gelöst !
Ich habe den Fehler nun selbst gefunden. In der neuen Version des Adapters muss (erneut) der Datenpunkt erst angelegt werden.
Ich habe im Register "Service" den Datenpunkt ergänzt und nun läuft das "aufwecken" wieder.
Daher hier die Lösung, falls ein anderer User vor dem gleichen Problem steht.
@frank-knx said in Nach Update iobroker+Adapter Problem mit Linux-Control:
Hallo Zusammen,
mit professioneller Hilfe aus dem Forum habe ich meinen ibroker und alle Adapter meiner VIS aktualisiert.
Fast alles läuft nach dem Update unverändert weiter.
Ich habe aber ein Problem mit dem Linux-Control Adapter (aktuell verwendete Version V1.1.5).
Offenbar sind die "alten" Einstellungen in der neuen Version so nicht mehr korrekt.Ich habe den Adapter erfolgreich für folgende Funktion genutzt:
Meine VIS läuft auf einem im Schlüsselbrett integrierten Touch-Monitor. In diesem Bereich habe ich einen Bewegungsmelder in der Decke versteckt, der zunächst über KNX-Bus eine Bewegung meldet und dieses KNX-Kommando dann den "Schlafenden" Monitor aufweckt.
Dadurch ist der Monitor nicht ständig an und man muss diesen auch nicht mit dem Finger antippen und ständig verschmutzen. Die Funktion hat zuverlässig über den Linux-Control-Adapter funktioniert.
Nach dem Update läuft die Funktion nicht mehr und Ursache ist ein Problem im Linux-Adapter, der zur Abschaltung des Adapters führt.Könnt Ihr mir bitte helfen, was sich geändert haben könnte und was aus heutiger Sicht fehlerhaft eingestellt (von der alten Version übernommen) wurde.
Vielen Dank und beste Grüße FRANK
Hier das Protokoll nach dem Neustart des Adapters mit den zugehörigen Meldungen:
linux-control.0 2024-02-07 21:48:26.580 error The pattern "io.linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.stop" is not a valid ID pattern linux-control.0 2024-02-07 21:48:26.579 error Error: The pattern "io.linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.stop" is not a valid ID pattern at Object.pattern2RegEx (/opt/iobroker/node_modules/@iobroker/js-controller-common/src/lib/common/tools.ts:2470:15) at StateRedisClient.subscribe (/opt/iobroker/node_modules/@iobroker/db-states-redis/src/lib/states/statesInRedisClient.ts:1108:27) at processTicksAndRejections (node:internal/process/task_queues:95:5) linux-control.0 2024-02-07 21:48:26.364 error unhandled promise rejection: The pattern "io.linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.stop" is not a valid ID pattern linux-control.0 2024-02-07 21:48:26.363 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). linux-control.0 2024-02-07 21:48:26.237 error Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.start" is not a valid ID pattern linux-control.0 2024-02-07 21:48:26.237 error ReplyError: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.start" is not a valid ID pattern at parseError (/opt/iobroker/node_modules/redis-parser/lib/parser.js:179:12) at parseType (/opt/iobroker/node_modules/redis-parser/lib/parser.js:302:14) linux-control.0 2024-02-07 21:48:26.236 error unhandled promise rejection: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.start" is not a valid ID pattern linux-control.0 2024-02-07 21:48:26.234 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). linux-control.0 2024-02-07 21:48:26.223 warn Terminated (UNCAUGHT_EXCEPTION): Without reason linux-control.0 2024-02-07 21:48:26.222 info terminating linux-control.0 2024-02-07 21:48:26.220 info cleaned everything up... linux-control.0 2024-02-07 21:48:26.195 error Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.restart" is not a valid ID pattern linux-control.0 2024-02-07 21:48:26.195 error ReplyError: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.restart" is not a valid ID pattern at parseError (/opt/iobroker/node_modules/redis-parser/lib/parser.js:179:12) at parseType (/opt/iobroker/node_modules/redis-parser/lib/parser.js:302:14) linux-control.0 2024-02-07 21:48:26.189 error unhandled promise rejection: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.restart" is not a valid ID pattern linux-control.0 2024-02-07 21:48:26.189 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). linux-control.0 2024-02-07 21:48:23.702 info getting data from PI4 (192.168.2.98:22, Adapter start) linux-control.0 2024-02-07 21:48:23.684 warn This object will not be created in future versions. Please report this to the developer. linux-control.0 2024-02-07 21:48:23.683 warn Object linux-control.0.command.host is invalid: obj.common.states has an invalid type! Expected "object", received "string" linux-control.0 2024-02-07 21:48:23.628 info starting. Version 1.1.5 in /opt/iobroker/node_modules/iobroker.linux-control, node: v18.19.0, js-controller: 5.0.17 linux-control.0 2024-02-07 21:48:23.614 warn This object will not be created in future versions. Please report this to the developer. linux-control.0 2024-02-07 21:48:23.611 warn Object linux-control.0.command.host is invalid: obj.common.states has an invalid type! Expected "object", received "string"Hier noch die Einstellungen, die der Adapter von der älteren Version direkt übernommen hat. Siehe linux control_1
Und hier noch der Reiter im Adapter "meine Befehle": siehe Linux-Control_2
Und der Vollständigkeit halber auch noch das Skript zur Verknüpfung des KNX-Befehls und zum Aufwecken des Monitors.
Vielen Dank im Voraus für eure Mithilfe, damit mein Monitor wieder "aufwacht".
Hier auch noch der Ausdruck des Registers "Datenpunkte". Hier habe ich nichts verändert.
siehe linux-control_3
Hallo Zusammen,
mit professioneller Hilfe aus dem Forum habe ich meinen ibroker und alle Adapter meiner VIS aktualisiert.
Fast alles läuft nach dem Update unverändert weiter.
Ich habe aber ein Problem mit dem Linux-Control Adapter (aktuell verwendete Version V1.1.5).
Offenbar sind die "alten" Einstellungen in der neuen Version so nicht mehr korrekt.
Ich habe den Adapter erfolgreich für folgende Funktion genutzt:
Meine VIS läuft auf einem im Schlüsselbrett integrierten Touch-Monitor. In diesem Bereich habe ich einen Bewegungsmelder in der Decke versteckt, der zunächst über KNX-Bus eine Bewegung meldet und dieses KNX-Kommando dann den "Schlafenden" Monitor aufweckt.
Dadurch ist der Monitor nicht ständig an und man muss diesen auch nicht mit dem Finger antippen und ständig verschmutzen. Die Funktion hat zuverlässig über den Linux-Control-Adapter funktioniert.
Nach dem Update läuft die Funktion nicht mehr und Ursache ist ein Problem im Linux-Adapter, der zur Abschaltung des Adapters führt.
Könnt Ihr mir bitte helfen, was sich geändert haben könnte und was aus heutiger Sicht fehlerhaft eingestellt (von der alten Version übernommen) wurde.
