Test Adapter zigbee2mqtt

biker1602

Zigbee2MQTT:info  2022-12-20 07:42:58: Logging to console and directory: '/opt/zigbee2mqtt/data/log/2022-12-20.07-42-57' filename: log.txt
Zigbee2MQTT:info  2022-12-20 07:42:58: Starting Zigbee2MQTT version 1.28.0 (commit #03ba647)
Zigbee2MQTT:info  2022-12-20 07:42:58: Starting zigbee-herdsman (0.14.62)
Zigbee2MQTT:info  2022-12-20 07:42:59: zigbee-herdsman started (resumed)
Zigbee2MQTT:info  2022-12-20 07:42:59: Coordinator firmware version: '{"meta":{"maintrel":3,"majorrel":2,"minorrel":6,"product":0,"revision":20190608,"transportrev":2},"type":"zStack12"}'
Zigbee2MQTT:info  2022-12-20 07:42:59: Currently 1 devices are joined:
Zigbee2MQTT:info  2022-12-20 07:42:59: IKEA Smart Home Button (0x84fd27fffe1f7496): E1524/E1810 - IKEA TRADFRI remote control (EndDevice)
Zigbee2MQTT:info  2022-12-20 07:42:59: Zigbee: disabling joining new devices.
Zigbee2MQTT:info  2022-12-20 07:42:59: Connecting to MQTT server at mqtt://localhost
Zigbee2MQTT:info  2022-12-20 07:42:59: Connected to MQTT server
Zigbee2MQTT:info  2022-12-20 07:42:59: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
Zigbee2MQTT:info  2022-12-20 07:42:59: MQTT publish: topic 'zigbee2mqtt/IKEA Smart Home Button/availability', payload '{"state":"online"}'
Zigbee2MQTT:info  2022-12-20 07:42:59: Started frontend on port 0.0.0.0:8080

Es sieht aber gar nicht so aus, als ob er richtig durchläuft, denn der Cursor bleibt links stehen.
Mich macht Zeile 13 stutzig

? Offline

@biker1602 das ist normal du musst noch ein deamon erstellen der die beim Start automatisch zigbee2mqtt startet. Siehe in der Doku: (Optional) Running as a daemon with systemctl

https://www.zigbee2mqtt.io/guide/installation/01_linux.html#optional-running-as-a-daemon-with-systemctl

biker1602

@ciddi89
Habe ich gemacht

pi@raspberrypi:~ $ sudo nano /etc/systemd/system/zigbee2mqtt.service
pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt
pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service
● zigbee2mqtt.service - zigbee2mqtt
   Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; disabled; vendor pre
   Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 08
  Process: 2304 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC
 Main PID: 2304 (code=exited, status=203/EXEC)
lines 1-5/5 (END)
● zigbee2mqtt.service - zigbee2mqtt
   Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; disabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 08:10:35 CET; 622ms ago
  Process: 2304 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC)
 Main PID: 2304 (code=exited, status=203/EXEC)

Aber wenn ich die Konsole schließe ist genau das gleiche Adapter mit gelbem Ausrufezeichen

? Offline

@biker1602 es fehlt noch

sudo systemctl enable zigbee2mqtt.service

Und danach ein Neustart

biker1602

@ciddi89 said in Test Adapter zigbee2mqtt:

@biker1602 es fehlt noch
sudo systemctl enable zigbee2mqtt.service
Und danach ein Neustart

Muss ich den Raspi komplett neu starten?

? Offline

@biker1602 wenn zigbee2mqtt nicht in einem Container läuft dann ja

biker1602

@ciddi89
Habe den Raspi neu gestartet aber kein Erfolg der Adapter bleibt gelb

Konsole gestartet
cd /opt/zigbee2mqtt
npm start

Adapter sofort grün

? Offline

@biker1602 was fürn raspberry ist das? 0, 1 oder höher?

biker1602

@ciddi89 said in Test Adapter zigbee2mqtt:

@biker1602 was fürn raspberry ist das? 0, 1 oder höher?

Raspi 4 ohne SD-Karte, sondern mit SSD Festplatte.

? Offline

@biker1602 wie sieht die config aus?

sudo nano /etc/systemd/system/zigbee2mqtt.service

biker1602

@ciddi89

[Unit]
Description=zigbee2mqtt
After=network.target

[Service]
ExecStart=/usr/local/bin/npm start
WorkingDirectory=/opt/zigbee2mqtt
StandardOutput=inherit
# Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5)
StandardError=inherit
Restart=always
RestartSec=10s
User=pi

[Install]
WantedBy=multi-user.target

? Offline

@biker1602 da fehlt eine Zeile.

[Unit]
Description=zigbee2mqtt
After=network.target

[Service]
Environment=NODE_ENV=production
ExecStart=/usr/bin/npm start
WorkingDirectory=/opt/zigbee2mqtt
StandardOutput=inherit
# Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5)
StandardError=inherit
Restart=always
RestartSec=10s
User=pi

[Install]
WantedBy=multi-user.target

Danach

sudo systemctl start zigbee2mqtt

Und Ergebnis von

systemctl status zigbee2mqtt.service

biker1602

@ciddi89

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Dec 20 08:45:59 2022 from 192.168.57.120
#pi@raspberrypi:~ $ sudo systemctl enable zigbee2mqtt.service
pi@raspberrypi:~ $ sudo nano /etc/systemd/system/zigbee2mqtt.service
pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt
Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units.
pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service
Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units.
● zigbee2mqtt.service - zigbee2mqtt
   Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:07:18 CET; 10s ago
  Process: 5532 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC)
 Main PID: 5532 (code=exited, status=203/EXEC)
pi@raspberrypi:~ $

? Offline

@biker1602
Mach mal

systemctl daemon-reload

Und dann noch mal

sudo systemctl start zigbee2mqtt

Und Ergebnis von

systemctl status zigbee2mqtt.service

biker1602

@ciddi89 said in Test Adapter zigbee2mqtt:

systemctl daemon-reload

Authentication is required to reload the systemd state.
Multiple identities can be used for authentication:
 1.  ,,, (pi)
 2.  root
Choose identity to authenticate as (1-2): Failed to reload daemon: Method call timed out

Was soll ich da nehmen 1 oder 2?

? Offline

@biker1602 pi

? Offline

@ciddi89 wenn das nicht geht dann mit sudo. Hatte ich vergessen.

sudo systemctl daemon-reload

biker1602

@ciddi89

pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt
pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service
● zigbee2mqtt.service - zigbee2mqtt
   Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:21:49 CET; 7s ago
  Process: 7179 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC)
 Main PID: 7179 (code=exited, status=203/EXEC)
pi@raspberrypi:~ $

? Offline

@biker1602 vielleicht bist du zu schnell 😬 da steht noch activating. Mach jetzt noch mal

systemctl status zigbee2mqtt.service

biker1602

@ciddi89

pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service
● zigbee2mqtt.service - zigbee2mqtt
   Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor pres
   Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09
  Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC
 Main PID: 8239 (code=exited, status=203/EXEC)
lines 1-5/5 (END)
● zigbee2mqtt.service - zigbee2mqtt
   Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:29:51 CET; 3s ago
  Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC)
 Main PID: 8239 (code=exited, status=203/EXEC)

Community Forum

NEWS

Test Adapter zigbee2mqtt

Support us

846

32.4k

81.5k

1.3m