NEWS
IObroker startet jeden Abend neu!
-
Update nach deinen Kommandos durchgeschossen, bin mal gespannt wie er sich heute verhält.
ich geb mal Rückmeldung.Soll ich zusätzlich nochmal den Fixer drüber schicken?
So, nach anderthalb Tagen Testlauf kann ich nun sagen, is noch schlimmer wie vorher.
Vorher startete nur IO neu, jetzt bleibt der ganze Raspi hängen und muss über Hard-Reset neu gestartet werden. :-(
Und das sogar gestern 2x am Tag.Man muss doch irgendwie herausfinden können, woran das liegt :-( kann man nicht irgendwo gespeicherte Logs ziehen oder so??
In der iob diag schreibt er auch irgendwas von "Error in NPM tree"======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 19:11:38 up 5 min, 2 users, load average: 0.35, 0.68, 0.39 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-01-24 19:11:38 CET Universal time: Wed 2024-01-24 18:11:38 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.3G 347M 1.2M 334M 607M Swap: 104M 0B 104M Total: 2.0G 1.3G 452M 1848 M total memory 1268 M used memory 1282 M active memory 123 M inactive memory 330 M free memory 24 M buffer memory 294 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 661M 0 661M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 611M /var/log 609M /var/log/journal/646f283dbad041b98afadc09481d9d55 609M /var/log/journal 203M /var/cache Archived and active journals take up 608.8M in the file system. /opt/iobroker/backups: 28M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 343M /opt/iobroker/iobroker-data/ 224M /opt/iobroker/iobroker-data/files 76M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspi - enabled system.adapter.backitup.0 : backitup : raspi - disabled + system.adapter.evohome.0 : evohome : raspi - enabled system.adapter.flot.0 : flot : raspi - disabled + system.adapter.growatt.0 : growatt : raspi - enabled + system.adapter.history.0 : history : raspi - enabled + system.adapter.hs100.0 : hs100 : raspi - enabled system.adapter.ical.0 : ical : raspi - enabled system.adapter.ical.1 : ical : raspi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspi - disabled + system.adapter.info.0 : info : raspi - enabled + system.adapter.iot.0 : iot : raspi - enabled + system.adapter.javascript.0 : javascript : raspi - enabled + system.adapter.lgtv.0 : lgtv : raspi - enabled system.adapter.mobile.0 : mobile : raspi - disabled + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 system.adapter.openweathermap.0 : openweathermap : raspi - enabled + system.adapter.ring.0 : ring : raspi - enabled + system.adapter.rpi2.0 : rpi2 : raspi - enabled system.adapter.socketio.0 : socketio : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.1 : tr-064 : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - disabled system.adapter.vis.0 : vis : raspi - enabled system.adapter.wallpanel.0 : wallpanel : raspi - disabled + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.web.1 : web : raspi - disabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspi - enabled system.adapter.ws.0 : ws : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 ioBroker-Repositories beta : http://download.iobroker.net/sources-dist-latest.json stabil : http://download.iobroker.net/sources-dist.json Active repo(s): stabil Installed ioBroker-Instances Used repository: stabil Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "growatt" : 3.2.1 , installed 3.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hs100" : 2.2.0 , installed 2.2.0 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "lgtv" : 2.1.2 , installed 2.1.2 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "wallpanel" : 0.3.11 , installed 0.3.11 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Objects and States Please stand by - This may take a while Objects: 6085 States: 16953 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Reading package lists... Pending Updates: 7 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.60:1884 0.0.0.0:* LISTEN 1001 16654 906/io.mqtt.0 tcp 0 0 192.168.178.60:1885 0.0.0.0:* LISTEN 1001 16655 906/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 12210 996/io.sonoff.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16465 696/iobroker.js-con tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 106 13880 613/redis-server 12 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13837 652/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 21580 1701/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12017 785/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 13839 652/sshd: /usr/sbin tcp6 0 0 ::1:6379 :::* LISTEN 106 13881 613/redis-server 12 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13770 453/avahi-daemon: r udp 0 0 0.0.0.0:36397 0.0.0.0:* 104 13772 453/avahi-daemon: r udp6 0 0 :::60534 :::* 104 13773 453/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13771 453/avahi-daemon: r udp6 0 0 fe80::c189:98ca:96e:546 :::* 0 13959 539/NetworkManager *** Log File - Last 25 Lines *** 2024-01-24 19:07:31.532 - info: info.0 (1087) cpu Temp res = {"main":53.069,"cores":[],"max":53.069,"socket":[],"chipset":null} 2024-01-24 19:07:31.933 - info: info.0 (1087) State value to set for "info.0.sysinfo.memory.memLayout.ram0.clockSpeed" has to be type "string" but received type "number" 2024-01-24 19:07:32.682 - info: host.raspi instance system.adapter.lgtv.0 started with pid 1233 2024-01-24 19:07:32.998 - info: iot.0 (1110) starting. Version 2.0.11 in /opt/iobroker/node_modules/iobroker.iot, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:33.292 - info: iot.0 (1110) Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com 2024-01-24 19:07:34.478 - info: iot.0 (1110) Connection changed: connect "info_mediaevent24_de" 2024-01-24 19:07:36.233 - info: info.0 (1087) State value to set for "info.0.sysinfo.disks.diskLayout.dev0.size" has to be type "string" but received type "number" 2024-01-24 19:07:36.507 - info: lgtv.0 (1233) starting. Version 2.1.2 in /opt/iobroker/node_modules/iobroker.lgtv, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:36.685 - info: host.raspi instance system.adapter.ring.0 started with pid 1508 2024-01-24 19:07:36.746 - info: lgtv.0 (1233) Ready. Configured WebOS TV IP: 192.168.178.56 2024-01-24 19:07:43.082 - info: vis.0 (1686) starting. Version 1.5.4 in /opt/iobroker/node_modules/iobroker.vis, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:44.691 - info: host.raspi instance system.adapter.web.0 started with pid 1701 2024-01-24 19:07:44.805 - info: vis.0 (1686) Terminated (NO_ERROR): Without reason 2024-01-24 19:07:45.471 - info: host.raspi instance system.adapter.vis.0 terminated while should be started once 2024-01-24 19:07:45.698 - info: ring.0 (1508) starting. Version 5.0.10 (non-npm: iobroker-community-adapters/ioBroker.ring) in /opt/iobroker/node_modules/iobroker.ring, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:45.763 - info: ring.0 (1508) Initializing Api Client 2024-01-24 19:07:46.476 - info: ring.0 (1508) Received new Refresh Token. Will use the new one until the token in config gets changed 2024-01-24 19:07:48.002 - info: ring.0 (1508) Get sunset and sunrise 2024-01-24 19:07:48.070 - info: ring.0 (1508) Daily sun parameter calculation scheduled for 00:00:37 2024-01-24 19:07:54.417 - warn: sonoff.0 (996) Client "" not connected 2024-01-24 19:07:54.517 - warn: sonoff.0 (996) Client "" not connected 2024-01-24 19:08:10.184 - info: alexa2.0 (932) Subscribing to states... 2024-01-24 19:08:10.191 - info: alexa2.0 (932) Deleting the following states: ["Smart-Home-Devices.deleteAll","Smart-Home-Devices.discoverDevices"] 2024-01-24 19:08:12.068 - info: alexa2.0 (932) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-01-24 19:08:25.834 - info: alexa2.0 (932) Initialization Done ... ============ Mark until here for C&P =============Im Summary, das danach automatisch erstellt wird sind auch rote Errors bei NPM:
