Vis2 ab 09.01.2024 im stable

ostseereiter

Hallo Freunde,
Ich habe Vis2 installiert beim Aufrufen dieser hat er immer die alte Main-Visualisierung von Vis1 geladen. Dann habe ich einen neues Projekt erstellt und da funktioniert dieses nur Teilweise.

Wenn ich auf Projekte gehe werden auch die Projekte von Vis1 angezeigt soll das so?
Der vis2 Ordner hat keine Unterordner so das ich zb.Bei hinzufügen eines icons nichts drine habe

Screenshot (247).png
Was kann ich tun?

DJMarc75

@ostseereiter sagte in Vis2:

Was kann ich tun?

bitte den Titel anpassen ! Vis2 ist wie HALLO oder HURRA ... oder oder oder

zusätzlich sollte eine Frage zu Vis2 auch im entsprechenden Beta-Adapter-Beitrag zum Vis2-Adapter behandelt werden :)

edit: denn dort lesen die Betatester auch mit

ostseereiter

@djmarc75
ich dachte Vis2 ist schon Final

myssv

@timowald sagte in Navigartion in Vis2:

Nutze ViewBar

Ich möchte auch gerade mit VIS2 starten und suche ebenfalls eine gute Navigation für den Anfang. Wo kann ich denn ViewBar finden?

Homoran

@ostseereiter sagte in Vis2 ab morgen im stable:

Was kann ich tun?

nach etwas Bedenkzeit habe ich deinen Beitrag mal in den Sammelthread verschoben

@mcm57

@djmarc75 sagte in Vis2 ab morgen im stable:

im entsprechenden Beta-Adapter-Beitrag zum Vis2-Adapter

enäää

@ostseereiter sagte in Vis2 ab morgen im stable:

@djmarc75
ich dachte Vis2 ist schon Final

ja!

DJMarc75

@homoran sagte in Vis2 ab morgen im stable:

ja!

ok, bin etwas retro anscheinend :face_with_thermometer:

Santos

Abend,
ich kann die VIS-2 nicht installieren, es kommt zum Fehler ERROR: Process exited with code 32, der WEB Adapter ist bereits installiert. Woran liegt das?
Danke im Voraus

Thomas Braun

@santos

Wie installierst du es denn? Welche Meldungen kommen genau?

Santos

@thomas-braun Ich installiere es direkt als Adapter, oder was meinst du?
Es werden zuerst alle Objekte runtergeladen und nacheinander installiert, dauert ziemlich lange. Am Ende kommt aber dann die Zeile mit dem Fehlercode 32. Liegt es vielleicht daran, dass ich meine ganze iobroker Instanz (js, npm) seit einem Jahr nicht geupdatet habe? Eigentlich handele ich immer nach dem Prinzip never touching a running system.

Thomas Braun

@santos

Ja, das ist ganz sicher der Grund...

iob diag

sagt zu der Kiste?

Homoran

@santos sagte in Vis2 ab morgen im stable:

Eigentlich handele ich immer nach dem Prinzip never touching a running system.

und diese Einstellung führt jetzt zu deinem Problem, bis hin zu einer nie mehr fixbaren Installation.

Santos

pi@raspberrypi:~ $ iob diag
iobroker [command]

Commands:
 iobroker setup                                               Setup ioBroker
 iobroker start [all|<adapter>.<instance>]                    Starts the js-controller or a specified adapter instance
 iobroker stop [<adapter>.<instance>]                         stops the js-controller or a specified adapter instance
 iobroker restart [<adapter>.<instance>]                      Restarts js-controller or a specified adapter instance  [aliases: r]
 iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
 iobroker info                                                Shows the host info
 iobroker logs [<adapter>]                                    Monitor log
 iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
 iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
 iobroker rebuild [<module>]                                  Rebuild all native modules or path
 iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
 iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
 iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
 iobroker update [<repositoryUrl>]                            Update repository and list adapters
 iobroker upgrade                                             Upgrade management
 iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
 iobroker object                                              Object management  [aliases: o]
 iobroker state                                               State management  [aliases: s]
 iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
 iobroker list <type> [<filter>]                              List all entries, like objects
 iobroker chmod <mode> <file>                                 Change file rights
 iobroker chown <user> <group> <file>                         Change file ownership
 iobroker touch <file>                                        Touch file
 iobroker rm <file>                                           Remove file
 iobroker file                                                File management
 iobroker user                                                User commands
 iobroker group                                               group management
 iobroker host <hostname>                                     Set host to given hostname
 iobroker set <adapter>.<instance>                            Change settings of adapter config
 iobroker license <license.file or license.text>              Update license by given file
 iobroker cert                                                Certificate management
 iobroker clean <yes>                                         Clears all objects and states
 iobroker backup                                              Create backup
 iobroker restore <backup name or path>                       Restore a specified backup
 iobroker validate <backup name or path>                      Validate a specified backup
 iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
 iobroker repo [<name>]                                       Show repo information
 iobroker uuid                                                Show uuid of the installation  [aliases: id]
 iobroker unsetup                                             Reset license, installation secret and language
 iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
 iobroker multihost                                           Multihost management
 iobroker compact                                             compact group management
 iobroker plugin                                              Plugin management
 iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
 --help  Show help  [boolean]

MOD-EDIT: Code in code-tags gesetzt!

Thomas Braun

@santos

Dann fangen wir ganz unten an...

iob stop
iob fix
iob start

Und dann nochmal

iob diag

Homoran

@santos ja, so alt, dass es die Befehle nicht kennt.
Das gibt jetzt Arbeit

Santos

Ich sehe, wie alt die ganze Kiste ist...

======================= SUMMARY =======================
                       v.2023-10-10


  Static hostname: raspberrypi
        Icon name: computer
 Operating System: Raspbian GNU/Linux 10 (buster)
           Kernel: Linux 5.10.103-v7l+
     Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               armhf
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:
Pending iob updates:    5

Nodejs-Installation:    /usr/bin/nodejs         v17.6.0
                       /usr/bin/node           v17.6.0
                       /usr/bin/npm            8.5.1
                       /usr/bin/npx            8.5.1
                       /usr/bin/corepack       0.10.0

Recommended versions are nodejs  and npm
Your nodejs installation is correct

MEMORY:
             total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        4.7G        395M        2.1G        6.3G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        4.8G

Active iob-Instances:   19
Active repo(s): stable

ioBroker Core:          js-controller           4.0.18
                       admin                   6.12.0

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                7577
States:                 9682

Size of iob-Database:

12M     /opt/iobroker/iobroker-data/objects.jsonl
8.5M    /opt/iobroker/iobroker-data/objects.json.migrated
8.4M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
3.4M    /opt/iobroker/iobroker-data/states.jsonl
2.1M    /opt/iobroker/iobroker-data/states.json.migrated
2.1M    /opt/iobroker/iobroker-data/states.json.bak.migrated



=================== END OF SUMMARY ====================

Homoran

@santos bitte die Langfassung

Santos

@homoran sagte in Vis2 ab morgen im stable:

@santos bitte die Langfassung

Es läuft. Vermutlich schickt ihr mich gleich die nodejs, npm und js-controller zu updaten :astonished:

Thomas Braun

@santos sagte in Vis2 ab morgen im stable:

Raspbian GNU/Linux 10 (buster)

Ist tot.
Installier da NEU! ein Raspberry OS 12 in der 64Bit-Lite-Version.

iob nodejs-update

bringt die Basis auf Stand.
Dann die 5 iob-Adapter aktualisieren, als letztes den js-controller:

iob update
iob upgrade all
iob stop
iob upgrade self
iob start

Und dann sollte auch vis-2 installierbar sein.
Davon dann ein Backup erstellen und zeitnah auf ein frisches System umziehen.

Santos

@santos sagte in Vis2 ab morgen im stable:

@homoran sagte in Vis2 ab morgen im stable:

@santos bitte die Langfassung

Es läuft. Vermutlich schickt ihr mich gleich die nodejs, npm und js-controller zu updaten :astonished:

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 21:35:31 up 46 days, 59 min,  2 users,  load average: 0.96, 1.29, 1.37
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Fri 2024-02-02 21:35:31 CET
           Universal time: Fri 2024-02-02 20:35:31 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        4.6G        395M        2.1G        6.3G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        4.7G

         7898 M total memory
         1207 M used memory
          869 M active memory
         2182 M inactive memory
         4617 M free memory
          233 M buffer memory
         1839 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  8.1G   48G  15% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  396M  3.5G  11% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Dec 18 20:35:49 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:E2:25:2C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=848b4126-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Mon Dec 18 20:35:50 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Mon Dec 18 20:35:50 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Mon Dec 18 20:35:52 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
515M    /var/
193M    /var/cache
181M    /var/cache/apt
125M    /var/lib
122M    /var/cache/apt/archives

Archived and active journals take up 394.7M in the file system.

/opt/iobroker/backups:
17M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
540M    /opt/iobroker/iobroker-data/files
385M    /opt/iobroker/iobroker-data/history
138M    /opt/iobroker/iobroker-data/files/vis-2
124M    /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
22M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map
19M     /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.02fc3820.js.map
18M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.e642d05b.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v17.6.0
/usr/bin/node           v17.6.0
/usr/bin/npm            8.5.1
/usr/bin/npx            8.5.1
/usr/bin/corepack       0.10.0


nodejs:
  Installed: 17.6.0-deb-1nodesource1
  Candidate: 17.6.0-deb-1nodesource1
  Version table:
 *** 17.6.0-deb-1nodesource1 100
        100 /var/lib/dpkg/status
     14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.18
admin:          6.12.0
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.fronius.0                : fronius               : raspberrypi                              -  enabled
  system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.jarvis.0                 : jarvis                : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.mihome.0                 : mihome                : raspberrypi                              -  enabled, port: 9898, bind: 192.168.1.32
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.pushover.0               : pushover              : raspberrypi                              -  enabled
  system.adapter.pvforecast.0             : pvforecast            : raspberrypi                              - disabled
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mihome.0                 : mihome                : raspberrypi                              -  enabled, port: 9898, bind: 192.168.1.32
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.15  , installed 6.12.0 [Updatable]
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "backitup"     : 2.9.8    , installed 2.8.7  [Updatable]
Adapter    "daswetter"    : 3.1.13   , installed 3.1.13
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "fronius"      : 2.0.2    , installed 2.0.2
Adapter    "fronius-solarweb": 0.0.3 , installed 0.0.3
Adapter    "fullybrowser" : 3.0.9    , installed 2.1.2  [Updatable]
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 4.0.18 [Updatable]
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "modbus"       : 6.1.0    , installed 6.1.0
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.1
Adapter    "reolink"      : 1.0.3    , installed 1.0.3
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "schoolfree"   : 1.1.3    , installed 1.1.3
Adapter    "shuttercontrol": 1.6.3   , installed 1.6.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "telegram"     : 3.0.1    , installed 3.0.1
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-2"        : 2.9.11   , installed 2.9.11
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 2.1.0    , installed 2.1.0
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "web"          : 6.2.3    , installed 6.2.3
Adapter    "webuntis"     : 0.3.4    , installed 0.3.4
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.5.10   , installed 2.5.10
Adapter    "zigbee"       : 1.10.1   , installed 1.8.24 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        7577
States:         9681

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 https://deb.nodesource.com/node_14.x buster InRelease [4584 B]
Get:4 https://pkgs.tailscale.com/stable/raspbian buster InRelease
Fetched 11.1 kB in 6s (1945 B/s)
Reading package lists...
E: Broken packages
Pending Updates:

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       54870218   6832/io.jarvis.0
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      0          16284      522/dnsmasq
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          16312      537/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          53797492   9084/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       54865841   6654/io.sonoff.0
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       54868268   6606/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       54863717   6217/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       54863710   6217/iobroker.js-co
tcp        0      0 0.0.0.0:5900            0.0.0.0:*               LISTEN      0          16961      510/vncserver-x11-c
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       54862302   6237/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       54866932   6824/io.web.0
tcp6       0      0 :::53                   :::*                    LISTEN      0          16286      522/dnsmasq
tcp6       0      0 :::22                   :::*                    LISTEN      0          16314      537/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          53797491   9084/cupsd
tcp6       0      0 :::5900                 :::*                    LISTEN      0          16960      510/vncserver-x11-c
udp        0      0 0.0.0.0:59828           0.0.0.0:*                           108        15850      403/avahi-daemon: r
udp        0      0 0.0.0.0:53              0.0.0.0:*                           0          16283      522/dnsmasq
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          18815      457/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          53796127   9086/cups-browsed
udp        0      0 0.0.0.0:41641           0.0.0.0:*                           0          30663282   639/tailscaled
udp        0      0 0.0.0.0:9898            0.0.0.0:*                           1001       54867124   6527/io.mihome.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        15848      403/avahi-daemon: r
udp6       0      0 :::40928                :::*                                108        15851      403/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          21396      457/dhcpcd
udp6       0      0 :::53                   :::*                                0          16285      522/dnsmasq
udp6       0      0 :::41641                :::*                                0          30663281   639/tailscaled
udp6       0      0 :::5353                 :::*                                108        15849      403/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-02-02 21:29:02.192  - info: sonoff.0 (6654) Client [Sonoff-Rollo-K1] connected with secret 1706905742191_7543
2024-02-02 21:29:02.202  - info: sonoff.0 (6654) Client [Sonoff-Rollo-K2] connected with secret 1706905742201_9385
2024-02-02 21:29:02.468  - info: sonoff.0 (6654) Client [Sonoff-Gastherme] connected with secret 1706905742467_1880
2024-02-02 21:29:02.708  - info: sonoff.0 (6654) Client [Sonoff-Touch-Lara] connected with secret 1706905742707_7343
2024-02-02 21:29:02.716  - info: sonoff.0 (6654) Client [Sonoff-Heizung-PV] connected with secret 1706905742710_9766
2024-02-02 21:29:43.287  - info: alexa2.0 (6404) Unknown Device, but enabling commands, Try it and report back if commands work.
2024-02-02 21:29:43.288  - info: alexa2.0 (6404) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted
2024-02-02 21:29:43.288  - info: alexa2.0 (6404)     Device-type:A1CFVS523BQYZ7 - Oleg's Mi Watch (Mi Watch) (SLEEP,SUPPORTS_LOCALE_SWITCH,TIMERS_AND_ALARMS,DEEZER,VOLUME_SETTING,KINDLE_BOOKS,SET_LOCALE,AMAZON_MUSIC,SIRIUSXM,REMINDERS,DEREGISTER_DEVICE,CHANGE_NAME,AUDIBLE,I_HEART_RADIO,SUPPORTS_LOCALE,ADAPTIVE_LISTENING,TIDAL,ASCENDING_ALARM_VOLUME,DIALOG_INTERFACE_VERSION,PERSISTENT_CONNECTION,MICROPHONE,SPEECH_RECOGNIZER_USS,SOUND_SETTINGS,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,CUSTOM_ALARM_TONE,TOUCH_INITIATED,DREAM_TRAINING,TIMERS_ALARMS_NOTIFICATIONS_VOLUME,TUNE_IN,MUSIC_SKILL,MULTI_WAKEWORDS_SUPPORTED,GOLDFISH,SET_TIME_ZONE,APPLE_MUSIC,EARCONS,AUDIO_PLAYER)
2024-02-02 21:29:57.566  - info: alexa2.0 (6404) Using cached smart home devices list from Fri Feb 02 2024 21:12:52 GMT+0100 (Mitteleuropäische Normalzeit)
2024-02-02 21:29:59.018  - info: alexa2.0 (6404) No smart home devices to query
2024-02-02 21:29:59.918  - info: alexa2.0 (6404) Subscribing to states...
2024-02-02 21:29:59.931  - info: alexa2.0 (6404) Deleting the following states: ["Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876","Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876.#enabled","Smart-Home-Devices.54d4a433-7a90-481c-b72b-57b2afa41876.#delete"]
2024-02-02 21:30:00.188  - info: host.raspberrypi instance system.adapter.daswetter.0 started with pid 8110
2024-02-02 21:30:02.476  - info: alexa2.0 (6404) Alexa-Push-Connection (macDms = true) established. Disable Polling
2024-02-02 21:30:02.641  - info: daswetter.0 (8110) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2024-02-02 21:30:02.853  - info: daswetter.0 (8110) starting. Version 3.1.13 in /opt/iobroker/node_modules/iobroker.daswetter, node: v17.6.0, js-controller: 4.0.18
2024-02-02 21:30:11.044  - info: daswetter.0 (8110) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2024-02-02 21:30:11.565  - info: daswetter.0 (8110) cleaned everything up...
2024-02-02 21:30:11.597  - info: host.raspberrypi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-02-02 21:30:18.813  - info: alexa2.0 (6404) Initialization Done ...
2024-02-02 21:32:48.987  - info: admin.0 (6237) <== Disconnect system.user.admin from ::ffff:192.168.1.64
2024-02-02 21:34:46.737  - info: admin.0 (6237) <== Disconnect system.user.admin from ::ffff:192.168.1.64 admin
2024-02-02 21:34:48.077  - info: jarvis.0 (6832) Client with IP 192.168.1.64 connected.
2024-02-02 21:34:51.027  - info: jarvis.0 (6832) Client with IP 192.168.1.64 disconnected.
2024-02-02 21:34:54.795  - info: admin.0 (6237) ==> Connected system.user.admin from ::ffff:192.168.1.64

============ Mark until here for C&P =============

Thomas Braun

@santos sagte in Vis2 ab morgen im stable:

Vermutlich schickt ihr mich gleich die nodejs, npm und js-controller zu updaten

Selbstverständlich.

Community Forum

NEWS

Vis2 ab 09.01.2024 im stable

Support us

877

32.4k

81.5k

1.3m