Update js-Controller 3.x auf 5.x funktioniert nicht
-
@homoran ich suche gerade hier
https://forum.iobroker.net/post/1043425
ob es irgendwelche Limitierungen für v3 -> v5 gibt.
kann aber nichts auf die Schnelle finden -
So, ich habe die 4 zeilen von Homoran eingegeben.
Ich erhalte die grüne Meldung "your installation was fixed successfully".
nach der Eingabe " iob diag" erhalte ich nun eine mehrseitige Darstellung (die ich derzeit ohne SSH nicht abfotografieren will...Daher die Frage, welche Information ist wichtig für euch, um eine Fernanalyse machen zu können.
Es ist unverändert das "alte" System 3.x aktiv.
-
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
Daher die Frage, welche Information ist wichtig für euch, um eine Fernanalyse machen zu können.
ALLES!
wenn diese Ausgabe
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
eine mehrseitige Darstellung (
enthält, ist wohl sehr viel krumm
Dann mach erst dein SSH flott
-
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
Es ist unverändert das "alte" System 3.x aktiv.
Natürlich!
der fixer fixt in erster Linie nur verbogene Rechte so gut er kann -
Es werden aber nicht wirklich Fehler sondern alle Adapter und Versionsnummern angezeigt und das die "alte" Version fehlerfrei läuft.
"SSH" ist für einen Anfänger wie mich vermutlich eine noch größere Hürde, oder lässt sich das mit Anleitung einfach herstellen ?
Ich vermute, dass ich nun mit eurer Hilfe zumindest die alte Version "gefixt" habe und vielleicht sollte ich mit den richtigen befehlen von Euch erneut den gesamten Updatevorgang erneut starten...
-
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
lässt sich das mit Anleitung einfach herstellen ?
ähm, ja!
windows?
powershell öffnen
ssh user@IPeingeben
fertiguser und ip natürlich entsprechend deiner Installation
-
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
"SSH" ist für einen Anfänger wie mich vermutlich eine noch größere Hürde, oder lässt sich das mit Anleitung einfach herstellen ?
https://www.heise.de/tipps-tricks/Raspberry-Pi-SSH-einrichten-so-geht-s-4190645.html
-
@homoran
Aber meines Wissens, muss ich doch im PI auch SSH freigeben, oder ?
Ich habe unter Einstellungen im PI mal dazu etwas gefunden.. aber SSH ist nicht aktiv. -
@homoran said in Update js-Controller 3.x auf 5.x funktioniert nicht:
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
lässt sich das mit Anleitung einfach herstellen ?
ähm, ja!
windows?
powershell öffnen
ssh user@IPeingeben
fertiguser und ip natürlich entsprechend deiner Installation
geht auch in der Eingabeaufforderung ("cmd"), muss nicht powershell sein.
-
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
muss ich doch im PI auch SSH freigeben, oder ?
ja!
wenn das noch nicht ist, am tatsch screensudo raspi-configaufrufen und einstellen.Natürlich als user pi
-
@homoran
So, SSH funktioniert.Vielen Dank..
Nun wieder zum Update, damit ich wieder auf dem aktuellen Stand bin.Was soll ich nun eingeben ?
-
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
Was soll ich nun eingeben ?
iob diagDamit man mal sieht wie du da genau unterwegs bist.
-
@thomas-braun
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.63-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 22:44:41 up 4:00, 3 users, load average: 0.34, 0.22, 0.27 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-02-02 22:44:41 CET Universal time: Fri 2024-02-02 21:44:41 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 975M 5.9G 50M 1.1G 6.7G Swap: 99M 0B 99M Total: 8.0G 975M 6.0G 7898 M total memory 975 M used memory 534 M active memory 1296 M inactive memory 5866 M free memory 134 M buffer memory 922 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 9.5G 103G 9% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 8.7M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 4.0K 790M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Feb 2 18:43:58 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D3:7A:A7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=def5eda3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Feb 2 18:43:59 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Fri Feb 2 18:43:59 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Feb 2 18:44:01 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 914M /var/ 552M /var/cache 539M /var/cache/apt 480M /var/cache/apt/archives 248M /var/lib Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 101M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 148M /opt/iobroker/iobroker-data/ 69M /opt/iobroker/iobroker-data/files 59M /opt/iobroker/iobroker-data/backup-objects 16M /opt/iobroker/iobroker-data/files/javascript.admin 13M /opt/iobroker/iobroker-data/files/vis.0 The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/objects.json.bak 6.3M /opt/iobroker/iobroker-data/objects.json 4.7M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/2.7e0b7583.chunk.js.map 3.5M /opt/iobroker/iobroker-data/files/vis.0/Grundriss_final.png 3.4M /opt/iobroker/iobroker-data/files/vis.0/Parkplatz.jpg USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.0.0 /usr/bin/node v18.0.0 /usr/bin/npm 8.6.0 /usr/bin/npx 8.6.0 /usr/bin/corepack 0.10.0 nodejs: Installed: 18.0.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages *** 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: file States type: file Core adapters versions js-controller: 3.1.6 admin: 4.1.11 javascript: 4.8.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.discovery.0 : discovery - enabled system.adapter.ical.0 : ical - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png - enabled + system.adapter.influxdb.0 : influxdb - enabled, port: 8086 + system.adapter.info.0 : info - enabled + system.adapter.javascript.0 : javascript - enabled + system.adapter.knx.0 : knx - enabled, bind: 192.168.2.98 + system.adapter.linux-control.0 : linux-control - enabled + system.adapter.meldungsliste.0 : meldungsliste - enabled + system.adapter.meldungsliste.1 : meldungsliste - enabled + system.adapter.meldungsliste.10 : meldungsliste - enabled + system.adapter.meldungsliste.11 : meldungsliste - enabled + system.adapter.meldungsliste.12 : meldungsliste - enabled + system.adapter.meldungsliste.13 : meldungsliste - enabled + system.adapter.meldungsliste.2 : meldungsliste - enabled + system.adapter.meldungsliste.3 : meldungsliste - enabled + system.adapter.meldungsliste.4 : meldungsliste - enabled + system.adapter.meldungsliste.5 : meldungsliste - enabled + system.adapter.meldungsliste.6 : meldungsliste - enabled + system.adapter.meldungsliste.7 : meldungsliste - enabled + system.adapter.meldungsliste.8 : meldungsliste - enabled + system.adapter.meldungsliste.9 : meldungsliste - enabled + system.adapter.node-red.0 : node-red - enabled, port: 1880, bind: 192.168.2.98 + system.adapter.statistics.0 : statistics - enabled system.adapter.tr-064.0 : tr-064 - disabled + system.adapter.trashschedule.0 : trashschedule - enabled system.adapter.upnp.0 : upnp - disabled system.adapter.vis-bars.0 : vis-bars - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather - enabled system.adapter.vis.0 : vis - enabled + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb - enabled, port: 8086 + system.adapter.node-red.0 : node-red - enabled, port: 1880, bind: 192.168.2.98 + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest): http://download.iobroker.net/sources-dist-latest.json Active repo: Stable (default) Installed ioBroker-Instances Used repository: Stable (default) hash changed or no sources cached => force download of new sources Cannot get any information of "_repoInfo". Ignored. update done Adapter "admin" : 6.13.15 , installed 4.1.11 [Updateable] Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "ical" : 1.13.3 , installed 1.7.4 [Updateable] Adapter "icons-mfd-png" : 1.2.1 , installed 1.2.1 Adapter "influxdb" : 3.2.0 , installed 1.9.4 [Updateable] Adapter "info" : 2.0.0 , installed 1.7.10 [Updateable] Adapter "javascript" : 7.1.6 , installed 4.8.4 [Updateable] Controller "js-controller" : 5.0.17 , installed 3.1.6 [Updateable] Adapter "knx" : 2.0.24 , installed 1.0.39 [Updateable] Adapter "linux-control" : 1.1.5 , installed 1.1.2 [Updateable] Adapter "node-red" : 5.1.0 , installed 2.0.1 [Updateable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "statistics" : 2.4.0 , installed 1.0.2 [Updateable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule" : 2.3.0 , installed 1.0.3 [Updateable] Adapter "upnp" : 1.0.21 , installed 1.0.17 [Updateable] Adapter "vis" : 1.5.4 , installed 1.3.4 [Updateable] Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets" : 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2 , installed 1.2.2 Adapter "web" : 6.2.3 , installed 3.1.0 [Updateable] Objects and States Please stand by - This may take a while Objects: 3504 States: 2428 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Get:3 https://repos.influxdata.com/debian buster InRelease [7047 B] Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Err:3 https://repos.influxdata.com/debian buster InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E -
Hier der Auszug aus dem "iob diag".
ich hoffe, dass ich mit Copy und paste alles korekt gemacht habe..
Hoffe, dass hilft für Diagnose. -
Raspbian GNU/Linux 10 (buster)
Ist tot, muss durch Version 12 'Bookworm' erstetzt werden. Neuinstallation als 64Bit-Version, wenn der ioBroker später up-to-date ist und du ein Backup davon gezogen hast.
sudo rm /etc/apt/sources.list.d/infl* wget -q https://repos.influxdata.com/influxdata-archive_compat.key echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata-archive_compat.gpg > /dev/null echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list rm influxdata-archive_compat.key iob stop sudo apt update sudo apt full-upgrade sudo rebootWenn die Kiste wieder erreichbar ist nochmal ein
iob diagDiesmal aber bitte vollständig. Bis zur zweiten Kopiermarke.
-
Hier gehts weiter mit Teil, der später ergänzt wurde:
W: Some index files failed to download. They have been ignored, or old ones used instead.
E: Broken packages
Pending Updates:*** Listening Ports ***
Active Internet connections (only servers)Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 56298 4883/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 56297 4883/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 19548 545/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16869 429/cupsd tcp 0 0 192.168.2.98:1880 0.0.0.0:* LISTEN 1001 59193 5432/node-red tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 16895 437/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 58127 4901/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 61575 5493/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 19360 437/influxd tcp6 0 0 :::22 :::* LISTEN 0 19558 545/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 16868 429/cupsd udp 0 0 192.168.2.98:54637 0.0.0.0:* 1001 59054 4954/io.knx.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16932 468/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17768 509/cups-browsed udp 0 0 0.0.0.0:36572 0.0.0.0:* 108 16048 411/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16046 411/avahi-daemon: r udp6 0 0 :::33610 :::* 108 16049 411/avahi-daemon: r udp6 0 0 :::546 :::* 0 17164 468/dhcpcd udp6 0 0 :::5353 :::* 108 16047 411/avahi-daemon: r *** Log File - Last 25 Lines *** -
So, hier nun nochmal alles von den beiden Marken:
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.63-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 22:44:41 up 4:00, 3 users, load average: 0.34, 0.22, 0.27 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-02-02 22:44:41 CET Universal time: Fri 2024-02-02 21:44:41 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 975M 5.9G 50M 1.1G 6.7G Swap: 99M 0B 99M Total: 8.0G 975M 6.0G 7898 M total memory 975 M used memory 534 M active memory 1296 M inactive memory 5866 M free memory 134 M buffer memory 922 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 9.5G 103G 9% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 8.7M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 4.0K 790M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Feb 2 18:43:58 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D3:7A:A7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=def5eda3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Feb 2 18:43:59 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Fri Feb 2 18:43:59 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Feb 2 18:44:01 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 914M /var/ 552M /var/cache 539M /var/cache/apt 480M /var/cache/apt/archives 248M /var/lib Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 101M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 148M /opt/iobroker/iobroker-data/ 69M /opt/iobroker/iobroker-data/files 59M /opt/iobroker/iobroker-data/backup-objects 16M /opt/iobroker/iobroker-data/files/javascript.admin 13M /opt/iobroker/iobroker-data/files/vis.0 The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/objects.json.bak 6.3M /opt/iobroker/iobroker-data/objects.json 4.7M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/2.7e0b7583.chunk.js.map 3.5M /opt/iobroker/iobroker-data/files/vis.0/Grundriss_final.png 3.4M /opt/iobroker/iobroker-data/files/vis.0/Parkplatz.jpg USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.0.0 /usr/bin/node v18.0.0 /usr/bin/npm 8.6.0 /usr/bin/npx 8.6.0 /usr/bin/corepack 0.10.0 nodejs: Installed: 18.0.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages *** 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: file States type: file Core adapters versions js-controller: 3.1.6 admin: 4.1.11 javascript: 4.8.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.discovery.0 : discovery - enabled system.adapter.ical.0 : ical - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png - enabled + system.adapter.influxdb.0 : influxdb - enabled, port: 8086 + system.adapter.info.0 : info - enabled + system.adapter.javascript.0 : javascript - enabled + system.adapter.knx.0 : knx - enabled, bind: 192.168.2.98 + system.adapter.linux-control.0 : linux-control - enabled + system.adapter.meldungsliste.0 : meldungsliste - enabled + system.adapter.meldungsliste.1 : meldungsliste - enabled + system.adapter.meldungsliste.10 : meldungsliste - enabled + system.adapter.meldungsliste.11 : meldungsliste - enabled + system.adapter.meldungsliste.12 : meldungsliste - enabled + system.adapter.meldungsliste.13 : meldungsliste - enabled + system.adapter.meldungsliste.2 : meldungsliste - enabled + system.adapter.meldungsliste.3 : meldungsliste - enabled + system.adapter.meldungsliste.4 : meldungsliste - enabled + system.adapter.meldungsliste.5 : meldungsliste - enabled + system.adapter.meldungsliste.6 : meldungsliste - enabled + system.adapter.meldungsliste.7 : meldungsliste - enabled + system.adapter.meldungsliste.8 : meldungsliste - enabled + system.adapter.meldungsliste.9 : meldungsliste - enabled + system.adapter.node-red.0 : node-red - enabled, port: 1880, bind: 192.168.2.98 + system.adapter.statistics.0 : statistics - enabled system.adapter.tr-064.0 : tr-064 - disabled + system.adapter.trashschedule.0 : trashschedule - enabled system.adapter.upnp.0 : upnp - disabled system.adapter.vis-bars.0 : vis-bars - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather - enabled system.adapter.vis.0 : vis - enabled + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb - enabled, port: 8086 + system.adapter.node-red.0 : node-red - enabled, port: 1880, bind: 192.168.2.98 + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest): http://download.iobroker.net/sources-dist-latest.json Active repo: Stable (default) Installed ioBroker-Instances Used repository: Stable (default) hash changed or no sources cached => force download of new sources Cannot get any information of "_repoInfo". Ignored. update done Adapter "admin" : 6.13.15 , installed 4.1.11 [Updateable] Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "ical" : 1.13.3 , installed 1.7.4 [Updateable] Adapter "icons-mfd-png" : 1.2.1 , installed 1.2.1 Adapter "influxdb" : 3.2.0 , installed 1.9.4 [Updateable] Adapter "info" : 2.0.0 , installed 1.7.10 [Updateable] Adapter "javascript" : 7.1.6 , installed 4.8.4 [Updateable] Controller "js-controller" : 5.0.17 , installed 3.1.6 [Updateable] Adapter "knx" : 2.0.24 , installed 1.0.39 [Updateable] Adapter "linux-control" : 1.1.5 , installed 1.1.2 [Updateable] Adapter "node-red" : 5.1.0 , installed 2.0.1 [Updateable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "statistics" : 2.4.0 , installed 1.0.2 [Updateable] Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule" : 2.3.0 , installed 1.0.3 [Updateable] Adapter "upnp" : 1.0.21 , installed 1.0.17 [Updateable] Adapter "vis" : 1.5.4 , installed 1.3.4 [Updateable] Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets" : 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2 , installed 1.2.2 Adapter "web" : 6.2.3 , installed 3.1.0 [Updateable] Objects and States Please stand by - This may take a while Objects: 3504 States: 2428 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Get:3 https://repos.influxdata.com/debian buster InRelease [7047 B] Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Err:3 https://repos.influxdata.com/debian buster InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Fetched 7047 B in 9s (744 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. E: Broken packages Pending Updates: *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 56298 4883/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 56297 4883/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 19548 545/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16869 429/cupsd tcp 0 0 192.168.2.98:1880 0.0.0.0:* LISTEN 1001 59193 5432/node-red tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 16895 437/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 58127 4901/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 61575 5493/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 19360 437/influxd tcp6 0 0 :::22 :::* LISTEN 0 19558 545/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 16868 429/cupsd udp 0 0 192.168.2.98:54637 0.0.0.0:* 1001 59054 4954/io.knx.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16932 468/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17768 509/cups-browsed udp 0 0 0.0.0.0:36572 0.0.0.0:* 108 16048 411/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16046 411/avahi-daemon: r udp6 0 0 :::33610 :::* 108 16049 411/avahi-daemon: r udp6 0 0 :::546 :::* 0 17164 468/dhcpcd udp6 0 0 :::5353 :::* 108 16047 411/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-02-02 22:46:00.781 - info: knx.0 (4954) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13) 2024-02-02 22:46:00.781 - info: knx.0 (4954) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14) 2024-02-02 22:46:00.781 - info: knx.0 (4954) =====> STATE_TUNNELING_ACK 2024-02-02 22:46:00.783 - info: knx.0 (4954) ( 4 ) Sending Tunnel_Request ACK : 06 10 04 21 00 0a 04 4e e5 00 ChID : 78 SeqCntIN : 229 SeqCntOUT : 25 queue length : 0 2024-02-02 22:46:00.783 - info: knx.0 (4954) ( 4.b ) return to STATE_READY, processing : false 2024-02-02 22:46:00.784 - info: knx.0 (4954) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7) 2024-02-02 22:46:04.851 - info: knx.0 (4954) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK ) : 06 10 04 20 00 17 04 4e e6 00 29 00 bc c0 12 49 23 03 03 00 80 02 26 ChID: 78 2024-02-02 22:46:04.852 - info: knx.0 (4954) WRITE : mappedName : Temperatur Wasser Teich dest : 4/3/3 val: 5.5 (DPT9.001) Temperatur_Wasser_Teich 2024-02-02 22:46:04.852 - info: knx.0 (4954) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13) 2024-02-02 22:46:04.853 - info: knx.0 (4954) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14) 2024-02-02 22:46:04.853 - info: knx.0 (4954) =====> STATE_TUNNELING_ACK 2024-02-02 22:46:04.854 - info: knx.0 (4954) ( 4 ) Sending Tunnel_Request ACK : 06 10 04 21 00 0a 04 4e e6 00 ChID : 78 SeqCntIN : 230 SeqCntOUT : 25 queue length : 0 2024-02-02 22:46:04.854 - info: knx.0 (4954) ( 4.b ) return to STATE_READY, processing : false 2024-02-02 22:46:04.854 - info: knx.0 (4954) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7) 2024-02-02 22:46:06.513 - info: meldungsliste.8 (5708) state 0_userdata.0.DSL_Status_Fritzbox updated: true (ack = false) 2024-02-02 22:46:06.514 - info: meldungsliste.8 (5708) trigger:false 2024-02-02 22:46:06.514 - info: meldungsliste.8 (5708) value:true 2024-02-02 22:46:06.554 - info: knx.0 (4954) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK ) : 06 10 04 20 00 19 04 4e e7 00 29 00 bc c0 12 3c 28 04 05 00 80 42 fa 00 00 ChID: 78 2024-02-02 22:46:06.555 - info: knx.0 (4954) WRITE : mappedName : Leistung dest : 5/0/4 val: 125 (DPT14.056) Leistung 2024-02-02 22:46:06.555 - info: knx.0 (4954) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13) 2024-02-02 22:46:06.555 - info: knx.0 (4954) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14) 2024-02-02 22:46:06.556 - info: knx.0 (4954) =====> STATE_TUNNELING_ACK 2024-02-02 22:46:06.557 - info: knx.0 (4954) ( 4 ) Sending Tunnel_Request ACK : 06 10 04 21 00 0a 04 4e e7 00 ChID : 78 SeqCntIN : 231 SeqCntOUT : 25 queue length : 0 2024-02-02 22:46:06.557 - info: knx.0 (4954) ( 4.b ) return to STATE_READY, processing : false 2024-02-02 22:46:06.557 - info: knx.0 (4954) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)============ Mark until here for C&P =============
-
Und hier noch das nachfolgende Summary:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.63-v7l+ Architecture: arm Installation: native Kernel: armv7l Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: Pending iob updates: 14 Nodejs-Installation: /usr/bin/nodejs v18.0.0 /usr/bin/node v18.0.0 /usr/bin/npm 8.6.0 /usr/bin/npx 8.6.0 /usr/bin/corepack 0.10.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.9G 1.2G 5.6G 50M 1.1G 6.5G Swap: 99M 0B 99M Total: 8.0G 1.2G 5.7G Active iob-Instances: 26 Active repo: Stable (default) ioBroker Core: js-controller 3.1.6 admin 4.1.11 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: file States type: file Status admin and web instance: + system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3504 States: 2428 Size of iob-Database: 6.3M /opt/iobroker/iobroker-data/objects.json.bak 6.3M /opt/iobroker/iobroker-data/objects.json 652K /opt/iobroker/iobroker-data/states.json.bak 652K /opt/iobroker/iobroker-data/states.json =================== END OF SUMMARY ==================== -
Jetzt was ich raus.
Also verstanden, dass ich nach dem Update des iobrokers und den Adaptern.. und deren Sicherung danach auf ein moderneres Betriebssystem wechseln soll.
Was wolltest du mir mit den Auszug sudo rm /etc.... mitteilen ?
-
@frank-knx sagte in Update js-Controller 3.x auf 5.x funktioniert nicht:
Was wolltest du mir mit den Auszug sudo rm /etc.... mitteilen ?
Das ist kein Auszug, das ist das was du in dein Terminal eingeben sollst.
Am besten zeilenweise kopieren und einfügen.
