NEWS
Fritzbox mit Grafana visualisieren [Version 2022]
-
@damrak2022 du meinst https://forum.iobroker.net/post/793421
Ich bin nur am Handy, musst du selbst abtippen 😉 -
@crunchip Das steht bei Chrome wenn ich versuche die Seite zu öffnen.
@damrak2022 ??
Das ist der Link zum 12. Beitrag in diesem Thread, dann scroll doch einfach hochumgestiegen von Proxmox auf Unraid
-
@damrak2022 ??
Das ist der Link zum 12. Beitrag in diesem Thread, dann scroll doch einfach hoch@crunchip Ich habe es heute morgen irgendwie hinbekommen das Grafana wieder erreichbar ist. Dazu musste ich eine andere Installationsanleitung verwenden. Jetzt habe ich Grafana 7.4
Also dachte ich mir ich wage mich nochmal an die Installation
Nur bei dem Punkt wo ich den Befehl./fritzinfluxdb.pyeingebe komme ich nicht weiter. Da bekomme ich nämlich eine fehlende Directory angezeigt:
pi@homebridge:~ $ ./fritzinfluxdb.py -bash: ./fritzinfluxdb.py: No such file or directoryIch vermute das meine Einstellungen in der .ini nicht korrekt sind:
[influxdb] host = 127.0.0.1 port = 8086 username = bla password = blub database = db ssl = false verify_ssl = true measurement_name = fritzbox [fritzbox] host = 192.168.178.1 username = Damrak2XXXX password = huu84m-XXXXXXXX # change to 49443 if you use ssl port = 49000 timeout = 5 ssl = false # interval to request data in seconds #interval = 10Und bevor ich mir nun wieder alles komplett zerschieße, habe ich mir gedacht es ist besser zu warten, bis jemand mit Ahnung mir sagt was ich machen müsste damit es klappt
Mit besten Grüßen
Andy -
@crunchip Ich habe es heute morgen irgendwie hinbekommen das Grafana wieder erreichbar ist. Dazu musste ich eine andere Installationsanleitung verwenden. Jetzt habe ich Grafana 7.4
Also dachte ich mir ich wage mich nochmal an die Installation
Nur bei dem Punkt wo ich den Befehl./fritzinfluxdb.pyeingebe komme ich nicht weiter. Da bekomme ich nämlich eine fehlende Directory angezeigt:
pi@homebridge:~ $ ./fritzinfluxdb.py -bash: ./fritzinfluxdb.py: No such file or directoryIch vermute das meine Einstellungen in der .ini nicht korrekt sind:
[influxdb] host = 127.0.0.1 port = 8086 username = bla password = blub database = db ssl = false verify_ssl = true measurement_name = fritzbox [fritzbox] host = 192.168.178.1 username = Damrak2XXXX password = huu84m-XXXXXXXX # change to 49443 if you use ssl port = 49000 timeout = 5 ssl = false # interval to request data in seconds #interval = 10Und bevor ich mir nun wieder alles komplett zerschieße, habe ich mir gedacht es ist besser zu warten, bis jemand mit Ahnung mir sagt was ich machen müsste damit es klappt
@damrak2022 Nein, die py-Datei darf nicht ausgeführt werden oder sie existiert nicht.
mach mal ls und schau, ob die Datei da ist, wenn ja, dann ausführbar machen, z.B.
chmod 777 ./fritzinfluxdb.pyoder Du startest sie mit bash:
bash ./fritzinfluxdb.pySofern in der ersten Zeile der richtige interpreter steht, sollte das dann laufen.
Wenn sie nicht da ist, bist Du ggf. im falschen Verzeichnis?!?
