Weihnachtsangebot 2025! 🎄

[Thomas Braun]

@Homoran apt hat aber auch überhaupt keinen Bezug zu ioBroker. Das ist ja systemnah.

[Homoran]

@Thomas-Braun sagte in Nach Update läuft nichts mehr!:

@Homoran apt hat aber auch überhaupt keinen Bezug zu ioBroker. Das ist ja systemnah.

auch korrekt, aber es geht doch gerade um die Befehle, die dort in der verlinkten Doku stehen

[SaschaS]

@Thomas-Braun said in Nach Update läuft nichts mehr!:

@SaschaS sagte in Nach Update läuft nichts mehr!:

Habe ich halt noch ne grafische Ausgabe dazu.

Die man ausschalten kann (und sollte) für den Serverbetrieb.

Wieso sollte man die ausschalten? Und weiter: Geht das einfach? Kann man bestimmt Googlen wie das geht.

[Thomas Braun]

@SaschaS
Weil die im Serverbetrieb nicht benötigt wird. Du geht doch eh per ssh in die Kiste rein. (Jedenfalls in der Regel).
Ist nur unnötiger Kram der da läuft und Ressourcen frisst. Du lässt einen Campingwagen ja auch nicht ganzjährig hinter dem Auto hängen.
Bei einem Raspi am besten mit 'sudo raspi-config' einstellen, dass die Kiste beim booten nur in die CLI / Eingabezeile bootet.

[SpeedyBlade]

@thomas-braun

bei mir wird angezeigt, dass nodejs 20.7.0 bereits installiert ist, aber wenn ich auf die weboberfläche gehe, wird mir noch v16.17.0 angezeigt...woran kann dies liegen?

pi@RaspberryPi4:/opt/iobroker $ sudo apt install nodejs
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
nodejs ist schon die neueste Version (20.7.0-1nodesource1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

diese Meldung bekomme ich halt jedesmal beim Entfernen von nodejs

Entfernen von nodejs (20.7.0-1nodesource1) ...
dpkg: Warnung: Während Entfernens von nodejs ist Verzeichnis »/usr/lib/node_modules« nicht leer, wird daher nicht gelöscht
Trigger für man-db (2.8.5-2) werden verarbeitet ...

[Homoran]

@speedyblade und was sagt iob diag?

[SpeedyBlade]

@homoran sagte in Nach Update läuft nichts mehr!:

iob diag

nodejs: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs)
Nodejs-Installation:    /usr/bin/nodejs
                        /usr/local/bin/node             v16.17.0
                        /usr/local/bin/npm              8.15.0
                        /usr/local/bin/npx              8.15.0

Recommended versions are nodejs 18.x.y and npm 9.x.y
*** nodejs is NOT correctly installed ***

ich bin eigentlich genau nach der Anleitung vor gegangen:

https://github.com/nodesource/distributions#nodejs

[Homoran]

@speedyblade sagte in Nach Update läuft nichts mehr!:

iob diag

das ist nicht vollständig!

@speedyblade sagte in Nach Update läuft nichts mehr!:

ich bin eigentlich genau nach der Anleitung vor gegangen:

node und npm wird automatisch mit iobroker korrekt installiert

[SpeedyBlade]

  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 07:59:33 up  9:49,  1 user,  load average: 0.14, 0.35, 0.42
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=45.7'C
volt=0.8700V

*** Time and Time Zones ***
               Local time: Fri 2023-09-29 07:59:33 BST
           Universal time: Fri 2023-09-29 06:59:33 UTC
                 RTC time: n/a
                Time zone: Europe/London (BST, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.8G        572M        6.4G         16M        856M        7.2G
Swap:           99M          0B         99M
Total:         7.9G        572M        6.5G

         7846 M total memory
          572 M used memory
          387 M active memory
          903 M inactive memory
         6417 M free memory
          134 M buffer memory
          721 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      916G  3.4G  866G   1% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G   17M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     785M     0  785M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Sep 28 22:09:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:D6:FD:D6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=206cf84d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Thu Sep 28 22:09:43 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Sep 28 22:09:43 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Thu Sep 28 22:09:47 2023] EXT4-fs (sda2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET        SOURCE    FSTYPE OPTIONS
/             /dev/sda2 ext4   rw,noatime,stripe=8191
|-/sys/fs/bpf none      bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
367M    /var/
169M    /var/cache
163M    /var/cache/apt
104M    /var/cache/apt/archives
93M     /var/lib

Archived and active journals take up 16.0M in the file system.

/opt/iobroker/backups:
17M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
128M    /opt/iobroker/iobroker-data/
59M     /opt/iobroker/iobroker-data/backup-objects
25M     /opt/iobroker/iobroker-data/files
23M     /opt/iobroker/iobroker-data/node-red/node_modules
23M     /opt/iobroker/iobroker-data/node-red

The five largest files in iobroker-data are:
9.3M    /opt/iobroker/iobroker-data/objects.jsonl
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
5.2M    /opt/iobroker/iobroker-data/files/knx.admin/static/js/main.fcc1088d.js.map
5.1M    /opt/iobroker/iobroker-data/objects.json.migrated
5.1M    /opt/iobroker/iobroker-data/objects.json.bak.migrated

*** NodeJS-Installation ***

nodejs: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs)
/usr/bin/nodejs
/usr/local/bin/node             v16.17.0
/usr/local/bin/npm              8.15.0
/usr/local/bin/npx              8.15.0
nodejs: /lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs)
*** nodejs is NOT correctly installed ***

nodejs:
  Installed: 20.7.0-1nodesource1
  Candidate: 20.7.0-1nodesource1
  Version table:
 *** 20.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.6.1-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree: 0

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

No configuration change needed.


Multihost discovery server: disabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    jsonl on 127.0.0.1
States:                     jsonl on 127.0.0.1

Core adapters versions
js-controller:  5.0.12
admin:          6.10.1
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : RaspberryPi4                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : RaspberryPi4                             -  enabled
+ system.adapter.discovery.0              : discovery             : RaspberryPi4                             -  enabled
+ system.adapter.info.0                   : info                  : RaspberryPi4                             -  enabled
+ system.adapter.knx.0                    : knx                   : RaspberryPi4                             -  enabled, bind: 192.168.1.6
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi4                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : RaspberryPi4                             -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.rpi2.0                   : rpi2                  : RaspberryPi4                             -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : RaspberryPi4                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi4                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : RaspberryPi4                             -  enabled, port: 1880, bind: 0.0.0.0

ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 6.10.1   , installed 6.10.1
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "knx"          : 2.0.22   , installed 2.0.22
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "node-red"     : 4.0.3    , installed 4.0.3
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2

Objects and States
Please stand by - This may take a while
Objects:        1100
States:         745

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          17012      615/sshd
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       214278     698/node-red
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       213731     780/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       215157     638/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       215150     638/iobroker.js-con
tcp6       0      0 :::80                   :::*                    LISTEN      1001       214280     698/node-red
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       213624     656/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          17014      615/sshd
udp        0      0 192.168.1.6:55752       0.0.0.0:*                           1001       216243     1010/io.knx.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15082      606/dhcpcd
udp        0      0 0.0.0.0:54363           0.0.0.0:*                           108        16606      383/avahi-daemon: r
udp        0      0 192.168.1.6:53448       0.0.0.0:*                           1001       217149     698/node-red
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        16604      383/avahi-daemon: r
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       214281     698/node-red
udp6       0      0 :::546                  :::*                                0          16674      606/dhcpcd
udp6       0      0 :::5353                 :::*                                108        16605      383/avahi-daemon: r
udp6       0      0 :::36145                :::*                                108        16607      383/avahi-daemon: r

*** Log File - Last 25 Lines ***


2023-09-29 07:50:23.920  - info: host.RaspberryPi4 instance system.adapter.discovery.0 started with pid 795
2023-09-29 07:50:25.964  - info: discovery.0 (795) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-09-29 07:50:26.091  - info: discovery.0 (795) starting. Version 3.1.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v16.17.0, js-controller: 5.0.12
2023-09-29 07:50:27.962  - info: host.RaspberryPi4 instance system.adapter.info.0 started with pid 810
2023-09-29 07:50:31.416  - info: info.0 (810) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-09-29 07:50:31.928  - info: host.RaspberryPi4 instance system.adapter.backitup.0 started with pid 834
2023-09-29 07:50:32.131  - info: info.0 (810) starting. Version 1.9.26 in /opt/iobroker/node_modules/iobroker.info, node: v16.17.0, js-controller: 5.0.12
2023-09-29 07:50:32.328  - info: info.0 (810) Reading/updating systemdata.
2023-09-29 07:50:33.188  - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.speed" has to be type "string" but received type "number"
2023-09-29 07:50:33.306  - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l1d" has to be type "number" but received type "string"
2023-09-29 07:50:33.314  - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l1i" has to be type "number" but received type "string"
2023-09-29 07:50:33.322  - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l2" has to be type "number" but received type "string"
2023-09-29 07:50:33.330  - info: info.0 (810) State value to set for "info.0.sysinfo.cpu.info.cache-l3" has to be type "number" but received type "string"
2023-09-29 07:50:33.637  - info: info.0 (810) cpu Temp res = {"main":46.738,"cores":[],"max":46.738,"socket":[],"chipset":null}
2023-09-29 07:50:34.786  - info: backitup.0 (834) starting. Version 2.8.1 in /opt/iobroker/node_modules/iobroker.backitup, node: v16.17.0, js-controller: 5.0.12
2023-09-29 07:50:34.961  - info: backitup.0 (834) [iobroker] backup will be activated at 03:10 every 5 day(s)
2023-09-29 07:50:35.959  - info: host.RaspberryPi4 instance system.adapter.knx.0 started with pid 1010
2023-09-29 07:50:39.621  - info: knx.0 (1010) starting. Version 2.0.22 in /opt/iobroker/node_modules/iobroker.knx, node: v16.17.0, js-controller: 5.0.12
2023-09-29 07:50:39.769  - warn: knx.0 (1010) No license found for knx. You can use 500DP for free or you can get a license on https://iobroker.net/accountLicenses !
2023-09-29 07:50:39.774  - info: knx.0 (1010) Connecting to knx GW: 192.168.1.5:3674 with phy. Adr: 1.0.70
2023-09-29 07:52:47.734  - error: backitup.0 (834) Error: Command failed: sudo mount 192.168.1.3:/volume1/Backups/ioBroker /opt/iobroker/backups
mount.nfs: Connection timed out

2023-09-29 07:53:22.489  - info: admin.0 (656) ==> Connected system.user.admin from ::ffff:192.168.1.5

============ Mark until here for C&P =============

iob diag has finished.

[Homoran]

@speedyblade versuch mal
https://forum.iobroker.net/post/1038493

[Thomas Braun]

@speedyblade

Da sind gleich mehrere Kinken drin.
Zu nodejs: Versuch es mit dem Skript aus meiner Signatur.

Da ist in der Vergangenheit mal eine nicht zur Distribution passende Version von nodejs von Hand reingedübelt worden. Und die nodejs@20 ist zu hoch.

Dann ist deine Systemzeit vermutlich falsch, es sei denn du hockst in England.

Und Buster muss in nächster Zeit auch angehoben werden. Ich würde dann gleich eine 64Bit-Variante vom Raspberry OS installieren.

[SpeedyBlade]

perfekt....jetzt geht gar nichts mehr :persevere:

Ps.: nein, sitze nicht in UK

  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 08:27:55 up 6 min,  1 user,  load average: 0.21, 0.25, 0.11
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=47.2'C
volt=0.8700V

*** Time and Time Zones ***
               Local time: Fri 2023-09-29 08:27:55 BST
           Universal time: Fri 2023-09-29 07:27:55 UTC
                 RTC time: n/a
                Time zone: Europe/London (BST, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.8G         55M        7.4G         16M        373M        7.5G
Swap:           99M          0B         99M
Total:         7.9G         55M        7.5G

         7846 M total memory
           55 M used memory
          187 M active memory
          180 M inactive memory
         7416 M free memory
           35 M buffer memory
          338 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      916G  3.1G  866G   1% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G   17M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     785M     0  785M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Sep 29 08:21:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:D6:FD:D6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=206cf84d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Fri Sep 29 08:21:43 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Sep 29 08:21:43 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Fri Sep 29 08:21:47 2023] EXT4-fs (sda2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET        SOURCE    FSTYPE OPTIONS
/             /dev/sda2 ext4   rw,noatime,stripe=8191
|-/sys/fs/bpf none      bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
368M    /var/
169M    /var/cache
163M    /var/cache/apt
104M    /var/cache/apt/archives
93M     /var/lib

Archived and active journals take up 16.0M in the file system.

/opt/iobroker/backups:
17M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
122M    /opt/iobroker/iobroker-data/
59M     /opt/iobroker/iobroker-data/backup-objects
25M     /opt/iobroker/iobroker-data/files
23M     /opt/iobroker/iobroker-data/node-red/node_modules
23M     /opt/iobroker/iobroker-data/node-red

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
5.2M    /opt/iobroker/iobroker-data/files/knx.admin/static/js/main.fcc1088d.js.map
5.1M    /opt/iobroker/iobroker-data/objects.json.migrated
5.1M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
4.5M    /opt/iobroker/iobroker-data/objects.jsonl

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.0
/usr/bin/node           v18.18.0
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1


nodejs:
  Installed: 18.18.0-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.18.0-1nodesource1 100
        100 /var/lib/dpkg/status
     18.17.1-deb-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x buster/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree: 0

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0

node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0

Core adapters versions
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0
js-controller:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0
admin:
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0
javascript:

Adapters from github:   0

Adapter State
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0

Enabled adapters with bindings
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0

ioBroker-Repositories
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0

Installed ioBroker-Instances
node:internal/modules/cjs/loader:1080
  throw err;
  ^

Error: Cannot find module 'tar'
Require stack:
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js
- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js
- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
    at Module._load (node:internal/modules/cjs/loader:922:27)
    at Module.require (node:internal/modules/cjs/loader:1143:19)
    at require (node:internal/modules/cjs/helpers:119:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js:12:31)
    at Module._compile (node:internal/modules/cjs/loader:1256:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
    at Module.load (node:internal/modules/cjs/loader:1119:32)
    at Module._load (node:internal/modules/cjs/loader:960:12)
    at Module.require (node:internal/modules/cjs/loader:1143:19) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/lib/setup/setupBackup.js',
    '/opt/iobroker/node_modules/@iobroker/js-controller-cli/build/index.js',
    '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
  ]
}

Node.js v18.18.0

Objects and States
Please stand by - This may take a while
Objects:        0
States:         0

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 https://deb.nodesource.com/node_18.x buster InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          16156      624/sshd
tcp6       0      0 :::22                   :::*                    LISTEN      0          16158      624/sshd
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          17451      615/dhcpcd
udp        0      0 0.0.0.0:45185           0.0.0.0:*                           108        15399      387/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        15397      387/avahi-daemon: r
udp6       0      0 :::43947                :::*                                108        15400      387/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          15573      615/dhcpcd
udp6       0      0 :::5353                 :::*                                108        15398      387/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-09-29 08:20:45.300  - error: host.RaspberryPi4 Caught by controller[6]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.300  - error: host.RaspberryPi4 Caught by controller[7]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.301  - error: host.RaspberryPi4 Caught by controller[8]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.301  - error: host.RaspberryPi4 Caught by controller[9]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.301  - error: host.RaspberryPi4 Caught by controller[10]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.301  - error: host.RaspberryPi4 Caught by controller[11]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.305  - error: host.RaspberryPi4 Caught by controller[12]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.306  - error: host.RaspberryPi4 Caught by controller[13]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.306  - error: host.RaspberryPi4 Caught by controller[14]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.306  - error: host.RaspberryPi4 Caught by controller[15]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.306  - error: host.RaspberryPi4 Caught by controller[16]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.306  - error: host.RaspberryPi4 Caught by controller[17]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.307  - error: host.RaspberryPi4 Caught by controller[18]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.307  - error: host.RaspberryPi4 Caught by controller[19]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.307  - error: host.RaspberryPi4 Caught by controller[20]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.307  - error: host.RaspberryPi4 Caught by controller[21]: sh: 0: getcwd() failed: No such file or directory
2023-09-29 08:20:45.308  - info: host.RaspberryPi4 instance system.adapter.rpi2.0 terminated with code 0 (NO_ERROR)
2023-09-29 08:20:45.309  - info: host.RaspberryPi4 instance system.adapter.info.0 terminated with code 0 (NO_ERROR)
2023-09-29 08:20:45.408  - info: host.RaspberryPi4 instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2023-09-29 08:20:45.409  - info: host.RaspberryPi4 instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR)
2023-09-29 08:20:45.470  - info: host.RaspberryPi4 instance system.adapter.knx.0 terminated with code 0 (NO_ERROR)
2023-09-29 08:20:45.687  - info: host.RaspberryPi4 instance system.adapter.node-red.0 terminated with code 0 (NO_ERROR)
2023-09-29 08:20:45.687  - info: host.RaspberryPi4 instance system.adapter.mqtt.0 terminated with code 0 (NO_ERROR)
2023-09-29 08:20:45.688  - info: host.RaspberryPi4 All instances are stopped.
2023-09-29 08:20:45.862  - info: host.RaspberryPi4 terminated

============ Mark until here for C&P =============

[Thomas Braun]

@speedyblade sagte in Nach Update läuft nichts mehr!:

Ps.: nein, sitze nicht in UK

Dann stell die Uhrzeit. Geht z. B. in

sudo raspi-config

[Thomas Braun]

@speedyblade

Und warum hast du es nicht mit meinem Skript gemacht?
Das hätte dir nämlich das richtige Repository eingespielt.

[SpeedyBlade]

@thomas-braun

was für einem Skript?
Wenn ich die Dinge nach Anleitung aufspiele und dann doch nicht funktionieren, muss ich einfach die Anleitungen hinterfragen.
Bei 5 Geräten funktioniert alles einwandfrei und dann auf einmal nicht mehr, das versteht kein Mensch

[Thomas Braun]

@speedyblade sagte in Nach Update läuft nichts mehr!:

Wenn ich die Dinge nach Anleitung aufspiele und dann doch nicht funktionieren, muss ich einfach die Anleitungen hinterfragen.

Welche?

das versteht kein Mensch

Wenn da offenbar falsche Versionen über einen falschen Weg ins das System geprügelt werden muss man da gar nichts verstehen. Da ist einfach Murks gemacht worden.

was für einem Skript?

Das von @Homoran verlinkte und auch in meiner Signatur zu findende 'node-fix-Skript'.

[SpeedyBlade]

@thomas-braun

ich bin eigentlich genau nach der Anleitung vor gegangen:

https://github.com/nodesource/distributions#nodejs

[Thomas Braun]

@speedyblade

Für die v20 passte das ja auch. Die v16 hast du da mal schräg reingedonnert.

[SpeedyBlade]

@thomas-braun

ioBroker nodejs fixer 2023-09-29
No recommendation for a nodejs version found on your system. We recommend to install latest version from nodejs v18 tree.

Your current setup is:
/usr/bin/nodejs         v18.18.0
/usr/bin/node           v18.18.0
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0

We found these nodejs versions available for installation:

nodejs:
  Installed: 18.18.0-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.18.0-1nodesource1 100
        100 /var/lib/dpkg/status
     18.17.1-deb-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x buster/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages



Nothing to do - Your installation is using the correct paths.

You are running nodejs v18.18.0. Do you want to install recommended version from nodejs v.18 tree?

Press <y> to continue or any other key to quit
Trying to fix your installation now. Please be patient.
rm: cannot remove '/etc/apt/keyrings/nodesource.gpg'$'\n''/usr/share/keyrings/nodesource.gpg': No such file or directory
Waiting for ioBroker to shut down - Give me a minute...
############################################################

*** These repos are active on your system:
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Reading package lists... Done

*** Installing ca-certificates, curl and gnupg, just in case they are missing.

*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source

deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001

*** These repos are active after the adjustments:
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB]
Get:4 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [5267 B]
Fetched 17.4 kB in 1s (15.7 kB/s)
Reading package lists... Done

Installing the recommended nodejs version now!

Exact recommended version unknown, installing a fallback!
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be DOWNGRADED:
  nodejs
0 upgraded, 0 newly installed, 1 downgraded, 0 to remove and 0 not upgraded.
Need to get 25.4 MB of archives.
After this operation, 2314 kB disk space will be freed.
Get:1 https://deb.nodesource.com/node_18.x nodistro/main armhf nodejs armhf 18.0.0-1nodesource1 [25.4 MB]
Fetched 25.4 MB in 4s (6639 kB/s)
dpkg: warning: downgrading nodejs from 18.18.0-1nodesource1 to 18.0.0-1nodesource1
(Reading database ... 53807 files and directories currently installed.)
Preparing to unpack .../nodejs_18.0.0-1nodesource1_armhf.deb ...
Detected old npm client, removing...
Unpacking nodejs (18.0.0-1nodesource1) over (18.18.0-1nodesource1) ...
Setting up nodejs (18.0.0-1nodesource1) ...
Processing triggers for man-db (2.8.5-2) ...

Updating fallback to latest nodejs v18 release
(Reading database ... 53908 files and directories currently installed.)
Preparing to unpack .../nodejs_18.18.0-1nodesource1_armhf.deb ...
Detected old npm client, removing...
Unpacking nodejs (18.18.0-1nodesource1) over (18.0.0-1nodesource1) ...
Setting up nodejs (18.18.0-1nodesource1) ...
Processing triggers for man-db (2.8.5-2) ...
v18.18.0 has been installed! You are using the latest version now!
Installing the recommended nodejs version and other updates now!

We tried our best to fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.

pi@RaspberryPi4:~ $ sudo iobroker start
pi@RaspberryPi4:~ $ iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh
-bash: iob_diag:: Kommando nicht gefunden.

[Thomas Braun]

@speedyblade

Das Skript funktioniert und zaubert dir eine senkrechte Installation von nodejs 18 und Konsorten hin.

iob diag

sagt nun?