js-controller 4.0.x jetzt für alle User im STABLE!

Meister Mopper

@apollon77
Nach dem upgrade und Neustart des ioBroker auf meinem master startete der admin-Adapter nicht mit.

Mit iobroker start admin lief's wieder rund

liv-in-sky

Danke für's entwickeln - nach update läuft alles soweit - keine fehler

vis scheint schneller beim laden der views zu sein

bahnuhr

Hallo,

bekomme nun folgende warn und error im log:

telegram.0
2022-02-26 11:10:34.726	error	getMe (reconnect #0) Error:Error: EFATAL: Error: getaddrinfo EAI_AGAIN api.telegram.org

dwd.0
2022-02-26 11:10:33.508	error	Empty or invalid JSON: Cannot read JSON file: Error: getaddrinfo EAI_AGAIN www.dwd.de

hm-rega.0
2022-02-26 11:10:29.731	warn	Script "!# programs.fn 1.3 !# Dieses Script gibt eine Liste der Programme als JSON Strin" ignored, because still pending.

hm-rega.0
2022-02-26 11:10:29.689	warn	Script "!# polling.fn 1.3 !# !# Dieses Script gibt die Werte aller Systemvariablen als J" ignored, because still pending.

telegram.1
2022-02-26 11:10:27.301	error	getMe (reconnect #0) Error:Error: EFATAL: Error: getaddrinfo EAI_AGAIN api.telegram.org

javascript.0
2022-02-26 11:10:20.101	error	Request error: Error: getaddrinfo EAI_AGAIN www.bild.de

javascript.0
2022-02-26 11:10:20.100	error	script.js.Scripte.Sonstige.RSS-Feed: {'errno':-3001,'code':'EAI_AGAIN','syscall':'getaddrinfo','hostname':'www.bild.de'}
host.VM-iobroker
2022-02-26 11:10:17.650	error	instance system.adapter.hm-rpc.1 terminated with code 6 (UNCAUGHT_EXCEPTION)

hm-rpc.1
2022-02-26 11:10:17.016	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

hm-rpc.1
2022-02-26 11:10:17.013	error	Cannot call init: [xmlrpc_bin://192.168.243.12:8701, ""] Cannot call write after a stream was destroyed

hm-rpc.1
2022-02-26 11:10:17.000	error	Exception-Code: ETIMEDOUT: read ETIMEDOUT

hm-rpc.1
2022-02-26 11:10:16.999	error	Error: read ETIMEDOUT at TCP.onStreamRead (internal/stream_base_commons.js:209:20)

hm-rpc.1
2022-02-26 11:10:16.994	error	uncaught exception: read ETIMEDOUT

telegram.0
2022-02-26 11:10:14.696	warn	polling_error: EFATAL, EFATAL: Error: read ETIMEDOUT

Vielleicht habt ihr dafür eine Erklärung.

apollon77

@bahnuhr ja. Dein System hat scheinbar gerade ein Problem mit DNS namensauflösungen. Also vor allem die EAGAIN sagen genau das. Check also mal Netzwerk und DNS. Vllt mal reboot? Sollte aber alles nix mit dem Controller zu tun haben.

Würde erst das fixen. Falls dann hm-Rpc weiter was sagt muss man da schauen.

apollon77

@meister-mopper was stand im log? Falls du schauen willst.

rasrol

Läuft perfekt.
Ich musste zwar ein Neuinstallation per Script durchführen, aber seither keine Fehler.

Debian 11
Node.js:v14.19.0
NPM:6.14.16

Danke

liv-in-sky

@apollon77

hat das was mit controller 4 zu tun - versuch javascript update - ging vor js-c update auch nicht zum updaten - mit controller 4 kommt beim update des javasc. adapters diese meldung:

host.iobroker59
2022-02-26 11:11:00.509	error	iobroker (node:27388) Warning: Accessing non-existent property 'findOne' of module exports inside circular dependency(node:27388) Warning: Accessing non-existent property 'remove' of module exports inside circular dependency(node:27388) Warning: Accessing non-existent property 'updateOne' of module exports inside circular dependency
host.iobroker59
2022-02-26 11:11:00.505	error	iobroker (node:27388) Warning: Accessing non-existent property 'count' of module exports inside circular dependency(Use `node --trace-warnings ...` to show where the warning was created)

siehe auch:https://forum.iobroker.net/post/768862

nehme an, ist anderes topic - nicht für hier?

apollon77

@liv-in-sky ließ mal in der faq. Du hast ne alte mongodb lib wohl von nem node-red. Liegt eher an nodejs 14+ als am Controller.

andiko2

Habe heute die Updates gemacht und alles läuft soweit gut.