-
@crunchip Ich habe es heute morgen irgendwie hinbekommen das Grafana wieder erreichbar ist. Dazu musste ich eine andere Installationsanleitung verwenden. Jetzt habe ich Grafana 7.4
Also dachte ich mir ich wage mich nochmal an die Installation
Nur bei dem Punkt wo ich den Befehl./fritzinfluxdb.pyeingebe komme ich nicht weiter. Da bekomme ich nämlich eine fehlende Directory angezeigt:
pi@homebridge:~ $ ./fritzinfluxdb.py -bash: ./fritzinfluxdb.py: No such file or directoryIch vermute das meine Einstellungen in der .ini nicht korrekt sind:
[influxdb] host = 127.0.0.1 port = 8086 username = bla password = blub database = db ssl = false verify_ssl = true measurement_name = fritzbox [fritzbox] host = 192.168.178.1 username = Damrak2XXXX password = huu84m-XXXXXXXX # change to 49443 if you use ssl port = 49000 timeout = 5 ssl = false # interval to request data in seconds #interval = 10Und bevor ich mir nun wieder alles komplett zerschieße, habe ich mir gedacht es ist besser zu warten, bis jemand mit Ahnung mir sagt was ich machen müsste damit es klappt
@damrak2022 denke du bist im falschen Verzeichnis
wenn ich es richtig gesehen habe, müsste es in/opt/fritzinfluxdb/sein -
@damrak2022 Nein, die py-Datei darf nicht ausgeführt werden oder sie existiert nicht.
mach mal ls und schau, ob die Datei da ist, wenn ja, dann ausführbar machen, z.B.
chmod 777 ./fritzinfluxdb.pyoder Du startest sie mit bash:
bash ./fritzinfluxdb.pySofern in der ersten Zeile der richtige interpreter steht, sollte das dann laufen.
Wenn sie nicht da ist, bist Du ggf. im falschen Verzeichnis?!?
@jr Bei ls bekomme ich das:
pi@homebridge:/opt/fritzinfluxdb $ ls docker-compose.yml fritzinfluxdb.ini.save.7 Dockerfile fritzinfluxdb.ini.save.8 fritzinfluxdb.ini fritzinfluxdb.ini.save.9 fritzinfluxdb.ini-sample fritzinfluxdb.py fritzinfluxdb.ini.save fritzinfluxdb.service fritzinfluxdb.ini.save.1 grafana_dashboard_fritzbox.json fritzinfluxdb.ini.save.2 grafana_dashboard.jpg fritzinfluxdb.ini.save.3 LICENSE.txt fritzinfluxdb.ini.save.4 README.md fritzinfluxdb.ini.save.5 requirements.txt fritzinfluxdb.ini.save.6Und das kommt hier:
pi@homebridge:/opt/fritzinfluxdb $ bash ./fritzinfluxdb.py ./fritzinfluxdb.py: line 3: self_description: command not found ./fritzinfluxdb.py: line 9: from: command not found ./fritzinfluxdb.py: line 10: import: command not found ./fritzinfluxdb.py: line 11: import: command not found ./fritzinfluxdb.py: line 12: import: command not found ./fritzinfluxdb.py: line 13: import: command not found ./fritzinfluxdb.py: line 14: import: command not found ./fritzinfluxdb.py: line 15: from: command not found ./fritzinfluxdb.py: line 18: import: command not found ./fritzinfluxdb.py: line 19: import: command not found ./fritzinfluxdb.py: line 22: __version__: command not found ./fritzinfluxdb.py: line 23: __version_date__: command not found ./fritzinfluxdb.py: line 24: __description__: command not found ./fritzinfluxdb.py: line 25: __license__: command not found ./fritzinfluxdb.py: line 29: running: command not found ./fritzinfluxdb.py: line 30: syntax error near unexpected token `(' ./fritzinfluxdb.py: line 30: `default_config = os.path.join(os.path.dirname(__file__), 'fritzinfluxdb.ini')'Kannst Du mir hier bitte weiterhelfen, damit ich das zum laufen bekomme.
