iob diag - Skript

Shadowhunter23

Habs x mal erneuert:

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
awk: run time error: regular expression compile failed (missing operand)
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.64:20108
        FILENAME="-" FNR=1 NR=1
awk: run time error: regular expression compile failed (missing operand)
+ system.adapter.zigbee.1                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.69:20108
        FILENAME="-" FNR=1 NR=1
awk: run time error: regular expression compile failed (missing operand)
+ system.adapter.zigbee.2                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.79:20108
        FILENAME="-" FNR=1 NR=1
awk: run time error: regular expression compile failed (missing operand)
+ system.adapter.zigbee.3                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.63:20108
        FILENAME="-" FNR=1 NR=1
awk: run time error: regular expression compile failed (missing operand)
+ system.adapter.zigbee.4                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.0.99:20108
        FILENAME="-" FNR=1 NR=1

*** NodeJS-Installation ***

Shadowhunter23

Jetzt sieht es besser aus:

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108            -                                   tcp
zigbee.1        tcp://192.168.0.69:20108            -                                   tcp
zigbee.2        tcp://192.168.0.79:20108            -                                   tcp
zigbee.3        tcp://192.168.0.63:20108            -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***

Thomas Braun

@Shadowhunter23

Ah, das sieht wie gewollt aus.
Kannst du es jetzt nochmal laden?
Ich hoffe das war es dann.

Bei mir schaut die Ausgabe nun so aus:

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status              
--------        ----------------                    ----------------------------        ------              
zigbee.0        ...00_23_93_2C_A8-if00-port0        ...00_23_93_2C_A8-if00-port0        ✓ Matching

Shadowhunter23

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108            -                                   tcp
zigbee.1        tcp://192.168.0.69:20108            -                                   tcp
zigbee.2        tcp://192.168.0.79:20108            -                                   tcp
zigbee.3        tcp://192.168.0.63:20108            -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***

Thomas Braun

@Shadowhunter23

Super, so sollte es aussehen. Und die Werte sind auch richtig zugeordnet?
Also zigbee.0 ist mit tcp://192.168.0.64:20108 konfiguriert?

Shadowhunter23

@Thomas-Braun sagte in iob diag - Skript:

Super, so sollte es aussehen. Und die Werte sind auch richtig zugeordnet?

Ja bei allen passt es.

Thomas Braun

@Shadowhunter23

Ganz herzlichen Dank für dein geduldiges Testen!
Ich hab jetzt nur noch was kleines optisches angepasst.
Die Trennlinien sind jetzt länger... :-)

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status              
--------        ----------------------------        ----------------------------        ------              
zigbee.0        ...00_23_93_2C_A8-if00-port0        ...00_23_93_2C_A8-if00-port0        ✓ Matching

Jetzt wäre es toll, wenn noch jemand mit mehreren USB-Sticks oder einem Mix aus USB-Stick und tcp-Verbindung mal schauen könnte wie es dort aussieht.

TT-Tom

@Thomas-Braun
von wo muss es gestartet werden? aus dem iobroker Verzeichnis oder aus meinem user Verzeichnis??

beim User habe ich ein paar Fehlermeldungen, arbeite da mit einem LXC Container.

Script v.2026-03-08

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: iobtest
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
          Kernel: Linux 6.17.13-1-pve
    Architecture: x86-64
OS is similar to: 
model name	: Intel(R) N100
CPU threads     : 4
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64bit

Systemuptime and Load:
 09:21:36 up 5 days, 17:02,  1 user,  load average: 0.69, 0.68, 0.52

*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** TIME AND TIMEZONES ***
               Local time: Mon 2026-03-09 09:21:36 CET
           Universal time: Mon 2026-03-09 08:21:36 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
tom
HOME=/home/tom
GROUPS=tom sudo users iobroker

User that is running 'js-controller':
iobroker
[sudo] password for tom: 
HOME=/home/iobroker
SUDO_HOME=/home/tom
GROUPS=iobroker tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server:		Unknown
Display-Manager: 	Not found
Desktop:		
Session:		tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.4G        2.7G        5.5G        3.0M        145M        5.6G
Swap:           536M        234M        302M
Total:          8.9G        3.0G        5.8G

Active iob-Instances: 	16

         8000 M total memory
         2612 M used memory
         1649 M active memory
         1011 M inactive memory
         5250 M free memory
            0 M buffer memory
          139 M swap cache
          512 M total swap
          223 M used swap
          288 M free swap

*** top - Table Of Processes  ***
top - 09:21:47 up 5 days, 17:02,  1 user,  load average: 0.90, 0.73, 0.54
Tasks:  41 total,   1 running,  40 sleeping,   0 stopped,   0 zombie
%Cpu(s):  3.6 us,  1.8 sy,  0.0 ni, 78.6 id, 16.1 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   8000.0 total,   5250.4 free,   2613.2 used,    139.2 buff/cache     
MiB Swap:    512.0 total,    288.4 free,    223.6 used.   5386.8 avail Mem 

*** FAILED SERVICES ***
  UNIT                    LOAD   ACTIVE SUB    DESCRIPTION                     
* run-rpc_pipefs.mount    loaded failed failed RPC Pipe File System
* sys-kernel-config.mount loaded failed failed Kernel Configuration File System

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

2 loaded units listed.