Plattform
linux
Betriebssystem
linux
Architektur
x64
CPUs
4
Geschwindigkeit
1692 MHz
Modell
Intel(R) Celeron(R) CPU J3455 @ 1.50GHz
RAM
7.64 GB
System-Betriebszeit
7 T. 01:15:35
Node.js
v12.22.10 (Empfohlene Version v14.19.0)
time
1645873156427
timeOffset
-60
Anzahl der Adapter
399
NPM
6.14.16
Datenträgergröße
109.04 GB
freier Festplattenspeicher
58.43 GB
Betriebszeit
00:29:23
Aktive Instanzen
26
location
/opt/iobroker/
Hostname
ioBrokerPC
Einzigster Fehler mein Adapter Systeminfo geht nicht mehr. im Log steht volgendes:
host.ioBrokerPC
2022-02-26 12:25:34.470 error instance system.adapter.systeminfo.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
systeminfo.0
2022-02-26 12:25:33.842 error Cannot read property 'getObjectList' of undefined
systeminfo.0
2022-02-26 12:25:33.841 error TypeError: Cannot read property 'getObjectList' of undefined at Function.initAdapter (/opt/iobroker/node_modules/iobroker.systeminfo/myAdapter.js:44:55) at Adapter.<anonymous> (/opt/iobroker/node_modules/iobroker.systeminfo/myAdapter.js:118:37) at Adapter.emit (events.js:314:20) at /opt/iobroker/node_modules/@iobroker/js-controller-adapter/build/lib/adapter/adapter.js:8223:26
systeminfo.0
2022-02-26 12:25:33.838 error unhandled promise rejection: Cannot read property 'getObjectList' of undefined
systeminfo.0
2022-02-26 12:25:33.838 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

apollon77

@andiko2 Zu systeminfo: siehe Post #1 ... da stehts drin inkkl. wie du es fixen kannst bis es ein Update gibt

andiko2

@apollon77 was ist Post '#1? Bin nicht so der Forumkenner. Wenn möglich Link.

apollon77

@andiko2 Der erste Post in diesem Thread? Einfach gaaaaaaaaaaaaaaaaaaaanz nach oben Scrollen. Dort im Abschnitt "VOR der Installation"

tobrog

@andiko2 Einfach in der Datei /opt/iobroker/node_modules/iobroker.systeminfo/myAdapter.js in Zeile 44 von"adapter.objects.getObjectList" zu "adapter.getObjectList" ändern.

TDCroPower

Update des js-controllers auf dem Docker Image von buanet ist durch, lediglich der rebuild vom BLE Adapter läuft bei 3 Versuchen nicht durch und im Log sieht man jetzt folgendes...

host.helios64
2022-02-26 12:48:17.793	info	Rebuild for adapter system.adapter.ble.0 not successful in 3 tries. Adapter will not be restarted again. Please execute "npm install --production" in adapter directory manually.
host.helios64
2022-02-26 12:48:17.792	info	instance system.adapter.ble.0 requested a rebuild of its dependencies and will be restarted after that is done.

wenn ich den Befehl in der Konsole eingebe kommt folgendes...

root@helios64:/opt/iobroker# npm install --production
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})

removed 3 packages and updated 1 package in 34.934s

137 packages are looking for funding
  run `npm fund` for details

root@helios64:/opt/iobroker#

was nun !?

andiko2

@tobrog said in js-controller 4.0.x jetzt für alle User im STABLE!:

adapter.getObjectList

Dankeschön. Genau diese Info hat geholfen.

apollon77

@tdcropower Naja du solltest den "npm install" in einem bestimmten Verzeichnis ausführen - steht an sich in den Anweisungen im Log. Du hast es im iobroker "root" verzeichnis ausgeführt. Das hilft nicht, ja.
Du musst es in /opt/iobroker/node_modules/iobroker.ble ausführen

Und ja leider ist der BLE Adapter bze eine Library davon gerade nicht rebuild-fähig. Wir haben dort schon eine Änderung eingereicht, die ist aber noch nicht released.

TDCroPower

@apollon77 danke habe es eben auch im Issue bei git gelesen.
Leider fehlt der Hinweis auf das Verzeichnis in der Log Nachricht, wobei "adapter directory" es eigentlich sagt.

