Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Ralf]

@Homoran Habe jetzt nochmal Schritt für Schritt eure Anleitung ausgeführt :

cd /opt/iobroker
iobroker backup (funktioniert nicht)

iobroker stop

curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -
sudo apt-get install -y nodejs

node -v (gibt die richtige Version aus)

npm rebuild

Dann weiter mit :
c) Reset aller Module in node_modules

cd /opt/iobroker
sudo rm -r node_modules/ (hier kommt die Abfrage nach löschen des Ordners nicht)

npm install iobroker.js-controller@1.5.11 --production

iobroker start

Ergebnis : Jetzt geht garnichts mehr

Ich hänge mal den gesamten Vorgang aus Putty an. Vielleicht könnte jemand da mal drüberschauen.
Ich weis jetzt absolut nicht weiter, danke euch schon mal für die Mühe.

Spoiler

login as: pi
pi@192.168.178.51's password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jun 7 09:49:03 2019 from ralf-pc.fritz.box
pi@raspberrypi:~ $ cd /opt/iobroker
pi@raspberrypi:/opt/iobroker $ iobroker backup
fs.js:114
throw err;
^

Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/iobroker.js-controller/backups'
at Object.mkdirSync (fs.js:757:3)
at states.getStates (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:225:61)
at StatesInMemory.getStates (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInMemServer.js:569:45)
at states.getKeys (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:211:24)
at StatesInMemory.getKeys (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInMemServer.js:727:45)
at objects.getObjectList (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:204:20)
at _getObjectList (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:2886:9)
at checkObjectRights (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:2912:28)
at checkObjectRights (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:1869:20)
at ObjectsInMemServer.getObjectList (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:2908:13)
pi@raspberrypi:/opt/iobroker $ iobroker stop
pi@raspberrypi:/opt/iobroker $ curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -

Installing the NodeSource Node.js 10.x repo...

Populating apt-get cache...

• apt-get update
  OK http://mirrordirector.raspbian.org jessie InRelease
  OK http://archive.raspberrypi.org jessie InRelease
  OK https://deb.nodesource.com jessie InRelease
  OK http://mirrordirector.raspbian.org jessie/main armhf Packages
  OK http://archive.raspberrypi.org jessie/main armhf Packages
  OK http://mirrordirector.raspbian.org jessie/contrib armhf Packages
  OK http://archive.raspberrypi.org jessie/ui armhf Packages
  OK http://mirrordirector.raspbian.org jessie/non-free armhf Packages
  OK https://deb.nodesource.com jessie/main Sources
  OK http://mirrordirector.raspbian.org jessie/rpi armhf Packages
  OK https://deb.nodesource.com jessie/main armhf Packages
  Holen: 1 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 2 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 3 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 4 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 5 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 6 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 7 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 8 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 9 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 10 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 11 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 12 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 13 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Ign https://deb.nodesource.com jessie/main Translation-de_DE
  Holen: 14 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Ign https://deb.nodesource.com jessie/main Translation-de
  Holen: 15 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Ign https://deb.nodesource.com jessie/main Translation-en
  Ign http://archive.raspberrypi.org jessie/main Translation-de_DE
  Ign http://archive.raspberrypi.org jessie/main Translation-de
  Ign http://archive.raspberrypi.org jessie/main Translation-en
  Ign http://archive.raspberrypi.org jessie/ui Translation-de_DE
  Ign http://archive.raspberrypi.org jessie/ui Translation-de
  Ign http://archive.raspberrypi.org jessie/ui Translation-en
  Ign http://mirrordirector.raspbian.org jessie/contrib Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/contrib Translation-de
  Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
  Ign http://mirrordirector.raspbian.org jessie/main Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/main Translation-de
  Ign http://mirrordirector.raspbian.org jessie/main Translation-en
  Ign http://mirrordirector.raspbian.org jessie/non-free Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/non-free Translation-de
  Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
  Ign http://mirrordirector.raspbian.org jessie/rpi Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/rpi Translation-de
  Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
  Paketlisten werden gelesen... Fertig

You seem to be using Devuan version jessie.

This maps to Debian "jessie"... Adjusting for you...

Confirming "jessie" is supported...

• curl -sLf -o /dev/null 'https://deb.nodesource.com/node_10.x/dists/jessie/Release'

Adding the NodeSource signing key to your keyring...

• curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | apt-key add -
  OK

Creating apt sources list file for the NodeSource Node.js 10.x repo...

• echo 'deb https://deb.nodesource.com/node_10.x jessie main' > /etc/apt/sources.list.d/nodesource.list
• echo 'deb-src https://deb.nodesource.com/node_10.x jessie main' >> /etc/apt/sources.list.d/nodesource.list

Running apt-get update for you...

• apt-get update
  OK http://mirrordirector.raspbian.org jessie InRelease
  OK http://archive.raspberrypi.org jessie InRelease
  OK https://deb.nodesource.com jessie InRelease
  OK http://mirrordirector.raspbian.org jessie/main armhf Packages
  OK http://archive.raspberrypi.org jessie/main armhf Packages
  OK http://mirrordirector.raspbian.org jessie/contrib armhf Packages
  OK http://archive.raspberrypi.org jessie/ui armhf Packages
  OK http://mirrordirector.raspbian.org jessie/non-free armhf Packages
  OK https://deb.nodesource.com jessie/main Sources
  OK https://deb.nodesource.com jessie/main armhf Packages
  OK http://mirrordirector.raspbian.org jessie/rpi armhf Packages
  Holen: 1 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 2 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 3 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 4 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 5 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 6 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 7 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 8 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 9 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 10 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Holen: 11 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Holen: 12 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Holen: 13 https://deb.nodesource.com jessie/main Translation-de_DE [162 B]
  Ign https://deb.nodesource.com jessie/main Translation-de_DE
  Holen: 14 https://deb.nodesource.com jessie/main Translation-de [162 B]
  Ign https://deb.nodesource.com jessie/main Translation-de
  Holen: 15 https://deb.nodesource.com jessie/main Translation-en [162 B]
  Ign https://deb.nodesource.com jessie/main Translation-en
  Ign http://archive.raspberrypi.org jessie/main Translation-de_DE
  Ign http://archive.raspberrypi.org jessie/main Translation-de
  Ign http://archive.raspberrypi.org jessie/main Translation-en
  Ign http://archive.raspberrypi.org jessie/ui Translation-de_DE
  Ign http://archive.raspberrypi.org jessie/ui Translation-de
  Ign http://archive.raspberrypi.org jessie/ui Translation-en
  Ign http://mirrordirector.raspbian.org jessie/contrib Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/contrib Translation-de
  Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
  Ign http://mirrordirector.raspbian.org jessie/main Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/main Translation-de
  Ign http://mirrordirector.raspbian.org jessie/main Translation-en
  Ign http://mirrordirector.raspbian.org jessie/non-free Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/non-free Translation-de
  Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
  Ign http://mirrordirector.raspbian.org jessie/rpi Translation-de_DE
  Ign http://mirrordirector.raspbian.org jessie/rpi Translation-de
  Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
  Paketlisten werden gelesen... Fertig

