Wartung am 15.11. – Forum ab 22:00 Uhr nicht erreichbar

[bouster]

@djmarc75
ok, also das hat schonmal funktioniert. Jetzt läuft es mit dem Befehl
Da ich etwas paranoid bin (evtl auch gerade weil ich mich nicht so gut auskenne) habe ich den Teil der IP adressen entfernt, wenn der auch nötig ist würde ich ihn lieber nicht ganz so öffentlich teilen.
Ich hoffe hiermit lässt sich arbeiten.

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.5
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 15:26:29 up 20:50,  3 users,  load average: 2.51, 1.95, 1.15
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=43.3'C
volt=0.8900V

*** Time and Time Zones ***
               Local time: Wed 2023-05-17 15:26:29 CEST
           Universal time: Wed 2023-05-17 13:26:29 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
xxxxx
/home/xxxxx
xxxxx adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin docker gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.3G        246M         40M        2.2G        2.5G
Swap:            99M          0B         99M
Total:          3.9G        1.3G        346M

         3794 M total memory
         1349 M used memory
         1887 M active memory
          796 M inactive memory
          246 M free memory
          303 M buffer memory
         1895 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   19G  9.3G  67% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  2.7M  757M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/loop0     squashfs   47M   47M     0 100% /snap/core18/2723
/dev/loop2     squashfs  225M  225M     0 100% /snap/nextcloud/21522
/dev/loop1     squashfs   47M   47M     0 100% /snap/core18/2748
/dev/loop3     squashfs   44M   44M     0 100% /snap/snapd/18936
/dev/loop4     squashfs   44M   44M     0 100% /snap/snapd/19124
/dev/mmcblk0p1 vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M   36K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:

Show mounted filesystems (real ones only):
TARGET                  SOURCE         FSTYPE   OPTIONS
/                       /dev/mmcblk0p2 ext4     rw,noatime
|-/snap/core18/2723     /dev/loop0     squashfs ro,nodev,relatime,errors=continue
|-/snap/nextcloud/21522 /dev/loop2     squashfs ro,nodev,relatime,errors=continue
|-/snap/core18/2748     /dev/loop1     squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/18936     /dev/loop3     squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/19124     /dev/loop4     squashfs ro,nodev,relatime,errors=continue
`-/boot                 /dev/mmcblk0p1 vfat     rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
8.4G    /var/
6.9G    /var/lib
4.7G    /var/lib/docker/overlay2
4.7G    /var/lib/docker
1.9G    /var/lib/snapd

Archived and active journals take up 136.0M in the file system.

/opt/iobroker/backups:
710M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
273M    /opt/iobroker/iobroker-data/
128M    /opt/iobroker/iobroker-data/files
118M    /opt/iobroker/iobroker-data/backup-objects
51M     /opt/iobroker/iobroker-data/files/javascript.admin
38M     /opt/iobroker/iobroker-data/files/scenes.admin/static/js

The five largest files in iobroker-data are:
8.9M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map
8.7M    /opt/iobroker/iobroker-data/objects.jsonl
7.5M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.2afdfa2c.chunk.js.map
7.1M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.21829349.chunk.js.map
7.0M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.5d4fbf6a.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v14.21.3
/usr/bin/node           v14.21.3
/usr/bin/npm            6.14.18
/usr/bin/npx            6.14.18


nodejs:
  Installed: 14.21.3-deb-1nodesource1
  Candidate: 14.21.3-deb-1nodesource1
  Version table:
 *** 14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.23
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.heos.0                   : heos                  : raspberrypi                              - disabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: xxxx
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.javascript.1             : javascript            : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: xxxx, bind: 192.xxx.xxx.xxx
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.signal-cmb.0             : signal-cmb            : raspberrypi                              -  enabled
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: xxxx, bind: 192.xxx.xxx.xxx(SSL), run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0
  system.adapter.spotify-premium.0        : spotify-premium       : raspberrypi                              - disabled
  system.adapter.upnp.0                   : upnp                  : raspberrypi                              - disabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_2ce58c1eff92eb11b66e214f3d98b6d1-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: xxxx
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: xxxx, bind: 192.xxx.xxx.xxx
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: xxxx, bind: 192.xxx.xxx.xxx(SSL), run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_2ce58c1eff92eb11b66e214f3d98b6d1-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "broadlink2"   : 2.1.5    , installed 2.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "heos"         : 1.10.0   , installed 1.10.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "mqtt"         : 4.0.7    , installed 2.7.4  [Updatable]
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "signal-cmb"   : 0.3.0    , installed 0.3.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonoff"       : 2.5.1    , installed 2.5.1
Adapter    "spotify-premium": 1.2.1  , installed 1.2.1
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        5151
States:         3396

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 https://deb.nodesource.com/node_14.x buster InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 https://download.docker.com/linux/raspbian bullseye InRelease
Reading package lists...
Pending Updates: 3

*** Listening Ports ***
Active Internet connections (only servers)

xxx

*** Log File - Last 25 Lines ***

2023-05-17 15:25:55.948  - info: info.0 (8811) Reading/updating systemdata.
2023-05-17 15:25:57.044  - info: info.0 (8811) State value to set for "info.0.sysinfo.cpu.info.speed" has to be type "string" but received type "number"
2023-05-17 15:25:57.201  - info: info.0 (8811) State value to set for "info.0.sysinfo.cpu.info.cache-l3" has to be type "number" but received type "string"
2023-05-17 15:25:57.421  - info: info.0 (8811) cpu Temp res = {"main":45.764,"cores":[],"max":45.764,"socket":[],"chipset":null}
2023-05-17 15:25:59.584  - info: host.raspberrypi instance system.adapter.simple-api.0 started with pid 9066
2023-05-17 15:25:59.658  - info: web.0 (8850) starting. Version 4.3.0 in /opt/iobroker/node_modules/iobroker.web, node: v14.21.3, js-controller: 4.0.23
2023-05-17 15:26:00.277  - info: web.0 (8850) Secure socket.io server listening on port 8082
2023-05-17 15:26:00.309  - info: web.0 (8850) https server listening on port 8082
2023-05-17 15:26:01.923  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x0017880109409518 LWA009
2023-05-17 15:26:02.100  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x001788010c3c16d7 929003046301_03
2023-05-17 15:26:02.700  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x0017880108d9874f LWA009
2023-05-17 15:26:02.934  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x001788010c429b4b 929003046301_02
2023-05-17 15:26:03.586  - info: host.raspberrypi instance system.adapter.backitup.0 started with pid 9141
2023-05-17 15:26:03.915  - info: simple-api.0 (9066) starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v14.21.3, js-controller: 4.0.23
2023-05-17 15:26:04.063  - info: simple-api.0 (9066) Secure simpleAPI server listening on port 8087
2023-05-17 15:26:04.064  - info: simple-api.0 (9066) Allow states only when user is owner: false
2023-05-17 15:26:04.093  - info: simple-api.0 (9066) https server listening on port 8087
2023-05-17 15:26:06.590  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x0017880109898696 440400982841
2023-05-17 15:26:06.912  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x7cb03eaa0a0061c9 LIGHTIFY Indoor Flex RGBW
2023-05-17 15:26:07.009  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x7cb03eaa0a0091da LIGHTIFY Indoor Flex RGBW
2023-05-17 15:26:07.373  - info: backitup.0 (9141) starting. Version 2.6.19 in /opt/iobroker/node_modules/iobroker.backitup, node: v14.21.3, js-controller: 4.0.23
2023-05-17 15:26:07.407  - warn: zigbee.0 (8546) DeviceAvailability:Failed to ping 0x00178801098986f7 440400982841
2023-05-17 15:26:07.539  - info: host.raspberrypi instance system.adapter.signal-cmb.0 started with pid 9461
2023-05-17 15:26:07.596  - info: backitup.0 (9141) [iobroker] backup will be activated at 02:40 every 1 day(s)
2023-05-17 15:26:10.877  - info: signal-cmb.0 (9461) starting. Version 0.3.0 in /opt/iobroker/node_modules/iobroker.signal-cmb, node: v14.21.3, js-controller: 4.0.23

[withstu]

@bouster Du könntest das Logging Level der Heos Instanz mal von Info auf Debug oder Silly ändern und schauen, was der Adapter so ausgibt. Ich habe bei mir übrigens die empfohlene Node Version 18 und npm 9 laufen. Vielleicht hilft bei dir bereits ein Update.

