[Gelöst] Keine Netzwerkverbindung zum iobroker mehr möglich
-
@homoran said in Keine Netzwerkverbindung zum iobroker mehr möglich:
Ich habe mir die Videoanleitung angeschaut
An das Video kommt man nur per Login dran
-
@homoran er hat doch geschrieben iobroker Master Kurs von Matthias
-
@wendy2702 wo?
hab ich nicht gefu den!
ich hatte schon eine Hai denangst, er hätte woanders zugeschnappt. -
@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
@homoran said in Keine Netzwerkverbindung zum iobroker mehr möglich:
wie hast du iobroker installiert?
Ich habe den ioBroker masterkurs von Matthias Kleine besucht, mir die Videos angeschaut und das nachgemacht.
-
@wendy2702 da hat wohl der Cache wieder zugeschlagen
-
curl -fsL https://iobroker.net/fix.sh | bash - -
@wendy2702 said in Keine Netzwerkverbindung zum iobroker mehr möglich:
curl -fsL https://iobroker.net/fix.sh | bash -
lief alles wunderbar durch
iobroker@iobroker:~ $ curl -fsL https://iobroker.net/fix.sh | bash - library: loaded Library version=2024-01-04 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== Hit:1 http://deb.debian.org/debian bullseye InRelease Get:2 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB] Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:6 https://repos.influxdata.com/debian bullseye InRelease Fetched 44.1 kB in 2s (29.3 kB/s) Reading package lists... Done ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== [sudo] password for iobroker: Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== iobroker@iobroker:~ $ -
habe iobroker start geklickt aber das Problem ist immer noch das selbe
-
@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
habe iobroker start geklickt aber das Problem ist immer noch das selbe
Geklickt?
Wo?
Ist das ne Windows Installation?
-
iob nodejs-update -
Sorry falsches wording
Getippt natürlich
ich habe jetzt auch nochmal das mit dem Nodejs-update probiert. Jetzt passiert auch was
-
habe ich jetzt gemacht
ioBroker nodejs updater 2023-10-13 Recommended nodejs-version is: 18.19.1 Checking your installation now. Please be patient! Your current setup is: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 We found these nodejs versions available for installation: nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Nothing to do - Your installation is using the correct paths. You are running nodejs v18.17.1. Do you want to install recommended version 18.19.1? Press <y> to continue or any other key to quit Trying to update your installation now. Please be patient. Waiting for ioBroker to shut down - Give me a minute... ############################################################ *** These repos are active on your system: Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Done *** Installing ca-certificates, curl and gnupg, just in case they are missing. (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../curl_7.74.0-1.3+deb11u11_arm64.deb ... Unpacking curl (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u9) ... Preparing to unpack .../libcurl4_7.74.0-1.3+deb11u11_arm64.deb ... Unpacking libcurl4:arm64 (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u9) ... Setting up libcurl4:arm64 (7.74.0-1.3+deb11u11) ... Setting up curl (7.74.0-1.3+deb11u11) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u7) ... *** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Package: nodejs Pin: origin deb.nodesource.com Pin-Priority: 1001 *** These repos are active after the adjustments: Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Get:5 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB] Hit:6 https://repos.influxdata.com/debian bullseye InRelease Get:7 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [7416 B] Get:8 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages [7392 B] Fetched 26.9 kB in 3s (9220 B/s) Reading package lists... Done Installing the recommended nodejs version now! Installing the recommended nodejs version! Extracting templates from packages: 100% Preconfiguring packages ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../base-files_11.1+deb11u9_arm64.deb ... Unpacking base-files (11.1+deb11u9) over (11.1+deb11u8) ... Setting up base-files (11.1+deb11u9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../libperl5.32_5.32.1-4+deb11u3_arm64.deb ... Unpacking libperl5.32:arm64 (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Preparing to unpack .../perl_5.32.1-4+deb11u3_arm64.deb ... Unpacking perl (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Preparing to unpack .../perl-base_5.32.1-4+deb11u3_arm64.deb ... Unpacking perl-base (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Setting up perl-base (5.32.1-4+deb11u3) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../perl-modules-5.32_5.32.1-4+deb11u3_all.deb ... Unpacking perl-modules-5.32 (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Preparing to unpack .../tar_1.34+dfsg-1+deb11u1_arm64.deb ... Unpacking tar (1.34+dfsg-1+deb11u1) over (1.34+dfsg-1) ... Setting up tar (1.34+dfsg-1+deb11u1) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../0-nftables_0.9.8-3.1+deb11u2_arm64.deb ... Unpacking nftables (0.9.8-3.1+deb11u2) over (0.9.8-3.1+deb11u1) ... Preparing to unpack .../1-libnftables1_0.9.8-3.1+deb11u2_arm64.deb ... Unpacking libnftables1:arm64 (0.9.8-3.1+deb11u2) over (0.9.8-3.1+deb11u1) ... Preparing to unpack .../2-libglib2.0-dev_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-dev:arm64 (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../3-libglib2.0-dev-bin_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-dev-bin (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../4-libglib2.0-data_2.66.8-1+deb11u1_all.deb ... Unpacking libglib2.0-data (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../5-libglib2.0-bin_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-bin (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../6-libglib2.0-0_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-0:arm64 (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../7-bluez_5.55-3.1+rpt2+deb11u1_arm64.deb ... Unpacking bluez (5.55-3.1+rpt2+deb11u1) over (5.55-3.1+rpt2) ... Preparing to unpack .../8-libssl1.1_1.1.1w-0+deb11u1+rpt1_arm64.deb ... Unpacking libssl1.1:arm64 (1.1.1w-0+deb11u1+rpt1) over (1.1.1w-0+deb11u1) ... Setting up libssl1.1:arm64 (1.1.1w-0+deb11u1+rpt1) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../openssh-sftp-server_1%3a8.4p1-5+deb11u3_arm64.deb ... Unpacking openssh-sftp-server (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../openssh-server_1%3a8.4p1-5+deb11u3_arm64.deb ... Unpacking openssh-server (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../openssh-client_1%3a8.4p1-5+deb11u3_arm64.deb ... Unpacking openssh-client (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../ssh_1%3a8.4p1-5+deb11u3_all.deb ... Unpacking ssh (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../libgnutls30_3.7.1-5+deb11u4_arm64.deb ... Unpacking libgnutls30:arm64 (3.7.1-5+deb11u4) over (3.7.1-5+deb11u3) ... Setting up libgnutls30:arm64 (3.7.1-5+deb11u4) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../00-tzdata_2024a-0+deb11u1_all.deb ... Unpacking tzdata (2024a-0+deb11u1) over (2021a-1+deb11u10) ... Preparing to unpack .../01-bind9-libs_1%3a9.16.48-1_arm64.deb ... Unpacking bind9-libs:arm64 (1:9.16.48-1) over (1:9.16.44-1~deb11u1) ... Preparing to unpack .../02-bind9-host_1%3a9.16.48-1_arm64.deb ... Unpacking bind9-host (1:9.16.48-1) over (1:9.16.44-1~deb11u1) ... Preparing to unpack .../03-bluez-firmware_1.2-4+rpt11_all.deb ... Unpacking bluez-firmware (1.2-4+rpt11) over (1.2-4+rpt10) ... Preparing to unpack .../04-cifs-utils_2%3a6.11-3.1+deb11u2_arm64.deb ... Unpacking cifs-utils (2:6.11-3.1+deb11u2) over (2:6.11-3.1+deb11u1) ... Preparing to unpack .../05-distro-info-data_0.51+deb11u5_all.deb ... Unpacking distro-info-data (0.51+deb11u5) over (0.51+deb11u4) ... Preparing to unpack .../06-firmware-atheros_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-atheros (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../07-firmware-brcm80211_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-brcm80211 (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../08-firmware-libertas_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-libertas (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../09-firmware-misc-nonfree_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-misc-nonfree (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../10-firmware-realtek_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-realtek (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../11-libbluetooth3_5.55-3.1+rpt2+deb11u1_arm64.deb ... Unpacking libbluetooth3:arm64 (5.55-3.1+rpt2+deb11u1) over (5.55-3.1+rpt2) ... Preparing to unpack .../12-libnghttp2-14_1.43.0-1+deb11u1_arm64.deb ... Unpacking libnghttp2-14:arm64 (1.43.0-1+deb11u1) over (1.43.0-1) ... Preparing to unpack .../13-libcurl3-gnutls_7.74.0-1.3+deb11u11_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u9) ... Preparing to unpack .../14-libtiff5_4.2.0-1+deb11u5_arm64.deb ... Unpacking libtiff5:arm64 (4.2.0-1+deb11u5) over (4.2.0-1+deb11u4) ... Preparing to unpack .../15-nodejs_18.19.1-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (18.19.1-1nodesource1) over (18.17.1-deb-1nodesource1) ... Preparing to unpack .../16-openssl_1.1.1w-0+deb11u1+rpt1_arm64.deb ... Unpacking openssl (1.1.1w-0+deb11u1+rpt1) over (1.1.1w-0+deb11u1) ... Preparing to unpack .../17-raspi-config_20231012~bullseye_all.deb ... Unpacking raspi-config (20231012~bullseye) over (20230214) ... Setting up bluez-firmware (1.2-4+rpt11) ... Setting up libnftables1:arm64 (0.9.8-3.1+deb11u2) ... Setting up nftables (0.9.8-3.1+deb11u2) ... Setting up bind9-libs:arm64 (1:9.16.48-1) ... Setting up libglib2.0-0:arm64 (2.66.8-1+deb11u1) ... No schema files found: doing nothing. Setting up distro-info-data (0.51+deb11u5) ... Setting up openssh-client (1:8.4p1-5+deb11u3) ... Setting up perl-modules-5.32 (5.32.1-4+deb11u3) ... Setting up firmware-atheros (1:20230210-5~bpo11+1+rpt2) ... Setting up cifs-utils (2:6.11-3.1+deb11u2) ... Setting up firmware-misc-nonfree (1:20230210-5~bpo11+1+rpt2) ... Setting up libnghttp2-14:arm64 (1.43.0-1+deb11u1) ... Setting up libcurl3-gnutls:arm64 (7.74.0-1.3+deb11u11) ... Setting up nodejs (18.19.1-1nodesource1) ... Setting up tzdata (2024a-0+deb11u1) ... Current default time zone: 'Europe/Berlin' Local time is now: Sun Feb 25 22:12:24 CET 2024. Universal Time is now: Sun Feb 25 21:12:24 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up bluez (5.55-3.1+rpt2+deb11u1) ... Installing new version of config file /etc/bluetooth/input.conf ... Setting up libglib2.0-data (2.66.8-1+deb11u1) ... Setting up firmware-brcm80211 (1:20230210-5~bpo11+1+rpt2) ... Setting up firmware-realtek (1:20230210-5~bpo11+1+rpt2) ... Setting up libperl5.32:arm64 (5.32.1-4+deb11u3) ... Setting up firmware-libertas (1:20230210-5~bpo11+1+rpt2) ... Setting up libbluetooth3:arm64 (5.55-3.1+rpt2+deb11u1) ... Setting up libtiff5:arm64 (4.2.0-1+deb11u5) ... Setting up bind9-host (1:9.16.48-1) ... Setting up openssl (1.1.1w-0+deb11u1+rpt1) ... Setting up raspi-config (20231012~bullseye) ... Setting up libglib2.0-dev-bin (2.66.8-1+deb11u1) ... Setting up openssh-sftp-server (1:8.4p1-5+deb11u3) ... Setting up openssh-server (1:8.4p1-5+deb11u3) ... rescue-ssh.target is a disabled or a static unit, not starting it. Setting up libglib2.0-bin (2.66.8-1+deb11u1) ... Setting up perl (5.32.1-4+deb11u3) ... Setting up libglib2.0-dev:arm64 (2.66.8-1+deb11u1) ... Setting up ssh (1:8.4p1-5+deb11u3) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for dbus (1.12.28-0+deb11u1) ... Processing triggers for mailcap (3.69) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u7) ... Processing triggers for initramfs-tools (0.140) ... We tried our best to update or fix your nodejs. Please run iob diag again to verify. *** RESTARTING ioBroker NOW! *** Please refresh or restart your browser in a few moments. -
-
@wendy2702 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
Geklickt?
Wo?@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
freedesktop
??
-
-
@homoran sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
@wendy2702 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
Geklickt?
Wo?@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
freedesktop
??
Deshalb war ich verwundert ob eventuell iob in einer Virtualisierung unter Win läuft
-
freedesktop ist mit dem dbus-Dienst verbandelt. Da läuft kein Desktop notwendigerweise.
-
ich habe jetzt so häufig iob diag eingegeben. Jetzt möchte ich es auch zeigen.
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 22:17:40 up 46 min, 1 user, load average: 0.42, 1.30, 1.01 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-02-25 22:17:40 CET Universal time: Sun 2024-02-25 21:17:40 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth gpio i2c spi *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.6G 889M 1.0M 1.3G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.6G 989M 3794 M total memory 1628 M used memory 1621 M active memory 1020 M inactive memory 889 M free memory 77 M buffer memory 1198 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * influxdb.service loaded failed failed InfluxDB is an open-source, distributed, time series database LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 6.4G 22G 23% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 25 21:31:11 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FB:C3:CA vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=8f761cd6-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 25 21:31:12 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Feb 25 21:31:12 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun Feb 25 21:31:14 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.0G /var/ 2.4G /var/log 801M /var/log/journal/54548f5b193440069d487fa9f59dd13a 801M /var/log/journal 355M /var/cache Archived and active journals take up 800.4M in the file system. /opt/iobroker/backups: 239M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 345M /opt/iobroker/iobroker-data/ 237M /opt/iobroker/iobroker-data/files 75M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 43M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 18M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.274a4d8d.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.1 : backitup : iobroker - enabled system.adapter.bydhvs.0 : bydhvs : iobroker - disabled + system.adapter.device-reminder.0 : device-reminder : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled system.adapter.feiertage.0 : feiertage : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fronius-solarweb.0 : fronius-solarweb : iobroker - enabled + system.adapter.fronius-wattpilot.1 : fronius-wattpilot : iobroker - enabled + system.adapter.fronius-wattpilot.2 : fronius-wattpilot : iobroker - enabled + system.adapter.fronius.0 : fronius : iobroker - enabled + system.adapter.fronius.1 : fronius : iobroker - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.meross.0 : meross : iobroker - enabled system.adapter.ping.0 : ping : iobroker - disabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.tado.0 : tado : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tesla-motors.0 : tesla-motors : iobroker - enabled + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.tibberlink.1 : tibberlink : iobroker - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.12.0 [Updatable] Adapter "alexa2" : 3.26.4 , installed 3.26.1 [Updatable] Adapter "backitup" : 2.10.11 , installed 2.8.7 [Updatable] Adapter "bydhvs" : 1.5.0 , installed 1.4.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.0.0 [Updatable] Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "fritzdect" : 2.5.9 , installed 2.3.1 [Updatable] Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "fronius-solarweb": 0.0.3 , installed 0.0.3 Adapter "fronius-wattpilot": 4.6.3, installed 4.6.2 [Updatable] Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.1.0 [Updatable] Adapter "influxdb" : 4.0.2 , installed 3.2.0 [Updatable] Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 7.1.4 [Updatable] Controller "js-controller": 5.0.19 , installed 5.0.12 [Updatable] Adapter "meross" : 1.17.0 , installed 1.15.1 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pvforecast" : 2.9.1 , installed 2.9.0 [Updatable] Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "tado" : 0.5.3 , installed 0.4.12 [Updatable] Adapter "telegram" : 3.0.1 , installed 2.0.1 [Updatable] Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.2 [Updatable] Adapter "tibberlink" : 2.2.1 , installed 1.5.0 [Updatable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.4.16 [Updatable] Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.3 , installed 6.1.10 [Updatable] Adapter "ws" : 2.5.10 , installed 2.5.8 [Updatable] Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.1 , installed 1.8.24 [Updatable] Objects and States Please stand by - This may take a while Objects: 17012 States: 14331 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:6 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 34749 12221/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 34355 11265/sshd: /usr/sb tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 37604 12069/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 36647 12069/iobroker.js-c tcp6 0 0 :::8082 :::* LISTEN 1000 37936 12305/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1000 35606 12094/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 34357 11265/sshd: /usr/sb udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14584 383/avahi-daemon: r udp 0 0 0.0.0.0:50776 0.0.0.0:* 108 14586 383/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13120 512/dhcpcd udp6 0 0 :::55930 :::* 108 14587 383/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14585 383/avahi-daemon: r udp6 0 0 :::546 :::* 0 14783 512/dhcpcd *** Log File - Last 25 Lines *** 2024-02-25 22:17:53.972 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:17:58.241 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:17:58.241 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:17:58.247 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:08.248 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:08.249 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:08.254 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:09.269 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:18.254 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:18.255 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:18.259 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:24.574 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:24.806 - info: shelly.0 (12221) [MQTT] Client Close: 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1) (false) 2024-02-25 22:18:26.995 - info: shelly.0 (12221) [MQTT] Device with client id "shellyplus1pm-64b7080975bc" connected! 2024-02-25 22:18:28.260 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:28.260 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:28.276 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:29.004 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:38.277 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:38.277 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:38.281 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:44.274 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:48.282 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:48.283 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:48.296 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086============ Mark until here for C&P =============
Hier die summery
======================= SUMMARY =======================
v.2023-10-10Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 21 Nodejs-Installation: /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.1 and npm 10.2.4 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 1.7G 791M 1.0M 1.3G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.7G 891M Active iob-Instances: 27 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: adminObjects: 17012
States: 14331Size of iob-Database:
26M /opt/iobroker/iobroker-data/objects.jsonl
7.9M /opt/iobroker/iobroker-data/states.jsonl=================== END OF SUMMARY ==================== -
Ich mache alles mit der Powershell
-
influxdb klemmt.
Und halt den ioBroker jetzt auf Stand.iob update iob upgrade iob stop iob upgrade self iob start