Run sudo apt-get install -y nodejs to install Node.js 10.x and npm

You may also need development tools to build native addons:

 sudo apt-get install gcc g++ make

To install the Yarn package manager, run:

 curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
 echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
 sudo apt-get update && sudo apt-get install yarn

pi@raspberrypi:/opt/iobroker $ sudo apt-get install -y nodejs
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
nodejs ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 227 nicht aktualisiert.
pi@raspberrypi:/opt/iobroker $ node -v
v10.16.0
pi@raspberrypi:/opt/iobroker $ npm rebuild

iobroker.js-controller@1.5.11 preinstall /opt/iobroker/node_modules/iobroker.js-controller
node lib/preinstallCheck.js

NPM version: 6.9.0
npm version >= 5: disabling package-lock

iobroker.js-controller@1.5.11 install /opt/iobroker/node_modules/iobroker.js-controller
node iobroker.js setup first

diskusage@0.2.6 install /opt/iobroker/node_modules/diskusage
node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/diskusage/build'
CXX(target) Release/obj.target/diskusage/src/main.o
../src/main.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetDiskUsage(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/main.cpp:26:71: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2891): Use Isolate version [-Wdeprecated-declarations]
DiskUsage result = GetDiskUsage(v8::String::Utf8Value(info[0]));
^
CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o
../src/diskusage_posix.cpp: In function ‘DiskUsage GetDiskUsage(const char)’:
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_bsize’ [-Wmissing-field-initializers]
struct statvfs info = {};
^
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_frsize’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_blocks’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_bfree’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_bavail’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_files’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_ffree’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_favail’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_fsid’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::__f_unused’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_flag’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_namemax’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::__f_spare’ [-Wmissing-field-initializers]
SOLINK_MODULE(target) Release/obj.target/diskusage.node
COPY Release/diskusage.node
make: Leaving directory '/opt/iobroker/node_modules/diskusage/build'

ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional
node rebuild.js

iobroker.js-controller@1.5.11 /opt/iobroker/node_modules/iobroker.js-controller
bluebird@3.5.5 /opt/iobroker/node_modules/bluebird
daemonize2@0.4.2 /opt/iobroker/node_modules/daemonize2
iobroker.admin@3.6.3 /opt/iobroker/node_modules/iobroker.js-controller/node_modules/iobroker.admin
@iobroker/adapter-core@1.0.3 /opt/iobroker/node_modules/@iobroker/adapter-core
@types/iobroker@1.4.11 /opt/iobroker/node_modules/@types/iobroker
@types/node@12.0.7 /opt/iobroker/node_modules/@types/node
body-parser@1.19.0 /opt/iobroker/node_modules/body-parser
bytes@3.1.0 /opt/iobroker/node_modules/bytes
content-type@1.0.4 /opt/iobroker/node_modules/content-type
debug@2.6.9 /opt/iobroker/node_modules/debug
ms@2.0.0 /opt/iobroker/node_modules/ms
depd@1.1.2 /opt/iobroker/node_modules/depd
http-errors@1.7.2 /opt/iobroker/node_modules/http-errors
inherits@2.0.3 /opt/iobroker/node_modules/inherits
setprototypeof@1.1.1 /opt/iobroker/node_modules/setprototypeof
statuses@1.5.0 /opt/iobroker/node_modules/statuses
toidentifier@1.0.0 /opt/iobroker/node_modules/toidentifier
iconv-lite@0.4.24 /opt/iobroker/node_modules/iconv-lite
safer-buffer@2.1.2 /opt/iobroker/node_modules/safer-buffer
on-finished@2.3.0 /opt/iobroker/node_modules/on-finished
ee-first@1.1.1 /opt/iobroker/node_modules/ee-first
qs@6.7.0 /opt/iobroker/node_modules/qs
raw-body@2.4.0 /opt/iobroker/node_modules/raw-body
unpipe@1.0.0 /opt/iobroker/node_modules/unpipe
type-is@1.6.18 /opt/iobroker/node_modules/type-is
media-typer@0.3.0 /opt/iobroker/node_modules/media-typer
mime-types@2.1.24 /opt/iobroker/node_modules/mime-types
mime-db@1.40.0 /opt/iobroker/node_modules/mime-db
connect-flash@0.1.1 /opt/iobroker/node_modules/connect-flash
cookie-parser@1.4.4 /opt/iobroker/node_modules/cookie-parser
cookie@0.3.1 /opt/iobroker/node_modules/cookie
cookie-signature@1.0.6 /opt/iobroker/node_modules/cookie-signature
express@4.17.1 /opt/iobroker/node_modules/express
accepts@1.3.7 /opt/iobroker/node_modules/accepts
negotiator@0.6.2 /opt/iobroker/node_modules/negotiator
array-flatten@1.1.1 /opt/iobroker/node_modules/array-flatten
content-disposition@0.5.3 /opt/iobroker/node_modules/content-disposition
safe-buffer@5.1.2 /opt/iobroker/node_modules/safe-buffer
cookie@0.4.0 /opt/iobroker/node_modules/express/node_modules/cookie
encodeurl@1.0.2 /opt/iobroker/node_modules/encodeurl
escape-html@1.0.3 /opt/iobroker/node_modules/escape-html
etag@1.8.1 /opt/iobroker/node_modules/etag
finalhandler@1.1.2 /opt/iobroker/node_modules/finalhandler
parseurl@1.3.3 /opt/iobroker/node_modules/parseurl
fresh@0.5.2 /opt/iobroker/node_modules/fresh
merge-descriptors@1.0.1 /opt/iobroker/node_modules/merge-descriptors
methods@1.1.2 /opt/iobroker/node_modules/methods
path-to-regexp@0.1.7 /opt/iobroker/node_modules/path-to-regexp
proxy-addr@2.0.5 /opt/iobroker/node_modules/proxy-addr
forwarded@0.1.2 /opt/iobroker/node_modules/forwarded
ipaddr.js@1.9.0 /opt/iobroker/node_modules/ipaddr.js
range-parser@1.2.1 /opt/iobroker/node_modules/range-parser
send@0.17.1 /opt/iobroker/node_modules/send
destroy@1.0.4 /opt/iobroker/node_modules/destroy
mime@1.6.0 /opt/iobroker/node_modules/mime
ms@2.1.1 /opt/iobroker/node_modules/send/node_modules/ms
serve-static@1.14.1 /opt/iobroker/node_modules/serve-static
utils-merge@1.0.1 /opt/iobroker/node_modules/utils-merge
vary@1.1.2 /opt/iobroker/node_modules/vary
express-fileupload@0.4.1 /opt/iobroker/node_modules/express-fileupload
busboy@0.2.14 /opt/iobroker/node_modules/busboy
dicer@0.2.5 /opt/iobroker/node_modules/dicer
readable-stream@1.1.14 /opt/iobroker/node_modules/readable-stream
core-util-is@1.0.2 /opt/iobroker/node_modules/core-util-is
isarray@0.0.1 /opt/iobroker/node_modules/isarray
string_decoder@0.10.31 /opt/iobroker/node_modules/string_decoder
streamsearch@0.1.2 /opt/iobroker/node_modules/streamsearch
fs-extra@4.0.3 /opt/iobroker/node_modules/fs-extra
graceful-fs@4.1.15 /opt/iobroker/node_modules/graceful-fs
jsonfile@4.0.0 /opt/iobroker/node_modules/jsonfile
universalify@0.1.2 /opt/iobroker/node_modules/universalify
md5@2.2.1 /opt/iobroker/node_modules/md5
charenc@0.0.2 /opt/iobroker/node_modules/charenc
crypt@0.0.2 /opt/iobroker/node_modules/crypt
is-buffer@1.1.6 /opt/iobroker/node_modules/is-buffer
streamifier@0.1.1 /opt/iobroker/node_modules/streamifier
express-session@1.16.1 /opt/iobroker/node_modules/express-session
depd@2.0.0 /opt/iobroker/node_modules/express-session/node_modules/depd
on-headers@1.0.2 /opt/iobroker/node_modules/on-headers
uid-safe@2.1.5 /opt/iobroker/node_modules/uid-safe
random-bytes@1.0.0 /opt/iobroker/node_modules/random-bytes
passport@0.4.0 /opt/iobroker/node_modules/passport
passport-strategy@1.0.0 /opt/iobroker/node_modules/passport-strategy
pause@0.0.1 /opt/iobroker/node_modules/pause
passport-local@1.0.0 /opt/iobroker/node_modules/passport-local
passport.socketio@3.7.0 /opt/iobroker/node_modules/passport.socketio
xtend@4.0.1 /opt/iobroker/node_modules/xtend
request@2.88.0 /opt/iobroker/node_modules/request
aws-sign2@0.7.0 /opt/iobroker/node_modules/aws-sign2
aws4@1.8.0 /opt/iobroker/node_modules/aws4
caseless@0.12.0 /opt/iobroker/node_modules/caseless
combined-stream@1.0.8 /opt/iobroker/node_modules/combined-stream
delayed-stream@1.0.0 /opt/iobroker/node_modules/delayed-stream
extend@3.0.2 /opt/iobroker/node_modules/extend
forever-agent@0.6.1 /opt/iobroker/node_modules/forever-agent
form-data@2.3.3 /opt/iobroker/node_modules/form-data
asynckit@0.4.0 /opt/iobroker/node_modules/asynckit
har-validator@5.1.3 /opt/iobroker/node_modules/har-validator
ajv@6.10.0 /opt/iobroker/node_modules/ajv
fast-deep-equal@2.0.1 /opt/iobroker/node_modules/fast-deep-equal
fast-json-stable-stringify@2.0.0 /opt/iobroker/node_modules/fast-json-stable-stringify
json-schema-traverse@0.4.1 /opt/iobroker/node_modules/json-schema-traverse
uri-js@4.2.2 /opt/iobroker/node_modules/uri-js
punycode@2.1.1 /opt/iobroker/node_modules/punycode
har-schema@2.0.0 /opt/iobroker/node_modules/har-schema
http-signature@1.2.0 /opt/iobroker/node_modules/http-signature
assert-plus@1.0.0 /opt/iobroker/node_modules/assert-plus
jsprim@1.4.1 /opt/iobroker/node_modules/jsprim
extsprintf@1.3.0 /opt/iobroker/node_modules/extsprintf
json-schema@0.2.3 /opt/iobroker/node_modules/json-schema
verror@1.10.0 /opt/iobroker/node_modules/verror
sshpk@1.16.1 /opt/iobroker/node_modules/sshpk
asn1@0.2.4 /opt/iobroker/node_modules/asn1
bcrypt-pbkdf@1.0.2 /opt/iobroker/node_modules/bcrypt-pbkdf
tweetnacl@0.14.5 /opt/iobroker/node_modules/tweetnacl
dashdash@1.14.1 /opt/iobroker/node_modules/dashdash
ecc-jsbn@0.1.2 /opt/iobroker/node_modules/ecc-jsbn
jsbn@0.1.1 /opt/iobroker/node_modules/jsbn
getpass@0.1.7 /opt/iobroker/node_modules/getpass
is-typedarray@1.0.0 /opt/iobroker/node_modules/is-typedarray
isstream@0.1.2 /opt/iobroker/node_modules/isstream
json-stringify-safe@5.0.1 /opt/iobroker/node_modules/json-stringify-safe
oauth-sign@0.9.0 /opt/iobroker/node_modules/oauth-sign
performance-now@2.1.0 /opt/iobroker/node_modules/performance-now
qs@6.5.2 /opt/iobroker/node_modules/request/node_modules/qs
tough-cookie@2.4.3 /opt/iobroker/node_modules/tough-cookie
psl@1.1.32 /opt/iobroker/node_modules/psl
punycode@1.4.1 /opt/iobroker/node_modules/tough-cookie/node_modules/punycode
tunnel-agent@0.6.0 /opt/iobroker/node_modules/tunnel-agent
uuid@3.3.2 /opt/iobroker/node_modules/uuid
socket.io@1.7.2 /opt/iobroker/node_modules/socket.io
debug@2.3.3 /opt/iobroker/node_modules/socket.io/node_modules/debug
ms@0.7.2 /opt/iobroker/node_modules/socket.io/node_modules/ms
engine.io@1.8.2 /opt/iobroker/node_modules/engine.io
accepts@1.3.3 /opt/iobroker/node_modules/engine.io/node_modules/accepts
negotiator@0.6.1 /opt/iobroker/node_modules/engine.io/node_modules/negotiator
base64id@1.0.0 /opt/iobroker/node_modules/base64id
debug@2.3.3 /opt/iobroker/node_modules/engine.io/node_modules/debug
ms@0.7.2 /opt/iobroker/node_modules/engine.io/node_modules/ms
engine.io-parser@1.3.2 /opt/iobroker/node_modules/engine.io-parser
after@0.8.2 /opt/iobroker/node_modules/after
arraybuffer.slice@0.0.6 /opt/iobroker/node_modules/arraybuffer.slice
base64-arraybuffer@0.1.5 /opt/iobroker/node_modules/base64-arraybuffer
blob@0.0.4 /opt/iobroker/node_modules/blob
has-binary@0.1.7 /opt/iobroker/node_modules/has-binary
wtf-8@1.0.0 /opt/iobroker/node_modules/wtf-8
ws@1.1.1 /opt/iobroker/node_modules/ws
options@0.0.6 /opt/iobroker/node_modules/options
ultron@1.0.2 /opt/iobroker/node_modules/ultron
object-assign@4.1.0 /opt/iobroker/node_modules/object-assign
socket.io-adapter@0.5.0 /opt/iobroker/node_modules/socket.io-adapter
debug@2.3.3 /opt/iobroker/node_modules/socket.io-adapter/node_modules/debug
ms@0.7.2 /opt/iobroker/node_modules/socket.io-adapter/node_modules/ms
socket.io-parser@2.3.1 /opt/iobroker/node_modules/socket.io-parser
component-emitter@1.1.2 /opt/iobroker/node_modules/component-emitter
debug@2.2.0 /opt/iobroker/node_modules/socket.io-parser/node_modules/debug
ms@0.7.1 /opt/iobroker/node_modules/socket.io-parser/node_modules/ms
json3@3.3.2 /opt/iobroker/node_modules/json3
socket.io-client@1.7.2 /opt/iobroker/node_modules/socket.io-client
backo2@1.0.2 /opt/iobroker/node_modules/backo2
component-bind@1.0.0 /opt/iobroker/node_modules/component-bind
component-emitter@1.2.1 /opt/iobroker/node_modules/socket.io-client/node_modules/component-emitter
debug@2.3.3 /opt/iobroker/node_modules/socket.io-client/node_modules/debug
ms@0.7.2 /opt/iobroker/node_modules/socket.io-client/node_modules/ms
engine.io-client@1.8.2 /opt/iobroker/node_modules/engine.io-client
component-emitter@1.2.1 /opt/iobroker/node_modules/engine.io-client/node_modules/component-emitter
component-inherit@0.0.3 /opt/iobroker/node_modules/component-inherit
debug@2.3.3 /opt/iobroker/node_modules/engine.io-client/node_modules/debug
ms@0.7.2 /opt/iobroker/node_modules/engine.io-client/node_modules/ms
has-cors@1.1.0 /opt/iobroker/node_modules/has-cors
indexof@0.0.1 /opt/iobroker/node_modules/indexof
parsejson@0.0.3 /opt/iobroker/node_modules/parsejson
better-assert@1.0.2 /opt/iobroker/node_modules/better-assert
callsite@1.0.0 /opt/iobroker/node_modules/callsite
parseqs@0.0.5 /opt/iobroker/node_modules/parseqs
parseuri@0.0.5 /opt/iobroker/node_modules/parseuri
xmlhttprequest-ssl@1.5.3 /opt/iobroker/node_modules/xmlhttprequest-ssl
yeast@0.1.2 /opt/iobroker/node_modules/yeast
object-component@0.0.3 /opt/iobroker/node_modules/object-component
to-array@0.1.4 /opt/iobroker/node_modules/to-array
jsonwebtoken@8.5.1 /opt/iobroker/node_modules/jsonwebtoken
jws@3.2.2 /opt/iobroker/node_modules/jws
jwa@1.4.1 /opt/iobroker/node_modules/jwa
buffer-equal-constant-time@1.0.1 /opt/iobroker/node_modules/buffer-equal-constant-time
ecdsa-sig-formatter@1.0.11 /opt/iobroker/node_modules/ecdsa-sig-formatter
lodash.includes@4.3.0 /opt/iobroker/node_modules/lodash.includes
lodash.isboolean@3.0.3 /opt/iobroker/node_modules/lodash.isboolean
lodash.isinteger@4.0.4 /opt/iobroker/node_modules/lodash.isinteger
lodash.isnumber@3.0.3 /opt/iobroker/node_modules/lodash.isnumber
lodash.isplainobject@4.0.6 /opt/iobroker/node_modules/lodash.isplainobject
lodash.isstring@4.0.1 /opt/iobroker/node_modules/lodash.isstring
lodash.once@4.1.1 /opt/iobroker/node_modules/lodash.once
ms@2.1.2 /opt/iobroker/node_modules/jsonwebtoken/node_modules/ms
semver@5.7.0 /opt/iobroker/node_modules/semver
jszip@3.2.1 /opt/iobroker/node_modules/jszip
lie@3.3.0 /opt/iobroker/node_modules/lie
immediate@3.0.6 /opt/iobroker/node_modules/immediate
pako@1.0.10 /opt/iobroker/node_modules/pako
readable-stream@2.3.6 /opt/iobroker/node_modules/jszip/node_modules/readable-stream
isarray@1.0.0 /opt/iobroker/node_modules/jszip/node_modules/isarray
process-nextick-args@2.0.0 /opt/iobroker/node_modules/process-nextick-args
string_decoder@1.1.1 /opt/iobroker/node_modules/jszip/node_modules/string_decoder
util-deprecate@1.0.2 /opt/iobroker/node_modules/util-deprecate
set-immediate-shim@1.0.1 /opt/iobroker/node_modules/set-immediate-shim
loadavg-windows@1.1.1 /opt/iobroker/node_modules/loadavg-windows
weak-daemon@1.0.3 /opt/iobroker/node_modules/weak-daemon
mkdirp@0.5.1 /opt/iobroker/node_modules/mkdirp
minimist@0.0.8 /opt/iobroker/node_modules/minimist
ncp@2.0.0 /opt/iobroker/node_modules/ncp
node-schedule@1.3.2 /opt/iobroker/node_modules/node-schedule
cron-parser@2.11.0 /opt/iobroker/node_modules/cron-parser
is-nan@1.2.1 /opt/iobroker/node_modules/is-nan
define-properties@1.1.3 /opt/iobroker/node_modules/define-properties
object-keys@1.1.1 /opt/iobroker/node_modules/object-keys
moment-timezone@0.5.25 /opt/iobroker/node_modules/moment-timezone
moment@2.24.0 /opt/iobroker/node_modules/moment
long-timeout@0.1.1 /opt/iobroker/node_modules/long-timeout
sorted-array-functions@1.2.0 /opt/iobroker/node_modules/sorted-array-functions
node.extend@2.0.2 /opt/iobroker/node_modules/node.extend
has@1.0.3 /opt/iobroker/node_modules/has
function-bind@1.1.1 /opt/iobroker/node_modules/function-bind
is@3.3.0 /opt/iobroker/node_modules/is
pidusage@2.0.17 /opt/iobroker/node_modules/pidusage
prompt@1.0.0 /opt/iobroker/node_modules/prompt
colors@1.3.3 /opt/iobroker/node_modules/colors
pkginfo@0.4.1 /opt/iobroker/node_modules/pkginfo
read@1.0.7 /opt/iobroker/node_modules/read
mute-stream@0.0.8 /opt/iobroker/node_modules/mute-stream
revalidator@0.1.8 /opt/iobroker/node_modules/revalidator
utile@0.3.0 /opt/iobroker/node_modules/utile
async@0.9.2 /opt/iobroker/node_modules/async
deep-equal@0.2.2 /opt/iobroker/node_modules/deep-equal
i@0.3.6 /opt/iobroker/node_modules/i
ncp@1.0.1 /opt/iobroker/node_modules/utile/node_modules/ncp
rimraf@2.6.3 /opt/iobroker/node_modules/rimraf
glob@7.1.4 /opt/iobroker/node_modules/glob
fs.realpath@1.0.0 /opt/iobroker/node_modules/fs.realpath
inflight@1.0.6 /opt/iobroker/node_modules/inflight
once@1.4.0 /opt/iobroker/node_modules/once
wrappy@1.0.2 /opt/iobroker/node_modules/wrappy
minimatch@3.0.4 /opt/iobroker/node_modules/minimatch
brace-expansion@1.1.11 /opt/iobroker/node_modules/brace-expansion
balanced-match@1.0.0 /opt/iobroker/node_modules/balanced-match
concat-map@0.0.1 /opt/iobroker/node_modules/concat-map
path-is-absolute@1.0.1 /opt/iobroker/node_modules/path-is-absolute
winston@2.1.1 /opt/iobroker/node_modules/prompt/node_modules/winston
async@1.0.0 /opt/iobroker/node_modules/prompt/node_modules/async
colors@1.0.3 /opt/iobroker/node_modules/prompt/node_modules/winston/node_modules/colors
cycle@1.0.3 /opt/iobroker/node_modules/cycle
eyes@0.1.8 /opt/iobroker/node_modules/eyes
pkginfo@0.3.1 /opt/iobroker/node_modules/prompt/node_modules/winston/node_modules/pkginfo
stack-trace@0.0.10 /opt/iobroker/node_modules/stack-trace
pyconf@1.1.7 /opt/iobroker/node_modules/pyconf
safe-replace@1.1.0 /opt/iobroker/node_modules/safe-replace
tar@4.4.10 /opt/iobroker/node_modules/tar
chownr@1.1.1 /opt/iobroker/node_modules/chownr
fs-minipass@1.2.6 /opt/iobroker/node_modules/fs-minipass
minipass@2.3.5 /opt/iobroker/node_modules/minipass