Vielen Dank und beste Grüße FRANK
Hier das Protokoll nach dem Neustart des Adapters mit den zugehörigen Meldungen:
linux-control.0
2024-02-07 21:48:26.580 error The pattern "io.linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.stop" is not a valid ID pattern
linux-control.0
2024-02-07 21:48:26.579 error Error: The pattern "io.linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.stop" is not a valid ID pattern at Object.pattern2RegEx (/opt/iobroker/node_modules/@iobroker/js-controller-common/src/lib/common/tools.ts:2470:15) at StateRedisClient.subscribe (/opt/iobroker/node_modules/@iobroker/db-states-redis/src/lib/states/statesInRedisClient.ts:1108:27) at processTicksAndRejections (node:internal/process/task_queues:95:5)
linux-control.0
2024-02-07 21:48:26.364 error unhandled promise rejection: The pattern "io.linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.stop" is not a valid ID pattern
linux-control.0
2024-02-07 21:48:26.363 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
linux-control.0
2024-02-07 21:48:26.237 error Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.start" is not a valid ID pattern
linux-control.0
2024-02-07 21:48:26.237 error ReplyError: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.start" is not a valid ID pattern at parseError (/opt/iobroker/node_modules/redis-parser/lib/parser.js:179:12) at parseType (/opt/iobroker/node_modules/redis-parser/lib/parser.js:302:14)
linux-control.0
2024-02-07 21:48:26.236 error unhandled promise rejection: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.start" is not a valid ID pattern
linux-control.0
2024-02-07 21:48:26.234 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
linux-control.0
2024-02-07 21:48:26.223 warn Terminated (UNCAUGHT_EXCEPTION): Without reason
linux-control.0
2024-02-07 21:48:26.222 info terminating
linux-control.0
2024-02-07 21:48:26.220 info cleaned everything up...
linux-control.0
2024-02-07 21:48:26.195 error Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.restart" is not a valid ID pattern
linux-control.0
2024-02-07 21:48:26.195 error ReplyError: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.restart" is not a valid ID pattern at parseError (/opt/iobroker/node_modules/redis-parser/lib/parser.js:179:12) at parseType (/opt/iobroker/node_modules/redis-parser/lib/parser.js:302:14)
linux-control.0
2024-02-07 21:48:26.189 error unhandled promise rejection: Error The pattern "linux-control.0.PI4.services.systemd-fsck@dev-disk-by\x2dpartuuid-def5eda3\x2d01.restart" is not a valid ID pattern
linux-control.0
2024-02-07 21:48:26.189 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
linux-control.0
2024-02-07 21:48:23.702 info getting data from PI4 (192.168.2.98:22, Adapter start)
linux-control.0
2024-02-07 21:48:23.684 warn This object will not be created in future versions. Please report this to the developer.
linux-control.0
2024-02-07 21:48:23.683 warn Object linux-control.0.command.host is invalid: obj.common.states has an invalid type! Expected "object", received "string"
linux-control.0
2024-02-07 21:48:23.628 info starting. Version 1.1.5 in /opt/iobroker/node_modules/iobroker.linux-control, node: v18.19.0, js-controller: 5.0.17
linux-control.0
2024-02-07 21:48:23.614 warn This object will not be created in future versions. Please report this to the developer.
linux-control.0
2024-02-07 21:48:23.611 warn Object linux-control.0.command.host is invalid: obj.common.states has an invalid type! Expected "object", received "string"
Hier noch die Einstellungen, die der Adapter von der älteren Version direkt übernommen hat. Siehe linux control_1
Und hier noch der Reiter im Adapter "meine Befehle": siehe Linux-Control_2
Und der Vollständigkeit halber auch noch das Skript zur Verknüpfung des KNX-Befehls und zum Aufwecken des Monitors.
Vielen Dank im Voraus für eure Mithilfe, damit mein Monitor wieder "aufwacht".
Hallo Thomas,
herzlichen Dank für deine professionelle Unterstützung.
Jetzt muss ich in meiner VIS nur noch schauen, ob durch die Updates am Verhalten eine Änderung aufgetreten ist.
Diesen Adapter Meldungsliste nutze ich in der VIS für alle Beleuchtungen und Co, die ich über KNX abgreife. Damit generiere ich auf der Hauptseite dann Meldungen, wie "Licht im Haus an", wenn eines der Lichter an ist oder "Fenster offen". Ich habe dort so viele Gruppen, dass ich jedes Mal einen Adapter benötige. Die laufen aber "bisher" sehr stabil und zuverlässig.
Jetzt werde ich das System nochmal genau anschauen, ob alle bisherigen Funktionen laufen und dann werde ich das nächste Projekt mit dem von dir angesprochenen Update in Angriff nehmen.
Da werde ich sicher nochmal auf euch Fachleute aus dem Forum zurückkommen, bevor ich als "Halbwissender" hier falsche Dinge mache und am Ende nichts mehr läuft.
Besten Dank
FRANK
Alle Befehle sind erfolgreich und ohne Fehlermeldung durchgelaufen.
Im iobroker selbst unter Info erscheint die Meldung, dass alle Adapter aktuell sind.
ich habe "iob diag" nochmal gestartet und nachfolgend der Report.
Habe ich es nun mit deiner Hilfe erfolgreich geschafft oder ist noch etwas zu fixen ?
Skript v.2023-10-10
*** BASE SYSTEM ***
Static hostname: raspberrypi
Icon name: computer
Operating System: Raspbian GNU/Linux 10 (buster)
Kernel: Linux 5.10.103-v7l+
Architecture: arm
Model : Raspberry Pi 4 Model B Rev 1.4
Docker : false
Virtualization : none
Kernel : armv7l
Userland : armhf
Systemuptime and Load:
17:40:21 up 16:57, 3 users, load average: 0.81, 1.75, 1.33
CPU threads: 4
*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.
Previously detected issues:
No throttling issues detected.
*** Time and Time Zones ***
Local time: Sat 2024-02-03 17:40:21 CET
Universal time: Sat 2024-02-03 16:40:21 UTC
RTC time: n/a
Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no
*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker
*** X-Server-Setup ***
X-Server: true
Desktop:
Terminal: tty
Boot Target: graphical.target
*** MEMORY ***
total used free shared buff/cache available
Mem: 7.9G 1.2G 4.9G 39M 1.7G 6.5G
Swap: 99M 0B 99M
Total: 8.0G 1.2G 5.0G
7898 M total memory
1209 M used memory
531 M active memory
2209 M inactive memory
4942 M free memory
158 M buffer memory
1589 M swap cache
99 M total swap
0 M used swap
99 M free swap
Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms
*** FAILED SERVICES ***
UNIT LOAD ACTIVE SUB DESCRIPTION
* bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 117G 11G 102G 10% /
devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 3.9G 8.7M 3.9G 1% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot
tmpfs tmpfs 790M 4.0K 790M 1% /run/user/1000
Messages concerning ext4 filesystem in dmesg:
[Sat Feb 3 00:42:27 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:D3:7A:A7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=def5eda3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Sat Feb 3 00:42:28 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Feb 3 00:42:28 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Feb 3 00:42:31 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Show mounted filesystems \(real ones only\):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
|-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700
|-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
`-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
Files in neuralgic directories:
/var:
1.5G /var/
1.1G /var/cache/apt/archives
1.1G /var/cache/apt
1.1G /var/cache
250M /var/lib
Archived and active journals take up 8.0M in the file system.
/opt/iobroker/backups:
101M /opt/iobroker/backups/
/opt/iobroker/iobroker-data:
256M /opt/iobroker/iobroker-data/
169M /opt/iobroker/iobroker-data/files
67M /opt/iobroker/iobroker-data/files/javascript.admin
50M /opt/iobroker/iobroker-data/backup-objects
48M /opt/iobroker/iobroker-data/files/javascript.admin/static
The five largest files in iobroker-data are:
22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
16M /opt/iobroker/iobroker-data/objects.jsonl
8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js
7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map
7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':
find: '/dev/serial/by-id/': No such file or directory
*** NodeJS-Installation ***
/usr/bin/nodejs v18.19.0
/usr/bin/node v18.19.0
/usr/bin/npm 10.2.3
/usr/bin/npx 10.2.3
/usr/bin/corepack 0.22.0
nodejs:
Installed: 18.19.0-1nodesource1
Candidate: 18.19.0-1nodesource1
Version table:
*** 18.19.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
100 /var/lib/dpkg/status
18.18.2-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.18.1-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.18.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.17.1-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.17.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.16.1-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.16.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.15.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.14.2-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.14.1-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.14.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.13.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.12.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.11.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.10.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.9.1-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.9.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.8.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.7.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.6.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.5.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.4.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.3.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.2.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.1.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
18.0.0-1nodesource1 1001
500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
10.24.0~dfsg-1~deb10u3 500
500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
Temp directories causing npm8 problem: 0
No problems detected
Errors in npm tree:
*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.
Objects type: jsonl
States type: jsonl
Core adapters versions
js-controller: 5.0.17
admin: 6.13.15
javascript: 7.1.6
Adapters from github: 0
Adapter State
+ system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0 : backitup : raspberrypi - enabled
+ system.adapter.discovery.0 : discovery : raspberrypi - enabled
system.adapter.ical.0 : ical : raspberrypi - enabled
system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - enabled
+ system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086
+ system.adapter.info.0 : info : raspberrypi - enabled
+ system.adapter.javascript.0 : javascript : raspberrypi - enabled
+ system.adapter.knx.0 : knx : raspberrypi - enabled, bind: 192.168.2.98
system.adapter.linux-control.0 : linux-control : raspberrypi - enabled
+ system.adapter.meldungsliste.0 : meldungsliste : raspberrypi - enabled
system.adapter.meldungsliste.1 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.10 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.11 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.12 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.13 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.2 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.3 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.4 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.5 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.6 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.7 : meldungsliste : raspberrypi - enabled
system.adapter.meldungsliste.8 : meldungsliste : raspberrypi - enabled
+ system.adapter.meldungsliste.9 : meldungsliste : raspberrypi - enabled
+ system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 192.168.2.98
+ system.adapter.statistics.0 : statistics : raspberrypi - enabled
system.adapter.tr-064.0 : tr-064 : raspberrypi - disabled
+ system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled
system.adapter.upnp.0 : upnp : raspberrypi - disabled
system.adapter.vis-bars.0 : vis-bars : raspberrypi - enabled
system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled
system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - enabled
system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled
system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled
system.adapter.vis.0 : vis : raspberrypi - enabled
+ system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ instance is alive
Enabled adapters with bindings
+ system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086
+ system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 192.168.2.98
+ system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin
ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json
Active repo(s): Stable (default)
Installed ioBroker-Instances
Used repository: Stable (default)
Adapter "admin" : 6.13.15 , installed 6.13.15
Adapter "backitup" : 2.9.8 , installed 2.9.8
Adapter "discovery" : 4.2.0 , installed 4.2.0
Adapter "ical" : 1.13.3 , installed 1.13.3
Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1
Adapter "influxdb" : 3.2.0 , installed 3.2.0
Adapter "info" : 2.0.0 , installed 2.0.0
Adapter "javascript" : 7.1.6 , installed 7.1.6
Controller "js-controller": 5.0.17 , installed 5.0.17
Adapter "knx" : 2.0.24 , installed 2.0.24
Adapter "linux-control": 1.1.5 , installed 1.1.5
Adapter "node-red" : 5.1.0 , installed 5.1.0
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "socketio" : 6.6.0 , installed 6.6.0
Adapter "statistics" : 2.4.0 , installed 2.4.0
Adapter "tr-064" : 4.2.18 , installed 4.2.18
Adapter "trashschedule": 2.3.0 , installed 2.3.0
Adapter "upnp" : 1.0.21 , installed 1.0.21
Adapter "vis" : 1.5.4 , installed 1.5.4
Adapter "vis-bars" : 0.1.4 , installed 0.1.4
Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3
Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0
Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter "web" : 6.2.3 , installed 6.2.3
Adapter "ws" : 2.5.10 , installed 2.5.10
Objects and States
Please stand by - This may take a while
Objects: 3877
States: 2729
*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 https://repos.influxdata.com/debian stable InRelease
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 1
*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17021 555/sshd
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 17841 420/cupsd
tcp 0 0 192.168.2.98:1880 0.0.0.0:* LISTEN 1001 49471 9582/node-red
tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 19766 482/influxd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 48023 9500/iobroker.js-co
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 48016 9500/iobroker.js-co
tcp6 0 0 :::8081 :::* LISTEN 1001 48066 9521/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 53319 9865/io.web.0
tcp6 0 0 :::8086 :::* LISTEN 999 20061 482/influxd
tcp6 0 0 :::22 :::* LISTEN 0 17031 555/sshd
tcp6 0 0 ::1:631 :::* LISTEN 0 17840 420/cupsd
udp 0 0 0.0.0.0:68 0.0.0.0:* 0 17159 484/dhcpcd
udp 0 0 0.0.0.0:631 0.0.0.0:* 0 18593 532/cups-browsed
udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16137 413/avahi-daemon: r
udp 0 0 0.0.0.0:59135 0.0.0.0:* 1001 49473 9582/node-red
udp 0 0 0.0.0.0:42781 0.0.0.0:* 108 16139 413/avahi-daemon: r
udp 0 0 192.168.2.98:39748 0.0.0.0:* 1001 53569 10234/io.knx.0
udp 0 0 192.168.2.98:46929 0.0.0.0:* 1001 51070 10234/io.knx.0
udp6 0 0 :::546 :::* 0 20302 484/dhcpcd
udp6 0 0 :::52887 :::* 108 16140 413/avahi-daemon: r
udp6 0 0 :::5353 :::* 108 16138 413/avahi-daemon: r
*** Log File - Last 25 Lines ***
2024-02-03 17:41:57.874 - info: knx.0 (10234) WRITE : mappedName : Temperatur Wasser Teich dest : 4/3/3 val: 6.4 (DPT9.001) Temperatur_Wasser_Teich
2024-02-03 17:41:57.874 - info: knx.0 (10234) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2024-02-03 17:41:57.875 - info: knx.0 (10234) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2024-02-03 17:41:57.875 - info: knx.0 (10234) =====> STATE_TUNNELING_ACK
2024-02-03 17:41:57.876 - info: knx.0 (10234) ( 4 ) Sending Tunnel_Request ACK : 06 10 04 21 00 0a 04 55 87 00 ChID : 85 SeqCntIN : 135 SeqCntOUT : 25 queue length : 0
2024-02-03 17:41:57.877 - info: knx.0 (10234) ( 4.b ) return to STATE_READY, processing : false
2024-02-03 17:41:57.877 - info: knx.0 (10234) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
2024-02-03 17:41:56.303 - info: influxdb.0 (9607) Influx DB Version used: 1.x
2024-02-03 17:41:56.503 - error: influxdb.0 (9607) Error: authorization failed
2024-02-03 17:41:58.728 - info: knx.0 (10234) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK ) : 06 10 04 20 00 19 04 55 88 00 29 00 bc c0 12 3c 28 03 05 00 80 00 00 01 c4 ChID: 85
2024-02-03 17:41:58.729 - info: knx.0 (10234) WRITE : mappedName : Energie kWh dest : 5/0/3 val: 452 (DPT13.013) Energie_kWh
2024-02-03 17:41:58.730 - info: knx.0 (10234) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2024-02-03 17:41:58.730 - info: knx.0 (10234) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2024-02-03 17:41:58.731 - info: knx.0 (10234) =====> STATE_TUNNELING_ACK
2024-02-03 17:41:58.733 - info: knx.0 (10234) ( 4 ) Sending Tunnel_Request ACK : 06 10 04 21 00 0a 04 55 88 00 ChID : 85 SeqCntIN : 136 SeqCntOUT : 25 queue length : 0
2024-02-03 17:41:58.733 - info: knx.0 (10234) ( 4.b ) return to STATE_READY, processing : false
2024-02-03 17:41:58.733 - info: knx.0 (10234) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
2024-02-03 17:41:58.751 - info: knx.0 (10234) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK ) : 06 10 04 20 00 19 04 55 89 00 29 00 bc c0 12 3c 28 02 05 00 80 00 06 e9 02 ChID: 85
2024-02-03 17:41:58.753 - info: knx.0 (10234) WRITE : mappedName : Energie Wh dest : 5/0/2 val: 452866 (DPT13.010) Energie_Wh
2024-02-03 17:41:58.754 - info: knx.0 (10234) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2024-02-03 17:41:58.754 - info: knx.0 (10234) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2024-02-03 17:41:58.755 - info: knx.0 (10234) =====> STATE_TUNNELING_ACK
2024-02-03 17:41:58.756 - info: knx.0 (10234) ( 4 ) Sending Tunnel_Request ACK : 06 10 04 21 00 0a 04 55 89 00 ChID : 85 SeqCntIN : 137 SeqCntOUT : 25 queue length : 0
2024-02-03 17:41:58.756 - info: knx.0 (10234) ( 4.b ) return to STATE_READY, processing : false
2024-02-03 17:41:58.757 - info: knx.0 (10234) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
@thomas-braun
OK ich halte mich bereit und mache vor deiner Rückmeldung keine Aktionen (um nichts zu Verschlimmern).
