[ESPHome] Beta release
-
@beowolf welche python version ist drauf?
-
@maxpd
pi@ioBroker-Master:~ $ python --version
Python 2.7.16
pi@ioBroker-Master:~ $ python3 --version
Python 3.7.3
pi@ioBroker-Master:~ $ -
Ich würde dir ein Update empfehlen:
https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye
Danach gehts.
-
@beowolf sagte in [ESPHome] Beta release:
@maxpd
pi@ioBroker-Master:~ $ python --version
Python 2.7.16
pi@ioBroker-Master:~ $ python3 --version
Python 3.7.3
pi@ioBroker-Master:~ $python muss nach 3.7 verweisen , da dies für jedes System anders ist kan ich die Python Installation selber leider nicht Supporten
-
@beowolf said in [ESPHome] Beta release:
Python 2.7.16
Python 2 ist übrigens schon seit über 2 Jahren EOL. Wahrscheinlich gibt es so ziemliche keine (aktuelle) Software die nicht mit Python 3 kompatibel ist
-
@beowolf
Debian? Bullseye?Dann würde ich empfehlen:
sudo apt update sudo apt install python-is-python3 sudo apt autoremove -
Hm.
Ich habe jetzt alles neu aufgesetzt. Backup eingespielt usw.Es kommt immer noch diese Meldungen:
pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm i iobroker.esphome@latest > iobroker.esphome@0.2.4 install /opt/iobroker/node_modules/iobroker.esphome > npip install No python_modules directory; installing pip locally if needed. Cache entry deserialization failed, entry ignored Cache entry deserialization failed, entry ignored Successfully completed pip check. Collecting esphome>=2021.8 Using cached esphome-2022.3.0-py2.py3-none-any.whl (2.2 MB) Collecting tornado>=3.2 Using cached tornado-6.1.tar.gz (497 kB) Preparing metadata (setup.py) ... done Collecting tzdata>=2021.1 Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) Collecting kconfiglib==13.7.1 Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) Collecting esptool==3.2 Using cached esptool-3.2.tar.gz (206 kB) Preparing metadata (setup.py) ... done Collecting PyYAML==6.0 Using cached PyYAML-6.0.tar.gz (124 kB) Installing build dependencies ... done Getting requirements to build wheel ... done Preparing metadata (pyproject.toml) ... done Collecting aioesphomeapi==10.8.2 Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) Collecting paho-mqtt==1.6.1 Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Preparing metadata (setup.py) ... done Collecting pyserial==3.5 Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) Collecting voluptuous==0.12.2 Using cached voluptuous-0.12.2.tar.gz (48 kB) Preparing metadata (setup.py) ... done Collecting tzlocal==4.1 Using cached tzlocal-4.1-py3-none-any.whl (19 kB) Collecting platformio==5.2.5 Using cached platformio-5.2.5.tar.gz (218 kB) Preparing metadata (setup.py) ... done Collecting zeroconf==0.38.3 Using cached zeroconf-0.38.3-py3-none-any.whl (106 kB) Collecting click==8.0.3 Using cached click-8.0.3-py3-none-any.whl (97 kB) Collecting colorama==0.4.4 Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting esphome-dashboard==20220309.0 Using cached esphome_dashboard-20220309.0-py3-none-any.whl (593 kB) Collecting noiseprotocol<1.0,>=0.3.1 Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) Collecting protobuf<4.0,>=3.12.2 Using cached protobuf-3.19.4-py2.py3-none-any.whl (162 kB) Collecting bitstring>=3.1.6 Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) Collecting cryptography>=2.1.4 Using cached cryptography-36.0.2.tar.gz (572 kB) Installing build dependencies ... error error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> [122 lines of output] Collecting setuptools>=40.6.0 Using cached setuptools-60.10.0-py3-none-any.whl (1.1 MB) Collecting wheel Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB) Collecting cffi>=1.12 Using cached cffi-1.15.0.tar.gz (484 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting setuptools-rust>=0.11.4 Using cached setuptools_rust-1.1.2-py3-none-any.whl (21 kB) Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) Collecting typing-extensions>=3.7.4.3 Using cached typing_extensions-4.1.1-py3-none-any.whl (26 kB) Collecting semantic-version<3,>=2.8.2 Using cached semantic_version-2.9.0-py2.py3-none-any.whl (15 kB) Building wheels for collected packages: cffi Building wheel for cffi (setup.py): started Building wheel for cffi (setup.py): finished with status 'error' error: subprocess-exited-with-error × python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [36 lines of output] running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-3.9 creating build/lib.linux-armv7l-3.9/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/lock.