yallist@3.0.3 /opt/iobroker/node_modules/yallist
minizlib@1.2.1 /opt/iobroker/node_modules/minizlib
winston@2.4.4 /opt/iobroker/node_modules/winston
async@1.0.0 /opt/iobroker/node_modules/winston/node_modules/async
colors@1.0.3 /opt/iobroker/node_modules/winston/node_modules/colors
winston-daily-rotate-file@1.7.2 /opt/iobroker/node_modules/winston-daily-rotate-file
yargs@11.1.0 /opt/iobroker/node_modules/yargs
cliui@4.1.0 /opt/iobroker/node_modules/cliui
string-width@2.1.1 /opt/iobroker/node_modules/string-width
is-fullwidth-code-point@2.0.0 /opt/iobroker/node_modules/is-fullwidth-code-point
strip-ansi@4.0.0 /opt/iobroker/node_modules/strip-ansi
ansi-regex@3.0.0 /opt/iobroker/node_modules/ansi-regex
wrap-ansi@2.1.0 /opt/iobroker/node_modules/wrap-ansi
string-width@1.0.2 /opt/iobroker/node_modules/wrap-ansi/node_modules/string-width
code-point-at@1.1.0 /opt/iobroker/node_modules/code-point-at
is-fullwidth-code-point@1.0.0 /opt/iobroker/node_modules/wrap-ansi/node_modules/is-fullwidth-code-point
number-is-nan@1.0.1 /opt/iobroker/node_modules/number-is-nan
strip-ansi@3.0.1 /opt/iobroker/node_modules/wrap-ansi/node_modules/strip-ansi
ansi-regex@2.1.1 /opt/iobroker/node_modules/wrap-ansi/node_modules/ansi-regex
decamelize@1.2.0 /opt/iobroker/node_modules/decamelize
find-up@2.1.0 /opt/iobroker/node_modules/find-up
locate-path@2.0.0 /opt/iobroker/node_modules/locate-path
p-locate@2.0.0 /opt/iobroker/node_modules/p-locate
p-limit@1.3.0 /opt/iobroker/node_modules/p-limit
p-try@1.0.0 /opt/iobroker/node_modules/p-try
path-exists@3.0.0 /opt/iobroker/node_modules/path-exists
get-caller-file@1.0.3 /opt/iobroker/node_modules/get-caller-file
os-locale@2.1.0 /opt/iobroker/node_modules/os-locale
execa@0.7.0 /opt/iobroker/node_modules/execa
cross-spawn@5.1.0 /opt/iobroker/node_modules/cross-spawn
lru-cache@4.1.5 /opt/iobroker/node_modules/lru-cache
pseudomap@1.0.2 /opt/iobroker/node_modules/pseudomap
yallist@2.1.2 /opt/iobroker/node_modules/lru-cache/node_modules/yallist
shebang-command@1.2.0 /opt/iobroker/node_modules/shebang-command
shebang-regex@1.0.0 /opt/iobroker/node_modules/shebang-regex
which@1.3.1 /opt/iobroker/node_modules/which
isexe@2.0.0 /opt/iobroker/node_modules/isexe
get-stream@3.0.0 /opt/iobroker/node_modules/get-stream
is-stream@1.1.0 /opt/iobroker/node_modules/is-stream
npm-run-path@2.0.2 /opt/iobroker/node_modules/npm-run-path
path-key@2.0.1 /opt/iobroker/node_modules/path-key
p-finally@1.0.0 /opt/iobroker/node_modules/p-finally
signal-exit@3.0.2 /opt/iobroker/node_modules/signal-exit
strip-eof@1.0.0 /opt/iobroker/node_modules/strip-eof
lcid@1.0.0 /opt/iobroker/node_modules/lcid
invert-kv@1.0.0 /opt/iobroker/node_modules/invert-kv
mem@1.1.0 /opt/iobroker/node_modules/mem
mimic-fn@1.2.0 /opt/iobroker/node_modules/mimic-fn
require-directory@2.1.1 /opt/iobroker/node_modules/require-directory
require-main-filename@1.0.1 /opt/iobroker/node_modules/require-main-filename
set-blocking@2.0.0 /opt/iobroker/node_modules/set-blocking
which-module@2.0.0 /opt/iobroker/node_modules/which-module
y18n@3.2.1 /opt/iobroker/node_modules/y18n
yargs-parser@9.0.2 /opt/iobroker/node_modules/yargs-parser
camelcase@4.1.0 /opt/iobroker/node_modules/camelcase
@root/mkdirp@1.0.0 /opt/iobroker/node_modules/@root/mkdirp
acme@1.3.0 /opt/iobroker/node_modules/acme
acme-v2@1.7.7 /opt/iobroker/node_modules/acme-v2
@coolaj86/urequest@1.3.7 /opt/iobroker/node_modules/@coolaj86/urequest
rsa-compat@2.0.8 /opt/iobroker/node_modules/rsa-compat
keypairs@1.2.14 /opt/iobroker/node_modules/keypairs
eckles@1.4.1 /opt/iobroker/node_modules/eckles
rasha@1.2.5 /opt/iobroker/node_modules/rasha
bindings@1.5.0 /opt/iobroker/node_modules/bindings
file-uri-to-path@1.0.0 /opt/iobroker/node_modules/file-uri-to-path
diskusage@0.2.6 /opt/iobroker/node_modules/diskusage
nan@2.14.0 /opt/iobroker/node_modules/nan
glossy@0.1.7 /opt/iobroker/node_modules/glossy
le-challenge-fs@2.0.9 /opt/iobroker/node_modules/le-challenge-fs
le-sni-auto@2.1.9 /opt/iobroker/node_modules/le-sni-auto
le-store-certbot@2.2.3 /opt/iobroker/node_modules/le-store-certbot
redis-commands@1.5.0 /opt/iobroker/node_modules/redis-commands
redis-parser@2.6.0 /opt/iobroker/node_modules/redis-parser
winston-syslog@1.2.6 /opt/iobroker/node_modules/winston-syslog
cert-info@1.5.1 /opt/iobroker/node_modules/cert-info
double-ended-queue@2.1.0-0 /opt/iobroker/node_modules/double-ended-queue
greenlock@2.7.1 /opt/iobroker/node_modules/greenlock
ursa-optional@0.9.10 /opt/iobroker/node_modules/ursa-optional
redis@2.8.0 /opt/iobroker/node_modules/redis
node-forge@0.7.6 /opt/iobroker/node_modules/node-forge
le-acme-core@2.1.4 /opt/iobroker/node_modules/le-acme-core
rsa-compat@1.9.4 /opt/iobroker/node_modules/le-acme-core/node_modules/rsa-compat
pi@raspberrypi:/opt/iobroker $ sudo rm -r node_modules/
pi@raspberrypi:/opt/iobroker $ npm install iobroker.js-controller@1.5.11 --production
npm WARN deprecated json3@3.3.2: Please use the native JSON object instead of JSON 3

iobroker.js-controller@1.5.11 preinstall /opt/iobroker/node_modules/iobroker.js-controller
node lib/preinstallCheck.js

NPM version: 6.9.0
npm version >= 5: disabling package-lock

unix-dgram@0.2.3 install /opt/iobroker/node_modules/unix-dgram
node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/unix-dgram/build'
CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
In file included from ../node_modules/nan/nan.h:190:0,
from ../src/unix_dgram.cc:5:
../node_modules/nan/nan_maybe_43_inl.h: In function ‘Nan::Maybe<bool> Nan::ForceSet(v8::Localv8::Object, v8::Localv8::Value, v8::Localv8::Value, v8::PropertyAttribute)’:
../node_modules/nan/nan_maybe_43_inl.h:88:15: error: ‘class v8::Object’ has no member named ‘ForceSet’
return obj->ForceSet(GetCurrentContext(), key, value, attribs);
^
In file included from ../src/unix_dgram.cc:5:0:
../node_modules/nan/nan.h: In function ‘v8::Localv8::Value Nan::MakeCallback(v8::Localv8::Object, v8::Localv8::Function, int, v8::Localv8::Value)’:
../node_modules/nan/nan.h:817:60: warning: ‘v8::Localv8::Value node::MakeCallback(v8::Isolate, v8::Localv8::Object, v8::Localv8::Function, int, v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/node.h:176): Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
v8::Isolate::GetCurrent(), target, func, argc, argv);
^
../node_modules/nan/nan.h: In function ‘v8::Localv8::Value Nan::MakeCallback(v8::Localv8::Object, v8::Localv8::String, int, v8::Localv8::Value)’:
../node_modules/nan/nan.h:831:62: warning: ‘v8::Localv8::Value node::MakeCallback(v8::Isolate*, v8::Localv8::Object, v8::Localv8::String, int, v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/node.h:169): Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
v8::Isolate::GetCurrent(), target, symbol, argc, argv);
^
../node_modules/nan/nan.h: In function ‘v8::Localv8::Value Nan::MakeCallback(v8::Localv8::Object, const char, int, v8::Localv8::Value)’:
../node_modules/nan/nan.h:845:62: warning: ‘v8::Localv8::Value node::MakeCallback(v8::Isolate, v8::Localv8::Object, const char*, int, v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/node.h:162): Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
v8::Isolate::GetCurrent(), target, method, argc, argv);
^
../node_modules/nan/nan.h: In member function ‘v8::Localv8::Value Nan::Callback::Call_(v8::Isolate, v8::Localv8::Object, int, v8::Localv8::Value) const’:
../node_modules/nan/nan.h:1463:5: warning: ‘v8::Localv8::Value node::MakeCallback(v8::Isolate, v8::Localv8::Object, v8::Localv8::Function, int, v8::Localv8::Value*)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/node.h:176): Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
));
^
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Socket(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:189:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
domain = info[0]->Int32Value();
^
../src/unix_dgram.cc:190:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
type = info[1]->Int32Value();
^
../src/unix_dgram.cc:191:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
protocol = info[2]->Int32Value();
^
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Bind(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:230:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
fd = info[0]->Int32Value();
^
../src/unix_dgram.cc:231:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2891): Use Isolate version [-Wdeprecated-declarations]
String::Utf8Value path(info[1]);
^
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::SendTo(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:258:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
fd = info[0]->Int32Value();
^
../src/unix_dgram.cc:259:27: warning: ‘v8::Localv8::Object v8::Value::ToObject() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:10046): Use maybe version [-Wdeprecated-declarations]
buf = info[1]->ToObject();
^
../src/unix_dgram.cc:260:33: warning: ‘uint32_t v8::Value::Uint32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2477): Use maybe version [-Wdeprecated-declarations]
offset = info[2]->Uint32Value();
^
../src/unix_dgram.cc:261:33: warning: ‘uint32_t v8::Value::Uint32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2477): Use maybe version [-Wdeprecated-declarations]
length = info[3]->Uint32Value();
^
../src/unix_dgram.cc:262:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2891): Use Isolate version [-Wdeprecated-declarations]
String::Utf8Value path(info[4]);
^
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Send(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:302:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
fd = info[0]->Int32Value();
^
../src/unix_dgram.cc:303:27: warning: ‘v8::Localv8::Object v8::Value::ToObject() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:10046): Use maybe version [-Wdeprecated-declarations]
buf = info[1]->ToObject();
^
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Connect(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:340:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
fd = info[0]->Int32Value();
^
../src/unix_dgram.cc:341:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2891): Use Isolate version [-Wdeprecated-declarations]
String::Utf8Value path(info[1]);
^
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:361:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478): Use maybe version [-Wdeprecated-declarations]
fd = info[0]->Int32Value();
^
unix_dgram.target.mk:99: recipe for target 'Release/obj.target/unix_dgram/src/unix_dgram.o' failed
make: *** [Release/obj.target/unix_dgram/src/unix_dgram.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/unix-dgram/build'
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack at ChildProcess.emit (events.js:198:13)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.9.35-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/unix-dgram
gyp ERR! node -v v10.16.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok

ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional
node rebuild.js

diskusage@0.2.6 install /opt/iobroker/node_modules/diskusage
node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/diskusage/build'
CXX(target) Release/obj.target/diskusage/src/main.o
../src/main.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetDiskUsage(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/main.cpp:26:71: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Localv8::Value)’ is deprecated (declared at /home/pi/.node-gyp/10.16.0/include/node/v8.h:2891): Use Isolate version [-Wdeprecated-declarations]
DiskUsage result = GetDiskUsage(v8::String::Utf8Value(info[0]));
^
CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o
../src/diskusage_posix.cpp: In function ‘DiskUsage GetDiskUsage(const char)’:
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_bsize’ [-Wmissing-field-initializers]
struct statvfs info = {};
^
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_frsize’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_blocks’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_bfree’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_bavail’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_files’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_ffree’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_favail’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_fsid’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::__f_unused’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_flag’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::f_namemax’ [-Wmissing-field-initializers]
../src/diskusage_posix.cpp:10:28: warning: missing initializer for member ‘statvfs::__f_spare’ [-Wmissing-field-initializers]
SOLINK_MODULE(target) Release/obj.target/diskusage.node
COPY Release/diskusage.node
make: Leaving directory '/opt/iobroker/node_modules/diskusage/build'

iobroker.js-controller@1.5.11 install /opt/iobroker/node_modules/iobroker.js-controller
node iobroker.js setup first

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: unix-dgram@0.2.3 (node_modules/unix-dgram):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: unix-dgram@0.2.3 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

• iobroker.js-controller@1.5.11
  added 341 packages from 279 contributors and audited 855 packages in 72.615s
  found 27 vulnerabilities (19 low, 8 high)
  run npm audit fix to fix them, or npm audit for details
  pi@raspberrypi:/opt/iobroker $ npm audit fix
  npm ERR! code EAUDITNOLOCK
  npm ERR! audit Neither npm-shrinkwrap.json nor package-lock.json found: Cannot audit a project without a lockfile
  npm ERR! audit Try creating one first with: npm i --package-lock-only

npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2019-06-07T11_00_48_619Z-debug.log
pi@raspberrypi:/opt/iobroker $ sudo npm audit fix
npm ERR! code EAUDITNOLOCK
npm ERR! audit Neither npm-shrinkwrap.json nor package-lock.json found: Cannot audit a project without a lockfile
npm ERR! audit Try creating one first with: npm i --package-lock-only

npm ERR! A complete log of this run can be found in:
npm ERR! /root/.npm/_logs/2019-06-07T11_01_37_916Z-debug.log
pi@raspberrypi:/opt/iobroker $ iobroker start
pi@raspberrypi:/opt/iobroker $

[Homoran]

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

cd /opt/iobroker
iobroker backup (funktioniert nicht)

Warum nicht, was kommt da für ein Fehler?

[Ralf]

@Homoran
pi@raspberrypi:~ $ cd /opt/iobroker
pi@raspberrypi:/opt/iobroker $ iobroker backup
fs.js:114
throw err;
^

Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/iobroker.js-controller/backups'
at Object.mkdirSync (fs.js:757:3)
at states.getStates (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:225:61)
at StatesInMemory.getStates (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInMemServer.js:569:45)
at states.getKeys (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:211:24)
at StatesInMemory.getKeys (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInMemServer.js:727:45)
at objects.getObjectList (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupBackup.js:204:20)
at _getObjectList (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:2886:9)
at checkObjectRights (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:2912:28)
at checkObjectRights (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:1869:20)
at ObjectsInMemServer.getObjectList (/opt/iobroker/node_modules/iobroker.js-controller/lib/objects/objectsInMemServer.js:2908:13)

[Homoran]

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Error: EACCES: permission denied

Das sieht aus, als hättest du den Fixer nicht laufen lassen

[Ralf]

@Homoran sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Das sieht aus, als hättest du den Fixer nicht laufen lassen

Steht auch nicht in der Anleitung (woher sollte ich das wissen)
Dann habe ich jetzt zwar kein Backup, aber warum geht denn jetzt gar nichts mehr ?

[Homoran]

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Steht auch nicht in der Anleitung (woher sollte ich das wissen)

Eventuell werfe ich hier zwei Threads durcheinander, ich dachte das Thema hätten wir gerade durch gehabt.

Wenn nicht, steht das mit dem Fixer natürlich nicht in DER Anleitung, da der Fixer nur bei Probleminstallationen fällig werden muss.

[Ralf]

@Homoran kein Problem.
Hast du vielleicht Gelegenheit, mal meine Geschichte anzusehen ? iOBroker startet jetzt nicht mehr nach Ausführung der Anleitung.

[Homoran]

@Ralf

Das Problem ist, wie @AlCalzone schon schreibt, dass Elzershark Befehle verwendet, die vor Jahren mal gepasst hätten, heute aber zu unvorhersehbaren Effekten führen können.

Dir jetzt mal eben schnell zu helfen ist eventuell gar nicht mehr möglich.

Mein Vorschlag wäre:
komplett neu aufbauen und dann vorhandenes Backup einspielen.

Was hast du bisher auf der Installation gehabt, was du nicht vermissen willst?

[Ralf]

@Homoran ich hatte eigentlich nur relativ wenige Adapter und zwei Blockly Skripte installiert, von denen ich Sicherungen habe. Wichtig wäre der Alexa2 Adapter.

[Homoran]

@Ralf

Hast du noch ein Backup?

Hattest du Historydaten?

[Ralf]

@Homoran das Backup hat ja nicht funktioniert. Ich habe allerdings eine alte Komplettsicherung der SD Karte.
Ich weis gar nicht, was History Daten sind und wofür man sie braucht.

[Homoran]

@Ralf

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Ich weis gar nicht, was History Daten sind

In diesem Falle ist das gut ;-) Dann brauchen wir uns darum nicht zu kümmern.

Sicherheitshalber habe ich mir jetzt den Eröffnungsthread nochmal durchgelesen.

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Nachdem ich die iObroker Installation bei einem Update zerschossen habe, bekomme ich nach der Neu-Installation die folgenden Fehlermeldungen :
File index_m.html not found
File index.html not found
File tab.html not found

Da hast du bereits dein Backup wieder eingespielt gehabt?

[Ralf]

@Homoran Ich bin nicht sicher, ob ich da bereits das Backup wieder eingespielt hatte. Spricht etwas gegen eine Neuinstallation bei den wenigen Adaptern ? Die Sicherung auf die SD Karte zurückzuschreiben dauert ja Stunden.

[Homoran]

@Ralf

Wenn du da schon dein Backup wieder eingespielt hast gibt es (mindestens) zwei mögliche Gründe für das aufgetretene:

• Das Backup war bereits defekt.
• Der Restore war noch nicht fertig.
  ** Du hast schon einige Adapter installiert, und da alles nach einem Restor neu Installiert und ggf. kompiliert wird, aknn so ein Restore auch schon mal 2 Stunden dauern.
  Das sieht man auch daran, dass die Icons bei den Instanzen moch nicht zu shen sind.

Wie lange hattest du denn gewartet?

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Spricht etwas gegen eine Neuinstallation bei den wenigen Adaptern

Im Gegenteil.
Danach hast du definitiv ein sauberes System, was man zum gegenwärtigen Zeitpunkt nicht mit Sicherheit sagen kann.

Nur zwei Anmerkungen:

1. Bitte nimm unsere Anleitung: https://www.iobroker.net/#de/documentation/install/linux.md
   (Achtung unter Punkt 4, ist ein Fehler -der ist bereits korrigiert aber noch nicht online! - hier heißt es korrekt: sudo apt-get install -y build-essential libavahi-compat-libdnssd-dev libudev-dev libpam0g-dev nodejs )

2. Gemäß deinem Screenshot im ersten Post
   
   hast du schon einige (mindestens 18) Instanzen installiert.
   Ein RaspberryPi besitzt nur 1GB RAM. Hier kann es schon langsam eng werden.

[paul53]

@Ralf sagte:

Ich weis gar nicht, was History Daten sind und wofür man sie braucht.

Was macht dann die aktive History-Instanz ?

[Ralf]

@Homoran sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Bitte nimm unsere Anleitung: https://www.iobroker.net/#de/documentation/install/linux.md

Bin jetzt hiernach vorgegangen Ergebnis : iOBroker startet jetzt wieder, alle Adapter und Instanzen sind nach wie vor vorhanden, lassen sich aber nicht konfigurieren. Meldungen wie gehabt :

File index_m.html not found
File index.html not found
File tab.html not found

Hast du noch eine Idee ?

Ich glaube, das System Update läuft nicht richtig durch, bleibt nach kurzer Zeit hängen (s. Bild). Kann da vielleicht etwas klemmen ?
Ist i.O. (läuft richtig durch)

Ich hänge mal das heutige Log-File an, könntest du bitte mal drüberschauen ? Sind ne Menge Fehlermeldungen drin.

Spoiler

Logfile_08.06.19.txt

[Ralf]

@paul53 Adapter ist grün, aber mehr kann ich nicht sagen, komme ja nirgends dran.

[Homoran]

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

lassen sich aber nicht konfigurieren. Meldungen wie gehabt :

@Homoran sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Der Restore war noch nicht fertig.
** Du hast schon einige Adapter installiert, und da alles nach einem Restor neu Installiert und ggf. kompiliert wird, aknn so ein Restore auch schon mal 2 Stunden dauern.
Das sieht man auch daran, dass die Icons bei den Instanzen moch nicht zu sehen sind.

[Ralf]

@Homoran Hallo,
habe jetzt zum x-ten Mal Node, Node js, NPM und iObroker neu installiert. Es läuft jetzt bedingt mit folgenden Ausnahmen :
Alexa 2 Adapter startet nicht (gelb)
TR-064 Adapter starten nicht (rot)
Eine Menge Fehler im LOG :

Log File :

Spoiler

Logfile_neu_08.06.19.txt

Könntest du bitte noch mal helfen ?
Danke Dir im Voraus.

[Homoran]

@Ralf sagte in File index_m.html not found / File index.html not found / File tab.html not found nach Neuinstallation iOBroker:

Könntest du bitte noch mal helfen ?

Da ich beide nicht nutze, leider nur bedingt

zum tr-064 Adapter gibt es etliche threads mit Lösungen

Bei Alexa2 eventuell auch. Ich erinnere mich dass Schlüssel neu vergeben werden/oder Geräte neu eingelesen, was auch immer ich habe keine Ahnung von dem Kram