Naja, jetzt hat es funktioniert...

root@helios64:/opt/iobroker# cd node_modules/iobroker.ble/
root@helios64:/opt/iobroker/node_modules/iobroker.ble# npm install -- production
npm WARN deprecated request@2.12.0: request has been deprecated, see https://github.com/request/request/issues/3142

> deasync@0.1.24 install /opt/iobroker/node_modules/iobroker.ble/node_modules/deasync
> node ./build.js

make: Entering directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/deasync/build'
  CXX(target) Release/obj.target/deasync/src/deasync.o
  SOLINK_MODULE(target) Release/obj.target/deasync.node
  COPY Release/deasync.node
make: Leaving directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/deasync/build'
Installed in `/opt/iobroker/node_modules/iobroker.ble/node_modules/deasync/bin/linux-arm64-node-14/deasync.node`

> usb@1.9.2 install /opt/iobroker/node_modules/iobroker.ble/node_modules/usb
> node-gyp-build

make: Entering directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/usb/build'
  CC(target) Release/obj.target/libusb/libusb/libusb/core.o
  CC(target) Release/obj.target/libusb/libusb/libusb/descriptor.o
  CC(target) Release/obj.target/libusb/libusb/libusb/hotplug.o
  CC(target) Release/obj.target/libusb/libusb/libusb/io.o
  CC(target) Release/obj.target/libusb/libusb/libusb/strerror.o
  CC(target) Release/obj.target/libusb/libusb/libusb/sync.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/poll_posix.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/threads_posix.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_usbfs.o
  CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_udev.o
  AR(target) Release/obj.target/usb.a
  COPY Release/usb.a
  CXX(target) Release/obj.target/usb_bindings/src/node_usb.o
../src/node_usb.cc: In function ‘Napi::Value SetDebugLevel(const Napi::CallbackInfo&)’:
../src/node_usb.cc:118:71: warning: ‘void libusb_set_debug(libusb_context*, int)’ is deprecated: Use libusb_set_option instead [-Wdeprecated-declarations]
  118 |  libusb_set_debug(usb_context, info[0].As<Napi::Number>().Int32Value());
      |                                                                       ^
In file included from ../src/node_usb.h:11,
                 from ../src/node_usb.cc:1:
../libusb/libusb/libusb.h:1325:18: note: declared here
 1325 | void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
      |                  ^~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/usb_bindings/src/device.o
  CXX(target) Release/obj.target/usb_bindings/src/transfer.o
  SOLINK_MODULE(target) Release/obj.target/usb_bindings.node
  COPY Release/usb_bindings.node
make: Leaving directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/usb/build'

> @abandonware/bluetooth-hci-socket@0.5.3-8 install /opt/iobroker/node_modules/iobroker.ble/node_modules/@abandonware/bluetooth-hci-socket
> node-pre-gyp install --fallback-to-build

node-pre-gyp ERR! install response status 404 Not Found on https://github.com/abandonware/node-bluetooth-hci-socket/releases/download/0.5.3-8/bluetooth_hci_socket-0.5.3-8-node-v83-linux-arm64.tar.gz 
node-pre-gyp WARN Pre-built binaries not installable for @abandonware/bluetooth-hci-socket@0.5.3-8 and node@14.18.2 (node-v83 ABI, glibc) (falling back to source compile with node-gyp) 
node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/abandonware/node-bluetooth-hci-socket/releases/download/0.5.3-8/bluetooth_hci_socket-0.5.3-8-node-v83-linux-arm64.tar.gz 
make: Entering directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/@abandonware/bluetooth-hci-socket/build'
  CXX(target) Release/obj.target/bluetooth_hci_socket/src/BluetoothHciSocket.o
In file included from /opt/iobroker/.cache/node-gyp/14.18.2/include/node/node_buffer.h:25,
                 from ../src/BluetoothHciSocket.cpp:7:
/opt/iobroker/.cache/node-gyp/14.18.2/include/node/node.h:787:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
  787 |       (node::addon_register_func) (regfunc),                          \
      |       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/opt/iobroker/.cache/node-gyp/14.18.2/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’
  821 |   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
      |   ^~~~~~~~~~~~~
../src/BluetoothHciSocket.cpp:635:1: note: in expansion of macro ‘NODE_MODULE’
  635 | NODE_MODULE(binding, BluetoothHciSocket::Init);
      | ^~~~~~~~~~~
../src/BluetoothHciSocket.cpp: In member function ‘int BluetoothHciSocket::kernelDisconnectWorkArounds(int, char*)’:
../src/BluetoothHciSocket.cpp:401:1: warning: control reaches end of non-void function [-Wreturn-type]
  401 | }
      | ^
  SOLINK_MODULE(target) Release/obj.target/bluetooth_hci_socket.node
  COPY Release/bluetooth_hci_socket.node
  COPY /opt/iobroker/node_modules/iobroker.ble/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node
  TOUCH Release/obj.target/action_after_build.stamp
make: Leaving directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/@abandonware/bluetooth-hci-socket/build'

> @abandonware/noble@1.9.2-15 install /opt/iobroker/node_modules/iobroker.ble/node_modules/@abandonware/noble
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/@abandonware/noble/build'
  SOLINK_MODULE(target) Release/obj.target/noble.node
  COPY Release/noble.node
make: Leaving directory '/opt/iobroker/node_modules/iobroker.ble/node_modules/@abandonware/noble/build'

> core-js@2.6.12 postinstall /opt/iobroker/node_modules/iobroker.ble/node_modules/core-js
> node -e "try{require('./postinstall')}catch(e){}"

Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library!

The project needs your help! Please consider supporting of core-js on Open Collective or Patreon: 
> https://opencollective.com/core-js 
> https://www.patreon.com/zloirock 

Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -)


> parcel-bundler@1.12.5 postinstall /opt/iobroker/node_modules/iobroker.ble/node_modules/parcel-bundler
> node -e "console.log('\u001b[35m\u001b[1mLove Parcel? You can now donate to our open collective:\u001b[22m\u001b[39m\n > \u001b[34mhttps://opencollective.com/parcel/donate\u001b[0m')"

Love Parcel? You can now donate to our open collective:
 > https://opencollective.com/parcel/donate
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.13 (node_modules/glob-watcher/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.13: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.13 (node_modules/@parcel/watcher/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.13: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm64"})

+ production@0.0.2
added 1489 packages from 1205 contributors in 146.424s

109 packages are looking for funding
  run `npm fund` for details

root@helios64:/opt/iobroker/node_modules/iobroker.ble#

.. danach nur noch den Adapter neustarten und er ist wieder Grün!

mikeal created this issue in request/request

open Request’s Past, Present and Future #3142

Neuschwansteini

@tdcropower

mit root geht es mit nodejs nicht gut!

apollon77

@tdcropower Jupp. Jetzt am besten ein „iob fix“ hinterher und dann am besten nicht mehr mit root

TDCroPower

@apollon77 ihr habt Recht, im Docker Image gibt es noch einen iobroker user auf dem iobroker installiert wurde.

iobroker@helios64:~$ ls -l
total 1132
drwxrwxr-x+   3 iobroker iobroker    4096 Feb 26 02:30 backups
-rwxrwxrwx+   1 iobroker iobroker     233 Nov 23 16:15 INSTALLER_INFO.txt
lrwxrwxrwx    1 iobroker iobroker      22 Nov 23 16:15 iob -> /opt/iobroker/iobroker
-rwxr-xr-x+   1 iobroker iobroker     178 Feb 26 12:56 iobroker
-rwxr-xr-x+   1 iobroker iobroker     178 Feb 26 12:40 iobroker.bak
drwxrwxr-x+  10 iobroker iobroker    4096 Feb 26 14:20 iobroker-data
drwxrwxr-x+   2 iobroker iobroker    4096 Feb 26 13:30 log
drwxrwxr-x+ 621 iobroker iobroker   20480 Feb 26 12:51 node_modules
-rw-rwxr--+   1 iobroker iobroker     864 Feb 26 12:39 package.json
-rw-rwxr--+   1 iobroker iobroker 1098042 Feb 26 12:51 package-lock.json
-rw-rwxr--+   1 iobroker iobroker    5693 Dez 23 01:16 reinstall.js
iobroker@helios64:~$

Dann bleibt der default Portainer User root wieder weg.

NEWS

js-controller 4.0.x jetzt für alle User im STABLE!

open Request’s Past, Present and Future #3142

Support us

464
Online

31.6k
Users

79.6k
Topics

1.3m
Posts

NEWS

js-controller 4.0.x jetzt für alle User im STABLE!

open Request’s Past, Present and Future #3142

Support us

464Online

31.6kUsers

79.6kTopics

1.3mPosts

464
Online

31.6k
Users

79.6k
Topics

1.3m
Posts