Test Adapter zigbee2mqtt
-
@biker1602 das ist normal du musst noch ein deamon erstellen der die beim Start automatisch zigbee2mqtt startet. Siehe in der Doku: (Optional) Running as a daemon with systemctl
-
@ciddi89
Habe ich gemachtpi@raspberrypi:~ $ sudo nano /etc/systemd/system/zigbee2mqtt.service pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; disabled; vendor pre Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 08 Process: 2304 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC Main PID: 2304 (code=exited, status=203/EXEC) lines 1-5/5 (END) ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; disabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 08:10:35 CET; 622ms ago Process: 2304 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 2304 (code=exited, status=203/EXEC)Aber wenn ich die Konsole schließe ist genau das gleiche Adapter mit gelbem Ausrufezeichen
-
-
@ciddi89 said in Test Adapter zigbee2mqtt:
@biker1602 es fehlt noch
sudo systemctl enable zigbee2mqtt.serviceUnd danach ein Neustart
Muss ich den Raspi komplett neu starten?
-
@biker1602 wenn zigbee2mqtt nicht in einem Container läuft dann ja
-
@ciddi89
Habe den Raspi neu gestartet aber kein Erfolg der Adapter bleibt gelbKonsole gestartet
cd /opt/zigbee2mqtt
npm startAdapter sofort grün
-
@biker1602 was fürn raspberry ist das? 0, 1 oder höher?
-
@ciddi89 said in Test Adapter zigbee2mqtt:
@biker1602 was fürn raspberry ist das? 0, 1 oder höher?
Raspi 4 ohne SD-Karte, sondern mit SSD Festplatte.
-
@biker1602 wie sieht die config aus?
sudo nano /etc/systemd/system/zigbee2mqtt.service -
@ciddi89
[Unit] Description=zigbee2mqtt After=network.target [Service] ExecStart=/usr/local/bin/npm start WorkingDirectory=/opt/zigbee2mqtt StandardOutput=inherit # Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5) StandardError=inherit Restart=always RestartSec=10s User=pi [Install] WantedBy=multi-user.target -
@biker1602 da fehlt eine Zeile.
[Unit] Description=zigbee2mqtt After=network.target [Service] Environment=NODE_ENV=production ExecStart=/usr/bin/npm start WorkingDirectory=/opt/zigbee2mqtt StandardOutput=inherit # Or use StandardOutput=null if you don't want Zigbee2MQTT messages filling syslog, for more options see systemd.exec(5) StandardError=inherit Restart=always RestartSec=10s User=pi [Install] WantedBy=multi-user.targetDanach
sudo systemctl start zigbee2mqttUnd Ergebnis von
systemctl status zigbee2mqtt.service -
@ciddi89
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Tue Dec 20 08:45:59 2022 from 192.168.57.120 #pi@raspberrypi:~ $ sudo systemctl enable zigbee2mqtt.service pi@raspberrypi:~ $ sudo nano /etc/systemd/system/zigbee2mqtt.service pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units. pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service Warning: The unit file, source configuration file or drop-ins of zigbee2mqtt.service changed on disk. Run 'systemctl daemon-reload' to reload units. ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:07:18 CET; 10s ago Process: 5532 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 5532 (code=exited, status=203/EXEC) pi@raspberrypi:~ $ -
@biker1602
Mach malsystemctl daemon-reloadUnd dann noch mal
sudo systemctl start zigbee2mqttUnd Ergebnis von
systemctl status zigbee2mqtt.service -
@ciddi89 said in Test Adapter zigbee2mqtt:
systemctl daemon-reload
Authentication is required to reload the systemd state. Multiple identities can be used for authentication: 1. ,,, (pi) 2. root Choose identity to authenticate as (1-2): Failed to reload daemon: Method call timed outWas soll ich da nehmen 1 oder 2?
-
@biker1602 pi
-
@ciddi89 wenn das nicht geht dann mit sudo. Hatte ich vergessen.
sudo systemctl daemon-reload -
@ciddi89
pi@raspberrypi:~ $ sudo systemctl start zigbee2mqtt pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:21:49 CET; 7s ago Process: 7179 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 7179 (code=exited, status=203/EXEC) pi@raspberrypi:~ $ -
@biker1602 vielleicht bist du zu schnell
da steht noch activating. Mach jetzt noch malsystemctl status zigbee2mqtt.service -
@ciddi89
pi@raspberrypi:~ $ systemctl status zigbee2mqtt.service ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor pres Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09 Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC Main PID: 8239 (code=exited, status=203/EXEC) lines 1-5/5 (END) ● zigbee2mqtt.service - zigbee2mqtt Loaded: loaded (/etc/systemd/system/zigbee2mqtt.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2022-12-20 09:29:51 CET; 3s ago Process: 8239 ExecStart=/usr/local/bin/npm start (code=exited, status=203/EXEC) Main PID: 8239 (code=exited, status=203/EXEC) -
@ciddi89
Bin mal kurz weg
