BLE Adapter beleibt gelb
-
steckdose macht 5 Volt, 2,4 ampere
ist die Zigbee Dreifachsteckdose Sylvercrest von lidl
-
@smartverwalter Kenne ich nicht das Teil.
Keine Ahnung wie Stabil und sauber es die Spannung hält.
Was hast du eigentlich für einen PI? Sorry falls ich das überlesen habe,
-
pi@raspberrypi:~ $ dmesg -t Booting Linux on physical CPU 0x0 Linux version 5.10.17-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1403 SMP Mon Feb 22 11:29:51 GMT 2021 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 Memory policy: Data cache writealloc Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Zone ranges: DMA [mem 0x0000000000000000-0x000000003b3fffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x000000003b3fffff] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] On node 0 totalpages: 242688 DMA zone: 2133 pages used for memmap DMA zone: 0 pages reserved DMA zone: 242688 pages, LIFO batch:63 percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists, mobility grouping on. Total pages: 240555 Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=daa6e722-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 879832K/970752K available (9216K kernel code, 1311K rwdata, 2940K rodata, 1024K init, 860K bss, 25384K reserved, 65536K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 ftrace: allocating 31910 entries in 63 pages ftrace: allocated 63 pages with 6 groups rcu: Hierarchical RCU implementation. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=0 arch_timer: cp15 timer(s) running at 19.20MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns Switching to timer-based delay loop, resolution 52ns Console: colour dummy device 80x30 printk: console [tty1] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Disabling memory control group subsystem CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x10003c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 smp: Brought up 1 node, 4 CPUs SMP: Total of 4 processors activated (153.60 BogoMIPS). CPU: All CPU(s) started in HYP mode. CPU: Virtualization extensions available. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 1024 (order: 4, 65536 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 1024 KiB pool for atomic coherent allocations audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. Serial: AMBA PL011 UART driver bcm2835-mbox 3f00b880.mailbox: mailbox enabled raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:12:09, variant start raspberrypi-firmware soc:firmware: Firmware hash is 564e5f9b852b23a330b1764bcf0b2d022a20afd0 bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes, linear) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=18 bucket_order=4 zbud: loaded FS-Cache: Netfs 'nfs' registered for caching NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) io scheduler mq-deadline registered io scheduler kyber registered bcm2708_fb soc:fb: FB found 1 display(s) Console: switching to colour frame buffer device 82x26 bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 bcm2835-rng 3f104000.rng: hwrng registered vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. libphy: Fixed MDIO Bus: probed usbcore: registered new interface driver lan78xx usbcore: registered new interface driver smsc95xx dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Core Release: 2.80a Setting default values for core params Finished setting default values for core params Using Buffer DMA mode Periodic Transfer Interrupt Enhancement - disabled Multiprocessor Interrupt Enhancement - disabled OTG VER PARAM: 0, OTG VER FLAG: 0 Dedicated Tx FIFOs mode WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7514000 dma = 0xf7514000 len=9024 FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled dwc_otg: Microframe scheduler enabled WARN::hcd_init_fiq:457: FIQ on core 1 WARN::hcd_init_fiq:458: FIQ ASM at 807be568 length 36 WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 dwc_otg 3f980000.usb: DWC OTG Controller dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 Init: Port Power? op_state=1 Init: Power Port (0) usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: DWC OTG Controller usb usb1: Manufacturer: Linux 5.10.17-v7+ dwc_otg_hcd usb usb1: SerialNumber: 3f980000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected dwc_otg: FIQ enabled dwc_otg: NAK holdoff enabled dwc_otg: FIQ split-transaction FSM enabled Module dwc_common_port init usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs hid: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver Initializing XFRM netlink socket NET: Registered protocol family 17 Key type dns_resolver registered Registering SWP/SWPB emulation handler registered taskstats version 1 Loading compiled-in X.509 certificates Key type ._fscrypt registered Key type .fscrypt registered Key type fscrypt-provisioning registered uart-pl011 3f201000.serial: cts_event_workaround enabled 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 mmc-bcm2835 3f300000.mmcnr: DMA channel allocated sdhost: log_buf @ (ptrval) (f7513000) mmc1: queuing unknown CIS tuple 0x80 (2 bytes) mmc1: queuing unknown CIS tuple 0x80 (3 bytes) mmc1: queuing unknown CIS tuple 0x80 (3 bytes) mmc1: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) of_cfs_init of_cfs_init: OK Waiting for root device PARTUUID=daa6e722-02... Indeed it is in host mode hprt0 = 00021501 random: fast init done mmc0: host does not support reading read-only switch, assuming write-enable mmc1: new high speed SDIO card at address 0001 mmc0: new high speed SDHC card at address aaaa mmcblk0: mmc0:aaaa SB32G 29.7 GiB mmcblk0: p1 p2 EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem EXT4-fs (mmcblk0p2): write access will be enabled during recovery usb 1-1: new high-speed USB device number 2 using dwc_otg Indeed it is in host mode hprt0 = 00001101 usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1.1: new high-speed USB device number 3 using dwc_otg usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1.1:1.0: USB hub found hub 1-1.1:1.0: 3 ports detected usb 1-1.2: new full-speed USB device number 4 using dwc_otg usb 1-1.2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.2: Product: ConBee II usb 1-1.2: Manufacturer: dresden elektronik ingenieurtechnik GmbH usb 1-1.2: SerialNumber: DE2413713 EXT4-fs (mmcblk0p2): recovery complete EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 179:2. devtmpfs: mounted Freeing unused kernel memory: 1024K Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed libphy: lan78xx-mdiobus: probed systemd[1]: System time before build time, advancing clock. lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64 NET: Registered protocol family 10 Segment Routing with IPv6 systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture arm. systemd[1]: Set hostname to <raspberrypi>. random: systemd: uninitialized urandom read (16 bytes read) random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Reached target Swap. random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Listening on udev Kernel Socket. systemd[1]: Listening on udev Control Socket. systemd[1]: Listening on initctl Compatibility Named Pipe. systemd[1]: Listening on Journal Socket. systemd[1]: Starting Set the console keyboard layout... systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) usb 1-1.2: USB disconnect, device number 4 systemd-journald[121]: Received request to flush runtime journal from PID 1 usb 1-1.2: new full-speed USB device number 6 using dwc_otg usb 1-1.2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.2: Product: ConBee II usb 1-1.2: Manufacturer: dresden elektronik ingenieurtechnik GmbH usb 1-1.2: SerialNumber: DE2413713 vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_vc_sm_cma_probe: Videocore shared memory driver [vc_sm_connected_init]: start [vc_sm_connected_init]: installed successfully mc: Linux media interface: v0.10 snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. videodev: Linux video capture interface: v2.00 bcm2835_audio bcm2835_audio: card created with 8 channels bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 bcm2835-isp bcm2835-isp: Register output node 0 with media controller bcm2835-isp bcm2835-isp: Register capture node 1 with media controller bcm2835-isp bcm2835-isp: Register capture node 2 with media controller bcm2835-isp bcm2835-isp: Register capture node 3 with media controller bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. bcm2835-codec bcm2835-codec: Device registered as /dev/video10 bcm2835-codec bcm2835-codec: Loaded V4L2 decode bcm2835-codec bcm2835-codec: Device registered as /dev/video11 bcm2835-codec bcm2835-codec: Loaded V4L2 encode bcm2835-codec bcm2835-codec: Device registered as /dev/video12 bcm2835-codec bcm2835-codec: Loaded V4L2 isp cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' brcmfmac: F1 signature read @0x18000000=0x15264345 brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 usbcore: registered new interface driver brcmfmac brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2 brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e Under-voltage detected! (0x00050005) uart-pl011 3f201000.serial: no DMA platform data random: crng init done random: 7 urandom warning(s) missed due to ratelimiting Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS 8021q: 802.1Q VLAN Support v1.8 brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled 8021q: adding VLAN 0 to HW filter on device eth0 IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized pi@raspberrypi:~ $ -
systemctl status bluetooth systemctl status hciuart.service -
● bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset Active: inactive (dead) Docs: man:bluetoothd(8) ...skipping... ● bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset Active: inactive (dead) Docs: man:bluetoothd(8) -
@wendy2702 said in BLE Adapter beleibt gelb:
systemctl status hciuart.service
~ pi@raspberrypi:~ $ pi@raspberrypi:~ $ systemctl status hciuart.service ● hciuart.service - Configure Bluetooth Modems connected by UART Loaded: loaded (/lib/systemd/system/hciuart.service; enabled; vendor preset: Active: failed (Result: exit-code) since Sun 2021-03-07 17:20:59 CET; 57min a Process: 328 ExecStart=/usr/bin/btuart (code=exited, status=1/FAILURE) Mar 07 17:20:59 raspberrypi btuart[328]: Failed to set bdaddr, command failure Mar 07 17:20:59 raspberrypi btuart[328]: Failed to update baudrate, invalid HCI Mar 07 17:20:59 raspberrypi btuart[328]: Can't initialize device: Success Mar 07 17:20:59 raspberrypi btuart[328]: bcm43xx_init Mar 07 17:20:59 raspberrypi btuart[328]: Flash firmware /lib/firmware/brcm/BCM43 Mar 07 17:20:59 raspberrypi btuart[328]: Set BDADDR UART: b8:27:eb:33:de:ec Mar 07 17:20:59 raspberrypi btuart[328]: Set Controller UART speed to 3000000 bi Mar 07 17:20:59 raspberrypi systemd[1]: hciuart.service: Control process exited, Mar 07 17:20:59 raspberrypi systemd[1]: hciuart.service: Failed with result 'exi Mar 07 17:20:59 raspberrypi systemd[1]: Failed to start Configure Bluetooth Mode lines 1-15/15 (END) -
@smartverwalter Leider ist rechts das Log abgeschnitten.
sudo systemctl start bluetooth sudo systemctl status bluetooth sudo systemctl status hciuart -
upps
hatte die letze Nachricht gar nicht mehr gesehen.
Jetzt hab ich glaub ich noch grösseren Mist gebaut.
Habe für ein zweites Projekt noch einen pi gekauft,
eigentlich identisch.
Seitdem ich die SD Karte mal in den anderen PI getan habe
läßt sich Io Broker nicht mehr über html starten.
In beiden PI s nicht.
Die Karte scheint aber okay zu sein, auf die Dekonz Adapter sSoftware
kann ich zugreifen. -
iobroker status iobroker list adapters iobroker list instances -
pi@raspberrypi:~ $ iobroker status Cannot read system.config: null (OK when migrating or restoring) Cannot find view "system" for search "host" iobroker is running on this host. Objects type: file States type: file pi@raspberrypi:~ $ iobroker list adapters Cannot read system.config: null (OK when migrating or restoring) Cannot find view "system" for search "host" pi@raspberrypi:~ $ iobropker list instances -bash: iobropker: command not found pi@raspberrypi:~ $ pi@raspberrypi:~ $ iobroker status -bash: pi@raspberrypi:~: command not found pi@raspberrypi:~ $ Cannot read system.config: null (OK when migrating or restor ing) -bash: syntax error near unexpected token `(' pi@raspberrypi:~ $ Cannot find view "system" for search "host" -bash: Cannot: command not found pi@raspberrypi:~ $ iobroker is running on this host. iobroker [command] -
@smartverwalter
Aktuelles Backup zur Hand? -
pi@raspberrypi:~ $ iobroker list instances Cannot read system.config: null (OK when migrating or restoring) Cannot find view "system" for search "host" + instance is alive pi@raspberrypi:~ $ -
wenn er es nicht automatisch macht, dann leider nicht
-
@smartverwalter
Das ist ganz schlecht.
Und du hast nur die Karte von einem zum anderen System getragen? -
ich hatte vorher vergeblich versucht die android vis app zu installieren, aber danach lief er eigentlich noch
-
@smartverwalter
Immer ganz sauber herunter gefahren oder hart vom Strom genommen, die Kisten? (Oder noch schlimmer die Karte im laufenden System rausgerupft?) -
wenn dann nicht bewusst.
-
d.h neu installieren?
-
@smartverwalter sagte in BLE Adapter beleibt gelb:
wenn dann nicht bewusst.
Wenn man das schon nicht sicher ausschließen kann, dann wirds wohl das Beste sein Du machst das Ding neue und verwendest mal den Backitup Adapter, da der bei so was in ca. 30 Minuten alles wieder hat wie vorher. So lange gilt, kein Backup, kein Mitleid.
-
ich freu mich
okay vorher deinstallieren, oder einfach neu installieren?