Muss noch ergänzen..
Nachfolgend upgrade...
Alles nicht instalierten Adapter werden angezeigt.. aber die installierten meldet er, als nicht upgedated, weil die JS-Controller Version ja bekanntlich zu alt ist => Das will ich ja gerade ändern...
pi@raspberrypi:~ $ iob upgrade
Adapter "accuweather" is not installed.
Adapter "acme" is not installed.
Adapter "adb" is not installed.
Adapter "adguard" is not installed.
Invalid version of "js-controller". Installed "3.1.6", required ">=3.3.22
Adapter "aio" is not installed.
Adapter "airconwithme" is not installed.
Adapter "airzone" is not installed.
Adapter "alarm" is not installed.
Adapter "alexa-shoppinglist" is not installed.
Adapter "alexa-timer-vis" is not installed.
Adapter "alexa2" is not installed.
Adapter "alias-manager" is not installed.
Adapter "alpha-ess" is not installed.
Adapter "alpha2" is not installed.
Adapter "amazon-dash" is not installed.
Adapter "amtronwallbox" is not installed.
Adapter "anelhut" is not installed.
Adapter "apcups" is not installed.
Adapter "apg-info" is not installed.
Adapter "artnet" is not installed.
Adapter "artnet-recorder" is not installed.
Adapter "asterisk" is not installed.
Adapter "asuswrt" is not installed.
Adapter "atlas-scientific-ezo-i2c" is not installed.
Adapter "awattar" is not installed.
Adapter "awtrix-light" is not installed.
Adapter "b-control-em" is not installed.
Invalid version of "js-controller". Installed "3.1.6", required ">=4.0.0
Adapter "beckhoff" is not installed.
Adapter "benchmark" is not installed.
Adapter "benq" is not installed.
Adapter "bestway" is not installed.
Adapter "bidirectional-counter" is not installed.
Adapter "birthdays" is not installed.
Adapter "ble" is not installed.
Adapter "blebox" is not installed.
Adapter "bluelink" is not installed.
Adapter "bmw" is not installed.
Adapter "bosch-ebike" is not installed.
Adapter "bosesoundtouch" is not installed.
Adapter "botslab360" is not installed.
Adapter "botvac" is not installed.
Adapter "bring" is not installed.
Adapter "broadlink2" is not installed.
Adapter "bsblan" is not installed.
Adapter "bshb" is not installed.
Adapter "bwt" is not installed.
Adapter "bydbatt" is not installed.
Adapter "bydhvs" is not installed.
Adapter "canbus" is not installed.
Adapter "cec2" is not installed.
Adapter "chromecast" is not installed.
Adapter "cleveron" is not installed.
Adapter "cloud" is not installed.
Adapter "cloudflare" is not installed.
Adapter "comfoair" is not installed.
Adapter "contactid" is not installed.
Adapter "coronavirus-statistics" is not installed.
Adapter "countdown" is not installed.
Adapter "cul" is not installed.
Adapter "daikin" is not installed.
Adapter "daikin-cloud" is not installed.
Adapter "daswetter" is not installed.
Adapter "deconz" is not installed.
Adapter "denon" is not installed.
Adapter "device-reminder" is not installed.
Adapter "device-watcher" is not installed.
Adapter "devices" is not installed.
Adapter "deyeidc" is not installed.
Adapter "digitalstrom" is not installed.
Adapter "discord" is not installed.
Adapter "discovergy" is not installed.
Adapter "discovery" is up to date.
Adapter "divera247" is not installed.
Adapter "doorbird" is not installed.
Adapter "doorio" is not installed.
Adapter "drag-indicator" is not installed.
Adapter "ds18b20" is not installed.
Adapter "dwd" is not installed.
Adapter "dysonairpurifier" is not installed.
Adapter "e3dc-rscp" is not installed.
Adapter "easee" is not installed.
Adapter "ebus" is not installed.
Adapter "echarts" is not installed.
Adapter "ecovacs-deebot" is not installed.
Adapter "egigeozone" is not installed.
Adapter "ekey" is not installed.
Adapter "elero-usb-transmitter" is not installed.
Adapter "email" is not installed.
Adapter "emby" is not installed.
Adapter "emporia" is not installed.
Adapter "ems-esp" is not installed.
Adapter "energiefluss" is not installed.
Adapter "energymanager" is not installed.
Adapter "enet" is not installed.
Adapter "enigma2" is not installed.
Adapter "envertech-pv" is not installed.
Adapter "epson_ecotank_et_2750" is not installed.
Adapter "epson_stylus_px830" is not installed.
Adapter "eusec" is not installed.
Adapter "evcc" is not installed.
Adapter "eventlist" is not installed.
Adapter "exchangerates" is not installed.
Adapter "fahrplan" is not installed.
Adapter "fakeroku" is not installed.
Adapter "fb-checkpresence" is not installed.
Adapter "feiertage" is not installed.
Adapter "fhem" is not installed.
Adapter "fiat" is not installed.
Adapter "firetv" is not installed.
Adapter "fitbit-fitness" is not installed.
Adapter "flot" is not installed.
Adapter "followthesun" is not installed.
Adapter "foobar2000" is not installed.
Adapter "ford" is not installed.
Adapter "frigate" is not installed.
Adapter "fritzbox" is not installed.
Adapter "fritzdect" is not installed.
Adapter "froeling" is not installed.
Adapter "fronius" is not installed.
Adapter "fronius-solarweb" is not installed.
Adapter "fronius-wattpilot" is not installed.
Adapter "frontier_silicon" is not installed.
Adapter "fuelpricemonitor" is not installed.
Adapter "fullcalendar" is not installed.
Adapter "fullybrowser" is not installed.
Adapter "g-homa" is not installed.
Adapter "garmin" is not installed.
Adapter "geofency" is not installed.
Adapter "gigaset-elements" is not installed.
Adapter "gira-iot" is not installed.
Adapter "go-e" is not installed.
Adapter "govee-local" is not installed.
Adapter "growatt" is not installed.
Adapter "gruenbeck" is not installed.
Adapter "gsmsms" is not installed.
Adapter "haassohn" is not installed.
Adapter "habpanel" is not installed.
Adapter "haier" is not installed.
Adapter "ham" is not installed.
Adapter "ham-wemo" is not installed.
Adapter "harmony" is not installed.
Adapter "hass" is not installed.
Adapter "hausbus_de" is not installed.
Adapter "heatingcontrol" is not installed.
Adapter "heizoel" is not installed.
Adapter "heizungssteuerung" is not installed.
Adapter "hekr" is not installed.
Adapter "helios" is not installed.
Adapter "heos" is not installed.
Adapter "heytech" is not installed.
Adapter "hid-community" is not installed.
Adapter "hikvision-alarmserver" is not installed.
Adapter "history" is not installed.
Adapter "hm-rega" is not installed.
Adapter "hm-rpc" is not installed.
Adapter "hmip" is not installed.
Adapter "homeconnect" is not installed.
Adapter "homee" is not installed.
Adapter "homekit-controller" is not installed.
Adapter "homenet" is not installed.
Adapter "homepilot" is not installed.
Adapter "hoover" is not installed.
Adapter "hp-ilo" is not installed.
Adapter "hs100" is not installed.
Adapter "hue" is not installed.
Adapter "huum-sauna" is not installed.
Adapter "i2c" is not installed.
Invalid version of "admin". Installed "4.1.11", required ">=5.3.2
Adapter "iceroad" is not installed.
Adapter "ico-cloud" is not installed.
Adapter "icons-addictive-flavour-png" is not installed.
Adapter "icons-eclipse-smarthome-classic" is not installed.
Adapter "icons-fatcow-hosting" is not installed.
Adapter "icons-freepic" is not installed.
Adapter "icons-icons8" is not installed.
Adapter "icons-material-png" is not installed.
Adapter "icons-material-svg" is not installed.
Adapter "icons-mfd-png" is up to date.
Adapter "icons-mfd-svg" is not installed.
Adapter "icons-open-icon-library-png" is not installed.
Adapter "icons-smarthome" is not installed.
Adapter "icons-ultimate-png" is not installed.
Adapter "ikettle2" is not installed.
Adapter "imap" is not installed.
Adapter "imow" is not installed.
Invalid version of "js-controller". Installed "3.1.6", required ">=3.3.0
Update info from @1.7.10 to @2.0.0
NPM version: 10.2.3
npm install iobroker.info@2.0.0 --loglevel error --prefix "/opt/iobroker" (System call)
Adapter "system.adapter.vis.0" restarted.
Update "system.adapter.info.0"
upload [90] info.admin /opt/iobroker/node_modules/iobroker.info/admin/tab_m.html tab_m.html text/html
upload [80] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/helper.js lib/js/helper.js application/javascript
upload [70] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/bootbox.min.js lib/js/bootbox.min.js application/javascript
upload [60] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/redhat.png lib/img/logos/redhat.png image/png
upload [50] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/mandriva.png lib/img/logos/mandriva.png image/png
upload [40] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/centos.png lib/img/logos/centos.png image/png
upload [30] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/icons/graphics.png lib/img/icons/graphics.png image/png
upload [20] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/clock/clockface.png lib/img/clock/clockface.png image/png
upload [19] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/fonts/fontawesome-webfont.svg lib/fonts/fontawesome-webfont.svg image/svg+xml
upload [18] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/data/infoData.json lib/data/infoData.json application/json
upload [17] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/simplemde.min.css lib/css/simplemde.min.css text/css
upload [16] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/info.css lib/css/info.css text/css
upload [15] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/font-awesome.min.css lib/css/font-awesome.min.css text/css
upload [14] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/chartist.min.css lib/css/chartist.min.css text/css
upload [13] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/bootstrap.min.css lib/css/bootstrap.min.css text/css
upload [12] info.admin /opt/iobroker/node_modules/iobroker.info/admin/info.png info.png image/png
upload [11] info.admin /opt/iobroker/node_modules/iobroker.info/admin/index_m.html index_m.html text/html
upload [10] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [9] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [8] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [7] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [6] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [5] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [4] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [3] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [2] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [1] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [0] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/de/translations.json i18n/de/translations.json application/json
Adapter "info" updated
Adapter "innogy-smarthome" is not installed.
Adapter "innoxel" is not installed.
Adapter "intex" is not installed.
Adapter "iot" is not installed.
Adapter "iqontrol" is not installed.
Adapter "iwg-vpn" is not installed.
Adapter "janitza-gridvis" is not installed.
Adapter "jarvis" is not installed.
Invalid version of "admin". Installed "4.1.11", required ">=5.1.28
Adapter "jeelink" is not installed.
Adapter "judoisoft" is not installed.
Adapter "kecontact" is not installed.
Adapter "klf200" is not installed.
Adapter "knmi-weather" is not installed.
Invalid version of "admin". Installed "4.1.11", required ">=5.1.28
Adapter "kodi" is not installed.
Adapter "kostal-piko-ba" is not installed.
Adapter "lametric" is not installed.
Adapter "lcn" is not installed.
Adapter "legrand-ecocompteur" is not installed.
Adapter "letrika_comgw" is not installed.
Adapter "lg-ess-home" is not installed.
Adapter "lg-thinq" is not installed.
Adapter "lgtv" is not installed.
Adapter "lgtv-rs" is not installed.
Adapter "lgtv11" is not installed.
Adapter "libre" is not installed.
Adapter "lifx" is not installed.
Adapter "lightcontrol" is not installed.
Adapter "lightify" is not installed.
Adapter "link" is not installed.
Adapter "link2home" is not installed.
Adapter "linkeddevices" is not installed.
Adapter "linktap" is not installed.
Update linux-control from @1.1.2 to @1.1.5
NPM version: 10.2.3
npm install iobroker.linux-control@1.1.5 --loglevel error --prefix "/opt/iobroker" (System call)
upload [20] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/words.js words.js application/javascript
Update "system.adapter.linux-control.0"
upload [19] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/style.css style.css text/css
upload [18] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/linux-control.png linux-control.png image/png
upload [17] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/lib/updates.json lib/updates.json application/json
upload [16] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/lib/services.json lib/services.json application/json
upload [15] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/lib/needrestart.json lib/needrestart.json application/json
upload [14] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/lib/jquery.fancytree.dnd5.js lib/jquery.fancytree.dnd5.js application/javascript
upload [13] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/lib/info.json lib/info.json application/json
upload [12] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/lib/distribution.json lib/distribution.json application/json
upload [11] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/lib/control.json lib/control.json application/json
upload [10] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/index_m.js index_m.js application/javascript
upload [9] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/index_m.html index_m.html text/html
upload [8] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/state.png img/state.png image/png
upload [7] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/menu_right.svg img/menu_right.svg image/svg+xml
upload [6] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/menu_down.svg img/menu_down.svg image/svg+xml
upload [5] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/info-big.png img/info-big.png image/png
upload [4] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/folder.png img/folder.png image/png
upload [3] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/checkbox_marked.svg img/checkbox_marked.svg image/svg+xml
upload [2] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/checkbox_intermediate.svg img/checkbox_intermediate.svg image/svg+xml
upload [1] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/img/checkbox.svg img/checkbox.svg image/svg+xml
upload [0] linux-control.admin /opt/iobroker/node_modules/iobroker.linux-control/admin/admin.d.ts admin.d.ts video/mp2t
Adapter "linux-control" updated
Adapter "logparser" is not installed.
Adapter "loqed" is not installed.
Adapter "lovelace" is not installed.
Adapter "lowpass-filter" is not installed.
Adapter "loxone" is not installed.
Adapter "luftdaten" is not installed.
Adapter "lupusec" is not installed.
Adapter "luxtronik1" is not installed.
Adapter "material" is not installed.
Adapter "matrix-org" is not installed.
Adapter "maveo" is not installed.
Adapter "maxcube" is not installed.
Adapter "maxcul" is not installed.
Adapter "mbus" is not installed.
Adapter "mclighting" is not installed.
Adapter "meater" is not installed.
Adapter "mediola-gateway" is not installed.
Adapter "megad" is not installed.
Adapter "megadd" is not installed.
Adapter "megaesp" is not installed.
Adapter "melcloud" is not installed.
Adapter "mercedesme" is not installed.
Adapter "mercury" is not installed.
Adapter "meross" is not installed.
Adapter "meteoalarm" is not installed.
Adapter "micronova" is not installed.
Adapter "midea" is not installed.
Adapter "miele" is not installed.
Adapter "mielecloudservice" is not installed.
Adapter "mihome" is not installed.
Adapter "mihome-cloud" is not installed.
Adapter "mihome-lamp" is not installed.
Adapter "mihome-plug" is not installed.
Adapter "mihome-vacuum" is not installed.
Adapter "mikrotik" is not installed.
Adapter "milight" is not installed.
Adapter "milight-smart-light" is not installed.
Adapter "minuvis" is not installed.
Adapter "mobile" is not installed.
Adapter "modbus" is not installed.
Adapter "moma" is not installed.
Adapter "mpd" is not installed.
Adapter "mqtt" is not installed.
Adapter "mqtt-client" is not installed.
Adapter "musiccast" is not installed.
Adapter "mydlink" is not installed.
Adapter "myenergi" is not installed.
Adapter "mysensors" is not installed.
Adapter "mystrom" is not installed.
Adapter "myvbus" is not installed.
Adapter "nanoleaf-lightpanels" is not installed.
Adapter "net-tools" is not installed.
Adapter "netatmo" is not installed.
Adapter "netatmo-crawler" is not installed.
Adapter "netatmo-energy" is not installed.
Adapter "nibeuplink" is not installed.
Adapter "nina" is not installed.
Adapter "nissan" is not installed.
Adapter "niu" is not installed.
Invalid version of "js-controller". Installed "3.1.6", required ">=3.3.22
Adapter "notification-manager" is not installed.
Adapter "nsclient" is not installed.
Adapter "nuki" is not installed.
Adapter "nuki-extended" is not installed.
Adapter "nut" is not installed.
Adapter "ocpp" is not installed.
Adapter "octoprint" is not installed.
Adapter "odl" is not installed.
Adapter "oekofen-json" is not installed.
Adapter "oilfox" is not installed.
Adapter "omnicomm-lls" is not installed.
Adapter "onkyo" is not installed.
Adapter "onvif" is not installed.
Adapter "opendtu" is not installed.
Adapter "openhab" is not installed.
Adapter "openknx" is not installed.
Adapter "openligadb" is not installed.
Adapter "openweathermap" is not installed.
Adapter "operating-hours" is not installed.
Adapter "opi" is not installed.
Adapter "oppoplayer" is not installed.
Adapter "owfs" is not installed.
Adapter "owntracks" is not installed.
Adapter "panasonic-comfort-cloud" is not installed.
Adapter "panasonic-viera" is not installed.
Adapter "parcel" is not installed.
Adapter "parser" is not installed.
Adapter "paw" is not installed.
Adapter "pegelalarm" is not installed.
Adapter "ph803w" is not installed.
Adapter "phantomjs" is not installed.
Adapter "philips-air" is not installed.
Adapter "philips-tv" is not installed.
Adapter "pi-hole" is not installed.
Adapter "piface" is not installed.
Adapter "pimatic" is not installed.
Adapter "ping" is not installed.
Adapter "pixelit" is not installed.
Adapter "places" is not installed.
Adapter "plenticore" is not installed.
Adapter "plex" is not installed.
Adapter "plexconnect" is not installed.
Adapter "pollenflug" is not installed.
Adapter "porsche" is not installed.
Adapter "powerfox2" is not installed.
Adapter "procon-ip" is not installed.
Adapter "proxmox" is not installed.
Adapter "proxy" is not installed.
Adapter "psa" is not installed.
Adapter "puppeteer" is not installed.
Adapter "pushbullet" is not installed.
Adapter "pushover" is not installed.
Adapter "pushsafer" is not installed.
Adapter "pvforecast" is not installed.
Adapter "pvoutputorg" is not installed.
Adapter "pylontech" is not installed.
Adapter "radar2" is not installed.
Adapter "radiohead" is not installed.
Adapter "rct" is not installed.
Adapter "renacidc" is not installed.
Adapter "renault" is not installed.
Adapter "reolink" is not installed.
Adapter "residents" is not installed.
Adapter "resol" is not installed.
Adapter "rest-api" is not installed.
Adapter "rflink" is not installed.
Adapter "rickshaw" is not installed.
Adapter "ring" is not installed.
Adapter "robonect" is not installed.
Adapter "roborock" is not installed.
Adapter "roomba" is not installed.
Adapter "rpi2" is not installed.
Adapter "rssfeed" is not installed.
Adapter "s7" is not installed.
Adapter "sainlogic" is not installed.
Adapter "samsung" is not installed.
Adapter "samsung_tizen" is not installed.
Adapter "sanext" is not installed.
Adapter "sayit" is not installed.
Adapter "sbfspot" is not installed.
Adapter "scenes" is not installed.
Adapter "scheduler" is not installed.
Adapter "schoolfree" is not installed.
Adapter "schwoerer-ventcube" is not installed.
Adapter "seko" is not installed.
Adapter "selverf" is not installed.
Adapter "semp" is not installed.
Adapter "seq" is not installed.
Adapter "shelly" is not installed.
Adapter "shuttercontrol" is not installed.
Adapter "sia" is not installed.
Adapter "siegenia" is not installed.
Adapter "signal-cmb" is not installed.
Adapter "signifylights" is not installed.
Adapter "simple-api" is up to date.
Adapter "sma-em" is not installed.
Adapter "smappee" is not installed.
Adapter "smart-eq" is not installed.
Adapter "smartcontrol" is not installed.
Adapter "smartgarden" is not installed.
Adapter "smartmeter" is not installed.
Adapter "smartthings" is not installed.
Adapter "snips" is not installed.
Adapter "snmp" is not installed.
Invalid version of "admin". Installed "4.1.11", required ">=5.0.0
Adapter "solarlog" is not installed.
Adapter "solarmanpv" is not installed.
Adapter "solarviewdatareader" is not installed.
Adapter "solarwetter" is not installed.
Adapter "solax" is not installed.
Adapter "sonnen" is not installed.
Adapter "sonoff" is not installed.
Adapter "sonos" is not installed.
Adapter "sony-bravia" is not installed.
Adapter "spotify-premium" is not installed.
Adapter "sprinklecontrol" is not installed.
Adapter "sql" is not installed.
Adapter "squeezeboxrpc" is not installed.
Adapter "starline" is not installed.
Invalid version of "js-controller". Installed "3.1.6", required ">=3.3.0
Adapter "stiebel-isg" is not installed.
Adapter "sureflap" is not installed.
Adapter "swiss-weather-api" is not installed.
Adapter "synochat" is not installed.
Adapter "synology" is not installed.
Adapter "systeminfo" is not installed.
Adapter "tado" is not installed.
Adapter "tahoma" is not installed.
Adapter "tankerkoenig" is not installed.
Adapter "tapo" is not installed.
Adapter "telegram" is not installed.
Adapter "telegram-menu" is not installed.
Adapter "terminal" is not installed.
Adapter "tesla-motors" is not installed.
Adapter "text2command" is not installed.
Adapter "tibberlink" is not installed.
Adapter "tinker" is not installed.
Adapter "tinymqttbroker" is not installed.
Adapter "toyota" is not installed.
Adapter "tr-064" is up to date.
Adapter "traccar" is not installed.
Adapter "tractive-gps" is not installed.
Adapter "tradfri" is not installed.
Invalid version of "js-controller". Installed "3.1.6", required ">=4.0.15
Adapter "trivum" is not installed.
Adapter "tronity" is not installed.
Adapter "tunnelbroker-endpoint-updater" is not installed.
Adapter "tuya" is not installed.
Adapter "tvprogram" is not installed.
Adapter "tvspielfilm" is not installed.
Adapter "twinkly" is not installed.
Adapter "unifi" is not installed.
Invalid version of "js-controller". Installed "3.1.6", required ">=3.3.0
Adapter "uv-protect" is not installed.
Adapter "vaillant" is not installed.
Adapter "valloxmv" is not installed.
Adapter "valuetrackerovertime" is not installed.
Adapter "vcard" is not installed.
Adapter "vds2465-server" is not installed.
Adapter "velux" is not installed.
Adapter "vesync" is not installed.
Adapter "viessmann" is not installed.
Adapter "viessmannapi" is not installed.
Adapter "virtualpowermeter" is not installed.
Update vis from @1.3.4 to @1.5.4
NPM version: 10.2.3
npm install iobroker.vis@1.5.4 --loglevel error --prefix "/opt/iobroker" (System call)
upload [0] vis.admin /opt/iobroker/node_modules/iobroker.vis/admin/vis.png vis.png image/png
Adapter "system.adapter.vis.0" restarted.
upload [600] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/timeandweather/img/clock/6-1.png widgets/timeandweather/img/clock/6-1.png image/png
upload [550] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/timeandweather/img/clock/01-1.png widgets/timeandweather/img/clock/01-1.png image/png
upload [500] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/jqui-mfd/img/sani_valve_60.png widgets/jqui-mfd/img/sani_valve_60.png image/png
upload [450] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/jqui-mfd/img/fts_window_roof.svg widgets/jqui-mfd/img/fts_window_roof.svg image/svg+xml
upload [400] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/jqui-mfd/img/authors.txt widgets/jqui-mfd/img/authors.txt text/plain
upload [350] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/hqwidgets/css/glossy.css widgets/hqwidgets/css/glossy.css text/css
upload [300] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/basic/img/pin_red5.svg widgets/basic/img/pin_red5.svg image/svg+xml
upload [250] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/bars/js/jquery.sidebar.js widgets/bars/js/jquery.sidebar.js application/javascript
upload [200] vis /opt/iobroker/node_modules/iobroker.vis/www/lib/js/jquery-ui-timepicker-addon-1.6.3.js lib/js/jquery-ui-timepicker-addon-1.6.3.js application/javascript
upload [150] vis /opt/iobroker/node_modules/iobroker.vis/www/js/visEditExt.js js/visEditExt.js application/javascript
upload [100] vis /opt/iobroker/node_modules/iobroker.vis/www/js/fm/icon/actions/back.png js/fm/icon/actions/back.png image/png
upload [90] vis /opt/iobroker/node_modules/iobroker.vis/www/img/zip.png img/zip.png image/png
upload [80] vis /opt/iobroker/node_modules/iobroker.vis/www/img/faviconEdit.png img/faviconEdit.png image/png
upload [70] vis /opt/iobroker/node_modules/iobroker.vis/www/img/bulbOn.png img/bulbOn.png image/png
upload [60] vis /opt/iobroker/node_modules/iobroker.vis/www/img/back/oblique-line-bk.png img/back/oblique-line-bk.png image/png
upload [50] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/timestamp.png icon/timestamp.png image/png
upload [40] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/ok.png icon/ok.png image/png
upload [30] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/distribute-vertical-equal.png icon/distribute-vertical-equal.png image/png
upload [20] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-width.png icon/align-width.png image/png
upload [19] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-vertical-top-2.png icon/align-vertical-top-2.png image/png
upload [18] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-vertical-center-2.png icon/align-vertical-center-2.png image/png
upload [17] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-vertical-bottom-2.png icon/align-vertical-bottom-2.png image/png
upload [16] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-horizontal-right-2.png icon/align-horizontal-right-2.png image/png
upload [15] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-horizontal-left.png icon/align-horizontal-left.png image/png
upload [14] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-horizontal-center-2.png icon/align-horizontal-center-2.png image/png
upload [13] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/align-height.png icon/align-height.png image/png
upload [12] vis /opt/iobroker/node_modules/iobroker.vis/www/icon/add.png icon/add.png image/png
upload [11] vis /opt/iobroker/node_modules/iobroker.vis/www/edit.src.html edit.src.html text/html
upload [10] vis /opt/iobroker/node_modules/iobroker.vis/www/edit.html edit.html text/html
upload [9] vis /opt/iobroker/node_modules/iobroker.vis/www/css/vis.css css/vis.css text/css
upload [8] vis /opt/iobroker/node_modules/iobroker.vis/www/css/vis-editor.css css/vis-editor.css text/css
upload [7] vis /opt/iobroker/node_modules/iobroker.vis/www/css/styles.css css/styles.css text/css
upload [6] vis /opt/iobroker/node_modules/iobroker.vis/www/css/montserrat-regular-webfont.woff css/montserrat-regular-webfont.woff font/woff
upload [5] vis /opt/iobroker/node_modules/iobroker.vis/www/css/doc.css css/doc.css text/css
upload [4] vis /opt/iobroker/node_modules/iobroker.vis/www/css/backgrounds.css css/backgrounds.css text/css
upload [3] vis /opt/iobroker/node_modules/iobroker.vis/www/css/app.css css/app.css text/css
upload [2] vis /opt/iobroker/node_modules/iobroker.vis/www/css/add_kian.css css/add_kian.css text/css
upload [1] vis /opt/iobroker/node_modules/iobroker.vis/www/cordova.js cordova.js application/javascript
upload [0] vis /opt/iobroker/node_modules/iobroker.vis/www/cache.manifest cache.manifest text/cache-manifest
Update "system.adapter.vis.0"
Adapter "vis" updated
Adapter "vis-2" is not installed.
Adapter "vis-2-widgets-energy" is not installed.
Adapter "vis-2-widgets-gauges" is not installed.
Adapter "vis-2-widgets-jaeger-design" is not installed.
Adapter "vis-2-widgets-material" is not installed.
Adapter "vis-bars" is up to date.
Adapter "vis-canvas-gauges" is not installed.
Adapter "vis-colorpicker" is up to date.
Adapter "vis-fancyswitch" is up to date.
Adapter "vis-google-fonts" is not installed.
Adapter "vis-history" is not installed.
Adapter "vis-hqwidgets" is up to date.
Adapter "vis-icontwo" is not installed.
Adapter "vis-inventwo" is not installed.
Adapter "vis-jqui-mfd" is up to date.
Adapter "vis-justgage" is not installed.
Adapter "vis-keyboard" is not installed.
Adapter "vis-lcars" is not installed.
Adapter "vis-map" is not installed.
Adapter "vis-material" is not installed.
Adapter "vis-material-advanced" is not installed.
Adapter "vis-materialdesign" is not installed.
Adapter "vis-metro" is not installed.
Adapter "vis-players" is not installed.
Adapter "vis-plumb" is not installed.
Adapter "vis-rgraph" is not installed.
Adapter "vis-timeandweather" is up to date.
Adapter "vis-weather" is not installed.
Adapter "voltoplus" is not installed.
Adapter "volumio" is not installed.
Adapter "volvo" is not installed.
Adapter "vr200" is not installed.
Adapter "vw-connect" is not installed.
Adapter "wallpanel" is not installed.
Adapter "warp" is not installed.
Adapter "weather-warnings" is not installed.
Adapter "weatherflow_udp" is not installed.
Adapter "weatherunderground" is not installed.
Invalid version of "admin". Installed "4.1.11", required ">=5.1.0
Adapter "webcal" is not installed.
Adapter "webui" is not installed.
Adapter "webuntis" is not installed.
Adapter "weishaupt-wem" is not installed.
Adapter "welcome" is not installed.
Adapter "whatsapp-cmb" is not installed.
Adapter "wiegand-tcpip" is not installed.
Adapter "wiffi-wz" is not installed.
Adapter "wifilight" is not installed.
Adapter "windows-control" is not installed.
Adapter "wiobrowser" is not installed.
Adapter "wireguard" is not installed.
Adapter "wireless-mbus" is not installed.
Adapter "withings" is not installed.
Adapter "wlanthermo-nano" is not installed.
Adapter "wled" is not installed.
Adapter "wmswebcontrol" is not installed.
Adapter "wolf" is not installed.
Adapter "wolf-smartset" is not installed.
Adapter "worx" is not installed.
Adapter "ws" is not installed.
Adapter "x-touch" is not installed.
Adapter "xbox" is not installed.
Adapter "xs1" is not installed.
Adapter "xterm" is not installed.
Adapter "yahka" is not installed.
Adapter "yahoo-stock-market" is not installed.
Adapter "yamaha" is not installed.
Adapter "yeelight-2" is not installed.
Adapter "youtube" is not installed.
Adapter "yr" is not installed.
Adapter "zehnder-cloud" is not installed.
Adapter "zendure-solarflow" is not installed.
Adapter "zigbee" is not installed.
Adapter "zigbee2mqtt" is not installed.
Adapter "zont" is not installed.
Adapter "zwave2" is not installed.
pi@raspberrypi:~ $ iob stop
pi@raspberrypi:~ $ iob upgrade self
Ja, Updates sind ohne Fehlermeldung durchgelaufen. Auch das iob upgrade.
Erst nach iob stop und dann upgrade self die Fehlermeldung.
Hallo Thomas,
also bei upgrade self bleibt er wieder hängen.
Nachfolgend die Fehlermeldung:
pi@raspberrypi:~ $ iob upgrade self
Update js-controller from @3.1.6 to @5.0.17
NPM version: 10.2.3
npm install iobroker.js-controller@5.0.17 --loglevel error --unsafe-perm --prefix "/opt/iobroker" (System call)
Objects 127.0.0.1:36630 Error from InMemDB: Error: CONFIG-UNSUPPORTED for ["SET","lua-time-limit","10000"]
States 127.0.0.1:43550 Error from InMemDB: Error: CONFIG-UNSUPPORTED for ["SET","notify-keyspace-events","Exe"]
Objects 127.0.0.1:36630 Error from InMemDB: Error: GET-UNSUPPORTED for namespace cfg.: Data=["meta.objects.features.useSets"]
States 127.0.0.1:43550 Error from InMemDB: Error: GET-UNSUPPORTED for namespace meta.: Data=["meta.states.protocolVersion"]
Objects 127.0.0.1:36630 Error from InMemDB: Error: GET-UNSUPPORTED for namespace cfg.: Data=["meta.objects.protocolVersion"]
Objects 127.0.0.1:36630 Error from InMemDB: Error: scan NOT SUPPORTED
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/iobroker.js-controller
npm ERR! command failed
npm ERR! command sh -c node iobroker.js setup first
npm ERR! Unable to increase LUA script timeout: Error CONFIG-UNSUPPORTED for ["SET","lua-time-limit","10000"]
npm ERR! Unable to enable Expiry Keyspace events from Redis Server: Error CONFIG-UNSUPPORTED for ["SET","notify-keyspace-events","Exe"]
npm ERR! /opt/iobroker/node_modules/standard-as-callback/built/index.js:6
npm ERR! throw e;
npm ERR! ^
npm ERR!
npm ERR! ReplyError: Error scan NOT SUPPORTED
npm ERR! at parseError (/opt/iobroker/node_modules/redis-parser/lib/parser.js:179:12)
npm ERR! at parseType (/opt/iobroker/node_modules/redis-parser/lib/parser.js:302:14)
npm ERR! Emitted 'error' event on ScanStream instance at:
npm ERR! at /opt/iobroker/node_modules/ioredis/built/ScanStream.js:38:22
npm ERR! at tryCatcher (/opt/iobroker/node_modules/standard-as-callback/built/utils.js:12:23)
npm ERR! at /opt/iobroker/node_modules/standard-as-callback/built/index.js:33:51
npm ERR! at process.processTicksAndRejections (node:internal/process/task_queues:95:5) {
npm ERR! command: {
npm ERR! name: 'scan',
npm ERR! args: [ '0', 'MATCH', 'cfg.o.system.host.*', 'COUNT', '250' ]
npm ERR! }
npm ERR! }
npm ERR!
npm ERR! Node.js v18.19.0
npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-02-03T00_01_36_505Z-debug-0.log
Starting node restart.js
pi@raspberrypi:~ $
Und hier noch das Summary:
======================= SUMMARY =======================
v.2023-10-10
Static hostname: raspberrypi
Icon name: computer
Operating System: Raspbian GNU/Linux 10 (buster)
Kernel: Linux 5.10.103-v7l+
Architecture: arm
Installation: native
Kernel: armv7l
Userland: armhf
Timezone: Europe/Berlin (CET, +0100)
User-ID: 1000
X-Server: true
Boot Target: graphical.target
Pending OS-Updates: 0
Pending iob updates: 14
Nodejs-Installation: /usr/bin/nodejs v18.19.0
/usr/bin/node v18.19.0
/usr/bin/npm 10.2.3
/usr/bin/npx 10.2.3
/usr/bin/corepack 0.22.0
Recommended versions are nodejs and npm
Your nodejs installation is correct
MEMORY:
total used free shared buff/cache available
Mem: 7.9G 1.1G 6.1G 39M 755M 6.6G
Swap: 99M 0B 99M
Total: 8.0G 1.1G 6.2G
Active iob-Instances: 26
Active repo: Stable (default)
ioBroker Core: js-controller 3.1.6
admin 4.1.11
ioBroker Status: iobroker is running on this host.
At least one iobroker host is running.
Objects type: file
States type: file
Status admin and web instance:
+ system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin
Objects: 3504
States: 2438
Size of iob-Database:
6.3M /opt/iobroker/iobroker-data/objects.json.bak
6.3M /opt/iobroker/iobroker-data/objects.json
656K /opt/iobroker/iobroker-data/states.json.bak
656K /opt/iobroker/iobroker-data/states.json
=================== END OF SUMMARY ====================
