Vis2 ab 09.01.2024 im stable

Santos

@thomas-braun Ich installiere es direkt als Adapter, oder was meinst du?
Es werden zuerst alle Objekte runtergeladen und nacheinander installiert, dauert ziemlich lange. Am Ende kommt aber dann die Zeile mit dem Fehlercode 32. Liegt es vielleicht daran, dass ich meine ganze iobroker Instanz (js, npm) seit einem Jahr nicht geupdatet habe? Eigentlich handele ich immer nach dem Prinzip never touching a running system.

Thomas Braun

@santos

Ja, das ist ganz sicher der Grund...

iob diag

sagt zu der Kiste?

Homoran

@santos sagte in Vis2 ab morgen im stable:

Eigentlich handele ich immer nach dem Prinzip never touching a running system.

und diese Einstellung führt jetzt zu deinem Problem, bis hin zu einer nie mehr fixbaren Installation.

Santos

pi@raspberrypi:~ $ iob diag
iobroker [command]

Commands:
 iobroker setup                                               Setup ioBroker
 iobroker start [all|<adapter>.<instance>]                    Starts the js-controller or a specified adapter instance
 iobroker stop [<adapter>.<instance>]                         stops the js-controller or a specified adapter instance
 iobroker restart [<adapter>.<instance>]                      Restarts js-controller or a specified adapter instance  [aliases: r]
 iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
 iobroker info                                                Shows the host info
 iobroker logs [<adapter>]                                    Monitor log
 iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
 iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
 iobroker rebuild [<module>]                                  Rebuild all native modules or path
 iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
 iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
 iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
 iobroker update [<repositoryUrl>]                            Update repository and list adapters
 iobroker upgrade                                             Upgrade management
 iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
 iobroker object                                              Object management  [aliases: o]
 iobroker state                                               State management  [aliases: s]
 iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
 iobroker list <type> [<filter>]                              List all entries, like objects
 iobroker chmod <mode> <file>                                 Change file rights
 iobroker chown <user> <group> <file>                         Change file ownership
 iobroker touch <file>                                        Touch file
 iobroker rm <file>                                           Remove file
 iobroker file                                                File management
 iobroker user                                                User commands
 iobroker group                                               group management
 iobroker host <hostname>                                     Set host to given hostname
 iobroker set <adapter>.<instance>                            Change settings of adapter config
 iobroker license <license.file or license.text>              Update license by given file
 iobroker cert                                                Certificate management
 iobroker clean <yes>                                         Clears all objects and states
 iobroker backup                                              Create backup
 iobroker restore <backup name or path>                       Restore a specified backup
 iobroker validate <backup name or path>                      Validate a specified backup
 iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
 iobroker repo [<name>]                                       Show repo information
 iobroker uuid                                                Show uuid of the installation  [aliases: id]
 iobroker unsetup                                             Reset license, installation secret and language
 iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
 iobroker multihost                                           Multihost management
 iobroker compact                                             compact group management
 iobroker plugin                                              Plugin management
 iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
 --help  Show help  [boolean]

MOD-EDIT: Code in code-tags gesetzt!

Thomas Braun

@santos

Dann fangen wir ganz unten an...

iob stop
iob fix
iob start

Und dann nochmal

iob diag

Homoran

@santos ja, so alt, dass es die Befehle nicht kennt.
Das gibt jetzt Arbeit

Santos

Ich sehe, wie alt die ganze Kiste ist...

======================= SUMMARY =======================
                       v.2023-10-10


  Static hostname: raspberrypi
        Icon name: computer
 Operating System: Raspbian GNU/Linux 10 (buster)
           Kernel: Linux 5.10.103-v7l+
     Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               armhf
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:
Pending iob updates:    5

Nodejs-Installation:    /usr/bin/nodejs         v17.6.0
                       /usr/bin/node           v17.6.0
                       /usr/bin/npm            8.5.1
                       /usr/bin/npx            8.5.1
                       /usr/bin/corepack       0.10.0

Recommended versions are nodejs  and npm
Your nodejs installation is correct

MEMORY:
             total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        4.7G        395M        2.1G        6.3G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        4.8G

Active iob-Instances:   19
Active repo(s): stable

ioBroker Core:          js-controller           4.0.18
                       admin                   6.12.0

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                7577
States:                 9682

Size of iob-Database:

12M     /opt/iobroker/iobroker-data/objects.jsonl
8.5M    /opt/iobroker/iobroker-data/objects.json.migrated
8.4M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
3.4M    /opt/iobroker/iobroker-data/states.jsonl
2.1M    /opt/iobroker/iobroker-data/states.json.migrated
2.1M    /opt/iobroker/iobroker-data/states.json.bak.migrated



=================== END OF SUMMARY ====================

Homoran

@santos bitte die Langfassung

Santos

@homoran sagte in Vis2 ab morgen im stable:

@santos bitte die Langfassung

Es läuft. Vermutlich schickt ihr mich gleich die nodejs, npm und js-controller zu updaten

Thomas Braun

@santos sagte in Vis2 ab morgen im stable:

Raspbian GNU/Linux 10 (buster)

Ist tot.
Installier da NEU! ein Raspberry OS 12 in der 64Bit-Lite-Version.

iob nodejs-update

bringt die Basis auf Stand.
Dann die 5 iob-Adapter aktualisieren, als letztes den js-controller:

iob update
iob upgrade all
iob stop
iob upgrade self
iob start

Und dann sollte auch vis-2 installierbar sein.
Davon dann ein Backup erstellen und zeitnah auf ein frisches System umziehen.

Santos

@santos sagte in Vis2 ab morgen im stable:

@homoran sagte in Vis2 ab morgen im stable:

@santos bitte die Langfassung

Es läuft. Vermutlich schickt ihr mich gleich die nodejs, npm und js-controller zu updaten

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 21:35:31 up 46 days, 59 min,  2 users,  load average: 0.96, 1.29, 1.37
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Fri 2024-02-02 21:35:31 CET
           Universal time: Fri 2024-02-02 20:35:31 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        4.6G        395M        2.1G        6.3G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        4.7G

         7898 M total memory
         1207 M used memory
          869 M active memory
         2182 M inactive memory
         4617 M free memory
          233 M buffer memory
         1839 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  8.1G   48G  15% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  396M  3.5G  11% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Dec 18 20:35:49 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:E2:25:2C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=848b4126-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Mon Dec 18 20:35:50 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Mon Dec 18 20:35:50 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Mon Dec 18 20:35:52 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
515M    /var/
193M    /var/cache
181M    /var/cache/apt
125M    /var/lib
122M    /var/cache/apt/archives

Archived and active journals take up 394.7M in the file system.

/opt/iobroker/backups:
17M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
540M    /opt/iobroker/iobroker-data/files
385M    /opt/iobroker/iobroker-data/history
138M    /opt/iobroker/iobroker-data/files/vis-2
124M    /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
22M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map
19M     /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map
18M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.e642d05b.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v17.6.0
/usr/bin/node           v17.6.0
/usr/bin/npm            8.5.1
/usr/bin/npx            8.5.1
/usr/bin/corepack       0.10.0


nodejs:
  Installed: 17.6.0-deb-1nodesource1
  Candidate: 17.6.0-deb-1nodesource1
  Version table:
 *** 17.6.0-deb-1nodesource1 100
        100 /var/lib/dpkg/status
     14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.18
admin:          6.12.0
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.fronius.0                : fronius               : raspberrypi                              -  enabled
  system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.jarvis.0                 : jarvis                : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.mihome.0                 : mihome                : raspberrypi                              -  enabled, port: 9898, bind: 192.168.1.32
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.pushover.0               : pushover              : raspberrypi                              -  enabled
  system.adapter.pvforecast.0             : pvforecast            : raspberrypi                              - disabled
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mihome.0                 : mihome                : raspberrypi                              -  enabled, port: 9898, bind: 192.168.1.32
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.15  , installed 6.12.0 [Updatable]
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "backitup"     : 2.9.8    , installed 2.8.7  [Updatable]
Adapter    "daswetter"    : 3.1.13   , installed 3.1.13
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "fronius"      : 2.0.2    , installed 2.0.2
Adapter    "fronius-solarweb": 0.0.3 , installed 0.0.3
Adapter    "fullybrowser" : 3.0.9    , installed 2.1.2  [Updatable]
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 4.0.18 [Updatable]
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "modbus"       : 6.1.0    , installed 6.1.0
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.1
Adapter    "reolink"      : 1.0.3    , installed 1.0.3
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "schoolfree"   : 1.1.3    , installed 1.1.3
Adapter    "shuttercontrol": 1.6.3   , installed 1.6.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "telegram"     : 3.0.1    , installed 3.0.1
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-2"        : 2.9.11   , installed 2.9.11
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 2.1.0    , installed 2.1.0
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "web"          : 6.2.3    , installed 6.2.3
Adapter    "webuntis"     : 0.3.4    , installed 0.3.4
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.5.10   , installed 2.5.10
Adapter    "zigbee"       : 1.10.1   , installed 1.8.24 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        7577
States:         9681

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 https://deb.nodesource.com/node_14.x buster InRelease [4584 B]
Get:4 https://pkgs.tailscale.com/stable/raspbian buster InRelease
Fetched 11.1 kB in 6s (1945 B/s)
Reading package lists...
E: Broken packages
Pending Updates:

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       54870218   6832/io.jarvis.0
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      0          16284      522/dnsmasq
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          16312      537/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          53797492   9084/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       54865841   6654/io.sonoff.0
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       54868268   6606/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       54863717   6217/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       54863710   6217/iobroker.js-co
tcp        0      0 0.0.0.0:5900            0.0.0.0:*               LISTEN      0          16961      510/vncserver-x11-c
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       54862302   6237/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       54866932   6824/io.web.0
tcp6       0      0 :::53                   :::*                    LISTEN      0          16286      522/dnsmasq
tcp6       0      0 :::22                   :::*                    LISTEN      0          16314      537/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          53797491   9084/cupsd
tcp6       0      0 :::5900                 :::*                    LISTEN      0          16960      510/vncserver-x11-c
udp        0      0 0.0.0.0:59828           0.0.0.0:*                           108        15850      403/avahi-daemon: r
udp        0      0 0.0.0.0:53              0.0.0.0:*                           0          16283      522/dnsmasq
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          18815      457/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          53796127   9086/cups-browsed
udp        0      0 0.0.0.0:41641           0.0.0.0:*                           0          30663282   639/tailscaled
udp        0      0 0.0.0.0:9898            0.0.0.0:*                           1001       54867124   6527/io.mihome.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        15848      403/avahi-daemon: r
udp6       0      0 :::40928                :::*                                108        15851      403/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          21396      457/dhcpcd
udp6       0      0 :::53                   :::*                                0          16285      522/dnsmasq
udp6       0      0 :::41641                :::*                                0          30663281   639/tailscaled
udp6       0      0 :::5353                 :::*                                108        15849      403/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-02-02 21:29:02.192  - info: sonoff.0 (6654) Client [Sonoff-Rollo-K1] connected with secret 1706905742191_7543
2024-02-02 21:29:02.202  - info: sonoff.0 (6654) Client [Sonoff-Rollo-K2] connected with secret 1706905742201_9385
2024-02-02 21:29:02.468  - info: sonoff.0 (6654) Client [Sonoff-Gastherme] connected with secret 1706905742467_1880
2024-02-02 21:29:02.708  - info: sonoff.0 (6654) Client [Sonoff-Touch-Lara] connected with secret 1706905742707_7343
2024-02-02 21:29:02.716  - info: sonoff.0 (6654) Client [Sonoff-Heizung-PV] connected with secret 1706905742710_9766
2024-02-02 21:29:43.287  - info: alexa2.0 (6404) Unknown Device, but enabling commands, Try it and report back if commands work.
2024-02-02 21:29:43.288  - info: alexa2.0 (6404) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted
2024-02-02 21:29:43.288  - info: alexa2.0 (6404)     Device-type:A1CFVS523BQYZ7 - Oleg's Mi Watch (Mi Watch) (SLEEP,SUPPORTS_LOCALE_SWITCH,TIMERS_AND_ALARMS,DEEZER,VOLUME_SETTING,KINDLE_BOOKS,SET_LOCALE,AMAZON_MUSIC,SIRIUSXM,REMINDERS,DEREGISTER_DEVICE,CHANGE_NAME,AUDIBLE,I_HEART_RADIO,SUPPORTS_LOCALE,ADAPTIVE_LISTENING,TIDAL,ASCENDING_ALARM_VOLUME,DIALOG_INTERFACE_VERSION,PERSISTENT_CONNECTION,MICROPHONE,SPEECH_RECOGNIZER_USS,SOUND_SETTINGS,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,CUSTOM_ALARM_TONE,TOUCH_INITIATED,DREAM_TRAINING,TIMERS_ALARMS_NOTIFICATIONS_VOLUME,TUNE_IN,MUSIC_SKILL,MULTI_WAKEWORDS_SUPPORTED,GOLDFISH,SET_TIME_ZONE,APPLE_MUSIC,EARCONS,AUDIO_PLAYER)
2024-02-02 21:29:57.566  - info: alexa2.0 (6404) Using cached smart home devices list from Fri Feb 02 2024 21:12:52 GMT+0100 (Mitteleuropäische Normalzeit)
2024-02-02 21:29:59.018  - info: alexa2.0 (6404) No smart home devices to query
2024-02-02 21:29:59.918  - info: alexa2.0 (6404) Subscribing to states...
2024-02-02 21:29:59.931  - info: alexa2.0 (6404) Deleting the following states: ["Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876","Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876.#enabled","Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876.#delete"]
2024-02-02 21:30:00.188  - info: host.raspberrypi instance system.adapter.daswetter.0 started with pid 8110
2024-02-02 21:30:02.476  - info: alexa2.0 (6404) Alexa-Push-Connection (macDms = true) established. Disable Polling
2024-02-02 21:30:02.641  - info: daswetter.0 (8110) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2024-02-02 21:30:02.853  - info: daswetter.0 (8110) starting. Version 3.1.13 in /opt/iobroker/node_modules/iobroker.daswetter, node: v17.6.0, js-controller: 4.0.18
2024-02-02 21:30:11.044  - info: daswetter.0 (8110) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2024-02-02 21:30:11.565  - info: daswetter.0 (8110) cleaned everything up...
2024-02-02 21:30:11.597  - info: host.raspberrypi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-02-02 21:30:18.813  - info: alexa2.0 (6404) Initialization Done ...
2024-02-02 21:32:48.987  - info: admin.0 (6237) <== Disconnect system.user.admin from ::ffff:192.168.1.64
2024-02-02 21:34:46.737  - info: admin.0 (6237) <== Disconnect system.user.admin from ::ffff:192.168.1.64 admin
2024-02-02 21:34:48.077  - info: jarvis.0 (6832) Client with IP 192.168.1.64 connected.
2024-02-02 21:34:51.027  - info: jarvis.0 (6832) Client with IP 192.168.1.64 disconnected.
2024-02-02 21:34:54.795  - info: admin.0 (6237) ==> Connected system.user.admin from ::ffff:192.168.1.64

============ Mark until here for C&P =============

Thomas Braun

@santos sagte in Vis2 ab morgen im stable:

Vermutlich schickt ihr mich gleich die nodejs, npm und js-controller zu updaten

Selbstverständlich.

Homoran

@santos sagte in Vis2 ab morgen im stable:

Vermutlich schickt ihr mich gleich die nodejs, npm und js-controller zu updaten

Alleine schon deswegen, weil ungerade nodejs Versionen nur Entwicklerversionen sind, npm immer nur mit nodejs zusammen installiert werden soll und der Controller v5 Bedingung für vis2 ist

Thomas Braun

@santos sagte in Vis2 ab morgen im stable:

E: Broken packages

Deine Paketdatenbank ist inkonsistent.

sudo apt update
sudo apt full-upgrade

zeigen.

Santos

So, jetzt fertig.

Skript v.2023-10-10

*** BASE SYSTEM ***
  Static hostname: raspberrypi
        Icon name: computer
 Operating System: Raspbian GNU/Linux 10 (buster)
           Kernel: Linux 5.10.103-v7l+
     Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
22:11:07 up 46 days,  1:35,  2 users,  load average: 1.61, 3.09, 2.87
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

This system needs to be REBOOTED!


*** Time and Time Zones ***
              Local time: Fri 2024-02-02 22:11:07 CET
          Universal time: Fri 2024-02-02 21:11:07 UTC
                RTC time: n/a
               Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
             NTP service: active
         RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin g                                                                                                                                                             pio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
             total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        3.2G        395M        3.5G        6.3G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        3.3G

        7898 M total memory
        1200 M used memory
        1004 M active memory
        3455 M inactive memory
        3189 M free memory
         262 M buffer memory
        3246 M swap cache
          99 M total swap
           0 M used swap
          99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  8.3G   48G  15% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  396M  3.5G  11% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Dec 18 20:35:49 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0                                                                                                                                                              snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC                                                                                                                                                             :A6:32:E2:25:2C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=t                                                                                                                                                             tyS0,115200 console=tty1 root=PARTUUID=848b4126-02 rootfstype=ext4 elevator=dead                                                                                                                                                             line fsck.repair=yes rootwait
[Mon Dec 18 20:35:50 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered                                                                                                                                                              data mode. Opts: (null)
[Mon Dec 18 20:35:50 2023] VFS: Mounted root (ext4 filesystem) readonly on devic                                                                                                                                                             e 179:2.
[Mon Dec 18 20:35:52 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=4                                                                                                                                                             37,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
516M    /var/
193M    /var/cache
182M    /var/cache/apt
125M    /var/lib
122M    /var/cache/apt/archives

Archived and active journals take up 394.7M in the file system.

/opt/iobroker/backups:
17M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
540M    /opt/iobroker/iobroker-data/files
385M    /opt/iobroker/iobroker-data/history
138M    /opt/iobroker/iobroker-data/files/vis-2
124M    /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.m                                                                                                                                                             ap
22M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.m                                                                                                                                                             ap
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.j                                                                                                                                                             s.map
19M     /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc                                                                                                                                                             3820.js.map
18M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.e642d05b.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always                                                                                                                                                              prefer the links 'by-id':

/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
 Installed: 18.19.0-1nodesource1
 Candidate: 18.19.0-1nodesource1
 Version table:
*** 18.19.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
       100 /var/lib/dpkg/status
    18.18.2-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.18.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.18.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.17.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.17.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.16.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.16.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.15.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.14.2-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.14.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.14.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.13.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.12.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.11.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.10.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.9.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.9.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.8.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.7.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.6.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.5.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.4.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.3.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.2.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.1.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.0.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    10.24.0~dfsg-1~deb10u3 500
       500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.13.15
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                                                                                                                                                                                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admi                                                                                                                                                             n
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                                                                                                                                                                                           -  enabled
 system.adapter.daswetter.0              : daswetter             : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.fronius.0                : fronius               : raspberrypi                                                                                                                                                                                           -  enabled
 system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                                                                                                                                                                                           - disabled
+ system.adapter.history.0                : history               : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.jarvis.0                 : jarvis                : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                                                                                                                                                                                           -  enabled
+ system.adapter.mihome.0                 : mihome                : raspberrypi                                                                                                                                                                                           -  enabled, port: 9898, bind: 192.168.1.32
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                                                                                                                                                                                           -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.pushover.0               : pushover              : raspberrypi                                                                                                                                                                                           -  enabled
 system.adapter.pvforecast.0             : pvforecast            : raspberrypi                                                                                                                                                                                           - disabled
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                                                                                                                                                                                           -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                                                                                                                                                                                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                                                                                                                                                                                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                                                                                                                                                                                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admi                                                                                                                                                             n
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                                                                                                                                                                                           -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                                                                                                                                                                                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admi                                                                                                                                                             n
+ system.adapter.mihome.0                 : mihome                : raspberrypi                                                                                                                                                                                           -  enabled, port: 9898, bind: 192.168.1.32
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                                                                                                                                                                                           -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                                                                                                                                                                                           -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                                                                                                                                                                                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                                                                                                                                                                                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                                                                                                                                                                                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admi                                                                                                                                                             n
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                                                                                                                                                                                           -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.15  , installed 6.13.15
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "daswetter"    : 3.1.13   , installed 3.1.13
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "fronius"      : 2.0.2    , installed 2.0.2
Adapter    "fronius-solarweb": 0.0.3 , installed 0.0.3
Adapter    "fullybrowser" : 3.0.9    , installed 2.1.2  [Updatable]
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "modbus"       : 6.1.0    , installed 6.1.0
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.1
Adapter    "reolink"      : 1.0.3    , installed 1.0.3
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "schoolfree"   : 1.1.3    , installed 1.1.3
Adapter    "shuttercontrol": 1.6.3   , installed 1.6.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "telegram"     : 3.0.1    , installed 3.0.1
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-2"        : 2.9.11   , installed 2.9.11
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 2.1.0    , installed 2.1.0
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "web"          : 6.2.3    , installed 6.2.3
Adapter    "webuntis"     : 0.3.4    , installed 0.3.4
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.5.10   , installed 2.5.10
Adapter    "zigbee"       : 1.10.1   , installed 1.8.24 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        7581
States:         9658

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Get:4 https://pkgs.tailscale.com/stable/raspbian buster InRelease
Fetched 6564 B in 3s (2131 B/s)
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       54931202   14511/io.jarvis.0
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      0          16284      522/dnsmasq
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          54988018   27703/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          54986327   27773/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       54928185   14328/io.sonoff.0
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       54928156   14270/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       54927526   13964/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       54923960   13964/iobroker.js-c
tcp        0      0 0.0.0.0:5900            0.0.0.0:*               LISTEN      0          16961      510/vncserver-x11-c
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       54926940   13982/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       54931003   14478/io.web.0
tcp6       0      0 :::53                   :::*                    LISTEN      0          16286      522/dnsmasq
tcp6       0      0 :::22                   :::*                    LISTEN      0          54988020   27703/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          54986326   27773/cupsd
tcp6       0      0 :::5900                 :::*                    LISTEN      0          16960      510/vncserver-x11-c
udp        0      0 0.0.0.0:46015           0.0.0.0:*                           108        54987139   27929/avahi-daemon:
udp        0      0 0.0.0.0:53              0.0.0.0:*                           0          16283      522/dnsmasq
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          18815      457/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          54989164   27832/cups-browsed
udp        0      0 0.0.0.0:41641           0.0.0.0:*                           0          54983888   27133/tailscaled
udp        0      0 0.0.0.0:9898            0.0.0.0:*                           1001       54929576   14216/io.mihome.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        54987137   27929/avahi-daemon:
udp6       0      0 :::55206                :::*                                108        54987140   27929/avahi-daemon:
udp6       0      0 :::546                  :::*                                0          21396      457/dhcpcd
udp6       0      0 :::53                   :::*                                0          16285      522/dnsmasq
udp6       0      0 :::41641                :::*                                0          54983879   27133/tailscaled
udp6       0      0 :::5353                 :::*                                108        54987138   27929/avahi-daemon:

*** Log File - Last 25 Lines ***

2024-02-02 21:53:50.068  - info: info.0 (14419) State value to set for "info.0.sysinfo.cpu.info.cache-l3" has to be type "number" but received type "string"
2024-02-02 21:53:50.789  - info: discovery.0 (14593) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2024-02-02 21:53:51.458  - info: discovery.0 (14593) starting. Version 4.2.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v17.6.0, js-controller: 5.0.17
2024-02-02 21:53:51.556  - info: info.0 (14419) cpu Temp res = {"main":62.809,"cores":[],"max":62.809,"socket":[],"chipset":null}
2024-02-02 21:53:54.555  - info: fronius.0 (14661) starting. Version 2.0.2 in /opt/iobroker/node_modules/iobroker.fronius, node: v17.6.0, js-controller: 5.0.17
2024-02-02 21:54:14.769  - info: daswetter.0 (14563) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2024-02-02 21:54:15.297  - info: daswetter.0 (14563) cleaned everything up...
2024-02-02 21:54:15.410  - info: host.raspberrypi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-02-02 21:54:30.220  - info: alexa2.0 (14146) Unknown Device, but enabling commands, Try it and report back if commands work.
2024-02-02 21:54:30.222  - info: alexa2.0 (14146) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted
2024-02-02 21:54:30.223  - info: alexa2.0 (14146)     Device-type:A1CFVS523BQYZ7 - Oleg's Mi Watch (Mi Watch) (SLEEP,SUPPORTS_LOCALE_SWITCH,TIMERS_AND_ALARMS,DEEZER,VOLUME_SETTING,KINDLE_BOOKS,SET_LOCALE,AMAZON_MUSIC,SIRIUSXM,REMINDERS,DEREGISTER_DEVICE,CHANGE_NAME,AUDIBLE,I_HEART_RADIO,SUPPORTS_LOCALE,ADAPTIVE_LISTENING,TIDAL,ASCENDING_ALARM_VOLUME,DIALOG_INTERFACE_VERSION,PERSISTENT_CONNECTION,MICROPHONE,SPEECH_RECOGNIZER_USS,SOUND_SETTINGS,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,CUSTOM_ALARM_TONE,TOUCH_INITIATED,DREAM_TRAINING,TIMERS_ALARMS_NOTIFICATIONS_VOLUME,TUNE_IN,MUSIC_SKILL,MULTI_WAKEWORDS_SUPPORTED,GOLDFISH,SET_TIME_ZONE,APPLE_MUSIC,EARCONS,AUDIO_PLAYER)
2024-02-02 21:54:37.499  - info: alexa2.0 (14146) Using cached smart home devices list from Fri Feb 02 2024 21:47:06 GMT+0100 (Mitteleuropäische Normalzeit)
2024-02-02 21:54:38.446  - info: alexa2.0 (14146) No smart home devices to query
2024-02-02 21:54:39.378  - info: alexa2.0 (14146) Subscribing to states...
2024-02-02 21:54:39.387  - info: alexa2.0 (14146) Deleting the following states: ["Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876","Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876.#enabled","Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876.#delete"]
2024-02-02 21:54:41.421  - info: alexa2.0 (14146) Alexa-Push-Connection (macDms = true) established. Disable Polling
2024-02-02 21:54:54.670  - info: alexa2.0 (14146) Initialization Done ...
2024-02-02 22:00:00.256  - info: host.raspberrypi instance system.adapter.daswetter.0 started with pid 19160
2024-02-02 22:00:02.752  - info: daswetter.0 (19160) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2024-02-02 22:00:02.879  - info: daswetter.0 (19160) starting. Version 3.1.13 in /opt/iobroker/node_modules/iobroker.daswetter, node: v17.6.0, js-controller: 5.0.17
2024-02-02 22:00:10.894  - info: daswetter.0 (19160) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2024-02-02 22:00:11.408  - info: daswetter.0 (19160) cleaned everything up...
2024-02-02 22:00:11.427  - info: host.raspberrypi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-02-02 22:06:39.130  - info: sonoff.0 (14328) Client [Sonoff-Touch1-Tim] connection closed: closed
2024-02-02 22:06:39.528  - info: sonoff.0 (14328) Client [Sonoff-Touch1-Tim] connected with secret 1706907999526_2818

Thomas Braun

@santos sagte in Vis2 ab morgen im stable:

vncserver-x11-c

Was macht der da?

Schalt den (vermutlich in raspi-config) aus.

Den fully und zigbee auch noch updaten.

Santos

@thomas-braun sagte in Vis2 ab morgen im stable:

@santos sagte in Vis2 ab morgen im stable:

vncserver-x11-c

Was macht der da?

Schalt den (vermutlich in raspi-config) aus.

Den fully und zigbee auch noch updaten.

Den vncserver habe ich am Anfang noch genutzt, war einfach zu bedienen.

Jetzt funzt alles wieder und die VIS-2 wurde installiert. Die nächsten Tage schnuppere ich mich dann rein.
Vielen Dank für die schnelle, vor allem professionelle Hilfe!

MasterXY

Hallo zusammen,

Ich bin gerade mit der Responsive Funktion der Vis 2 am experimentieren.

Leider gibt es wenig Infos darüber.
Hat einer von euch einen Link mit Infos oder ein Beispielprojekt wie man die Responsive Funktionen der Vis 2 richtig verwendet?

Ich vermute mal die Slider in den Seiteneigenschaften repräsentieren die Breite in Pixel. Ich möchte gerne dieses Raster unterteilen bzw. zwei Spalten für manche Widgets verwenden. Damit dieses gelingt habe ich neue Seiten mit immer kleiner werdenden Spaltenbreiten angelegt und bei dem größeren Raster das View in Widget verwendet. Am Ende sind das aber sehr viele Seiten was denke ich mal so nicht gedacht ist.

Der Sinn hinter diesem Button verstehe ich auch nicht so richtig. Der begrenzt nur die Breite auf 50% und der restliche Spaltenplatz ist dann einfach leer. Ich hätte erwartet, dass man dann wenigstens ein zweites halbes Widget daneben setzen kann.

Agrippinenser

ich vermisse seit heute das Widget "tplEnergy2Consumption".

Unter "Energie-Widgets" sind nur noch die beiden "Verteilung" und "Intervallwähler" zu sehen.

Korrektur: zu früh gepostet. Issue #195

Micha 3

@agrippinenser schon mal probiert iob u vis-2
zumindest sind bei mir dann die Widget Anzeigefehler weg. Issues #318
Keine Ahnung warum ich das nach jedem Update machen muss. Achso, die CSS Daten sind dann leider auch weg. Also vorher sichern falls vorhanden.

NEWS

Vis2 ab 09.01.2024 im stable

Support us

893
Online

31.7k
Users

79.6k
Topics

1.3m
Posts

NEWS

Vis2 ab 09.01.2024 im stable

Support us

893Online

31.7kUsers

79.6kTopics

1.3mPosts

893
Online

31.7k
Users

79.6k
Topics

1.3m
Posts