Mit besten Grüßen
Andy -
@jr Bei ls bekomme ich das:
pi@homebridge:/opt/fritzinfluxdb $ ls docker-compose.yml fritzinfluxdb.ini.save.7 Dockerfile fritzinfluxdb.ini.save.8 fritzinfluxdb.ini fritzinfluxdb.ini.save.9 fritzinfluxdb.ini-sample fritzinfluxdb.py fritzinfluxdb.ini.save fritzinfluxdb.service fritzinfluxdb.ini.save.1 grafana_dashboard_fritzbox.json fritzinfluxdb.ini.save.2 grafana_dashboard.jpg fritzinfluxdb.ini.save.3 LICENSE.txt fritzinfluxdb.ini.save.4 README.md fritzinfluxdb.ini.save.5 requirements.txt fritzinfluxdb.ini.save.6Und das kommt hier:
pi@homebridge:/opt/fritzinfluxdb $ bash ./fritzinfluxdb.py ./fritzinfluxdb.py: line 3: self_description: command not found ./fritzinfluxdb.py: line 9: from: command not found ./fritzinfluxdb.py: line 10: import: command not found ./fritzinfluxdb.py: line 11: import: command not found ./fritzinfluxdb.py: line 12: import: command not found ./fritzinfluxdb.py: line 13: import: command not found ./fritzinfluxdb.py: line 14: import: command not found ./fritzinfluxdb.py: line 15: from: command not found ./fritzinfluxdb.py: line 18: import: command not found ./fritzinfluxdb.py: line 19: import: command not found ./fritzinfluxdb.py: line 22: __version__: command not found ./fritzinfluxdb.py: line 23: __version_date__: command not found ./fritzinfluxdb.py: line 24: __description__: command not found ./fritzinfluxdb.py: line 25: __license__: command not found ./fritzinfluxdb.py: line 29: running: command not found ./fritzinfluxdb.py: line 30: syntax error near unexpected token `(' ./fritzinfluxdb.py: line 30: `default_config = os.path.join(os.path.dirname(__file__), 'fritzinfluxdb.ini')'Kannst Du mir hier bitte weiterhelfen, damit ich das zum laufen bekomme.
Poste das Skript mal. Dann könnte man mal schauen was da für commands nicht gefunden werden.
Vermutlich fehlen da python-Pakete. -
Poste das Skript mal. Dann könnte man mal schauen was da für commands nicht gefunden werden.
Vermutlich fehlen da python-Pakete.@thomas-braun Sorry, wie mache ich das?
Ich bin nach der Anleitung vorgegangen:
https://blog.gwarg.de/2022/01/22/fritzbox-mit-grafana-visualisieren-version-2022/Mit besten Grüßen
Andy -
@thomas-braun Sorry, wie mache ich das?
Ich bin nach der Anleitung vorgegangen:
https://blog.gwarg.de/2022/01/22/fritzbox-mit-grafana-visualisieren-version-2022/cat fritzinfluxdb.py -
@thomas-braun Sorry, wie mache ich das?
Ich bin nach der Anleitung vorgegangen:
https://blog.gwarg.de/2022/01/22/fritzbox-mit-grafana-visualisieren-version-2022/ -
@thomas-braun sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
python --version
pi@homebridge:/opt/fritzinfluxdb $ python --version Python 2.7.18Mit besten Grüßen
Andy -
@thomas-braun sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
python --version
pi@homebridge:/opt/fritzinfluxdb $ python --version Python 2.7.18Hatte ich mir fast gedacht.
sudo apt update sudo apt install python-is-python3 python --versionVermutlich funktioniert es danach.
-
Hatte ich mir fast gedacht.
sudo apt update sudo apt install python-is-python3 python --versionVermutlich funktioniert es danach.