*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem               Type      Size  Used Avail Use% Mounted on
DATEN1/subvol-101-disk-1 zfs        64G   14G   51G  22% /
none                     tmpfs     492K  4.0K  488K   1% /dev
udev                     devtmpfs   16G     0   16G   0% /dev/tty
tmpfs                    tmpfs      16G     0   16G   0% /dev/shm
tmpfs                    tmpfs     6.3G  132K  6.3G   1% /run
tmpfs                    tmpfs      16G  2.8M   16G   1% /tmp
tmpfs                    tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs                    tmpfs     3.2G  8.0K  3.2G   1% /run/user/1000

Messages concerning filesystems in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE                   FSTYPE OPTIONS
/      DATEN1/subvol-101-disk-1 zfs    rw,relatime,xattr,posixacl,casesensitive

Files in neuralgic directories:
/var:
319M	/var/
181M	/var/cache
178M	/var/cache/apt
125M	/var/cache/apt/archives
70M	/var/lib
Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 4.2M in the file system.

/opt/iobroker/backups:
139M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
245M	/opt/iobroker/iobroker-data/
121M	/opt/iobroker/iobroker-data/backup-objects
113M	/opt/iobroker/iobroker-data/files
24M	/opt/iobroker/iobroker-data/files/mytime.admin
23M	/opt/iobroker/iobroker-data/files/mytime.admin/custom/assets

The five largest files in iobroker-data are:
15M	/opt/iobroker/iobroker-data/files/mytime.admin/custom/assets/index-B_3WOu59.js.map
7.8M	/opt/iobroker/iobroker-data/objects.jsonl
4.4M	/opt/iobroker/iobroker-data/backup-objects/2026-03-09_08-19_objects.jsonl.gz
4.4M	/opt/iobroker/iobroker-data/backup-objects/2026-03-09_06-19_objects.jsonl.gz
4.4M	/opt/iobroker/iobroker-data/backup-objects/2026-03-09_04-19_objects.jsonl.gz

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

*** NodeJS-Installation ***

/usr/bin/nodejs		v22.22.0
/usr/bin/node		v22.22.0
/usr/bin/npm		10.9.4
/usr/bin/npx		10.9.4

✓ Node.js installation is correct

nodejs:
  Installed: 22.22.0-1nodesource1
  Candidate: 22.22.0-1nodesource1
  Version table:
 *** 22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:
node:fs:2437
    return binding.writeFileUtf8(
                   ^

Error: EACCES: permission denied, open '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag'
    at Object.writeFileSync (node:fs:2437:20)
    at ClientRequest.<anonymous> (/home/iobroker/node_modules/is-my-node-vulnerable/is-vulnerable.js:82:12)
    at Object.onceWrapper (node:events:634:26)
    at ClientRequest.emit (node:events:519:28)
    at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:772:27)
    at HTTPParser.parserOnHeadersComplete (node:_http_common:122:17)
    at TLSSocket.socketOnData (node:_http_client:614:22)
    at TLSSocket.emit (node:events:519:28)
    at addChunk (node:internal/streams/readable:561:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:512:3) {
  errno: -13,
  code: 'EACCES',
  syscall: 'open',
  path: '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag'
}

Node.js v22.22.0


*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobtest             iobtest (version: 7.1.0, hostname: iobtest       , alive, uptime: 493355)

Core adapters versions
js-controller: 	7.1.0
admin: 		7.8.2
javascript: 	9.0.18

nodejs modules from github: 	3
+-- iobroker.fahrplan@1.4.1 (git+ssh://git@github.com/tt-tom17/ioBroker.fahrplan.git#a25514b1774a271768b58081fe4031bf3eb9ebca)
+-- iobroker.nspanel-lovelace-ui@0.13.4 (git+ssh://git@github.com/ticaki/ioBroker.nspanel-lovelace-ui.git#b8e5efbbe1973a36a4dfdb0f0e3e63c435630803)
+-- iobroker.public-transport@0.0.5 (git+ssh://git@github.com/tt-tom17/ioBroker.public-transport.git#335d0dd3595a1dd8da7aa69116f84923b001ff5b)


