Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. ioBroker Allgemein
  4. ESPHome: Reinstallation aber wie?

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.7k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.2k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    3.1k

ESPHome: Reinstallation aber wie?

Geplant Angeheftet Gesperrt Verschoben ioBroker Allgemein
esp32esphomem5stack
137 Beiträge 8 Kommentatoren 14.6k Aufrufe 7 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • S smarthome2020

    @thomas-braun

    wie finde ich heraus, ob es eine Sperrdatei gibt?

    Thomas BraunT Online
    Thomas BraunT Online
    Thomas Braun
    Most Active
    schrieb am zuletzt editiert von
    #105

    @smarthome2020

    Man muss die Sperrdatei EXTERNALLY-MANAGED kurz beiseite räumen:

    sudo mv /usr/lib/python3.11/EXTERNALLY-MANAGED ~
    iobroker add esphome --debug
    sudo mv ~/EXTERNALLY-MANAGED /usr/lib/python3.11/
    

    Statt python3.11 kann da auch ein Pfad mit deiner verwendeten Version in Frage kommen. Musst du auf deinem System schauen.

    Linux-Werkzeugkasten:
    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
    NodeJS Fixer Skript:
    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

    S 1 Antwort Letzte Antwort
    0
    • Thomas BraunT Thomas Braun

      @smarthome2020

      Man muss die Sperrdatei EXTERNALLY-MANAGED kurz beiseite räumen:

      sudo mv /usr/lib/python3.11/EXTERNALLY-MANAGED ~
      iobroker add esphome --debug
      sudo mv ~/EXTERNALLY-MANAGED /usr/lib/python3.11/
      

      Statt python3.11 kann da auch ein Pfad mit deiner verwendeten Version in Frage kommen. Musst du auf deinem System schauen.

      S Offline
      S Offline
      smarthome2020
      schrieb am zuletzt editiert von
      #106

      @thomas-braun

      unter cd/usr/lib/python3.9 findet sich bei mir keine Datei mit dem Namen EXTERNALLY-MANAGED. Wenn ich den Befehl von dir einfüge, findet er auch keine Datei. Scheinbar gibt es die Sperrdatei dann bei mir nicht?

      Thomas BraunT 1 Antwort Letzte Antwort
      0
      • S smarthome2020

        @thomas-braun

        unter cd/usr/lib/python3.9 findet sich bei mir keine Datei mit dem Namen EXTERNALLY-MANAGED. Wenn ich den Befehl von dir einfüge, findet er auch keine Datei. Scheinbar gibt es die Sperrdatei dann bei mir nicht?

        Thomas BraunT Online
        Thomas BraunT Online
        Thomas Braun
        Most Active
        schrieb am zuletzt editiert von
        #107

        @smarthome2020

        Dann schau die Rechte an.

        Linux-Werkzeugkasten:
        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
        NodeJS Fixer Skript:
        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

        S 1 Antwort Letzte Antwort
        0
        • Thomas BraunT Thomas Braun

          @smarthome2020

          Dann schau die Rechte an.

          S Offline
          S Offline
          smarthome2020
          schrieb am zuletzt editiert von
          #108

          @thomas-braun

          Also wie genau kann ich nach Rechten schauen? Und für was soll ich mir die Rechte anschauen?

          1 Antwort Letzte Antwort
          0
          • S smarthome2020

            Hallo Leute ,

            also ich habe auch Probleme mit dem Adapter . Nach dem Umzug auf Bullseye wollte dieser zunächst nicht starten . Hatte ein Backup per Backitup gemacht und eingespielt. Nachdem ich dann nodejs von 16 auf 18 gebracht habe, ging der Adapter zwar, ich kann nun die Oberfläche nur nicht öffnen. Vorhandene Geräte einbinden kann ich und bekomme auch die Datenpunkte . Mehr ist jedoch nicht möglich . Gibt es hier Neuigkeiten ? Will nun nicht nochmal das ganze System aufsetzen .

            Schönen Sonntag wünsche ich euch

            Thomas BraunT Online
            Thomas BraunT Online
            Thomas Braun
            Most Active
            schrieb am zuletzt editiert von
            #109

            @smarthome2020

            ls -la /opt/iobroker/node_modules/nopy/src/
            

            Linux-Werkzeugkasten:
            https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
            NodeJS Fixer Skript:
            https://forum.iobroker.net/topic/68035/iob-node-fix-skript
            iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

            S 1 Antwort Letzte Antwort
            0
            • Thomas BraunT Thomas Braun

              @smarthome2020

              ls -la /opt/iobroker/node_modules/nopy/src/
              
              S Offline
              S Offline
              smarthome2020
              schrieb am zuletzt editiert von
              #110

