[Gelöst] Keine Netzwerkverbindung zum iobroker mehr möglich
-
Ich habe mir die Videoanleitung angeschaut und dann das nachgemacht. Aber was für genaue Befehle das waren habe ich mir nicht aufgeschrieben
Anfangs den Resberry PI über den Installer installieren.
Auf jedenfall waren diese Befehle dabei:
sudo apt update
sudo apt full-upgradesudo apt install curl
curl -sLf https://iobroker.net/install.sh | bash -
Beantwortet das ungefähr deine Frage?
-
@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
Ich habe mir die Videoanleitung angeschaut
welche?
@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
Beantwortet das ungefähr deine Frage
nicht wirklich.
Leider gibt es bei Jutjub viel Mist.
Entweder klemmt es deswegen, oder weil deine Karte rappelvoll war, hat sich das Dateisystem zerlegt, weil geänderte Daten nicht mehr weggeschriebrn werden konnten. -
@homoran said in Keine Netzwerkverbindung zum iobroker mehr möglich:
Ich habe mir die Videoanleitung angeschaut
An das Video kommt man nur per Login dran
-
@homoran er hat doch geschrieben iobroker Master Kurs von Matthias
-
@wendy2702 wo?
hab ich nicht gefu den!
ich hatte schon eine Hai denangst, er hätte woanders zugeschnappt. -
@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
@homoran said in Keine Netzwerkverbindung zum iobroker mehr möglich:
wie hast du iobroker installiert?
Ich habe den ioBroker masterkurs von Matthias Kleine besucht, mir die Videos angeschaut und das nachgemacht.
-
@wendy2702 da hat wohl der Cache wieder zugeschlagen
-
curl -fsL https://iobroker.net/fix.sh | bash - -
@wendy2702 said in Keine Netzwerkverbindung zum iobroker mehr möglich:
curl -fsL https://iobroker.net/fix.sh | bash -
lief alles wunderbar durch
iobroker@iobroker:~ $ curl -fsL https://iobroker.net/fix.sh | bash - library: loaded Library version=2024-01-04 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== Hit:1 http://deb.debian.org/debian bullseye InRelease Get:2 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB] Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:6 https://repos.influxdata.com/debian bullseye InRelease Fetched 44.1 kB in 2s (29.3 kB/s) Reading package lists... Done ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== [sudo] password for iobroker: Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== iobroker@iobroker:~ $ -
habe iobroker start geklickt aber das Problem ist immer noch das selbe
-
@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
habe iobroker start geklickt aber das Problem ist immer noch das selbe
Geklickt?
Wo?
Ist das ne Windows Installation?
-
iob nodejs-update -
Sorry falsches wording
Getippt natürlich
ich habe jetzt auch nochmal das mit dem Nodejs-update probiert. Jetzt passiert auch was
-
habe ich jetzt gemacht
ioBroker nodejs updater 2023-10-13 Recommended nodejs-version is: 18.19.1 Checking your installation now. Please be patient! Your current setup is: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 We found these nodejs versions available for installation: nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Nothing to do - Your installation is using the correct paths. You are running nodejs v18.17.1. Do you want to install recommended version 18.19.1? Press <y> to continue or any other key to quit Trying to update your installation now. Please be patient. Waiting for ioBroker to shut down - Give me a minute... ############################################################ *** These repos are active on your system: Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Done *** Installing ca-certificates, curl and gnupg, just in case they are missing. (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../curl_7.74.0-1.3+deb11u11_arm64.deb ... Unpacking curl (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u9) ... Preparing to unpack .../libcurl4_7.74.0-1.3+deb11u11_arm64.deb ... Unpacking libcurl4:arm64 (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u9) ... Setting up libcurl4:arm64 (7.74.0-1.3+deb11u11) ... Setting up curl (7.74.0-1.3+deb11u11) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u7) ... *** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Package: nodejs Pin: origin deb.nodesource.com Pin-Priority: 1001 *** These repos are active after the adjustments: Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Get:5 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB] Hit:6 https://repos.influxdata.com/debian bullseye InRelease Get:7 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [7416 B] Get:8 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages [7392 B] Fetched 26.9 kB in 3s (9220 B/s) Reading package lists... Done Installing the recommended nodejs version now! Installing the recommended nodejs version! Extracting templates from packages: 100% Preconfiguring packages ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../base-files_11.1+deb11u9_arm64.deb ... Unpacking base-files (11.1+deb11u9) over (11.1+deb11u8) ... Setting up base-files (11.1+deb11u9) ... Installing new version of config file /etc/debian_version ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../libperl5.32_5.32.1-4+deb11u3_arm64.deb ... Unpacking libperl5.32:arm64 (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Preparing to unpack .../perl_5.32.1-4+deb11u3_arm64.deb ... Unpacking perl (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Preparing to unpack .../perl-base_5.32.1-4+deb11u3_arm64.deb ... Unpacking perl-base (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Setting up perl-base (5.32.1-4+deb11u3) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../perl-modules-5.32_5.32.1-4+deb11u3_all.deb ... Unpacking perl-modules-5.32 (5.32.1-4+deb11u3) over (5.32.1-4+deb11u2) ... Preparing to unpack .../tar_1.34+dfsg-1+deb11u1_arm64.deb ... Unpacking tar (1.34+dfsg-1+deb11u1) over (1.34+dfsg-1) ... Setting up tar (1.34+dfsg-1+deb11u1) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../0-nftables_0.9.8-3.1+deb11u2_arm64.deb ... Unpacking nftables (0.9.8-3.1+deb11u2) over (0.9.8-3.1+deb11u1) ... Preparing to unpack .../1-libnftables1_0.9.8-3.1+deb11u2_arm64.deb ... Unpacking libnftables1:arm64 (0.9.8-3.1+deb11u2) over (0.9.8-3.1+deb11u1) ... Preparing to unpack .../2-libglib2.0-dev_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-dev:arm64 (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../3-libglib2.0-dev-bin_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-dev-bin (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../4-libglib2.0-data_2.66.8-1+deb11u1_all.deb ... Unpacking libglib2.0-data (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../5-libglib2.0-bin_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-bin (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../6-libglib2.0-0_2.66.8-1+deb11u1_arm64.deb ... Unpacking libglib2.0-0:arm64 (2.66.8-1+deb11u1) over (2.66.8-1) ... Preparing to unpack .../7-bluez_5.55-3.1+rpt2+deb11u1_arm64.deb ... Unpacking bluez (5.55-3.1+rpt2+deb11u1) over (5.55-3.1+rpt2) ... Preparing to unpack .../8-libssl1.1_1.1.1w-0+deb11u1+rpt1_arm64.deb ... Unpacking libssl1.1:arm64 (1.1.1w-0+deb11u1+rpt1) over (1.1.1w-0+deb11u1) ... Setting up libssl1.1:arm64 (1.1.1w-0+deb11u1+rpt1) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../openssh-sftp-server_1%3a8.4p1-5+deb11u3_arm64.deb ... Unpacking openssh-sftp-server (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../openssh-server_1%3a8.4p1-5+deb11u3_arm64.deb ... Unpacking openssh-server (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../openssh-client_1%3a8.4p1-5+deb11u3_arm64.deb ... Unpacking openssh-client (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../ssh_1%3a8.4p1-5+deb11u3_all.deb ... Unpacking ssh (1:8.4p1-5+deb11u3) over (1:8.4p1-5+deb11u2) ... Preparing to unpack .../libgnutls30_3.7.1-5+deb11u4_arm64.deb ... Unpacking libgnutls30:arm64 (3.7.1-5+deb11u4) over (3.7.1-5+deb11u3) ... Setting up libgnutls30:arm64 (3.7.1-5+deb11u4) ... (Reading database ... 50480 files and directories currently installed.) Preparing to unpack .../00-tzdata_2024a-0+deb11u1_all.deb ... Unpacking tzdata (2024a-0+deb11u1) over (2021a-1+deb11u10) ... Preparing to unpack .../01-bind9-libs_1%3a9.16.48-1_arm64.deb ... Unpacking bind9-libs:arm64 (1:9.16.48-1) over (1:9.16.44-1~deb11u1) ... Preparing to unpack .../02-bind9-host_1%3a9.16.48-1_arm64.deb ... Unpacking bind9-host (1:9.16.48-1) over (1:9.16.44-1~deb11u1) ... Preparing to unpack .../03-bluez-firmware_1.2-4+rpt11_all.deb ... Unpacking bluez-firmware (1.2-4+rpt11) over (1.2-4+rpt10) ... Preparing to unpack .../04-cifs-utils_2%3a6.11-3.1+deb11u2_arm64.deb ... Unpacking cifs-utils (2:6.11-3.1+deb11u2) over (2:6.11-3.1+deb11u1) ... Preparing to unpack .../05-distro-info-data_0.51+deb11u5_all.deb ... Unpacking distro-info-data (0.51+deb11u5) over (0.51+deb11u4) ... Preparing to unpack .../06-firmware-atheros_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-atheros (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../07-firmware-brcm80211_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-brcm80211 (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../08-firmware-libertas_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-libertas (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../09-firmware-misc-nonfree_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-misc-nonfree (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../10-firmware-realtek_1%3a20230210-5~bpo11+1+rpt2_all.deb ... Unpacking firmware-realtek (1:20230210-5~bpo11+1+rpt2) over (1:20230210-5~bpo11+1+rpt1) ... Preparing to unpack .../11-libbluetooth3_5.55-3.1+rpt2+deb11u1_arm64.deb ... Unpacking libbluetooth3:arm64 (5.55-3.1+rpt2+deb11u1) over (5.55-3.1+rpt2) ... Preparing to unpack .../12-libnghttp2-14_1.43.0-1+deb11u1_arm64.deb ... Unpacking libnghttp2-14:arm64 (1.43.0-1+deb11u1) over (1.43.0-1) ... Preparing to unpack .../13-libcurl3-gnutls_7.74.0-1.3+deb11u11_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u9) ... Preparing to unpack .../14-libtiff5_4.2.0-1+deb11u5_arm64.deb ... Unpacking libtiff5:arm64 (4.2.0-1+deb11u5) over (4.2.0-1+deb11u4) ... Preparing to unpack .../15-nodejs_18.19.1-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (18.19.1-1nodesource1) over (18.17.1-deb-1nodesource1) ... Preparing to unpack .../16-openssl_1.1.1w-0+deb11u1+rpt1_arm64.deb ... Unpacking openssl (1.1.1w-0+deb11u1+rpt1) over (1.1.1w-0+deb11u1) ... Preparing to unpack .../17-raspi-config_20231012~bullseye_all.deb ... Unpacking raspi-config (20231012~bullseye) over (20230214) ... Setting up bluez-firmware (1.2-4+rpt11) ... Setting up libnftables1:arm64 (0.9.8-3.1+deb11u2) ... Setting up nftables (0.9.8-3.1+deb11u2) ... Setting up bind9-libs:arm64 (1:9.16.48-1) ... Setting up libglib2.0-0:arm64 (2.66.8-1+deb11u1) ... No schema files found: doing nothing. Setting up distro-info-data (0.51+deb11u5) ... Setting up openssh-client (1:8.4p1-5+deb11u3) ... Setting up perl-modules-5.32 (5.32.1-4+deb11u3) ... Setting up firmware-atheros (1:20230210-5~bpo11+1+rpt2) ... Setting up cifs-utils (2:6.11-3.1+deb11u2) ... Setting up firmware-misc-nonfree (1:20230210-5~bpo11+1+rpt2) ... Setting up libnghttp2-14:arm64 (1.43.0-1+deb11u1) ... Setting up libcurl3-gnutls:arm64 (7.74.0-1.3+deb11u11) ... Setting up nodejs (18.19.1-1nodesource1) ... Setting up tzdata (2024a-0+deb11u1) ... Current default time zone: 'Europe/Berlin' Local time is now: Sun Feb 25 22:12:24 CET 2024. Universal Time is now: Sun Feb 25 21:12:24 UTC 2024. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up bluez (5.55-3.1+rpt2+deb11u1) ... Installing new version of config file /etc/bluetooth/input.conf ... Setting up libglib2.0-data (2.66.8-1+deb11u1) ... Setting up firmware-brcm80211 (1:20230210-5~bpo11+1+rpt2) ... Setting up firmware-realtek (1:20230210-5~bpo11+1+rpt2) ... Setting up libperl5.32:arm64 (5.32.1-4+deb11u3) ... Setting up firmware-libertas (1:20230210-5~bpo11+1+rpt2) ... Setting up libbluetooth3:arm64 (5.55-3.1+rpt2+deb11u1) ... Setting up libtiff5:arm64 (4.2.0-1+deb11u5) ... Setting up bind9-host (1:9.16.48-1) ... Setting up openssl (1.1.1w-0+deb11u1+rpt1) ... Setting up raspi-config (20231012~bullseye) ... Setting up libglib2.0-dev-bin (2.66.8-1+deb11u1) ... Setting up openssh-sftp-server (1:8.4p1-5+deb11u3) ... Setting up openssh-server (1:8.4p1-5+deb11u3) ... rescue-ssh.target is a disabled or a static unit, not starting it. Setting up libglib2.0-bin (2.66.8-1+deb11u1) ... Setting up perl (5.32.1-4+deb11u3) ... Setting up libglib2.0-dev:arm64 (2.66.8-1+deb11u1) ... Setting up ssh (1:8.4p1-5+deb11u3) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for dbus (1.12.28-0+deb11u1) ... Processing triggers for mailcap (3.69) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u7) ... Processing triggers for initramfs-tools (0.140) ... We tried our best to update or fix your nodejs. Please run iob diag again to verify. *** RESTARTING ioBroker NOW! *** Please refresh or restart your browser in a few moments. -
-
@wendy2702 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
Geklickt?
Wo?@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
freedesktop
??
-
-
@homoran sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
@wendy2702 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
Geklickt?
Wo?@airframe75 sagte in Keine Netzwerkverbindung zum iobroker mehr möglich:
freedesktop
??
Deshalb war ich verwundert ob eventuell iob in einer Virtualisierung unter Win läuft
-
freedesktop ist mit dem dbus-Dienst verbandelt. Da läuft kein Desktop notwendigerweise.
-
ich habe jetzt so häufig iob diag eingegeben. Jetzt möchte ich es auch zeigen.
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 22:17:40 up 46 min, 1 user, load average: 0.42, 1.30, 1.01 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-02-25 22:17:40 CET Universal time: Sun 2024-02-25 21:17:40 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth gpio i2c spi *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.6G 889M 1.0M 1.3G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.6G 989M 3794 M total memory 1628 M used memory 1621 M active memory 1020 M inactive memory 889 M free memory 77 M buffer memory 1198 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * influxdb.service loaded failed failed InfluxDB is an open-source, distributed, time series database LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 6.4G 22G 23% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Feb 25 21:31:11 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FB:C3:CA vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=8f761cd6-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Feb 25 21:31:12 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Feb 25 21:31:12 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun Feb 25 21:31:14 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.0G /var/ 2.4G /var/log 801M /var/log/journal/54548f5b193440069d487fa9f59dd13a 801M /var/log/journal 355M /var/cache Archived and active journals take up 800.4M in the file system. /opt/iobroker/backups: 239M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 345M /opt/iobroker/iobroker-data/ 237M /opt/iobroker/iobroker-data/files 75M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 43M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 26M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 18M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.274a4d8d.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.1 : backitup : iobroker - enabled system.adapter.bydhvs.0 : bydhvs : iobroker - disabled + system.adapter.device-reminder.0 : device-reminder : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled system.adapter.feiertage.0 : feiertage : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fronius-solarweb.0 : fronius-solarweb : iobroker - enabled + system.adapter.fronius-wattpilot.1 : fronius-wattpilot : iobroker - enabled + system.adapter.fronius-wattpilot.2 : fronius-wattpilot : iobroker - enabled + system.adapter.fronius.0 : fronius : iobroker - enabled + system.adapter.fronius.1 : fronius : iobroker - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.meross.0 : meross : iobroker - enabled system.adapter.ping.0 : ping : iobroker - disabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.tado.0 : tado : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tesla-motors.0 : tesla-motors : iobroker - enabled + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.tibberlink.1 : tibberlink : iobroker - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.synology.0 : synology : iobroker - enabled, port: 5000 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.12.0 [Updatable] Adapter "alexa2" : 3.26.4 , installed 3.26.1 [Updatable] Adapter "backitup" : 2.10.11 , installed 2.8.7 [Updatable] Adapter "bydhvs" : 1.5.0 , installed 1.4.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.0.0 [Updatable] Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "fritzdect" : 2.5.9 , installed 2.3.1 [Updatable] Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "fronius-solarweb": 0.0.3 , installed 0.0.3 Adapter "fronius-wattpilot": 4.6.3, installed 4.6.2 [Updatable] Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.1.0 [Updatable] Adapter "influxdb" : 4.0.2 , installed 3.2.0 [Updatable] Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 7.1.4 [Updatable] Controller "js-controller": 5.0.19 , installed 5.0.12 [Updatable] Adapter "meross" : 1.17.0 , installed 1.15.1 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pvforecast" : 2.9.1 , installed 2.9.0 [Updatable] Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "tado" : 0.5.3 , installed 0.4.12 [Updatable] Adapter "telegram" : 3.0.1 , installed 2.0.1 [Updatable] Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "text2command" : 3.0.3 , installed 3.0.2 [Updatable] Adapter "tibberlink" : 2.2.1 , installed 1.5.0 [Updatable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.4.16 [Updatable] Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.3 , installed 6.1.10 [Updatable] Adapter "ws" : 2.5.10 , installed 2.5.8 [Updatable] Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 1.10.1 , installed 1.8.24 [Updatable] Objects and States Please stand by - This may take a while Objects: 17012 States: 14331 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:6 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1000 34749 12221/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 34355 11265/sshd: /usr/sb tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 37604 12069/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 36647 12069/iobroker.js-c tcp6 0 0 :::8082 :::* LISTEN 1000 37936 12305/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1000 35606 12094/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 34357 11265/sshd: /usr/sb udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14584 383/avahi-daemon: r udp 0 0 0.0.0.0:50776 0.0.0.0:* 108 14586 383/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13120 512/dhcpcd udp6 0 0 :::55930 :::* 108 14587 383/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14585 383/avahi-daemon: r udp6 0 0 :::546 :::* 0 14783 512/dhcpcd *** Log File - Last 25 Lines *** 2024-02-25 22:17:53.972 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:17:58.241 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:17:58.241 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:17:58.247 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:08.248 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:08.249 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:08.254 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:09.269 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:18.254 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:18.255 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:18.259 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:24.574 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:24.806 - info: shelly.0 (12221) [MQTT] Client Close: 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1) (false) 2024-02-25 22:18:26.995 - info: shelly.0 (12221) [MQTT] Device with client id "shellyplus1pm-64b7080975bc" connected! 2024-02-25 22:18:28.260 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:28.260 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:28.276 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:29.004 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:38.277 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:38.277 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:38.281 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086 2024-02-25 22:18:44.274 - warn: shelly.0 (12221) [authEnabled] 192.168.178.54 (shellyplus1pm / shellyplus1pm-64b7080975bc / shellyplus1pm#64b7080975bc#1): This device is not protected via restricted login (see adapter documentation for details) 2024-02-25 22:18:48.282 - info: influxdb.0 (12147) Connecting http://localhost:8086/ ... 2024-02-25 22:18:48.283 - info: influxdb.0 (12147) Influx DB Version used: 2.x 2024-02-25 22:18:48.296 - error: influxdb.0 (12147) Error: connect ECONNREFUSED 127.0.0.1:8086============ Mark until here for C&P =============
Hier die summery
======================= SUMMARY =======================
v.2023-10-10Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 21 Nodejs-Installation: /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.1 and npm 10.2.4 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 1.7G 791M 1.0M 1.3G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.7G 891M Active iob-Instances: 27 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: adminObjects: 17012
States: 14331Size of iob-Database:
26M /opt/iobroker/iobroker-data/objects.jsonl
7.9M /opt/iobroker/iobroker-data/states.jsonl=================== END OF SUMMARY ====================
