Nach Update läuft nichts mehr!
-
@SaschaS
Weil die im Serverbetrieb nicht benötigt wird. Du geht doch eh per ssh in die Kiste rein. (Jedenfalls in der Regel).
Ist nur unnötiger Kram der da läuft und Ressourcen frisst. Du lässt einen Campingwagen ja auch nicht ganzjährig hinter dem Auto hängen.
Bei einem Raspi am besten mit 'sudo raspi-config' einstellen, dass die Kiste beim booten nur in die CLI / Eingabezeile bootet. -
bei mir wird angezeigt, dass nodejs 20.7.0 bereits installiert ist, aber wenn ich auf die weboberfläche gehe, wird mir noch v16.17.0 angezeigt...woran kann dies liegen?
pi@RaspberryPi4:/opt/iobroker $ sudo apt install nodejs Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig nodejs ist schon die neueste Version (20.7.0-1nodesource1). 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
diese Meldung bekomme ich halt jedesmal beim Entfernen von nodejs
Entfernen von nodejs (20.7.0-1nodesource1) ... dpkg: Warnung: Während Entfernens von nodejs ist Verzeichnis »/usr/lib/node_modules« nicht leer, wird daher nicht gelöscht Trigger für man-db (2.8.5-2) werden verarbeitet ... -
@speedyblade und was sagt
iob diag? -
@homoran sagte in Nach Update läuft nichts mehr!:
iob diag
nodejs: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs) Nodejs-Installation: /usr/bin/nodejs /usr/local/bin/node v16.17.0 /usr/local/bin/npm 8.15.0 /usr/local/bin/npx 8.15.0 Recommended versions are nodejs 18.x.y and npm 9.x.y *** nodejs is NOT correctly installed ***ich bin eigentlich genau nach der Anleitung vor gegangen:
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
iob diag
das ist nicht vollständig!
@speedyblade sagte in Nach Update läuft nichts mehr!:
ich bin eigentlich genau nach der Anleitung vor gegangen:
node und npm wird automatisch mit iobroker korrekt installiert
-
Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 07:59:33 up 9:49, 1 user, load average: 0.14, 0.35, 0.42 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=45.7'C volt=0.8700V *** Time and Time Zones *** Local time: Fri 2023-09-29 07:59:33 BST Universal time: Fri 2023-09-29 06:59:33 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 572M 6.4G 16M 856M 7.2G Swap: 99M 0B 99M Total: 7.9G 572M 6.5G 7846 M total memory 572 M used memory 387 M active memory 903 M inactive memory 6417 M free memory 134 M buffer memory 721 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 916G 3.4G 866G 1% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 17M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 785M 0 785M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Sep 28 22:09:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:D6:FD:D6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=206cf84d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Thu Sep 28 22:09:43 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Thu Sep 28 22:09:43 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Thu Sep 28 22:09:47 2023] EXT4-fs (sda2): re-mounted. Opts: (null) Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 367M /var/ 169M /var/cache 163M /var/cache/apt 104M /var/cache/apt/archives 93M /var/lib Archived and active journals take up 16.0M in the file system. /opt/iobroker/backups: 17M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 128M /opt/iobroker/iobroker-data/ 59M /opt/iobroker/iobroker-data/backup-objects 25M /opt/iobroker/iobroker-data/files 23M /opt/iobroker/iobroker-data/node-red/node_modules 23M /opt/iobroker/iobroker-data/node-red The five largest files in iobroker-data are: 9.3M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.2M /opt/iobroker/iobroker-data/files/knx.admin/static/js/main.fcc1088d.js.map 5.1M /opt/iobroker/iobroker-data/objects.json.migrated 5.1M /opt/iobroker/iobroker-data/objects.json.bak.migrated *** NodeJS-Installation *** nodejs: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs) /usr/bin/nodejs /usr/local/bin/node v16.17.0 /usr/local/bin/npm 8.15.0 /usr/local/bin/npx 8.15.0 nodejs: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs) *** nodejs is NOT correctly installed *** nodejs: Installed: 20.7.0-1nodesource1 Candidate: 20.7.0-1nodesource1 Version table: *** 20.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.6.1-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 127.0.0.1 States: jsonl on 127.0.0.1 Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : RaspberryPi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : RaspberryPi4 - enabled + system.adapter.discovery.0 : discovery : RaspberryPi4 - enabled + system.adapter.info.0 : info : RaspberryPi4 - enabled + system.adapter.knx.0 : knx : RaspberryPi4 - enabled, bind: 192.168.1.6 + system.adapter.mqtt.0 : mqtt : RaspberryPi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : RaspberryPi4 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.rpi2.0 : rpi2 : RaspberryPi4 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : RaspberryPi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : RaspberryPi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : RaspberryPi4 - enabled, port: 1880, bind: 0.0.0.0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "info" : 1.9.26 , installed 1.9.26 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "knx" : 2.0.22 , installed 2.0.22 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Objects and States Please stand by - This may take a while Objects: 1100 States: 745 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17012 615/sshd tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 214278 698/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 213731 780/io.mqtt.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 215157 638/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 215150 638/iobroker.js-con tcp6 0 0 :::80 :::* LISTEN 1001 214280 698/node-red tcp6 0 0 :::8081 :::* LISTEN 1001 213624 656/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 17014 615/sshd udp 0 0 192.168.1.6:55752 0.0.0.0:* 1001 216243 1010/io.knx.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15082 606/dhcpcd udp 0 0 0.0.0.0:54363 0.0.0.0:* 108 16606 383/avahi-daemon: r udp 0 0 192.168.1.6:53448 0.0.0.0:* 1001 217149 698/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16604 383/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 214281 698/node-red udp6 0 0 :::546 :::* 0 16674 606/dhcpcd udp6 0 0 :::5353 :::* 108 16605 383/avahi-daemon: r udp6 0 0 :::36145 :::* 108 16607 383/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-29 07:50:23.920 - info: host.RaspberryPi4 instance system.adapter.discovery.0 started with pid 795 2023-09-29 07:50:25.964 - info: discovery.0 (795) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-09-29 07:50:26.091 - info: discovery.0 (795) starting. Version 3.1.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v16.17.0, js-controller: 5.0.12 2023-09-29 07:50:27.962 - info: host.RaspberryPi4 instance system.adapter.info.0 started with pid 810 2023-09-29 07:50:31.416 - info: info.0 (810) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-09-29 07:50:31.928 - info: host.RaspberryPi4 instance system.adapter.backitup.0 started with pid 834 2023-09-29 07:50:32.131 - info: info.0 (810) starting. Version 1.9.26 in /opt/iobroker/node_modules/iobroker.info, node: v16.17.0, js-controller: 5.0.12 2023-09-29 07:50:32.328 - info: info.0 (810) Reading/updating systemdata. 2023-09-29 07:50:33.188 - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.speed" has to be type "string" but received type "number" 2023-09-29 07:50:33.306 - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l1d" has to be type "number" but received type "string" 2023-09-29 07:50:33.314 - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l1i" has to be type "number" but received type "string" 2023-09-29 07:50:33.322 - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l2" has to be type "number" but received type "string" 2023-09-29 07:50:33.330 - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l3" has to be type "number" but received type "string" 2023-09-29 07:50:33.637 - info: info.0 (810) cpu Temp res = {"main":46.738,"cores":[],"max":46.738,"socket":[],"chipset":null} 2023-09-29 07:50:34.786 - info: backitup.0 (834) starting. Version 2.8.1 in /opt/iobroker/node_modules/iobroker.backitup, node: v16.17.0, js-controller: 5.0.12 2023-09-29 07:50:34.961 - info: backitup.0 (834) [iobroker] backup will be activated at 03:10 every 5 day(s) 2023-09-29 07:50:35.959 - info: host.RaspberryPi4 instance system.adapter.knx.0 started with pid 1010 2023-09-29 07:50:39.621 - info: knx.0 (1010) starting. Version 2.0.22 in /opt/iobroker/node_modules/iobroker.knx, node: v16.17.0, js-controller: 5.0.12 2023-09-29 07:50:39.769 - warn: knx.0 (1010) No license found for knx. You can use 500DP for free or you can get a license on https://iobroker.net/accountLicenses ! 2023-09-29 07:50:39.774 - info: knx.0 (1010) Connecting to knx GW: 192.168.1.5:3674 with phy. Adr: 1.0.70 2023-09-29 07:52:47.734 - error: backitup.0 (834) Error: Command failed: sudo mount 192.168.1.3:/volume1/Backups/ioBroker /opt/iobroker/backups mount.nfs: Connection timed out 2023-09-29 07:53:22.489 - info: admin.0 (656) ==> Connected system.user.admin from ::ffff:192.168.1.5============ Mark until here for C&P =============
iob diag has finished.
-
@speedyblade versuch mal
https://forum.iobroker.net/post/1038493 -
Da sind gleich mehrere Kinken drin.
Zu nodejs: Versuch es mit dem Skript aus meiner Signatur.Da ist in der Vergangenheit mal eine nicht zur Distribution passende Version von nodejs von Hand reingedübelt worden. Und die nodejs@20 ist zu hoch.
Dann ist deine Systemzeit vermutlich falsch, es sei denn du hockst in England.
Und Buster muss in nächster Zeit auch angehoben werden. Ich würde dann gleich eine 64Bit-Variante vom Raspberry OS installieren.
-
perfekt....jetzt geht gar nichts mehr
Ps.: nein, sitze nicht in UK
Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 08:27:55 up 6 min, 1 user, load average: 0.21, 0.25, 0.11 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=47.2'C volt=0.8700V *** Time and Time Zones *** Local time: Fri 2023-09-29 08:27:55 BST Universal time: Fri 2023-09-29 07:27:55 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 55M 7.4G 16M 373M 7.5G Swap: 99M 0B 99M Total: 7.9G 55M 7.5G 7846 M total memory 55 M used memory 187 M active memory 180 M inactive memory 7416 M free memory 35 M buffer memory 338 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 916G 3.1G 866G 1% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 17M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 785M 0 785M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Sep 29 08:21:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:D6:FD:D6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=206cf84d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Sep 29 08:21:43 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Fri Sep 29 08:21:43 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Fri Sep 29 08:21:47 2023] EXT4-fs (sda2): re-mounted. Opts: (null) Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 368M /var/ 169M /var/cache 163M /var/cache/apt 104M /var/cache/apt/archives 93M /var/lib Archived and active journals take up 16.0M in the file system. /opt/iobroker/backups: 17M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 122M /opt/iobroker/iobroker-data/ 59M /opt/iobroker/iobroker-data/backup-objects 25M /opt/iobroker/iobroker-data/files 23M /opt/iobroker/iobroker-data/node-red/node_modules 23M /opt/iobroker/iobroker-data/node-red The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.2M /opt/iobroker/iobroker-data/files/knx.admin/static/js/main.fcc1088d.js.map 5.1M /opt/iobroker/iobroker-data/objects.json.migrated 5.1M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.5M /opt/iobroker/iobroker-data/objects.jsonl *** NodeJS-Installation *** /usr/bin/nodejs v18.18.0 /usr/bin/node v18.18.0 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 nodejs: Installed: 18.18.0-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.18.0-1nodesource1 100 100 /var/lib/dpkg/status 18.17.1-deb-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x buster/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 Core adapters versions node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 js-controller: node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 admin: node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 javascript: Adapters from github: 0 Adapter State node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 Enabled adapters with bindings node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 ioBroker-Repositories node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 Installed ioBroker-Instances node:internal/modules/cjs/loader:1080 throw err; ^ Error: Cannot find module 'tar' Require stack: - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js - /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) at Module._load (node:internal/modules/cjs/loader:922:27) at Module.require (node:internal/modules/cjs/loader:1143:19) at require (node:internal/modules/cjs/helpers:119:18) at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31) at Module._compile (node:internal/modules/cjs/loader:1256:14) at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) at Module.load (node:internal/modules/cjs/loader:1119:32) at Module._load (node:internal/modules/cjs/loader:960:12) at Module.require (node:internal/modules/cjs/loader:1143:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js', '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ] } Node.js v18.18.0 Objects and States Please stand by - This may take a while Objects: 0 States: 0 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_18.x buster InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16156 624/sshd tcp6 0 0 :::22 :::* LISTEN 0 16158 624/sshd udp 0 0 0.0.0.0:68 0.0.0.0:* 0 17451 615/dhcpcd udp 0 0 0.0.0.0:45185 0.0.0.0:* 108 15399 387/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15397 387/avahi-daemon: r udp6 0 0 :::43947 :::* 108 15400 387/avahi-daemon: r udp6 0 0 :::546 :::* 0 15573 615/dhcpcd udp6 0 0 :::5353 :::* 108 15398 387/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-29 08:20:45.300 - error: host.RaspberryPi4 Caught by controller[6]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.300 - error: host.RaspberryPi4 Caught by controller[7]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[8]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[9]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[10]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.301 - error: host.RaspberryPi4 Caught by controller[11]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.305 - error: host.RaspberryPi4 Caught by controller[12]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[13]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[14]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[15]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[16]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.306 - error: host.RaspberryPi4 Caught by controller[17]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[18]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[19]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[20]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.307 - error: host.RaspberryPi4 Caught by controller[21]: sh: 0: getcwd() failed: No such file or directory 2023-09-29 08:20:45.308 - info: host.RaspberryPi4 instance system.adapter.rpi2.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.309 - info: host.RaspberryPi4 instance system.adapter.info.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.408 - info: host.RaspberryPi4 instance system.adapter.admin.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.409 - info: host.RaspberryPi4 instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.470 - info: host.RaspberryPi4 instance system.adapter.knx.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.687 - info: host.RaspberryPi4 instance system.adapter.node-red.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.687 - info: host.RaspberryPi4 instance system.adapter.mqtt.0 terminated with code 0 (NO_ERROR) 2023-09-29 08:20:45.688 - info: host.RaspberryPi4 All instances are stopped. 2023-09-29 08:20:45.862 - info: host.RaspberryPi4 terminated============ Mark until here for C&P =============
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
Ps.: nein, sitze nicht in UK
Dann stell die Uhrzeit. Geht z. B. in
sudo raspi-config -
Und warum hast du es nicht mit meinem Skript gemacht?
Das hätte dir nämlich das richtige Repository eingespielt. -
was für einem Skript?
Wenn ich die Dinge nach Anleitung aufspiele und dann doch nicht funktionieren, muss ich einfach die Anleitungen hinterfragen.
Bei 5 Geräten funktioniert alles einwandfrei und dann auf einmal nicht mehr, das versteht kein Mensch -
@speedyblade sagte in Nach Update läuft nichts mehr!:
Wenn ich die Dinge nach Anleitung aufspiele und dann doch nicht funktionieren, muss ich einfach die Anleitungen hinterfragen.
Welche?
das versteht kein Mensch
Wenn da offenbar falsche Versionen über einen falschen Weg ins das System geprügelt werden muss man da gar nichts verstehen. Da ist einfach Murks gemacht worden.
was für einem Skript?
Das von @Homoran verlinkte und auch in meiner Signatur zu findende 'node-fix-Skript'.
-
ich bin eigentlich genau nach der Anleitung vor gegangen:
-
Für die v20 passte das ja auch. Die v16 hast du da mal schräg reingedonnert.
-
ioBroker nodejs fixer 2023-09-29 No recommendation for a nodejs version found on your system. We recommend to install latest version from nodejs v18 tree. Your current setup is: /usr/bin/nodejs v18.18.0 /usr/bin/node v18.18.0 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 We found these nodejs versions available for installation: nodejs: Installed: 18.18.0-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.18.0-1nodesource1 100 100 /var/lib/dpkg/status 18.17.1-deb-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x buster/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Nothing to do - Your installation is using the correct paths. You are running nodejs v18.18.0. Do you want to install recommended version from nodejs v.18 tree? Press <y> to continue or any other key to quit Trying to fix your installation now. Please be patient. rm: cannot remove '/etc/apt/keyrings/nodesource.gpg'$'\n''/usr/share/keyrings/nodesource.gpg': No such file or directory Waiting for ioBroker to shut down - Give me a minute... ############################################################ *** These repos are active on your system: Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Reading package lists... Done *** Installing ca-certificates, curl and gnupg, just in case they are missing. *** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Package: nodejs Pin: origin deb.nodesource.com Pin-Priority: 1001 *** These repos are active after the adjustments: Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Get:3 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB] Get:4 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [5267 B] Fetched 17.4 kB in 1s (15.7 kB/s) Reading package lists... Done Installing the recommended nodejs version now! Exact recommended version unknown, installing a fallback! Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be DOWNGRADED: nodejs 0 upgraded, 0 newly installed, 1 downgraded, 0 to remove and 0 not upgraded. Need to get 25.4 MB of archives. After this operation, 2314 kB disk space will be freed. Get:1 https://deb.nodesource.com/node_18.x nodistro/main armhf nodejs armhf 18.0.0-1nodesource1 [25.4 MB] Fetched 25.4 MB in 4s (6639 kB/s) dpkg: warning: downgrading nodejs from 18.18.0-1nodesource1 to 18.0.0-1nodesource1 (Reading database ... 53807 files and directories currently installed.) Preparing to unpack .../nodejs_18.0.0-1nodesource1_armhf.deb ... Detected old npm client, removing... Unpacking nodejs (18.0.0-1nodesource1) over (18.18.0-1nodesource1) ... Setting up nodejs (18.0.0-1nodesource1) ... Processing triggers for man-db (2.8.5-2) ... Updating fallback to latest nodejs v18 release (Reading database ... 53908 files and directories currently installed.) Preparing to unpack .../nodejs_18.18.0-1nodesource1_armhf.deb ... Detected old npm client, removing... Unpacking nodejs (18.18.0-1nodesource1) over (18.0.0-1nodesource1) ... Setting up nodejs (18.18.0-1nodesource1) ... Processing triggers for man-db (2.8.5-2) ... v18.18.0 has been installed! You are using the latest version now! Installing the recommended nodejs version and other updates now! We tried our best to fix your nodejs. Please run iob diag again to verify. *** RESTARTING ioBroker NOW! *** Please refresh or restart your browser in a few moments.pi@RaspberryPi4:~ $ sudo iobroker start pi@RaspberryPi4:~ $ iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh -bash: iob_diag:: Kommando nicht gefunden. -
Das Skript funktioniert und zaubert dir eine senkrechte Installation von nodejs 18 und Konsorten hin.
iob diagsagt nun?
-
@thomas-braun sagte in Nach Update läuft nichts mehr!:
. Die v16 hast du da mal schräg reingedonnert.
eigentlich soll die runter und v20 drauf
-
@speedyblade sagte in Nach Update läuft nichts mehr!:
eigentlich soll die runter und v20 drauf
Wozu?
Die ist zu neu und wird für ioBroker nicht empfohlen. -