[bouster]

@withstu Das komische ist, dass es bis vor ca 2 Monaten problemlos funktioniert hat und von einem auf den anderen Tag nicht mehr. Das Update muss ich dann wohl mal angehen...

[bouster]

@withstu ich habe nun alle geupdated. Raspbian von Buster auf Bullseye. Node auf 18 und npm auf 9. Dann ging der Adapter für ca. 10 min. Dann habe ich das Skript gestartet und kurz darauf läuft es nicht mehr. Skript wieder aus HEOS adapter neu starten hilft nicht. Beides verbindet wieder nicht mehr...

[DJMarc75]

@bouster Ausgabe von

iob diag

nochmal bitte

[bouster]

@djmarc75 said in [Vorlage] Denon HEOS Script:

iob diag

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.5
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 20:16:29 up 58 min,  3 users,  load average: 6.77, 2.36, 1.62
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=40.4'C
volt=0.8900V

*** Time and Time Zones ***
               Local time: Sun 2023-05-21 20:16:29 CEST
           Universal time: Sun 2023-05-21 18:16:29 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin docker gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.2G        707M         40M        1.9G        2.5G
Swap:            99M          0B         99M
Total:          3.9G        1.2G        807M

         3794 M total memory
         1200 M used memory
         1853 M active memory
          646 M inactive memory
          707 M free memory
          245 M buffer memory
         1640 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   22G  6.7G  76% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  2.7M  757M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/loop0     squashfs   47M   47M     0 100% /snap/core18/2748
/dev/loop1     squashfs   47M   47M     0 100% /snap/core18/2723
/dev/loop2     squashfs  225M  225M     0 100% /snap/nextcloud/21522
/dev/loop3     squashfs   44M   44M     0 100% /snap/snapd/18936
/dev/loop4     squashfs   44M   44M     0 100% /snap/snapd/19124
/dev/mmcblk0p1 vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M   36K  380M   1% /run/user/1000
/dev/mmcblk0p3 ext4       88G   24K   84G   1% /media/pi/b6462cb4-edb3-a74c-b924-794fd764376a

Messages concerning ext4 filesystem in dmesg:

Show mounted filesystems (real ones only):
TARGET                                                SOURCE         FSTYPE   OPTIONS
/                                                     /dev/mmcblk0p2 ext4     rw,noatime
|-/snap/core18/2748                                   /dev/loop0     squashfs ro,nodev,relatime,errors=continue
|-/snap/core18/2723                                   /dev/loop1     squashfs ro,nodev,relatime,errors=continue
|-/snap/nextcloud/21522                               /dev/loop2     squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/18936                                   /dev/loop3     squashfs ro,nodev,relatime,errors=continue
|-/snap/snapd/19124                                   /dev/loop4     squashfs ro,nodev,relatime,errors=continue
|-/boot                                               /dev/mmcblk0p1 vfat     rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro
`-/media/pi/b6462cb4-edb3-a74c-b924-794fd764376a /dev/mmcblk0p3 ext4     rw,nosuid,nodev,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
11G     /var/
6.9G    /var/lib
4.8G    /var/lib/docker
4.7G    /var/lib/docker/overlay2
3.8G    /var/log

Archived and active journals take up 1.7G in the file system.

