Test Adapter zigbee2mqtt
-
@ciddi89 said in Test Adapter zigbee2mqtt:
@biker1602 was fürn raspberry ist das? 0, 1 oder höher?
Raspi 4 ohne SD-Karte, sondern mit SSD Festplatte.
@biker1602 wie sieht die config aus?
sudo nano /etc/systemd/system/zigbee2mqtt.service -
@biker1602 wie sieht die config aus?
sudo nano /etc/systemd/system/zigbee2mqtt.service@ciddi89
[Unit] Description=zigbee2mqtt After=network.target [Service] ExecStart=/usr/local/bin/npm start WorkingDirectory=/opt/zigbee2mqtt StandardOutput=inherit # Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5) StandardError=inherit Restart=always RestartSec=10s User=pi [Install] WantedBy=multi-user.target -
@ciddi89
[Unit] Description=zigbee2mqtt After=network.target [Service] ExecStart=/usr/local/bin/npm start WorkingDirectory=/opt/zigbee2mqtt StandardOutput=inherit # Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5) StandardError=inherit Restart=always RestartSec=10s User=pi [Install] WantedBy=multi-user.target@biker1602 da fehlt eine Zeile.
[Unit] Description=zigbee2mqtt After=network.target [Service] Environment=NODE_ENV=production ExecStart=/usr/bin/npm start WorkingDirectory=/opt/zigbee2mqtt StandardOutput=inherit # Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5) StandardError=inherit Restart=always RestartSec=10s User=pi [Install] WantedBy=multi-user.targetDanach
sudo systemctl start zigbee2mqttUnd Ergebnis von
systemctl status zigbee2mqtt.service -
@biker1602 da fehlt eine Zeile.
[Unit] Description=zigbee2mqtt After=network.target [Service] Environment=NODE_ENV=production ExecStart=/usr/bin/npm start WorkingDirectory=/opt/zigbee2mqtt StandardOutput=inherit # Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5) StandardError=inherit Restart=always RestartSec=10s User=pi [Install] WantedBy=multi-user.targetDanach
sudo systemctl start zigbee2mqttUnd Ergebnis von
systemctl status zigbee2mqtt.service@ciddi89
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Tue Dec 20 08:45:59 2022 from 192.168.57.120 #pi@raspberrypi:~ $ sudo systemctl enable zigbee2mqtt.service pi@raspberrypi:~ $ sudo nano /etc/systemd/system/zigbee2mqtt.service pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units. pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units. ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:07:18 CET; 10s ago Process: 5532 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 5532 (code=exited, status=203/EXEC) pi@raspberrypi:~ $ -
@ciddi89
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Tue Dec 20 08:45:59 2022 from 192.168.57.120 #pi@raspberrypi:~ $ sudo systemctl enable zigbee2mqtt.service pi@raspberrypi:~ $ sudo nano /etc/systemd/system/zigbee2mqtt.service pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units. pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units. ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:07:18 CET; 10s ago Process: 5532 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 5532 (code=exited, status=203/EXEC) pi@raspberrypi:~ $@biker1602
Mach malsystemctl daemon-reloadUnd dann noch mal
sudo systemctl start zigbee2mqttUnd Ergebnis von
systemctl status zigbee2mqtt.service -
@biker1602
Mach malsystemctl daemon-reloadUnd dann noch mal
sudo systemctl start zigbee2mqttUnd Ergebnis von
systemctl status zigbee2mqtt.service@ciddi89 said in Test Adapter zigbee2mqtt:
systemctl daemon-reload
Authentication is required to reload the systemd state. Multiple identities can be used for authentication: 1. ,,, (pi) 2. root Choose identity to authenticate as (1-2): Failed to reload daemon: Method call timed outWas soll ich da nehmen 1 oder 2?
-
@ciddi89 said in Test Adapter zigbee2mqtt:
systemctl daemon-reload
Authentication is required to reload the systemd state. Multiple identities can be used for authentication: 1. ,,, (pi) 2. root Choose identity to authenticate as (1-2): Failed to reload daemon: Method call timed outWas soll ich da nehmen 1 oder 2?
@biker1602 pi
-
@ciddi89 wenn das nicht geht dann mit sudo. Hatte ich vergessen.
sudo systemctl daemon-reload -
@ciddi89 wenn das nicht geht dann mit sudo. Hatte ich vergessen.
sudo systemctl daemon-reload@ciddi89
pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:21:49 CET; 7s ago Process: 7179 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 7179 (code=exited, status=203/EXEC) pi@raspberrypi:~ $ -
@ciddi89
pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:21:49 CET; 7s ago Process: 7179 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 7179 (code=exited, status=203/EXEC) pi@raspberrypi:~ $@biker1602 vielleicht bist du zu schnell 😬 da steht noch activating. Mach jetzt noch mal
systemctl status zigbee2mqtt.service -
@biker1602 vielleicht bist du zu schnell 😬 da steht noch activating. Mach jetzt noch mal
systemctl status zigbee2mqtt.service@ciddi89
pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor pres Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09 Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC Main PID: 8239 (code=exited, status=203/EXEC) lines 1-5/5 (END) ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:29:51 CET; 3s ago Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 8239 (code=exited, status=203/EXEC) -
@biker1602 vielleicht bist du zu schnell 😬 da steht noch activating. Mach jetzt noch mal
systemctl status zigbee2mqtt.service -
@biker1602 ja irgendwie startet er den Dienst nicht. Vielleicht weiß @IdleBit noch was 🤔
-
@ciddi89
pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor pres Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09 Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC Main PID: 8239 (code=exited, status=203/EXEC) lines 1-5/5 (END) ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:29:51 CET; 3s ago Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 8239 (code=exited, status=203/EXEC)@biker1602 sagte in Test Adapter zigbee2mqtt:
ExecStart=/usr/local/bin/npm start
liegt das denn in dem Pfad?
-
@ciddi89
pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor pres Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09 Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC Main PID: 8239 (code=exited, status=203/EXEC) lines 1-5/5 (END) ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:29:51 CET; 3s ago Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 8239 (code=exited, status=203/EXEC)Nodejs./npm-Installation prüfen.
Da scheinen mal wieder die falschen Pfade vorzuliegen (ergo falsch installiert). -
Nodejs./npm-Installation prüfen.
Da scheinen mal wieder die falschen Pfade vorzuliegen (ergo falsch installiert). -
@thomas-braun
Behebt er das mit dem Fixer?Nein, der Fixer behebt keine krumme Installation von nodejs.
Status jetzt ist?
Mitsudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null uname -m && test -f /opt/scripts/.docker_config/.thisisdocker && echo "Docker-Installation" || echo "Kein Docker" && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && echo $XDG_SESSION_TYPE && echo $DESKTOP_SESSION && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejsnachschauen.
-
@biker1602 sagte in Test Adapter zigbee2mqtt:
ExecStart=/usr/local/bin/npm start
liegt das denn in dem Pfad?
@crunchip said in Test Adapter zigbee2mqtt:
@biker1602 sagte in Test Adapter zigbee2mqtt:
ExecStart=/usr/local/bin/npm start
liegt das denn in dem Pfad?
Ich bin eben mal mit WinSCP auf das Verzeichnis gegangen und unter
/usr/local/bin ist nichts drin -
Nein, der Fixer behebt keine krumme Installation von nodejs.
Status jetzt ist?
Mitsudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null uname -m && test -f /opt/scripts/.docker_config/.thisisdocker && echo "Docker-Installation" || echo "Kein Docker" && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && echo $XDG_SESSION_TYPE && echo $DESKTOP_SESSION && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejsnachschauen.
pi@raspberrypi:/opt/zigbee2mqtt $ sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null pi@raspberrypi:/opt/zigbee2mqtt $ uname -m && test -f /opt/scripts/.docker_config/.thisisdocker && echo "Docker-Installation" || echo "Kein Docker" && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && echo $XDG_SESSION_TYPE && echo $DESKTOP_SESSION && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs armv7l Kein Docker /usr/bin/nodejs /usr/bin/node /usr/bin/npm v16.19.0 v16.19.0 8.19.3 4.0.23 pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker tty /opt/zigbee2mqtt Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_16.x buster InRelease Reading package lists... Done Building dependency tree Reading state information... Done 97 packages can be upgraded. Run 'apt list --upgradable' to see them. nodejs: -
pi@raspberrypi:/opt/zigbee2mqtt $ sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null pi@raspberrypi:/opt/zigbee2mqtt $ uname -m && test -f /opt/scripts/.docker_config/.thisisdocker && echo "Docker-Installation" || echo "Kein Docker" && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && echo $XDG_SESSION_TYPE && echo $DESKTOP_SESSION && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs armv7l Kein Docker /usr/bin/nodejs /usr/bin/node /usr/bin/npm v16.19.0 v16.19.0 8.19.3 4.0.23 pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker tty /opt/zigbee2mqtt Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_16.x buster InRelease Reading package lists... Done Building dependency tree Reading state information... Done 97 packages can be upgraded. Run 'apt list --upgradable' to see them. nodejs:Das ist nicht vollständig, dein Betriebssystem ist tot und es stehen 97 Updates in der Pipeline.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
526
Online32.8k
Benutzer82.7k
Themen1.3m
Beiträge