0 : zendure-solarflow : NUC - enabled system.adapter.zigbee.0 : zigbee : NUC - enabled, port: tcp://192.168.1.49:6638 + instance is alive Enabled adapters with bindings system.adapter.admin.0 : admin : NUC - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.hass.0 : hass : NUC - enabled, port: 8123 system.adapter.hm-rpc.0 : hm-rpc : NUC - enabled, port: 3000 system.adapter.hm-rpc.1 : hm-rpc : NUC - enabled, port: 4000 system.adapter.hm-rpc.2 : hm-rpc : NUC - enabled, port: 5000 system.adapter.hm-rpc.3 : hm-rpc : NUC - enabled, port: 5500 system.adapter.mqtt.0 : mqtt : NUC - enabled, port: 1883, bind: 0.0.0.0 system.adapter.onvif.0 : onvif : NUC - enabled, port: 8000 system.adapter.sainlogic.0 : sainlogic : NUC - enabled, port: 45000, bind: 0.0.0.0 system.adapter.samsung_tizen.0 : samsung_tizen : NUC - enabled, port: 8002 system.adapter.simple-api.0 : simple-api : NUC - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.socketio.0 : socketio : NUC - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : NUC - enabled, port: 1885, bind: 0.0.0.0 system.adapter.synology.0 : synology : NUC - enabled, port: 5000 system.adapter.telegram.0 : telegram : NUC - enabled, port: 8443, bind: 0.0.0.0 system.adapter.telegram.1 : telegram : NUC - enabled, port: 8443, bind: 0.0.0.0 system.adapter.web.0 : web : NUC - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : NUC - enabled, port: tcp://192.168.1.49:6638 ioBroker-Repositories ┌─────────┬───────────────┬─────────────────────────────────────────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼───────────────┼─────────────────────────────────────────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'online' │ 'https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json' │ false │ │ 1 │ 'fast-online' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 2 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 3 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴───────────────┴─────────────────────────────────────────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "accuweather" : 2.1.0 , installed 2.1.0 Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "chromecast" : 4.0.0 , installed 4.0.0 Adapter "daswetter" : 3.2.3 , installed 3.2.3 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "device-watcher": 2.12.6 , installed 2.12.6 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "drops-weather": 1.2.7 , installed 1.2.7 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 2.0.6 , installed 2.0.6 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss-erweitert": 0.7.8, installed 0.7.8 Adapter "enigma2" : 2.2.3 , installed 2.2.3 Adapter "fb-checkpresence": 1.4.0 , installed 1.4.0 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullcalendar" : 2.4.5 , installed 2.4.5 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hass" : 1.4.0 , installed 1.4.0 Adapter "heizoel" : 1.0.3 , installed 1.0.3 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-eclipse-smarthome-classic": 1.0.0, installed 1.0.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-freepic": 1.0.0 , installed 1.0.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-smarthome": 1.0.0 , installed 1.0.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "iot" : 3.6.0 , installed 3.6.0 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "matter" : 0.5.2 , installed 0.5.2 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "meteoalarm" : 4.0.1 , installed 4.0.1 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "nina" : 0.0.26 , installed 0.0.26 Adapter "node-red" : 6.0.7 , installed 6.0.7 Adapter "odl" : 5.0.0 , installed 5.0.0 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "opendtu" : 3.1.0 , installed 3.1.0 Adapter "openweathermap": 1.4.0 , installed 1.4.0 Adapter "parser" : 2.3.1 , installed 2.3.1 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "places" : 1.3.0 , installed 1.3.0 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "reolink" : 1.2.3 , installed 1.2.3 Adapter "rickshaw" : 1.0.0 , installed 1.0.0 Adapter "sainlogic" : 0.12.1 , installed 0.12.1 Adapter "samsung" : 0.6.1 , installed 0.6.1 Adapter "samsung_tizen": 1.1.0 , installed 1.1.0 Adapter "sayit" : 5.0.0 , installed 5.0.0 Adapter "scenes" : 4.0.3 , installed 4.0.3 Adapter "scheduler" : 1.5.0 , installed 1.5.0 Adapter "signifylights": 1.0.0 , installed 1.0.0 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "statistics" : 4.0.0 , installed 4.0.0 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "time-switch" : 2.2.2 , installed 2.2.2 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 4.0.1 , installed 4.0.1 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vesync" : 0.0.9 , installed 0.0.9 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.12.12 , installed 2.12.12 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 2.0.1, installed 2.0.1 Adapter "vis-2-widgets-inventwo": 0.3.5, installed 0.3.5 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-2-widgets-weather-and-heating": 1.1.1, installed 1.1.1 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.18.0 , installed 1.18.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-material" : 0.2.0 , installed 0.2.0 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-material-webfont": 0.0.3, installed 0.0.3 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.12 , installed 2.5.12 Adapter "weather-warnings": 0.7.4 , installed 0.7.4 Adapter "web" : 7.0.9 , installed 7.0.9 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.3 , installed 0.7.3 Adapter "ws" : 3.0.19 , installed 3.0.19 Adapter "yamaha" : 0.5.4 , installed 0.5.4 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zendure-solarflow": 2.0.1, installed 2.0.1 Adapter "zigbee" : 3.0.3 , installed 3.0.3 Objects and States Please stand by - This may take a while Objects: 51148 States: 38799 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://security.debian.org/debian-security trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 854 935/exim4 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5832 766/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 855 935/exim4 tcp6 0 0 :::8555 :::* LISTEN 1000 9071 1751/go2rtc_linux_a tcp6 0 0 :::8554 :::* LISTEN 1000 9067 1751/go2rtc_linux_a tcp6 0 0 :::22 :::* LISTEN 0 5834 766/sshd: /usr/sbin tcp6 0 0 :::1984 :::* LISTEN 1000 10692 1751/go2rtc_linux_a udp 0 0 192.168.1.31:8555 0.0.0.0:* 1000 9075 1751/go2rtc_linux_a udp 0 0 0.0.0.0:68 0.0.0.0:* 0 816 626/dhclient udp6 0 0 2003:c5:8f45:2500::8555 :::* 1000 9077 1751/go2rtc_linux_a udp6 0 0 fd8f:79ab:5076:0:b:8555 :::* 1000 9076 1751/go2rtc_linux_a *** Log File - Last 25 Lines *** 2025-08-16 17:31:16.378 - warn: host.NUC instance system.adapter.statistics.0 terminated due to SIGKILL 2025-08-16 17:31:16.378 - info: host.NUC instance system.adapter.statistics.0 terminated with code null () 2025-08-16 17:31:16.470 - warn: host.NUC instance system.adapter.tankerkoenig.0 terminated due to SIGKILL 2025-08-16 17:31:16.470 - info: host.NUC instance system.adapter.tankerkoenig.0 terminated with code null () 2025-08-16 17:31:16.471 - warn: host.NUC instance system.adapter.text2command.1 terminated due to SIGKILL 2025-08-16 17:31:16.471 - info: host.NUC instance system.adapter.text2command.1 terminated with code null () 2025-08-16 17:31:16.491 - warn: host.NUC instance system.adapter.time-switch.0 terminated due to SIGKILL 2025-08-16 17:31:16.491 - info: host.NUC instance system.adapter.time-switch.0 terminated with code null () 2025-08-16 17:31:16.511 - warn: host.NUC instance system.adapter.vis-2.0 