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/error.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/model.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/api.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.9/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-3.9 creating build/temp.linux-armv7l-3.9/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.9/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cffi Running setup.py clean for cffi Failed to build cffi Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi Running setup.py install for cffi: started Running setup.py install for cffi: finished with status 'error' error: subprocess-exited-with-error × Running setup.py install for cffi did not run successfully. │ exit code: 1 ╰─> [38 lines of output] running install /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_py creating build creating build/lib.linux-armv7l-3.9 creating build/lib.linux-armv7l-3.9/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/lock.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/error.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/model.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/api.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.9/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-3.9 creating build/temp.linux-armv7l-3.9/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.9/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: legacy-install-failure × Encountered error while trying to install package. ╰─> cffi note: This is an issue with the package mentioned above, not pip. hint: See above for output from the failure. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! iobroker.esphome@0.2.4 install: `npip install` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the iobroker.esphome@0.2.4 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-03-21T16_38_52_555Z-debug.log pi@raspberrypi:/opt/iobroker $Wo mache ich etwas falsch?
-
@beowolf sagte in [ESPHome] Beta release:
Wo mache ich etwas falsch?
Wie ist denn python jetzt installiert?
python --version python3 --version apt policy python3-pip apt policy python3-cffi -
pi@raspberrypi:/opt/iobroker $ python --version Python 3.9.2 pi@raspberrypi:/opt/iobroker $ python3 --version Python 3.9.2 pi@raspberrypi:/opt/iobroker $ apt policy python3-pip python3-pip: Installiert: (keine) Installationskandidat: 20.3.4-4+rpt1 Versionstabelle: 20.3.4-4+rpt1 500 500 http://archive.raspberrypi.org/debian bullseye/main armhf Packages 20.3.4-4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages pi@raspberrypi:/opt/iobroker $ apt policy python3-cffi python3-cffi: Installiert: (keine) Installationskandidat: 1.14.5-1 Versionstabelle: 1.14.5-1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages pi@raspberrypi:/opt/iobroker $ -
Ich vermute python3-pip sollte mindestens installiert sein.
-
Ich habe es hier mit versucht.
sudo apt-get --reinstall install python3-pip
Kein Erfolg
pi@raspberrypi:/ $ python3 -V Python 3.9.2 pi@raspberrypi:/ $ pip3 -V pip 20.3.4 from /usr/lib/python3/dist-packages/pip (python 3.9) -
sudo apt update sudo apt install python3-pip -
Asche auf mein Haupt - Hin und wieder ein reboot und alles geht.
-
Wenn ich lediglich ein Script über 1 oder 2 Template Buttons
https://esphome.io/components/button/template.html
starten möchte und die gesamte restliche Logik und Variablen etc direkt auf dem ESP platziere, was benötigst du dann an Informationen?
-
@maxpd sagte in [ESPHome] Beta release:
starten möchte und die gesamte restliche Logik und Variablen etc direkt auf dem ESP platziere, was benötigst du dann an Informationen?
ich glaube nix
die frage ist ob ein template Button Exposed wird.