/opt/iobroker/backups:
737M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
275M    /opt/iobroker/iobroker-data/
128M    /opt/iobroker/iobroker-data/files
119M    /opt/iobroker/iobroker-data/backup-objects
51M     /opt/iobroker/iobroker-data/files/javascript.admin
38M     /opt/iobroker/iobroker-data/files/scenes.admin/static/js

The five largest files in iobroker-data are:
9.1M    /opt/iobroker/iobroker-data/objects.jsonl
8.9M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map
7.5M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.2afdfa2c.chunk.js.map
7.1M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.21829349.chunk.js.map
7.0M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.5d4fbf6a.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.heos.0                   : heos                  : raspberrypi                              - disabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.javascript.1             : javascript            : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1886, bind: 192.168.178.101
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.signal-cmb.0             : signal-cmb            : raspberrypi                              -  enabled
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 192.168.178.101 (SSL), run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1885, bind: 0.0.0.0
  system.adapter.spotify-premium.0        : spotify-premium       : raspberrypi                              - disabled
  system.adapter.upnp.0                   : upnp                  : raspberrypi                              - disabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1886, bind: 192.168.178.101
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 192.168.178.101 (SSL), run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "broadlink2"   : 2.1.5    , installed 2.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "heos"         : 1.10.0   , installed 1.10.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "signal-cmb"   : 0.3.0    , installed 0.3.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonoff"       : 2.5.1    , installed 2.5.1
Adapter    "spotify-premium": 1.2.1  , installed 1.2.1
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        5151
States:         3385

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:4 https://download.docker.com/linux/raspbian bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)

xxx

*** Log File - Last 25 Lines ***

2023-05-21 20:09:38.649  - info: host.raspberrypi object deleted system.adapter.heos.1
2023-05-21 20:09:38.653  - info: host.raspberrypi iobroker host.raspberrypi Deleting 22 state(s).
2023-05-21 20:09:39.753  - info: host.raspberrypi iobroker exit 0
2023-05-21 20:09:41.703  - info: admin.0 (22943) ==> Connected system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:10:16.793  - info: admin.0 (22943) <== Disconnect system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:10:33.806  - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:11:33.780  - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:12:33.774  - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:13:21.759  - info: admin.0 (22943) ==> Connected system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:13:29.605  - info: admin.0 (22943) <== Disconnect system.user.admin from ::ffff:192.168.178.84
2023-05-21 20:13:33.772  - error: rpi2.0 (345) GPIO is not initialized!
2023-05-21 20:14:15.071  - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:23.164  - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:31.254  - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:31.272  - warn: heos.0 (3089) rebooting player 192.168.178.23
2023-05-21 20:14:37.186  - info: heos.0 (3089) searching for HEOS devices ...
2023-05-21 20:14:46.836  - info: host.raspberrypi "system.adapter.heos.0" disabled
2023-05-21 20:14:46.839  - info: host.raspberrypi stopInstance system.adapter.heos.0 (force=false, process=true)
2023-05-21 20:14:46.851  - info: heos.0 (3089) Got terminate signal TERMINATE_YOURSELF
2023-05-21 20:14:46.852  - info: heos.0 (3089) disconnecting from HEOS ...
2023-05-21 20:14:46.855  - info: heos.0 (3089) disconnected from HEOS
2023-05-21 20:14:46.857  - info: heos.0 (3089) terminating
2023-05-21 20:14:46.859  - info: heos.0 (3089) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-05-21 20:14:46.933  - info: host.raspberrypi stopInstance system.adapter.heos.0 send kill signal
2023-05-21 20:14:47.456  - info: host.raspberrypi instance system.adapter.heos.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

[withstu]

@bouster welches Script startest du denn? Der Adapter ist aus dem Script aus diesem Forumseintrag entstanden. Wenn du dieses Script und den Adapter startest, hast du es doppelt laufen. Stelle das Logging Level des Adapters auf Debug und packe die Ausgabe mal hier rein.

[Thomas Braun]

@bouster sagte in [Vorlage] Denon HEOS Script:

Da ich etwas paranoid bin (evtl auch gerade weil ich mich nicht so gut auskenne) habe ich den Teil der IP adressen entfernt, wenn der auch nötig ist würde ich ihn lieber nicht ganz so öffentlich teilen.

Das sind alles lokale IP-Adressen, damit kann niemand was von außen kommend anfangen.
Im iob diag steht ggf. nur in den 25 Zeilen aus dem iobroker log was sensibles drin. Da sollte man nochmal drüber schauen. Aber IPs aus deinem lokalen Netzwerk sind vollkommen uninteressant für 'Hacker'.

[bouster]

@withstu Da kommt leider nichts nützliches bei raus... Das folgende spukt er beim Log-Level "silly" aus: und danach geht es immer mit "searching ..." weiter. Kein anderer output.

heos.0
	14832	2023-05-31 16:51:14.263	debug	searching for HEOS devices ...
heos.0
	14832	2023-05-31 16:50:44.248	info	searching for HEOS devices ...
heos.0
	14832	2023-05-31 16:50:44.044	info	starting. Version 1.10.0 in /opt/iobroker/node_modules/iobroker.heos, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
		2023-05-31 16:50:40.075	info	instance system.adapter.heos.0 started with pid 14832

[withstu]

@bouster Dann findet der Adapter die Player nicht mehr mit dem Protokoll SSDP. Prüfe mal, ob Netzwerkseitig alles passt: https://github.com/withstu/ioBroker.heos#network-requirements

Alternativ könntest du die statische IP eines Players in die Adapter Konfiguration als bevorzugten IP hinzufügen.

[bouster]

@withstu Hallo nochmal. Ich habe den Adapter jetzt eine weitere Nacht laufen lassen und etwas mehr output bekommen:

heos.0
	14832	2023-06-01 06:58:30.112	info	searching for HEOS devices ...
heos.0
	14832	2023-06-01 06:58:25.111	debug	disconnected from HEOS
heos.0
	14832	2023-06-01 06:58:25.109	debug	data sent: heos://system/register_for_change_events?enable=off
heos.0
	14832	2023-06-01 06:58:25.109	debug	[HEARTBEAT] reset retries
heos.0
	14832	2023-06-01 06:58:25.109	debug	[HEARTBEAT] stop interval
heos.0
	14832	2023-06-01 06:58:25.109	debug	disconnecting from HEOS ...
heos.0
	14832	2023-06-01 06:58:25.109	debug	reconnecting to HEOS ...
heos.0
	14832	2023-06-01 06:58:25.108	debug	leader failure statistics: {"192.168.178.28":94,"192.168.178.23":94}
heos.0
	14832	2023-06-01 06:58:25.108	debug	[connect] Error: connect EHOSTUNREACH 192.168.178.28:1255
heos.0
	14832	2023-06-01 06:58:22.050	info	searching for HEOS devices ...
heos.0
	14832	2023-06-01 06:58:22.050	debug	connecting to HEOS (192.168.178.28) ...
heos.0
	14832	2023-06-01 06:58:22.050	debug	try to connect to 192.168.178.28 to reboot device
heos.0
	14832	2023-06-01 06:58:22.049	debug	following ips need to be rebooted: 192.168.178.28
heos.0
	14832	2023-06-01 06:58:17.048	debug	disconnected from HEOS
heos.0
	14832	2023-06-01 06:58:17.046	debug	data sent: heos://system/register_for_change_events?enable=off
heos.0
	14832	2023-06-01 06:58:17.045	debug	[HEARTBEAT] reset retries
heos.0
	14832	2023-06-01 06:58:17.045	debug	[HEARTBEAT] stop interval
heos.0
	14832	2023-06-01 06:58:17.045	debug	disconnecting from HEOS ...
heos.0
	14832	2023-06-01 06:58:17.045	debug	reconnecting to HEOS ...
heos.0
	14832	2023-06-01 06:58:17.045	debug	leader failure statistics: {"192.168.178.28":93,"192.168.178.23":94}
heos.0
	14832	2023-06-01 06:58:17.044	debug	[connect] Error: connect EHOSTUNREACH 192.168.178.23:1255
heos.0
	14832	2023-06-01 06:58:13.971	info	searching for HEOS devices ...
heos.0
	14832	2023-06-01 06:58:13.970	debug	connecting to HEOS (192.168.178.23) ...
heos.0
	14832	2023-06-01 06:58:13.970	debug	try to connect to 192.168.178.23 to reboot device
heos.0
	14832	2023-06-01 06:58:13.970	debug	following ips need to be rebooted: 192.168.178.23,192.168.178.28
heos.0
	14832	2023-06-01 06:58:08.968	debug	disconnected from HEOS
heos.0
	14832	2023-06-01 06:58:08.966	debug	[HEARTBEAT] reset retries
heos.0
	14832	2023-06-01 06:58:08.966	debug	[HEARTBEAT] stop interval
heos.0
	14832	2023-06-01 06:58:08.966	debug	disconnecting from HEOS ...
heos.0
	14832	2023-06-01 06:58:08.965	debug	reconnecting to HEOS ...
heos.0
	14832	2023-06-01 06:58:07.964	debug	add reboot ip 192.168.178.28
heos.0
	14832	2023-06-01 06:58:07.964	debug	add reboot ip 192.168.178.23
heos.0
	14832	2023-06-01 06:58:07.964	debug	rebooting all players
heos.0
	14832	2023-06-01 06:58:07.963	debug	can't find any HEOS devices. Try to connect known device IPs and reboot them to exclude device failure...
heos.0
	14832	2023-06-01 06:57:37.961	debug	searching for HEOS devices ...

[withstu]

@bouster Der Adapter kann keine Verbindung zu Port 1255 des Players aufbauen (EHOSTUNREACH 192.168.178.28:1255). Hast du mal versucht die Player kurz vom Strom zu nehmen?

[bouster]

@withstu Beide player 192.168.178.28:1255 und 192.168.178.23:1255 werden regelmäßig vom Netz genommen und nur bei bedarf gestartet.

Was (soweit mein Verständnis reicht) merkwürdig ist, ist dass er die Player neustarten kann. Dann muss er den Player doch auch finden.

[withstu]

@bouster nicht ganz. Der Adapter versucht die Player zu rebooten, kann sich aber nicht verbinden. Wenn der Adapter keinen Player über SSDP finden kann, versucht er sich nacheinander mit allen bereits bekannten IPs aus den Player States direkt zu verbinden und die Player neu zu starten. So wird versucht mögliche SSDP Fehler durch Reboot der Player zu beheben.

[bouster]

@withstu Da das leider alles nicht geholfen hat. Frage ich mich auf welche Weise kommen sich denn das Skript und der Adapter in die Quere? Könnte da das Problem liegen, dass ich beides mal ausgeführt habe?

[bouster]

Hallo,
ich habe es final endlich hinbekommen und der Adapter läuft jetzt. Ich weiß nicht was anders ist als vorher. Es hat nun ohne andere Änderungen funktioniert den Adapter zu verbinden, jedoch nur mit direkter IP Eingabe der Player.

[hg6806]

Hi, ich bin gerade hier auf den Thread gestoßen und möchte auch die Browser Funktion umsetzen.
Das hat soweit geklappt, jedoch habe ich nicht die beiden Zeile "Overview" und "Back". Wie bekommt man die?

[withstu]

@hg6806 Hast du dir bereits das Script in der Readme angeschaut? https://github.com/withstu/ioBroker.heos?tab=readme-ov-file#browse-sources

[hg6806]

@withstu

Ja sicher, daher habe ich es ja und implementiert. Ich kann ja auch durch die Favoriten browsen.

Jedoch fehlen mir eben diese zwei Zeilen. Und somit komme ich nicht zurück

[hg6806]

Auf einmal klappt es.
Hatte vorher schon mal den Adapter neu gestartet. Die beiden Zeichen oben rechts waren immer ausgegraut.
Nun werde ich mal weiter experimentieren.
Danke für den Adapter und das Script!