terminated due to SIGKILL 2025-08-16 17:31:16.511 - info: host.NUC instance system.adapter.vis-2.0 terminated with code null () 2025-08-16 17:31:16.548 - warn: host.NUC instance system.adapter.windows-control.0 terminated due to SIGKILL 2025-08-16 17:31:16.548 - info: host.NUC instance system.adapter.windows-control.0 terminated with code null () 2025-08-16 17:31:16.588 - warn: host.NUC instance system.adapter.energiefluss-erweitert.0 terminated due to SIGKILL 2025-08-16 17:31:16.588 - info: host.NUC instance system.adapter.energiefluss-erweitert.0 terminated with code null () 2025-08-16 17:31:16.588 - warn: host.NUC instance system.adapter.vesync.0 terminated due to SIGKILL 2025-08-16 17:31:16.603 - info: host.NUC instance system.adapter.vesync.0 terminated with code null () 2025-08-16 17:31:17.187 - info: host.NUC instance system.adapter.socketio.0 terminated with code 0 (NO_ERROR) 2025-08-16 17:31:17.208 - info: host.NUC instance system.adapter.vis-inventwo.0 terminated while should be started once 2025-08-16 17:31:17.237 - warn: host.NUC instance system.adapter.tuya.0 terminated due to SIGKILL 2025-08-16 17:31:17.238 - info: host.NUC instance system.adapter.tuya.0 terminated with code null () 2025-08-16 17:31:17.258 - info: host.NUC instance system.adapter.history.0 terminated with code 0 (NO_ERROR) 2025-08-16 17:31:17.307 - info: host.NUC instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-08-16 17:31:17.307 - info: host.NUC instance system.adapter.matter.0 terminated with code 0 (NO_ERROR) 2025-08-16 17:31:17.307 - info: host.NUC All instances are stopped. 2025-08-16 17:31:17.375 - info: host.NUC terminated============ Mark until here for C&P =============
iob diag has finished.
christian@NUC:~$
-
Funktioniert also wieder.
-
@thomas-braun Ja, es funktioniert jetzt. Vielen herzlichen Dank für deine Hilfe und Geduld und die super Anleitung für das upgrade.
-
Prinzipiell hat das Upgrade dank @Thomas-Braun's detaillierter Anleitung problemlos funktioniert.
Zuerst vor dem offiziellen Release auf der Testkiste und dann - nachdem das einwandfrei geklappt hat - gestern auf dem Produktivsystem.Allerdings lief heute Morgen das MySQL-Backup nicht mehr durch:
2025-08-16 02:40:25.969 - error: backitup.0 (483) [iobroker/mysql] Error: Command failed: mysqldump -u ioBroker -p**** ioBroker -h 192.168.178.51 -P 3306 > /opt/iobroker/backups/mysql_2025_08_16-02_40_25_backupiobroker.sql 2025-08-16 02:40:25.970 - error: backitup.0 (483) [iobroker/mysql] mysqldump: Got error: 2026: "TLS/SSL error: SSL is required, but the server does not support it" when trying to connect 2025-08-16 02:40:25.970 - error: backitup.0 (483) [iobroker] Error: Command failed: mysqldump -u ioBroker -p**** ioBroker -h 192.168.178.51 -P 3306 > /opt/iobroker/backups/mysql_2025_08_16-02_40_25_backupiobroker.sqlDer DB-Server läuft - genau wie der ioBroker - als LXC unter Proxmox. Das wurde gleichzeitig mit dem Upgrade des ioBroker auf PVE 9.0.5 gehoben.
An den LXC's selbst wurde nix weiter geändert.
Die Historisierung über den SQL-Adapter funktioniert ja auch weiterhin problemlos.@simatec Was muss ich jetzt hier unternehmen? SSL brauche ich innerhalb meines lokalen Netzes nicht. Kann man dem Backup beibringen, die Option
--skip-sslzu verwenden? -
Die Frage ist, warum MySQL bei dir überhaupt SSL verlangt.
Normalerweise muss man das für den Server oder für den User Extra konfigurieren.Schau mal in der Konfiguration einmal hier.
[mysqld]
require_secure_transport = ONOder in der Datenbank selbst
SELECT user, host, ssl_type
FROM mysql.user; -
@dr-bakterius sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
sudo apt-get install iputils-ping --reinstall
Tut mir leid, dass ich erst jetzt antworte.
Ich habe jetzt versucht nochmals mit deinem Code zu machen.
Hat wieder nichts gebracht.edi77@DebianIO:~$ sudo apt-get install iputils-ping --reinstall [sudo] password for edi77: Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: g++-12 libassuan0 libavcodec59 libavdevice59 libavfilter8 libavformat59 libavutil57 libc-ares2 libcares2 libcodec2-1.0 libdav1d6 libdrm-nouveau2 libdrm-radeon1 libepoxy0 libflac12 libgirepository-1.0-1 libglapi-mesa libjsoncpp25 libjxl0.7 libllvm15 libmbedcrypto7 libmfx1 libnl-3-200 libnl-genl-3-200 libnsl-dev libplacebo208 libpostproc56 libpthread-stubs0-dev librav1e0 librhash0 libssh-gcrypt-4 libstdc++-12-dev libsvtav1enc1 libswresample4 libswscale6 libtheora0 libtirpc-dev libvpx7 libx265-199 libxcb-dri2-0 node-busboy node-cjs-module-lexer node-undici node-xtend x11proto-core-dev Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 51.2 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://deb.debian.org/debian trixie/main amd64 iputils-ping amd64 3:20240905-3 [51.2 kB] Fetched 51.2 kB in 0s (612 kB/s) (Reading database ... 48784 files and directories currently installed.) Preparing to unpack .../iputils-ping_3%3a20240905-3_amd64.deb ... Unpacking iputils-ping (3:20240905-3) over (3:20240905-3) ... Setting up iputils-ping (3:20240905-3) ... Processing triggers for man-db (2.13.1-1) ... edi77@DebianIO:~$
-
@oliverio sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Die Frage ist, warum MySQL bei dir überhaupt SSL verlangt.
Falsche Richtung. Nicht der "Server" verlangt SSL, sondern das Backup und mysqldump.
Der Server bietet gar kein SSL an - daran stört sich mysqldump und damit das Backup. Aber erst seit dem Update.
Edit
Diemysqldump.cnfsieht wie folgt aus:[mysqldump] quick quote-names max_allowed_packet = 16M -
@codierknecht sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Die mysqldump.cnf sieht wie folgt aus:
Ich hab's hinbekommen
Die config muss (auf der ioBroker-Seite) so aussehen:
[mysqldump] quick quote-names max_allowed_packet = 16M ssl = 0 -
@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Ähnliches macht man mit veralteten und lokal erzeugten Pakten nach Möglichkeit.
apt list '~o' sudo apt purge '~o' sudo apt --purge autoremove sudo apt autocleanHallo, das Upgrade auf Trixie lief astrein durch.
Wenn ich das apt list '~o' eingebe, kommt bei mir u.a.:grafana-enterprise/now 12.1.1 amd64 [Installiert,lokal]Das möchte ich natürlich behalten.
Kann ich das aus --purge autoremove ausschließen oder
die o.g. Befehle einfach überspringen?
Ist ja nichts, was man unbedingt machen müsste?Grüße
Christoph -
@cbrocker sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Das möchte ich natürlich behalten.
Nein, du möchtest eher auf das Paket
grafanaumsteigen
Und du möchtest schauen, warum das als lokal installiert angezeigt wird.
grafana-Repository nicht aktiv? -
@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
@cbrocker sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Das möchte ich natürlich behalten.
Nein, du möchtest eher auf das Paket
grafanaumsteigen
Und du möchtest schauen, warum das als lokal installiert angezeigt wird.
grafana-Repository nicht aktiv?Grafana aktualisiere ich immer manuell mit
wget https://dl.grafana.com/grafana-enterprise/release/12.1.1/grafana-enterprise_12.1.1_16903967602_linux_amd64.deb sudo dpkg -i grafana-enterprise_12.1.1_16903967602_linux_amd64.debhabe das nicht in der Repository.
Was ist der Unterschied zwischen grafana und grafana-enterprise?
-
@cbrocker sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
habe das nicht in der Repository.
Solltest du aber machen und die Finger von manuellen Installationen lassen.
Das löst dir nämlich auch Abhängigkeiten auf und du wirst auch über neue Releases informiert.grafana-enterprise ist das kommerzielle Angebot für Unternehmen:
Grafana Enterprise:
Commercial offering: Requires a paid license after the trial period. -
@thomas-braun
klar, über Repo ist es auch bequemer.Ich nutze die Enterprise schon seit 2-3 Jahren,
die eingeschränkte Version ist free:The Enterprise Edition is the default and recommended edition. It includes all the features of the OSS Edition, can be used for free and can be upgraded to the full Enterprise feature set, including support for Enterprise plugins.ok, danke für die Hinweise.
Werde ich in die Repo einbauen. -
Danke hat für ein debian 12.11 auf einem Firebat T8 Pro ohne jeglichen Hürden so funktioniert und läuft.
-
Hier auch erledigt.
root@iOBroker:/home/iobroker# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 13 (trixie)
Release: 13
Codename: trixie
root@iOBroker:/home/iobroker# -
@matzebhv said in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
root@
Na lass das mal nicht @Thomas-Braun sehen
-
@lessthanmore sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Na lass das mal nicht @Thomas-Braun sehen
Hab ich schon heute Vormittag gesehen...
-
Ich hab das hier gepostet weil ich vermute das die Meldung jetzt kam nachdem ich das Update vor ein paar Tagen auf "Trixie" bzw das Nodejs update auf die 22.18 gemacht hatte. Falls das damit nix zu tun hat dann einfach löschen oder wenns woanders hion passen würde verschieben
Gerade eben wollte ich per sudo apt update nachschauen ob es neue Updates gibt da kam folgende Meldung
Was wäre denn da jetzt zu tun.
pi@Raspberrypi5:~ $ sudo apt update OK:1 http://deb.debian.org/debian trixie InRelease OK:2 http://deb.debian.org/debian-security trixie-security InRelease OK:3 http://archive.raspberrypi.com/debian trixie InRelease OK:4 http://deb.debian.org/debian trixie-updates InRelease OK:5 https://repos.influxdata.com/debian stable InRelease Holen:6 https://apt.grafana.com stable InRelease [7.661 B] Fehl:6 https://apt.grafana.com stable InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z OK:7 https://deb.nodesource.com/node_22.x nodistro InRelease Alle Pakete sind aktuell. Warnung: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. OpenPGP-Signaturüberprüfung fehlgeschlagen: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Warnung: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Warnung: Fehlschlag beim Holen von https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Warnung: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt.Anbei noch ein aktuelles iob diag
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: Raspberrypi5 Icon name: computer Kernel: Linux 6.12.34+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 01:39:28 up 2 days, 12:08, 1 user, load average: 0.33, 0.22, 0.25 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2025-08-25 01:39:28 CEST Universal time: Sun 2025-08-24 23:39:28 UTC RTC time: Sun 2025-08-24 23:39:28 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/pi GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.4G 1.0G 18M 3.3G 4.1G Swap: 209M 207M 1.9M Total: 8.7G 4.6G 1.0G Active iob-Instances: 33 8063 M total memory 4154 M used memory 3785 M active memory 2753 M inactive memory 965 M free memory 141 M buffer memory 2999 M swap cache 199 M total swap 198 M used swap 1 M free swap *** top - Table Of Processes *** top - 01:39:28 up 2 days, 12:08, 1 user, load average: 0.33, 0.22, 0.25 Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 2.4 sy, 0.0 ni, 97.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.1 total, 962.7 free, 4155.5 used, 3142.9 buff/cache MiB Swap: 200.0 total, 1.8 free, 198.2 used. 3907.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 16M 1.6G 1% /run /dev/sda2 ext4 59G 23G 33G 41% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 4.0G 11M 4.0G 1% /tmp tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service /dev/sda1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 807M 32K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Aug 22 13:31:20 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:A3:25:8A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=beeda195-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Fri Aug 22 13:31:25 2025] EXT4-fs (sda2): mounted filesystem 6835594d-a5f3-459f-a244-318060e7e0ab ro with ordered data mode. Quota mode: none. [Fri Aug 22 13:31:26 2025] EXT4-fs (sda2): re-mounted 6835594d-a5f3-459f-a244-318060e7e0ab r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.1G /var/ 1.3G /var/log/journal/02a43974e4004c17afbe02a71ed8236e 1.3G /var/log/journal 1.3G /var/log 1.3G /var/lib Archived and active journals take up 1.2G in the file system. /opt/iobroker/backups: 3.3G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 501M /opt/iobroker/iobroker-data/ 160M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 72M /opt/iobroker/iobroker-data/node-red 71M /opt/iobroker/iobroker-data/node-red/node_modules The five largest files in iobroker-data are: 40M /opt/iobroker/iobroker-data/objects.jsonl 13M /opt/iobroker/iobroker-data/states.jsonl 8.8M /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CjzUbllv.js 8.6M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 6.2M /opt/iobroker/iobroker-data/jarvis/0/jarvis.0.devices.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.18.0 /usr/bin/node v22.18.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.33.0 nodejs: Installed: 22.18.0-1nodesource1 Candidate: 22.18.0-1nodesource1 Version table: *** 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspberrypi5 Raspberrypi5 (version: 7.0.7, hostname: Raspberrypi5 , alive, uptime: 216475) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 9.0.11 nodejs modules from github: 5 +-- iobroker.influxdb@4.0.3 (git+ssh://git@github.com/ioBroker/ioBroker.influxdb.git#28ac2b78843928094d8a6fea3a43a45cde1cc19d) +-- iobroker.jarvis@3.2.0-rc.17 (git+ssh://git@github.com/Zefau/ioBroker.jarvis.git#65370bd2ad4617722447bcff04ba4dc6429bed9b) +-- iobroker.nspanel-lovelace-ui@0.2.4 (git+ssh://git@github.com/ticaki/ioBroker.nspanel-lovelace-ui.git#dcbe5f9e78b9f2b992650058cd43c45843b6ddff) +-- iobroker.pirate-weather@0.2.0 (git+ssh://git@github.com/ticaki/ioBroker.pirate-weather.git#5afe302853331ec86024d6aa8b3f1aefd85f7c03) +-- iobroker.rpi2@2.4.0 (git+ssh://git@github.com/Grothesk242/ioBroker.rpi2.git#c87e9539d89bac8f4d19b266679bcb78ed554f1d) Adapter State + system.adapter.admin.0 : admin : Raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : Raspberrypi5 - enabled system.adapter.alias-manager.0 : alias-manager : Raspberrypi5 - enabled + system.adapter.alpha-ess.0 : alpha-ess : Raspberrypi5 - enabled + system.adapter.backitup.0 : backitup : Raspberrypi5 - enabled + system.adapter.cloud.0 : cloud : Raspberrypi5 - enabled system.adapter.devices.0 : devices : Raspberrypi5 - enabled + system.adapter.discovery.0 : discovery : Raspberrypi5 - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: Raspberrypi5 - enabled system.adapter.energiefluss-erweitert.1 : energiefluss-erweitert: Raspberrypi5 - disabled + system.adapter.energiefluss-erweitert.2 : energiefluss-erweitert: Raspberrypi5 - enabled system.adapter.energiefluss-erweitert.3 : energiefluss-erweitert: Raspberrypi5 - disabled + system.adapter.fritzdect.0 : fritzdect : Raspberrypi5 - enabled + system.adapter.hm-rega.0 : hm-rega : Raspberrypi5 - enabled + system.adapter.hm-rpc.0 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.homeconnect.0 : homeconnect : Raspberrypi5 - enabled + system.adapter.hue.0 : hue : Raspberrypi5 - enabled, port: 80 system.adapter.ical.0 : ical : Raspberrypi5 - enabled system.adapter.ical.1 : ical : Raspberrypi5 - enabled + system.adapter.influxdb.0 : influxdb : Raspberrypi5 - enabled, port: 8086 system.adapter.iot.0 : iot : Raspberrypi5 - disabled + system.adapter.jarvis.0 : jarvis : Raspberrypi5 - enabled + system.adapter.javascript.0 : javascript : Raspberrypi5 - enabled + system.adapter.matter.0 : matter : Raspberrypi5 - enabled + system.adapter.modbus.0 : modbus : Raspberrypi5 - enabled + system.adapter.mqtt.0 : mqtt : Raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : Raspberrypi5 - enabled + system.adapter.nspanel-lovelace-ui.0 : nspanel-lovelace-ui : Raspberrypi5 - enabled + system.adapter.nuki.0 : nuki : Raspberrypi5 - enabled system.adapter.openweathermap.0 : openweathermap : Raspberrypi5 - enabled + system.adapter.ping.0 : ping : Raspberrypi5 - enabled + system.adapter.pirate-weather.0 : pirate-weather : Raspberrypi5 - enabled + system.adapter.rpi2.0 : rpi2 : Raspberrypi5 - enabled + system.adapter.simple-api.0 : simple-api : Raspberrypi5 - enabled, port: 8087, bind: 192.168.178.82, run as: admin + system.adapter.socketio.0 : socketio : Raspberrypi5 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : Raspberrypi5 - enabled + system.adapter.web.0 : web : Raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspberrypi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.hm-rpc.1 : hm-rpc : Raspberrypi5 - enabled, port: 18701 + system.adapter.hue.0 : hue : Raspberrypi5 - enabled, port: 80 + system.adapter.influxdb.0 : influxdb : Raspberrypi5 - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Raspberrypi5 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Raspberrypi5 - enabled, port: 8087, bind: 192.168.178.82, run as: admin + system.adapter.socketio.0 : socketio : Raspberrypi5 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Raspberrypi5 - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : Raspberrypi5 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : Raspberrypi5 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "alpha-ess" : 3.0.1 , installed 3.0.1 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "energiefluss-erweitert": 0.7.8, installed 0.7.8 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "influxdb" : 4.0.2 , installed 4.0.3 Adapter "iot" : 3.6.0 , installed 3.6.0 Adapter "jarvis" : 3.2.0-rc.5, installed 3.2.0-rc.17 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "matter" : 0.5.2 , installed 0.5.2 Adapter "modbus" : 6.4.0 , installed 6.4.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "net-tools" : 1.2.0 , installed 1.2.0 Adapter "nuki" : 2.0.0 , installed 2.0.0 Adapter "openweathermap": 1.4.0 , installed 1.4.0 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "web" : 7.0.9 , installed 7.0.9 Adapter "ws" : 3.0.19 , installed 3.0.19 Objects and States Please stand by - This may take a while Objects: 14508 States: 14163 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian-security trixie-security InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Get:5 https://apt.grafana.com stable InRelease [7661 B] Hit:6 https://repos.influxdata.com/debian stable InRelease Err:5 https://apt.grafana.com stable InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://apt.grafana.com stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.82:18701 0.0.0.0:* LISTEN 1001 10438 1488/io.hm-rpc.0 tcp 0 0 192.168.178.82:18702 0.0.0.0:* LISTEN 1001 12321 1505/io.hm-rpc.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 106 7481 861/mosquitto tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 226331 16034/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8253 834/sshd: /usr/sbin tcp 0 0 192.168.178.82:8087 0.0.0.0:* LISTEN 1001 15114 2308/io.simple-api. tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 7690 1187/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 7697 1187/iobroker.js-co tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 7638 1145/exim4 tcp6 0 0 ::1:25 :::* LISTEN 0 7639 1145/exim4 tcp6 0 0 :::1883 :::* LISTEN 106 7482 861/mosquitto tcp6 0 0 :::8400 :::* LISTEN 1001 3524004 268297/io.jarvis.0 tcp6 0 0 :::22 :::* LISTEN 0 8255 834/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 10004 1229/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 16426 2401/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 15866 2367/io.socketio.0 tcp6 0 0 :::8086 :::* LISTEN 999 8478 853/influxd tcp6 0 0 :::3000 :::* LISTEN 107 9965 1186/grafana udp 0 0 0.0.0.0:48124 0.0.0.0:* 1001 15796 2192/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 14081 2192/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 14073 2192/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 1797 648/avahi-daemon: r udp 0 0 0.0.0.0:5541 0.0.0.0:* 1001 14090 2192/io.matter.0 udp 0 0 0.0.0.0:58952 0.0.0.0:* 104 1799 648/avahi-daemon: r udp6 0 0 :::48124 :::* 1001 15795 2192/io.matter.0 udp6 0 0 fe80::f05b:9255:16f:546 :::* 0 9894 735/NetworkManager udp6 0 0 fe80::38be:beb2:fe6:546 :::* 0 8329 735/NetworkManager udp6 0 0 :::5353 :::* 1001 14084 2192/io.matter.0 udp6 0 0 :::5353 :::* 1001 14076 2192/io.matter.0 udp6 0 0 :::5353 :::* 104 1798 648/avahi-daemon: r udp6 0 0 :::5541 :::* 1001 14089 2192/io.matter.0 udp6 0 0 :::34804 :::* 104 1800 648/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-08-25 01:39:40.006 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:39:40.009 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:40.014 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText] 2025-08-25 01:39:40.016 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText] 2025-08-25 01:39:45.004 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:45.009 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:39:50.003 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:39:50.006 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:50.058 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText] 2025-08-25 01:39:50.100 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText] 2025-08-25 01:39:53.009 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:39:53.052 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:39:53.053 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:39:55.003 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:39:55.047 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:40:00.004 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.010 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.010 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.010 - info: mqtt.0 (1612) send2Server mqtt.0.SmartHome.NSPanel_C60BC4.cmnd.CustomSend[SmartHome/NSPanel_C60BC4/cmnd/CustomSend] 2025-08-25 01:40:00.019 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText] 2025-08-25 01:40:00.026 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:40:00.031 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-186.cmnd.DisplayText[Displays/Tasmota-ssd1309-186/cmnd/DisplayText] 2025-08-25 01:40:00.035 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-4x20-59.cmnd.DisplayText[Displays/Tasmota-4x20-59/cmnd/DisplayText] 2025-08-25 01:40:05.005 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssh1106-21.cmnd.DisplayText[Displays/Tasmota-ssh1106-21/cmnd/DisplayText] 2025-08-25 01:40:05.010 - info: mqtt.0 (1612) send2Server mqtt.0.Displays.Tasmota-ssd1309-176.cmnd.DisplayText[Displays/Tasmota-ssd1309-176/cmnd/DisplayText]============ Mark until here for C&P =============
iob diag has finished.
Ich hab jetzt mal Chat GPT gefragt und hier wurde mir folgendes angeboten was ich auch durchgeführt habe. ich hatte mir im Vorfeld eine Sicherungskopie meiner Festplatte gemacht so das ich jederzeit auf das vorran gegangene System wieder zurück kann wenn was schief läuft. Scheint aber zu funktionieren. Fehler ist zumindest weg.
1. Alte Datei/Keyreferenzen löschen Falls du noch eine alte Repository-Datei hast, die auf den abgelaufenen Key verweist, am besten löschen: sudo rm /etc/apt/sources.list.d/grafana.list 2. Neuen Key herunterladen und sicher ablegen sudo mkdir -p /usr/share/keyrings sudo wget -q -O /usr/share/keyrings/grafana.gpg https://apt.grafana.com/gpg.key 3. Repository mit neuem Key einrichten echo "deb [signed-by=/usr/share/keyrings/grafana.gpg] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list 4. Update durchführen sudo apt updateIch hoffe das das so in Ordnung ist.
Nach einem weiteren iob diag hatte ich wieder eine Meldung
*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * iobroker.service loaded failed failed ioBroker Server Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed.Die aber dann durch einen iob fix und einen reboot wieder verschwunden ist.
-
@teletapi sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Warnung: Fehlschlag beim Holen von https://apt.grafana.com/dists/stable/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Signing key on B53AE77BADB630A683046005963FA27710458545 is bad: The primary key is not live because: Expired on 2025-08-23T16:33:45Z
Der Schlüssel muss erneuert werden, deiner ist am 23. August abgelaufen. Ich mache das immer danach:
https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind
Hier werden andere Verzeichnisse als bei SchrottJiPiehTieh verwendet. Kann man sich drüber streiten, was richtiger/besser ist, die aktuelle Vorgabe seitens Debian ist aber
/etc/apt/keyrings/ -
@thomas-braun kann ich das so lassen oder sollte ich das ändern damit das für die Zukunft evtl. besser ist.?