Mal mal bitte einen in der yaml (kan ich später erst probieren) und schaue was passiert.We der wert Pere Opi uebertragen wird koennen 2 Sachen passieren:
- die daten passen in die jetzigen Adapter code
- es ist eine neue, unbekannte entity
Beim zweiten fall wuerde eine fehler/warnung in ioBroker log sichtbar sein und die infos brauche ich dan
-
@dutchman Ich glaube dir hat die Spracheingabe den Text ein bissl versämmelt
Aber ich hab die yaml hier gebaut
esphome: name: little_wemos platform: ESP8266 board: d1_mini wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Little Wemos Fallback Hotspot" password: "************" captive_portal: # Enable logging logger: api: services: - service: control_servo variables: level: float then: - servo.write: id: my_servo level: !lambda 'return level / 100.0;' ota: output: - platform: esp8266_pwm id: pwm_output pin: D3 frequency: 50 Hz servo: - id: my_servo output: pwm_output button: - platform: template name: "Template Button" on_press: - logger.log: Button Pressed - cover.open: flying - delay: 8s - cover.close: flying - delay: 9s cover: - platform: time_based id: flying open_action: # then: - servo.write: id: my_servo level: 10.0% open_duration: 5s close_action: # then: - servo.write: id: my_servo level: -10.0% close_duration: 6s stop_action: # then: - servo.write: id: my_servo level: 0% - servo.detach: my_servound bekomme die Ausgabe. Wobei mein wemos plötzlich immer disconnected. Liegt eventuell am Update auf die 2022.03?
esphome.0 2022-03-22 20:14:42.592 debug 192.168.178.53 client data 4 little_wemos (esphome v2022.3.0)" little_wemos esphome.0 2022-03-22 20:14:42.575 error ESPHome client 192.168.178.53 TypeError: Cannot read property 'deserializeBinary' of undefined esphome.0 2022-03-22 20:14:42.574 debug 192.168.178.53 client data esphome.0 2022-03-22 20:14:13.912 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:13,912 INFO 304 GET /devices (192.168.178.146) 1.62ms esphome.0 2022-03-22 20:14:12.535 warn Client 192.168.178.53 Timeout, connection Lost, will reconnect automatically when device is available! esphome.0 2022-03-22 20:14:09.061 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:09,061 INFO Running command 'esphome --dashboard -q vscode --ace /opt/iobroker/iobroker-data/esphome.0' esphome.0 2022-03-22 20:14:08.989 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,989 INFO 101 GET /ace (192.168.178.146) 1.17ms esphome.0 2022-03-22 20:14:08.971 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,970 INFO 200 GET /static/fonts/material-icons/MaterialIcons-Regular.woff2 (192.168.178.146) 1.87ms esphome.0 2022-03-22 20:14:08.913 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,913 INFO 304 GET /devices (192.168.178.146) 1.58ms esphome.0 2022-03-22 20:14:08.877 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,876 INFO 200 GET /static/js/vendor/ace/mode-yaml.js (192.168.178.146) 2.07ms esphome.0 2022-03-22 20:14:08.874 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,873 INFO 200 GET /static/js/vendor/ace/theme-dreamweaver.js (192.168.178.146) 1.69ms esphome.0 2022-03-22 20:14:08.696 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,696 INFO 200 GET /static/js/vendor/jquery-ui/jquery-ui.min.js?hash=cab3392d (192.168.178.146) 189.47ms esphome.0 2022-03-22 20:14:08.666 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,666 INFO 200 GET /static/js/vendor/materialize/materialize.min.js?hash=4be20daf (192.168.178.146) 158.14ms esphome.0 2022-03-22 20:14:08.636 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,635 INFO 200 GET /static/js/esphome/index-92d154f2.js (192.168.178.146) 114.09ms esphome.0 2022-03-22 20:14:08.633 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,633 INFO 200 GET /static/js/vendor/ace/ace.js?hash=65322f49 (192.168.178.146) 124.26ms esphome.0 2022-03-22 20:14:08.516 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,515 INFO 200 GET /static/js/vendor/jquery-validate/jquery.validate.min.js?hash=aad785d4 (192.168.178.146) 8.16ms esphome.0 2022-03-22 20:14:08.511 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,511 INFO 200 GET /static/js/vendor/jquery/jquery.min.js?hash=12108007 (192.168.178.146) 5.14ms esphome.0 2022-03-22 20:14:08.462 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,461 INFO 200 GET /static/css/esphome-2.css?hash=b79b4733 (192.168.178.146) 7.20ms esphome.0 2022-03-22 20:14:08.459 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,459 INFO 200 GET /static/css/vendor/materialize/materialize.min.css?hash=ec1df3ba (192.168.178.146) 5.40ms esphome.0 2022-03-22 20:14:08.452 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,450 INFO 200 GET /static/fonts/material-icons/material-icons.css?hash=ead4c276 (192.168.178.146) 3.75ms esphome.0 2022-03-22 20:14:08.449 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,449 INFO 200 GET /static/fonts/material-icons/MaterialIcons-Regular.woff2?hash=570eb838 (192.168.178.146) 2.71ms esphome.0 2022-03-22 20:14:08.412 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,411 INFO 304 GET /?instance=0&newReact=true&0&react=colored (192.168.178.146) 2.16ms esphome.0 2022-03-22 20:14:07.562 error ESPHome client 192.168.178.53 TypeError: Cannot read property 'deserializeBinary' of undefined esphome.0 2022-03-22 20:14:07.561 debug 192.168.178.53 client data 4 little_wemos (esphome v2022.3.0)" little_wemos esphome.0 2022-03-22 20:14:07.543 error ESPHome client 192.168.178.53 TypeError: Cannot read property 'deserializeBinary' of undefined esphome.0 2022-03-22 20:14:07.542 debug 192.168.178.53 client data esphome.0 2022-03-22 20:13:37.521 warn Client 192.168.178.53 Timeout, connection Lost, will reconnect automatically when device is available! -
Kurze Zwischenfrage: Hat schon jemand Erfahrungen mit dem MCP23016 oder PCF8575 mit ESPHome?
Ich möchte > 8 Eingänge abfragen. Nicht zeitkritsch, Abfrageintervall von einigen Sekunden wäre kein Problem.
Die Eingänge werden mit open collector auf GND gezogen. Wenn man einen internen pull up nutzen könnte, wäre das einfacher. Beim MCP23ß16 scheint das nicht zu gehen. -
@klassisch said in [ESPHome] Beta release:
Erfahrungen mit dem MCP23016 oder PCF8575 mit ESPHome?
Ich möchte > 8 Eingänge abfragen.Ich glaube (wenn ich mich recht erinnere) hat der PCF8575 die blöde Eigenschaft direkt nach dem starte/nbestromen alle GPIO auf Output und high zu setzen. Erst wenn esphome die init routine durchlaufen hat sind die GPIO's vom PCF8575 auf input gesetzt.
Die MCP230xx haben diese Eigenheit soweit ich mich erinnere nicht.
Wenn man einen internen pull up nutzen könnte, wäre das einfacher. Beim MCP23ß16 scheint das nicht zu gehen.
Dafür der MCP23008 und MCP23017 wenn ich die docs passend interpretiere
-
Vielen Dank!
@opensourcenomad sagte in [ESPHome] Beta release:
@klassisch said in [ESPHome] Beta release:
Ich glaube (wenn ich mich recht erinnere) hat der PCF8575 die blöde Eigenschaft direkt nach dem starte/nbestromen alle GPIO auf Output und high zu setzen. Erst wenn esphome die init routine durchlaufen hat sind die GPIO's vom PCF8575 auf input gesetzt.ugly! Dann zerschießt er u.U. die oc Ausgänge meiner Sensoren. Müßte man also jeweils noch einen Serienwiderstand einfügen, 330 Ohm
Die MCP230xx haben diese Eigenheit soweit ich mich erinnere nicht.
Das wäre gut!
Wenn man einen internen pull up nutzen könnte, wäre das einfacher. Beim MCP23ß16 scheint das nicht zu gehen.
Ja steht in der ESPHome Doku so beim MCP23016
Dafür der MCP23008 und MCP23017 wenn ich die docs passend interpretiere
Zumindest die bei ESPHome angegebenen Beispiele zeigen mein 08 und beim 17 die Komentarzeile
# One of INPUT or OUTPUTbzw.
mode: input: true pullup: true inverted: falsedie Komentarzeile
# One of INPUT or OUTPUTsteht auch im Beispielprogramm des PCF8574 / 5.
So richtig eindeutig ist die Doku leider nicht.
und der MCP23017 kostet ein Vemögen!
Und den MCP23008 gibt es derzeit nicht als brakout Modul.
Bleibt wohl nur PCF8575 mit Reihenwiderstand und hoffen, dass der pull up funktioniert. -
Hallo,
ich habe ESPHome auf meinem Mac installiert.
Auf meinem Pi läuft IObroker und es klappt einfach nicht den Adapter zu Installieren (Fehrler 25)
Wenn ich es über die Konsole mache kommt das:npm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/iobroker.esphome npm ERR! command failed npm ERR! command sh -c npip install npm ERR! No python_modules directory; installing pip locally if needed. npm ERR! Successfully completed pip check. npm ERR! Collecting esphome>=2021.8 npm ERR! Using cached esphome-2022.2.6-py2.py3-none-any.whl (2.1 MB) npm ERR! Collecting tornado>=3.2 npm ERR! Using cached tornado-6.1.tar.gz (497 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting aioesphomeapi==10.8.2 npm ERR! Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) npm ERR! Collecting colorama==0.4.4 npm ERR! Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) npm ERR! Collecting esphome-dashboard==20220209.0 npm ERR! Using cached esphome_dashboard-20220209.0-py3-none-any.whl (592 kB) npm ERR! Collecting PyYAML==6.0 npm ERR! Using cached PyYAML-6.0.tar.gz (124 kB) npm ERR! Installing build dependencies: started npm ERR! Installing build dependencies: finished with status 'done' npm ERR! Getting requirements to build wheel: started npm ERR! Getting requirements to build wheel: finished with status 'done' npm ERR! Preparing metadata (pyproject.toml): started npm ERR! Preparing metadata (pyproject.toml): finished with status 'done' npm ERR! Collecting esptool==3.2 npm ERR! Using cached esptool-3.2.tar.gz (206 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting platformio==5.2.5 npm ERR! Using cached platformio-5.2.5.tar.gz (218 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting kconfiglib==13.7.1 npm ERR! Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) npm ERR! Collecting tzdata>=2021.1 npm ERR! Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) npm ERR! Collecting click==8.0.3 npm ERR! Using cached click-8.0.3-py3-none-any.whl (97 kB) npm ERR! Collecting tzlocal==4.1 npm ERR! Using cached tzlocal-4.1-py3-none-any.whl (19 kB) npm ERR! Collecting paho-mqtt==1.6.1 npm ERR! Using cached paho-mqtt-1.6.1.tar.gz (99 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting zeroconf==0.38.3 npm ERR! Using cached zeroconf-0.38.3-py3-none-any.whl (106 kB) npm ERR! Collecting voluptuous==0.12.2 npm ERR! Using cached voluptuous-0.12.2.tar.gz (48 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting pyserial==3.5 npm ERR! Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) npm ERR! Collecting protobuf<4.0,>=3.12.2 npm ERR! Using cached protobuf-3.19.4-py2.py3-none-any.whl (162 kB) npm ERR! Collecting noiseprotocol<1.0,>=0.3.1 npm ERR! Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) npm ERR! Collecting importlib-metadata npm ERR! Using cached importlib_metadata-4.11.3-py3-none-any.whl (18 kB) npm ERR! Collecting bitstring>=3.1.6 npm ERR! Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) npm ERR! Collecting cryptography>=2.1.4 npm ERR! Using cached cryptography-36.0.2.tar.gz (572 kB) npm ERR! Installing build dependencies: started npm ERR! Installing build dependencies: finished with status 'error' npm ERR! Cache entry deserialization failed, entry ignored npm ERR! Cache entry deserialization failed, entry ignored npm ERR! error: subprocess-exited-with-error npm ERR! npm ERR! × pip subprocess to install build dependencies did not run successfully. npm ERR! │ exit code: 1 npm ERR! ╰─> [122 lines of output] npm ERR! Collecting setuptools>=40.6.0 npm ERR! Using cached setuptools-61.0.0-py3-none-any.whl (1.1 MB) npm ERR! Collecting wheel npm ERR! Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB) npm ERR! Collecting cffi>=1.12 npm ERR! Using cached cffi-1.15.0.tar.gz (484 kB) npm ERR! Preparing metadata (setup.py): started npm ERR! Preparing metadata (setup.py): finished with status 'done' npm ERR! Collecting setuptools-rust>=0.11.4 npm ERR! Using cached setuptools_rust-1.2.0-py3-none-any.whl (21 kB) npm ERR! Collecting pycparser npm ERR! Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) npm ERR! Collecting semantic-version<3,>=2.8.2 npm ERR! Using cached semantic_version-2.9.0-py2.py3-none-any.whl (15 kB) npm ERR! Collecting typing-extensions>=3.7.4.3 npm ERR! Using cached typing_extensions-4.1.1-py3-none-any.whl (26 kB) npm ERR! Building wheels for collected packages: cffi npm ERR! Building wheel for cffi (setup.py): started npm ERR! Building wheel for cffi (setup.py): finished with status 'error' npm ERR! error: subprocess-exited-with-error npm ERR! npm ERR! × python setup.py bdist_wheel did not run successfully. npm ERR! │ exit code: 1 npm ERR! ╰─> [36 lines of output] npm ERR! running bdist_wheel npm ERR! running build npm ERR! running build_py npm ERR! creating build npm ERR! creating build/lib.linux-armv7l-3.7 npm ERR! creating build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! running build_ext npm ERR! building '_cffi_backend' extension npm ERR! creating build/temp.linux-armv7l-3.7 npm ERR! creating build/temp.linux-armv7l-3.7/c npm ERR! arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -flto -fuse-linker-plugin -ffat-lto-objects -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o npm ERR! c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden npm ERR! #include <Python.h> npm ERR! ^~~~~~~~~~ npm ERR! compilation terminated. npm ERR! error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 npm ERR! [end of output] npm ERR! npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! ERROR: Failed building wheel for cffi npm ERR! Running setup.py clean for cffi npm ERR! Failed to build cffi npm ERR! Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi npm ERR! Running setup.py install for cffi: started npm ERR! Running setup.py install for cffi: finished with status 'error' npm ERR! error: subprocess-exited-with-error npm ERR! npm ERR! × Running setup.py install for cffi did not run successfully. npm ERR! │ exit code: 1 npm ERR! ╰─> [38 lines of output] npm ERR! running install npm ERR! /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.7/site-packages/setuptools/command/install.py:37: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. npm ERR! setuptools.SetuptoolsDeprecationWarning, npm ERR! running build npm ERR! running build_py npm ERR! creating build npm ERR! creating build/lib.linux-armv7l-3.7 npm ERR! creating build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi npm ERR! running build_ext npm ERR! building '_cffi_backend' extension npm ERR! creating build/temp.linux-armv7l-3.7 npm ERR! creating build/temp.linux-armv7l-3.7/c npm ERR! arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -flto -fuse-linker-plugin -ffat-lto-objects -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o npm ERR! c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden npm ERR! #include <Python.h> npm ERR! ^~~~~~~~~~ npm ERR! compilation terminated. npm ERR! error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 npm ERR! [end of output] npm ERR! npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! error: legacy-install-failure npm ERR! npm ERR! × Encountered error while trying to install package. npm ERR! ╰─> cffi npm ERR! npm ERR! note: This is an issue with the package mentioned above, not pip. npm ERR! hint: See above for output from the failure. npm ERR! [end of output] npm ERR! npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! error: subprocess-exited-with-error npm ERR! npm ERR! × pip subprocess to install build dependencies did not run successfully. npm ERR! │ exit code: 1 npm ERR! ╰─> See above for output. npm ERR! npm ERR! note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-03-25T13_16_24_023Z-debug.logich weiß jetzt nicht mehr weiter was zu tun ist und will auch nichts zerschießen. Ich möchte später dann meine verschiedenen ESP´s einbinden (ESP32 Cam und verschiedene Sensoren sowie Lichtsteuerung).
Ich danke Euch für Eure Hilfe.
LG
Kai