@thomas-braun sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
python --version
pi@homebridge:~ $ sudo apt update Get:1 http://archive.raspberrypi.org/debian bullseye InRelease [23.7 kB] Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/enterprise/deb stable InRelease Hit:5 https://packages.grafana.com/oss/deb stable InRelease Hit:6 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:7 https://archive.raspbian.org/raspbian buster InRelease Get:8 http://archive.raspberrypi.org/debian bullseye/main armhf Packages [279 kB] Hit:9 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Fetched 302 kB in 7s (42.6 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 5 packages can be upgraded. Run 'apt list --upgradable' to see them. W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 pi@homebridge:~ $ sudo apt install python-is-python3 Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal Use 'sudo apt autoremove' to remove them. The following packages will be REMOVED: python-dev-is-python2 python-is-python2 The following NEW packages will be installed: python-is-python3 0 upgraded, 1 newly installed, 2 to remove and 5 not upgraded. Need to get 2,800 B of archives. After this operation, 15.4 kB disk space will be freed. Do you want to continue? [Y/n] y Get:1 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian bullseye/main armhf python-is-python3 all 3.9.2-1 [2,800 B] Fetched 2,800 B in 1s (5,450 B/s) (Reading database ... 68564 files and directories currently installed.) Removing python-dev-is-python2 (2.7.18-9) ... Removing python-is-python2 (2.7.18-9) ... Selecting previously unselected package python-is-python3. (Reading database ... 68552 files and directories currently installed.) Preparing to unpack .../python-is-python3_3.9.2-1_all.deb ... Unpacking python-is-python3 (3.9.2-1) ... Setting up python-is-python3 (3.9.2-1) ... Processing triggers for man-db (2.9.4-2) ... pi@homebridge:~ $ python --version Python 3.9.2 pi@homebridge:~ $ ./fritzinfluxdb.py -bash: ./fritzinfluxdb.py: No such file or directory pi@homebridge:~ $ cd /opt/influxdb -bash: cd: /opt/influxdb: No such file or directory pi@homebridge:~ $ cd /opt/fritzinfluxdb pi@homebridge:/opt/fritzinfluxdb $ ./fritzinfluxdb.py Traceback (most recent call last): File "/opt/fritzinfluxdb/./fritzinfluxdb.py", line 18, in <module> import fritzconnection ModuleNotFoundError: No module named 'fritzconnection' pi@homebridge:/opt/fritzinfluxdb $Das Update hat funktionier, aber der Befehl laut Anleitung nicht (Zeile 79)
Mit besten Grüßen
Andy -
@thomas-braun sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
python --version
pi@homebridge:~ $ sudo apt update Get:1 http://archive.raspberrypi.org/debian bullseye InRelease [23.7 kB] Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/enterprise/deb stable InRelease Hit:5 https://packages.grafana.com/oss/deb stable InRelease Hit:6 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:7 https://archive.raspbian.org/raspbian buster InRelease Get:8 http://archive.raspberrypi.org/debian bullseye/main armhf Packages [279 kB] Hit:9 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Fetched 302 kB in 7s (42.6 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 5 packages can be upgraded. Run 'apt list --upgradable' to see them. W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 pi@homebridge:~ $ sudo apt install python-is-python3 Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal Use 'sudo apt autoremove' to remove them. The following packages will be REMOVED: python-dev-is-python2 python-is-python2 The following NEW packages will be installed: python-is-python3 0 upgraded, 1 newly installed, 2 to remove and 5 not upgraded. Need to get 2,800 B of archives. After this operation, 15.4 kB disk space will be freed. Do you want to continue? [Y/n] y Get:1 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian bullseye/main armhf python-is-python3 all 3.9.2-1 [2,800 B] Fetched 2,800 B in 1s (5,450 B/s) (Reading database ... 68564 files and directories currently installed.) Removing python-dev-is-python2 (2.7.18-9) ... Removing python-is-python2 (2.7.18-9) ... Selecting previously unselected package python-is-python3. (Reading database ... 68552 files and directories currently installed.) Preparing to unpack .../python-is-python3_3.9.2-1_all.deb ... Unpacking python-is-python3 (3.9.2-1) ... Setting up python-is-python3 (3.9.2-1) ... Processing triggers for man-db (2.9.4-2) ... pi@homebridge:~ $ python --version Python 3.9.2 pi@homebridge:~ $ ./fritzinfluxdb.py -bash: ./fritzinfluxdb.py: No such file or directory pi@homebridge:~ $ cd /opt/influxdb -bash: cd: /opt/influxdb: No such file or directory pi@homebridge:~ $ cd /opt/fritzinfluxdb pi@homebridge:/opt/fritzinfluxdb $ ./fritzinfluxdb.py Traceback (most recent call last): File "/opt/fritzinfluxdb/./fritzinfluxdb.py", line 18, in <module> import fritzconnection ModuleNotFoundError: No module named 'fritzconnection' pi@homebridge:/opt/fritzinfluxdb $Das Update hat funktionier, aber der Befehl laut Anleitung nicht (Zeile 79)
@damrak2022 sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
/etc/apt/sources.list.d/grafana.list
Räum die mal auf.