Adapter State
+ system.adapter.admin.0                  : admin                 : iobtest                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : iobtest                                  - disabled
+ system.adapter.backitup.0               : backitup              : iobtest                                  -  enabled
  system.adapter.cloudless-homeconnect.0  : cloudless-homeconnect : iobtest                                  - disabled
  system.adapter.devices.0                : devices               : iobtest                                  - disabled
+ system.adapter.fahrplan.0               : fahrplan              : iobtest                                  -  enabled
  system.adapter.hmip.0                   : hmip                  : iobtest                                  - disabled
  system.adapter.ical.0                   : ical                  : iobtest                                  -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobtest                                  -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : iobtest                                  -  enabled
+ system.adapter.javascript.1             : javascript            : iobtest                                  -  enabled
+ system.adapter.mqtt-client.0            : mqtt-client           : iobtest                                  -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobtest                                  -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.1                   : mqtt                  : iobtest                                  - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.mytime.0                 : mytime                : iobtest                                  - disabled
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : iobtest                                  -  enabled
+ system.adapter.nspanel-lovelace-ui.0    : nspanel-lovelace-ui   : iobtest                                  -  enabled
  system.adapter.opendtu.0                : opendtu               : iobtest                                  - disabled
  system.adapter.openweathermap.0         : openweathermap        : iobtest                                  -  enabled
+ system.adapter.pirate-weather.0         : pirate-weather        : iobtest                                  -  enabled
  system.adapter.proxmox.0                : proxmox               : iobtest                                  - disabled
+ system.adapter.public-transport.0       : public-transport      : iobtest                                  -  enabled
+ system.adapter.simple-api.0             : simple-api            : iobtest                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.socketio.0               : socketio              : iobtest                                  - disabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sql.0                    : sql                   : iobtest                                  -  enabled
  system.adapter.trashschedule.0          : trashschedule         : iobtest                                  - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobtest                                  -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobtest                                  -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : iobtest                                  -  enabled
  system.adapter.vis.0                    : vis                   : iobtest                                  -  enabled
+ system.adapter.web.0                    : web                   : iobtest                                  -  enabled, port: 8082, bind: 192.168.178.53, run as: admin
  system.adapter.ws.0                     : ws                    : iobtest                                  - disabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.yahka.0                  : yahka                 : iobtest                                  - disabled
  system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : iobtest                                  - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobtest                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : iobtest                                  -  enabled, port: 8086
+ system.adapter.mqtt-client.0            : mqtt-client           : iobtest                                  -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobtest                                  -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobtest                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : iobtest                                  -  enabled, port: 8082, bind: 192.168.178.53, run as: admin


ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): beta
Upgrade policy: none


Installed ioBroker-Adapters
Used repository: beta
Adapter    "admin"        : 7.8.3    , installed 7.8.2  [Updatable]
Adapter    "alias-manager": 2.1.0    , installed 2.1.0
Adapter    "backitup"     : 3.3.14   , installed 3.3.14
Adapter    "cloudless-homeconnect": 1.6.3, installed 1.6.3
Adapter    "devices"      : 1.2.14   , installed 1.2.14
Adapter    "fahrplan"     : 1.4.1    , installed 1.4.1
Adapter    "hmip"         : 1.27.0   , installed 1.27.0
Adapter    "ical"         : 1.19.7   , installed 1.19.7
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 9.0.18   , installed 9.0.18
Controller "js-controller": 7.1.0    , installed 7.1.0
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "mqtt-client"  : 3.0.0    , installed 3.0.0
Adapter    "mytime"       : 2.3.2    , installed 2.3.2
Adapter    "netatmo-crawler": 1.1.0  , installed 1.1.0
Adapter    "nspanel-lovelace-ui": 0.13.4, installed 0.13.4
Adapter    "opendtu"      : 3.1.0    , installed 3.1.0
Adapter    "openweathermap": 1.4.0   , installed 1.4.0
Adapter    "pirate-weather": 0.8.0   , installed 0.8.0
Adapter    "proxmox"      : 2.4.10   , installed 2.4.10
Adapter    "simple-api"   : 3.0.7    , installed 3.0.7
Adapter    "socketio"     : 7.0.8    , installed 7.0.8
Adapter    "sql"          : 3.0.1    , installed 3.0.1
Adapter    "trashschedule": 5.2.1    , installed 5.2.1
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-hqwidgets": 1.6.0    , installed 1.6.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "web"          : 8.0.0    , installed 8.0.0
Adapter    "ws"           : 4.0.0    , installed 4.0.0
Adapter    "yahka"        : 1.1.6    , installed 1.1.6
Adapter    "zigbee2mqtt"  : 3.0.21   , installed 3.0.21


Objects and States
Please stand by - This may take a while

Objects: 	10075
States: 	8039

*** OS-Repositories and Updates ***

Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease                                                                   
Hit:3 http://deb.debian.org/debian trixie-updates InRelease                                                           
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease                                                         
Hit:5 https://packagecloud.io/ookla/speedtest-cli/debian trixie InRelease                       
Reading package lists... Done