======================= SUMMARY ======================= v.2023-10-10 Kernel : aarch64 Userland : arm64 Systemuptime and Load: 19:11:38 up 5 min, 2 users, load average: 0.35, 0.68, 0.39 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-01-24 19:11:38 CET Universal time: Wed 2024-01-24 18:11:38 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.3G 347M 1.2M 334M 607M Swap: 104M 0B 104M Total: 2.0G 1.3G 452M 1848 M total memory 1268 M used memory 1282 M active memory 123 M inactive memory 330 M free memory 24 M buffer memory 294 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 661M 0 661M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 611M /var/log 609M /var/log/journal/646f283dbad041b98afadc09481d9d55 609M /var/log/journal 203M /var/cache Archived and active journals take up 608.8M in the file system. /opt/iobroker/backups: 28M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 343M /opt/iobroker/iobroker-data/ 224M /opt/iobroker/iobroker-data/files 76M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/stat Static hostname: raspi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 7 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 1.9G 1.4G 165M 1.2M 436M 529M Swap: 104M 0B 104M Total: 2.0G 1.4G 270M Active iob-Instances: 19 Active repo(s): stabil ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: redis Status admin and web instance: + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.web.1 : web : raspi - disabled, port: 20002, bind: 0.0.0.0, run as: admin Objects: 6085 States: 16953 Size of iob-Database: 42M /opt/iobroker/iobroker-data/objects.jsonl 68K /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying === pi@raspi:~ $ ======== Start marking the full check here ========= -bash: ========: command not found pi@raspi:~ $ pi@raspi:~ $ ``` > Skript v.2023-10-10 > > *** BASE SYSTEM *** > Static hostname: raspi > Icon name: computer > Operating System: Debian GNU/Linux 12 (bookworm) > Kernel: Linux 6.1.0-rpi7-rpi-v8 > Architecture: arm64 > > Model : Raspberry Pi 4 Model B Rev 1.1 > Docker : false > Virtualization : none > Kernel : aarch64 > Userland : arm64 > > Systemuptime and Load: > 19:11:38 up 5 min, 2 users, load average: 0.35, 0.68, 0.39 > CPU threads: 4 > > > *** RASPBERRY THROTTLING *** > Current issues: > No throttling issues detected. > > Previously detected issues: > No throttling issues detected. > > *** Time and Time Zones *** > Local time: Wed 2024-01-24 19:11:38 CET > Universal time: Wed 2024-01-24 18:11:38 UTC > RTC time: n/a > Time zone: Europe/Berlin (CET, +0100) > System clock synchronized: yes > NTP service: active > RTC in local TZ: no > > *** User and Groups *** > pi > /home/pi > pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker > > *** X-Server-Setup *** > X-Server: false > Desktop: > Terminal: tty > Boot Target: multi-user.target > > *** MEMORY *** > total used free shared buff/cache available > Mem: 1.9G 1.3G 347M 1.2M 334M 607M > Swap: 104M 0B 104M > Total: 2.0G 1.3G 452M > > 1848 M total memory > 1268 M used memory > 1282 M active memory > 123 M inactive memory > 330 M free memory > 24 M buffer memory > 294 M swap cache > 99 M total swap > 0 M used swap > 99 M free swap > > Raspberry only: > oom events: 0 > lifetime oom required: 0 Mbytes > total time in oom handler: 0 ms > max time spent in oom handler: 0 ms > > > *** FAILED SERVICES *** > > UNIT LOAD ACTIVE SUB DESCRIPTION > 0 loaded units listed. > > *** FILESYSTEM *** > Filesystem Type Size Used Avail Use% Mounted on > udev devtmpfs 661M 0 661M 0% /dev > tmpfs tmpfs 185M 1.2M 184M 1% /run > /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / > tmpfs tmpfs 925M 0 925M 0% /dev/shm > tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock > /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware > tmpfs tmpfs 185M 0 185M 0% /run/user/1000 > > Messages concerning ext4 filesystem in dmesg: > [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait > [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. > [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. > > Show mounted filesystems \(real ones only\): > TARGET SOURCE FSTYPE OPTIONS > / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 > `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro -bash: Skript: command not found -bash: Abfall2024.ics: command not found -bash: Static: command not found -bash: Icon: command not found -bash: command substitution: line 7: syntax error near unexpected token `(' -bash: command substitution: line 7: `Operating System: Debian GNU/Linux 12 (bookworm)' -bash: -/boot/firmware: No such file or directory pi@raspi:~ $ pi@raspi:~ $ Files in neuralgic directories: -bash: Files: command not found pi@raspi:~ $ pi@raspi:~ $ /var: -bash: /var:: No such file or directory pi@raspi:~ $ 1.1G /var/ -bash: 1.1G: command not found pi@raspi:~ $ 611M /var/log -bash: 611M: command not found pi@raspi:~ $ 609M /var/log/journal/646f283dbad041b98afadc09481d9d55 -bash: 609M: command not found pi@raspi:~ $ 609M /var/log/journal -bash: 609M: command not found pi@raspi:~ $ 203M /var/cache -bash: 203M: command not found pi@raspi:~ $ pi@raspi:~ $ Archived and active journals take up 608.8M in the file system. -bash: Archived: command not found pi@raspi:~ $ pi@raspi:~ $ /opt/iobroker/backups: -bash: /opt/iobroker/backups:: No such file or directory pi@raspi:~ $ 28M /opt/iobroker/backups/ -bash: 28M: command not found pi@raspi:~ $ pi@raspi:~ $ /opt/iobroker/iobroker-data: -bash: /opt/iobroker/iobroker-data:: No such file or directory pi@raspi:~ $ 343M /opt/iobroker/iobroker-data/ -bash: 343M: command not found pi@raspi:~ $ 224M /opt/iobroker/iobroker-data/files -bash: 224M: command not found pi@raspi:~ $ 76M /opt/iobroker/iobroker-data/backup-objects -bash: 76M: command not found pi@raspi:~ $ 67M /opt/iobroker/iobroker-data/files/javascript.admin -bash: 67M: command not found pi@raspi:~ $ 48M /opt/iobroker/iobroker-data/files/javascript.admin/static -bash: 48M: command not found pi@raspi:~ $ pi@raspi:~ $ The five largest files in iobroker-data are: -bash: The: command not found pi@raspi:~ $ 42M /opt/iobroker/iobroker-data/objects.jsonl -bash: 42M: command not found pi@raspi:~ $ 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map -bash: 33M: command not found pi@raspi:~ $ 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map -bash: 21M: command not found pi@raspi:~ $ 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js -bash: 8.5M: command not found pi@raspi:~ $ 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js -bash: 8.3M: command not found pi@raspi:~ $ pi@raspi:~ $ USB-Devices by-id: -bash: USB-Devices: command not found pi@raspi:~ $ USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': -bash: USB-Sticks: command not found pi@raspi:~ $ pi@raspi:~ $ /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 -bash: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00: Permission denied pi@raspi:~ $ pi@raspi:~ $ *** NodeJS-Installation *** -bash: Abfall2024.ics: command not found pi@raspi:~ $ pi@raspi:~ $ /usr/bin/nodejs v18.19.0 node:internal/modules/cjs/loader:1137 throw err; ^ Error: Cannot find module '/home/pi/v18.19.0' at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15) at Module._load (node:internal/modules/cjs/loader:975:27) at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) at node:internal/main/run_main_module:28:49 { code: 'MODULE_NOT_FOUND', requireStack: [] } Node.js v18.19.0 pi@raspi:~ $ /usr/bin/node v18.19.0 node:internal/modules/cjs/loader:1137 throw err; ^ Error: Cannot find module '/home/pi/v18.19.0' at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15) at Module._load (node:internal/modules/cjs/loader:975:27) at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) at node:internal/main/run_main_module:28:49 { code: 'MODULE_NOT_FOUND', requireStack: [] } Node.js v18.19.0 pi@raspi:~ $ /usr/bin/npm 10.2.3 Unknown command: "10.2.3" To see a list of supported npm commands, run: npm help pi@raspi:~ $ /usr/bin/npx 10.2.3 npm ERR! code E404 npm ERR! 404 Not Found - GET https://registry.npmjs.org/10.2.3 - Not found npm ERR! 404 npm ERR! 404 '10.2.3@*' is not in this registry. npm ERR! 404 npm ERR! 404 Note that you can also install from a npm ERR! 404 tarball, folder, http url, or git url. npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-01-24T18_14_59_263Z-debug-0.log pi@raspi:~ $ /usr/bin/corepack 0.22.0 Unknown Syntax Error: Command not found; did you mean one of: 0. corepack -h 1. corepack -v 2. corepack disable [--install-directory #0] ... 3. corepack enable [--install-directory #0] ... 4. corepack install <-g,--global> [--all] [--cache-only] ... 5. corepack install 6. corepack pack [--all] [--json] [-o,--output #0] ... 7. corepack up 8. corepack use <pattern> 9. corepack hydrate [--activate] <fileName> 10. corepack prepare [--activate] [--all] [--json] [-o,--output] ... While running 0.22.0 pi@raspi:~ $ pi@raspi:~ $ pi@raspi:~ $ nodejs: -bash: nodejs:: command not found pi@raspi:~ $ Installed: 18.19.0-1nodesource1 -bash: Installed:: command not found pi@raspi:~ $ Candidate: 18.19.0-1nodesource1 -bash: Candidate:: command not found pi@raspi:~ $ Version table: -bash: Version: command not found pi@raspi:~ $ 18.19.0+dfsg-6~deb12u1 500 -bash: 18.19.0+dfsg-6~deb12u1: command not found pi@raspi:~ $ 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ *** 18.19.0-1nodesource1 1001 -bash: Abfall2024.ics: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 100 /var/lib/dpkg/status -bash: 100: command not found pi@raspi:~ $ 18.18.2-1nodesource1 1001 -bash: 18.18.2-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.18.1-1nodesource1 1001 -bash: 18.18.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.18.0-1nodesource1 1001 -bash: 18.18.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.17.1-1nodesource1 1001 -bash: 18.17.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.17.0-1nodesource1 1001 -bash: 18.17.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages : raspi - disabled + system.adapter.i-bash: 500: command not found pi@raspi:~ $ 18.16.1-1nodesource1 1001 -bash: 18.16.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.16.0-1nodesource1 1001 -bash: 18.16.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.15.0-1nodesource1 1001 -bash: 18.15.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.14.2-1nodesource1 1001 -bash: 18.14.2-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.14.1-1nodesource1 1001 -bash: 18.14.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.14.0-1nodesource1 1001 -bash: 18.14.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.13.0+dfsg1-1 500 -bash: 18.13.0+dfsg1-1: command not found pi@raspi:~ $ 500 http://deb.debian.org/debian bookworm/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.13.0-1nodesource1 1001 -bash: 18.13.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.12.0-1nodesource1 1001 -bash: 18.12.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.11.0-1nodesource1 1001 -bash: 18.11.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.10.0-1nodesource1 1001 -bash: 18.10.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.9.1-1nodesource1 1001 -bash: 18.9.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.9.0-1nodesource1 1001 -bash: 18.9.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.8.0-1nodesource1 1001 -bash: 18.8.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.7.0-1nodesource1 1001 -bash: 18.7.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.6.0-1nodesource1 1001 -bash: 18.6.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.5.0-1nodesource1 1001 -bash: 18.5.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.4.0-1nodesource1 1001 -bash: 18.4.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.3.0-1nodesource1 1001 -bash: 18.3.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.2.0-1nodesource1 1001 -bash: 18.2.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.1.0-1nodesource1 1001 -bash: 18.1.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.0.0-1nodesource1 1001 -bash: 18.0.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ pi@raspi:~ $ Temp directories causing npm8 problem: 0 -bash: Temp: command not found pi@raspi:~ $ No problems detected -bash: No: command not found pi@raspi:~ $ pi@raspi:~ $ Errors in npm tree: -bash: Errors: command not found pi@raspi:~ $ pi@raspi:~ $ *** ioBroker-Installation *** -bash: Abfall2024.ics: command not found pi@raspi:~ $ pi@raspi:~ $ ioBroker Status -bash: ioBroker: command not found pi@raspi:~ $ iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspi - enabled system.adapter.backitup.0 : backitup : raspi - disabled + system.adapter.evohome.0 : evohome : raspi - enabled system.adapter.flot.0 : flot : raspi - disabled + system.adapter.growatt.0 : growatt : raspi - enabled + system.adapter.history.0 : history : raspi - enabled + system.adapter.hs100.0 : hs100 : raspi - enabled system.adapter.ical.0 : ical : raspi - enabled system.adapter.ical.1 : ical : raspi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspi - disabled + system.adapter.info.0 : info : raspi - enabled + system.adapter.iot.0 : iot : raspi - enabled + system.adapter.javascript.0 : javascript : raspi - enabled + system.adapter.lgtv.0 : lgtv : raspi - enabled system.adapter.mobile.0 : mobile : raspi - disabled + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 system.adapter.openweathermap.0 : openweathermap : raspi - enabled + system.adapter.ring.0 : ring : raspi - enabled + system.adapter.rpi2.0 : rpi2 : raspi - enabled system.adapter.socketio.0 : socketio : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.1 : tr-064 : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - disabled system.adapter.vis.0 : vis : raspi - enabled system.adapter.wallpanel.0 : wallpanel : raspi - disabled + system.adapter.web.0 : web iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>|<adapter>] Starts the js-controller or a specified adapter instance or all instances of an adapter iobroker stop [<adapter>.<instance>|<adapter>] stops the js-controller or a specified adapter instance or all instances of an adapter iobroker restart [<adapter>.<instance>|<adapter>] Restarts js-controller or a specified adapter instance or all instances of an adapter [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker nodejs-update [<major-version>] Upgrade the Node.JS installation to the current LTS iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker vendor <passphrase> [<vendor.json>] Update the vendor information using given passphrase iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean] pi@raspi:~ $Blickt da einer genau durch??
-
So, nach anderthalb Tagen Testlauf kann ich nun sagen, is noch schlimmer wie vorher.
Vorher startete nur IO neu, jetzt bleibt der ganze Raspi hängen und muss über Hard-Reset neu gestartet werden. :-(
Und das sogar gestern 2x am Tag.Man muss doch irgendwie herausfinden können, woran das liegt :-( kann man nicht irgendwo gespeicherte Logs ziehen oder so??
In der iob diag schreibt er auch irgendwas von "Error in NPM tree"======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 19:11:38 up 5 min, 2 users, load average: 0.35, 0.68, 0.39 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-01-24 19:11:38 CET Universal time: Wed 2024-01-24 18:11:38 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.3G 347M 1.2M 334M 607M Swap: 104M 0B 104M Total: 2.0G 1.3G 452M 1848 M total memory 1268 M used memory 1282 M active memory 123 M inactive memory 330 M free memory 24 M buffer memory 294 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 661M 0 661M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 611M /var/log 609M /var/log/journal/646f283dbad041b98afadc09481d9d55 609M /var/log/journal 203M /var/cache Archived and active journals take up 608.8M in the file system. /opt/iobroker/backups: 28M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 343M /opt/iobroker/iobroker-data/ 224M /opt/iobroker/iobroker-data/files 76M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspi - enabled system.adapter.backitup.0 : backitup : raspi - disabled + system.adapter.evohome.0 : evohome : raspi - enabled system.adapter.flot.0 : flot : raspi - disabled + system.adapter.growatt.0 : growatt : raspi - enabled + system.adapter.history.0 : history : raspi - enabled + system.adapter.hs100.0 : hs100 : raspi - enabled system.adapter.ical.0 : ical : raspi - enabled system.adapter.ical.1 : ical : raspi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspi - disabled + system.adapter.info.0 : info : raspi - enabled + system.adapter.iot.0 : iot : raspi - enabled + system.adapter.javascript.0 : javascript : raspi - enabled + system.adapter.lgtv.0 : lgtv : raspi - enabled system.adapter.mobile.0 : mobile : raspi - disabled + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 system.adapter.openweathermap.0 : openweathermap : raspi - enabled + system.adapter.ring.0 : ring : raspi - enabled + system.adapter.rpi2.0 : rpi2 : raspi - enabled system.adapter.socketio.0 : socketio : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.1 : tr-064 : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - disabled system.adapter.vis.0 : vis : raspi - enabled system.adapter.wallpanel.0 : wallpanel : raspi - disabled + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.web.1 : web : raspi - disabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspi - enabled system.adapter.ws.0 : ws : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 ioBroker-Repositories beta : http://download.iobroker.net/sources-dist-latest.json stabil : http://download.iobroker.net/sources-dist.json Active repo(s): stabil Installed ioBroker-Instances Used repository: stabil Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "growatt" : 3.2.1 , installed 3.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hs100" : 2.2.0 , installed 2.2.0 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "lgtv" : 2.1.2 , installed 2.1.2 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "wallpanel" : 0.3.11 , installed 0.3.11 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Objects and States Please stand by - This may take a while Objects: 6085 States: 16953 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Reading package lists... Pending Updates: 7 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.60:1884 0.0.0.0:* LISTEN 1001 16654 906/io.mqtt.0 tcp 0 0 192.168.178.60:1885 0.0.0.0:* LISTEN 1001 16655 906/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 12210 996/io.sonoff.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16465 696/iobroker.js-con tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 106 13880 613/redis-server 12 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13837 652/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 21580 1701/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12017 785/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 13839 652/sshd: /usr/sbin tcp6 0 0 ::1:6379 :::* LISTEN 106 13881 613/redis-server 12 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13770 453/avahi-daemon: r udp 0 0 0.0.0.0:36397 0.0.0.0:* 104 13772 453/avahi-daemon: r udp6 0 0 :::60534 :::* 104 13773 453/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13771 453/avahi-daemon: r udp6 0 0 fe80::c189:98ca:96e:546 :::* 0 13959 539/NetworkManager *** Log File - Last 25 Lines *** 2024-01-24 19:07:31.532 - info: info.0 (1087) cpu Temp res = {"main":53.069,"cores":[],"max":53.069,"socket":[],"chipset":null} 2024-01-24 19:07:31.933 - info: info.0 (1087) State value to set for "info.0.sysinfo.memory.memLayout.ram0.clockSpeed" has to be type "string" but received type "number" 2024-01-24 19:07:32.682 - info: host.raspi instance system.adapter.lgtv.0 started with pid 1233 2024-01-24 19:07:32.998 - info: iot.0 (1110) starting. Version 2.0.11 in /opt/iobroker/node_modules/iobroker.iot, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:33.292 - info: iot.0 (1110) Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com 2024-01-24 19:07:34.478 - info: iot.0 (1110) Connection changed: connect "info_mediaevent24_de" 2024-01-24 19:07:36.233 - info: info.0 (1087) State value to set for "info.0.sysinfo.disks.diskLayout.dev0.size" has to be type "string" but received type "number" 2024-01-24 19:07:36.507 - info: lgtv.0 (1233) starting. Version 2.1.2 in /opt/iobroker/node_modules/iobroker.lgtv, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:36.685 - info: host.raspi instance system.adapter.ring.0 started with pid 1508 2024-01-24 19:07:36.746 - info: lgtv.0 (1233) Ready. Configured WebOS TV IP: 192.168.178.56 2024-01-24 19:07:43.082 - info: vis.0 (1686) starting. Version 1.5.4 in /opt/iobroker/node_modules/iobroker.vis, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:44.691 - info: host.raspi instance system.adapter.web.0 started with pid 1701 2024-01-24 19:07:44.805 - info: vis.0 (1686) Terminated (NO_ERROR): Without reason 2024-01-24 19:07:45.471 - info: host.raspi instance system.adapter.vis.0 terminated while should be started once 2024-01-24 19:07:45.698 - info: ring.0 (1508) starting. Version 5.0.10 (non-npm: iobroker-community-adapters/ioBroker.ring) in /opt/iobroker/node_modules/iobroker.ring, node: v18.19.0, js-controller: 5.0.17 2024-01-24 19:07:45.763 - info: ring.0 (1508) Initializing Api Client 2024-01-24 19:07:46.476 - info: ring.0 (1508) Received new Refresh Token. Will use the new one until the token in config gets changed 2024-01-24 19:07:48.002 - info: ring.0 (1508) Get sunset and sunrise 2024-01-24 19:07:48.070 - info: ring.0 (1508) Daily sun parameter calculation scheduled for 00:00:37 2024-01-24 19:07:54.417 - warn: sonoff.0 (996) Client "" not connected 2024-01-24 19:07:54.517 - warn: sonoff.0 (996) Client "" not connected 2024-01-24 19:08:10.184 - info: alexa2.0 (932) Subscribing to states... 2024-01-24 19:08:10.191 - info: alexa2.0 (932) Deleting the following states: ["Smart-Home-Devices.deleteAll","Smart-Home-Devices.discoverDevices"] 2024-01-24 19:08:12.068 - info: alexa2.0 (932) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-01-24 19:08:25.834 - info: alexa2.0 (932) Initialization Done ... ============ Mark until here for C&P =============Im Summary, das danach automatisch erstellt wird sind auch rote Errors bei NPM:
======================= SUMMARY ======================= v.2023-10-10 Kernel : aarch64 Userland : arm64 Systemuptime and Load: 19:11:38 up 5 min, 2 users, load average: 0.35, 0.68, 0.39 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-01-24 19:11:38 CET Universal time: Wed 2024-01-24 18:11:38 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.3G 347M 1.2M 334M 607M Swap: 104M 0B 104M Total: 2.0G 1.3G 452M 1848 M total memory 1268 M used memory 1282 M active memory 123 M inactive memory 330 M free memory 24 M buffer memory 294 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 661M 0 661M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 611M /var/log 609M /var/log/journal/646f283dbad041b98afadc09481d9d55 609M /var/log/journal 203M /var/cache Archived and active journals take up 608.8M in the file system. /opt/iobroker/backups: 28M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 343M /opt/iobroker/iobroker-data/ 224M /opt/iobroker/iobroker-data/files 76M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/stat Static hostname: raspi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 7 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 1.9G 1.4G 165M 1.2M 436M 529M Swap: 104M 0B 104M Total: 2.0G 1.4G 270M Active iob-Instances: 19 Active repo(s): stabil ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: redis Status admin and web instance: + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.web.1 : web : raspi - disabled, port: 20002, bind: 0.0.0.0, run as: admin Objects: 6085 States: 16953 Size of iob-Database: 42M /opt/iobroker/iobroker-data/objects.jsonl 68K /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying === pi@raspi:~ $ ======== Start marking the full check here ========= -bash: ========: command not found pi@raspi:~ $ pi@raspi:~ $ ``` > Skript v.2023-10-10 > > *** BASE SYSTEM *** > Static hostname: raspi > Icon name: computer > Operating System: Debian GNU/Linux 12 (bookworm) > Kernel: Linux 6.1.0-rpi7-rpi-v8 > Architecture: arm64 > > Model : Raspberry Pi 4 Model B Rev 1.1 > Docker : false > Virtualization : none > Kernel : aarch64 > Userland : arm64 > > Systemuptime and Load: > 19:11:38 up 5 min, 2 users, load average: 0.35, 0.68, 0.39 > CPU threads: 4 > > > *** RASPBERRY THROTTLING *** > Current issues: > No throttling issues detected. > > Previously detected issues: > No throttling issues detected. > > *** Time and Time Zones *** > Local time: Wed 2024-01-24 19:11:38 CET > Universal time: Wed 2024-01-24 18:11:38 UTC > RTC time: n/a > Time zone: Europe/Berlin (CET, +0100) > System clock synchronized: yes > NTP service: active > RTC in local TZ: no > > *** User and Groups *** > pi > /home/pi > pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker > > *** X-Server-Setup *** > X-Server: false > Desktop: > Terminal: tty > Boot Target: multi-user.target > > *** MEMORY *** > total used free shared buff/cache available > Mem: 1.9G 1.3G 347M 1.2M 334M 607M > Swap: 104M 0B 104M > Total: 2.0G 1.3G 452M > > 1848 M total memory > 1268 M used memory > 1282 M active memory > 123 M inactive memory > 330 M free memory > 24 M buffer memory > 294 M swap cache > 99 M total swap > 0 M used swap > 99 M free swap > > Raspberry only: > oom events: 0 > lifetime oom required: 0 Mbytes > total time in oom handler: 0 ms > max time spent in oom handler: 0 ms > > > *** FAILED SERVICES *** > > UNIT LOAD ACTIVE SUB DESCRIPTION > 0 loaded units listed. > > *** FILESYSTEM *** > Filesystem Type Size Used Avail Use% Mounted on > udev devtmpfs 661M 0 661M 0% /dev > tmpfs tmpfs 185M 1.2M 184M 1% /run > /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / > tmpfs tmpfs 925M 0 925M 0% /dev/shm > tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock > /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware > tmpfs tmpfs 185M 0 185M 0% /run/user/1000 > > Messages concerning ext4 filesystem in dmesg: > [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait > [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. > [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. > > Show mounted filesystems \(real ones only\): > TARGET SOURCE FSTYPE OPTIONS > / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 > `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro -bash: Skript: command not found -bash: Abfall2024.ics: command not found -bash: Static: command not found -bash: Icon: command not found -bash: command substitution: line 7: syntax error near unexpected token `(' -bash: command substitution: line 7: `Operating System: Debian GNU/Linux 12 (bookworm)' -bash: -/boot/firmware: No such file or directory pi@raspi:~ $ pi@raspi:~ $ Files in neuralgic directories: -bash: Files: command not found pi@raspi:~ $ pi@raspi:~ $ /var: -bash: /var:: No such file or directory pi@raspi:~ $ 1.1G /var/ -bash: 1.1G: command not found pi@raspi:~ $ 611M /var/log -bash: 611M: command not found pi@raspi:~ $ 609M /var/log/journal/646f283dbad041b98afadc09481d9d55 -bash: 609M: command not found pi@raspi:~ $ 609M /var/log/journal -bash: 609M: command not found pi@raspi:~ $ 203M /var/cache -bash: 203M: command not found pi@raspi:~ $ pi@raspi:~ $ Archived and active journals take up 608.8M in the file system. -bash: Archived: command not found pi@raspi:~ $ pi@raspi:~ $ /opt/iobroker/backups: -bash: /opt/iobroker/backups:: No such file or directory pi@raspi:~ $ 28M /opt/iobroker/backups/ -bash: 28M: command not found pi@raspi:~ $ pi@raspi:~ $ /opt/iobroker/iobroker-data: -bash: /opt/iobroker/iobroker-data:: No such file or directory pi@raspi:~ $ 343M /opt/iobroker/iobroker-data/ -bash: 343M: command not found pi@raspi:~ $ 224M /opt/iobroker/iobroker-data/files -bash: 224M: command not found pi@raspi:~ $ 76M /opt/iobroker/iobroker-data/backup-objects -bash: 76M: command not found pi@raspi:~ $ 67M /opt/iobroker/iobroker-data/files/javascript.admin -bash: 67M: command not found pi@raspi:~ $ 48M /opt/iobroker/iobroker-data/files/javascript.admin/static -bash: 48M: command not found pi@raspi:~ $ pi@raspi:~ $ The five largest files in iobroker-data are: -bash: The: command not found pi@raspi:~ $ 42M /opt/iobroker/iobroker-data/objects.jsonl -bash: 42M: command not found pi@raspi:~ $ 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map -bash: 33M: command not found pi@raspi:~ $ 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map -bash: 21M: command not found pi@raspi:~ $ 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js -bash: 8.5M: command not found pi@raspi:~ $ 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js -bash: 8.3M: command not found pi@raspi:~ $ pi@raspi:~ $ USB-Devices by-id: -bash: USB-Devices: command not found pi@raspi:~ $ USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': -bash: USB-Sticks: command not found pi@raspi:~ $ pi@raspi:~ $ /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 -bash: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00: Permission denied pi@raspi:~ $ pi@raspi:~ $ *** NodeJS-Installation *** -bash: Abfall2024.ics: command not found pi@raspi:~ $ pi@raspi:~ $ /usr/bin/nodejs v18.19.0 node:internal/modules/cjs/loader:1137 throw err; ^ Error: Cannot find module '/home/pi/v18.19.0' at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15) at Module._load (node:internal/modules/cjs/loader:975:27) at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) at node:internal/main/run_main_module:28:49 { code: 'MODULE_NOT_FOUND', requireStack: [] } Node.js v18.19.0 pi@raspi:~ $ /usr/bin/node v18.19.0 node:internal/modules/cjs/loader:1137 throw err; ^ Error: Cannot find module '/home/pi/v18.19.0' at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15) at Module._load (node:internal/modules/cjs/loader:975:27) at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) at node:internal/main/run_main_module:28:49 { code: 'MODULE_NOT_FOUND', requireStack: [] } Node.js v18.19.0 pi@raspi:~ $ /usr/bin/npm 10.2.3 Unknown command: "10.2.3" To see a list of supported npm commands, run: npm help pi@raspi:~ $ /usr/bin/npx 10.2.3 npm ERR! code E404 npm ERR! 404 Not Found - GET https://registry.npmjs.org/10.2.3 - Not found npm ERR! 404 npm ERR! 404 '10.2.3@*' is not in this registry. npm ERR! 404 npm ERR! 404 Note that you can also install from a npm ERR! 404 tarball, folder, http url, or git url. npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-01-24T18_14_59_263Z-debug-0.log pi@raspi:~ $ /usr/bin/corepack 0.22.0 Unknown Syntax Error: Command not found; did you mean one of: 0. corepack -h 1. corepack -v 2. corepack disable [--install-directory #0] ... 3. corepack enable [--install-directory #0] ... 4. corepack install <-g,--global> [--all] [--cache-only] ... 5. corepack install 6. corepack pack [--all] [--json] [-o,--output #0] ... 7. corepack up 8. corepack use <pattern> 9. corepack hydrate [--activate] <fileName> 10. corepack prepare [--activate] [--all] [--json] [-o,--output] ... While running 0.22.0 pi@raspi:~ $ pi@raspi:~ $ pi@raspi:~ $ nodejs: -bash: nodejs:: command not found pi@raspi:~ $ Installed: 18.19.0-1nodesource1 -bash: Installed:: command not found pi@raspi:~ $ Candidate: 18.19.0-1nodesource1 -bash: Candidate:: command not found pi@raspi:~ $ Version table: -bash: Version: command not found pi@raspi:~ $ 18.19.0+dfsg-6~deb12u1 500 -bash: 18.19.0+dfsg-6~deb12u1: command not found pi@raspi:~ $ 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ *** 18.19.0-1nodesource1 1001 -bash: Abfall2024.ics: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 100 /var/lib/dpkg/status -bash: 100: command not found pi@raspi:~ $ 18.18.2-1nodesource1 1001 -bash: 18.18.2-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.18.1-1nodesource1 1001 -bash: 18.18.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.18.0-1nodesource1 1001 -bash: 18.18.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.17.1-1nodesource1 1001 -bash: 18.17.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.17.0-1nodesource1 1001 -bash: 18.17.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages : raspi - disabled + system.adapter.i-bash: 500: command not found pi@raspi:~ $ 18.16.1-1nodesource1 1001 -bash: 18.16.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.16.0-1nodesource1 1001 -bash: 18.16.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.15.0-1nodesource1 1001 -bash: 18.15.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.14.2-1nodesource1 1001 -bash: 18.14.2-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.14.1-1nodesource1 1001 -bash: 18.14.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.14.0-1nodesource1 1001 -bash: 18.14.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.13.0+dfsg1-1 500 -bash: 18.13.0+dfsg1-1: command not found pi@raspi:~ $ 500 http://deb.debian.org/debian bookworm/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.13.0-1nodesource1 1001 -bash: 18.13.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.12.0-1nodesource1 1001 -bash: 18.12.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.11.0-1nodesource1 1001 -bash: 18.11.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.10.0-1nodesource1 1001 -bash: 18.10.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.9.1-1nodesource1 1001 -bash: 18.9.1-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.9.0-1nodesource1 1001 -bash: 18.9.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.8.0-1nodesource1 1001 -bash: 18.8.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.7.0-1nodesource1 1001 -bash: 18.7.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.6.0-1nodesource1 1001 -bash: 18.6.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.5.0-1nodesource1 1001 -bash: 18.5.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.4.0-1nodesource1 1001 -bash: 18.4.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.3.0-1nodesource1 1001 -bash: 18.3.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.2.0-1nodesource1 1001 -bash: 18.2.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.1.0-1nodesource1 1001 -bash: 18.1.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ 18.0.0-1nodesource1 1001 -bash: 18.0.0-1nodesource1: command not found pi@raspi:~ $ 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages -bash: 500: command not found pi@raspi:~ $ pi@raspi:~ $ Temp directories causing npm8 problem: 0 -bash: Temp: command not found pi@raspi:~ $ No problems detected -bash: No: command not found pi@raspi:~ $ pi@raspi:~ $ Errors in npm tree: -bash: Errors: command not found pi@raspi:~ $ pi@raspi:~ $ *** ioBroker-Installation *** -bash: Abfall2024.ics: command not found pi@raspi:~ $ pi@raspi:~ $ ioBroker Status -bash: ioBroker: command not found pi@raspi:~ $ iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspi - enabled system.adapter.backitup.0 : backitup : raspi - disabled + system.adapter.evohome.0 : evohome : raspi - enabled system.adapter.flot.0 : flot : raspi - disabled + system.adapter.growatt.0 : growatt : raspi - enabled + system.adapter.history.0 : history : raspi - enabled + system.adapter.hs100.0 : hs100 : raspi - enabled system.adapter.ical.0 : ical : raspi - enabled system.adapter.ical.1 : ical : raspi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspi - disabled + system.adapter.info.0 : info : raspi - enabled + system.adapter.iot.0 : iot : raspi - enabled + system.adapter.javascript.0 : javascript : raspi - enabled + system.adapter.lgtv.0 : lgtv : raspi - enabled system.adapter.mobile.0 : mobile : raspi - disabled + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 system.adapter.openweathermap.0 : openweathermap : raspi - enabled + system.adapter.ring.0 : ring : raspi - enabled + system.adapter.rpi2.0 : rpi2 : raspi - enabled system.adapter.socketio.0 : socketio : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.1 : tr-064 : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - disabled system.adapter.vis.0 : vis : raspi - enabled system.adapter.wallpanel.0 : wallpanel : raspi - disabled + system.adapter.web.0 : web iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>|<adapter>] Starts the js-controller or a specified adapter instance or all instances of an adapter iobroker stop [<adapter>.<instance>|<adapter>] stops the js-controller or a specified adapter instance or all instances of an adapter iobroker restart [<adapter>.<instance>|<adapter>] Restarts js-controller or a specified adapter instance or all instances of an adapter [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker nodejs-update [<major-version>] Upgrade the Node.JS installation to the current LTS iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker vendor <passphrase> [<vendor.json>] Update the vendor information using given passphrase iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean] pi@raspi:~ $Blickt da einer genau durch??
@norman sagte in IObroker startet jeden Abend neu!:
Blickt da einer genau durch??
Nein. Aber du hast auch irgendwas wirres in die Konsole geklatscht und das führt dann zu dem chaotischen Output.
Also nochmal sauber die Ausgabe voniob diagbitte. -
Bevor weiter rumprobiert wird, es ist derArbeitsspeicher. Der reicht nicht mehr. Mein System lief vorher auch Jahre, aber seit dem letztem Admin Update stürzte der immer wieder ab, auch wenn andere sagen das kann damit nichts zu tun haben.
Neue Kiste mit mehr Arbeitsspeicher und läuft jetzt wieder seit 50 Tagen ohne Ausfälle.Kannst dir meinen Thread dazu anschauen, hat die gleichen Werte ausgeworfen
https://forum.iobroker.net/topic/68713/gelöst-admin-adapter-restart-loop/3
-
Bevor weiter rumprobiert wird, es ist derArbeitsspeicher. Der reicht nicht mehr. Mein System lief vorher auch Jahre, aber seit dem letztem Admin Update stürzte der immer wieder ab, auch wenn andere sagen das kann damit nichts zu tun haben.
Neue Kiste mit mehr Arbeitsspeicher und läuft jetzt wieder seit 50 Tagen ohne Ausfälle.Kannst dir meinen Thread dazu anschauen, hat die gleichen Werte ausgeworfen
https://forum.iobroker.net/topic/68713/gelöst-admin-adapter-restart-loop/3
@johnnybahama das hat @Homoran schon im dritten Post geschrieben
https://forum.iobroker.net/topic/72131/iobroker-startet-jeden-abend-neu/3#
-
@norman sagte in IObroker startet jeden Abend neu!:
Blickt da einer genau durch??
Nein. Aber du hast auch irgendwas wirres in die Konsole geklatscht und das führt dann zu dem chaotischen Output.
Also nochmal sauber die Ausgabe voniob diagbitte.======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 09:29:50 up 14:23, 2 users, load average: 0.13, 0.10, 0.09 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2024-01-25 09:29:50 CET Universal time: Thu 2024-01-25 08:29:50 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.7G 108M 229K 225M 262M Swap: 104M 7.6M 97M Total: 2.0G 1.7G 205M 1848 M total memory 1597 M used memory 976 M active memory 624 M inactive memory 103 M free memory 1 M buffer memory 213 M swap cache 99 M total swap 7 M used swap 92 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 661M 0 661M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 627M /var/log 625M /var/log/journal/646f283dbad041b98afadc09481d9d55 625M /var/log/journal 203M /var/cache Archived and active journals take up 624.8M in the file system. /opt/iobroker/backups: 28M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 345M /opt/iobroker/iobroker-data/ 224M /opt/iobroker/iobroker-data/files 76M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 43M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspi - enabled system.adapter.backitup.0 : backitup : raspi - disabled + system.adapter.evohome.0 : evohome : raspi - enabled system.adapter.flot.0 : flot : raspi - disabled + system.adapter.growatt.0 : growatt : raspi - enabled + system.adapter.history.0 : history : raspi - enabled + system.adapter.hs100.0 : hs100 : raspi - enabled system.adapter.ical.0 : ical : raspi - enabled system.adapter.ical.1 : ical : raspi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspi - disabled + system.adapter.info.0 : info : raspi - enabled + system.adapter.iot.0 : iot : raspi - enabled + system.adapter.javascript.0 : javascript : raspi - enabled + system.adapter.lgtv.0 : lgtv : raspi - enabled system.adapter.mobile.0 : mobile : raspi - disabled + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 system.adapter.openweathermap.0 : openweathermap : raspi - enabled + system.adapter.ring.0 : ring : raspi - enabled + system.adapter.rpi2.0 : rpi2 : raspi - enabled system.adapter.socketio.0 : socketio : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.1 : tr-064 : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - disabled system.adapter.vis.0 : vis : raspi - enabled system.adapter.wallpanel.0 : wallpanel : raspi - disabled + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.web.1 : web : raspi - disabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspi - enabled system.adapter.ws.0 : ws : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 ioBroker-Repositories beta : http://download.iobroker.net/sources-dist-latest.json stabil : http://download.iobroker.net/sources-dist.json Active repo(s): stabil Installed ioBroker-Instances Used repository: stabil Objects database error: read ECONNRESET Objects database error: connect ECONNREFUSED 127.0.0.1:9001 Objects database error: connect ECONNREFUSED 127.0.0.1:9001 Objects database error: connect ECONNREFUSED 127.0.0.1:9001 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "growatt" : 3.2.1 , installed 3.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hs100" : 2.2.0 , installed 2.2.0 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "lgtv" : 2.1.2 , installed 2.1.2 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "wallpanel" : 0.3.11 , installed 0.3.11 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Objects and States Please stand by - This may take a while Objects: 6085 States: 16776 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 7 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.60:1884 0.0.0.0:* LISTEN 1001 542361 26603/io.mqtt.0 tcp 0 0 192.168.178.60:1885 0.0.0.0:* LISTEN 1001 542362 26603/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 539776 26064/iobroker.js-c tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 106 13880 613/redis-server 12 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13837 652/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 539836 26082/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 13839 652/sshd: /usr/sbin tcp6 0 0 ::1:6379 :::* LISTEN 106 13881 613/redis-server 12 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13770 453/avahi-daemon: r udp 0 0 0.0.0.0:36397 0.0.0.0:* 104 13772 453/avahi-daemon: r udp6 0 0 :::60534 :::* 104 13773 453/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13771 453/avahi-daemon: r udp6 0 0 fe80::c189:98ca:96e:546 :::* 0 13959 539/NetworkManager *** Log File - Last 25 Lines *** 2024-01-25 09:33:05.695 - info: javascript.0 (26128) Start javascript script.js.common.Waschmaschine_fertig_Ansage 2024-01-25 09:33:05.703 - info: javascript.0 (26128) script.js.common.Waschmaschine_fertig_Ansage: registered 1 subscription, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-01-25 09:33:05.778 - info: whatsapp-cmb.0 (26147) starting. Version 0.2.3 in /opt/iobroker/node_modules/iobroker.whatsapp-cmb, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:06.702 - info: host.raspi instance scheduled system.adapter.ical.1 0 3 * * * 2024-01-25 09:33:06.718 - info: host.raspi instance system.adapter.ical.1 started with pid 26215 2024-01-25 09:33:08.050 - info: ical.0 (26185) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:08.502 - info: ical.0 (26185) processing URL: Abfall /opt/iobroker/Abfall2024.ics 2024-01-25 09:33:10.149 - info: ical.1 (26215) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:10.250 - info: alexa2.0 (26157) Initialize all Device states ... 2024-01-25 09:33:10.688 - info: host.raspi instance system.adapter.mqtt.0 started with pid 26603 2024-01-25 09:33:10.898 - info: ical.1 (26215) processing URL: Frei https://calendar.google.com/calendar/ical/l8asmcgpumc56d3n6opmji52to%40group.calendar.google.com/public/basic.ics 2024-01-25 09:33:12.112 - warn: ical.0 (26185) Error reading from URL "http://www.eventfabrik24.de/Abfall2023.ics": 404 2024-01-25 09:33:12.119 - warn: ical.0 (26185) Error reading "http://www.eventfabrik24.de/Abfall2023.ics": Cannot read URL: "http://www.eventfabrik24.de/Abfall2023.ics" 2024-01-25 09:33:14.677 - info: host.raspi instance scheduled system.adapter.openweathermap.0 0 23 * * * 2024-01-25 09:33:14.692 - info: host.raspi instance system.adapter.openweathermap.0 started with pid 26625 2024-01-25 09:33:16.006 - info: ical.1 (26215) Terminated (NO_ERROR): Without reason 2024-01-25 09:33:16.687 - info: host.raspi instance system.adapter.ical.1 terminated with code 0 (NO_ERROR) 2024-01-25 09:33:17.233 - info: ical.0 (26185) Terminated (NO_ERROR): Without reason 2024-01-25 09:33:18.010 - info: host.raspi instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) 2024-01-25 09:33:18.790 - info: host.raspi instance system.adapter.rpi2.0 started with pid 27004 2024-01-25 09:33:20.344 - info: openweathermap.0 (26625) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:22.289 - info: rpi2.0 (27004) starting. Version 1.3.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:22.678 - error: rpi2.0 (27004) No Value found for cpu_frequency 2024-01-25 09:33:22.690 - info: host.raspi instance system.adapter.sonoff.0 started with pid 27052 2024-01-25 09:33:26.745 - info: host.raspi instance system.adapter.tr-064.1 started with pid 27060 ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary -
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 09:29:50 up 14:23, 2 users, load average: 0.13, 0.10, 0.09 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2024-01-25 09:29:50 CET Universal time: Thu 2024-01-25 08:29:50 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.7G 108M 229K 225M 262M Swap: 104M 7.6M 97M Total: 2.0G 1.7G 205M 1848 M total memory 1597 M used memory 976 M active memory 624 M inactive memory 103 M free memory 1 M buffer memory 213 M swap cache 99 M total swap 7 M used swap 92 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 661M 0 661M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 59G 4.8G 51G 9% / tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jan 24 19:06:02 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:2A:EE:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c7af47fd-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jan 24 19:06:05 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jan 24 19:06:07 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 627M /var/log 625M /var/log/journal/646f283dbad041b98afadc09481d9d55 625M /var/log/journal 203M /var/cache Archived and active journals take up 624.8M in the file system. /opt/iobroker/backups: 28M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 345M /opt/iobroker/iobroker-data/ 224M /opt/iobroker/iobroker-data/files 76M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 43M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 2 Adapter State + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspi - enabled system.adapter.backitup.0 : backitup : raspi - disabled + system.adapter.evohome.0 : evohome : raspi - enabled system.adapter.flot.0 : flot : raspi - disabled + system.adapter.growatt.0 : growatt : raspi - enabled + system.adapter.history.0 : history : raspi - enabled + system.adapter.hs100.0 : hs100 : raspi - enabled system.adapter.ical.0 : ical : raspi - enabled system.adapter.ical.1 : ical : raspi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspi - disabled + system.adapter.info.0 : info : raspi - enabled + system.adapter.iot.0 : iot : raspi - enabled + system.adapter.javascript.0 : javascript : raspi - enabled + system.adapter.lgtv.0 : lgtv : raspi - enabled system.adapter.mobile.0 : mobile : raspi - disabled + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 system.adapter.openweathermap.0 : openweathermap : raspi - enabled + system.adapter.ring.0 : ring : raspi - enabled + system.adapter.rpi2.0 : rpi2 : raspi - enabled system.adapter.socketio.0 : socketio : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.1 : tr-064 : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - disabled system.adapter.vis-inventwo.0 : vis-inventwo : raspi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - disabled system.adapter.vis.0 : vis : raspi - enabled system.adapter.wallpanel.0 : wallpanel : raspi - disabled + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.web.1 : web : raspi - disabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspi - enabled system.adapter.ws.0 : ws : raspi - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspi - enabled, port: 1884, bind: 192.168.178.60 + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193675CD-if00 ioBroker-Repositories beta : http://download.iobroker.net/sources-dist-latest.json stabil : http://download.iobroker.net/sources-dist.json Active repo(s): stabil Installed ioBroker-Instances Used repository: stabil Objects database error: read ECONNRESET Objects database error: connect ECONNREFUSED 127.0.0.1:9001 Objects database error: connect ECONNREFUSED 127.0.0.1:9001 Objects database error: connect ECONNREFUSED 127.0.0.1:9001 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "growatt" : 3.2.1 , installed 3.2.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hs100" : 2.2.0 , installed 2.2.0 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "lgtv" : 2.1.2 , installed 2.1.2 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "wallpanel" : 0.3.11 , installed 0.3.11 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Objects and States Please stand by - This may take a while Objects: 6085 States: 16776 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 7 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.60:1884 0.0.0.0:* LISTEN 1001 542361 26603/io.mqtt.0 tcp 0 0 192.168.178.60:1885 0.0.0.0:* LISTEN 1001 542362 26603/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 539776 26064/iobroker.js-c tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 106 13880 613/redis-server 12 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13837 652/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 539836 26082/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 13839 652/sshd: /usr/sbin tcp6 0 0 ::1:6379 :::* LISTEN 106 13881 613/redis-server 12 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13770 453/avahi-daemon: r udp 0 0 0.0.0.0:36397 0.0.0.0:* 104 13772 453/avahi-daemon: r udp6 0 0 :::60534 :::* 104 13773 453/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13771 453/avahi-daemon: r udp6 0 0 fe80::c189:98ca:96e:546 :::* 0 13959 539/NetworkManager *** Log File - Last 25 Lines *** 2024-01-25 09:33:05.695 - info: javascript.0 (26128) Start javascript script.js.common.Waschmaschine_fertig_Ansage 2024-01-25 09:33:05.703 - info: javascript.0 (26128) script.js.common.Waschmaschine_fertig_Ansage: registered 1 subscription, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-01-25 09:33:05.778 - info: whatsapp-cmb.0 (26147) starting. Version 0.2.3 in /opt/iobroker/node_modules/iobroker.whatsapp-cmb, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:06.702 - info: host.raspi instance scheduled system.adapter.ical.1 0 3 * * * 2024-01-25 09:33:06.718 - info: host.raspi instance system.adapter.ical.1 started with pid 26215 2024-01-25 09:33:08.050 - info: ical.0 (26185) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:08.502 - info: ical.0 (26185) processing URL: Abfall /opt/iobroker/Abfall2024.ics 2024-01-25 09:33:10.149 - info: ical.1 (26215) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:10.250 - info: alexa2.0 (26157) Initialize all Device states ... 2024-01-25 09:33:10.688 - info: host.raspi instance system.adapter.mqtt.0 started with pid 26603 2024-01-25 09:33:10.898 - info: ical.1 (26215) processing URL: Frei https://calendar.google.com/calendar/ical/l8asmcgpumc56d3n6opmji52to%40group.calendar.google.com/public/basic.ics 2024-01-25 09:33:12.112 - warn: ical.0 (26185) Error reading from URL "http://www.eventfabrik24.de/Abfall2023.ics": 404 2024-01-25 09:33:12.119 - warn: ical.0 (26185) Error reading "http://www.eventfabrik24.de/Abfall2023.ics": Cannot read URL: "http://www.eventfabrik24.de/Abfall2023.ics" 2024-01-25 09:33:14.677 - info: host.raspi instance scheduled system.adapter.openweathermap.0 0 23 * * * 2024-01-25 09:33:14.692 - info: host.raspi instance system.adapter.openweathermap.0 started with pid 26625 2024-01-25 09:33:16.006 - info: ical.1 (26215) Terminated (NO_ERROR): Without reason 2024-01-25 09:33:16.687 - info: host.raspi instance system.adapter.ical.1 terminated with code 0 (NO_ERROR) 2024-01-25 09:33:17.233 - info: ical.0 (26185) Terminated (NO_ERROR): Without reason 2024-01-25 09:33:18.010 - info: host.raspi instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) 2024-01-25 09:33:18.790 - info: host.raspi instance system.adapter.rpi2.0 started with pid 27004 2024-01-25 09:33:20.344 - info: openweathermap.0 (26625) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:22.289 - info: rpi2.0 (27004) starting. Version 1.3.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v18.19.0, js-controller: 5.0.17 2024-01-25 09:33:22.678 - error: rpi2.0 (27004) No Value found for cpu_frequency 2024-01-25 09:33:22.690 - info: host.raspi instance system.adapter.sonoff.0 started with pid 27052 2024-01-25 09:33:26.745 - info: host.raspi instance system.adapter.tr-064.1 started with pid 27060 ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary@norman sagte in IObroker startet jeden Abend neu!:
*** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.7G 108M 229K 225M 262MDas wird zu wenig sein. Bei Lastspitzen knickt dir das weg.
-
Bevor weiter rumprobiert wird, es ist derArbeitsspeicher. Der reicht nicht mehr. Mein System lief vorher auch Jahre, aber seit dem letztem Admin Update stürzte der immer wieder ab, auch wenn andere sagen das kann damit nichts zu tun haben.
Neue Kiste mit mehr Arbeitsspeicher und läuft jetzt wieder seit 50 Tagen ohne Ausfälle.Kannst dir meinen Thread dazu anschauen, hat die gleichen Werte ausgeworfen
https://forum.iobroker.net/topic/68713/gelöst-admin-adapter-restart-loop/3
nicht, dass ich dir nicht glauben will, will das nur etwas genauer verstehen. er kommt bei mir ja gar nicht über die 1500MB Speicherbedarf drüber bevor er abschmiert, da is ja eigentlich noch etwas Luft.....
-
nicht, dass ich dir nicht glauben will, will das nur etwas genauer verstehen. er kommt bei mir ja gar nicht über die 1500MB Speicherbedarf drüber bevor er abschmiert, da is ja eigentlich noch etwas Luft.....
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem. -
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem.@thomas-braun said in IObroker startet jeden Abend neu!:
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem.ja, knapp is es schon....aber es gibt doch noch mehr Leute hier, die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufen :-(Also auf n Pi5 gehen??
-
@thomas-braun said in IObroker startet jeden Abend neu!:
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem.ja, knapp is es schon....aber es gibt doch noch mehr Leute hier, die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufen :-(Also auf n Pi5 gehen??
@norman sagte in IObroker startet jeden Abend neu!:
die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufenDie haben dann aber nicht wie du da 18 Instanzen laufen.
Man kann mit einem durchschnittlichen Bedarf von 80-100MB pro Instanz rechnen. Da bist du also alleine mit dem iobroker schon fast dicht. Und das Betriebssystem braucht ja auch noch was Luft zum atmen. -
@thomas-braun said in IObroker startet jeden Abend neu!:
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem.ja, knapp is es schon....aber es gibt doch noch mehr Leute hier, die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufen :-(Also auf n Pi5 gehen??
@norman sagte in IObroker startet jeden Abend neu!:
Also auf n Pi5 gehen??
muss kein pi5 sein, gibt auch pi4 mit 4 und 8 GB.
@norman sagte in IObroker startet jeden Abend neu!:
er kommt bei mir ja gar nicht über die 1500MB Speicherbedarf drüber bevor er abschmiert
woher weisst du das?
Da wird wahrscheinlich intern schon Speicher freigeräumt indem Prozesse gestoppt werden.
...bis dann lebenswichtige Prozesse dran glauben müssen. -
@thomas-braun said in IObroker startet jeden Abend neu!:
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem.ja, knapp is es schon....aber es gibt doch noch mehr Leute hier, die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufen :-(Also auf n Pi5 gehen??
@norman said in IObroker startet jeden Abend neu!:
@thomas-braun said in IObroker startet jeden Abend neu!:
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem.ja, knapp is es schon....aber es gibt doch noch mehr Leute hier, die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufen :-(Also auf n Pi5 gehen??
Ein Pi4 mit mehr Arbeitsspeicher, oder ein Mini-PC (NUC o.Ä.) wäre auch eine Option, wenn die IO-Pins des Pi nicht gebraucht werden....
Eine weitere Option wäre, ggfs die ioBroker Installation zu verschlanken. Adapter, die man probeweise installiert hat anhalten oder deinstallieren, Aufgaben an Slave-ioBroker auslagern usw... In aller Regel ist das aber keine Lösung, die dauerhaft funktioniert ...
Mein in der Signatur genanntes System kommt mit unter 10 Watt aus ... Tagesverbrauch ca 0,2 kWh ...
Mein Celeron 3000 ist aber ziemlich lahm (irgendwo zwischen Pi3 und Pi4), das System hat aber auch ohne RAM und SSD nur 69€ incl Gehäuse und Netzteil als "Refurbished" gekostet...
-
@thomas-braun said in IObroker startet jeden Abend neu!:
Da sind noch 262MB verfügbar. So viel Luft ist da also nicht mehr.
Wenn jetzt ein Adapter sich mehr genehmigen muss (z. B. weil ein Backup läuft) hast du ein Problem.ja, knapp is es schon....aber es gibt doch noch mehr Leute hier, die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufen :-(Also auf n Pi5 gehen??
@norman sagte in IObroker startet jeden Abend neu!:
ja, knapp is es schon....aber es gibt doch noch mehr Leute hier, die IOb auf nem 2GBPi4 rennen haben.....
Oder ich hab zuviel Instanzen am laufenIch finde, du hättest schon noch ein wenig Optimierungspotential, um die Zeit bis zur neuen Hardware zu überbrücken. Den Info-Adapter würde ich wegwerfen und ob man bei DER Anzahl von States eine redis-DB betreiben muss? Ich weiß nicht ...
Also auf n Pi5 gehen??
Wenn das Geld ein Thema ist und du mit der CPU Leistung zufrieden bist, warum nicht einen gebrauchten Pi4 mit 4 oder 8 GB RAM?
-
@norman sagte in IObroker startet jeden Abend neu!:
Also auf n Pi5 gehen??
muss kein pi5 sein, gibt auch pi4 mit 4 und 8 GB.
@norman sagte in IObroker startet jeden Abend neu!:
er kommt bei mir ja gar nicht über die 1500MB Speicherbedarf drüber bevor er abschmiert
woher weisst du das?
Da wird wahrscheinlich intern schon Speicher freigeräumt indem Prozesse gestoppt werden.
...bis dann lebenswichtige Prozesse dran glauben müssen.@homoran said in IObroker startet jeden Abend neu!:
@norman sagte in IObroker startet jeden Abend neu!:
Also auf n Pi5 gehen??
muss kein pi5 sein, gibt auch pi4 mit 4 und 8 GB.
Joa, stimmt schon, macht aber preislich ja schon kaum noch einen Unterschied, da kann man das gleich auf den 5er gehen.
Oder hat der HW-technisch irgendwelche Nachteile beim IOB-Betrieb? -
@homoran said in IObroker startet jeden Abend neu!:
@norman sagte in IObroker startet jeden Abend neu!:
Also auf n Pi5 gehen??
muss kein pi5 sein, gibt auch pi4 mit 4 und 8 GB.
Joa, stimmt schon, macht aber preislich ja schon kaum noch einen Unterschied, da kann man das gleich auf den 5er gehen.
Oder hat der HW-technisch irgendwelche Nachteile beim IOB-Betrieb?@norman sagte in IObroker startet jeden Abend neu!:
macht aber preislich ja schon kaum noch einen Unterschied
mal schnell bei einem Händler verglichen: bei 8GB 95 vs 79 Euro (Ohne Gewähr auf Vollständigkeit)
@norman sagte in IObroker startet jeden Abend neu!:
Oder hat der HW-technisch irgendwelche Nachteile beim IOB-Betrieb?
außer dem höheren Stromverbrauch eher nicht.
-
@homoran said in IObroker startet jeden Abend neu!:
@norman sagte in IObroker startet jeden Abend neu!:
Also auf n Pi5 gehen??
muss kein pi5 sein, gibt auch pi4 mit 4 und 8 GB.
Joa, stimmt schon, macht aber preislich ja schon kaum noch einen Unterschied, da kann man das gleich auf den 5er gehen.
Oder hat der HW-technisch irgendwelche Nachteile beim IOB-Betrieb? -
@norman sagte in IObroker startet jeden Abend neu!:
macht aber preislich ja schon kaum noch einen Unterschied
mal schnell bei einem Händler verglichen: bei 8GB 95 vs 79 Euro (Ohne Gewähr auf Vollständigkeit)
@norman sagte in IObroker startet jeden Abend neu!:
Oder hat der HW-technisch irgendwelche Nachteile beim IOB-Betrieb?
außer dem höheren Stromverbrauch eher nicht.
@homoran said in IObroker startet jeden Abend neu!:
@norman sagte in IObroker startet jeden Abend neu!:
macht aber preislich ja schon kaum noch einen Unterschied
mal schnell bei einem Händler verglichen: bei 8GB 95 vs 79 Euro (Ohne Gewähr auf Vollständigkeit)
ja, bei Berrybase 93,90€ zu 79,90, bei 4GB Ram sind sogar knapp unter 10€ Preisunterschied
-
@norman Es wurde ja vorgeschlagen einen gebrauchten Pi4 zu versuchen, aber da habe ich schon gewisse Vorbehalte. Ein geschrotteter IO-Pin ist nicht schnell erkennbar, und ansonsten könnte der Pi dann bei ersten Tests unauffällig sein ....
@martinp said in IObroker startet jeden Abend neu!:
@norman Es wurde ja vorgeschlagen einen gebrauchten Pi4 zu versuchen, aber da habe ich schon gewisse Vorbehalte. Ein geschrotteter IO-Pin ist nicht schnell erkennbar, und ansonsten könnte der Pi dann bei ersten Tests unauffällig sein ....
Joa, hab eben auch mal kurz auf Kleinanzeigen geschaut, die sind ja z.T. teuerer als neue im Netz, die haben zum Teil echt seltsame Preisvorstellungen.
okay, DANKE nochmals @all !
Ich habe jetzt mal ein paar nicht so wichtige Instanzen bzw. Spielerein deaktiviert und schaue mal, ob er jetzt so stabiler läuft.
Wenns so klappt, stell ich um ;-)Ich geb auf jeden Fall Rückmeldung!
-
@homoran said in IObroker startet jeden Abend neu!:
@norman sagte in IObroker startet jeden Abend neu!:
macht aber preislich ja schon kaum noch einen Unterschied
mal schnell bei einem Händler verglichen: bei 8GB 95 vs 79 Euro (Ohne Gewähr auf Vollständigkeit)
ja, bei Berrybase 93,90€ zu 79,90, bei 4GB Ram sind sogar knapp unter 10€ Preisunterschied
Oder ein Futro S740 ...
https://www.heise.de/select/ct/2023/6/2301013201757655367
https://browser.geekbench.com/v5/cpu/20833684
Geekbench 5.5.1 Multi Core 1449
Pi5 1608
Pi4 789
Mein Celeron3000 426 ;-(
https://browser.geekbench.com/v5/cpu/19722005Bei den Futros muss man aber aufpassen, die S720 und S920 werden DEUTLICH günstiger angeboten, sind aber mit alten AMD G-Prozessoren ausgestattet, sind auch eher bei 300 .. 500 im Geekbench... Stromverbrauch liegt auch bei um die 10 Watt
-
nicht, dass ich dir nicht glauben will, will das nur etwas genauer verstehen. er kommt bei mir ja gar nicht über die 1500MB Speicherbedarf drüber bevor er abschmiert, da is ja eigentlich noch etwas Luft.....
@norman Das wird sich auch nicht ändern. Nachdem du umgezogen bist, siehst du das du über die 2GB kommst. Fakt ist, du kannst dich jetzt weiter ärgern das er absgürzt oder Adapter deinstallieren damit es wieder geht oder ne größere Kiste besorgen und sorgenfrei sein.
Nimm am besten nen Futro und nicht nen Pi. Die sind etwas grßer ja, aber da kannste die Ramriegel wenigstens tauschen. Zudem sind die günstiger.
416
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge