So hab jetzt mal einen neuen Zigbee Cordinator gekauft von Texas Intrument LAUNCHXL-CC26X2R1 weil ich immer wieder diese Fehlermeldung hatte ( auch nach abziehen des Cordinators und erneut einstecken tipp von @arteck )
Send command to 0x04cf8cdf3c8e4d5c failed with no error code (SREQ '--> ZDO - extRouteDisc - {"dstAddr":47258,"options":0,"radius":30}' failed with status '(0xc7: NWK_TABLE_FULL)
Send command to 0x54ef44100088d6f5 failed with no error code (SREQ '--> ZDO - extRouteDisc - {"dstAddr":33166,"options":0,"radius":30}' failed with status '(0xc7: NWK_TABLE_FULL)
zigbee.0
2024-01-12 10:48:50.441 error Send command to 0x54ef44100088d8c5 failed with no error code (SREQ '--> ZDO - extRouteDisc - {"dstAddr":42116,"options":0,"radius":30}' failed with status '(0xc7: NWK_TABLE_FULL)
zigbee.0
2024-01-12 10:48:50.426 error Send command to 0x54ef44100088d9bd failed with no error code (SREQ '--> ZDO - extRouteDisc - {"dstAddr":24876,"options":0,"radius":30}' failed with status '(0xc7: NWK_TABLE_FULL)
zigbee.0
2024-01-12 10:48:50.412 error Send command to 0x04cf8cdf3c8e4d5c failed with no error code (SREQ '--> ZDO - extRouteDisc - {"dstAddr":47258,"options":0,"radius":30}' failed with status '(0xc7: NWK_TABLE_FULL)
Send command to 0x00158d000286b630 failed with no error code (Timeout - 47769 - 1 - 11 - 6 - 11 after 10000ms)
Paar Tage hat es wieder funktioniert, doch jetzt erneut diese Fehlermeldungen
Firmware ist die neuste auf den cc26X2R1 und Zigbee die neuste vom Github
Geräte Total 96
Immer wieder bekomme ich auch diese Fehlermeldung auch nach mehrmals abziehen der Batterie:
State value to set for "zigbee.0.00158d0004aacb15.humidity" has value "654.36" greater than max "100"