vedirekt Adapter Verbindungsproblem

Homoran

@laser sagte in vedirekt Adapter Verbindungsproblem:

@homoran im Info- Modus kommen keine Meldungsketten, weder Werte noch Typenfehler. Im Debug- Modus kommen beide Meldungstypen. Pausenlos

auch das ist seltsam

Die Typmeldungen sind Info!

@laser sagte in vedirekt Adapter Verbindungsproblem:

2023-05-04 12:58:37.673 info State value to set for "vedirect.0.LOAD" has to be type "boolean" but received type
bei den Werten passt es, das schrieb ich ja bereits mehrfach

@homoran sagte in vedirekt Adapter Verbindungsproblem:

das was du da zeigst, ist das "ankommen" von neuen Werten.
Jeweils mit Bezeichnung des zugehörigen Datenpunktes.
diese Informationen kommen auch nur im debug-Modus

Homoran

@laser sagte in vedirekt Adapter Verbindungsproblem:

Es gibt bei mir kein by-id mehr.

ist jetzt nicht wahr!

dann hätten wir uns alles sparen können!

@homoran sagte in vedirekt Adapter Verbindungsproblem:

@laser sagte in vedirekt Adapter Verbindungsproblem:

eigenartigerweise finde ich die Adapter seit einiger Zeit (?) nicht mehr über "by-id"

pssst das?
https://forum.iobroker.net/topic/65017/warnung-vor-linux-update-udev-stable-247-3-7-deb11u2/66

Laser

@homoran Ich beschwere mich ja nicht über die Typmeldungen. Ich hätte erwartet, daß, wenn der Adapter gestoppt ist, keine Meldungen mehr kommen.

Den o.g. Beitrag habe ich mir schon angesehen. Aber das Fachchinesisch darin nicht verstanden!

Homoran

@laser sagte in vedirekt Adapter Verbindungsproblem:

Ich hätte erwartet, daß, wenn der Adapter gestoppt ist, keine Meldungen mehr kommen.

ich auch!

Jetzt suche ich schon sooo lange nach der Ursache, nachher ist es gar nicht der Adapter sondern deine Installation!

was sagt iob diag?

Homoran

nicht dauernd in alten Beiträgen etwas hinzufügen!

@laser sagte in vedirekt Adapter Verbindungsproblem:

Den o.g. Beitrag habe ich mir schon angesehen. Aber das Fachchinesisch darin nicht verstanden!

nein, du meintest, das würde auf dich nicht zutreffen
@laser sagte in vedirekt Adapter Verbindungsproblem:

Der USB Port ist ja bei mir nicht tot. Es funktioniert ja,

ein aktuelles update in linux hat einen bug

Laser

@homoran USB funktioniert nur zeitweise nicht? Ich habe ja über einige Zeit Werte, die ich auch logge. Bisher habe ich mir damit geholfen, den Adapter jede Stunde neu zu starten. Ist keine Dauerlösung.
Reicht die "summary"? Den Rest kann ich nicht mehr kopieren.

======================= SUMMARY =======================
                     v.2023-04-16


Operatingsystem:        Debian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.16.0
                        /usr/bin/node           v18.16.0
                        /usr/bin/npm            9.5.1
                        /usr/bin/npx            9.5.1

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.7G        1.1G        1.0M        919M        2.0G
Swap:            99M          0B         99M
Total:          3.9G        1.7G        1.2G

Active iob-Instances:   23
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.1                  : admin                 : raspberrypiIO64                          -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypiIO64                          -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                5675
States:                 5142

Size of iob-Database:

33M     /opt/iobroker/iobroker-data/objects.jsonl
5.2M    /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

Homoran

@laser sagte in vedirekt Adapter Verbindungsproblem:

Den Rest kann ich nicht mehr kopieren.

dann starte diag nochmal

Laser

@homoran mal sehen, ob das was wird...

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 400 Rev 1.1
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 18:20:10 up  1:31,  1 user,  load average: 0.58, 0.85, 0.84
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=40.4'C
volt=0.9360V

*** Time and Time Zones ***
               Local time: Thu 2023-05-04 18:20:10 CEST
           Universal time: Thu 2023-05-04 16:20:10 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
otto
/home/otto
otto adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.8G        1.1G        1.0M        921M        1.9G
Swap:            99M          0B         99M
Total:          3.9G        1.8G        1.2G

         3793 M total memory
         1787 M used memory
         2042 M active memory
          518 M inactive memory
         1083 M free memory
           87 M buffer memory
          834 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      110G  5.2G  101G   5% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  1.1M  758M   1% /run
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu May  4 16:48:24 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:0F:ED:4A vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=34877f34-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu May  4 16:48:27 2023] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[Thu May  4 16:48:27 2023] EXT4-fs (sda2): write access will be enabled during recovery
[Thu May  4 16:48:28 2023] EXT4-fs (sda2): orphan cleanup on readonly fs
[Thu May  4 16:48:28 2023] EXT4-fs (sda2): 1 orphan inode deleted
[Thu May  4 16:48:28 2023] EXT4-fs (sda2): recovery complete
[Thu May  4 16:48:28 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Thu May  4 16:48:28 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Thu May  4 16:48:30 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.1G    /var/
405M    /var/log
360M    /var/cache
355M    /var/cache/apt
345M    /var/log/journal/007bdc1de22f4392961e44836db9bdcf

Archived and active journals take up 344.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
796M    /opt/iobroker/iobroker-data/history
147M    /opt/iobroker/iobroker-data/files
68M     /opt/iobroker/iobroker-data/backup-objects
51M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/objects.jsonl
9.1M    /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/2.3d2d025f.chunk.js.map
6.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   3

Adapter State
+ system.adapter.admin.1                  : admin                 : raspberrypiIO64                          -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspberrypiIO64                          - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypiIO64                          -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypiIO64                          -  enabled
+ system.adapter.echarts.0                : echarts               : raspberrypiIO64                          -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypiIO64                          - disabled
+ system.adapter.history.0                : history               : raspberrypiIO64                          -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypiIO64                          -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : raspberrypiIO64                          -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypiIO64                          -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypiIO64                          -  enabled
+ system.adapter.modbus.0                 : modbus                : raspberrypiIO64                          -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypiIO64                          -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : raspberrypiIO64                          -  enabled
+ system.adapter.opendtu.0                : opendtu               : raspberrypiIO64                          -  enabled
+ system.adapter.owfs.0                   : owfs                  : raspberrypiIO64                          -  enabled, port: 4304
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypiIO64                          -  enabled
+ system.adapter.shelly.1                 : shelly                : raspberrypiIO64                          -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypiIO64                          -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypiIO64                          -  enabled
+ system.adapter.vedirect.0               : vedirect              : raspberrypiIO64                          -  enabled
  system.adapter.vis-bars.0               : vis-bars              : raspberrypiIO64                          -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypiIO64                          -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypiIO64                          -  enabled
+ system.adapter.web.0                    : web                   : raspberrypiIO64                          -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.zigbee.0                 : zigbee                : raspberrypiIO64                          - disabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : raspberrypiIO64                          -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : raspberrypiIO64                          -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypiIO64                          -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.owfs.0                   : owfs                  : raspberrypiIO64                          -  enabled, port: 4304
+ system.adapter.shelly.1                 : shelly                : raspberrypiIO64                          -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypiIO64                          -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypiIO64                          -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "owfs"         : 0.7.0    , installed 0.7.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-hqwidgets": 1.3.0    , installed 1.3.0
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        5675
States:         5142

*** OS-Repositories and Updates ***
W: GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: The repository 'https://repos.influxdata.com/debian bullseye InRelease' is not signed.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       16707      1298/io.mqtt.0
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       12139      868/iobroker.js-con
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       13121      868/iobroker.js-con
tcp        0      0 192.168.2.54:2001       0.0.0.0:*               LISTEN      1001       15732      1240/io.hm-rpc.1
tcp        0      0 192.168.2.54:2010       0.0.0.0:*               LISTEN      1001       17534      1226/io.hm-rpc.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12972      578/sshd: /usr/sbin
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       19169      2135/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15537      1092/io.admin.1
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       18684      1675/io.simple-api.
tcp6       0      0 :::8086                 :::*                    LISTEN      999        12104      709/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      111        13154      867/grafana
tcp6       0      0 :::22                   :::*                    LISTEN      0          12974      578/sshd: /usr/sbin
udp        0      0 0.0.0.0:49615           0.0.0.0:*                           108        14575      413/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14573      413/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       16844      1531/io.shelly.1
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14051      706/dhcpcd
udp6       0      0 :::546                  :::*                                0          12997      706/dhcpcd
udp6       0      0 :::40016                :::*                                108        14576      413/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        14574      413/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-05-04 18:20:50.571  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:50.659  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:50.844  - warn: shelly.1 (1531) [authEnabled] 192.168.2.12 (shellyswitch25 / shellyswitch25-3C6105E462D5 / SHSW-25#3C6105E462D5#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:52.045  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:55.665  - warn: shelly.1 (1531) [authEnabled] 192.168.2.56 (shellyem / shellyem-244CAB419A03 / SHEM#244CAB419A03#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:55.751  - warn: shelly.1 (1531) [authEnabled] 192.168.2.9 (shellyswitch25 / shellyswitch25-3C6105E3A7AF / SHSW-25#3C6105E3A7AF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:55.991  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:55.997  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:56.216  - warn: shelly.1 (1531) [authEnabled] 192.168.2.12 (shellyswitch25 / shellyswitch25-3C6105E462D5 / SHSW-25#3C6105E462D5#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:20:57.313  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:00.811  - warn: shelly.1 (1531) [authEnabled] 192.168.2.56 (shellyem / shellyem-244CAB419A03 / SHEM#244CAB419A03#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:01.092  - warn: shelly.1 (1531) [authEnabled] 192.168.2.9 (shellyswitch25 / shellyswitch25-3C6105E3A7AF / SHSW-25#3C6105E3A7AF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:01.411  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:01.464  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:01.536  - warn: shelly.1 (1531) [authEnabled] 192.168.2.12 (shellyswitch25 / shellyswitch25-3C6105E462D5 / SHSW-25#3C6105E462D5#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:02.591  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:03.445  - info: javascript.0 (1172) script.js.Heizung.GPIO-IOTag: IstTag: true
2023-05-04 18:21:03.445  - info: javascript.0 (1172) script.js.Heizung.GPIO-IOTag: istNacht: false
2023-05-04 18:21:03.446  - info: javascript.0 (1172) script.js.Heizung.GPIO-IOTag: DPNacht IO: true
2023-05-04 18:21:03.446  - info: javascript.0 (1172) script.js.Heizung.GPIO-IOTag: change GP23
2023-05-04 18:21:05.914  - warn: shelly.1 (1531) [authEnabled] 192.168.2.56 (shellyem / shellyem-244CAB419A03 / SHEM#244CAB419A03#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:06.275  - warn: shelly.1 (1531) [authEnabled] 192.168.2.9 (shellyswitch25 / shellyswitch25-3C6105E3A7AF / SHSW-25#3C6105E3A7AF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:06.743  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:06.779  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-04 18:21:07.971  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)



============ Mark until here for C&P =============

iob diag has finished.

Homoran

@laser aah, du hast nochmal editiert!

Ich bin kein Linux Crack, aber folgendes fällt mit auf

@laser sagte in vedirekt Adapter Verbindungsproblem:

[Thu May 4 16:48:28 2023] EXT4-fs (sda2): 1 orphan inode deleted

Dein Dateisystem hat einen Schuss.

@laser sagte in vedirekt Adapter Verbindungsproblem:

The repository 'https://repos.influxdata.com/debian bullseye InRelease' is not signed.

ist kein ioBroker Thema, aber deine influxdb ist nicht sauber installiert

läuft die auch noch auf dem Pi?

Laser

@homoran Die Influx 2.7 DB läuft auf dem PI. Habe ich neu installiert. Ist aber für mich absolutes Neuland.
Repostery ist nicht signiert. Jetzt habe ich zig Anleitungen gelesen. Vermutlich nie die "Richtige". Stand in irgendeiner, das kann man ignorieren. Muß aber nicht richtig sein.
Werde dieses Repostery löschen.
Werte werden in die DB geschrieben, kann sie auch mit grafana auslesen.


======== Start marking the full check here =========


Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 400 Rev 1.1
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 11:16:51 up 18:28,  1 user,  load average: 0.52, 0.67, 0.78
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=39.9'C
volt=0.9360V

*** Time and Time Zones ***
               Local time: Fri 2023-05-05 11:16:52 CEST
           Universal time: Fri 2023-05-05 09:16:52 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
otto
/home/otto
otto adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.0G        723M        1.0M        1.1G        1.7G
Swap:            99M          0B         99M
Total:          3.9G        2.0G        823M

         3793 M total memory
         1988 M used memory
         2247 M active memory
          649 M inactive memory
          723 M free memory
           90 M buffer memory
          991 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem            Type      Size  Used Avail Use% Mounted on
/dev/root             ext4      110G  5.2G  101G   5% /
devtmpfs              devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs                 tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs                 tmpfs     759M  1.1M  758M   1% /run
tmpfs                 tmpfs     5.0M     0  5.0M   0% /run/lock
/dev/sda1             vfat      255M   31M  225M  13% /boot
//192.168.2.57/backup cifs       95G   12G   83G  13% /opt/iobroker/backups
tmpfs                 tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:

Show mounted filesystems (real ones only):
TARGET                  SOURCE                FSTYPE OPTIONS
/                       /dev/sda2             ext4   rw,noatime
|-/boot                 /dev/sda1             vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/opt/iobroker/backups //192.168.2.57/backup cifs   rw,relatime,vers=3.0,cache=strict,username=iobroker,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.2.57,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=5

Files in neuralgic directories:

/var:
1.1G    /var/
418M    /var/log
361M    /var/cache
355M    /var/cache/apt
353M    /var/log/journal/007bdc1de22f4392961e44836db9bdcf

Archived and active journals take up 352.0M in the file system.

/opt/iobroker/backups:
368M    /opt/iobroker/backups/
88K     /opt/iobroker/backups/otto
20K     /opt/iobroker/backups/guest
4.0K    /opt/iobroker/backups/otto/.config/htop
4.0K    /opt/iobroker/backups/otto/.config

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
800M    /opt/iobroker/iobroker-data/history
147M    /opt/iobroker/iobroker-data/files
68M     /opt/iobroker/iobroker-data/backup-objects
51M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
12M     /opt/iobroker/iobroker-data/objects.jsonl
9.1M    /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/2.3d2d025f.chunk.js.map
8.4M    /opt/iobroker/iobroker-data/states.jsonl

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   3

Adapter State
+ system.adapter.admin.1                  : admin                 : raspberrypiIO64                          -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspberrypiIO64                          - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypiIO64                          -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypiIO64                          -  enabled
+ system.adapter.echarts.0                : echarts               : raspberrypiIO64                          -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypiIO64                          - disabled
+ system.adapter.history.0                : history               : raspberrypiIO64                          -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypiIO64                          -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : raspberrypiIO64                          -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypiIO64                          -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypiIO64                          -  enabled
+ system.adapter.modbus.0                 : modbus                : raspberrypiIO64                          -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypiIO64                          -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : raspberrypiIO64                          -  enabled
+ system.adapter.opendtu.0                : opendtu               : raspberrypiIO64                          -  enabled
+ system.adapter.owfs.0                   : owfs                  : raspberrypiIO64                          -  enabled, port: 4304
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypiIO64                          -  enabled
+ system.adapter.shelly.1                 : shelly                : raspberrypiIO64                          -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypiIO64                          -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypiIO64                          -  enabled
+ system.adapter.vedirect.0               : vedirect              : raspberrypiIO64                          -  enabled
  system.adapter.vis-bars.0               : vis-bars              : raspberrypiIO64                          -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypiIO64                          -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypiIO64                          -  enabled
+ system.adapter.web.0                    : web                   : raspberrypiIO64                          -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.zigbee.0                 : zigbee                : raspberrypiIO64                          - disabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : raspberrypiIO64                          -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypiIO64                          -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : raspberrypiIO64                          -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypiIO64                          -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.owfs.0                   : owfs                  : raspberrypiIO64                          -  enabled, port: 4304
+ system.adapter.shelly.1                 : shelly                : raspberrypiIO64                          -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypiIO64                          -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypiIO64                          -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "owfs"         : 0.7.0    , installed 0.7.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-hqwidgets": 1.3.0    , installed 1.3.0
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        5675
States:         5142

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:7 https://packages.grafana.com/enterprise/deb stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       16707      1298/io.mqtt.0
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       12139      868/iobroker.js-con
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       13121      868/iobroker.js-con
tcp        0      0 192.168.2.54:2001       0.0.0.0:*               LISTEN      1001       15732      1240/io.hm-rpc.1
tcp        0      0 192.168.2.54:2010       0.0.0.0:*               LISTEN      1001       17534      1226/io.hm-rpc.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12972      578/sshd: /usr/sbin
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       19169      2135/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15537      1092/io.admin.1
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       18684      1675/io.simple-api.
tcp6       0      0 :::8086                 :::*                    LISTEN      999        12104      709/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      111        13154      867/grafana
tcp6       0      0 :::22                   :::*                    LISTEN      0          12974      578/sshd: /usr/sbin
udp        0      0 0.0.0.0:49615           0.0.0.0:*                           108        14575      413/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14573      413/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       16844      1531/io.shelly.1
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14051      706/dhcpcd
udp6       0      0 :::546                  :::*                                0          12997      706/dhcpcd
udp6       0      0 :::40016                :::*                                108        14576      413/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        14574      413/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-05-05 11:17:42.324  - warn: host.raspberrypiIO64 "system.host.debian11" is offline
2023-05-05 11:17:45.107  - warn: shelly.1 (1531) [authEnabled] 192.168.2.56 (shellyem / shellyem-244CAB419A03 / SHEM#244CAB419A03#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:45.328  - warn: shelly.1 (1531) [authEnabled] 192.168.2.12 (shellyswitch25 / shellyswitch25-3C6105E462D5 / SHSW-25#3C6105E462D5#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:45.370  - warn: shelly.1 (1531) [authEnabled] 192.168.2.9 (shellyswitch25 / shellyswitch25-3C6105E3A7AF / SHSW-25#3C6105E3A7AF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:45.376  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:45.467  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:45.780  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:50.202  - warn: shelly.1 (1531) [authEnabled] 192.168.2.56 (shellyem / shellyem-244CAB419A03 / SHEM#244CAB419A03#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:50.635  - warn: shelly.1 (1531) [authEnabled] 192.168.2.12 (shellyswitch25 / shellyswitch25-3C6105E462D5 / SHSW-25#3C6105E462D5#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:50.810  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:50.823  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:51.282  - warn: shelly.1 (1531) [authEnabled] 192.168.2.9 (shellyswitch25 / shellyswitch25-3C6105E3A7AF / SHSW-25#3C6105E3A7AF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:51.733  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:55.380  - warn: shelly.1 (1531) [authEnabled] 192.168.2.56 (shellyem / shellyem-244CAB419A03 / SHEM#244CAB419A03#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:55.856  - warn: shelly.1 (1531) [authEnabled] 192.168.2.12 (shellyswitch25 / shellyswitch25-3C6105E462D5 / SHSW-25#3C6105E462D5#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:56.280  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:56.351  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:56.494  - warn: shelly.1 (1531) [authEnabled] 192.168.2.9 (shellyswitch25 / shellyswitch25-3C6105E3A7AF / SHSW-25#3C6105E3A7AF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:17:57.185  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:18:00.477  - warn: shelly.1 (1531) [authEnabled] 192.168.2.56 (shellyem / shellyem-244CAB419A03 / SHEM#244CAB419A03#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:18:01.245  - warn: shelly.1 (1531) [authEnabled] 192.168.2.12 (shellyswitch25 / shellyswitch25-3C6105E462D5 / SHSW-25#3C6105E462D5#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:18:01.593  - warn: shelly.1 (1531) [authEnabled] 192.168.2.6 (shellyswitch25 / shellyswitch25-68C63AFA870D / SHSW-25#68C63AFA870D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:18:01.784  - warn: shelly.1 (1531) [authEnabled] 192.168.2.9 (shellyswitch25 / shellyswitch25-3C6105E3A7AF / SHSW-25#3C6105E3A7AF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:18:01.789  - warn: shelly.1 (1531) [authEnabled] 192.168.2.5 (shellyswitch25 / shellyswitch25-68C63AFA51AA / SHSW-25#68C63AFA51AA#1): This device is not protected via restricted login (see adapter documentation for details)
2023-05-05 11:18:02.523  - warn: shelly.1 (1531) [authEnabled] 192.168.2.52 (shellyem3 / shellyem3-485519D7986A / SHEM-3#485519D7986A#1): This device is not protected via restricted login (see adapter documentation for details)



============ Mark until here for C&P =============

iob diag has finished.


Press any key for a summary

Thomas Braun

@laser sagte in vedirekt Adapter Verbindungsproblem:

das kann man ignorieren. Muß aber nicht richtig sein.
Werde dieses Repostery löschen.

Du solltest es gescheit neu anlegen. Ist hier im Forum auch schon in einem Thread behandelt worden. Gleiches gilt für das grafana-Repo.

derAlff

@Laser hast du eventuell ein GX (Cerbo, Pi mit VenusOS, …) in deiner PV Installation?

Laser

@Thomas-Braun OK, werde neu anlegen. Muß nur noch die "richtige" Beschreibung finden. Nur das Repostery neu anlegen, nicht die Installationen löschen und neu machen?

gefunden:

wget -qO- https://repos.influxdata.com/influxdb.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdb.gpg > /dev/null
export DISTRIB_ID=$(lsb_release -si); export DISTRIB_CODENAME=$(lsb_release -sc)
echo "deb [signed-by=/etc/apt/trusted.gpg.d/influxdb.gpg] https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/influxdb.list > /dev/null

sudo apt-get update && sudo apt-get install influxdb2


otto@raspberrypiIO64:~ $ sudo apt-get update
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
Get:7 https://repos.influxdata.com/debian bullseye InRelease [7,031 B]
Hit:8 https://packages.grafana.com/enterprise/deb stable InRelease
Err:7 https://repos.influxdata.com/debian bullseye InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUB                                               KEY D8FF8E1F7DF8B07E
Reading package lists... Done
W: GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures                                                couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: The repository 'https://repos.influxdata.com/debian bullseye InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default                                               .
N: See apt-secure(8) manpage for repository creation and user configuration details.

Thomas Braun

@laser

Ist eigentlich was für einen anderen Threads. Ich sehe aber nicht, dass du die alte .list-Datei gelöscht hast.

Hier steht mehr dazu drin:

https://forum.iobroker.net/topic/62040/linux-debian-grafana-repo-muss-aktualisiert-werden

Laser

@thomas-braun die alte Datei habe ich mit Nano geöffnet und geleert. Reicht das nicht?
Das Grafana Repo habe ich nach der Anleitung im Link neu angelegt. Influx wird immer noch angemeckert!

Thomas Braun

@laser sagte in vedirekt Adapter Verbindungsproblem:

Reicht das nicht?

Die muss gelöscht werden.
Und die alten Keys auch.

Laser

@thomas-braun Aussage:
Das sicherste ist IMMER den Anleitungen direkt auf den Herstellerseiten zu folgen.

Hier für InfluxDB2:
Installation InfluxDB2für verschiedene Systeme

Da steht alles mögliche, aber nicht wie man die alten Keys löscht. Werde weitersuchen...

EDIT- jetzt scheint Alles OK zu sein. Keine Fehlermeldungen bei apt update.

Thomas Braun

@laser sagte in vedirekt Adapter Verbindungsproblem:

Das sicherste ist IMMER den Anleitungen direkt auf den Herstellerseiten zu folgen.

Stimmt überwiegend. Es findet sich auch auf den influxdb-Seiten entsprechendes.

Laser

@thomas-braun
Das eigentliche Problem, der Adapter wird immer "gelb" Meldung "error" im log besteht aber immer noch.
Habe jetzt versucht, mit einem Script den Adapter zu restarten, wenn "error " im Log steht. Ob das nun elegant ist? Geht es auch einfacher? Das Bash- Script befindet sich in /opt und enthält nur den Befehl :
sudo iobroker restart vedirect.0

// Script zum Erkennen des "error" im Adapter vedirekt 

onLog('vedirect' && 'error', data => {

    var SSH = require('simple-ssh');
var ssh = new SSH({
    host: '192.168.2.54',
    user: 'name',
    pass: 'passwort'
});
    
    setState('javascript.0.Logik.ErrorVE'/*ErrorVE*/,1)
    console.log('VE Err: ' + "1");

        // Adapter stoppen/starten (Beispiel):
 
    ssh.exec("bash /opt/verestart.sh").start();    
});

DJMarc75

@laser sagte in vedirekt Adapter Verbindungsproblem:

sudo iobroker restart vedirect.0

:dizzy_face:

Community Forum

NEWS

vedirekt Adapter Verbindungsproblem

Support us

886

32.5k

81.6k

1.3m