              @thomas-braun

              Folgendes wird mir da dann ausgegeben:

              total 2656
              drwxrwxr-x+ 3 iobroker iobroker    4096 Apr 22 12:38 .
              drwxrwxr-x+ 4 iobroker iobroker    4096 Apr 22 12:38 ..
              -rwxrwxr-x+ 1 iobroker iobroker    7536 Apr 22 12:38 api.js
              -rwxrwxr-x+ 1 iobroker iobroker 2680354 Apr 22 12:39 get-pip.py
              -rwxrwxr-x+ 1 iobroker iobroker     530 Apr 22 12:38 nopenv.js
              -rwxrwxr-x+ 1 iobroker iobroker     397 Apr 22 12:38 nopy.js
              -rwxrwxr-x+ 1 iobroker iobroker    3091 Apr 22 12:38 npip.js
              drwxrwxr-x+ 2 iobroker iobroker    4096 Apr 22 12:39 test
              -rwxrwxr-x+ 1 iobroker iobroker     822 Apr 22 12:38 utils.js
              
              
              Thomas BraunT 2 Antworten Letzte Antwort
              0
              • S smarthome2020

                @thomas-braun

                Folgendes wird mir da dann ausgegeben:

                total 2656
                drwxrwxr-x+ 3 iobroker iobroker    4096 Apr 22 12:38 .
                drwxrwxr-x+ 4 iobroker iobroker    4096 Apr 22 12:38 ..
                -rwxrwxr-x+ 1 iobroker iobroker    7536 Apr 22 12:38 api.js
                -rwxrwxr-x+ 1 iobroker iobroker 2680354 Apr 22 12:39 get-pip.py
                -rwxrwxr-x+ 1 iobroker iobroker     530 Apr 22 12:38 nopenv.js
                -rwxrwxr-x+ 1 iobroker iobroker     397 Apr 22 12:38 nopy.js
                -rwxrwxr-x+ 1 iobroker iobroker    3091 Apr 22 12:38 npip.js
                drwxrwxr-x+ 2 iobroker iobroker    4096 Apr 22 12:39 test
                -rwxrwxr-x+ 1 iobroker iobroker     822 Apr 22 12:38 utils.js
                
                
                Thomas BraunT Online
                Thomas BraunT Online
                Thomas Braun
                Most Active
                schrieb am zuletzt editiert von
                #111

                @smarthome2020

                Installier den Adapter nochmal neu.

                Linux-Werkzeugkasten:
                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                NodeJS Fixer Skript:
                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                1 Antwort Letzte Antwort
                0
                • S smarthome2020

                  @thomas-braun

                  Folgendes wird mir da dann ausgegeben:

                  total 2656
                  drwxrwxr-x+ 3 iobroker iobroker    4096 Apr 22 12:38 .
                  drwxrwxr-x+ 4 iobroker iobroker    4096 Apr 22 12:38 ..
                  -rwxrwxr-x+ 1 iobroker iobroker    7536 Apr 22 12:38 api.js
                  -rwxrwxr-x+ 1 iobroker iobroker 2680354 Apr 22 12:39 get-pip.py
                  -rwxrwxr-x+ 1 iobroker iobroker     530 Apr 22 12:38 nopenv.js
                  -rwxrwxr-x+ 1 iobroker iobroker     397 Apr 22 12:38 nopy.js
                  -rwxrwxr-x+ 1 iobroker iobroker    3091 Apr 22 12:38 npip.js
                  drwxrwxr-x+ 2 iobroker iobroker    4096 Apr 22 12:39 test
                  -rwxrwxr-x+ 1 iobroker iobroker     822 Apr 22 12:38 utils.js
                  
                  
                  Thomas BraunT Online
                  Thomas BraunT Online
                  Thomas Braun
                  Most Active
                  schrieb am zuletzt editiert von Thomas Braun
                  #112

                  @smarthome2020

                  Und dann zeig mal einen Start des Adapters. Schaut bei mir so aus:

                  2023-04-23 14:57:21.204  - info: host.chet instance system.adapter.esphome.0 started with pid 1244918
                  2023-04-23 14:57:24.024  - info: esphome.0 (1244918) starting. Version 0.2.4 in /opt/iobroker/node_modules/iobroker.esphome, node: v18.16.0, js-controller: 5.0.1-alpha.0-20230418-efa3e809
                  2023-04-23 14:57:24.135  - info: esphome.0 (1244918) Auto Discovery startet, new devices (or IP changes) will be detected automatically
                  2023-04-23 14:57:24.144  - info: esphome.0 (1244918) Native Integration of ESPHome Dashboard enabled
                  2023-04-23 14:57:26.512  - info: esphome.0 (1244918) [ESPHome - Console] 2023-04-23 14:57:26,511 INFO Starting dashboard web server on http://0.0.0.0:6052 and configuration dir /opt/iobroker/iobroker-data/esphome.0...
                  

                  Linux-Werkzeugkasten:
                  https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                  NodeJS Fixer Skript:
                  https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                  iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                  S 1 Antwort Letzte Antwort
                  0
                  • Thomas BraunT Thomas Braun

                    @smarthome2020

                    Und dann zeig mal einen Start des Adapters. Schaut bei mir so aus:

                    2023-04-23 14:57:21.204  - info: host.chet instance system.adapter.esphome.0 started with pid 1244918
                    2023-04-23 14:57:24.024  - info: esphome.0 (1244918) starting. Version 0.2.4 in /opt/iobroker/node_modules/iobroker.esphome, node: v18.16.0, js-controller: 5.0.1-alpha.0-20230418-efa3e809
                    2023-04-23 14:57:24.135  - info: esphome.0 (1244918) Auto Discovery startet, new devices (or IP changes) will be detected automatically
                    2023-04-23 14:57:24.144  - info: esphome.0 (1244918) Native Integration of ESPHome Dashboard enabled
                    2023-04-23 14:57:26.512  - info: esphome.0 (1244918) [ESPHome - Console] 2023-04-23 14:57:26,511 INFO Starting dashboard web server on http://0.0.0.0:6052 and configuration dir /opt/iobroker/iobroker-data/esphome.0...
                    
