Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie'
-
Hatte ich überlegt. Ist aber derzeitig noch im Übergang begriffen und es können beide Formate verwendet werden.
Das nodesource-Repo kommt z. B. im alten Format daher. Andere Quellen müssen ggfls. aber auch noch von Hand gerade gerückt werden. Das wollte ich nicht im Zuge des Distributions-Upgrades noch mitverhandeln.Kann also jeder selber machen.
-
@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Wenn das durchgelaufen ist zieht man den Rest dann per sudo apt full-upgrade nach. Zuvor ist es aber eine gute Idee, alles unnötige zu beenden. Den ioBroker würde ich also schon mal per iob stop aus dem Verkehr ziehen.Bei dieser Formulierung bin ich skeptisch. Vielleicht solltest Du in der Anleitung die Reihenfolge der Befehle umkehren, weil nicht alle dies folgerichtig lesen:
erst
iob stopdannsudo apt full-upgrade. -
Liest man Anleitungen nicht zunächst mal durch und schaut, ob man das versteht?
-
Ich schon, aber ....
-
@thomas-braun sagte in [Upgrade von Debian 12
Liest man Anleitungen nicht zunächst mal durch und schaut, ob man das versteht?
99% wahrscheinlich nicht.
Wenn dann machen die meisten copy Paste
Die wenigsten lesen nach was sie damit verursachen wenn man es nicht dazu schreibt und auf die wahlmöglichkeiten und Konsequenzen aufmerksam macht -
@thomas-braun
Danke für die Anleitung.Frage:
Wäre auf einem 4er Raspi, auf dem nur iob läuft, eine Neuinstallation von trixi einfacher und sicherer?
Also neue SD bzw. USB-Stick > trixi > install ioB > restore ?Wäre das nicht sauberer und bietet weniger Angriffsfläche für Probleme?
tnx && schöne WE
-
@wcag22 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Wäre auf einem 4er Raspi, auf dem nur iob läuft, eine Neuinstallation von trixi einfacher und sicherer?
Das ist auch die offizielle Aussage von RaspberryOS dazu. Deren Empfehlung ist immer: Neuinstallation.
RaspberryOS 13 'Trixie' ist übrigens noch nicht veröffentlicht worden! Das dauert immer ein paar Wochen. Bei Trixie vermutlich noch etwas länger, weil:
Auf dem Weg nach draußen ist zudem armel, für dass es keinen Installer mehr gibt und dass im Kernel nur noch Raspberry Pi 1, Zero und Zero W unterstützt. Benutzer von Armel-Systemen können noch auf Trixie aktualisieren, sofern ihre Hardware von den Kernel-Paketen unterstützt wird oder sie den Kernel eines Drittanbieters verwenden.
-
@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Das ist auch die offizielle Aussage von RaspberryOS dazu. Deren Empfehlung ist immer: Neuinstallation.
RaspberryOS 13 'Trixie' ist übrigens noch nicht veröffentlicht worden! Das dauert immer ein paar Wochen. Bei Trixie vermutlich noch etwas länger, weil:Ok, danke. Dann werde ich wohl noch warten und zu gegebener Zeit einen sauberen Übergang vollziehen.
-
Hi!
Ich habe nun das Upgrade nach der tollen Anleitung gestartet. Sieht für mich auch alles soweit gut aus. Nach den Läufen von sudo apt update und sudo apt full-upgrade sieht bei mir aber die Rückmeldung etwas anders aus als "All packages are up to date."
marcus@iobroker:~$ sudo apt update Hit:1 http://security.debian.org trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 https://apt.grafana.com stable InRelease Get:4 http://deb.debian.org/debian trixie-updates InRelease [47.1 kB] Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Fetched 47.1 kB in 0s (356 kB/s) All packages are up to date. Warning: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details marcus@iobroker:~$ sudo apt full-upgrade Summary: Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0Ist das auch ok? Was muss ich den bezüglich der Warnung bezüglich nodejs unternehmen?
Danke schon mal für etwas Unterstützung hierbei.
-
@hotspot_2 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Was muss ich den bezüglich der Warnung bezüglich nodejs unternehmen?
Nichts. nodesource verwendet noch einen veralteten Schlüssel für die Signaturen. Müssen die mal umstellen.
Ist aber für das Upgrade unerheblich. -
Hallo, habe das Update nach dieser Anleitung erfolgreich durchlaufen lassen.
Trixie ist drauf und lief. Nachdem ich diese Befehle zum Aufräumen per SSH gesendet habe:apt list '~o'
sudo apt purge '~o'
sudo apt --purge autoremove
sudo apt autocleanist leider die Verbindung zu meinem Raspi 4 abgebrochen und er erhält keine LAN Verbindungs IP mehr? Wlan hatte ich zuvor mal über rfkill deaktiviert. Habt Ihr einen Tipp für mich, wie ich die LAN Verbindung wieder an bekomme.
Vielen Dank. -
@thomas-braun Alles klar. Danke!
Ich habe die Umstellung auf die modernen Sourcen gemacht. Ist auch ohne Warnungen oder Fehler durchgelaufen.
The following files need modernizing: - /etc/apt/sources.list - /etc/apt/sources.list.d/grafana.list - /etc/apt/sources.list.d/influxdata.list - /etc/apt/sources.list.d/nodesource.listKann ich davon ausgehen wenn ich danach apt update und apt upgrade gemacht habe und dabei auch alles gut aussieht das die Modernisierung der Quellen geklappt hat?
-
@hotspot_2 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Kann ich davon ausgehen wenn ich danach apt update und apt upgrade gemacht habe und dabei auch alles gut aussieht das die Modernisierung der Quellen geklappt hat?
Ja, du kannst dir aber auch ansehen, wie die Dateien nun aussehen:
ls -l /etc/apt/sources.list ls -l /etc/apt/sources.list.d/Schaut dann so aus:
echad@chet:~ $ ls -l /etc/apt/sources.list ls: cannot access '/etc/apt/sources.list': No such file or directory echad@chet:~ $ ls -l /etc/apt/sources.list.d/ total 48 -rw-r--r-- 1 root root 664 May 27 21:42 debian.sources -rw-r--r-- 1 root root 260 Aug 9 12:09 deconz.sources -rw-r--r-- 1 root root 141 May 30 16:09 github-cli.sources -rw-r--r-- 1 root root 115 May 30 16:10 grafana.sources -rw-r--r-- 1 root root 145 May 30 16:11 influxdata.sources -rw-r--r-- 1 root root 295 May 30 15:44 mosquitto.sources -rw-r--r-- 1 root root 100 Jul 29 17:43 nodesource.list -rw-r--r-- 1 root root 242 Jul 21 12:08 nodesource.sources -rw-r--r-- 1 root root 178 May 30 16:12 ookla_speedtest-cli.sources -rw-r--r-- 1 root root 152 Jun 6 16:27 raspi.sources -rw-r--r-- 1 root root 156 Jun 1 17:09 redis.sources -rw-r--r-- 1 root root 150 May 30 16:15 tailscale.sources echad@chet:~ $Die nodesource.list ist bei mir noch aktiv, da ich das für die Entwicklung des Befehls 'iob nodejs-update' noch brauche.
-
bei mir scheint etwas durcheinander gekommen zu sein
ich kann aktuell nix mehr installieren
bekomme immer die meldungFehler: Widersprüchliche Werte gesetzt für Option Signed-By betreffend die Quelle https://deb.nodesource.com/node_20.x/ nodistro: /etc/apt/keyrings/nodesource.gpg != /usr/share/keyrings/nodesource.gpg Fehler: Die Liste der Quellen konnte nicht gelesen werden.könnte hilfe gebrauche
iob diag```bash Script v.2025-03-08 *** BASE SYSTEM *** Static hostname: smarthome Icon name: computer-desktop Chassis: desktop 🖥️ Operating System: Debian GNU/Linux 13 (trixie) Kernel: Linux 6.12.38+deb13-amd64 Architecture: x86-64 Hardware Vendor: FUJITSU Hardware Model: D2990-A1 Firmware Version: V4.6.4.0 R1.10.0 for D2990-A1x Firmware Date: Mon 2012-04-02 Firmware Age: 13y 4month 1w 1d OS is similar to: model name : Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 13:50:52 up 41 min, 2 users, load average: 2.11, 1.76, 1.38 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sun 2025-08-10 13:50:52 CEST Universal time: Sun 2025-08-10 11:50:52 UTC RTC time: Sun 2025-08-10 11:50:52 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': benjamin HOME=/home/benjamin GROUPS=benjamin cdrom floppy sudo audio dip video plugdev users netdev iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/benjamin GROUPS=iobroker tty dialout audio video plugdev *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.8G 10G 14M 1.6G 11G Swap: 1.0G 0B 1.0G Total: 17G 4.8G 11G Active iob-Instances: 56 15716 M total memory 4595 M used memory 4421 M active memory 951 M inactive memory 9942 M free memory 194 M buffer memory 1289 M swap cache 974 M total swap 0 M used swap 974 M free swap *** top - Table Of Processes *** top - 13:50:52 up 41 min, 2 users, load average: 2.11, 1.76, 1.38 Tasks: 216 total, 3 running, 212 sleeping, 0 stopped, 1 zombie %Cpu(s): 13.3 us, 8.9 sy, 0.0 ni, 77.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 15716.2 total, 9941.6 free, 4595.2 used, 1484.0 buff/cache MiB Swap: 975.0 total, 975.0 free, 0.0 used. 11121.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.7G 0 7.7G 0% /dev tmpfs tmpfs 1.6G 4.2M 1.6G 1% /run /dev/sdd1 ext4 457G 24G 411G 6% / tmpfs tmpfs 7.7G 0 7.7G 0% /dev/shm tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 7.7G 56K 7.7G 1% /tmp /dev/sda1 ext4 1.8T 304G 1.5T 18% /hdd1 /dev/sdb1 ext4 915G 738G 131G 85% /hdd2 tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty6.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.6G 8.0K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Aug 10 13:09:05 2025] EXT4-fs (sdd1): mounted filesystem ae464377-b085-49ec-b984-029b67ef6597 ro with ordered data mode. Quota mode: none. [Sun Aug 10 13:09:06 2025] EXT4-fs (sdd1): re-mounted ae464377-b085-49ec-b984-029b67ef6597 r/w. [Sun Aug 10 13:09:07 2025] EXT4-fs (sda1): mounted filesystem 460e619b-f9db-4a4e-b3b7-36f59fb17cb0 r/w with ordered data mode. Quota mode: none. [Sun Aug 10 13:09:07 2025] EXT4-fs (sdb1): mounted filesystem 22adabf5-6736-41de-8a6d-4e40f90fc2c3 r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sdd1 ext4 rw,relatime,errors=remount-ro |-/hdd1 /dev/sda1 ext4 rw,relatime `-/hdd2 /dev/sdb1 ext4 rw,relatime Files in neuralgic directories: /var: 3.6G /var/ 2.0G /var/www 1.8G /var/www/nextcloud 1.5G /var/www/nextcloud/apps 855M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 69.3M in the file system. /opt/iobroker/backups: 7.9G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.8G /opt/iobroker/iobroker-data/ 2.9G /opt/iobroker/iobroker-data/history 727M /opt/iobroker/iobroker-data/files 156M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 36M /opt/iobroker/iobroker-data/objects.jsonl 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400785-if00 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.4 /usr/bin/node v20.19.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 E: Conflicting values set for option Signed-By regarding source https://deb.nodesource.com/node_20.x/ nodistro: /etc/apt/keyrings/nodesource.gpg != /usr/share/keyrings/nodesource.gpg E: The list of sources could not be read. Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: smarthome smarthome (version: 7.0.6, hostname: smarthome , alive, uptime: 2510) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 6 +-- homebridge-tapo@1.5.2 (git+ssh://git@github.com/apatsufas/homebridge-tapo-p100.git#aaddca772e05ea766a60dcdf34b35a521fdab79d) +-- iobroker.info@2.0.0 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.info.git#863fada0c02d8c0f718022943bb783f40514f059) +-- iobroker.komoot@0.4.0 (git+ssh://git@github.com/basti4557/ioBroker.komoot.git#278f41712220024f1ace4d3c19bf0b6bbf166bf1) +-- iobroker.nctalk@0.3.0 (git+ssh://git@github.com/jjqoie/ioBroker.nctalk.git#fec263972526a580c6b1e24f7b1455c44600a196) +-- iobroker.sourceanalytix@0.4.15-alpha.1 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#1010e11d126dc2e9639b70f17b79d082dead83ba) +-- iobroker.tapo@0.4.8 (git+ssh://git@github.com/TA2k/ioBroker.tapo.git#615315d4bae5c77b153ac5067bdca8ba3ad3996f) Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 192.168.178.12, run as: benjamin system.adapter.alexa-timer-vis.0 : alexa-timer-vis : smarthome - disabled + system.adapter.alexa2.0 : alexa2 : smarthome - enabled system.adapter.alias-manager.0 : alias-manager : smarthome - disabled + system.adapter.awtrix-light.0 : awtrix-light : smarthome - enabled + system.adapter.awtrix-light.1 : awtrix-light : smarthome - enabled + system.adapter.backitup.0 : backitup : smarthome - enabled system.adapter.birthdays.0 : birthdays : smarthome - enabled system.adapter.calendar.0 : calendar : smarthome - disabled, port: 8095 + system.adapter.cameras.0 : cameras : smarthome - enabled, port: 8203, bind: 127.0.0.1 + system.adapter.cloud.0 : cloud : smarthome - enabled system.adapter.contact.0 : contact : smarthome - disabled, port: 8096 system.adapter.daswetter.0 : daswetter : smarthome - enabled + system.adapter.device-reminder.0 : device-reminder : smarthome - enabled + system.adapter.device-watcher.0 : device-watcher : smarthome - enabled system.adapter.devices.0 : devices : smarthome - disabled + system.adapter.discovery.0 : discovery : smarthome - enabled system.adapter.doorbird.0 : doorbird : smarthome - disabled + system.adapter.echarts.0 : echarts : smarthome - enabled system.adapter.email.0 : email : smarthome - disabled system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: smarthome - disabled system.adapter.energiefluss.0 : energiefluss : smarthome - disabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : smarthome - enabled system.adapter.feiertage.0 : feiertage : smarthome - enabled system.adapter.flexcharts.0 : flexcharts : smarthome - enabled + system.adapter.fritzbox.0 : fritzbox : smarthome - enabled + system.adapter.fullcalendar.0 : fullcalendar : smarthome - enabled + system.adapter.history.0 : history : smarthome - enabled + system.adapter.homeconnect.0 : homeconnect : smarthome - enabled system.adapter.ical.0 : ical : smarthome - enabled system.adapter.ical.1 : ical : smarthome - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : smarthome - disabled + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.info.0 : info : smarthome - enabled + system.adapter.iot.0 : iot : smarthome - enabled system.adapter.iot.1 : iot : smarthome - disabled system.adapter.iqontrol.0 : iqontrol : smarthome - disabled system.adapter.jarvis.0 : jarvis : smarthome - disabled + system.adapter.javascript.0 : javascript : smarthome - enabled system.adapter.javascript.1 : javascript : smarthome - disabled system.adapter.komoot.0 : komoot : smarthome - disabled system.adapter.life360.0 : life360 : smarthome - disabled system.adapter.linux-control.0 : linux-control : smarthome - disabled + system.adapter.matter.0 : matter : smarthome - enabled system.adapter.mobile.0 : mobile : smarthome - disabled system.adapter.modbus.0 : modbus : smarthome - disabled + system.adapter.modbus.1 : modbus : smarthome - enabled system.adapter.modbus.2 : modbus : smarthome - disabled + system.adapter.mqtt-client.0 : mqtt-client : smarthome - enabled, port: 1884 + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 system.adapter.nctalk.0 : nctalk : smarthome - disabled, port: 443 system.adapter.nctalk.1 : nctalk : smarthome - disabled, port: 443 system.adapter.netatmo-crawler.0 : netatmo-crawler : smarthome - enabled + system.adapter.nina.0 : nina : smarthome - enabled + system.adapter.node-red.0 : node-red : smarthome - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : smarthome - enabled + system.adapter.opendtu.0 : opendtu : smarthome - enabled system.adapter.openweathermap.0 : openweathermap : smarthome - enabled system.adapter.owntracks.0 : owntracks : smarthome - disabled, port: 2886, bind: 0.0.0.0 system.adapter.pi-hole.0 : pi-hole : smarthome - disabled + system.adapter.ping.0 : ping : smarthome - enabled system.adapter.scenes.0 : scenes : smarthome - disabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 192.168.178.12 + system.adapter.shelly.1 : shelly : smarthome - enabled, port: 1889, bind: 192.168.178.12 + system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 192.168.178.12, run as: admin + system.adapter.socketio.0 : socketio : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.solarwetter.0 : solarwetter : smarthome - enabled + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.1 : sourceanalytix : smarthome - enabled + system.adapter.spotify-premium.0 : spotify-premium : smarthome - enabled + system.adapter.statistics.0 : statistics : smarthome - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : smarthome - enabled + system.adapter.tapo.0 : tapo : smarthome - enabled system.adapter.telegram-menu.0 : telegram-menu : smarthome - disabled + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : smarthome - enabled + system.adapter.tibberlink.0 : tibberlink : smarthome - enabled system.adapter.time-switch.0 : time-switch : smarthome - disabled + system.adapter.tr-064.0 : tr-064 : smarthome - enabled + system.adapter.tr-064.1 : tr-064 : smarthome - enabled system.adapter.traccar.0 : traccar : smarthome - disabled + system.adapter.trashschedule.0 : trashschedule : smarthome - enabled + system.adapter.tuya.0 : tuya : smarthome - enabled system.adapter.tuya.1 : tuya : smarthome - disabled system.adapter.tvprogram.0 : tvprogram : smarthome - disabled system.adapter.tvspielfilm.0 : tvspielfilm : smarthome - disabled + system.adapter.upnp.0 : upnp : smarthome - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : smarthome - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : smarthome - disabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : smarthome - disabled system.adapter.vis-map.0 : vis-map : smarthome - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : smarthome - disabled system.adapter.vis-metro.0 : vis-metro : smarthome - disabled system.adapter.vis-players.0 : vis-players : smarthome - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : smarthome - disabled system.adapter.vis.0 : vis : smarthome - enabled + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.windows-control.0 : windows-control : smarthome - enabled system.adapter.wled.0 : wled : smarthome - disabled + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 192.168.178.12, run as: benjamin + system.adapter.cameras.0 : cameras : smarthome - enabled, port: 8203, bind: 127.0.0.1 + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.mqtt-client.0 : mqtt-client : smarthome - enabled, port: 1884 + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : smarthome - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 192.168.178.12 + system.adapter.shelly.1 : shelly : smarthome - enabled, port: 1889, bind: 192.168.178.12 + system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 192.168.178.12, run as: admin + system.adapter.socketio.0 : socketio : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "alexa-timer-vis": 2.1.1 , installed 2.1.1 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "birthdays" : 4.0.0 , installed 4.0.0 Adapter "cameras" : 2.1.2 , installed 2.1.2 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.2.3 , installed 3.2.3 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss" : 3.6.2 , installed 3.6.2 Adapter "energiefluss-erweitert": 0.7.7, installed 0.7.7 Adapter "fb-checkpresence": 1.4.0 , installed 1.4.0 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flexcharts" : 0.4.1 , installed 0.4.1 Adapter "fritzbox" : 0.6.0 , installed 0.6.0 Adapter "fullcalendar" : 2.4.5 , installed 2.4.5 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "matter" : 0.5.1 , installed 0.5.1 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "netatmo-crawler": 1.0.0 , installed 1.0.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "notification-manager": 1.2.1, installed 1.2.1 Adapter "opendtu" : 3.1.0 , installed 3.1.0 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "owntracks" : 1.1.0 , installed 1.1.0 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 10.1.0 , installed 10.1.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "solarwetter" : 1.2.0 , installed 1.2.0 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "spotify-premium": 1.5.2 , installed 1.5.2 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "telegram-menu": 2.4.4 , installed 2.4.4 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 5.0.0 , installed 5.0.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "traccar" : 1.1.6 , installed 1.1.6 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "tvprogram" : 4.0.0 , installed 4.0.0 Adapter "tvspielfilm" : 2.1.0 , installed 2.1.0 Adapter "upnp" : 1.1.0 , installed 1.1.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.12.0 , installed 1.12.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 38662 States: 32995 *** OS-Repositories and Updates *** E: Conflicting values set for option Signed-By regarding source https://deb.nodesource.com/node_20.x/ nodistro: /etc/apt/keyrings/nodesource.gpg != /usr/share/keyrings/nodesource.gpg E: The list of sources could not be read. E: Conflicting values set for option Signed-By regarding source https://deb.nodesource.com/node_20.x/ nodistro: /etc/apt/keyrings/nodesource.gpg != /usr/share/keyrings/nodesource.gpg E: The list of sources could not be read. E: Conflicting values set for option Signed-By regarding source https://deb.nodesource.com/node_20.x/ nodistro: /etc/apt/keyrings/nodesource.gpg != /usr/share/keyrings/nodesource.gpg E: The list of sources could not be read. Pending Updates: *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 8153 1497/smbd tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 8154 1497/smbd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4185 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7065 1134/sshd: /usr/sbi tcp 0 0 0.0.0.0:8200 0.0.0.0:* LISTEN 105 9362 744/minidlnad tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 12002 2137/io.sonoff.0 tcp 0 0 127.0.0.1:4101 0.0.0.0:* LISTEN 0 7714 711/brltty tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 9861 1762/node-red tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 12700 1977/io.mqtt.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 12699 1977/io.mqtt.0 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN 0 10699 1427/perl tcp 0 0 192.168.178.12:8081 0.0.0.0:* LISTEN 1001 10941 1602/io.admin.0 tcp 0 0 192.168.178.12:8087 0.0.0.0:* LISTEN 1001 25921 3375/io.simple-api. tcp 0 0 192.168.178.12:1889 0.0.0.0:* LISTEN 1001 20602 2295/io.shelly.1 tcp 0 0 192.168.178.12:1882 0.0.0.0:* LISTEN 1001 11978 2116/io.shelly.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11434 1402/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12300 1402/iobroker.js-co tcp 0 0 127.0.0.1:8203 0.0.0.0:* LISTEN 1001 30299 3848/io.cameras.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 7098 1150/exim4 tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 104 8506 1125/mariadbd tcp 0 0 127.0.0.1:3551 0.0.0.0:* LISTEN 0 6091 826/apcupsd tcp 0 0 127.0.0.1:11211 0.0.0.0:* LISTEN 107 8279 740/memcached tcp6 0 0 :::443 :::* LISTEN 0 8404 1173/apache2 tcp6 0 0 :::445 :::* LISTEN 0 8151 1497/smbd tcp6 0 0 ::1:25 :::* LISTEN 0 7099 1150/exim4 tcp6 0 0 :::139 :::* LISTEN 0 8152 1497/smbd tcp6 0 0 :::111 :::* LISTEN 0 492 1/init tcp6 0 0 :::80 :::* LISTEN 0 8400 1173/apache2 tcp6 0 0 :::22 :::* LISTEN 0 7067 1134/sshd: /usr/sbi tcp6 0 0 :::10000 :::* LISTEN 0 10700 1427/perl tcp6 0 0 ::1:11211 :::* LISTEN 107 8280 740/memcached tcp6 0 0 ::1:4101 :::* LISTEN 0 7074 711/brltty tcp6 0 0 :::8082 :::* LISTEN 1001 29216 3697/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 9393 791/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 25292 3418/io.socketio.0 udp 0 0 192.168.178.12:5353 0.0.0.0:* 1001 19007 2286/io.tr-064.1 udp 0 0 192.168.178.12:5353 0.0.0.0:* 1001 13968 2195/io.tr-064.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 14584 2222/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 14585 2222/io.tuya.0 udp 0 0 0.0.0.0:48943 0.0.0.0:* 1001 26581 3597/io.upnp.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 5895 667/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4186 1/init udp 0 0 192.168.178.12:41094 0.0.0.0:* 105 9432 744/minidlnad udp 0 0 192.168.178.255:137 0.0.0.0:* 0 8054 1285/nmbd udp 0 0 192.168.178.12:137 0.0.0.0:* 0 8053 1285/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 7795 1285/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 8056 1285/nmbd udp 0 0 192.168.178.12:138 0.0.0.0:* 0 8055 1285/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 7796 1285/nmbd udp 0 0 0.0.0.0:10000 0.0.0.0:* 0 10701 1427/perl udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 29055 3597/io.upnp.0 udp 0 0 239.255.255.250:1900 0.0.0.0:* 105 9361 744/minidlnad udp6 0 0 :::111 :::* 0 2843 1/init *** Log File - Last 25 Lines *** 2025-08-10 13:45:28.382 - info: host.smarthome instance system.adapter.netatmo-crawler.0 having pid 13685 terminated with code 0 (NO_ERROR) 2025-08-10 13:46:06.850 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: erkennung 2025-08-10 13:46:06.850 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: geht los 2025-08-10 13:46:06.850 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: stop 2025-08-10 13:46:38.210 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: erkennung 2025-08-10 13:46:38.210 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: geht los 2025-08-10 13:46:38.210 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: stop 2025-08-10 13:47:46.190 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: erkennung 2025-08-10 13:47:46.190 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: geht los 2025-08-10 13:47:46.190 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: stop 2025-08-10 13:48:39.439 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: erkennung 2025-08-10 13:48:39.440 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: geht los 2025-08-10 13:48:39.440 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: stop 2025-08-10 13:49:41.897 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: erkennung 2025-08-10 13:49:41.897 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: geht los 2025-08-10 13:49:41.897 - info: javascript.0 (1710) script.js.common.Küche.küche_mit_astrozeiten: stop 2025-08-10 13:50:24.021 - info: host.smarthome instance system.adapter.netatmo-crawler.0 in version "1.0.0" started with pid 15237 2025-08-10 13:50:25.402 - info: netatmo-crawler.0 (15237) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v20.19.4, js-controller: 7.0.6 2025-08-10 13:50:25.433 - info: netatmo-crawler.0 (15237) Getting data for stationid:70:ee:50:a4:36:08 2025-08-10 13:50:26.906 - info: netatmo-crawler.0 (15237) Getting data for stationid:70:ee:50:71:55:86 2025-08-10 13:50:28.883 - info: netatmo-crawler.0 (15237) Got no station data. Trying again 2025-08-10 13:50:29.884 - info: netatmo-crawler.0 (15237) Getting data for stationid:70:ee:50:71:55:86 2025-08-10 13:50:29.955 - warn: netatmo-crawler.0 (15237) Could not work with station 2 - Message: Did not get any values for station 70:ee:50:71:55:86 2025-08-10 13:50:29.956 - info: netatmo-crawler.0 (15237) Terminated (NO_ERROR): Everything done. Going to terminate till next schedule 2025-08-10 13:50:30.478 - info: host.smarthome instance system.adapter.netatmo-crawler.0 having pid 15237 terminated with code 0 (NO_ERROR)============ Mark until here for C&P =============
iob diag has finished.
meldung iobrokerhost.smarthome 2025-08-10 13:55:37.995 warn Could not check for new OS updates: Command failed: sudo apt list --upgradeableWARNING: apt does not have a stable CLI interface. Use with caution in scripts.Fehler: Widersprüchliche Werte gesetzt für Option Signed-By betreffend die Quelle https://deb.nodesource.com/node_20.x/ nodistro: /etc/apt/keyrings/nodesource.gpg != /usr/share/keyrings/nodesource.gpgFehler: Die Liste der Quellen konnte nicht gelesen werden. -
@benbensimpson2204 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
sudo usermod -a -G adm benjaminHast du die Paketquellen auf das neue Format 'modernisiert'?
Wie sieht die/etc/apt/sources.list.d/nodesource.sourcesdann aus?
Bei mir z. B. dann so:Enabled: yes Types: deb URIs: https://deb.nodesource.com/node_20.x/ Suites: nodistro Components: main Architectures: arm64 Signed-By: /etc/apt/keyrings/nodesource.gpg -
@thomas-braun
Wie sieht die /etc/apt/sources.list.d/nodesource.sources dann aus?Types: deb URIs: https://deb.nodesource.com/node_20.x/ Suites: nodistro Components: main Signed-By: /etc/apt/keyrings/nodesource.gpg Types: deb URIs: https://deb.nodesource.com/node_20.x/ Suites: nodistro Components: main Signed-By: /usr/share/keyrings/nodesource.gpgsudo usermod -a -G adm benjamin
diesen Befehl habe ich bei der Installation eine anderen Software benutzt
war das falsch ?? -
Lösch den zweiten Block raus.
diesen Befehl habe ich bei der Installation eine anderen Software benutzt
Hat sich aber nicht ausgewirkt, der banjamin ist nicht in der Gruppe adm drin. Mal sauber neugestartet? Gruppenänderungen werden nur beim einloggen gelesen.
-
hab den Eintrag gelöscht und neugestartet. Ein Problem ist schon mal behoben
iob diagScript v.2025-03-08 *** BASE SYSTEM *** Static hostname: smarthome Icon name: computer-desktop Chassis: desktop 🖥️ Operating System: Debian GNU/Linux 13 (trixie) Kernel: Linux 6.12.38+deb13-amd64 Architecture: x86-64 Hardware Vendor: FUJITSU Hardware Model: D2990-A1 Firmware Version: V4.6.4.0 R1.10.0 for D2990-A1x Firmware Date: Mon 2012-04-02 Firmware Age: 13y 4month 1w 1d OS is similar to: model name : Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 14:27:32 up 4 min, 2 users, load average: 3.83, 2.07, 0.85 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sun 2025-08-10 14:27:32 CEST Universal time: Sun 2025-08-10 12:27:32 UTC RTC time: Sun 2025-08-10 12:27:32 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': benjamin HOME=/home/benjamin GROUPS=benjamin cdrom floppy sudo audio dip video plugdev users netdev iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/benjamin GROUPS=iobroker tty dialout audio video plugdev *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.4G 11G 9.5M 1.3G 12G Swap: 1.0G 0B 1.0G Total: 17G 4.4G 12G Active iob-Instances: 42 15716 M total memory 4213 M used memory 4056 M active memory 738 M inactive memory 10560 M free memory 165 M buffer memory 1066 M swap cache 974 M total swap 0 M used swap 974 M free swap *** top - Table Of Processes *** top - 14:27:32 up 4 min, 2 users, load average: 3.83, 2.07, 0.85 Tasks: 218 total, 5 running, 212 sleeping, 0 stopped, 1 zombie %Cpu(s): 66.7 us, 2.4 sy, 0.0 ni, 31.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 15716.2 total, 10635.5 free, 4137.8 used, 1232.8 buff/cache MiB Swap: 975.0 total, 975.0 free, 0.0 used. 11578.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.7G 0 7.7G 0% /dev tmpfs tmpfs 1.6G 4.0M 1.6G 1% /run /dev/sdd1 ext4 457G 24G 410G 6% / tmpfs tmpfs 7.7G 0 7.7G 0% /dev/shm tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 7.7G 52K 7.7G 1% /tmp /dev/sda1 ext4 1.8T 304G 1.5T 18% /hdd1 /dev/sdb1 ext4 915G 738G 131G 85% /hdd2 tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.6G 8.0K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Aug 10 14:23:23 2025] EXT4-fs (sdd1): mounted filesystem ae464377-b085-49ec-b984-029b67ef6597 ro with ordered data mode. Quota mode: none. [Sun Aug 10 14:23:24 2025] EXT4-fs (sdd1): re-mounted ae464377-b085-49ec-b984-029b67ef6597 r/w. [Sun Aug 10 14:23:25 2025] EXT4-fs (sda1): mounted filesystem 460e619b-f9db-4a4e-b3b7-36f59fb17cb0 r/w with ordered data mode. Quota mode: none. [Sun Aug 10 14:23:25 2025] EXT4-fs (sdb1): mounted filesystem 22adabf5-6736-41de-8a6d-4e40f90fc2c3 r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sdd1 ext4 rw,relatime,errors=remount-ro |-/hdd1 /dev/sda1 ext4 rw,relatime `-/hdd2 /dev/sdb1 ext4 rw,relatime Files in neuralgic directories: /var: 3.6G /var/ 2.0G /var/www 1.8G /var/www/nextcloud 1.5G /var/www/nextcloud/apps 855M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 69.3M in the file system. /opt/iobroker/backups: 7.9G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.9G /opt/iobroker/iobroker-data/ 2.9G /opt/iobroker/iobroker-data/history 727M /opt/iobroker/iobroker-data/files 156M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 89M /opt/iobroker/iobroker-data/states.jsonl 55M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400785-if00 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.4 /usr/bin/node v20.19.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.4-1nodesource1 Candidate: 20.19.4-1nodesource1 Version table: *** 20.19.4-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.19.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages 20.19.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: smarthome smarthome (version: 7.0.6, hostname: smarthome , alive, uptime: 244) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 6 +-- homebridge-tapo@1.5.2 (git+ssh://git@github.com/apatsufas/homebridge-tapo-p100.git#aaddca772e05ea766a60dcdf34b35a521fdab79d) +-- iobroker.info@2.0.0 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.info.git#863fada0c02d8c0f718022943bb783f40514f059) +-- iobroker.komoot@0.4.0 (git+ssh://git@github.com/basti4557/ioBroker.komoot.git#278f41712220024f1ace4d3c19bf0b6bbf166bf1) +-- iobroker.nctalk@0.3.0 (git+ssh://git@github.com/jjqoie/ioBroker.nctalk.git#fec263972526a580c6b1e24f7b1455c44600a196) +-- iobroker.sourceanalytix@0.4.15-alpha.1 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#1010e11d126dc2e9639b70f17b79d082dead83ba) +-- iobroker.tapo@0.4.8 (git+ssh://git@github.com/TA2k/ioBroker.tapo.git#615315d4bae5c77b153ac5067bdca8ba3ad3996f) Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 192.168.178.12, run as: benjamin system.adapter.alexa-timer-vis.0 : alexa-timer-vis : smarthome - disabled + system.adapter.alexa2.0 : alexa2 : smarthome - enabled system.adapter.alias-manager.0 : alias-manager : smarthome - disabled + system.adapter.awtrix-light.0 : awtrix-light : smarthome - enabled + system.adapter.awtrix-light.1 : awtrix-light : smarthome - enabled + system.adapter.backitup.0 : backitup : smarthome - enabled system.adapter.birthdays.0 : birthdays : smarthome - enabled system.adapter.calendar.0 : calendar : smarthome - disabled, port: 8095 system.adapter.cameras.0 : cameras : smarthome - enabled, port: 8203, bind: 127.0.0.1 + system.adapter.cloud.0 : cloud : smarthome - enabled system.adapter.contact.0 : contact : smarthome - disabled, port: 8096 system.adapter.daswetter.0 : daswetter : smarthome - enabled + system.adapter.device-reminder.0 : device-reminder : smarthome - enabled + system.adapter.device-watcher.0 : device-watcher : smarthome - enabled system.adapter.devices.0 : devices : smarthome - disabled + system.adapter.discovery.0 : discovery : smarthome - enabled system.adapter.doorbird.0 : doorbird : smarthome - disabled + system.adapter.echarts.0 : echarts : smarthome - enabled system.adapter.email.0 : email : smarthome - disabled system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: smarthome - disabled system.adapter.energiefluss.0 : energiefluss : smarthome - disabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : smarthome - enabled system.adapter.feiertage.0 : feiertage : smarthome - enabled system.adapter.flexcharts.0 : flexcharts : smarthome - enabled + system.adapter.fritzbox.0 : fritzbox : smarthome - enabled system.adapter.fullcalendar.0 : fullcalendar : smarthome - enabled + system.adapter.history.0 : history : smarthome - enabled + system.adapter.homeconnect.0 : homeconnect : smarthome - enabled system.adapter.ical.0 : ical : smarthome - enabled system.adapter.ical.1 : ical : smarthome - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : smarthome - disabled + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.info.0 : info : smarthome - enabled + system.adapter.iot.0 : iot : smarthome - enabled system.adapter.iot.1 : iot : smarthome - disabled system.adapter.iqontrol.0 : iqontrol : smarthome - disabled system.adapter.jarvis.0 : jarvis : smarthome - disabled + system.adapter.javascript.0 : javascript : smarthome - enabled system.adapter.javascript.1 : javascript : smarthome - disabled system.adapter.komoot.0 : komoot : smarthome - disabled system.adapter.life360.0 : life360 : smarthome - disabled system.adapter.linux-control.0 : linux-control : smarthome - disabled system.adapter.matter.0 : matter : smarthome - enabled system.adapter.mobile.0 : mobile : smarthome - disabled system.adapter.modbus.0 : modbus : smarthome - disabled + system.adapter.modbus.1 : modbus : smarthome - enabled system.adapter.modbus.2 : modbus : smarthome - disabled + system.adapter.mqtt-client.0 : mqtt-client : smarthome - enabled, port: 1884 + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 system.adapter.nctalk.0 : nctalk : smarthome - disabled, port: 443 system.adapter.nctalk.1 : nctalk : smarthome - disabled, port: 443 + system.adapter.netatmo-crawler.0 : netatmo-crawler : smarthome - enabled system.adapter.nina.0 : nina : smarthome - enabled + system.adapter.node-red.0 : node-red : smarthome - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : smarthome - enabled + system.adapter.opendtu.0 : opendtu : smarthome - enabled system.adapter.openweathermap.0 : openweathermap : smarthome - enabled system.adapter.owntracks.0 : owntracks : smarthome - disabled, port: 2886, bind: 0.0.0.0 system.adapter.pi-hole.0 : pi-hole : smarthome - disabled + system.adapter.ping.0 : ping : smarthome - enabled system.adapter.scenes.0 : scenes : smarthome - disabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 192.168.178.12 + system.adapter.shelly.1 : shelly : smarthome - enabled, port: 1889, bind: 192.168.178.12 system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 192.168.178.12, run as: admin system.adapter.socketio.0 : socketio : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.solarwetter.0 : solarwetter : smarthome - enabled + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 system.adapter.sourceanalytix.1 : sourceanalytix : smarthome - enabled + system.adapter.spotify-premium.0 : spotify-premium : smarthome - enabled system.adapter.statistics.0 : statistics : smarthome - enabled system.adapter.tankerkoenig.0 : tankerkoenig : smarthome - enabled system.adapter.tapo.0 : tapo : smarthome - enabled system.adapter.telegram-menu.0 : telegram-menu : smarthome - disabled + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : smarthome - enabled + system.adapter.tibberlink.0 : tibberlink : smarthome - enabled system.adapter.time-switch.0 : time-switch : smarthome - disabled + system.adapter.tr-064.0 : tr-064 : smarthome - enabled + system.adapter.tr-064.1 : tr-064 : smarthome - enabled system.adapter.traccar.0 : traccar : smarthome - disabled system.adapter.trashschedule.0 : trashschedule : smarthome - enabled + system.adapter.tuya.0 : tuya : smarthome - enabled system.adapter.tuya.1 : tuya : smarthome - disabled system.adapter.tvprogram.0 : tvprogram : smarthome - disabled system.adapter.tvspielfilm.0 : tvspielfilm : smarthome - disabled system.adapter.upnp.0 : upnp : smarthome - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : smarthome - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : smarthome - disabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - disabled system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : smarthome - disabled system.adapter.vis-map.0 : vis-map : smarthome - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : smarthome - disabled system.adapter.vis-metro.0 : vis-metro : smarthome - disabled system.adapter.vis-players.0 : vis-players : smarthome - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : smarthome - disabled system.adapter.vis.0 : vis : smarthome - enabled system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.windows-control.0 : windows-control : smarthome - enabled system.adapter.wled.0 : wled : smarthome - disabled + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 192.168.178.12, run as: benjamin system.adapter.cameras.0 : cameras : smarthome - enabled, port: 8203, bind: 127.0.0.1 + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.mqtt-client.0 : mqtt-client : smarthome - enabled, port: 1884 + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : smarthome - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 192.168.178.12 + system.adapter.shelly.1 : shelly : smarthome - enabled, port: 1889, bind: 192.168.178.12 system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 192.168.178.12, run as: admin system.adapter.socketio.0 : socketio : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "alexa-timer-vis": 2.1.1 , installed 2.1.1 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "birthdays" : 4.0.0 , installed 4.0.0 Adapter "cameras" : 2.1.2 , installed 2.1.2 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.2.3 , installed 3.2.3 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss" : 3.6.2 , installed 3.6.2 Adapter "energiefluss-erweitert": 0.7.7, installed 0.7.7 Adapter "fb-checkpresence": 1.4.0 , installed 1.4.0 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flexcharts" : 0.4.1 , installed 0.4.1 Adapter "fritzbox" : 0.6.0 , installed 0.6.0 Adapter "fullcalendar" : 2.4.5 , installed 2.4.5 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "matter" : 0.5.1 , installed 0.5.1 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "netatmo-crawler": 1.0.0 , installed 1.0.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "notification-manager": 1.2.1, installed 1.2.1 Adapter "opendtu" : 3.1.0 , installed 3.1.0 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "owntracks" : 1.1.0 , installed 1.1.0 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 10.1.0 , installed 10.1.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "solarwetter" : 1.2.0 , installed 1.2.0 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "spotify-premium": 1.5.2 , installed 1.5.2 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "telegram-menu": 2.4.4 , installed 2.4.4 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 5.0.0 , installed 5.0.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "traccar" : 1.1.6 , installed 1.1.6 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "tvprogram" : 4.0.0 , installed 4.0.0 Adapter "tvspielfilm" : 2.1.0 , installed 2.1.0 Adapter "upnp" : 1.1.0 , installed 1.1.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.12.0 , installed 1.12.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 38662 States: 33083 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://security.debian.org/debian-security trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 https://packages.sury.org/php trixie InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://download.webmin.com/download/newkey/repository stable InRelease Reading package lists... W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.12:1882 0.0.0.0:* LISTEN 1001 13598 2062/io.shelly.0 tcp 0 0 192.168.178.12:1889 0.0.0.0:* LISTEN 1001 13009 2229/io.shelly.1 tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 7965 1370/smbd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7523 1108/sshd: /usr/sbi tcp 0 0 0.0.0.0:8200 0.0.0.0:* LISTEN 105 8626 737/minidlnad tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 428 1/init tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 7966 1370/smbd tcp 0 0 127.0.0.1:4101 0.0.0.0:* LISTEN 0 9469 700/brltty tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN 0 10379 1442/perl tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 11090 1725/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 13619 2083/io.sonoff.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 11602 1924/io.mqtt.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 11601 1924/io.mqtt.0 tcp 0 0 127.0.0.1:11211 0.0.0.0:* LISTEN 107 8354 735/memcached tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 104 9708 1106/mariadbd tcp 0 0 127.0.0.1:3551 0.0.0.0:* LISTEN 0 6865 786/apcupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 10033 1430/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11287 1430/iobroker.js-co tcp 0 0 192.168.178.12:8081 0.0.0.0:* LISTEN 1001 11309 1564/io.admin.0 tcp 0 0 192.168.178.12:8087 0.0.0.0:* LISTEN 1001 20880 3367/io.simple-api. tcp 0 0 127.0.0.1:8203 0.0.0.0:* LISTEN 1001 27159 4094/io.cameras.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 9509 1129/exim4 tcp6 0 0 ::1:11211 :::* LISTEN 107 8355 735/memcached tcp6 0 0 :::443 :::* LISTEN 0 7544 1151/apache2 tcp6 0 0 :::445 :::* LISTEN 0 7963 1370/smbd tcp6 0 0 :::22 :::* LISTEN 0 7525 1108/sshd: /usr/sbi tcp6 0 0 :::111 :::* LISTEN 0 3648 1/init tcp6 0 0 :::80 :::* LISTEN 0 7540 1151/apache2 tcp6 0 0 :::139 :::* LISTEN 0 7964 1370/smbd tcp6 0 0 ::1:25 :::* LISTEN 0 9510 1129/exim4 tcp6 0 0 :::10000 :::* LISTEN 0 10380 1442/perl tcp6 0 0 :::8082 :::* LISTEN 1001 24810 3712/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 20895 3407/io.socketio.0 tcp6 0 0 :::8086 :::* LISTEN 999 8698 776/influxd tcp6 0 0 ::1:4101 :::* LISTEN 0 7036 700/brltty udp 0 0 192.168.178.12:44707 0.0.0.0:* 105 8629 737/minidlnad udp 0 0 0.0.0.0:45568 0.0.0.0:* 1001 23645 3607/io.upnp.0 udp 0 0 192.168.178.12:5353 0.0.0.0:* 1001 14002 2211/io.tr-064.1 udp 0 0 192.168.178.12:5353 0.0.0.0:* 1001 12807 2145/io.tr-064.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 12870 2169/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 12871 2169/io.tuya.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 1885 637/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 429 1/init udp 0 0 192.168.178.255:137 0.0.0.0:* 0 9644 1261/nmbd udp 0 0 192.168.178.12:137 0.0.0.0:* 0 9643 1261/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 9592 1261/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 9646 1261/nmbd udp 0 0 192.168.178.12:138 0.0.0.0:* 0 9645 1261/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 9593 1261/nmbd udp 0 0 0.0.0.0:10000 0.0.0.0:* 0 10381 1442/perl udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24050 3607/io.upnp.0 udp 0 0 239.255.255.250:1900 0.0.0.0:* 105 8625 737/minidlnad udp6 0 0 :::111 :::* 0 4306 1/init *** Log File - Last 25 Lines *** 2025-08-10 14:27:32.656 - info: host.smarthome instance system.adapter.windows-control.0 in version "0.1.5" started with pid 3850 2025-08-10 14:27:34.102 - info: windows-control.0 (3850) starting. Version 0.1.5 in /opt/iobroker/node_modules/iobroker.windows-control, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:34.126 - info: windows-control.0 (3850) 1 device(s) and 1 user command(s) configured. 2025-08-10 14:27:36.698 - info: host.smarthome instance system.adapter.tapo.0 in version "0.4.8" (non-npm: TA2k/ioBroker.tapo#615315d4bae5c77b153ac5067bdca8ba3ad3996f) started with pid 3983 2025-08-10 14:27:38.161 - info: tuya.0 (2169) 817027002462ab43f9cd: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.94:6668 2025-08-10 14:27:38.237 - info: tapo.0 (3983) starting. Version 0.4.8 (non-npm: TA2k/ioBroker.tapo#615315d4bae5c77b153ac5067bdca8ba3ad3996f) in /opt/iobroker/node_modules/iobroker.tapo, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:38.267 - info: tapo.0 (3983) Login tp TAPO App 2025-08-10 14:27:38.624 - info: tapo.0 (3983) Login succesfull 2025-08-10 14:27:38.846 - info: tapo.0 (3983) Found 1 devices 2025-08-10 14:27:39.074 - info: tapo.0 (3983) Init device 8021539C0D3244BA58E2657868FCEAEE2392A940 type TC60 5.0 with ip 192.168.178.63 2025-08-10 14:27:39.231 - info: tapo.0 (3983) 8021539C0D3244BA58E2657868FCEAEE2392A940 Received device info {"manufacturer":"tp-link","model":"Tapo TC60","firmwareVersion":"1.2.4 Build 250418 Rel.63398n","serialNumber":"746183f1","hardwareId":5} 2025-08-10 14:27:39.243 - info: tapo.0 (3983) Initialized 8021539C0D3244BA58E2657868FCEAEE2392A940 2025-08-10 14:27:39.270 - info: tapo.0 (3983) Wait for connections for non camera devices 2025-08-10 14:27:40.724 - info: host.smarthome instance system.adapter.cameras.0 in version "2.1.2" started with pid 4094 2025-08-10 14:27:42.235 - info: cameras.0 (4094) starting. Version 2.1.2 in /opt/iobroker/node_modules/iobroker.cameras, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:44.609 - info: host.smarthome instance system.adapter.matter.0 in version "0.5.1" started with pid 4139 2025-08-10 14:27:44.797 - info: cameras.0 (4094) Server started on 127.0.0.1:8203 2025-08-10 14:27:49.232 - info: matter.0 (4139) starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.matter, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:49.271 - info: tapo.0 (3983) Start first Update 2025-08-10 14:27:50.156 - info: tuya.0 (2169) bf71e05b81378d07fa4rr6: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.129:6668 2025-08-10 14:27:50.220 - info: tuya.0 (2169) bf479069f6c2e9dc05c9rw: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.113:6668 2025-08-10 14:28:03.276 - info: tuya.0 (2169) bfc58db9905282a732flco: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.137:6668 2025-08-10 14:28:03.505 - info: tuya.0 (2169) 707703542cf432a0bd9d: Error on Reconnect (7): connect ECONNREFUSED 192.168.178.120:6668 2025-08-10 14:28:04.940 - info: tuya.0 (2169) bf92e63d0ad13f956297jw: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.81:6668 2025-08-10 14:28:07.564 - info: tuya.0 (2169) bf454d38419e2166c9ig4k: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.80:6668sollte der user mit in die Gruppe admin ??
Und Vorsicht meine nextcloud läuft nach dem update nicht mehr
Die php version hat ein update auf 8.4 bekommen -
@benbensimpson2204 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
sollte der user mit in die Gruppe admin ??
Die Gruppe heißt
admund wenn der benjamin da in Admin-ähnlicher Funktion unterwegs ist, dann würde ich den auch da reinpacken. Spart dir ggfls. ein paar Kommandos, für die du sonst volle root-Rechte bräuchtest.Den Geräte-Link beim Zigbee würde ich auf
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400785-if00
setzen.iobroker.info würde ich deinstallieren, der wird nicht mehr gepflegt und wirft falsche Infos raus.
Und Vorsicht meine nextcloud läuft nach dem update nicht mehr
Das ist aber die Baustelle von nextcloud.
-
das wäre dann der Befehl zum hinzufügen ??
sudo usermod -aG adm benjaminbei zigbee sieht eb bei mir so aus
