ESPHome: Reinstallation aber wie?

smarthome2020

Ich habe nopy nun unter /opt/ioBroker installiert . Nun spuckt mir der Adapter folgenden Logeintrag aus :

esphome.0
2023-04-23 13:43:23.498	error	[dashboardProcess ERROR] Error: ENOENT: no such file or directory, lstat '/opt/iobroker/node_modules/iobroker.esphome/python_modules'

Bin mit Linux nicht so sehr vertraut .

Thomas Braun

@smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

/opt/ioBroker

Das wird nicht da installiert. Schau ob es die Python Sperrdatei gibt, schieb die aus dem Weg und installiere den Adapter nochmal neu. Und dann die Rechte der Module wie oben prüfen.

smarthome2020

@thomas-braun

wie finde ich heraus, ob es eine Sperrdatei gibt?

Thomas Braun

@smarthome2020

Man muss die Sperrdatei EXTERNALLY-MANAGED kurz beiseite räumen:

sudo mv /usr/lib/python3.11/EXTERNALLY-MANAGED ~
iobroker add esphome --debug
sudo mv ~/EXTERNALLY-MANAGED /usr/lib/python3.11/

Statt python3.11 kann da auch ein Pfad mit deiner verwendeten Version in Frage kommen. Musst du auf deinem System schauen.

smarthome2020

@thomas-braun

unter cd/usr/lib/python3.9 findet sich bei mir keine Datei mit dem Namen EXTERNALLY-MANAGED. Wenn ich den Befehl von dir einfüge, findet er auch keine Datei. Scheinbar gibt es die Sperrdatei dann bei mir nicht?

Thomas Braun

@smarthome2020

Dann schau die Rechte an.

smarthome2020

@thomas-braun

Also wie genau kann ich nach Rechten schauen? Und für was soll ich mir die Rechte anschauen?

Thomas Braun

@smarthome2020

ls -la /opt/iobroker/node_modules/nopy/src/

smarthome2020

@thomas-braun

Folgendes wird mir da dann ausgegeben:

total 2656
drwxrwxr-x+ 3 iobroker iobroker    4096 Apr 22 12:38 .
drwxrwxr-x+ 4 iobroker iobroker    4096 Apr 22 12:38 ..
-rwxrwxr-x+ 1 iobroker iobroker    7536 Apr 22 12:38 api.js
-rwxrwxr-x+ 1 iobroker iobroker 2680354 Apr 22 12:39 get-pip.py
-rwxrwxr-x+ 1 iobroker iobroker     530 Apr 22 12:38 nopenv.js
-rwxrwxr-x+ 1 iobroker iobroker     397 Apr 22 12:38 nopy.js
-rwxrwxr-x+ 1 iobroker iobroker    3091 Apr 22 12:38 npip.js
drwxrwxr-x+ 2 iobroker iobroker    4096 Apr 22 12:39 test
-rwxrwxr-x+ 1 iobroker iobroker     822 Apr 22 12:38 utils.js

Thomas Braun

@smarthome2020

Installier den Adapter nochmal neu.

Thomas Braun

@smarthome2020

Und dann zeig mal einen Start des Adapters. Schaut bei mir so aus:

2023-04-23 14:57:21.204  - info: host.chet instance system.adapter.esphome.0 started with pid 1244918
2023-04-23 14:57:24.024  - info: esphome.0 (1244918) starting. Version 0.2.4 in /opt/iobroker/node_modules/iobroker.esphome, node: v18.16.0, js-controller: 5.0.1-alpha.0-20230418-efa3e809
2023-04-23 14:57:24.135  - info: esphome.0 (1244918) Auto Discovery startet, new devices (or IP changes) will be detected automatically
2023-04-23 14:57:24.144  - info: esphome.0 (1244918) Native Integration of ESPHome Dashboard enabled
2023-04-23 14:57:26.512  - info: esphome.0 (1244918) [ESPHome - Console] 2023-04-23 14:57:26,511 INFO Starting dashboard web server on http://0.0.0.0:6052 and configuration dir /opt/iobroker/iobroker-data/esphome.0...

smarthome2020

@thomas-braun
Ich kann ihn nun gar nicht mehr installieren:

$ iobroker add esphome --host raspberrypi

NPM version: 9.5.1

Installing iobroker.esphome@0.2.4... (System call)

host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1

ERROR: Process exited with code 25

Thomas Braun

@smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

iobroker add esphome --host raspberrypi --debug

smarthome2020

@thomas-braun

npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/iobroker.esphome
npm ERR! command failed
npm ERR! command sh -c npip install
npm ERR! No python_modules directory; installing pip locally if needed.
npm ERR! Successfully completed pip check.
npm ERR! Collecting esphome>=2021.8
npm ERR!   Using cached esphome-2023.4.0-py2.py3-none-any.whl (2.6 MB)
npm ERR! Collecting tornado>=3.2
npm ERR!   Using cached tornado-6.3.1.tar.gz (508 kB)
npm ERR!   Installing build dependencies: started
npm ERR!   Installing build dependencies: finished with status 'done'
npm ERR!   Getting requirements to build wheel: started
npm ERR!   Getting requirements to build wheel: finished with status 'done'
npm ERR!   Preparing metadata (pyproject.toml): started
npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
npm ERR! Collecting voluptuous==0.13.1 (from esphome>=2021.8)
npm ERR!   Using cached voluptuous-0.13.1-py3-none-any.whl (29 kB)
npm ERR! Collecting PyYAML==6.0 (from esphome>=2021.8)
npm ERR!   Using cached PyYAML-6.0.tar.gz (124 kB)
npm ERR!   Installing build dependencies: started
npm ERR!   Installing build dependencies: finished with status 'done'
npm ERR!   Getting requirements to build wheel: started
npm ERR!   Getting requirements to build wheel: finished with status 'done'
npm ERR!   Preparing metadata (pyproject.toml): started
npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
npm ERR! Collecting paho-mqtt==1.6.1 (from esphome>=2021.8)
npm ERR!   Using cached paho-mqtt-1.6.1.tar.gz (99 kB)
npm ERR!   Preparing metadata (setup.py): started
npm ERR!   Preparing metadata (setup.py): finished with status 'done'
npm ERR! Collecting colorama==0.4.6 (from esphome>=2021.8)
npm ERR!   Using cached colorama-0.4.6-py2.py3-none-any.whl (25 kB)
npm ERR! Collecting tornado>=3.2
npm ERR!   Using cached tornado-6.2.tar.gz (504 kB)
npm ERR!   Installing build dependencies: started
npm ERR!   Installing build dependencies: finished with status 'done'
npm ERR!   Getting requirements to build wheel: started
npm ERR!   Getting requirements to build wheel: finished with status 'done'
npm ERR!   Preparing metadata (pyproject.toml): started
npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
npm ERR! Collecting tzlocal==4.2 (from esphome>=2021.8)
npm ERR!   Using cached tzlocal-4.2-py3-none-any.whl (19 kB)
npm ERR! Collecting tzdata>=2021.1 (from esphome>=2021.8)
npm ERR!   Using cached tzdata-2023.3-py2.py3-none-any.whl (341 kB)
npm ERR! Collecting pyserial==3.5 (from esphome>=2021.8)
npm ERR!   Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB)
npm ERR! Collecting platformio==6.1.6 (from esphome>=2021.8)
npm ERR!   Using cached platformio-6.1.6.tar.gz (236 kB)
npm ERR!   Preparing metadata (setup.py): started
npm ERR!   Preparing metadata (setup.py): finished with status 'done'
npm ERR! Collecting esptool==4.5.1 (from esphome>=2021.8)
npm ERR!   Using cached esptool-4.5.1.tar.gz (252 kB)
npm ERR!   Preparing metadata (setup.py): started
npm ERR!   Preparing metadata (setup.py): finished with status 'done'
npm ERR! Collecting click==8.1.3 (from esphome>=2021.8)
npm ERR!   Using cached click-8.1.3-py3-none-any.whl (96 kB)
npm ERR! Collecting esphome-dashboard==20230214.0 (from esphome>=2021.8)
npm ERR!   Using cached esphome_dashboard-20230214.0-py3-none-any.whl (1.6 MB)
npm ERR! Collecting aioesphomeapi==13.5.1 (from esphome>=2021.8)
npm ERR!   Using cached aioesphomeapi-13.5.1-py2.py3-none-any.whl (54 kB)
npm ERR! Collecting zeroconf==0.56.0 (from esphome>=2021.8)
npm ERR!   Using cached zeroconf-0.56.0.tar.gz (140 kB)
npm ERR!   Installing build dependencies: started
npm ERR!   Installing build dependencies: finished with status 'done'
npm ERR!   Getting requirements to build wheel: started
npm ERR!   Getting requirements to build wheel: finished with status 'done'
npm ERR!   Preparing metadata (pyproject.toml): started
npm ERR!   Preparing metadata (pyproject.toml): finished with status 'done'
npm ERR! Collecting kconfiglib==13.7.1 (from esphome>=2021.8)
npm ERR!   Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB)
npm ERR! Collecting protobuf>=3.19.0 (from aioesphomeapi==13.5.1->esphome>=2021.8)
npm ERR!   Using cached protobuf-4.22.3-py3-none-any.whl (172 kB)
npm ERR! Collecting noiseprotocol<1.0,>=0.3.1 (from aioesphomeapi==13.5.1->esphome>=2021.8)
npm ERR!   Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB)
npm ERR! Collecting async-timeout>=4.0 (from aioesphomeapi==13.5.1->esphome>=2021.8)
npm ERR!   Using cached async_timeout-4.0.2-py3-none-any.whl (5.8 kB)
npm ERR! Collecting bitstring>=3.1.6 (from esptool==4.5.1->esphome>=2021.8)
npm ERR!   Using cached bitstring-4.0.2-py3-none-any.whl (46 kB)
npm ERR! Collecting cryptography>=2.1.4 (from esptool==4.5.1->esphome>=2021.8)
npm ERR!   Using cached cryptography-40.0.2.tar.gz (625 kB)
npm ERR!   Installing build dependencies: started
npm ERR!   Installing build dependencies: finished with status 'error'
npm ERR! /usr/bin/python3: No module named pip
npm ERR! /usr/bin/python3: No module named ensurepip
npm ERR!   error: subprocess-exited-with-error
npm ERR!
npm ERR!   × pip subprocess to install build dependencies did not run successfully.
npm ERR!   │ exit code: 1
npm ERR!   ╰─> [81 lines of output]
npm ERR!       Collecting setuptools!=60.9.0,>=40.6.0
npm ERR!         Using cached setuptools-67.7.1-py3-none-any.whl (1.1 MB)
npm ERR!       Collecting wheel
npm ERR!         Using cached wheel-0.40.0-py3-none-any.whl (64 kB)
npm ERR!       Collecting cffi>=1.12
npm ERR!         Using cached cffi-1.15.1.tar.gz (508 kB)
npm ERR!         Preparing metadata (setup.py): started
npm ERR!         Preparing metadata (setup.py): finished with status 'done'
npm ERR!       Collecting setuptools-rust>=0.11.4
npm ERR!         Using cached setuptools_rust-1.5.2-py3-none-any.whl (23 kB)
npm ERR!       Collecting pycparser (from cffi>=1.12)
npm ERR!         Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
npm ERR!       Collecting semantic-version<3,>=2.8.2 (from setuptools-rust>=0.11.4)
npm ERR!         Using cached semantic_version-2.10.0-py2.py3-none-any.whl (15 kB)
npm ERR!       Collecting typing-extensions>=3.7.4.3 (from setuptools-rust>=0.11.4)
npm ERR!         Using cached typing_extensions-4.5.0-py3-none-any.whl (27 kB)
npm ERR!       Building wheels for collected packages: cffi
npm ERR!         Building wheel for cffi (setup.py): started
npm ERR!         Building wheel for cffi (setup.py): finished with status 'error'
npm ERR!         error: subprocess-exited-with-error
npm ERR!
npm ERR!         × python setup.py bdist_wheel did not run successfully.
npm ERR!         │ exit code: 1
npm ERR!         ╰─> [50 lines of output]
npm ERR!             /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:293: _DeprecatedConfig: Deprecated config in `setup.cfg`
npm ERR!             !!
npm ERR!
npm ERR!                     ********************************************************************************
npm ERR!                     The license_file parameter is deprecated, use license_files instead.
npm ERR!
npm ERR!                     By 2023-Oct-30, you need to update your project and remove deprecated calls
npm ERR!                     or your builds will no longer be supported.
npm ERR!
npm ERR!                     See https://setuptools.pypa.io/en/latest/https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details.
npm ERR!                     ********************************************************************************
npm ERR!
npm ERR!             !!
npm ERR!               parsed = self.parsers.get(option_name, lambda x: x)(value)
npm ERR!             running bdist_wheel
npm ERR!             running build
npm ERR!             running build_py
npm ERR!             creating build
npm ERR!             creating build/lib.linux-aarch64-cpython-39
npm ERR!             creating build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/lock.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/cparser.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/verifier.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/vengine_gen.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/backend_ctypes.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/vengine_cpy.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/setuptools_ext.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/error.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/cffi_opcode.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/__init__.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/model.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/pkgconfig.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/recompiler.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/api.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/ffiplatform.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/commontypes.py -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/_cffi_include.h -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/parse_c_type.h -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/_embedding.h -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             copying cffi/_cffi_errors.h -> build/lib.linux-aarch64-cpython-39/cffi
npm ERR!             running build_ext
npm ERR!             building '_cffi_backend' extension
npm ERR!             creating build/temp.linux-aarch64-cpython-39
npm ERR!             creating build/temp.linux-aarch64-cpython-39/c
npm ERR!             arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-aarch64-cpython-39/c/_cffi_backend.o
npm ERR!             c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
npm ERR!                 2 | #include <Python.h>
npm ERR!                   |          ^~~~~~~~~~
npm ERR!             compilation terminated.
npm ERR!             error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1
npm ERR!             [end of output]
npm ERR!
npm ERR!         note: This error originates from a subprocess, and is likely not a problem with pip.
npm ERR!         ERROR: Failed building wheel for cffi
npm ERR!         Running setup.py clean for cffi
npm ERR!       Failed to build cffi
npm ERR!       ERROR: Could not build wheels for cffi, which is required to install pyproject.toml-based projects
npm ERR!       [end of output]
npm ERR!
npm ERR!   note: This error originates from a subprocess, and is likely not a problem with pip.
npm ERR! error: subprocess-exited-with-error
npm ERR!
npm ERR! × pip subprocess to install build dependencies did not run successfully.
npm ERR! │ exit code: 1
npm ERR! ╰─> See above for output.
npm ERR!
npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2023-04-23T13_12_46_529Z-debug-0.log
host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1

Thomas Braun

@smarthome2020

Da stimmt was mit der python-Installation noch nicht.

find "/usr/lib" -name "EXTERNALLY-MANAGED"

smarthome2020

@thomas-braun
auf den Befehl folgt bei mir gar nichts

Homoran

@smarthome2020 sagte in ESPHome: Reinstallation aber wie?:

@thomas-braun
auf den Befehl folgt bei mir gar nichts

immer alles zeigen!

Thomas Braun

@smarthome2020

python --version
apt policy python3 build-essential python-is-python3

smarthome2020

@thomas-braun

Ich kann dir die Ausgabe heute Abend zeigen. Muss nun zur Schwiegermutter . Nur Probleme heute 😂

Thomas Braun

@smarthome2020

cd /opt/iobroker
npm i nopy
sudo -u iobroker chmod ug+x /opt/iobroker/node_modules/nopy/src/n*

Dann nochmal eine übliche Installation des esphome versuchen.

Wenn der installiert wurde:

cd /opt/iobroker 
npm uninstall nopy

Community Forum

NEWS

ESPHome: Reinstallation aber wie?

Support us

850

32.4k

81.5k

1.3m