                    S Offline
                    S Offline
                    smarthome2020
                    schrieb am zuletzt editiert von
                    #113

                    @thomas-braun
                    Ich kann ihn nun gar nicht mehr installieren:

                    $ iobroker add esphome --host raspberrypi
                    
                    NPM version: 9.5.1
                    
                    Installing iobroker.esphome@0.2.4... (System call)
                    
                    host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1
                    
                    ERROR: Process exited with code 25
                    
                    Thomas BraunT 1 Antwort Letzte Antwort
                    0
                    • S smarthome2020

                      @thomas-braun
                      Ich kann ihn nun gar nicht mehr installieren:

                      $ iobroker add esphome --host raspberrypi
                      
                      NPM version: 9.5.1
                      
                      Installing iobroker.esphome@0.2.4... (System call)
                      
                      host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1
                      
                      ERROR: Process exited with code 25
                      
                      Thomas BraunT Online
                      Thomas BraunT Online
                      Thomas Braun
                      Most Active
                      schrieb am zuletzt editiert von
                      #114

                      @smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

                      iobroker add esphome --host raspberrypi --debug
                      

                      Linux-Werkzeugkasten:
                      https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                      NodeJS Fixer Skript:
                      https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                      iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                      S 1 Antwort Letzte Antwort
                      0
                      • Thomas BraunT Thomas Braun

                        @smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

                        iobroker add esphome --host raspberrypi --debug
                        
                        S Offline
                        S Offline
                        smarthome2020
                        schrieb am zuletzt editiert von
                        #115

                        @thomas-braun

                        npm ERR! code 1
                        npm ERR! path /opt/iobroker/node_modules/iobroker.esphome
                        npm ERR! command failed
                        npm ERR! command sh -c npip install
                        npm ERR! No python_modules directory; installing pip locally if needed.
                        npm ERR! Successfully completed pip check.
                        npm ERR! Collecting esphome>=2021.8
                        npm ERR!   Using cached esphome-2023.4.0-py2.py3-none-any.whl (2.6 MB)
                        npm ERR! Collecting tornado>=3.2
                        npm ERR!   Using cached tornado-6.3.1.tar.gz (508 kB)
                        npm ERR!   Installing build dependencies: started
                        npm ERR!   Installing build dependencies: finished with status 'done'
                        npm ERR!   Getting requirements to build wheel: started
                        npm ERR!   Getting requirements to build wheel: finished with status 'done'
                        npm ERR!   Preparing metadata (pyproject.toml): started
                        npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                        npm ERR! Collecting voluptuous==0.13.1 (from esphome>=2021.8)
                        npm ERR!   Using cached voluptuous-0.13.1-py3-none-any.whl (29 kB)
                        npm ERR! Collecting PyYAML==6.0 (from esphome>=2021.8)
                        npm ERR!   Using cached PyYAML-6.0.tar.gz (124 kB)
                        npm ERR!   Installing build dependencies: started
                        npm ERR!   Installing build dependencies: finished with status 'done'
                        npm ERR!   Getting requirements to build wheel: started
                        npm ERR!   Getting requirements to build wheel: finished with status 'done'
                        npm ERR!   Preparing metadata (pyproject.toml): started
                        npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                        npm ERR! Collecting paho-mqtt==1.6.1 (from esphome>=2021.8)
                        npm ERR!   Using cached paho-mqtt-1.6.1.tar.gz (99 kB)
                        npm ERR!   Preparing metadata (setup.py): started
                        npm ERR!   Preparing metadata (setup.py): finished with status 'done'
                        npm ERR! Collecting colorama==0.4.6 (from esphome>=2021.8)
                        npm ERR!   Using cached colorama-0.4.6-py2.py3-none-any.whl (25 kB)
                        npm ERR! Collecting tornado>=3.2
                        npm ERR!   Using cached tornado-6.2.tar.gz (504 kB)
                        npm ERR!   Installing build dependencies: started
                        npm ERR!   Installing build dependencies: finished with status 'done'
                        npm ERR!   Getting requirements to build wheel: started
                        npm ERR!   Getting requirements to build wheel: finished with status 'done'
                        npm ERR!   Preparing metadata (pyproject.toml): started
                        npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                        npm ERR! Collecting tzlocal==4.2 (from esphome>=2021.8)
                        npm ERR!   Using cached tzlocal-4.2-py3-none-any.whl (19 kB)
                        npm ERR! Collecting tzdata>=2021.1 (from esphome>=2021.8)
                        npm ERR!   Using cached tzdata-2023.3-py2.py3-none-any.whl (341 kB)
                        npm ERR! Collecting pyserial==3.5 (from esphome>=2021.8)
                        npm ERR!   Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB)
                        npm ERR! Collecting platformio==6.1.6 (from esphome>=2021.8)
                        npm ERR!   Using cached platformio-6.1.6.tar.gz (236 kB)
                        npm ERR!   Preparing metadata (setup.py): started
                        npm ERR!   Preparing metadata (setup.py): finished with status 'done'
                        npm ERR! Collecting esptool==4.5.1 (from esphome>=2021.8)
                        npm ERR!   Using cached esptool-4.5.1.tar.gz (252 kB)
                        npm ERR!   Preparing metadata (setup.py): started
                        npm ERR!   Preparing metadata (setup.py): finished with status 'done'
                        npm ERR! Collecting click==8.1.3 (from esphome>=2021.8)
                        npm ERR!   Using cached click-8.1.3-py3-none-any.whl (96 kB)
                        npm ERR! Collecting esphome-dashboard==20230214.0 (from esphome>=2021.8)
                        npm ERR!   Using cached esphome_dashboard-20230214.0-py3-none-any.whl (1.6 MB)
                        npm ERR! Collecting aioesphomeapi==13.5.1 (from esphome>=2021.8)
                        npm ERR!   Using cached aioesphomeapi-13.5.1-py2.py3-none-any.whl (54 kB)
                        npm ERR! Collecting zeroconf==0.56.0 (from esphome>=2021.8)
                        npm ERR!   Using cached zeroconf-0.56.0.tar.gz (140 kB)
                        npm ERR!   Installing build dependencies: started
                        npm ERR!   Installing build dependencies: finished with status 'done'
                        npm ERR!   Getting requirements to build wheel: started
                        npm ERR!   Getting requirements to build wheel: finished with status 'done'
                        npm ERR!   Preparing metadata (pyproject.toml): started
                        npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                        npm ERR! Collecting kconfiglib==13.7.1 (from esphome>=2021.8)
                        npm ERR!   Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB)
                        npm ERR! Collecting protobuf>=3.19.0 (from aioesphomeapi==13.5.1->esphome>=2021.8)
                        npm ERR!   Using cached protobuf-4.22.3-py3-none-any.whl (172 kB)
                        npm ERR! Collecting noiseprotocol<1.0,>=0.3.1 (from aioesphomeapi==13.5.1->esphome>=2021.8)
                        npm ERR!   Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB)
                        npm ERR! Collecting async-timeout>=4.0 (from aioesphomeapi==13.5.1->esphome>=2021.8)
                        npm ERR!   Using cached async_timeout-4.0.2-py3-none-any.whl (5.8 kB)
                        npm ERR! Collecting bitstring>=3.1.6 (from esptool==4.5.1->esphome>=2021.8)
                        npm ERR!   Using cached bitstring-4.0.2-py3-none-any.whl (46 kB)
                        npm ERR! Collecting cryptography>=2.1.4 (from esptool==4.5.1->esphome>=2021.8)
                        npm ERR!   Using cached cryptography-40.0.2.tar.gz (625 kB)
                        npm ERR!   Installing build dependencies: started
                        npm ERR!   Installing build dependencies: finished with status 'error'
                        npm ERR! /usr/bin/python3: No module named pip
                        npm ERR! /usr/bin/python3: No module named ensurepip
                        npm ERR!   error: subprocess-exited-with-error
                        npm ERR!
                        npm ERR!   × pip subprocess to install build dependencies did not run successfully.
                        npm ERR!   │ exit code: 1
                        npm ERR!   ╰─> [81 lines of output]
                        npm ERR!       Collecting setuptools!=60.9.0,>=40.6.0
                        npm ERR!         Using cached setuptools-67.7.1-py3-none-any.whl (1.1 MB)
                        npm ERR!       Collecting wheel
                        npm ERR!         Using cached wheel-0.40.0-py3-none-any.whl (64 kB)
                        npm ERR!       Collecting cffi>=1.12
                        npm ERR!         Using cached cffi-1.15.1.tar.gz (508 kB)
                        npm ERR!         Preparing metadata (setup.py): started
                        npm ERR!         Preparing metadata (setup.py): finished with status 'done'
                        npm ERR!       Collecting setuptools-rust>=0.11.4
                        npm ERR!         Using cached setuptools_rust-1.5.2-py3-none-any.whl (23 kB)
                        npm ERR!       Collecting pycparser (from cffi>=1.12)
                        npm ERR!         Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
                        npm ERR!       Collecting semantic-version<3,>=2.8.2 (from setuptools-rust>=0.11.4)
                        npm ERR!         Using cached semantic_version-2.10.0-py2.py3-none-any.whl (15 kB)
                        npm ERR!       Collecting typing-extensions>=3.7.4.3 (from setuptools-rust>=0.11.4)
                        npm ERR!         Using cached typing_extensions-4.5.0-py3-none-any.whl (27 kB)
                        npm ERR!       Building wheels for collected packages: cffi
                        npm ERR!         Building wheel for cffi (setup.py): started
                        npm ERR!         Building wheel for cffi (setup.py): finished with status 'error'
                        npm ERR!         error: subprocess-exited-with-error
                        npm ERR!
                        npm ERR!         × python setup.py bdist_wheel did not run successfully.
                        npm ERR!         │ exit code: 1
                        npm ERR!         ╰─> [50 lines of output]
                        npm ERR!             /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:293: _DeprecatedConfig: Deprecated config in `setup.cfg`
                        npm ERR!             !!
                        npm ERR!
                        npm ERR!                     ********************************************************************************
                        npm ERR!                     The license_file parameter is deprecated, use license_files instead.
                        npm ERR!
                        npm ERR!                     By 2023-Oct-30, you need to update your project and remove deprecated calls
                        npm ERR!                     or your builds will no longer be supported.
                        npm ERR!
                        npm ERR!                     See https://setuptools.pypa.io/en/latest/https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details.
                        npm ERR!                     ********************************************************************************
                        npm ERR!
                        npm ERR!             !!
                        npm ERR!               parsed = self.parsers.get(option_name, lambda x: x)(value)
                        npm ERR!             running bdist_wheel
                        npm ERR!             running build
                        npm ERR!             running build_py
                        npm ERR!             creating build
                        npm ERR!             creating build/lib.linux-aarch64-cpython-39
                        npm ERR!             creating build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/lock.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/cparser.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/verifier.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/vengine_gen.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/backend_ctypes.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/vengine_cpy.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/setuptools_ext.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/error.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/cffi_opcode.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/__init__.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/model.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/pkgconfig.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/recompiler.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/api.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/ffiplatform.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/commontypes.py -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/_cffi_include.h -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/parse_c_type.h -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/_embedding.h -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             copying cffi/_cffi_errors.h -> build/lib.linux-aarch64-cpython-39/cffi
                        npm ERR!             running build_ext
                        npm ERR!             building '_cffi_backend' extension
                        npm ERR!             creating build/temp.linux-aarch64-cpython-39
                        npm ERR!             creating build/temp.linux-aarch64-cpython-39/c
                        npm ERR!             arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-aarch64-cpython-39/c/_cffi_backend.o
                        npm ERR!             c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
                        npm ERR!                 2 | #include <Python.h>
                        npm ERR!                   |          ^~~~~~~~~~
                        npm ERR!             compilation terminated.
                        npm ERR!             error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1
                        npm ERR!             [end of output]
                        npm ERR!
                        npm ERR!         note: This error originates from a subprocess, and is likely not a problem with pip.
                        npm ERR!         ERROR: Failed building wheel for cffi
                        npm ERR!         Running setup.py clean for cffi
                        npm ERR!       Failed to build cffi
                        npm ERR!       ERROR: Could not build wheels for cffi, which is required to install pyproject.toml-based projects
                        npm ERR!       [end of output]
                        npm ERR!
                        npm ERR!   note: This error originates from a subprocess, and is likely not a problem with pip.
                        npm ERR! error: subprocess-exited-with-error
                        npm ERR!
                        npm ERR! × pip subprocess to install build dependencies did not run successfully.
                        npm ERR! │ exit code: 1
                        npm ERR! ╰─> See above for output.
                        npm ERR!
                        npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip.
                        
                        npm ERR! A complete log of this run can be found in:
                        npm ERR!     /home/iobroker/.npm/_logs/2023-04-23T13_12_46_529Z-debug-0.log
                        host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1
                        
                        
                        Thomas BraunT 1 Antwort Letzte Antwort
                        0
                        • S smarthome2020

                          @thomas-braun

                          npm ERR! code 1
                          npm ERR! path /opt/iobroker/node_modules/iobroker.esphome
                          npm ERR! command failed
                          npm ERR! command sh -c npip install
                          npm ERR! No python_modules directory; installing pip locally if needed.
                          npm ERR! Successfully completed pip check.
                          npm ERR! Collecting esphome>=2021.8
                          npm ERR!   Using cached esphome-2023.4.0-py2.py3-none-any.whl (2.6 MB)
                          npm ERR! Collecting tornado>=3.2
                          npm ERR!   Using cached tornado-6.3.1.tar.gz (508 kB)
                          npm ERR!   Installing build dependencies: started
                          npm ERR!   Installing build dependencies: finished with status 'done'
                          npm ERR!   Getting requirements to build wheel: started
                          npm ERR!   Getting requirements to build wheel: finished with status 'done'
                          npm ERR!   Preparing metadata (pyproject.toml): started
                          npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                          npm ERR! Collecting voluptuous==0.13.1 (from esphome>=2021.8)
                          npm ERR!   Using cached voluptuous-0.13.1-py3-none-any.whl (29 kB)
                          npm ERR! Collecting PyYAML==6.0 (from esphome>=2021.8)
                          npm ERR!   Using cached PyYAML-6.0.tar.gz (124 kB)
                          npm ERR!   Installing build dependencies: started
                          npm ERR!   Installing build dependencies: finished with status 'done'
                          npm ERR!   Getting requirements to build wheel: started
                          npm ERR!   Getting requirements to build wheel: finished with status 'done'
                          npm ERR!   Preparing metadata (pyproject.toml): started
                          npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                          npm ERR! Collecting paho-mqtt==1.6.1 (from esphome>=2021.8)
                          npm ERR!   Using cached paho-mqtt-1.6.1.tar.gz (99 kB)
                          npm ERR!   Preparing metadata (setup.py): started
                          npm ERR!   Preparing metadata (setup.py): finished with status 'done'
                          npm ERR! Collecting colorama==0.4.6 (from esphome>=2021.8)
                          npm ERR!   Using cached colorama-0.4.6-py2.py3-none-any.whl (25 kB)
                          npm ERR! Collecting tornado>=3.2
                          npm ERR!   Using cached tornado-6.2.tar.gz (504 kB)
                          npm ERR!   Installing build dependencies: started
                          npm ERR!   Installing build dependencies: finished with status 'done'
                          npm ERR!   Getting requirements to build wheel: started
                          npm ERR!   Getting requirements to build wheel: finished with status 'done'
                          npm ERR!   Preparing metadata (pyproject.toml): started
                          npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                          npm ERR! Collecting tzlocal==4.2 (from esphome>=2021.8)
                          npm ERR!   Using cached tzlocal-4.2-py3-none-any.whl (19 kB)
                          npm ERR! Collecting tzdata>=2021.1 (from esphome>=2021.8)
                          npm ERR!   Using cached tzdata-2023.3-py2.py3-none-any.whl (341 kB)
                          npm ERR! Collecting pyserial==3.5 (from esphome>=2021.8)
                          npm ERR!   Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB)
                          npm ERR! Collecting platformio==6.1.6 (from esphome>=2021.8)
                          npm ERR!   Using cached platformio-6.1.6.tar.gz (236 kB)
                          npm ERR!   Preparing metadata (setup.py): started
                          npm ERR!   Preparing metadata (setup.py): finished with status 'done'
                          npm ERR! Collecting esptool==4.5.1 (from esphome>=2021.8)
                          npm ERR!   Using cached esptool-4.5.1.tar.gz (252 kB)
                          npm ERR!   Preparing metadata (setup.py): started
                          npm ERR!   Preparing metadata (setup.py): finished with status 'done'
                          npm ERR! Collecting click==8.1.3 (from esphome>=2021.8)
                          npm ERR!   Using cached click-8.1.3-py3-none-any.whl (96 kB)
                          npm ERR! Collecting esphome-dashboard==20230214.0 (from esphome>=2021.8)
                          npm ERR!   Using cached esphome_dashboard-20230214.0-py3-none-any.whl (1.6 MB)
                          npm ERR! Collecting aioesphomeapi==13.5.1 (from esphome>=2021.8)
                          npm ERR!   Using cached aioesphomeapi-13.5.1-py2.py3-none-any.whl (54 kB)
                          npm ERR! Collecting zeroconf==0.56.0 (from esphome>=2021.8)
                          npm ERR!   Using cached zeroconf-0.56.0.tar.gz (140 kB)
                          npm ERR!   Installing build dependencies: started
                          npm ERR!   Installing build dependencies: finished with status 'done'
                          npm ERR!   Getting requirements to build wheel: started
                          npm ERR!   Getting requirements to build wheel: finished with status 'done'
                          npm ERR!   Preparing metadata (pyproject.toml): started
                          npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
                          npm ERR! Collecting kconfiglib==13.7.1 (from esphome>=2021.8)
                          npm ERR!   Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB)
                          npm ERR! Collecting protobuf>=3.19.0 (from aioesphomeapi==13.5.1->esphome>=2021.8)
                          npm ERR!   Using cached protobuf-4.22.3-py3-none-any.whl (172 kB)
                          npm ERR! Collecting noiseprotocol<1.0,>=0.3.1 (from aioesphomeapi==13.5.1->esphome>=2021.8)
                          npm ERR!   Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB)
                          npm ERR! Collecting async-timeout>=4.0 (from aioesphomeapi==13.5.1->esphome>=2021.8)
                          npm ERR!   Using cached async_timeout-4.0.2-py3-none-any.whl (5.8 kB)
                          npm ERR! Collecting bitstring>=3.1.6 (from esptool==4.5.1->esphome>=2021.8)
                          npm ERR!   Using cached bitstring-4.0.2-py3-none-any.whl (46 kB)
                          npm ERR! Collecting cryptography>=2.1.4 (from esptool==4.5.1->esphome>=2021.8)
                          npm ERR!   Using cached cryptography-40.0.2.tar.gz (625 kB)
                          npm ERR!   Installing build dependencies: started
                          npm ERR!   Installing build dependencies: finished with status 'error'
                          npm ERR! /usr/bin/python3: No module named pip
                          npm ERR! /usr/bin/python3: No module named ensurepip
                          npm ERR!   error: subprocess-exited-with-error
                          npm ERR!
                          npm ERR!   × pip subprocess to install build dependencies did not run successfully.
                          npm ERR!   │ exit code: 1
                          npm ERR!   ╰─> [81 lines of output]
                          npm ERR!       Collecting setuptools!=60.9.0,>=40.6.0
                          npm ERR!         Using cached setuptools-67.7.1-py3-none-any.whl (1.1 MB)
                          npm ERR!       Collecting wheel
                          npm ERR!         Using cached wheel-0.40.0-py3-none-any.whl (64 kB)
                          npm ERR!       Collecting cffi>=1.12
                          npm ERR!         Using cached cffi-1.15.1.tar.gz (508 kB)
                          npm ERR!         Preparing metadata (setup.py): started
                          npm ERR!         Preparing metadata (setup.py): finished with status 'done'
                          npm ERR!       Collecting setuptools-rust>=0.11.4
                          npm ERR!         Using cached setuptools_rust-1.5.2-py3-none-any.whl (23 kB)
                          npm ERR!       Collecting pycparser (from cffi>=1.12)
                          npm ERR!         Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
                          npm ERR!       Collecting semantic-version<3,>=2.8.2 (from setuptools-rust>=0.11.4)
                          npm ERR!         Using cached semantic_version-2.10.0-py2.py3-none-any.whl (15 kB)
                          npm ERR!       Collecting typing-extensions>=3.7.4.3 (from setuptools-rust>=0.11.4)
                          npm ERR!         Using cached typing_extensions-4.5.0-py3-none-any.whl (27 kB)
                          npm ERR!       Building wheels for collected packages: cffi
                          npm ERR!         Building wheel for cffi (setup.py): started
                          npm ERR!         Building wheel for cffi (setup.py): finished with status 'error'
                          npm ERR!         error: subprocess-exited-with-error
                          npm ERR!
                          npm ERR!         × python setup.py bdist_wheel did not run successfully.
                          npm ERR!         │ exit code: 1
                          npm ERR!         ╰─> [50 lines of output]
                          npm ERR!             /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:293: _DeprecatedConfig: Deprecated config in `setup.cfg`
                          npm ERR!             !!
                          npm ERR!
                          npm ERR!                     ********************************************************************************
                          npm ERR!                     The license_file parameter is deprecated, use license_files instead.
                          npm ERR!
                          npm ERR!                     By 2023-Oct-30, you need to update your project and remove deprecated calls
                          npm ERR!                     or your builds will no longer be supported.
                          npm ERR!
                          npm ERR!                     See https://setuptools.pypa.io/en/latest/https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details.
                          npm ERR!                     ********************************************************************************
                          npm ERR!
                          npm ERR!             !!
                          npm ERR!               parsed = self.parsers.get(option_name, lambda x: x)(value)
                          npm ERR!             running bdist_wheel
                          npm ERR!             running build
                          npm ERR!             running build_py
                          npm ERR!             creating build
                          npm ERR!             creating build/lib.linux-aarch64-cpython-39
                          npm ERR!             creating build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/lock.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/cparser.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/verifier.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/vengine_gen.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/backend_ctypes.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/vengine_cpy.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/setuptools_ext.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/error.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/cffi_opcode.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/__init__.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/model.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/pkgconfig.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/recompiler.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/api.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/ffiplatform.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/commontypes.py -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/_cffi_include.h -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/parse_c_type.h -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/_embedding.h -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             copying cffi/_cffi_errors.h -> build/lib.linux-aarch64-cpython-39/cffi
                          npm ERR!             running build_ext
                          npm ERR!             building '_cffi_backend' extension
                          npm ERR!             creating build/temp.linux-aarch64-cpython-39
                          npm ERR!             creating build/temp.linux-aarch64-cpython-39/c
                          npm ERR!             arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-aarch64-cpython-39/c/_cffi_backend.o
                          npm ERR!             c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
                          npm ERR!                 2 | #include <Python.h>
                          npm ERR!                   |          ^~~~~~~~~~
                          npm ERR!             compilation terminated.
                          npm ERR!             error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1
                          npm ERR!             [end of output]
                          npm ERR!
                          npm ERR!         note: This error originates from a subprocess, and is likely not a problem with pip.
                          npm ERR!         ERROR: Failed building wheel for cffi
                          npm ERR!         Running setup.py clean for cffi
                          npm ERR!       Failed to build cffi
                          npm ERR!       ERROR: Could not build wheels for cffi, which is required to install pyproject.toml-based projects
                          npm ERR!       [end of output]
                          npm ERR!
                          npm ERR!   note: This error originates from a subprocess, and is likely not a problem with pip.
                          npm ERR! error: subprocess-exited-with-error
                          npm ERR!
                          npm ERR! × pip subprocess to install build dependencies did not run successfully.
                          npm ERR! │ exit code: 1
                          npm ERR! ╰─> See above for output.
                          npm ERR!
                          npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip.
                          
                          npm ERR! A complete log of this run can be found in:
                          npm ERR!     /home/iobroker/.npm/_logs/2023-04-23T13_12_46_529Z-debug-0.log
                          host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1
                          
                          
                          Thomas BraunT Online
                          Thomas BraunT Online
                          Thomas Braun
                          Most Active
                          schrieb am zuletzt editiert von
                          #116

                          @smarthome2020

                          Da stimmt was mit der python-Installation noch nicht.

                          find "/usr/lib" -name "EXTERNALLY-MANAGED"
                          

                          Linux-Werkzeugkasten:
                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                          NodeJS Fixer Skript:
                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                          S 1 Antwort Letzte Antwort
                          0
                          • Thomas BraunT Thomas Braun

                            @smarthome2020

                            Da stimmt was mit der python-Installation noch nicht.

                            find "/usr/lib" -name "EXTERNALLY-MANAGED"
                            
                            S Offline
                            S Offline
                            smarthome2020
                            schrieb am zuletzt editiert von
                            #117

                            @thomas-braun
                            auf den Befehl folgt bei mir gar nichts

                            HomoranH Thomas BraunT 3 Antworten Letzte Antwort
                            0
                            • S smarthome2020

                              @thomas-braun
                              auf den Befehl folgt bei mir gar nichts

                              HomoranH Nicht stören
                              HomoranH Nicht stören
                              Homoran
                              Global Moderator Administrators
                              schrieb am zuletzt editiert von
                              #118

                              @smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

                              @thomas-braun
                              auf den Befehl folgt bei mir gar nichts

                              immer alles zeigen!

                              kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                              Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                              der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                              1 Antwort Letzte Antwort
                              0
                              • S smarthome2020

                                @thomas-braun
                                auf den Befehl folgt bei mir gar nichts

                                Thomas BraunT Online
                                Thomas BraunT Online
                                Thomas Braun
                                Most Active
                                schrieb am zuletzt editiert von
                                #119

                                @smarthome2020

                                python --version
                                apt policy python3 build-essential python-is-python3
                                

                                Linux-Werkzeugkasten:
                                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                NodeJS Fixer Skript:
                                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                S 1 Antwort Letzte Antwort
                                0
                                • Thomas BraunT Thomas Braun

                                  @smarthome2020

                                  python --version
                                  apt policy python3 build-essential python-is-python3
                                  
                                  S Offline
                                  S Offline
                                  smarthome2020
                                  schrieb am zuletzt editiert von
                                  #120

                                  @thomas-braun

                                  Ich kann dir die Ausgabe heute Abend zeigen. Muss nun zur Schwiegermutter . Nur Probleme heute 😂

                                  1 Antwort Letzte Antwort
                                  0
                                  • S smarthome2020

                                    @thomas-braun
                                    auf den Befehl folgt bei mir gar nichts

                                    Thomas BraunT Online
                                    Thomas BraunT Online
                                    Thomas Braun
                                    Most Active
                                    schrieb am zuletzt editiert von Thomas Braun
                                    #121

                                    @smarthome2020

                                    cd /opt/iobroker
                                    npm i nopy
                                    sudo -u iobroker chmod ug+x /opt/iobroker/node_modules/nopy/src/n*
                                    

                                    Dann nochmal eine übliche Installation des esphome versuchen.

                                    Wenn der installiert wurde:

                                    cd /opt/iobroker 
                                    npm uninstall nopy
                                    

                                    Linux-Werkzeugkasten:
                                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                    NodeJS Fixer Skript:
                                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                    S 1 Antwort Letzte Antwort
                                    0
                                    • Thomas BraunT Thomas Braun

                                      @smarthome2020

                                      cd /opt/iobroker
                                      npm i nopy
                                      sudo -u iobroker chmod ug+x /opt/iobroker/node_modules/nopy/src/n*
                                      

                                      Dann nochmal eine übliche Installation des esphome versuchen.

                                      Wenn der installiert wurde:

                                      cd /opt/iobroker 
                                      npm uninstall nopy
                                      
                                      S Offline
                                      S Offline
                                      smarthome2020
                                      schrieb am zuletzt editiert von
                                      #122

                                      @thomas-braun
                                      Ging leider auch nicht . Endet wieder mit einer Error 25.
                                      Vielleicht muss ich auch den Weg über ein neu aufgesetztes linux gehen und das Backup ohne ESPHome einspielen.

                                      Thomas BraunT 1 Antwort Letzte Antwort
                                      0
                                      • S smarthome2020

                                        @thomas-braun
                                        Ging leider auch nicht . Endet wieder mit einer Error 25.
                                        Vielleicht muss ich auch den Weg über ein neu aufgesetztes linux gehen und das Backup ohne ESPHome einspielen.

                                        Thomas BraunT Online
                                        Thomas BraunT Online
                                        Thomas Braun
                                        Most Active
                                        schrieb am zuletzt editiert von
                                        #123

                                        @smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

                                        Ging leider auch nicht . Endet wieder mit einer Error 25.

                                        Ich brauch immer die Langfassung. Error 25 sagt gar nix.

                                        Linux-Werkzeugkasten:
                                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                        NodeJS Fixer Skript:
                                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                        S 1 Antwort Letzte Antwort
                                        0
                                        • Thomas BraunT Thomas Braun

                                          @smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

                                          Ging leider auch nicht . Endet wieder mit einer Error 25.

                                          Ich brauch immer die Langfassung. Error 25 sagt gar nix.

                                          S Offline
                                          S Offline
                                          smarthome2020
                                          schrieb am zuletzt editiert von
                                          #124

                                          @thomas-braun

                                          
                                          $ iobroker add esphome --host raspberrypi
                                          Installing iobroker.esphome@0.2.4... (System call)
                                          host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1
                                          ERROR: Process exited with code 25
                                          
                                          
                                          Thomas BraunT 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate
                                          FAQ Cloud / IOT
                                          HowTo: Node.js-Update
                                          HowTo: Backup/Restore
                                          Downloads
                                          BLOG

                                          928

                                          Online

                                          32.4k

                                          Benutzer

                                          81.5k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe