NEWS
ESPHome: Reinstallation aber wie?
ioBroker Allgemein
137
Beiträge
8
Kommentatoren
14.6k
Aufrufe
7
Watching
-
Hoffe es gibt einen Hinweis und auch nochmal probiert:
- frisches System mit installiertem Adapter (!siehe Termialausgabe zur esphome Version) mit dem Ergebnis, dass eine Kompilierung über den Adapter funktioniert:
pi@debian:~$ python3 --version Python 3.9.2 pi@debian:~$ node -v v18.15.0 pi@debian:~$ npm -v 9.5.0 pi@debian:~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye pi@debian:~$ esphome version -bash: esphome: Kommando nicht gefunden.-
Dann das Restore durchgeführt und sofort sind die Fehler wieder da.
-
Neue frische Maschine und die BackupDatei von BackitUp um den esphome.0 Ordner erleichtert/gelöscht und eingespielt. Also ESPHome über das Restore erstmalig installiert. Hier eine x-beliebige Test-yaml probiert und die wurde gerade ohne Fehler kompiliert. Ein Ansatz zur Lösung?
Die Reihenfolge erscheint mir wichtig, da ich ESPHome bzw. den Adapter und dann den esphome.0 Ordner schon mal gelöscht hatte mit darauffolgender Neuinstallation des Adapters, was nicht funktioniert hat.
Edit: so auf dieser virtuellen Maschine gerade mal den tatsächlichen Code kompilieren lassen und auch das geht (es gibt nur gelbe Warnungen):
INFO Reading configuration /opt/iobroker/iobroker-data/esphome.0/test.yaml... INFO Generating C++ source... INFO Core config or version changed, cleaning build files... INFO Compiling app... Processing esp32-flur (board: m5stack-core-esp32; framework: arduino; platform: platformio/espressif32 @ 5.2.0) -------------------------------------------------------------------------------- Library Manager: Installing esphome/AsyncTCP-esphome @ 1.2.2 INFO Installing esphome/AsyncTCP-esphome @ 1.2.2 Unpacking [####################################] 100% Library Manager: AsyncTCP-esphome@1.2.2 has been installed! INFO AsyncTCP-esphome@1.2.2 has been installed! Library Manager: Installing esphome/ESPAsyncWebServer-esphome @ 2.1.0 INFO Installing esphome/ESPAsyncWebServer-esphome @ 2.1.0 Unpacking [####################################] 100% Library Manager: ESPAsyncWebServer-esphome@2.1.0 has been installed! INFO ESPAsyncWebServer-esphome@2.1.0 has been installed! Library Manager: Resolving dependencies... INFO Resolving dependencies... Library Manager: Installing bblanchon/ArduinoJson @ 6.18.5 INFO Installing bblanchon/ArduinoJson @ 6.18.5 Downloading [####################################] 100% Unpacking [####################################] 100% Library Manager: ArduinoJson@6.18.5 has been installed! INFO ArduinoJson@6.18.5 has been installed! Library Manager: Installing fastled/FastLED @ 3.3.2 INFO Installing fastled/FastLED @ 3.3.2 Downloading [####################################] 100% Unpacking [####################################] 100% Library Manager: FastLED@3.3.2 has been installed! INFO FastLED@3.3.2 has been installed! HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch3 LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf Dependency Graph |-- AsyncTCP-esphome @ 1.2.2 |-- WiFi @ 2.0.0 |-- FS @ 2.0.0 |-- Update @ 2.0.0 |-- ESPAsyncWebServer-esphome @ 2.1.0 | |-- AsyncTCP-esphome @ 1.2.2 |-- DNSServer @ 2.0.0 |-- ESPmDNS @ 2.0.0 |-- ArduinoJson @ 6.18.5 |-- FastLED @ 3.3.2 Compiling .pioenvs/esp32-flur/libe2e/FastLED/FastLED.cpp.o Compiling .pioenvs/esp32-flur/libe2e/FastLED/bitswap.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/FastLED.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/bitswap.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/FastLED.cpp:2: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/FastLED.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/bitswap.cpp:2: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/bitswap.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Compiling .pioenvs/esp32-flur/libe2e/FastLED/colorpalettes.cpp.o Compiling .pioenvs/esp32-flur/libe2e/FastLED/colorutils.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/colorpalettes.cpp:4: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/colorutils.cpp:7: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/colorpalettes.cpp:4: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/colorpalettes.cpp:4: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/colorutils.cpp:7: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/colorutils.cpp:7: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Compiling .pioenvs/esp32-flur/libe2e/FastLED/hsv2rgb.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/hsv2rgb.cpp:4: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ Compiling .pioenvs/esp32-flur/libe2e/FastLED/lib8tion.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/hsv2rgb.cpp:4: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/hsv2rgb.cpp:4: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/lib8tion.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ Compiling .pioenvs/esp32-flur/libe2e/FastLED/noise.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/noise.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/lib8tion.cpp:3: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/lib8tion.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Compiling .pioenvs/esp32-flur/libe2e/FastLED/platforms.cpp.o Compiling .pioenvs/esp32-flur/libe2e/FastLED/power_mgt.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/noise.cpp:2: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/noise.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/power_mgt.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/power_mgt.cpp:2: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/power_mgt.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Compiling .pioenvs/esp32-flur/libe2e/FastLED/wiring.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/wiring.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ Compiling .pioenvs/esp32-flur/src/esphome/components/api/api_connection.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/wiring.cpp:2: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from .piolibdeps/esp32-flur/FastLED/wiring.cpp:2: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Compiling .pioenvs/esp32-flur/src/esphome/components/api/api_frame_helper.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/api/api_pb2.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/api/api_pb2_service.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/api/api_server.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/api/list_entities.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/api/proto.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/api/subscribe_state.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/api/user_services.