Pending systemupdates: 1

*** Listening Ports ***
Netid State  Recv-Q Send-Q  Local Address:Port     Peer Address:Port Process                                                   
udp   UNCONN 0      0             0.0.0.0:sunrpc        0.0.0.0:*     users:(("rpcbind",pid=140,fd=5),("systemd",pid=1,fd=35)) 
udp   UNCONN 0      0                [::]:sunrpc           [::]:*     users:(("rpcbind",pid=140,fd=7),("systemd",pid=1,fd=37)) 
tcp   LISTEN 0      511    192.168.178.53:8082          0.0.0.0:*     users:(("io.web.0",pid=637,fd=35))                       
tcp   LISTEN 0      100         127.0.0.1:smtp          0.0.0.0:*     users:(("master",pid=294,fd=13))                         
tcp   LISTEN 0      4096          0.0.0.0:sunrpc        0.0.0.0:*     users:(("rpcbind",pid=140,fd=4),("systemd",pid=1,fd=34)) 
tcp   LISTEN 0      511         127.0.0.1:9001          0.0.0.0:*     users:(("iobroker.js-con",pid=143,fd=23))                
tcp   LISTEN 0      511         127.0.0.1:9000          0.0.0.0:*     users:(("iobroker.js-con",pid=143,fd=29))                
tcp   LISTEN 0      511                 *:tproxy              *:*     users:(("io.admin.0",pid=882,fd=39))                     
tcp   LISTEN 0      511                 *:8087                *:*     users:(("io.simple-api.0",pid=684,fd=35))                
tcp   LISTEN 0      100             [::1]:smtp             [::]:*     users:(("master",pid=294,fd=14))                         
tcp   LISTEN 0      4096                *:ssh                 *:*     users:(("sshd",pid=165,fd=3),("systemd",pid=1,fd=61))    
tcp   LISTEN 0      4096             [::]:sunrpc           [::]:*     users:(("rpcbind",pid=140,fd=6),("systemd",pid=1,fd=36)) 


*** Log File - Last 25 Lines ***
2026-03-09 09:01:43.488  - info: host.iobtest instance system.adapter.nspanel-lovelace-ui.0 in version "0.13.4" (non-npm: ticaki/ioBroker.nspanel-lovelace-ui#b8e5efbbe1973a36a4dfdb0f0e3e63c435630803) started with pid 25570
2026-03-09 09:01:44.377  - info: nspanel-lovelace-ui.0 (25570) starting. Version 0.13.4 (non-npm: ticaki/ioBroker.nspanel-lovelace-ui#b8e5efbbe1973a36a4dfdb0f0e3e63c435630803) in /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui, node: v22.22.0, js-controller: 7.1.0
2026-03-09 09:01:44.429  - info: nspanel-lovelace-ui.0 (25570) Configured panels: name#topic -> [Buero#SmartHome/NSPanel_1], [DEV-Panel#NSPanel_DEV]
2026-03-09 09:01:44.430  - info: nspanel-lovelace-ui.0 (25570) Found 2 script configs for topics: SmartHome/NSPanel_1, NSPanel_DEV
2026-03-09 09:01:44.430  - info: nspanel-lovelace-ui.0 (25570) Detailed configuration checks are suppressed here. Full validation output is only shown when the configuration script is sent to the adapter.
2026-03-09 09:01:46.351  - info: nspanel-lovelace-ui.0 (25570) [Buero] Setting panel to offline until first message!
2026-03-09 09:01:46.392  - info: nspanel-lovelace-ui.0 (25570) [DEV-Panel] Setting panel to offline until first message!
2026-03-09 09:01:53.211  - info: nspanel-lovelace-ui.0 (25570) [controller] 2 Panels initialized
2026-03-09 09:01:54.380  - info: nspanel-lovelace-ui.0 (25570) [Buero] is online!
2026-03-09 09:01:54.803  - info: nspanel-lovelace-ui.0 (25570) [Buero] Panel startup finished!
2026-03-09 09:05:01.421  - info: nspanel-lovelace-ui.0 (25570) [Buero] Panel startup finished!
2026-03-09 09:05:20.941  - info: fahrplan.0 (607) Updated 3 routes, 3 enabled and 0 disabled
2026-03-09 09:05:21.194  - info: fahrplan.0 (607) Updated 1 departure timetables, 1 enabled and 0 disabled
2026-03-09 09:10:26.298  - info: fahrplan.0 (607) Updated 3 routes, 3 enabled and 0 disabled
2026-03-09 09:10:26.578  - info: fahrplan.0 (607) Updated 1 departure timetables, 1 enabled and 0 disabled
2026-03-09 09:11:37.614  - warn: admin.0 (882) nspanel-lovelace-ui has an invalid jsonConfig: [{"instancePath":"/items/pagePower/items/pagePowerdata/items/6","schemaPath":"#/additionalProperties","keyword":"additionalProperties","params":{"additionalProperty":"attr"},"message":"must NOT have additional properties"},{"instancePath":"/items/pagePower/items/pagePowerdata/items/6","schemaPath":"#/items/allOf/18/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"/items/pagePower/items/pagePowerdata","schemaPath":"#/patternProperties/%5E.%2B/allOf/57/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"/items/pagePower","schemaPath":"#/properties/items/patternProperties/%5E.%2B/allOf/11/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"","schemaPath":"#/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"}]
2026-03-09 09:15:05.013  - info: host.iobtest instance system.adapter.netatmo-crawler.0 in version "1.1.0" started with pid 25592
2026-03-09 09:15:05.673  - info: netatmo-crawler.0 (25592) starting. Version 1.1.0 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v22.22.0, js-controller: 7.1.0
2026-03-09 09:15:05.690  - info: netatmo-crawler.0 (25592) Getting data for stationid:70:ee:50:35:dc:b6
2026-03-09 09:15:06.537  - info: netatmo-crawler.0 (25592) Terminated (NO_ERROR): Everything done. Going to terminate till next schedule
2026-03-09 09:15:07.047  - info: host.iobtest instance system.adapter.netatmo-crawler.0 having pid 25592 terminated with code 0 (NO_ERROR)
2026-03-09 09:15:30.461  - info: fahrplan.0 (607) Updated 3 routes, 3 enabled and 0 disabled
2026-03-09 09:15:30.698  - info: fahrplan.0 (607) Updated 1 departure timetables, 1 enabled and 0 disabled
2026-03-09 09:20:34.384  - info: fahrplan.0 (607) Updated 3 routes, 3 enabled and 0 disabled
2026-03-09 09:20:34.716  - info: fahrplan.0 (607) Updated 1 departure timetables, 1 enabled and 0 disabled

zum Vergleich die normal iob diag Ausgabe

Script v.2026-01-31

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: iobtest
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
          Kernel: Linux 6.17.13-1-pve
    Architecture: x86-64
OS is similar to: 

model name	: Intel(R) N100
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 09:51:54 up 5 days, 17:32,  1 user,  load average: 0.27, 0.63, 0.57
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** TIME AND TIMEZONES ***
               Local time: Mon 2026-03-09 09:51:54 CET
           Universal time: Mon 2026-03-09 08:51:54 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
tom
HOME=/home/tom
GROUPS=tom sudo users iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/tom
GROUPS=iobroker tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server: 	false
Unit display-manager.service could not be found.
Display-Manager: 	
Desktop: 		
Session: 		tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.4G        2.0G        6.2G        3.1M        194M        6.4G
Swap:           536M        339K        536M
Total:          8.9G        2.0G        6.8G

Active iob-Instances: 	16

         8000 M total memory
         1865 M used memory
         1904 M active memory
           43 M inactive memory
         5952 M free memory
            0 M buffer memory
          185 M swap cache
          512 M total swap
            0 M used swap
          511 M free swap

*** top - Table Of Processes  ***
top - 09:51:54 up 5 days, 17:32,  1 user,  load average: 0.27, 0.63, 0.57
Tasks:  45 total,   1 running,  44 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   8000.0 total,   5951.3 free,   1866.2 used,    185.3 buff/cache     
MiB Swap:    512.0 total,    511.7 free,      0.3 used.   6133.8 avail Mem 

*** FAILED SERVICES ***

  UNIT                    LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount    loaded failed failed RPC Pipe File System
* sys-kernel-config.mount loaded failed failed Kernel Configuration File System

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem               Type      Size  Used Avail Use% Mounted on
DATEN1/subvol-101-disk-1 zfs        64G   14G   51G  22% /
none                     tmpfs     492K  4.0K  488K   1% /dev
udev                     devtmpfs   16G     0   16G   0% /dev/tty
tmpfs                    tmpfs      16G     0   16G   0% /dev/shm
tmpfs                    tmpfs     6.3G  132K  6.3G   1% /run
tmpfs                    tmpfs      16G  2.8M   16G   1% /tmp
tmpfs                    tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs                    tmpfs     3.2G  8.0K  3.2G   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE                   FSTYPE OPTIONS
/      DATEN1/subvol-101-disk-1 zfs    rw,relatime,xattr,posixacl,casesensitive

Files in neuralgic directories:

/var:
319M	/var/
181M	/var/cache
178M	/var/cache/apt
125M	/var/cache/apt/archives
70M	/var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 4.3M in the file system.

/opt/iobroker/backups:
139M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
242M	/opt/iobroker/iobroker-data/
121M	/opt/iobroker/iobroker-data/backup-objects
113M	/opt/iobroker/iobroker-data/files
24M	/opt/iobroker/iobroker-data/files/mytime.admin
23M	/opt/iobroker/iobroker-data/files/mytime.admin/custom/assets

The five largest files in iobroker-data are:
15M	/opt/iobroker/iobroker-data/files/mytime.admin/custom/assets/index-B_3WOu59.js.map
7.6M	/opt/iobroker/iobroker-data/objects.jsonl
4.4M	/opt/iobroker/iobroker-data/backup-objects/2026-03-09_08-19_objects.jsonl.gz
4.4M	/opt/iobroker/iobroker-data/backup-objects/2026-03-09_06-19_objects.jsonl.gz
4.4M	/opt/iobroker/iobroker-data/backup-objects/2026-03-09_04-19_objects.jsonl.gz

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs 	v22.22.0
/usr/bin/node 		v22.22.0
/usr/bin/npm 		10.9.4
/usr/bin/npx 		10.9.4

✓ Node.js installation is correct

nodejs:
  Installed: 22.22.0-1nodesource1
  Candidate: 22.22.1-1nodesource1
  Version table:
     22.22.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
 *** 22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobtest             iobtest (version: 7.1.0, hostname: iobtest       , alive, uptime: 316)

Core adapters versions
js-controller: 	7.1.0
admin: 		7.8.2
javascript: 	9.0.18

nodejs modules from github: 	3
+-- iobroker.fahrplan@1.4.1 (git+ssh://git@github.com/tt-tom17/ioBroker.fahrplan.git#a25514b1774a271768b58081fe4031bf3eb9ebca)
+-- iobroker.nspanel-lovelace-ui@0.13.4 (git+ssh://git@github.com/ticaki/ioBroker.nspanel-lovelace-ui.git#b8e5efbbe1973a36a4dfdb0f0e3e63c435630803)
+-- iobroker.public-transport@0.0.5 (git+ssh://git@github.com/tt-tom17/ioBroker.public-transport.git#335d0dd3595a1dd8da7aa69116f84923b001ff5b)

Adapter State
+ system.adapter.admin.0                  : admin                 : iobtest                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : iobtest                                  - disabled
+ system.adapter.backitup.0               : backitup              : iobtest                                  -  enabled
  system.adapter.cloudless-homeconnect.0  : cloudless-homeconnect : iobtest                                  - disabled
  system.adapter.devices.0                : devices               : iobtest                                  - disabled
+ system.adapter.fahrplan.0               : fahrplan              : iobtest                                  -  enabled
  system.adapter.hmip.0                   : hmip                  : iobtest                                  - disabled
  system.adapter.ical.0                   : ical                  : iobtest                                  -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobtest                                  -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : iobtest                                  -  enabled
+ system.adapter.javascript.1             : javascript            : iobtest                                  -  enabled
+ system.adapter.mqtt-client.0            : mqtt-client           : iobtest                                  -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobtest                                  -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.1                   : mqtt                  : iobtest                                  - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.mytime.0                 : mytime                : iobtest                                  - disabled
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : iobtest                                  -  enabled
+ system.adapter.nspanel-lovelace-ui.0    : nspanel-lovelace-ui   : iobtest                                  -  enabled
  system.adapter.opendtu.0                : opendtu               : iobtest                                  - disabled
  system.adapter.openweathermap.0         : openweathermap        : iobtest                                  -  enabled
+ system.adapter.pirate-weather.0         : pirate-weather        : iobtest                                  -  enabled
  system.adapter.proxmox.0                : proxmox               : iobtest                                  - disabled
+ system.adapter.public-transport.0       : public-transport      : iobtest                                  -  enabled
+ system.adapter.simple-api.0             : simple-api            : iobtest                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.socketio.0               : socketio              : iobtest                                  - disabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sql.0                    : sql                   : iobtest                                  -  enabled
  system.adapter.trashschedule.0          : trashschedule         : iobtest                                  - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobtest                                  -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobtest                                  -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : iobtest                                  -  enabled
  system.adapter.vis.0                    : vis                   : iobtest                                  -  enabled
+ system.adapter.web.0                    : web                   : iobtest                                  -  enabled, port: 8082, bind: 192.168.178.53, run as: admin
  system.adapter.ws.0                     : ws                    : iobtest                                  - disabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.yahka.0                  : yahka                 : iobtest                                  - disabled
  system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : iobtest                                  - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobtest                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : iobtest                                  -  enabled, port: 8086
+ system.adapter.mqtt-client.0            : mqtt-client           : iobtest                                  -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobtest                                  -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.public-transport.0       : public-transport      : iobtest                                  -  enabled
+ system.adapter.simple-api.0             : simple-api            : iobtest                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : iobtest                                  -  enabled, port: 8082, bind: 192.168.178.53, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): beta
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: beta
Adapter    "admin"        : 7.8.3    , installed 7.8.2  [Updatable]
Adapter    "alias-manager": 2.1.0    , installed 2.1.0
Adapter    "backitup"     : 3.3.14   , installed 3.3.14
Adapter    "cloudless-homeconnect": 1.6.3, installed 1.6.3
Adapter    "devices"      : 1.2.14   , installed 1.2.14
Adapter    "fahrplan"     : 1.4.1    , installed 1.4.1
Adapter    "hmip"         : 1.27.0   , installed 1.27.0
Adapter    "ical"         : 1.19.7   , installed 1.19.7
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 9.0.18   , installed 9.0.18
Controller "js-controller": 7.1.0    , installed 7.1.0
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "mqtt-client"  : 3.0.0    , installed 3.0.0
Adapter    "mytime"       : 2.3.2    , installed 2.3.2
Adapter    "netatmo-crawler": 1.1.0  , installed 1.1.0
Adapter    "nspanel-lovelace-ui": 0.13.4, installed 0.13.4
Adapter    "opendtu"      : 3.1.0    , installed 3.1.0
Adapter    "openweathermap": 1.4.0   , installed 1.4.0
Adapter    "pirate-weather": 0.8.0   , installed 0.8.0
Adapter    "proxmox"      : 2.4.10   , installed 2.4.10
Adapter    "simple-api"   : 3.0.7    , installed 3.0.7
Adapter    "socketio"     : 7.0.8    , installed 7.0.8
Adapter    "sql"          : 3.0.1    , installed 3.0.1
Adapter    "trashschedule": 5.2.1    , installed 5.2.1
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-hqwidgets": 1.6.0    , installed 1.6.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "web"          : 8.0.0    , installed 8.0.0
Adapter    "ws"           : 4.0.0    , installed 4.0.0
Adapter    "yahka"        : 1.1.6    , installed 1.1.6
Adapter    "zigbee2mqtt"  : 3.0.21   , installed 3.0.21

Objects and States
Please stand by - This may take a while
Objects: 	10019
States: 	7993

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Hit:5 https://packagecloud.io/ookla/speedtest-cli/debian trixie InRelease
Reading package lists...
Pending systemupdates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 192.168.178.53:8082     0.0.0.0:*               LISTEN      1001       31394874   27969/io.web.0      
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          30032      294/master          
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          17403      1/init              
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       31384629   27130/iobroker.js-c 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       31384634   27130/iobroker.js-c 
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       31384845   27149/io.admin.0    
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       31395098   28008/io.simple-api 
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          30033      294/master          
tcp6       0      0 :::22                   :::*                    LISTEN      0          21994      1/init              
tcp6       0      0 :::111                  :::*                    LISTEN      0          17405      1/init              
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          17404      1/init              
udp6       0      0 :::111                  :::*                                0          17406      1/init              

*** Log File - Last 25 Lines ***

2026-03-09 09:47:37.959  - error: javascript.0 (27223) script.js.common.Speedtest: Speedtest konnte nicht ausgeführt werden! Error: Command failed: /usr/bin/speedtest -f json --accept-license --accept-gdpr

2026-03-09 09:47:39.217  - info: vis.0 (28024) Terminated (NO_ERROR): Without reason
2026-03-09 09:47:39.744  - info: host.iobtest instance system.adapter.vis.0 terminated while should be started once
2026-03-09 09:47:41.039  - info: host.iobtest instance system.adapter.nspanel-lovelace-ui.0 in version "0.13.4" (non-npm: ticaki/ioBroker.nspanel-lovelace-ui#b8e5efbbe1973a36a4dfdb0f0e3e63c435630803) started with pid 28082
2026-03-09 09:47:41.820  - info: nspanel-lovelace-ui.0 (28082) starting. Version 0.13.4 (non-npm: ticaki/ioBroker.nspanel-lovelace-ui#b8e5efbbe1973a36a4dfdb0f0e3e63c435630803) in /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui, node: v22.22.0, js-controller: 7.1.0
2026-03-09 09:47:41.872  - info: nspanel-lovelace-ui.0 (28082) Configured panels: name#topic -> [Buero#SmartHome/NSPanel_1], [DEV-Panel#NSPanel_DEV]
2026-03-09 09:47:41.872  - info: nspanel-lovelace-ui.0 (28082) Found 2 script configs for topics: SmartHome/NSPanel_1, NSPanel_DEV
2026-03-09 09:47:41.872  - info: nspanel-lovelace-ui.0 (28082) Detailed configuration checks are suppressed here. Full validation output is only shown when the configuration script is sent to the adapter.
2026-03-09 09:47:43.781  - info: nspanel-lovelace-ui.0 (28082) [Buero] Setting panel to offline until first message!
2026-03-09 09:47:43.823  - info: nspanel-lovelace-ui.0 (28082) [DEV-Panel] Setting panel to offline until first message!
2026-03-09 09:47:44.836  - info: host.iobtest instance system.adapter.public-transport.0 in version "0.0.5" (non-npm: tt-tom17/ioBroker.public-transport#335d0dd3595a1dd8da7aa69116f84923b001ff5b) started with pid 28097
2026-03-09 09:47:45.575  - info: public-transport.0 (28097) starting. Version 0.0.5 (non-npm: tt-tom17/ioBroker.public-transport#335d0dd3595a1dd8da7aa69116f84923b001ff5b) in /opt/iobroker/node_modules/iobroker.public-transport, node: v22.22.0, js-controller: 7.1.0
2026-03-09 09:47:45.634  - info: public-transport.0 (28097) HAFAS-Client initialisiert mit Profil: vbb
2026-03-09 09:47:45.635  - info: public-transport.0 (28097) 1 aktive Station(en) gefunden:
2026-03-09 09:47:45.635  - info: public-transport.0 (28097)   - S Zepernick (ID: 900350163)
2026-03-09 09:47:45.635  - info: public-transport.0 (28097) Rufe Abfahrten ab für: S Zepernick (900350163)
2026-03-09 09:47:46.241  - info: public-transport.0 (28097) Abfahrten aktualisiert für: S Zepernick (900350163)
2026-03-09 09:47:46.241  - info: public-transport.0 (28097) Erste Abfrage abgeschlossen: 1 erfolgreich, 0 fehlgeschlagen
2026-03-09 09:47:46.241  - info: public-transport.0 (28097) Warte auf die nächste Abfrage in 60 Minuten...
2026-03-09 09:47:46.242  - info: public-transport.0 (28097) 1 aktive Station(en) gefunden:
2026-03-09 09:47:46.242  - info: public-transport.0 (28097) Infos für: S Zepernick (900350163) abfragen...
2026-03-09 09:47:50.280  - info: nspanel-lovelace-ui.0 (28082) [Buero] is online!
2026-03-09 09:47:50.972  - info: nspanel-lovelace-ui.0 (28082) [controller] 2 Panels initialized
2026-03-09 09:47:51.086  - info: nspanel-lovelace-ui.0 (28082) [Buero] Panel startup finished!

Thomas Braun

@TT-Tom sagte in iob diag - Skript:

von wo muss es gestartet werden? aus dem iobroker Verzeichnis oder aus meinem user Verzeichnis??

Aus dem Verzeichnis, wo das heruntergeladene Skript liegt. Sollte i.d.R. das home-Verzeichnis des users sein.

Die Meldung
Error: EACCES: permission denied
sollte eigentlich nicht kommen. Aber da es beim 'ordentlichen' Aufruf via 'iob diag' funktioniert ist es auch nicht weiter wichtig.

Den ZibBee-Adapter hast du gar nicht am Start, dafür aber zigbee2mqtt. Passt also in der Ausgabe dann.

Am Rande:
Pending systemupdates: 1

Spiel das nodejs-Update ein. ;-)

Shadowhunter23

Ob das was ausmacht kann @thomas-braun beantworten, dein User hat nicht alle Gruppen. Laut Anleitung müsstest du folgendes tun:

Falls ein User nachträglich angelegt werden soll muss dieser noch per

usermod -aG adm,dialout,sudo,audio,video,plugdev,users,iobroker tom

den relevanten Gruppen hinzugefügt werden.

Ich rufe das Script auch aus dem user Verzeichnis auf und es läuft ohne Probleme ( auch ein LXC ).

TT-Tom

@Thomas-Braun
okay dann ist die obere Ausgabe, wie geschrieben aus dem User-Verzeichnis und unten die normale iob diag vom ioBroker.

Spiel das nodejs-Update ein. ;-)

mach ich :)

TT-Tom

@Shadowhunter23

bleiben die selben Meldungen

TT-Tom

@Thomas-Braun

habe es mal mit unmask aufgerufen
hier ein Fehler in der PanID, wobei ich ja kein Zigbee.0 habe und auch ein ZigbeeOnLan im System

Pan ID:
./iob_diag.sh: line 693: printf: 0x906": invalid hex number
2310

die andern Zigbee Ausgaben passen.

Thomas Braun

@TT-Tom sagte in iob diag - Skript:

habe es mal mit unmask aufgerufen
hier ein Fehler in der PanID,

Danke! Das muss ich abfangen, der Wert wird aus einem USB-Stick bzw. dem nvbackup ausgelesen. Wenn das nicht vorhanden ist kommt diese Meldung.

Kannst du mir die Zigbee-Passage bei dir mal vollständig mit der --unmask Option zeigen?

(Wobei, so ganz eigentlich sollte der Code gar nicht durchlaufen werden, wenn es keine zigbee.X Instanz gibt)

Community Forum

NEWS

iob diag - Skript

Support us

602

32.7k

82.5k

1.3m