Da sind Doubletten drin. -
@damrak2022 sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
/etc/apt/sources.list.d/grafana.list
Räum die mal auf.
Da sind Doubletten drin.@thomas-braun Sorry Thomas, da sind meine Kenntnisse noch zu gering. We räume ich das auf?
Mit besten Grüßen
Andy -
@thomas-braun Sorry Thomas, da sind meine Kenntnisse noch zu gering. We räume ich das auf?
sudo nano /etc/apt/sources.list.d/grafana.listJede Quelle darf da nur einfach drin stehen.
-
@thomas-braun Sorry Thomas, da sind meine Kenntnisse noch zu gering. We räume ich das auf?
-
@thomas-braun sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
python --version
pi@homebridge:~ $ sudo apt update Get:1 http://archive.raspberrypi.org/debian bullseye InRelease [23.7 kB] Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/enterprise/deb stable InRelease Hit:5 https://packages.grafana.com/oss/deb stable InRelease Hit:6 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:7 https://archive.raspbian.org/raspbian buster InRelease Get:8 http://archive.raspberrypi.org/debian bullseye/main armhf Packages [279 kB] Hit:9 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Fetched 302 kB in 7s (42.6 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 5 packages can be upgraded. Run 'apt list --upgradable' to see them. W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:3 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:4 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:2 and /etc/apt/sources.list.d/grafana.list:5 pi@homebridge:~ $ sudo apt install python-is-python3 Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal Use 'sudo apt autoremove' to remove them. The following packages will be REMOVED: python-dev-is-python2 python-is-python2 The following NEW packages will be installed: python-is-python3 0 upgraded, 1 newly installed, 2 to remove and 5 not upgraded. Need to get 2,800 B of archives. After this operation, 15.4 kB disk space will be freed. Do you want to continue? [Y/n] y Get:1 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian bullseye/main armhf python-is-python3 all 3.9.2-1 [2,800 B] Fetched 2,800 B in 1s (5,450 B/s) (Reading database ... 68564 files and directories currently installed.) Removing python-dev-is-python2 (2.7.18-9) ... Removing python-is-python2 (2.7.18-9) ... Selecting previously unselected package python-is-python3. (Reading database ... 68552 files and directories currently installed.) Preparing to unpack .../python-is-python3_3.9.2-1_all.deb ... Unpacking python-is-python3 (3.9.2-1) ... Setting up python-is-python3 (3.9.2-1) ... Processing triggers for man-db (2.9.4-2) ... pi@homebridge:~ $ python --version Python 3.9.2 pi@homebridge:~ $ ./fritzinfluxdb.py -bash: ./fritzinfluxdb.py: No such file or directory pi@homebridge:~ $ cd /opt/influxdb -bash: cd: /opt/influxdb: No such file or directory pi@homebridge:~ $ cd /opt/fritzinfluxdb pi@homebridge:/opt/fritzinfluxdb $ ./fritzinfluxdb.py Traceback (most recent call last): File "/opt/fritzinfluxdb/./fritzinfluxdb.py", line 18, in <module> import fritzconnection ModuleNotFoundError: No module named 'fritzconnection' pi@homebridge:/opt/fritzinfluxdb $Das Update hat funktionier, aber der Befehl laut Anleitung nicht (Zeile 79)
@damrak2022 sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
pi@homebridge:/opt/fritzinfluxdb $ ./fritzinfluxdb.py Traceback (most recent call last): File "/opt/fritzinfluxdb/./fritzinfluxdb.py", line 18, in <module> import fritzconnection ModuleNotFoundError: No module named 'fritzconnection' pi@homebridge:/opt/fritzinfluxdb $
also bist du doch da im richtigen Verzeichnis,
pi@homebridge:/opt/fritzinfluxdb $ ./fritzinfluxdb.py
so wie ich das lese, fehlt dir fritzconnectionpip install fritzconnectionumgestiegen von Proxmox auf Unraid
-
@thomas-braun sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
sudo apt full-upgrade
pi@homebridge:~ $ sudo nano /etc/apt/sources.list.d/grafana.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://packages.grafana.com/oss/deb stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 5 packages can be upgraded. Run 'apt list --upgradable' to see them. pi@homebridge:~ $ sudo apt autoremove Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal 0 upgraded, 0 newly installed, 12 to remove and 5 not upgraded. After this operation, 27.2 MB disk space will be freed. Do you want to continue? [Y/n] y (Reading database ... 68557 files and directories currently installed.) Removing python2-dev (2.7.18-3) ... Removing libpython2-dev:armhf (2.7.18-3) ... Removing python2 (2.7.18-3) ... Removing libpython2-stdlib:armhf (2.7.18-3) ... Removing python2.7-dev (2.7.18-8) ... Removing libpython2.7-dev:armhf (2.7.18-8) ... Removing libpython2.7:armhf (2.7.18-8) ... Removing python2.7 (2.7.18-8) ... Removing libpython2.7-stdlib:armhf (2.7.18-8) ... Removing python2-minimal (2.7.18-3) ... Removing python2.7-minimal (2.7.18-8) ... Unlinking and removing bytecode for runtime python2.7 Removing libpython2.7-minimal:armhf (2.7.18-8) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for mailcap (3.69) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u2) ... pi@homebridge:~ $ sudo apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: libraspberrypi-bin libraspberrypi-dev libraspberrypi-doc libraspberrypi0 pi-bluetooth 5 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 501 kB of archives. After this operation, 5,120 B of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-dev armhf 1:2+git20220324~090146+c4fd1b8-1 [177 kB] Get:2 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-bin armhf 1:2+git20220324~090146+c4fd1b8-1 [149 kB] Get:3 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi0 armhf 1:2+git20220324~090146+c4fd1b8-1 [167 kB] Get:4 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-doc all 1:2+git20220324~090146+c4fd1b8-1 [1,908 B] Get:5 http://archive.raspberrypi.org/debian bullseye/main armhf pi-bluetooth all 0.1.19 [5,764 B] Fetched 501 kB in 0s (1,731 kB/s) Reading changelogs... Done (Reading database ... 67657 files and directories currently installed.) Preparing to unpack .../libraspberrypi-dev_1%3a2+git20220324~090146+c4fd1b8-1_armhf.deb ... Unpacking libraspberrypi-dev (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../libraspberrypi-bin_1%3a2+git20220324~090146+c4fd1b8-1_armhf.deb ... Unpacking libraspberrypi-bin (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../libraspberrypi0_1%3a2+git20220324~090146+c4fd1b8-1_armhf.deb ... Unpacking libraspberrypi0:armhf (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../libraspberrypi-doc_1%3a2+git20220324~090146+c4fd1b8-1_all.deb ... Unpacking libraspberrypi-doc (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../pi-bluetooth_0.1.19_all.deb ... Unpacking pi-bluetooth (0.1.19) over (0.1.18) ... Setting up pi-bluetooth (0.1.19) ... Setting up libraspberrypi0:armhf (1:2+git20220324~090146+c4fd1b8-1) ... Setting up libraspberrypi-bin (1:2+git20220324~090146+c4fd1b8-1) ... Setting up libraspberrypi-dev (1:2+git20220324~090146+c4fd1b8-1) ... Setting up libraspberrypi-doc (1:2+git20220324~090146+c4fd1b8-1) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u2) ... Processing triggers for man-db (2.9.4-2) ... pi@homebridge:~ $pi@homebridge:/opt/fritzinfluxdb $ ./fritzinfluxdb.py Traceback (most recent call last): File "/opt/fritzinfluxdb/./fritzinfluxdb.py", line 18, in <module> import fritzconnection ModuleNotFoundError: No module named 'fritzconnection' pi@homebridge:/opt/fritzinfluxdb $Mit besten Grüßen
Andy -
@thomas-braun sagte in Fritzbox mit Grafana visualisieren [Version 2022]:
sudo apt full-upgrade
