Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[Frank-KNX]

So, ich habe die 4 zeilen von Homoran eingegeben.

Ich erhalte die grüne Meldung "your installation was fixed successfully".
nach der Eingabe " iob diag" erhalte ich nun eine mehrseitige Darstellung (die ich derzeit ohne SSH nicht abfotografieren will...

Daher die Frage, welche Information ist wichtig für euch, um eine Fernanalyse machen zu können.

Es ist unverändert das "alte" System 3.x aktiv.

[Homoran]

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

Daher die Frage, welche Information ist wichtig für euch, um eine Fernanalyse machen zu können.

ALLES!

wenn diese Ausgabe

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

eine mehrseitige Darstellung (

enthält, ist wohl sehr viel krumm

Dann mach erst dein SSH flott

[Homoran]

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

Es ist unverändert das "alte" System 3.x aktiv.

Natürlich!
der fixer fixt in erster Linie nur verbogene Rechte so gut er kann

[Frank-KNX]

@homoran

Es werden aber nicht wirklich Fehler sondern alle Adapter und Versionsnummern angezeigt und das die "alte" Version fehlerfrei läuft.

"SSH" ist für einen Anfänger wie mich vermutlich eine noch größere Hürde, oder lässt sich das mit Anleitung einfach herstellen ?

Ich vermute, dass ich nun mit eurer Hilfe zumindest die alte Version "gefixt" habe und vielleicht sollte ich mit den richtigen befehlen von Euch erneut den gesamten Updatevorgang erneut starten...

[Homoran]

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

lässt sich das mit Anleitung einfach herstellen ?

ähm, ja!

windows?
powershell öffnen
ssh user@IP eingeben
fertig

user und ip natürlich entsprechend deiner Installation

[Thomas Braun]

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

"SSH" ist für einen Anfänger wie mich vermutlich eine noch größere Hürde, oder lässt sich das mit Anleitung einfach herstellen ?

https://www.heise.de/tipps-tricks/Raspberry-Pi-SSH-einrichten-so-geht-s-4190645.html

[Frank-KNX]

@homoran
Aber meines Wissens, muss ich doch im PI auch SSH freigeben, oder ?
Ich habe unter Einstellungen im PI mal dazu etwas gefunden.. aber SSH ist nicht aktiv.

[mcm1957]

@homoran said in Update js-Controller 3.x auf 5.x funktioniert nicht:

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

lässt sich das mit Anleitung einfach herstellen ?

ähm, ja!

windows?
powershell öffnen
ssh user@IP eingeben
fertig

user und ip natürlich entsprechend deiner Installation

geht auch in der Eingabeaufforderung ("cmd"), muss nicht powershell sein.

[Homoran]

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

muss ich doch im PI auch SSH freigeben, oder ?

ja!
wenn das noch nicht ist, am tatsch screen sudo raspi-config aufrufen und einstellen.

Natürlich als user pi

[Frank-KNX]

@homoran
So, SSH funktioniert.

Vielen Dank..
Nun wieder zum Update, damit ich wieder auf dem aktuellen Stand bin.

Was soll ich nun eingeben ?

[Thomas Braun]

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

Was soll ich nun eingeben ?

iob diag

Damit man mal sieht wie du da genau unterwegs bist.

[Frank-KNX]

@thomas-braun
======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.63-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 22:44:41 up  4:00,  3 users,  load average: 0.34, 0.22, 0.27
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Fri 2024-02-02 22:44:41 CET
           Universal time: Fri 2024-02-02 21:44:41 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.9G        975M        5.9G         50M        1.1G        6.7G
Swap:           99M          0B         99M
Total:         8.0G        975M        6.0G

         7898 M total memory
          975 M used memory
          534 M active memory
         1296 M inactive memory
         5866 M free memory
          134 M buffer memory
          922 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT                  LOAD   ACTIVE SUB    DESCRIPTION
* bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      117G  9.5G  103G   9% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  8.7M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M  4.0K  790M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Feb  2 18:43:58 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D3:7A:A7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=def5eda3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Fri Feb  2 18:43:59 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Feb  2 18:43:59 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Feb  2 18:44:01 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET                SOURCE         FSTYPE          OPTIONS
/                     /dev/mmcblk0p2 ext4            rw,noatime
|-/sys/fs/bpf         none           bpf             rw,nosuid,nodev,noexec,relatime,mode=700
|-/run/user/1000/gvfs gvfsd-fuse     fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
`-/boot               /dev/mmcblk0p1 vfat            rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
914M    /var/
552M    /var/cache
539M    /var/cache/apt
480M    /var/cache/apt/archives
248M    /var/lib

Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
101M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
148M    /opt/iobroker/iobroker-data/
69M     /opt/iobroker/iobroker-data/files
59M     /opt/iobroker/iobroker-data/backup-objects
16M     /opt/iobroker/iobroker-data/files/javascript.admin
13M     /opt/iobroker/iobroker-data/files/vis.0

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/objects.json.bak
6.3M    /opt/iobroker/iobroker-data/objects.json
4.7M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/2.7e0b7583.chunk.js.map
3.5M    /opt/iobroker/iobroker-data/files/vis.0/Grundriss_final.png
3.4M    /opt/iobroker/iobroker-data/files/vis.0/Parkplatz.jpg

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.0.0
/usr/bin/node           v18.0.0
/usr/bin/npm            8.6.0
/usr/bin/npx            8.6.0
/usr/bin/corepack       0.10.0


nodejs:
  Installed: 18.0.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
 *** 18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: file
States  type: file

Core adapters versions
js-controller:  3.1.6
admin:          4.1.11
javascript:     4.8.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                 : admin                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.discovery.0             : discovery             -  enabled
  system.adapter.ical.0                  : ical                  -  enabled
  system.adapter.icons-mfd-png.0         : icons-mfd-png         -  enabled
+ system.adapter.influxdb.0              : influxdb              -  enabled, port: 8086
+ system.adapter.info.0                  : info                  -  enabled
+ system.adapter.javascript.0            : javascript            -  enabled
+ system.adapter.knx.0                   : knx                   -  enabled, bind: 192.168.2.98
+ system.adapter.linux-control.0         : linux-control         -  enabled
+ system.adapter.meldungsliste.0         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.1         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.10        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.11        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.12        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.13        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.2         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.3         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.4         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.5         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.6         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.7         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.8         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.9         : meldungsliste         -  enabled
+ system.adapter.node-red.0              : node-red              -  enabled, port: 1880, bind: 192.168.2.98
+ system.adapter.statistics.0            : statistics            -  enabled
  system.adapter.tr-064.0                : tr-064                - disabled
+ system.adapter.trashschedule.0         : trashschedule         -  enabled
  system.adapter.upnp.0                  : upnp                  - disabled
  system.adapter.vis-bars.0              : vis-bars              -  enabled
  system.adapter.vis-colorpicker.0       : vis-colorpicker       -  enabled
  system.adapter.vis-fancyswitch.0       : vis-fancyswitch       -  enabled
  system.adapter.vis-hqwidgets.0         : vis-hqwidgets         -  enabled
  system.adapter.vis-jqui-mfd.0          : vis-jqui-mfd          -  enabled
  system.adapter.vis-timeandweather.0    : vis-timeandweather    -  enabled
  system.adapter.vis.0                   : vis                   -  enabled
+ system.adapter.web.0                   : web                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                 : admin                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0              : influxdb              -  enabled, port: 8086
+ system.adapter.node-red.0              : node-red              -  enabled, port: 1880, bind: 192.168.2.98
+ system.adapter.web.0                   : web                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest): http://download.iobroker.net/sources-dist-latest.json

Active repo: Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
hash changed or no sources cached => force download of new sources
Cannot get any information of "_repoInfo". Ignored.
update done
Adapter    "admin"         : 6.13.15  , installed 4.1.11 [Updateable]
Adapter    "backitup"      : 2.9.8    , installed 2.9.8
Adapter    "discovery"     : 4.2.0    , installed 4.2.0
Adapter    "ical"          : 1.13.3   , installed 1.7.4 [Updateable]
Adapter    "icons-mfd-png" : 1.2.1    , installed 1.2.1
Adapter    "influxdb"      : 3.2.0    , installed 1.9.4 [Updateable]
Adapter    "info"          : 2.0.0    , installed 1.7.10 [Updateable]
Adapter    "javascript"    : 7.1.6    , installed 4.8.4 [Updateable]
Controller "js-controller" : 5.0.17   , installed 3.1.6 [Updateable]
Adapter    "knx"           : 2.0.24   , installed 1.0.39 [Updateable]
Adapter    "linux-control" : 1.1.5    , installed 1.1.2 [Updateable]
Adapter    "node-red"      : 5.1.0    , installed 2.0.1 [Updateable]
Adapter    "simple-api"    : 2.7.2    , installed 2.7.2
Adapter    "socketio"      : 6.6.0    , installed 6.6.0
Adapter    "statistics"    : 2.4.0    , installed 1.0.2 [Updateable]
Adapter    "tr-064"        : 4.2.18   , installed 4.2.18
Adapter    "trashschedule" : 2.3.0    , installed 1.0.3 [Updateable]
Adapter    "upnp"          : 1.0.21   , installed 1.0.17 [Updateable]
Adapter    "vis"           : 1.5.4    , installed 1.3.4 [Updateable]
Adapter    "vis-bars"      : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.0.3   , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-hqwidgets" : 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-timeandweather": 1.2.2   , installed 1.2.2
Adapter    "web"           : 6.2.3    , installed 3.1.0 [Updateable]

Objects and States
Please stand by - This may take a while
Objects:        3504
States:         2428

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 https://repos.influxdata.com/debian buster InRelease [7047 B]
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Err:3 https://repos.influxdata.com/debian buster InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E

[Frank-KNX]

Hier der Auszug aus dem "iob diag".
ich hoffe, dass ich mit Copy und paste alles korekt gemacht habe..
Hoffe, dass hilft für Diagnose.

[Thomas Braun]

@frank-knx

Raspbian GNU/Linux 10 (buster)

Ist tot, muss durch Version 12 'Bookworm' erstetzt werden. Neuinstallation als 64Bit-Version, wenn der ioBroker später up-to-date ist und du ein Backup davon gezogen hast.

sudo rm /etc/apt/sources.list.d/infl*
wget -q https://repos.influxdata.com/influxdata-archive_compat.key
echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata-archive_compat.gpg > /dev/null
echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
rm influxdata-archive_compat.key
iob stop
sudo apt update
sudo apt full-upgrade
sudo reboot

Wenn die Kiste wieder erreichbar ist nochmal ein

iob diag

Diesmal aber bitte vollständig. Bis zur zweiten Kopiermarke.

[Frank-KNX]

Hier gehts weiter mit Teil, der später ergänzt wurde:

W: Some index files failed to download. They have been ignored, or old ones used instead.
E: Broken packages
Pending Updates:

*** Listening Ports ***
Active Internet connections (only servers)

Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       56298      4883/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       56297      4883/iobroker.js-co
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          19548      545/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          16869      429/cupsd
tcp        0      0 192.168.2.98:1880       0.0.0.0:*               LISTEN      1001       59193      5432/node-red
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        16895      437/influxd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       58127      4901/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       61575      5493/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        19360      437/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          19558      545/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          16868      429/cupsd
udp        0      0 192.168.2.98:54637      0.0.0.0:*                           1001       59054      4954/io.knx.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          16932      468/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          17768      509/cups-browsed
udp        0      0 0.0.0.0:36572           0.0.0.0:*                           108        16048      411/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        16046      411/avahi-daemon: r
udp6       0      0 :::33610                :::*                                108        16049      411/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          17164      468/dhcpcd
udp6       0      0 :::5353                 :::*                                108        16047      411/avahi-daemon: r

*** Log File - Last 25 Lines ***

[Frank-KNX]

So, hier nun nochmal alles von den beiden Marken:

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.63-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 22:44:41 up  4:00,  3 users,  load average: 0.34, 0.22, 0.27
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Fri 2024-02-02 22:44:41 CET
           Universal time: Fri 2024-02-02 21:44:41 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.9G        975M        5.9G         50M        1.1G        6.7G
Swap:           99M          0B         99M
Total:         8.0G        975M        6.0G

         7898 M total memory
          975 M used memory
          534 M active memory
         1296 M inactive memory
         5866 M free memory
          134 M buffer memory
          922 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT                  LOAD   ACTIVE SUB    DESCRIPTION
* bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      117G  9.5G  103G   9% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  8.7M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M  4.0K  790M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Feb  2 18:43:58 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D3:7A:A7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=def5eda3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Fri Feb  2 18:43:59 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Feb  2 18:43:59 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Feb  2 18:44:01 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET                SOURCE         FSTYPE          OPTIONS
/                     /dev/mmcblk0p2 ext4            rw,noatime
|-/sys/fs/bpf         none           bpf             rw,nosuid,nodev,noexec,relatime,mode=700
|-/run/user/1000/gvfs gvfsd-fuse     fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
`-/boot               /dev/mmcblk0p1 vfat            rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
914M    /var/
552M    /var/cache
539M    /var/cache/apt
480M    /var/cache/apt/archives
248M    /var/lib

Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
101M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
148M    /opt/iobroker/iobroker-data/
69M     /opt/iobroker/iobroker-data/files
59M     /opt/iobroker/iobroker-data/backup-objects
16M     /opt/iobroker/iobroker-data/files/javascript.admin
13M     /opt/iobroker/iobroker-data/files/vis.0

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/objects.json.bak
6.3M    /opt/iobroker/iobroker-data/objects.json
4.7M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/2.7e0b7583.chunk.js.map
3.5M    /opt/iobroker/iobroker-data/files/vis.0/Grundriss_final.png
3.4M    /opt/iobroker/iobroker-data/files/vis.0/Parkplatz.jpg

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.0.0
/usr/bin/node           v18.0.0
/usr/bin/npm            8.6.0
/usr/bin/npx            8.6.0
/usr/bin/corepack       0.10.0


nodejs:
  Installed: 18.0.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
 *** 18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: file
States  type: file

Core adapters versions
js-controller:  3.1.6
admin:          4.1.11
javascript:     4.8.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                 : admin                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.discovery.0             : discovery             -  enabled
  system.adapter.ical.0                  : ical                  -  enabled
  system.adapter.icons-mfd-png.0         : icons-mfd-png         -  enabled
+ system.adapter.influxdb.0              : influxdb              -  enabled, port: 8086
+ system.adapter.info.0                  : info                  -  enabled
+ system.adapter.javascript.0            : javascript            -  enabled
+ system.adapter.knx.0                   : knx                   -  enabled, bind: 192.168.2.98
+ system.adapter.linux-control.0         : linux-control         -  enabled
+ system.adapter.meldungsliste.0         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.1         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.10        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.11        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.12        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.13        : meldungsliste         -  enabled
+ system.adapter.meldungsliste.2         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.3         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.4         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.5         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.6         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.7         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.8         : meldungsliste         -  enabled
+ system.adapter.meldungsliste.9         : meldungsliste         -  enabled
+ system.adapter.node-red.0              : node-red              -  enabled, port: 1880, bind: 192.168.2.98
+ system.adapter.statistics.0            : statistics            -  enabled
  system.adapter.tr-064.0                : tr-064                - disabled
+ system.adapter.trashschedule.0         : trashschedule         -  enabled
  system.adapter.upnp.0                  : upnp                  - disabled
  system.adapter.vis-bars.0              : vis-bars              -  enabled
  system.adapter.vis-colorpicker.0       : vis-colorpicker       -  enabled
  system.adapter.vis-fancyswitch.0       : vis-fancyswitch       -  enabled
  system.adapter.vis-hqwidgets.0         : vis-hqwidgets         -  enabled
  system.adapter.vis-jqui-mfd.0          : vis-jqui-mfd          -  enabled
  system.adapter.vis-timeandweather.0    : vis-timeandweather    -  enabled
  system.adapter.vis.0                   : vis                   -  enabled
+ system.adapter.web.0                   : web                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                 : admin                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0              : influxdb              -  enabled, port: 8086
+ system.adapter.node-red.0              : node-red              -  enabled, port: 1880, bind: 192.168.2.98
+ system.adapter.web.0                   : web                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest): http://download.iobroker.net/sources-dist-latest.json

Active repo: Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
hash changed or no sources cached => force download of new sources
Cannot get any information of "_repoInfo". Ignored.
update done
Adapter    "admin"         : 6.13.15  , installed 4.1.11 [Updateable]
Adapter    "backitup"      : 2.9.8    , installed 2.9.8
Adapter    "discovery"     : 4.2.0    , installed 4.2.0
Adapter    "ical"          : 1.13.3   , installed 1.7.4 [Updateable]
Adapter    "icons-mfd-png" : 1.2.1    , installed 1.2.1
Adapter    "influxdb"      : 3.2.0    , installed 1.9.4 [Updateable]
Adapter    "info"          : 2.0.0    , installed 1.7.10 [Updateable]
Adapter    "javascript"    : 7.1.6    , installed 4.8.4 [Updateable]
Controller "js-controller" : 5.0.17   , installed 3.1.6 [Updateable]
Adapter    "knx"           : 2.0.24   , installed 1.0.39 [Updateable]
Adapter    "linux-control" : 1.1.5    , installed 1.1.2 [Updateable]
Adapter    "node-red"      : 5.1.0    , installed 2.0.1 [Updateable]
Adapter    "simple-api"    : 2.7.2    , installed 2.7.2
Adapter    "socketio"      : 6.6.0    , installed 6.6.0
Adapter    "statistics"    : 2.4.0    , installed 1.0.2 [Updateable]
Adapter    "tr-064"        : 4.2.18   , installed 4.2.18
Adapter    "trashschedule" : 2.3.0    , installed 1.0.3 [Updateable]
Adapter    "upnp"          : 1.0.21   , installed 1.0.17 [Updateable]
Adapter    "vis"           : 1.5.4    , installed 1.3.4 [Updateable]
Adapter    "vis-bars"      : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.0.3   , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-hqwidgets" : 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-timeandweather": 1.2.2   , installed 1.2.2
Adapter    "web"           : 6.2.3    , installed 3.1.0 [Updateable]

Objects and States
Please stand by - This may take a while
Objects:        3504
States:         2428

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 https://repos.influxdata.com/debian buster InRelease [7047 B]
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Err:3 https://repos.influxdata.com/debian buster InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Fetched 7047 B in 9s (744 B/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
E: Broken packages
Pending Updates:

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       56298      4883/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       56297      4883/iobroker.js-co
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          19548      545/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          16869      429/cupsd
tcp        0      0 192.168.2.98:1880       0.0.0.0:*               LISTEN      1001       59193      5432/node-red
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        16895      437/influxd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       58127      4901/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       61575      5493/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        19360      437/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          19558      545/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          16868      429/cupsd
udp        0      0 192.168.2.98:54637      0.0.0.0:*                           1001       59054      4954/io.knx.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          16932      468/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          17768      509/cups-browsed
udp        0      0 0.0.0.0:36572           0.0.0.0:*                           108        16048      411/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        16046      411/avahi-daemon: r
udp6       0      0 :::33610                :::*                                108        16049      411/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          17164      468/dhcpcd
udp6       0      0 :::5353                 :::*                                108        16047      411/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-02-02 22:46:00.781  - info: knx.0 (4954) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2024-02-02 22:46:00.781  - info: knx.0 (4954) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2024-02-02 22:46:00.781  - info: knx.0 (4954) =====> STATE_TUNNELING_ACK
2024-02-02 22:46:00.783  - info: knx.0 (4954) ( 4 ) Sending Tunnel_Request ACK  : 06 10 04 21 00 0a 04 4e e5 00   ChID : 78 SeqCntIN : 229 SeqCntOUT : 25 queue length : 0
2024-02-02 22:46:00.783  - info: knx.0 (4954) ( 4.b ) return to STATE_READY, processing : false
2024-02-02 22:46:00.784  - info: knx.0 (4954) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
2024-02-02 22:46:04.851  - info: knx.0 (4954) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK )         :    06 10 04 20 00 17 04 4e e6 00 29 00 bc c0 12 49 23 03 03 00 80 02 26   ChID: 78
2024-02-02 22:46:04.852  - info: knx.0 (4954) WRITE : mappedName : Temperatur Wasser Teich    dest : 4/3/3  val: 5.5   (DPT9.001) Temperatur_Wasser_Teich
2024-02-02 22:46:04.852  - info: knx.0 (4954) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2024-02-02 22:46:04.853  - info: knx.0 (4954) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2024-02-02 22:46:04.853  - info: knx.0 (4954) =====> STATE_TUNNELING_ACK
2024-02-02 22:46:04.854  - info: knx.0 (4954) ( 4 ) Sending Tunnel_Request ACK  : 06 10 04 21 00 0a 04 4e e6 00   ChID : 78 SeqCntIN : 230 SeqCntOUT : 25 queue length : 0
2024-02-02 22:46:04.854  - info: knx.0 (4954) ( 4.b ) return to STATE_READY, processing : false
2024-02-02 22:46:04.854  - info: knx.0 (4954) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
2024-02-02 22:46:06.513  - info: meldungsliste.8 (5708) state 0_userdata.0.DSL_Status_Fritzbox updated: true (ack = false)
2024-02-02 22:46:06.514  - info: meldungsliste.8 (5708) trigger:false
2024-02-02 22:46:06.514  - info: meldungsliste.8 (5708) value:true
2024-02-02 22:46:06.554  - info: knx.0 (4954) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK )         :    06 10 04 20 00 19 04 4e e7 00 29 00 bc c0 12 3c 28 04 05 00 80 42 fa 00 00   ChID: 78
2024-02-02 22:46:06.555  - info: knx.0 (4954) WRITE : mappedName : Leistung    dest : 5/0/4  val: 125   (DPT14.056) Leistung
2024-02-02 22:46:06.555  - info: knx.0 (4954) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2024-02-02 22:46:06.555  - info: knx.0 (4954) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2024-02-02 22:46:06.556  - info: knx.0 (4954) =====> STATE_TUNNELING_ACK
2024-02-02 22:46:06.557  - info: knx.0 (4954) ( 4 ) Sending Tunnel_Request ACK  : 06 10 04 21 00 0a 04 4e e7 00   ChID : 78 SeqCntIN : 231 SeqCntOUT : 25 queue length : 0
2024-02-02 22:46:06.557  - info: knx.0 (4954) ( 4.b ) return to STATE_READY, processing : false
2024-02-02 22:46:06.557  - info: knx.0 (4954) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)

============ Mark until here for C&P =============

[Frank-KNX]

Und hier noch das nachfolgende Summary:

======================= SUMMARY =======================
                        v.2023-10-10


   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.63-v7l+
      Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               armhf
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
X-Server:               true
Boot Target:            graphical.target

Pending OS-Updates:
Pending iob updates:    14

Nodejs-Installation:    /usr/bin/nodejs         v18.0.0
                        /usr/bin/node           v18.0.0
                        /usr/bin/npm            8.6.0
                        /usr/bin/npx            8.6.0
                        /usr/bin/corepack       0.10.0

Recommended versions are nodejs  and npm
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        5.6G         50M        1.1G        6.5G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        5.7G

Active iob-Instances:   26
Active repo: Stable (default)

ioBroker Core:          js-controller           3.1.6
                        admin                   4.1.11

ioBroker Status:        iobroker is running on this host.

At least one iobroker host is running.

Objects type: file
States  type: file

Status admin and web instance:
+ system.adapter.admin.0                 : admin                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                   : web                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                3504
States:                 2428

Size of iob-Database:

6.3M    /opt/iobroker/iobroker-data/objects.json.bak
6.3M    /opt/iobroker/iobroker-data/objects.json
652K    /opt/iobroker/iobroker-data/states.json.bak
652K    /opt/iobroker/iobroker-data/states.json



=================== END OF SUMMARY ====================

[Frank-KNX]

@thomas-braun

Jetzt was ich raus.

Also verstanden, dass ich nach dem Update des iobrokers und den Adaptern.. und deren Sicherung danach auf ein moderneres Betriebssystem wechseln soll.

Was wolltest du mir mit den Auszug sudo rm /etc.... mitteilen ?

[Thomas Braun]

@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:

Was wolltest du mir mit den Auszug sudo rm /etc.... mitteilen ?

Das ist kein Auszug, das ist das was du in dein Terminal eingeben sollst.
Am besten zeilenweise kopieren und einfügen.

[Frank-KNX]

@thomas-braun

Hallo Thomas, leider nach der ersten Zeile bereits Fehlermeldung als Antwort.

pi@raspberrypi:~ $ sudo rm /etc/apt/sources.list.d/infl*
rm: das Entfernen von '/etc/apt/sources.list.d/infl*' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi:~ $