Raspberry "friert ein" nach Aufruf von ioBroker
-
Die ganze Misere begann ja mit der Installation von Influx und Grafana. Kann man das irgendwie wieder rückgängig machen ?
@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
Kann man das irgendwie wieder rückgängig machen ?
sudo apt remove grafana influx* -
@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
Kann man das irgendwie wieder rückgängig machen ?
sudo apt remove grafana influx* -
@thomas-braun Auf den Befehl bekomme ich:
dpkg was interrupted, you must manually run `sudo dpkg --configure -a´ to correct the problem.Dann tu das. Da hast du wohl mal den Strom gekillt während die Paket-Datenbank offen war...
-
Dann tu das. Da hast du wohl mal den Strom gekillt während die Paket-Datenbank offen war...
@thomas-braun Der Befehl diag" ergibt die Anzeige, dass nodejs nicht korrekt installiert ist und verweist auf https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian
Das probiere ich gerade, aber der Befehl sudo rm ´sudo find / -name nodesource.key´ wird mit "rm: missing operand" quittiert...
was tun? -
@thomas-braun Der Befehl diag" ergibt die Anzeige, dass nodejs nicht korrekt installiert ist und verweist auf https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian
Das probiere ich gerade, aber der Befehl sudo rm ´sudo find / -name nodesource.key´ wird mit "rm: missing operand" quittiert...
was tun?@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
Der Befehl diag" ergibt die Anzeige
Nicht erzählen: Zeigen!
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge
-
@thomas-braun Der Befehl diag" ergibt die Anzeige, dass nodejs nicht korrekt installiert ist und verweist auf https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian
Das probiere ich gerade, aber der Befehl sudo rm ´sudo find / -name nodesource.key´ wird mit "rm: missing operand" quittiert...
was tun?@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
@thomas-braun Der Befehl diag" ergibt die Anzeige, dass nodejs nicht korrekt installiert ist und verweist auf https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian
Das probiere ich gerade, aber der Befehl sudo rm ´sudo find / -name nodesource.key´ wird mit "rm: missing operand" quittiert...
was tun?Mach mal ein
sudo dpkg --configure -aso, wie es geschrieben stand.
-
@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
@thomas-braun Der Befehl diag" ergibt die Anzeige, dass nodejs nicht korrekt installiert ist und verweist auf https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian
Das probiere ich gerade, aber der Befehl sudo rm ´sudo find / -name nodesource.key´ wird mit "rm: missing operand" quittiert...
was tun?Mach mal ein
sudo dpkg --configure -aso, wie es geschrieben stand.
@meister-mopper Es passiert nichts und die Eingabe-Aufforderung wird wieder angezeigt...
-
@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
@thomas-braun Der Befehl diag" ergibt die Anzeige, dass nodejs nicht korrekt installiert ist und verweist auf https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian
Das probiere ich gerade, aber der Befehl sudo rm ´sudo find / -name nodesource.key´ wird mit "rm: missing operand" quittiert...
was tun?Mach mal ein
sudo dpkg --configure -aso, wie es geschrieben stand.
@meister-mopper said in Raspberry "friert ein" nach Aufruf von ioBroker:
sudo dpkg --configure -a
simon@iobroker:~ $ sudo dpkg --configure -a
simon@iobroker:~ $ -
@meister-mopper Es passiert nichts und die Eingabe-Aufforderung wird wieder angezeigt...
@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
@meister-mopper Es passiert nichts und die Eingabe-Aufforderung wird wieder angezeigt...
Dann klöppel mal endlich ein
iob diaghier rein (</>). Sonst geht es ja nicht weiter. -
@meister-mopper said in Raspberry "friert ein" nach Aufruf von ioBroker:
sudo dpkg --configure -a
simon@iobroker:~ $ sudo dpkg --configure -a
simon@iobroker:~ $@greenhorn kannst du mal die komplette Ausgabe von dem
iob fixUnd anschließend dem
NodeJS Update Befehl hier zeigen.
-
@greenhorn sagte in Raspberry "friert ein" nach Aufruf von ioBroker:
@meister-mopper Es passiert nichts und die Eingabe-Aufforderung wird wieder angezeigt...
Dann klöppel mal endlich ein
iob diaghier rein (</>). Sonst geht es ja nicht weiter.@meister-mopper said in Raspberry "friert ein" nach Aufruf von ioBroker:
iob diag
Hoffe, das ist richtig:
Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/London (GMT, +0000) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 3 Pending iob updates: 14 Nodejs-Installation: /usr/bin/nodejs v12.22.12 /usr/bin/node v12.22.12 /home/iobroker/.diag.sh: line 488: npm: command not found /home/iobroker/.diag.sh: line 489: npx: command not found /home/iobroker/.diag.sh: line 490: corepack: command not found Recommended versions are nodejs Server Cannot start inMem-states on port 9000: Failed to lock DB file "/opt/iobroker/iobroker-data/states.jsonl"! and npm *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 3.8G 2.0G 947M 1.0M 885M 2.0G Swap: 99M 0B 99M Total: 3.9G 2.0G 1.0G Active iob-Instances: 9 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: system.adapter.admin.0 : admin : iobroker - disabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3908 States: 3264 Size of iob-Database: 244M /opt/iobroker/iobroker-data/objects.jsonl 2.5M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
simon@iobroker:~ $ -
@greenhorn kannst du mal die komplette Ausgabe von dem
iob fixUnd anschließend dem
NodeJS Update Befehl hier zeigen.
@wendy2702 said in Raspberry "friert ein" nach Aufruf von ioBroker:
iob
simon@iobroker:~ $ iob fix
library: loaded
Library version=2024-01-04
ioBroker or some processes are still running:
io.sonoff.0
io.hmip.0
io.mqtt.0
io.discovery.0
io.web.0
io.link.0
io.midea.0
io.iqontrol.0
Please stop them first and try again!
simon@iobroker:~ $Hoffe, das ist richtig:
simon@iobroker:~ $ NODE_MAJOR=18
simon@iobroker:~ $ sudo apt update
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://apt.grafana.com stable InRelease
Get:6 https://repos.influxdata.com/debian bullseye InRelease [7,049 B]
Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease
Err:6 https://repos.influxdata.com/debian bullseye InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Reading package lists... Done
W: GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: The repository 'https://repos.influxdata.com/debian bullseye InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
simon@iobroker:~ $ -
@meister-mopper said in Raspberry "friert ein" nach Aufruf von ioBroker:
iob diag
Hoffe, das ist richtig:
Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/London (GMT, +0000) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 3 Pending iob updates: 14 Nodejs-Installation: /usr/bin/nodejs v12.22.12 /usr/bin/node v12.22.12 /home/iobroker/.diag.sh: line 488: npm: command not found /home/iobroker/.diag.sh: line 489: npx: command not found /home/iobroker/.diag.sh: line 490: corepack: command not found Recommended versions are nodejs Server Cannot start inMem-states on port 9000: Failed to lock DB file "/opt/iobroker/iobroker-data/states.jsonl"! and npm *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 3.8G 2.0G 947M 1.0M 885M 2.0G Swap: 99M 0B 99M Total: 3.9G 2.0G 1.0G Active iob-Instances: 9 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: system.adapter.admin.0 : admin : iobroker - disabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3908 States: 3264 Size of iob-Database: 244M /opt/iobroker/iobroker-data/objects.jsonl 2.5M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
simon@iobroker:~ $@greenhorn ist zwar nur die Kurzfassung aber:
Altes OS mit uralter NodeJs Version.
Hast du Backups?
Dein Admin läuft nicht wenn ich das richtig sehe:
iob start admin.0 -
@greenhorn ist zwar nur die Kurzfassung aber:
Altes OS mit uralter NodeJs Version.
Hast du Backups?
Dein Admin läuft nicht wenn ich das richtig sehe:
iob start admin.0 -
@wendy2702 Nein, leider kein richtiges Backup...
Du hast ein log vom fix Befehl gepostet.
Da steht am Ende drin das Iob noch läuft und zuerst gestoppt werden soll.
Hast du das gelesen und gemacht?
Das mit dem NodeJS was du gepostet hast, ist das was vollständiges?
-
Du hast ein log vom fix Befehl gepostet.
Da steht am Ende drin das Iob noch läuft und zuerst gestoppt werden soll.
Hast du das gelesen und gemacht?
Das mit dem NodeJS was du gepostet hast, ist das was vollständiges?
@wendy2702 Sorry, ich komme da leider nicht ganz mit. Wie kann ich das mit dem NodeJS vollständig erhalten?
-
Du hast ein log vom fix Befehl gepostet.
Da steht am Ende drin das Iob noch läuft und zuerst gestoppt werden soll.
Hast du das gelesen und gemacht?
Das mit dem NodeJS was du gepostet hast, ist das was vollständiges?
simon@iobroker:~ $ iob stop
simon@iobroker:~ $ iob fix
library: loaded
Library version=2024-01-04==========================================================================
Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times.==========================================================================
==========================================================================
Installing prerequisites (1/5)Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Get:5 https://repos.influxdata.com/debian bullseye InRelease [7,049 B]
Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:7 https://apt.grafana.com stable InRelease
Err:5 https://repos.influxdata.com/debian bullseye InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Reading package lists... Done
W: GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: The repository 'https://repos.influxdata.com/debian bullseye InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.==========================================================================
Checking ioBroker user and directory permissions (2/5)Created /etc/sudoers.d/iobroker
Fixing directory permissions...==========================================================================
Check and cleanup npm temporary directories (3/5)Done.
==========================================================================
Database maintenance (4/5)Checking for uncompressed JSONL databases... This might take a while!
usage: sudo -h | -K | -k | -V
usage: sudo -v [-AknS] [-g group] [-h host] [-p prompt] [-u user]
usage: sudo -l [-AknS] [-g group] [-h host] [-p prompt] [-U user] [-u user] [command]
usage: sudo [-AbEHknPS] [-r role] [-t type] [-C num] [-D directory] [-g group] [-h host] [-p prompt] [-R directory] [-T timeout] [-u user] [VAR=value] [-i|-s] [<command>]
usage: sudo -e [-AknS] [-r role] [-t type] [-C num] [-D directory] [-g group] [-h host] [-p prompt] [-R directory] [-T timeout] [-u user] file ...
main: line 14: [: -lt: unary operator expected
sudo: npm: command not found==========================================================================
Checking autostart (5/5)Enabling autostart...
Autostart enabled!==========================================================================
Your installation was fixed successfully Run iobroker start to start ioBroker again!==========================================================================
simon@iobroker:~ $ iobroker start
simon@iobroker:~ $ -
@wendy2702 said in Raspberry "friert ein" nach Aufruf von ioBroker:
iob diag
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 19:47:29 up 32 min, 1 user, load average: 0.31, 0.55, 0.47 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-02-25 19:47:30 GMT Universal time: Sun 2024-02-25 19:47:30 UTC RTC time: n/a Time zone: Europe/London (GMT, +0000) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** simon /home/simon simon adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.8G 955M 1.0M 1.0G 2.2G Swap: 99M 0B 99M Total: 3.9G 1.8G 1.1G 3794 M total memory 1830 M used memory 1700 M active memory 921 M inactive memory 955 M free memory 75 M buffer memory 932 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 4.7G 24G 17% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 223M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 25 19:14:33 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=D8:3A:DD:0F:E4:E2 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=fe379c38-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 25 19:14:34 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Feb 25 19:14:34 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun Feb 25 19:14:37 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.4G /var/ 859M /var/log 841M /var/log/journal/2afb5f7f70fe4270a1433886fb089ee5 841M /var/log/journal 302M /var/cache Archived and active journals take up 840.1M in the file system. /opt/iobroker/backups: 55M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 463M /opt/iobroker/iobroker-data/ 135M /opt/iobroker/iobroker-data/files 52M /opt/iobroker/iobroker-data/files/javascript.admin 40M /opt/iobroker/iobroker-data/backup-objects 34M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 285M /opt/iobroker/iobroker-data/objects.jsonl 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.8M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/550.cfbef968.chunk.js.map 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v12.22.12 /usr/bin/node v12.22.12 /home/iobroker/.diag.sh: line 279: npm: command not found /home/iobroker/.diag.sh: line 280: npx: command not found /home/iobroker/.diag.sh: line 281: corepack: command not found /home/iobroker/.diag.sh: line 290: npm: command not found /home/iobroker/.diag.sh: line 291: npx: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 12.22.12~dfsg-1~deb11u4 Candidate: 18.19.1-1nodesource1 Version table: 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages *** 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 100 /var/lib/dpkg/status Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: /home/iobroker/.diag.sh: line 360: npm: command not found *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.8.0 javascript: 7.1.4 /home/iobroker/.diag.sh: line 375: npm: command not found Adapters from github: 0 Adapter State system.adapter.admin.0 : admin : iobroker - disabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : iobroker - disabled + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.hmip.0 : hmip : iobroker - enabled system.adapter.influxdb.0 : influxdb : iobroker - disabled, port: 8086 + system.adapter.iqontrol.0 : iqontrol : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled system.adapter.javascript.0 : javascript : iobroker - disabled + system.adapter.link.0 : link : iobroker - enabled + system.adapter.midea.0 : midea : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 system.adapter.shelly.0 : shelly : iobroker - disabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 0.0.0.0 system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis.0 : vis : iobroker - disabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : iobroker - disabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.8.0 [Updatable] Adapter "backitup" : 2.10.11 , installed 2.6.23 [Updatable] Adapter "discovery" : 4.2.0 , installed 3.1.0 [Updatable] Adapter "hmip" : 1.21.0 , installed 1.20.0 [Updatable] Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.2 [Updatable] Adapter "javascript" : 7.8.0 , installed 7.1.4 [Updatable] Controller "js-controller": 5.0.19 , installed 4.0.24 [Updatable] Adapter "link" : 0.5.12 , installed 0.5.12 Adapter "midea" : 0.0.7 , installed 0.0.7 Adapter "mqtt" : 5.2.0 , installed 4.1.1 [Updatable] Adapter "shelly" : 6.6.1 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 4.2.0 [Updatable] Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "tuya" : 3.15.0 , installed 3.15.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "web" : 6.2.3 , installed 4.3.0 [Updatable] Adapter "ws" : 2.5.10 , installed 1.3.0 [Updatable] Adapter "zigbee" : 1.10.1 , installed 1.9.7 [Updatable] Adapter "zigbee2mqtt" : 2.13.4 , installed 2.13.4 Objects and States Please stand by - This may take a while Objects: 3908 States: 3264 *** OS-Repositories and Updates *** W: GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E E: The repository 'https://repos.influxdata.com/debian bullseye InRelease' is not signed. Pending Updates: 3 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 110 14428 512/influxd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 28796 4257/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13142 553/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 27223 4238/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 28486 4238/iobroker.js-co tcp6 0 0 :::8086 :::* LISTEN 110 14037 512/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 27330 4313/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 13153 553/sshd: /usr/sbin tcp6 0 0 :::3000 :::* LISTEN 111 14178 692/grafana udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12258 400/avahi-daemon: r udp 0 0 0.0.0.0:42522 0.0.0.0:* 108 12260 400/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14048 691/dhcpcd udp6 0 0 :::5353 :::* 108 12259 400/avahi-daemon: r udp6 0 0 :::57185 :::* 108 12261 400/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-02-25 19:41:36.839 - info: iqontrol.0 (4359) Creating Popup States... 2024-02-25 19:41:37.570 - info: iqontrol.0 (4359) Creating Widget States... 2024-02-25 19:41:37.571 - info: iqontrol.0 (4359) Lists deactivated. 2024-02-25 19:41:37.572 - info: iqontrol.0 (4359) Deleting unused Objects... 2024-02-25 19:41:37.574 - info: iqontrol.0 (4359) Subscribing to states... 2024-02-25 19:41:37.575 - info: iqontrol.0 (4359) iQontrol ready. 2024-02-25 19:41:43.883 - info: hmip.0 (4272) ws connection opened 2024-02-25 19:41:44.152 - info: hmip.0 (4272) unknown channel type - DEVICE_BLOCKING - {"id":"3014F711A0002E9F29992FF7","type":"WALL_MOUNTED_KEY_PAD","homeId":"ef659a5d-aae8-47d2-a3b5-9223631a7821","lastStatusUpdate":1708888089958,"label":"Keypad Alarm + Haustürschloss","functionalChannels":{"0":{"label":"","deviceId":"3014F711A0002E9F29992FF7","index":0,"groupIndex":0,"functionalChannelType":"DEVICE_BLOCKING","groups":["31ff38e1-dd53-4727-b20e-1ea692736b01"],"unreach":false,"lowBat":false,"routerModuleEnabled":false,"multicastRoutingEnabled":false,"routerModuleSupported":false,"rssiDeviceValue":-73,"rssiPeerValue":null,"configPending":false,"dutyCycle":false,"deviceOverloaded":false,"coProUpdateFailure":false,"coProFaulty":false,"coProRestartNeeded":false,"deviceUndervoltage":false,"deviceOverheated":false,"temperatureOutOfRange":false,"devicePowerFailureDetected":false,"supportedOptionalFeatures":{"IFeatureGarageGroupSensorChannel":false,"IFeatureLightGroupSensorChannel":false,"IFeatureAccessAuthorizationSensorChannel":false,"IFeatureShadingGroupSensorChannel":false},"authorized":true,"actionParameter":"NOT_CUSTOMISABLE","actionCodeConfigured":false},"14":{"label":"","deviceId":"3014F711A0002E9F29992FF7","index":14,"groupIndex":7,"functionalChannelType":"CODE_PROTECTED_SECONDARY_ACTION_CHANNEL","groups":[],"supportedOptionalFeatures":{"IFeatureGarageGroupSensorChannel":false,"IFeatureLightGroupSensorChannel":false,"IFeatureAccessAuthorizationSensorChannel":false,"IFeatureShadingGroupSensorChannel":false}},"15":{"label":"","deviceId":"3014F711A0002E9F29992FF7","index":15,"groupIndex":8,"functionalChannelType":"CODE_PROTECTED_PRIMARY_ACTION_CHANNEL","groups":[],"channelRole":null,"supportedOptionalFeatures":{"IFeatureGarageGroupSensorChannel":false,"IFeatureLightGroupSensorChannel":false,"IFeatureAccessAuthorizationSensorChannel":false,"IFeatureShadingGroupSensorChannel":false},"authorized":true,"actionParameter":"NOT_CUSTOMISABLE","actionCodeConfigured":false},"16":{"label":"","deviceId":"3014F711A0002E9F29992FF7","index":16,"groupIndex":8,"functionalChannelType":"CODE_PROTECTED_SECONDARY_ACTION_CHANNEL","groups":[],"supportedOptionalFeatures":{"IFeatureGarageGroupSensorChannel":false,"IFeatureLightGroupSensorChannel":false,"IFeatureAccessAuthorizationSensorChannel":false,"IFeatureShadingGroupSensorChannel":false}}},"deviceArchetype":"HMIP","manuallyUpdateForced":true,"measuredAttributes":{},"updateState":"UP_TO_DATE","firmwareVersion":"1.0.12","modelType":"HmIP-WKP","permanentlyReachable":false,"connectionType":"HMIP_RF","firmwareVersionInteger":65548,"liveUpdateState":"LIVE_UPDATE_NOT_SUPPORTED","modelId":441,"availableFirmwareVersion":"1.0.12","serializedGlobalTradeItemNumber":"3014F711A0002E9F29992FF7","manufacturerCode":1,"oem":"eQ-3"} 2024-02-25 19:41:54.684 - info: hmip.0 (4272) hmip adapter connected and readyCopy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/London (GMT, +0000) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 3 Pending iob updates: 14 Nodejs-Installation: /usr/bin/nodejs v12.22.12 /usr/bin/node v12.22.12 /home/iobroker/.diag.sh: line 488: npm: command not found /home/iobroker/.diag.sh: line 489: npx: command not found /home/iobroker/.diag.sh: line 490: corepack: command not found Recommended versions are nodejs and npm *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 3.8G 1.9G 909M 1.0M 998M 2.1G Swap: 99M 0B 99M Total: 3.9G 1.9G 1.0G Active iob-Instances: 9 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: system.adapter.admin.0 : admin : iobroker - disabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3908 States: 3264 Size of iob-Database: 285M /opt/iobroker/iobroker-data/objects.jsonl 4.2M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden554
Online32.8k
Benutzer82.8k
Themen1.3m
Beiträge