pi@homebridge:~ $ sudo nano /etc/apt/sources.list.d/grafana.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://packages.grafana.com/oss/deb stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 5 packages can be upgraded. Run 'apt list --upgradable' to see them. pi@homebridge:~ $ sudo apt autoremove Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be REMOVED: libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal 0 upgraded, 0 newly installed, 12 to remove and 5 not upgraded. After this operation, 27.2 MB disk space will be freed. Do you want to continue? [Y/n] y (Reading database ... 68557 files and directories currently installed.) Removing python2-dev (2.7.18-3) ... Removing libpython2-dev:armhf (2.7.18-3) ... Removing python2 (2.7.18-3) ... Removing libpython2-stdlib:armhf (2.7.18-3) ... Removing python2.7-dev (2.7.18-8) ... Removing libpython2.7-dev:armhf (2.7.18-8) ... Removing libpython2.7:armhf (2.7.18-8) ... Removing python2.7 (2.7.18-8) ... Removing libpython2.7-stdlib:armhf (2.7.18-8) ... Removing python2-minimal (2.7.18-3) ... Removing python2.7-minimal (2.7.18-8) ... Unlinking and removing bytecode for runtime python2.7 Removing libpython2.7-minimal:armhf (2.7.18-8) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for mailcap (3.69) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u2) ... pi@homebridge:~ $ sudo apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: libraspberrypi-bin libraspberrypi-dev libraspberrypi-doc libraspberrypi0 pi-bluetooth 5 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 501 kB of archives. After this operation, 5,120 B of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-dev armhf 1:2+git20220324~090146+c4fd1b8-1 [177 kB] Get:2 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-bin armhf 1:2+git20220324~090146+c4fd1b8-1 [149 kB] Get:3 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi0 armhf 1:2+git20220324~090146+c4fd1b8-1 [167 kB] Get:4 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-doc all 1:2+git20220324~090146+c4fd1b8-1 [1,908 B] Get:5 http://archive.raspberrypi.org/debian bullseye/main armhf pi-bluetooth all 0.1.19 [5,764 B] Fetched 501 kB in 0s (1,731 kB/s) Reading changelogs... Done (Reading database ... 67657 files and directories currently installed.) Preparing to unpack .../libraspberrypi-dev_1%3a2+git20220324~090146+c4fd1b8-1_armhf.deb ... Unpacking libraspberrypi-dev (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../libraspberrypi-bin_1%3a2+git20220324~090146+c4fd1b8-1_armhf.deb ... Unpacking libraspberrypi-bin (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../libraspberrypi0_1%3a2+git20220324~090146+c4fd1b8-1_armhf.deb ... Unpacking libraspberrypi0:armhf (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../libraspberrypi-doc_1%3a2+git20220324~090146+c4fd1b8-1_all.deb ... Unpacking libraspberrypi-doc (1:2+git20220324~090146+c4fd1b8-1) over (1:2+git20211125~155417+14b90ff-3) ... Preparing to unpack .../pi-bluetooth_0.1.19_all.deb ... Unpacking pi-bluetooth (0.1.19) over (0.1.18) ... Setting up pi-bluetooth (0.1.19) ... Setting up libraspberrypi0:armhf (1:2+git20220324~090146+c4fd1b8-1) ... Setting up libraspberrypi-bin (1:2+git20220324~090146+c4fd1b8-1) ... Setting up libraspberrypi-dev (1:2+git20220324~090146+c4fd1b8-1) ... Setting up libraspberrypi-doc (1:2+git20220324~090146+c4fd1b8-1) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u2) ... Processing triggers for man-db (2.9.4-2) ... pi@homebridge:~ $pi@homebridge:/opt/fritzinfluxdb $ ./fritzinfluxdb.py Traceback (most recent call last): File "/opt/fritzinfluxdb/./fritzinfluxdb.py", line 18, in <module> import fritzconnection ModuleNotFoundError: No module named 'fritzconnection' pi@homebridge:/opt/fritzinfluxdb $Da fehlt wie @crunchip (und die verlinkte Anleitung) schreibt
pip install fritzconnection
Support us
604
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge