[gelöst] Upgrade einer vernachlässigten ioBroker Inst.
-
Moin zusammen,
mein Haupt-ioBroker läuft in einem Dockercontainer auf meinem Synology-NAS und macht keine Probleme.
Räumlich getrennt läuft eigenständig eine Miniinstallation auf einem Raspi (per USB sind ein Smartmeterlesekopf und jeelink-Adapter angeschlossen und es werden per NodeRed Daten auf eine auf dem NAS laufende InfluxDB2 geschaufelt), die ich sträflich vernachlässigt habe.
Hier die Eckdaten:
cat /etc/*release PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debianund der iobroker "sagt" unter Info:
PlatformBetriebssystem:linux Architektur:arm CPUs:4 Geschwindigkeit:900 MHz Modell:ARMv7 Processor rev 5 (v7l) RAM:922.1 MB System-Betriebszeit:03:09:24 Node.js:v16.18.0 time:1707935162944 timeOffset:-60 Adapter-Anzahl:531 NPM:8.19.2 Datenträgergröße:29.0 GB Freier Festplattenspeicher:25.9 GB Betriebszeit:03:09:17 Aktive Instanzen:11 Pfad:/opt/iobroker/ aktiv:true _nodeCurrent:16.18.0 _nodeNewest:16.20.2 _nodeNewestNext:16.20.2 _npmCurrent:8.19.2 _npmNewest:8.19.2 _npmNewestNext:8.19.4In welcher Reihenfolge mache ich dieses Update? Es scheint im Wesentlichen beim Update der Adapter das Problem zu sein, dass ich > Node.js 16.20 stehe?
Fehlen noch Infos?
Danke für eure Mühe?
-
@cocomp sagte in Upgrade einer vernachlässigten ioBroker Installation:
die ich sträflich vernachlässigt habe.
das scheint bei dir ja noch vergleichsweise harmlos zu sein.
@cocomp sagte in Upgrade einer vernachlässigten ioBroker Installation:
Fehlen noch Infos?
bitte
iob diagin der Langfassung. -
@homoran said in Upgrade einer vernachlässigten ioBroker Installatio:
iob diag
Bei
iob diagkommt bei mir nur eine Auflistung potentieller Befehle und Optionen, wie z.B.
pi@raspberrypi:~ $ iob diag iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instanceDas war bestimmt nicht gemeint, oder?
-
@cocomp sagte in Upgrade einer vernachlässigten ioBroker Installation:
Das war bestimmt nicht gemeint, oder?
Doch.
Aber du musst zuvor nochiob stop iob fix iob startdurchführen.
-
erledigt, hier das Ergebnis
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.61-v7+ Architecture: arm Model : Raspberry Pi 2 Model B Rev 1.1 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 19:54:40 up 3:38, 1 user, load average: 2.18, 1.94, 1.00 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-02-14 19:54:41 CET Universal time: Wed 2024-02-14 18:54:41 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 922M 494M 189M 0.0K 238M 419M Swap: 99M 10M 89M Total: 1.0G 505M 278M 922 M total memory 495 M used memory 132 M active memory 501 M inactive memory 188 M free memory 65 M buffer memory 172 M swap cache 99 M total swap 10 M used swap 89 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 3.1G 25G 11% / devtmpfs devtmpfs 333M 0 333M 0% /dev tmpfs tmpfs 462M 0 462M 0% /dev/shm tmpfs tmpfs 185M 948K 184M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 50M 206M 20% /boot tmpfs tmpfs 93M 0 93M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Feb 14 16:16:39 2024] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=6bc33173-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Feb 14 16:16:43 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Wed Feb 14 16:16:43 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Feb 14 16:16:47 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [Wed Feb 14 16:16:53 2024] EXT4-fs (mmcblk0p2): resizing filesystem from 1873920 to 7725184 blocks [Wed Feb 14 16:16:54 2024] EXT4-fs (mmcblk0p2): resized filesystem to 7725184 Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1014M /var/ 682M /var/log 681M /var/log/journal/21286045b254429896948513200b4631 681M /var/log/journal 139M /var/cache Archived and active journals take up 680.1M in the file system. /opt/iobroker/backups: 38M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 68M /opt/iobroker/iobroker-data/ 37M /opt/iobroker/iobroker-data/backup-objects 24M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 6.7M /opt/iobroker/iobroker-data/objects.jsonl 6.5M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.92002ca6.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.7M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.92002ca6.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A103R2XZ-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_383ea6098193eb1196abdcc77d11dc1e-if00-port0 *** NodeJS-Installation *** /home/iobroker/.diag.sh: line 277: nodejs: command not found /usr/bin/node v16.18.0 /usr/bin/npm 8.19.2 /usr/bin/npx 8.19.2 /usr/bin/corepack 0.14.1 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 16.18.0-deb-1nodesource1 Candidate: 16.20.2-deb-1nodesource1 Version table: 16.20.2-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages *** 16.18.0-deb-1nodesource1 100 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 6.2.23 javascript: "javascript" not found Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.jeelink.0 : jeelink : raspberrypi - enabled + system.adapter.loxone.0 : loxone : raspberrypi - enabled, port: 80 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi - enabled, port: 443 + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.loxone.0 : loxone : raspberrypi - enabled, port: 80 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi - enabled, port: 443 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.2.23 [Updatable] Adapter "backitup" : 2.9.8 , installed 2.6.19 [Updatable] Adapter "discovery" : 4.2.0 , installed 3.0.5 [Updatable] Adapter "influxdb" : 4.0.2 , installed 3.1.8 [Updatable] Adapter "jeelink" : 1.2.3 , installed 1.0.3 [Updatable] Controller "js-controller": 5.0.17 , installed 4.0.23 [Updatable] Adapter "loxone" : 3.0.1 , installed 3.0.1 Adapter "modbus" : 6.1.0 , installed 5.0.5 [Updatable] Adapter "node-red" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "plenticore" : 2.2.0 , installed 2.2.0 Adapter "smartmeter" : 3.4.0 , installed 3.3.4 [Updatable] Objects and States Please stand by - This may take a while Objects: 2437 States: 1741 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_16.x bullseye InRelease Reading package lists... Pending Updates: 140 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 30108 3008/node-red tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 28454 2933/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 28461 2933/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12386 474/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 28998 2951/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 10113 474/sshd: /usr/sbin udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11429 308/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12429 561/dhcpcd udp 0 0 0.0.0.0:45188 0.0.0.0:* 108 11431 308/avahi-daemon: r udp6 0 0 :::5353 :::* 108 11430 308/avahi-daemon: r udp6 0 0 :::42642 :::* 108 11432 308/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-02-14 19:57:04.613 - info: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-02-14 19:57:06.755 - info: host.raspberrypi instance system.adapter.smartmeter.0 started with pid 3456 2024-02-14 19:57:11.299 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true) 2024-02-14 19:57:11.540 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal 2024-02-14 19:57:12.091 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true) 2024-02-14 19:57:12.168 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal 2024-02-14 19:57:12.641 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true) 2024-02-14 19:57:12.706 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal 2024-02-14 19:57:13.716 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 killing pid 3456 2024-02-14 19:57:13.819 - warn: host.raspberrypi instance system.adapter.smartmeter.0 terminated due to SIGTERM 2024-02-14 19:57:13.822 - info: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code null () 2024-02-14 19:57:15.824 - info: host.raspberrypi instance system.adapter.smartmeter.0 started with pid 3469 2024-02-14 19:57:18.335 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true) 2024-02-14 19:57:18.511 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal 2024-02-14 19:57:18.698 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true) 2024-02-14 19:57:18.900 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal 2024-02-14 19:57:19.937 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 killing pid 3469 2024-02-14 19:57:20.041 - warn: host.raspberrypi instance system.adapter.smartmeter.0 terminated due to SIGTERM 2024-02-14 19:57:20.043 - info: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code null () 2024-02-14 19:57:22.064 - info: host.raspberrypi instance system.adapter.smartmeter.0 started with pid 3620 2024-02-14 19:57:30.659 - info: admin.0 (2951) ==> Connected system.user.admin from ::ffff:192.168.178.35 2024-02-14 19:57:32.839 - info: smartmeter.0 (3620) starting. Version 3.3.4 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v16.18.0, js-controller: 4.0.23 2024-02-14 19:57:36.539 - info: smartmeter.0 (3620) List of port: [{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyUSB1","manufacturer":"Silicon Labs","serialNumber":"383ea6098193eb1196abdcc77d11dc1e","pnpId":"usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_383ea6098193eb1196abdcc77d11dc1e-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyUSB0","manufacturer":"FTDI","serialNumber":"A103R2XZ","pnpId":"usb-FTDI_FT232R_USB_UART_A103R2XZ-if00-port0","vendorId":"0403","productId":"6001"}] 2024-02-14 19:57:36.560 - info: smartmeter.0 (3620) List of port: [{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyUSB1","manufacturer":"Silicon Labs","serialNumber":"383ea6098193eb1196abdcc77d11dc1e","pnpId":"usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_383ea6098193eb1196abdcc77d11dc1e-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyUSB0","manufacturer":"FTDI","serialNumber":"A103R2XZ","pnpId":"usb-FTDI_FT232R_USB_UART_A103R2XZ-if00-port0","vendorId":"0403","productId":"6001"}] 2024-02-14 19:57:39.452 - info: admin.0 (2951) <== Disconnect system.user.admin from ::ffff:192.168.178.35 ============ Mark until here for C&P ============= -
jetzt kam noch als summary:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.61-v7+ Architecture: arm Installation: native Kernel: armv7l Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 140 Pending iob updates: 9 /home/iobroker/.diag.sh: line 486: nodejs: command not found Nodejs-Installation: /usr/bin/node v16.18.0 /usr/bin/npm 8.19.2 /usr/bin/npx 8.19.2 /usr/bin/corepack 0.14.1 Recommended versions are nodejs 16.20.2 and npm 8.19.4 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 922M 487M 89M 0.0K 345M 412M Swap: 99M 10M 89M Total: 1.0G 497M 178M Active iob-Instances: 12 Active repo(s): stable ioBroker Core: js-controller 4.0.23 admin 6.2.23 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 2437 States: 1741 Size of iob-Database: 6.7M /opt/iobroker/iobroker-data/objects.jsonl 1.1M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
@cocomp sagte in Upgrade einer vernachlässigten ioBroker Installation:
iob nodejs-update sudo reboot iob update iob upgrade all iob stop iob upgrade self iob startUnd dann nochmal
iob diag -
Bei den Instanzen würde ich überlegen die zu optimieren.
discovery kann wohl komplett raus und ob 3 influxdb-Instanzen erforderlich sind würde ich auch überlegen.+ system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 -
@thomas-braun said in Upgrade einer vernachlässigten ioBroker Installation:
Bei den Instanzen würde ich überlegen die zu optimieren.
discovery kann wohl komplett raus und ob 3 influxdb-Instanzen erforderlich sind würde ich auch überlegen.+ system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086OK, die drei Influxinstanzen verweisen auf drei unterschiedliche Buckets, die brauche ich wohl...
-
da ist nach dem ersten Schritt was schiefgelaufen, scheint es....
ioBroker nodejs updater 2023-10-13 Recommended nodejs-version is: 16.20.2 Checking your installation now. Please be patient! Your current setup is: /usr/bin/node v16.18.0 /usr/bin/npm 8.19.2 /usr/bin/npx 8.19.2 /usr/bin/corepack 0.14.1 We found these nodejs versions available for installation: nodejs: Installed: 16.18.0-deb-1nodesource1 Candidate: 16.20.2-deb-1nodesource1 Version table: 16.20.2-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages *** 16.18.0-deb-1nodesource1 100 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Nothing to do - Your installation is using the correct paths. You are running nodejs v16.18.0. Do you want to install recommended version 16.20.2? Press <y> to continue or any other key to quit Trying to update your installation now. Please be patient. Waiting for ioBroker to shut down - Give me a minute... ############################################################ *** These repos are active on your system: Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Reading package lists... Done *** Installing ca-certificates, curl and gnupg, just in case they are missing. (Reading database ... 53643 files and directories currently installed.) Preparing to unpack .../curl_7.74.0-1.3+deb11u11_armhf.deb ... Unpacking curl (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u3) ... Preparing to unpack .../libcurl4_7.74.0-1.3+deb11u11_armhf.deb ... Unpacking libcurl4:armhf (7.74.0-1.3+deb11u11) over (7.74.0-1.3+deb11u3) ... Setting up libcurl4:armhf (7.74.0-1.3+deb11u11) ... Setting up curl (7.74.0-1.3+deb11u11) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u4) ... *** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main Package: nodejs Pin: origin deb.nodesource.com Pin-Priority: 1001 *** These repos are active after the adjustments: Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Get:3 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB] Get:4 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [7097 B] Fetched 19.2 kB in 2s (8129 B/s) Reading package lists... Done Installing the recommended nodejs version now! /home/iobroker/.nodejs-update.sh: line 329: [: : integer expression expected /home/iobroker/.nodejs-update.sh: line 346: [: : integer expression expected Installing the recommended nodejs version! E: Failed to fetch http://archive.raspberrypi.org/debian/pool/main/f/firmware-nonfree/firmware-libertas_20230210-5%7ebpo11%2b1%2brpt2_all.deb Error reading from server. Remote end closed connection [IP: 46.235.230.122 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? We tried our best to update or fix your nodejs. Please run iob diag again to verify. -
sudo apt update sudo apt full-upgrade -
@thomas-braun said in Upgrade einer vernachlässigten ioBroker Installation:
sudo apt update sudo apt full-upgradevor
iob update iob upgrade all iob stop iob upgrade self iob startoder danach?
-
Davor.
-
und danach
sudo rebootund dann den Block komplett nochmal?
iob nodejs-update sudo reboot iob update iob upgrade all iob stop iob upgrade self iob start -
Danach sollte ein
iob nodejs-updatevermelden, dass alles i.O. ist.
Dann kann man sich um den ioBroker kümmern. -
Scheint durchgelaufen zu sein...arbeite jetzt mal die nächsten Schritte ab.
iob update iob upgrade all iob stop iob upgrade self iob start -
So, scheint erfolgreich durchgelaufen zu sein. Nur der Smartmeter-Adapter steht auf gelb, weil er keine Verbindung zum Lesekopf zu haben scheint. War kurz auf grün und dann wieder auf gelb....
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v7+ Architecture: arm Model : Raspberry Pi 2 Model B Rev 1.1 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 21:14:18 up 23 min, 1 user, load average: 6.49, 3.85, 2.97 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-02-14 21:14:19 CET Universal time: Wed 2024-02-14 20:14:19 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 921M 514M 150M 0.0K 256M 347M Swap: 99M 17M 82M Total: 1.0G 532M 232M 921 M total memory 514 M used memory 141 M active memory 548 M inactive memory 150 M free memory 38 M buffer memory 218 M swap cache 99 M total swap 17 M used swap 82 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 3.6G 25G 13% / devtmpfs devtmpfs 333M 0 333M 0% /dev tmpfs tmpfs 461M 0 461M 0% /dev/shm tmpfs tmpfs 185M 940K 184M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 93M 0 93M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Feb 14 20:51:00 2024] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=6bc33173-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Feb 14 20:51:04 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Feb 14 20:51:04 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Feb 14 20:51:09 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.3G /var/ 707M /var/log 705M /var/log/journal/21286045b254429896948513200b4631 705M /var/log/journal 377M /var/cache Archived and active journals take up 704.1M in the file system. /opt/iobroker/backups: 38M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 99M /opt/iobroker/iobroker-data/ 46M /opt/iobroker/iobroker-data/files 37M /opt/iobroker/iobroker-data/backup-objects 31M /opt/iobroker/iobroker-data/files/modbus.admin/static/js 31M /opt/iobroker/iobroker-data/files/modbus.admin/static The five largest files in iobroker-data are: 22M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 4.7M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_383ea6098193eb1196abdcc77d11dc1e-if00-port0 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A103R2XZ-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.13.16 javascript: "javascript" not found Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.jeelink.0 : jeelink : raspberrypi - enabled + system.adapter.loxone.0 : loxone : raspberrypi - enabled, port: 80 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi - enabled, port: 443 + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.loxone.0 : loxone : raspberrypi - enabled, port: 80 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi - enabled, port: 443 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "jeelink" : 1.2.3 , installed 1.2.3 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "loxone" : 3.0.1 , installed 3.0.1 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "node-red" : 5.1.0 , installed 5.1.0 Adapter "plenticore" : 2.2.0 , installed 2.2.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Objects and States Please stand by - This may take a while Objects: 2443 States: 1742 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 18352 2444/node-red tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 18626 2382/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 18062 2382/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1861 475/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 18743 2400/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 1863 475/sshd: /usr/sbin udp 0 0 0.0.0.0:33645 0.0.0.0:* 108 597 354/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12487 533/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 595 354/avahi-daemon: r udp6 0 0 :::45120 :::* 108 598 354/avahi-daemon: r udp6 0 0 :::5353 :::* 108 596 354/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-02-14 21:14:15.898 - info: plenticore.0 (2560) Configured Wp of panel(s) is 0 2024-02-14 21:14:15.911 - info: plenticore.0 (2560) [INFO] Configured polling interval: 20000 2024-02-14 21:14:16.778 - info: loxone.0 (2503) starting. Version 3.0.1 in /opt/iobroker/node_modules/iobroker.loxone, node: v18.19.0, js-controller: 5.0.17 2024-02-14 21:14:17.749 - info: backitup.0 (2525) starting. Version 2.9.8 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.19.0, js-controller: 5.0.17 2024-02-14 21:14:18.400 - info: smartmeter.0 (2491) Received 14 values, 14 updated 2024-02-14 21:14:18.608 - info: backitup.0 (2525) [iobroker] backup will be activated at 02:40 every 1 day(s) 2024-02-14 21:14:20.229 - info: loxone.0 (2503) Trying to connect 2024-02-14 21:14:22.354 - info: loxone.0 (2503) got structure file; last modified on 2024-02-12 17:02:50 2024-02-14 21:14:22.773 - info: plenticore.0 (2560) Not enabling forecast data. 2024-02-14 21:14:22.783 - info: plenticore.0 (2560) Not enabling MinSoC forecast data. 2024-02-14 21:14:29.736 - info: loxone.0 (2503) Unsupported device control CarCharger 2024-02-14 21:14:33.278 - info: loxone.0 (2503) Unsupported device control IRoomController 2024-02-14 21:14:35.286 - info: loxone.0 (2503) Unsupported device control IRoomController 2024-02-14 21:14:37.782 - info: loxone.0 (2503) Unsupported device control IRoomController 2024-02-14 21:14:46.993 - info: loxone.0 (2503) Unsupported device control LeftRightAnalog 2024-02-14 21:14:49.187 - info: loxone.0 (2503) Unsupported device control LeftRightAnalog 2024-02-14 21:14:49.674 - info: loxone.0 (2503) Unsupported device control LeftRightAnalog 2024-02-14 21:14:59.027 - info: loxone.0 (2503) Unsupported device control IRoomController 2024-02-14 21:15:00.877 - info: loxone.0 (2503) Unsupported device control IRoomController 2024-02-14 21:15:07.012 - info: loxone.0 (2503) Unsupported device control LeftRightAnalog 2024-02-14 21:15:09.131 - info: loxone.0 (2503) Unsupported device control EFM 2024-02-14 21:15:09.810 - info: loxone.0 (2503) Unsupported device control EnergyManager2 2024-02-14 21:15:29.582 - info: loxone.0 (2503) State value to set for "loxone.0.10998e53-004d-364a-ffff145cea42a008.sceneList" has to be stringified but received type "object" 2024-02-14 21:16:21.871 - info: smartmeter.0 (2491) Error: No or too long answer from Serial Device after last request. 2024-02-14 21:16:21.875 - warn: smartmeter.0 (2491) No or too long answer from Serial Device after last request. ============ Mark until here for C&P =============und hier die Summary
======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v7+ Architecture: arm Installation: native Kernel: armv7l Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 921M 488M 135M 0.0K 298M 372M Swap: 99M 65M 34M Total: 1.0G 553M 169M Active iob-Instances: 12 Active repo(s): stable ioBroker Core: js-controller 5.0.17 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 2443 States: 1742 Size of iob-Database: 12M /opt/iobroker/iobroker-data/objects.jsonl 5.4M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Fällt dir etwas "krummes" auf?
node.js scheint jetzt auf 18.19 zu sein.
-
@cocomp schau mal beim Smartmeter Adapter nach dem Pfad zum Lesekopf ob der noch passt.
-
Merkwürdig, dass der Adapter eine Zeitlang auf "grün" steht, bevor er dann auf "gelb" wechselt.
Ich habe den Raspi jetzt mal physisch neu gestartet - und er geht wieder auf gelb...
und das sagt das Protokoll:
smartmeter.0 2024-02-14 21:32:18.164 warn No or too long answer from Serial Device after last request. smartmeter.0 2024-02-14 21:32:18.162 info Error: No or too long answer from Serial Device after last request. smartmeter.0 2024-02-14 21:30:03.148 warn No or too long answer from Serial Device after last request. smartmeter.0 2024-02-14 21:30:03.140 info Error: No or too long answer from Serial Device after last request. smartmeter.0 2024-02-14 21:28:22.511 info List of port: [{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyUSB1","manufacturer":"Silicon Labs","serialNumber":"383ea6098193eb1196abdcc77d11dc1e","pnpId":"usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_383ea6098193eb1196abdcc77d11dc1e-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyUSB0","manufacturer":"FTDI","serialNumber":"A103R2XZ","pnpId":"usb-FTDI_FT232R_USB_UART_A103R2XZ-if00-port0","vendorId":"0403","productId":"6001"}] -
@cocomp sagte in Upgrade einer vernachlässigten ioBroker Installation:
Fällt dir etwas "krummes" auf?
Nein, passt.