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/binary_sensor/automation.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/binary_sensor/binary_sensor.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/binary_sensor/filter.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/ble_presence/ble_presence_device.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/ble_rssi/ble_rssi_sensor.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/captive_portal/captive_portal.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/esp32/core.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/esp32/gpio.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/esp32/preferences.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/esp32_ble/ble.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/esp32_ble/ble_advertising.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/esp32_ble/ble_uuid.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/fastled_base/fastled_light.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome/components/fastled_base/fastled_light.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome/components/fastled_base/fastled_light.cpp:3: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome/components/fastled_base/fastled_light.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Compiling .pioenvs/esp32-flur/src/esphome/components/gpio/binary_sensor/gpio_binary_sensor.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/json/json_util.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/addressable_light.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/automation.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/esp_color_correction.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/esp_hsv_color.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/esp_range_view.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/light_call.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/light_json_schema.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/light_output.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/light/light_state.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/logger/logger.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/md5/md5.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/mdns/mdns_component.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/mdns/mdns_esp32.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/mdns/mdns_esp8266.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/mdns/mdns_rp2040.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/network/util.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/ota/ota_backend_arduino_esp32.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/ota/ota_backend_arduino_esp8266.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/ota/ota_backend_arduino_rp2040.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/ota/ota_backend_esp_idf.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/ota/ota_component.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/script/script.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/sensor/automation.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/sensor/filter.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/sensor/sensor.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/socket/bsd_sockets_impl.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/socket/lwip_raw_tcp_impl.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/socket/socket.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/web_server/list_entities.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/web_server/web_server.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/web_server_base/web_server_base.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/wifi/wifi_component.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/wifi/wifi_component_esp32_arduino.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/wifi/wifi_component_esp8266.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/wifi/wifi_component_esp_idf.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/components/wifi/wifi_component_pico_w.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/application.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/color.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/component.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/component_iterator.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/controller.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/entity_base.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/helpers.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/log.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/scheduler.cpp.o Compiling .pioenvs/esp32-flur/src/esphome/core/util.cpp.o Compiling .pioenvs/esp32-flur/src/main.cpp.o Building .pioenvs/esp32-flur/bootloader.bin Creating esp32 image... Successfully created esp32 image. Generating partitions .pioenvs/esp32-flur/partitions.bin In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:95, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr.h:8:2: warning: #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead [-Wcpp] #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead ^~~~~~~ Compiling .pioenvs/esp32-flur/lib980/AsyncTCP-esphome/AsyncTCP.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In member function 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int)': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:52: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ^ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Archiving .pioenvs/esp32-flur/lib980/libAsyncTCP-esphome.a Indexing .pioenvs/esp32-flur/lib980/libAsyncTCP-esphome.a Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFi.cpp.o In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h: In instantiation of 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startOnChannel(int) [with int DATA_PIN = 27; int T1 = 72; int T2 = 72; int T3 = 144; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 5]': .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:381:26: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::startNext(int) [with int DATA_PIN = 27; int T1 = 72; int T2 = 72; int T3 = 144; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 5]' .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:312:26: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with int DATA_PIN = 27; int T1 = 72; int T2 = 72; int T3 = 144; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 5]' .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:283:18: required from here .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:20: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:20: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:20: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:399:20: warning: 'esp_err_t rmt_set_pin(rmt_channel_t, rmt_mode_t, gpio_num_t)' is deprecated: use rmt_set_gpio instead [-Wdeprecated-declarations] rmt_set_pin(mRMT_channel, RMT_MODE_TX, mPin); ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/clockless_rmt_esp32.h:97, from .piolibdeps/esp32-flur/FastLED/platforms/esp/32/fastled_esp32.h:8, from .piolibdeps/esp32-flur/FastLED/platforms.h:36, from .piolibdeps/esp32-flur/FastLED/FastLED.h:52, from src/esphome/components/fastled_base/fastled_light.h:16, from src/esphome.h:31, from src/main.cpp:3: /home/iobroker/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/rmt.h:930:11: note: declared here esp_err_t rmt_set_pin(rmt_channel_t channel, rmt_mode_t mode, gpio_num_t gpio_num) ^~~~~~~~~~~ Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiAP.cpp.o Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiClient.cpp.o Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiGeneric.cpp.o Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiMulti.cpp.o Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiSTA.cpp.o Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiScan.cpp.o Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiServer.cpp.o Compiling .pioenvs/esp32-flur/libe58/WiFi/WiFiUdp.cpp.o Compiling .pioenvs/esp32-flur/lib6b5/FS/FS.cpp.o Archiving .pioenvs/esp32-flur/libe58/libWiFi.a Indexing .pioenvs/esp32-flur/libe58/libWiFi.a Compiling .pioenvs/esp32-flur/lib6b5/FS/vfs_api.cpp.o Compiling .pioenvs/esp32-flur/liba54/Update/HttpsOTAUpdate.cpp.o Archiving .pioenvs/esp32-flur/lib6b5/libFS.a Indexing .pioenvs/esp32-flur/lib6b5/libFS.a Compiling .pioenvs/esp32-flur/liba54/Update/Updater.cpp.o Compiling .pioenvs/esp32-flur/lib306/ESPAsyncWebServer-esphome/AsyncEventSource.cpp.o Archiving .pioenvs/esp32-flur/liba54/libUpdate.a Indexing .pioenvs/esp32-flur/liba54/libUpdate.a Compiling .pioenvs/esp32-flur/lib306/ESPAsyncWebServer-esphome/AsyncWebSocket.cpp.o Compiling .pioenvs/esp32-flur/lib306/ESPAsyncWebServer-esphome/WebAuthentication.cpp.o Compiling .pioenvs/esp32-flur/lib306/ESPAsyncWebServer-esphome/WebHandlers.cpp.o Compiling .pioenvs/esp32-flur/lib306/ESPAsyncWebServer-esphome/WebRequest.cpp.o Compiling .pioenvs/esp32-flur/lib306/ESPAsyncWebServer-esphome/WebResponses.cpp.o Compiling .pioenvs/esp32-flur/lib306/ESPAsyncWebServer-esphome/WebServer.cpp.o Compiling .pioenvs/esp32-flur/lib57f/DNSServer/DNSServer.cpp.o Archiving .pioenvs/esp32-flur/lib306/libESPAsyncWebServer-esphome.a Indexing .pioenvs/esp32-flur/lib306/libESPAsyncWebServer-esphome.a Compiling .pioenvs/esp32-flur/lib8f2/ESPmDNS/ESPmDNS.cpp.o Archiving .pioenvs/esp32-flur/lib57f/libDNSServer.a Indexing .pioenvs/esp32-flur/lib57f/libDNSServer.a Compiling .pioenvs/esp32-flur/FrameworkArduino/Esp.cpp.o Archiving .pioenvs/esp32-flur/lib8f2/libESPmDNS.a Indexing .pioenvs/esp32-flur/lib8f2/libESPmDNS.a Compiling .pioenvs/esp32-flur/FrameworkArduino/FirmwareMSC.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/FunctionalInterrupt.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/HWCDC.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/HardwareSerial.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/IPAddress.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/IPv6Address.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/MD5Builder.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/Print.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/Stream.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/StreamString.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/Tone.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/USB.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/USBCDC.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/USBMSC.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/WMath.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/WString.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/base64.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/cbuf.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-adc.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-bt.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-cpu.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-dac.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-gpio.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-i2c-slave.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-i2c.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-ledc.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-matrix.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-misc.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-psram.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-rgb-led.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-rmt.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-sigmadelta.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-spi.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-time.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-timer.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-tinyusb.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-touch.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/esp32-hal-uart.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/firmware_msc_fat.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/libb64/cdecode.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/libb64/cencode.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/main.cpp.o Compiling .pioenvs/esp32-flur/FrameworkArduino/stdlib_noniso.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/wiring_pulse.c.o Compiling .pioenvs/esp32-flur/FrameworkArduino/wiring_shift.c.o Archiving .pioenvs/esp32-flur/libFrameworkArduino.a Indexing .pioenvs/esp32-flur/libFrameworkArduino.a Linking .pioenvs/esp32-flur/firmware.elf RAM: [== ] 16.3% (used 53336 bytes from 327680 bytes) Flash: [========= ] 87.6% (used 1607017 bytes from 1835008 bytes) Building .pioenvs/esp32-flur/firmware.bin Creating esp32 image... Successfully created esp32 image. esp32_create_combined_bin([".pioenvs/esp32-flur/firmware.bin"], [".pioenvs/esp32-flur/firmware.elf"]) Wrote 0x199bf0 bytes to file /opt/iobroker/iobroker-data/esphome.0/.esphome/build/esp32-flur/.pioenvs/esp32-flur/firmware-factory.bin, ready to flash to offset 0x0 ======================== [SUCCESS] Took 100.81 seconds ======================== INFO Successfully compiled program.Somit mein Ansatz um eine volle Funktion für das Zielsystem zu erreichen:
1: Aktuelles Backup erstellen
2: Das System komplett neu installieren (OS + Grundinstallation IObroker ohne weitere Adapter etc.)
3: In der BackItUp Datei "Iobroker" den esphome.0 Ordner löschen
4: Restore mittels Backitup inkl. der modifizierten Datei-> So sollte ohne Datenverlust lt. diesem Test etwas voll funktionales rauskommen
-
@dieter_p ,
also funktioniert es bei dir jetzt nach deinen Änderungen ?
Deine Konstellation ist ja speziell gewesen, ich denke ohne Änderung des Systems würde Backitup bei ESPHome funktionieren.jaein. Ich habe einen Weg auf der virtuellen Maschine gefunden wie ich mit den alten Daten zu einem voll funktionalen System komme.
Es gibt noch diverse Unterschiede wie zB dass ich dies auf Debian getestet hab, das Zielsystem aber Raspi OS ist.
Ich bin dennoch zuversichtlich, da ein 1:1 Restore des Backups auch ein Debian in eine Installation mit Problemen ergab, das aber nun funktioniert.
Ergänzend, wenn es wirklich "nur" an Resten im esphome.0 Verzeichnis gelegen hat, verstehe ich nicht warum das Löschen dieses Ordners für eine funktionale Neuinstallation nicht ausreicht, sondern ein komplettes Neusystem erforderlich ist. Aber mit dem offenen Fragezeichen kann man leben :)
Wie auch immer, das Zielsystem kann ich frühstens in 14tagen komplett neu aufsetzen und es dann wirklich testen. Zur Not, sollte es am Raspi OS scheitern, fliegt der RPI raus und ein Beelink mit Debian kommt ins Zielsystem.
Ob das nun ein individuelles Problem meiner Installation war oder ggf. immer bei solchen Migrationen (32->64Bit) diese Probleme auftreten, kann ich natürlich nicht beantworten.
Schön ist aber gelernt zu haben, wie man mit 7-zip die BackiTUp -Files direkt bearbeitet (esphome.0 Ordner löschen) und sie danach dennoch eingespielt bekommt.
Also ich bin optimistisch eine Lösung gefunden zu haben und Danke Euch recht herzlich für Support, Unterstützung und Mühe die ihr da reingesteckt habt :+1:
-
jaein. Ich habe einen Weg auf der virtuellen Maschine gefunden wie ich mit den alten Daten zu einem voll funktionalen System komme.
Es gibt noch diverse Unterschiede wie zB dass ich dies auf Debian getestet hab, das Zielsystem aber Raspi OS ist.
Ich bin dennoch zuversichtlich, da ein 1:1 Restore des Backups auch ein Debian in eine Installation mit Problemen ergab, das aber nun funktioniert.
Ergänzend, wenn es wirklich "nur" an Resten im esphome.0 Verzeichnis gelegen hat, verstehe ich nicht warum das Löschen dieses Ordners für eine funktionale Neuinstallation nicht ausreicht, sondern ein komplettes Neusystem erforderlich ist. Aber mit dem offenen Fragezeichen kann man leben :)
Wie auch immer, das Zielsystem kann ich frühstens in 14tagen komplett neu aufsetzen und es dann wirklich testen. Zur Not, sollte es am Raspi OS scheitern, fliegt der RPI raus und ein Beelink mit Debian kommt ins Zielsystem.
Ob das nun ein individuelles Problem meiner Installation war oder ggf. immer bei solchen Migrationen (32->64Bit) diese Probleme auftreten, kann ich natürlich nicht beantworten.
Schön ist aber gelernt zu haben, wie man mit 7-zip die BackiTUp -Files direkt bearbeitet (esphome.0 Ordner löschen) und sie danach dennoch eingespielt bekommt.
Also ich bin optimistisch eine Lösung gefunden zu haben und Danke Euch recht herzlich für Support, Unterstützung und Mühe die ihr da reingesteckt habt :+1:
Hallo Leute ,
also ich habe auch Probleme mit dem Adapter . Nach dem Umzug auf Bullseye wollte dieser zunächst nicht starten . Hatte ein Backup per Backitup gemacht und eingespielt. Nachdem ich dann nodejs von 16 auf 18 gebracht habe, ging der Adapter zwar, ich kann nun die Oberfläche nur nicht öffnen. Vorhandene Geräte einbinden kann ich und bekomme auch die Datenpunkte . Mehr ist jedoch nicht möglich . Gibt es hier Neuigkeiten ? Will nun nicht nochmal das ganze System aufsetzen .
Schönen Sonntag wünsche ich euch
-
Hallo Leute ,
also ich habe auch Probleme mit dem Adapter . Nach dem Umzug auf Bullseye wollte dieser zunächst nicht starten . Hatte ein Backup per Backitup gemacht und eingespielt. Nachdem ich dann nodejs von 16 auf 18 gebracht habe, ging der Adapter zwar, ich kann nun die Oberfläche nur nicht öffnen. Vorhandene Geräte einbinden kann ich und bekomme auch die Datenpunkte . Mehr ist jedoch nicht möglich . Gibt es hier Neuigkeiten ? Will nun nicht nochmal das ganze System aufsetzen .
Schönen Sonntag wünsche ich euch
Meldungen im LogFile?
-
Meldungen im LogFile?
esphome.0 2023-04-23 12:08:16.246 warn ESPHome Dashboard deactivated esphome.0 2023-04-23 12:08:16.219 error [dashboardProcess ERROR] esphome.0 2023-04-23 12:08:16.217 error [dashboardProcess ERROR] nopy: Permission denied esphome.0 2023-04-23 12:08:16.215 error [dashboardProcess ERROR] sh: 1:In den Einstellungen ist das Dashboard aber aktiviert …
-
esphome.0 2023-04-23 12:08:16.246 warn ESPHome Dashboard deactivated esphome.0 2023-04-23 12:08:16.219 error [dashboardProcess ERROR] esphome.0 2023-04-23 12:08:16.217 error [dashboardProcess ERROR] nopy: Permission denied esphome.0 2023-04-23 12:08:16.215 error [dashboardProcess ERROR] sh: 1:In den Einstellungen ist das Dashboard aber aktiviert …
-
Ich habe nopy nun unter /opt/ioBroker installiert . Nun spuckt mir der Adapter folgenden Logeintrag aus :
esphome.0 2023-04-23 13:43:23.498 error [dashboardProcess ERROR] Error: ENOENT: no such file or directory, lstat '/opt/iobroker/node_modules/iobroker.esphome/python_modules'Bin mit Linux nicht so sehr vertraut .
-
Ich habe nopy nun unter /opt/ioBroker installiert . Nun spuckt mir der Adapter folgenden Logeintrag aus :
esphome.0 2023-04-23 13:43:23.498 error [dashboardProcess ERROR] Error: ENOENT: no such file or directory, lstat '/opt/iobroker/node_modules/iobroker.esphome/python_modules'Bin mit Linux nicht so sehr vertraut .
@smarthome2020 sagte in ESPHome: Reinstallation aber wie?:
/opt/ioBroker
Das wird nicht da installiert. Schau ob es die Python Sperrdatei gibt, schieb die aus dem Weg und installiere den Adapter nochmal neu. Und dann die Rechte der Module wie oben prüfen.
-
@smarthome2020 sagte in ESPHome: Reinstallation aber wie?:
/opt/ioBroker
Das wird nicht da installiert. Schau ob es die Python Sperrdatei gibt, schieb die aus dem Weg und installiere den Adapter nochmal neu. Und dann die Rechte der Module wie oben prüfen.
wie finde ich heraus, ob es eine Sperrdatei gibt?
-
wie finde ich heraus, ob es eine Sperrdatei gibt?
Man muss die Sperrdatei EXTERNALLY-MANAGED kurz beiseite räumen:
sudo mv /usr/lib/python3.11/EXTERNALLY-MANAGED ~ iobroker add esphome --debug sudo mv ~/EXTERNALLY-MANAGED /usr/lib/python3.11/Statt python3.11 kann da auch ein Pfad mit deiner verwendeten Version in Frage kommen. Musst du auf deinem System schauen.
-
Man muss die Sperrdatei EXTERNALLY-MANAGED kurz beiseite räumen:
sudo mv /usr/lib/python3.11/EXTERNALLY-MANAGED ~ iobroker add esphome --debug sudo mv ~/EXTERNALLY-MANAGED /usr/lib/python3.11/Statt python3.11 kann da auch ein Pfad mit deiner verwendeten Version in Frage kommen. Musst du auf deinem System schauen.
unter cd/usr/lib/python3.9 findet sich bei mir keine Datei mit dem Namen EXTERNALLY-MANAGED. Wenn ich den Befehl von dir einfüge, findet er auch keine Datei. Scheinbar gibt es die Sperrdatei dann bei mir nicht?
-
unter cd/usr/lib/python3.9 findet sich bei mir keine Datei mit dem Namen EXTERNALLY-MANAGED. Wenn ich den Befehl von dir einfüge, findet er auch keine Datei. Scheinbar gibt es die Sperrdatei dann bei mir nicht?
Dann schau die Rechte an.
-
Dann schau die Rechte an.
Also wie genau kann ich nach Rechten schauen? Und für was soll ich mir die Rechte anschauen?
-
Hallo Leute ,
also ich habe auch Probleme mit dem Adapter . Nach dem Umzug auf Bullseye wollte dieser zunächst nicht starten . Hatte ein Backup per Backitup gemacht und eingespielt. Nachdem ich dann nodejs von 16 auf 18 gebracht habe, ging der Adapter zwar, ich kann nun die Oberfläche nur nicht öffnen. Vorhandene Geräte einbinden kann ich und bekomme auch die Datenpunkte . Mehr ist jedoch nicht möglich . Gibt es hier Neuigkeiten ? Will nun nicht nochmal das ganze System aufsetzen .
Schönen Sonntag wünsche ich euch
ls -la /opt/iobroker/node_modules/nopy/src/ -
ls -la /opt/iobroker/node_modules/nopy/src/Folgendes wird mir da dann ausgegeben:
total 2656 drwxrwxr-x+ 3 iobroker iobroker 4096 Apr 22 12:38 . drwxrwxr-x+ 4 iobroker iobroker 4096 Apr 22 12:38 .. -rwxrwxr-x+ 1 iobroker iobroker 7536 Apr 22 12:38 api.js -rwxrwxr-x+ 1 iobroker iobroker 2680354 Apr 22 12:39 get-pip.py -rwxrwxr-x+ 1 iobroker iobroker 530 Apr 22 12:38 nopenv.js -rwxrwxr-x+ 1 iobroker iobroker 397 Apr 22 12:38 nopy.js -rwxrwxr-x+ 1 iobroker iobroker 3091 Apr 22 12:38 npip.js drwxrwxr-x+ 2 iobroker iobroker 4096 Apr 22 12:39 test -rwxrwxr-x+ 1 iobroker iobroker 822 Apr 22 12:38 utils.js -
Folgendes wird mir da dann ausgegeben:
total 2656 drwxrwxr-x+ 3 iobroker iobroker 4096 Apr 22 12:38 . drwxrwxr-x+ 4 iobroker iobroker 4096 Apr 22 12:38 .. -rwxrwxr-x+ 1 iobroker iobroker 7536 Apr 22 12:38 api.js -rwxrwxr-x+ 1 iobroker iobroker 2680354 Apr 22 12:39 get-pip.py -rwxrwxr-x+ 1 iobroker iobroker 530 Apr 22 12:38 nopenv.js -rwxrwxr-x+ 1 iobroker iobroker 397 Apr 22 12:38 nopy.js -rwxrwxr-x+ 1 iobroker iobroker 3091 Apr 22 12:38 npip.js drwxrwxr-x+ 2 iobroker iobroker 4096 Apr 22 12:39 test -rwxrwxr-x+ 1 iobroker iobroker 822 Apr 22 12:38 utils.jsInstallier den Adapter nochmal neu.
-
Folgendes wird mir da dann ausgegeben:
total 2656 drwxrwxr-x+ 3 iobroker iobroker 4096 Apr 22 12:38 . drwxrwxr-x+ 4 iobroker iobroker 4096 Apr 22 12:38 .. -rwxrwxr-x+ 1 iobroker iobroker 7536 Apr 22 12:38 api.js -rwxrwxr-x+ 1 iobroker iobroker 2680354 Apr 22 12:39 get-pip.py -rwxrwxr-x+ 1 iobroker iobroker 530 Apr 22 12:38 nopenv.js -rwxrwxr-x+ 1 iobroker iobroker 397 Apr 22 12:38 nopy.js -rwxrwxr-x+ 1 iobroker iobroker 3091 Apr 22 12:38 npip.js drwxrwxr-x+ 2 iobroker iobroker 4096 Apr 22 12:39 test -rwxrwxr-x+ 1 iobroker iobroker 822 Apr 22 12:38 utils.jsUnd dann zeig mal einen Start des Adapters. Schaut bei mir so aus:
2023-04-23 14:57:21.204 - info: host.chet instance system.adapter.esphome.0 started with pid 1244918 2023-04-23 14:57:24.024 - info: esphome.0 (1244918) starting. Version 0.2.4 in /opt/iobroker/node_modules/iobroker.esphome, node: v18.16.0, js-controller: 5.0.1-alpha.0-20230418-efa3e809 2023-04-23 14:57:24.135 - info: esphome.0 (1244918) Auto Discovery startet, new devices (or IP changes) will be detected automatically 2023-04-23 14:57:24.144 - info: esphome.0 (1244918) Native Integration of ESPHome Dashboard enabled 2023-04-23 14:57:26.512 - info: esphome.0 (1244918) [ESPHome - Console] 2023-04-23 14:57:26,511 INFO Starting dashboard web server on http://0.0.0.0:6052 and configuration dir /opt/iobroker/iobroker-data/esphome.0... -
Und dann zeig mal einen Start des Adapters. Schaut bei mir so aus:
2023-04-23 14:57:21.204 - info: host.chet instance system.adapter.esphome.0 started with pid 1244918 2023-04-23 14:57:24.024 - info: esphome.0 (1244918) starting. Version 0.2.4 in /opt/iobroker/node_modules/iobroker.esphome, node: v18.16.0, js-controller: 5.0.1-alpha.0-20230418-efa3e809 2023-04-23 14:57:24.135 - info: esphome.0 (1244918) Auto Discovery startet, new devices (or IP changes) will be detected automatically 2023-04-23 14:57:24.144 - info: esphome.0 (1244918) Native Integration of ESPHome Dashboard enabled 2023-04-23 14:57:26.512 - info: esphome.0 (1244918) [ESPHome - Console] 2023-04-23 14:57:26,511 INFO Starting dashboard web server on http://0.0.0.0:6052 and configuration dir /opt/iobroker/iobroker-data/esphome.0...@thomas-braun
Ich kann ihn nun gar nicht mehr installieren:$ iobroker add esphome --host raspberrypi NPM version: 9.5.1 Installing iobroker.esphome@0.2.4... (System call) host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1 ERROR: Process exited with code 25 -
@thomas-braun
Ich kann ihn nun gar nicht mehr installieren:$ iobroker add esphome --host raspberrypi NPM version: 9.5.1 Installing iobroker.esphome@0.2.4... (System call) host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1 ERROR: Process exited with code 25@smarthome2020 sagte in ESPHome: Reinstallation aber wie?:
iobroker add esphome --host raspberrypi --debug -
@smarthome2020 sagte in ESPHome: Reinstallation aber wie?:
iobroker add esphome --host raspberrypi --debugnpm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/iobroker.esphome npm ERR! command failed npm ERR! command sh -c npip install npm ERR! No python_modules directory; installing pip locally if needed. npm ERR! Successfully completed pip check. npm ERR! Collecting esphome>=2021.8 npm ERR! Using cached esphome-2023.4.0-py2.py3-none-any.whl (2.6 MB) npm ERR! Collecting tornado>=3.2 npm ERR! Using cached tornado-6.3.1.tar.gz (508 kB) npm ERR! Installing build dependencies: started npm ERR! Installing build dependencies: finished with status 'done' npm ERR! Getting requirements to build wheel: started npm ERR! Getting requirements to build wheel: finished with status 'done' npm ERR! Preparing metadata (pyproject.toml): started npm ERR! Preparing metadata (pyproject.toml): finished with status 'done' npm ERR! Collecting voluptuous==0.13.1 (from esphome>=2021.8) npm ERR! Using cached voluptuous-0.13.1-py3-none-any.whl (29 kB) npm ERR! Collecting PyYAML==6.0 (from esphome>=2021.8) npm ERR! Using cached PyYAML-6.0.tar.gz (124 kB) npm ERR! Installing build dependencies: started npm ERR! Installing build dependencies: finished with status 'done' npm ERR! Getting requirements to build wheel: started npm ERR! Getting requirements to build wheel: finished with status 'done' npm ERR! Preparing metadata (pyproject.toml): started npm ERR! Preparing metadata (pyproject.toml): finished with status 'done' npm ERR! Collecting paho-mqtt==1.6.1 (from esphome>=2021.8) npm ERR! Using cached paho-mqtt-1.6.1.tar.gz (99 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting colorama==0.4.6 (from esphome>=2021.8) npm ERR! Using cached colorama-0.4.6-py2.py3-none-any.whl (25 kB) npm ERR! Collecting tornado>=3.2 npm ERR! Using cached tornado-6.2.tar.gz (504 kB) npm ERR! Installing build dependencies: started npm ERR! Installing build dependencies: finished with status 'done' npm ERR! Getting requirements to build wheel: started npm ERR! Getting requirements to build wheel: finished with status 'done' npm ERR! Preparing metadata (pyproject.toml): started npm ERR! Preparing metadata (pyproject.toml): finished with status 'done' npm ERR! Collecting tzlocal==4.2 (from esphome>=2021.8) npm ERR! Using cached tzlocal-4.2-py3-none-any.whl (19 kB) npm ERR! Collecting tzdata>=2021.1 (from esphome>=2021.8) npm ERR! Using cached tzdata-2023.3-py2.py3-none-any.whl (341 kB) npm ERR! Collecting pyserial==3.5 (from esphome>=2021.8) npm ERR! Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) npm ERR! Collecting platformio==6.1.6 (from esphome>=2021.8) npm ERR! Using cached platformio-6.1.6.tar.gz (236 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting esptool==4.5.1 (from esphome>=2021.8) npm ERR! Using cached esptool-4.5.1.tar.gz (252 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting click==8.1.3 (from esphome>=2021.8) npm ERR! Using cached click-8.1.3-py3-none-any.whl (96 kB) npm ERR! Collecting esphome-dashboard==20230214.0 (from esphome>=2021.8) npm ERR! Using cached esphome_dashboard-20230214.0-py3-none-any.whl (1.6 MB) npm ERR! Collecting aioesphomeapi==13.5.1 (from esphome>=2021.8) npm ERR! Using cached aioesphomeapi-13.5.1-py2.py3-none-any.whl (54 kB) npm ERR! Collecting zeroconf==0.56.0 (from esphome>=2021.8) npm ERR! Using cached zeroconf-0.56.0.tar.gz (140 kB) npm ERR! Installing build dependencies: started npm ERR! Installing build dependencies: finished with status 'done' npm ERR! Getting requirements to build wheel: started npm ERR! Getting requirements to build wheel: finished with status 'done' npm ERR! Preparing metadata (pyproject.toml): started npm ERR! Preparing metadata (pyproject.toml): finished with status 'done' npm ERR! Collecting kconfiglib==13.7.1 (from esphome>=2021.8) npm ERR! Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) npm ERR! Collecting protobuf>=3.19.0 (from aioesphomeapi==13.5.1->esphome>=2021.8) npm ERR! Using cached protobuf-4.22.3-py3-none-any.whl (172 kB) npm ERR! Collecting noiseprotocol<1.0,>=0.3.1 (from aioesphomeapi==13.5.1->esphome>=2021.8) npm ERR! Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) npm ERR! Collecting async-timeout>=4.0 (from aioesphomeapi==13.5.1->esphome>=2021.8) npm ERR! Using cached async_timeout-4.0.2-py3-none-any.whl (5.8 kB) npm ERR! Collecting bitstring>=3.1.6 (from esptool==4.5.1->esphome>=2021.8) npm ERR! Using cached bitstring-4.0.2-py3-none-any.whl (46 kB) npm ERR! Collecting cryptography>=2.1.4 (from esptool==4.5.1->esphome>=2021.8) npm ERR! Using cached cryptography-40.0.2.tar.gz (625 kB) npm ERR! Installing build dependencies: started npm ERR! Installing build dependencies: finished with status 'error' npm ERR! /usr/bin/python3: No module named pip npm ERR! /usr/bin/python3: No module named ensurepip npm ERR! error: subprocess-exited-with-error npm ERR! npm ERR! × pip subprocess to install build dependencies did not run successfully. npm ERR! │ exit code: 1 npm ERR! ╰─> [81 lines of output] npm ERR! Collecting setuptools!=60.9.0,>=40.6.0 npm ERR! Using cached setuptools-67.7.1-py3-none-any.whl (1.1 MB) npm ERR! Collecting wheel npm ERR! Using cached wheel-0.40.0-py3-none-any.whl (64 kB) npm ERR! Collecting cffi>=1.12 npm ERR! Using cached cffi-1.15.1.tar.gz (508 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting setuptools-rust>=0.11.4 npm ERR! Using cached setuptools_rust-1.5.2-py3-none-any.whl (23 kB) npm ERR! Collecting pycparser (from cffi>=1.12) npm ERR! Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) npm ERR! Collecting semantic-version<3,>=2.8.2 (from setuptools-rust>=0.11.4) npm ERR! Using cached semantic_version-2.10.0-py2.py3-none-any.whl (15 kB) npm ERR! Collecting typing-extensions>=3.7.4.3 (from setuptools-rust>=0.11.4) npm ERR! Using cached typing_extensions-4.5.0-py3-none-any.whl (27 kB) npm ERR! Building wheels for collected packages: cffi npm ERR! Building wheel for cffi (setup.py): started npm ERR! Building wheel for cffi (setup.py): finished with status 'error' npm ERR! error: subprocess-exited-with-error npm ERR! npm ERR! × python setup.py bdist_wheel did not run successfully. npm ERR! │ exit code: 1 npm ERR! ╰─> [50 lines of output] npm ERR! /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:293: _DeprecatedConfig: Deprecated config in `setup.cfg` npm ERR! !! npm ERR! npm ERR! ******************************************************************************** npm ERR! The license_file parameter is deprecated, use license_files instead. npm ERR! npm ERR! By 2023-Oct-30, you need to update your project and remove deprecated calls npm ERR! or your builds will no longer be supported. npm ERR! npm ERR! See https://setuptools.pypa.io/en/latest/https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. npm ERR! ******************************************************************************** npm ERR! npm ERR! !! npm ERR! parsed = self.parsers.get(option_name, lambda x: x)(value) npm ERR! running bdist_wheel npm ERR! running build npm ERR! running build_py npm ERR! creating build npm ERR! creating build/lib.linux-aarch64-cpython-39 npm ERR! creating build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/lock.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/cparser.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/verifier.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/vengine_gen.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/backend_ctypes.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/vengine_cpy.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/setuptools_ext.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/error.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/cffi_opcode.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/__init__.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/model.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/pkgconfig.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/recompiler.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/api.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/ffiplatform.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/commontypes.py -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/_cffi_include.h -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/parse_c_type.h -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/_embedding.h -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! copying cffi/_cffi_errors.h -> build/lib.linux-aarch64-cpython-39/cffi npm ERR! running build_ext npm ERR! building '_cffi_backend' extension npm ERR! creating build/temp.linux-aarch64-cpython-39 npm ERR! creating build/temp.linux-aarch64-cpython-39/c npm ERR! arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-aarch64-cpython-39/c/_cffi_backend.o npm ERR! c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory npm ERR! 2 | #include <Python.h> npm ERR! | ^~~~~~~~~~ npm ERR! compilation terminated. npm ERR! error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 npm ERR! [end of output] npm ERR! npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! ERROR: Failed building wheel for cffi npm ERR! Running setup.py clean for cffi npm ERR! Failed to build cffi npm ERR! ERROR: Could not build wheels for cffi, which is required to install pyproject.toml-based projects npm ERR! [end of output] npm ERR! npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! error: subprocess-exited-with-error npm ERR! npm ERR! × pip subprocess to install build dependencies did not run successfully. npm ERR! │ exit code: 1 npm ERR! ╰─> See above for output. npm ERR! npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-04-23T13_12_46_529Z-debug-0.log host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1
803
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge