NEWS
[ESPHome] Beta release
-
@a200 said in [ESPHome] Beta release:
@johannes-bauerstatter Ein ESPHome Update innerhalb des USPHome-Adapters ist so einfach, dass es schon peinlich ist.
- IoBroker unter Adapter "Expertenmodus" aktivieren.
- Auf die Katze (installieren aus eigener URL) klicken.
- Im Tab "VON NPM" den ESphome-Adapter auswählen.
Der Adapter wird reinstalliert, wobei die neuste Version von ESPHome gezogen und installiert wird. Alle Yamls und die Datenpunkte bleiben erhalten.
Hi,
bei mir wird der ESP-Home Adapter nicht aufgelistet. Muss man noch was beachten?
Danke und Grüße, Bernd
aktuell habe ich die ESPHome version 2021.8.2 compiled on Mar 14 2022, 09:07:40
@bernd33-1 Hast du dein Repository auf BETA umgestellt?
-
@a200 :man-facepalming: Oh man, ja klar. Ich verwende ESPHome schon so selbstverständlich das ich garnicht mehr an Beta denke.
Ja klar, im Beta ist der Adapter da. Danke und schönen Sonntag noch, Bernd
@bernd33-1 sagte in [ESPHome] Beta release:
@a200 :man-facepalming: Oh man, ja klar. Ich verwende ESPHome schon so selbstverständlich das ich garnicht mehr an Beta denke.
Ja klar, im Beta ist der Adapter da. Danke und schönen Sonntag noch, Bernd
Freut mich zu hören. Über einen + würde ich mich freuen. LG
-
@johannes-bauerstatter Ein ESPHome Update innerhalb des USPHome-Adapters ist so einfach, dass es schon peinlich ist.
- IoBroker unter Adapter "Expertenmodus" aktivieren.
- Auf die Katze (installieren aus eigener URL) klicken.
- Im Tab "VON NPM" den ESphome-Adapter auswählen.
Der Adapter wird reinstalliert, wobei die neuste Version von ESPHome gezogen und installiert wird. Alle Yamls und die Datenpunkte bleiben erhalten.
Ich bekomme den Adapter nicht installiert.
Hier die Meldungen:
$ iobroker add esphome --host ioBroker-Master NPM version: 6.14.16 Installing iobroker.esphome@0.2.4... (System call) > iobroker.esphome@0.2.4 install /opt/iobroker/node_modules/iobroker.esphome> npip install No python_modules directory; installing pip locally if needed. Successfully completed pip check. Collecting esphome>=2021.8 Using cached esphome-2022.2.6-py2.py3-none-any.whl (2.1 MB) Collecting tornado>=3.2 Using cached tornado-6.1.tar.gz (497 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting tzdata>=2021.1 Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) Collecting esphome-dashboard==20220209.0 Using cached esphome_dashboard-20220209.0-py3-none-any.whl (592 kB) Collecting click==8.0.3 Using cached click-8.0.3-py3-none-any.whl (97 kB) Collecting PyYAML==6.0 Using cached PyYAML-6.0.tar.gz (124 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting aioesphomeapi==10.8.2 Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) Collecting zeroconf==0.38.3 Using cached zeroconf-0.38.3-py3-none-any.whl (106 kB) Collecting kconfiglib==13.7.1 Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) Collecting esptool==3.2 Using cached esptool-3.2.tar.gz (206 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting colorama==0.4.4 Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting pyserial==3.5 Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) Collecting tzlocal==4.1 Using cached tzlocal-4.1-py3-none-any.whl (19 kB) Collecting platformio==5.2.5 Using cached platformio-5.2.5.tar.gz (218 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting voluptuous==0.12.2 Using cached voluptuous-0.12.2.tar.gz (48 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting paho-mqtt==1.6.1 Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting protobuf<4.0,>=3.12.2 Using cached protobuf-3.19.4-py2.py3-none-any.whl (162 kB) Collecting noiseprotocol<1.0,>=0.3.1 Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) Collecting importlib-metadata Using cached importlib_metadata-4.11.3-py3-none-any.whl (18 kB) Collecting bitstring>=3.1.6 Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) Collecting cryptography>=2.1.4 Using cached cryptography-36.0.2.tar.gz (572 kB) Installing build dependencies: started Installing build dependencies: finished with status 'error' host.ioBroker-Master Cannot install iobroker.esphome@0.2.4: 1 ERROR: Process exited with code 25Wo habe ich da einen Fehler?
-
-
@maxpd
pi@ioBroker-Master:~ $ python --version
Python 2.7.16
pi@ioBroker-Master:~ $ python3 --version
Python 3.7.3
pi@ioBroker-Master:~ $ -
@maxpd
pi@ioBroker-Master:~ $ python --version
Python 2.7.16
pi@ioBroker-Master:~ $ python3 --version
Python 3.7.3
pi@ioBroker-Master:~ $@beowolf sagte in [ESPHome] Beta release:
@maxpd
pi@ioBroker-Master:~ $ python --version
Python 2.7.16
pi@ioBroker-Master:~ $ python3 --version
Python 3.7.3
pi@ioBroker-Master:~ $python muss nach 3.7 verweisen , da dies für jedes System anders ist kan ich die Python Installation selber leider nicht Supporten
-
@maxpd
pi@ioBroker-Master:~ $ python --version
Python 2.7.16
pi@ioBroker-Master:~ $ python3 --version
Python 3.7.3
pi@ioBroker-Master:~ $@beowolf said in [ESPHome] Beta release:
Python 2.7.16
Python 2 ist übrigens schon seit über 2 Jahren EOL. Wahrscheinlich gibt es so ziemliche keine (aktuelle) Software die nicht mit Python 3 kompatibel ist :bulb:
-
@maxpd
pi@ioBroker-Master:~ $ python --version
Python 2.7.16
pi@ioBroker-Master:~ $ python3 --version
Python 3.7.3
pi@ioBroker-Master:~ $@beowolf
Debian? Bullseye?Dann würde ich empfehlen:
sudo apt update sudo apt install python-is-python3 sudo apt autoremove -
@beowolf
Debian? Bullseye?Dann würde ich empfehlen:
sudo apt update sudo apt install python-is-python3 sudo apt autoremoveHm.
Ich habe jetzt alles neu aufgesetzt. Backup eingespielt usw.Es kommt immer noch diese Meldungen:
pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm i iobroker.esphome@latest > iobroker.esphome@0.2.4 install /opt/iobroker/node_modules/iobroker.esphome > npip install No python_modules directory; installing pip locally if needed. Cache entry deserialization failed, entry ignored Cache entry deserialization failed, entry ignored Successfully completed pip check. Collecting esphome>=2021.8 Using cached esphome-2022.3.0-py2.py3-none-any.whl (2.2 MB) Collecting tornado>=3.2 Using cached tornado-6.1.tar.gz (497 kB) Preparing metadata (setup.py) ... done Collecting tzdata>=2021.1 Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) Collecting kconfiglib==13.7.1 Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) Collecting esptool==3.2 Using cached esptool-3.2.tar.gz (206 kB) Preparing metadata (setup.py) ... done Collecting PyYAML==6.0 Using cached PyYAML-6.0.tar.gz (124 kB) Installing build dependencies ... done Getting requirements to build wheel ... done Preparing metadata (pyproject.toml) ... done Collecting aioesphomeapi==10.8.2 Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) Collecting paho-mqtt==1.6.1 Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Preparing metadata (setup.py) ... done Collecting pyserial==3.5 Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) Collecting voluptuous==0.12.2 Using cached voluptuous-0.12.2.tar.gz (48 kB) Preparing metadata (setup.py) ... done Collecting tzlocal==4.1 Using cached tzlocal-4.1-py3-none-any.whl (19 kB) Collecting platformio==5.2.5 Using cached platformio-5.2.5.tar.gz (218 kB) Preparing metadata (setup.py) ... done Collecting zeroconf==0.38.3 Using cached zeroconf-0.38.3-py3-none-any.whl (106 kB) Collecting click==8.0.3 Using cached click-8.0.3-py3-none-any.whl (97 kB) Collecting colorama==0.4.4 Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting esphome-dashboard==20220309.0 Using cached esphome_dashboard-20220309.0-py3-none-any.whl (593 kB) Collecting noiseprotocol<1.0,>=0.3.1 Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) Collecting protobuf<4.0,>=3.12.2 Using cached protobuf-3.19.4-py2.py3-none-any.whl (162 kB) Collecting bitstring>=3.1.6 Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) Collecting cryptography>=2.1.4 Using cached cryptography-36.0.2.tar.gz (572 kB) Installing build dependencies ... error error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> [122 lines of output] Collecting setuptools>=40.6.0 Using cached setuptools-60.10.0-py3-none-any.whl (1.1 MB) Collecting wheel Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB) Collecting cffi>=1.12 Using cached cffi-1.15.0.tar.gz (484 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting setuptools-rust>=0.11.4 Using cached setuptools_rust-1.1.2-py3-none-any.whl (21 kB) Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) Collecting typing-extensions>=3.7.4.3 Using cached typing_extensions-4.1.1-py3-none-any.whl (26 kB) Collecting semantic-version<3,>=2.8.2 Using cached semantic_version-2.9.0-py2.py3-none-any.whl (15 kB) Building wheels for collected packages: cffi Building wheel for cffi (setup.py): started Building wheel for cffi (setup.py): finished with status 'error' error: subprocess-exited-with-error × python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [36 lines of output] running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-3.9 creating build/lib.linux-armv7l-3.9/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/lock.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/error.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/model.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/api.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.9/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-3.9 creating build/temp.linux-armv7l-3.9/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.9/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cffi Running setup.py clean for cffi Failed to build cffi Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi Running setup.py install for cffi: started Running setup.py install for cffi: finished with status 'error' error: subprocess-exited-with-error × Running setup.py install for cffi did not run successfully. │ exit code: 1 ╰─> [38 lines of output] running install /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_py creating build creating build/lib.linux-armv7l-3.9 creating build/lib.linux-armv7l-3.9/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/lock.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/error.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/model.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/api.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.9/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-3.9 creating build/temp.linux-armv7l-3.9/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.9/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: legacy-install-failure × Encountered error while trying to install package. ╰─> cffi note: This is an issue with the package mentioned above, not pip. hint: See above for output from the failure. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! iobroker.esphome@0.2.4 install: `npip install` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the iobroker.esphome@0.2.4 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-03-21T16_38_52_555Z-debug.log pi@raspberrypi:/opt/iobroker $Wo mache ich etwas falsch?
Die Natur braucht nicht unseren Schutz, sie braucht unsere Abwesenheit.
-
Hm.
Ich habe jetzt alles neu aufgesetzt. Backup eingespielt usw.Es kommt immer noch diese Meldungen:
pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm i iobroker.esphome@latest > iobroker.esphome@0.2.4 install /opt/iobroker/node_modules/iobroker.esphome > npip install No python_modules directory; installing pip locally if needed. Cache entry deserialization failed, entry ignored Cache entry deserialization failed, entry ignored Successfully completed pip check. Collecting esphome>=2021.8 Using cached esphome-2022.3.0-py2.py3-none-any.whl (2.2 MB) Collecting tornado>=3.2 Using cached tornado-6.1.tar.gz (497 kB) Preparing metadata (setup.py) ... done Collecting tzdata>=2021.1 Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) Collecting kconfiglib==13.7.1 Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) Collecting esptool==3.2 Using cached esptool-3.2.tar.gz (206 kB) Preparing metadata (setup.py) ... done Collecting PyYAML==6.0 Using cached PyYAML-6.0.tar.gz (124 kB) Installing build dependencies ... done Getting requirements to build wheel ... done Preparing metadata (pyproject.toml) ... done Collecting aioesphomeapi==10.8.2 Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) Collecting paho-mqtt==1.6.1 Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Preparing metadata (setup.py) ... done Collecting pyserial==3.5 Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) Collecting voluptuous==0.12.2 Using cached voluptuous-0.12.2.tar.gz (48 kB) Preparing metadata (setup.py) ... done Collecting tzlocal==4.1 Using cached tzlocal-4.1-py3-none-any.whl (19 kB) Collecting platformio==5.2.5 Using cached platformio-5.2.5.tar.gz (218 kB) Preparing metadata (setup.py) ... done Collecting zeroconf==0.38.3 Using cached zeroconf-0.38.3-py3-none-any.whl (106 kB) Collecting click==8.0.3 Using cached click-8.0.3-py3-none-any.whl (97 kB) Collecting colorama==0.4.4 Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting esphome-dashboard==20220309.0 Using cached esphome_dashboard-20220309.0-py3-none-any.whl (593 kB) Collecting noiseprotocol<1.0,>=0.3.1 Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) Collecting protobuf<4.0,>=3.12.2 Using cached protobuf-3.19.4-py2.py3-none-any.whl (162 kB) Collecting bitstring>=3.1.6 Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) Collecting cryptography>=2.1.4 Using cached cryptography-36.0.2.tar.gz (572 kB) Installing build dependencies ... error error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> [122 lines of output] Collecting setuptools>=40.6.0 Using cached setuptools-60.10.0-py3-none-any.whl (1.1 MB) Collecting wheel Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB) Collecting cffi>=1.12 Using cached cffi-1.15.0.tar.gz (484 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting setuptools-rust>=0.11.4 Using cached setuptools_rust-1.1.2-py3-none-any.whl (21 kB) Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) Collecting typing-extensions>=3.7.4.3 Using cached typing_extensions-4.1.1-py3-none-any.whl (26 kB) Collecting semantic-version<3,>=2.8.2 Using cached semantic_version-2.9.0-py2.py3-none-any.whl (15 kB) Building wheels for collected packages: cffi Building wheel for cffi (setup.py): started Building wheel for cffi (setup.py): finished with status 'error' error: subprocess-exited-with-error × python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [36 lines of output] running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-3.9 creating build/lib.linux-armv7l-3.9/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/lock.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/error.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/model.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/api.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.9/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-3.9 creating build/temp.linux-armv7l-3.9/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.9/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cffi Running setup.py clean for cffi Failed to build cffi Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi Running setup.py install for cffi: started Running setup.py install for cffi: finished with status 'error' error: subprocess-exited-with-error × Running setup.py install for cffi did not run successfully. │ exit code: 1 ╰─> [38 lines of output] running install /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_py creating build creating build/lib.linux-armv7l-3.9 creating build/lib.linux-armv7l-3.9/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/lock.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/error.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/model.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/api.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-3.9/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.9/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-3.9 creating build/temp.linux-armv7l-3.9/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.9/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: legacy-install-failure × Encountered error while trying to install package. ╰─> cffi note: This is an issue with the package mentioned above, not pip. hint: See above for output from the failure. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! iobroker.esphome@0.2.4 install: `npip install` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the iobroker.esphome@0.2.4 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-03-21T16_38_52_555Z-debug.log pi@raspberrypi:/opt/iobroker $Wo mache ich etwas falsch?
@beowolf sagte in [ESPHome] Beta release:
Wo mache ich etwas falsch?
Wie ist denn python jetzt installiert?
python --version python3 --version apt policy python3-pip apt policy python3-cffi -
@beowolf sagte in [ESPHome] Beta release:
Wo mache ich etwas falsch?
Wie ist denn python jetzt installiert?
python --version python3 --version apt policy python3-pip apt policy python3-cffipi@raspberrypi:/opt/iobroker $ python --version Python 3.9.2 pi@raspberrypi:/opt/iobroker $ python3 --version Python 3.9.2 pi@raspberrypi:/opt/iobroker $ apt policy python3-pip python3-pip: Installiert: (keine) Installationskandidat: 20.3.4-4+rpt1 Versionstabelle: 20.3.4-4+rpt1 500 500 http://archive.raspberrypi.org/debian bullseye/main armhf Packages 20.3.4-4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages pi@raspberrypi:/opt/iobroker $ apt policy python3-cffi python3-cffi: Installiert: (keine) Installationskandidat: 1.14.5-1 Versionstabelle: 1.14.5-1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages pi@raspberrypi:/opt/iobroker $Die Natur braucht nicht unseren Schutz, sie braucht unsere Abwesenheit.
-
pi@raspberrypi:/opt/iobroker $ python --version Python 3.9.2 pi@raspberrypi:/opt/iobroker $ python3 --version Python 3.9.2 pi@raspberrypi:/opt/iobroker $ apt policy python3-pip python3-pip: Installiert: (keine) Installationskandidat: 20.3.4-4+rpt1 Versionstabelle: 20.3.4-4+rpt1 500 500 http://archive.raspberrypi.org/debian bullseye/main armhf Packages 20.3.4-4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages pi@raspberrypi:/opt/iobroker $ apt policy python3-cffi python3-cffi: Installiert: (keine) Installationskandidat: 1.14.5-1 Versionstabelle: 1.14.5-1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages pi@raspberrypi:/opt/iobroker $Ich vermute python3-pip sollte mindestens installiert sein.
-
Ich vermute python3-pip sollte mindestens installiert sein.
Ich habe es hier mit versucht.
sudo apt-get --reinstall install python3-pip
Kein Erfolg
pi@raspberrypi:/ $ python3 -V Python 3.9.2 pi@raspberrypi:/ $ pip3 -V pip 20.3.4 from /usr/lib/python3/dist-packages/pip (python 3.9)Die Natur braucht nicht unseren Schutz, sie braucht unsere Abwesenheit.
-
Ich habe es hier mit versucht.
sudo apt-get --reinstall install python3-pip
Kein Erfolg
pi@raspberrypi:/ $ python3 -V Python 3.9.2 pi@raspberrypi:/ $ pip3 -V pip 20.3.4 from /usr/lib/python3/dist-packages/pip (python 3.9)sudo apt update sudo apt install python3-pip -
sudo apt update sudo apt install python3-pipAsche auf mein Haupt - Hin und wieder ein reboot und alles geht.
-
Ich hab meinen Servo, der bisher nur die Level Variable hat eingebunden.
Das ist das esp script:
esphome: name: little_wemos platform: ESP8266 board: d1_mini wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Little Wemos Fallback Hotspot" password: "************" captive_portal: # Enable logging logger: api: services: - service: control_servo variables: level: float then: - servo.write: id: my_servo level: !lambda 'return level / 1000.0;' ota: output: - platform: esp8266_pwm id: pwm_output pin: D3 frequency: 50 Hz servo: - id: my_servo output: pwm_outputDas ist das Debug Log hierzu.
esphome.0 2022-03-17 15:42:40.693 debug Create_state called for : C45BBEDDA7E1.info._online with value : true esphome.0 2022-03-17 15:42:40.661 debug MODIFY to hasDeepSleep: "" esphome.0 2022-03-17 15:42:40.660 debug Create_state called for : C45BBEDDA7E1.info.hasDeepSleep with value : false esphome.0 2022-03-17 15:42:40.660 debug create id C45BBEDDA7E1.info.hasDeepSleep with value false and name hasDeepSleep esphome.0 2022-03-17 15:42:40.598 debug MODIFY to model: "" esphome.0 2022-03-17 15:42:40.597 debug Create_state called for : C45BBEDDA7E1.info.model with value : d1_mini esphome.0 2022-03-17 15:42:40.597 debug create id C45BBEDDA7E1.info.model with value d1_mini and name model esphome.0 2022-03-17 15:42:40.573 debug MODIFY to compilationTime: "" esphome.0 2022-03-17 15:42:40.572 debug Create_state called for : C45BBEDDA7E1.info.compilationTime with value : Mar 17 2022, 15:38:01 esphome.0 2022-03-17 15:42:40.572 debug create id C45BBEDDA7E1.info.compilationTime with value Mar 17 2022, 15:38:01 and name compilationTime esphome.0 2022-03-17 15:42:40.551 debug MODIFY to esphomeVersion: "" esphome.0 2022-03-17 15:42:40.551 debug Create_state called for : C45BBEDDA7E1.info.esphomeVersion with value : 2022.3.0 esphome.0 2022-03-17 15:42:40.550 debug create id C45BBEDDA7E1.info.esphomeVersion with value 2022.3.0 and name esphomeVersion esphome.0 2022-03-17 15:42:40.475 info ESPHome client little_wemos on ip 192.168.178.53 initialized esphome.0 2022-03-17 15:42:40.474 debug 192.168.178.53 client log ListEntitiesDoneResponse esphome.0 2022-03-17 15:42:40.472 debug 192.168.178.53 client data esphome.0 2022-03-17 15:42:40.460 debug MODIFY to macAddress: "" esphome.0 2022-03-17 15:42:40.459 debug Create_state called for : C45BBEDDA7E1.info.macAddress with value : C4:5B:BE:DD:A7:E1 esphome.0 2022-03-17 15:42:40.459 debug create id C45BBEDDA7E1.info.macAddress with value C4:5B:BE:DD:A7:E1 and name macAddress esphome.0 2022-03-17 15:42:40.436 debug MODIFY to name: "" esphome.0 2022-03-17 15:42:40.435 debug Create_state called for : C45BBEDDA7E1.info.name with value : little_wemos esphome.0 2022-03-17 15:42:40.434 debug create id C45BBEDDA7E1.info.name with value little_wemos and name name esphome.0 2022-03-17 15:42:40.430 debug 192.168.178.53 client log ListEntitiesServicesResponse esphome.0 2022-03-17 15:42:40.426 debug 192.168.178.53 client data ) control_servo>�S� level esphome.0 2022-03-17 15:42:40.406 debug MODIFY to usesPassword: "" esphome.0 2022-03-17 15:42:40.405 debug Create_state called for : C45BBEDDA7E1.info.usesPassword with value : false esphome.0 2022-03-17 15:42:40.404 debug create id C45BBEDDA7E1.info.usesPassword with value false and name usesPassword esphome.0 2022-03-17 15:42:40.384 debug 192.168.178.53 client log DeviceInfoResponse esphome.0 2022-03-17 15:42:40.380 debug DeviceInfo little_wemos: {"192.168.178.53":{"ip":"192.168.178.53","mac":"C4:5B:BE:DD:A7:E1","deviceInfo":{"usesPassword":false,"name":"little_wemos","macAddress":"C4:5B:BE:DD:A7:E1","esphomeVersion":"2022.3.0","compilationTime":"Mar 17 2022, 15:38:01","model":"d1_mini","hasDeepSleep":false},"deviceName":"C45BBEDDA7E1","deviceInfoName":"little_wemos","passWord":""}} esphome.0 2022-03-17 15:42:40.378 debug DeviceData: {"usesPassword":false,"name":"little_wemos","macAddress":"C4:5B:BE:DD:A7:E1","esphomeVersion":"2022.3.0","compilationTime":"Mar 17 2022, 15:38:01","model":"d1_mini","hasDeepSleep":false} esphome.0 2022-03-17 15:42:40.378 info ESPHome Device info received for little_wemos esphome.0 2022-03-17 15:42:40.375 debug 192.168.178.53 client data K little_wemosC4:5B:BE:DD:A7:E1"2022.3.0*Mar 17 2022, 15:38:012d1_mini esphome.0 2022-03-17 15:42:40.359 info ESPHome client 192.168.178.53 connected esphome.0 2022-03-17 15:42:40.358 debug 192.168.178.53 client log ConnectResponse esphome.0 2022-03-17 15:42:40.356 debug 192.168.178.53 client data esphome.0 2022-03-17 15:42:40.341 debug 192.168.178.53 client log HelloResponse esphome.0 2022-03-17 15:42:40.337 debug 192.168.178.53 client data 4 little_wemos (esphome v2022.3.0)" little_wemos esphome.0 2022-03-17 15:42:40.323 debug 192.168.178.53 client log PingResponse esphome.0 2022-03-17 15:42:40.320 debug 192.168.178.53 client data esphome.0 2022-03-17 15:42:40.286 debug espHomeDashboard_Process {"_events":{},"_eventsCount":0,"_maxListeners":100,"_closesNeeded":3,"_closesGot":0,"connected":false,"signalCode":null,"exitCode":null,"killed":false,"spawnfile":"npm","_handle":{"pid":16308},"spawnargs":["npm","run","-s","nopy","/opt/iobroker/node_modules/iobroker.esphome/python_modules/bin/esphome","dashboard","/opt/iobroker/iobroker-data/esphome.0"],"pid":16308,"stdin":{"connecting":false,"_hadError":false,"_parent":null,"_host":null,"_readableState":{"objectMode":false,"highWaterMark":16384,"buffer":{"head":null,"tail":null,"length":0},"length":0,"pipes":[],"flowing":null,"ended":false,"endEmitted":false,"reading":false,"sync":true,"needReadable":false,"emittedReadable":false,"readableListening":false,"resumeScheduled":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"destroyed":false,"errored":null,"closed":false,"closeEmitted":false,"defaultEncoding":"utf8","awaitDrainWriters":null,"multiAwaitDrain":false,"readingMore":false,"dataEmitted":false,"decoder":null,"encoding":null,"readable":false},"_events":{},"_eventsCount":1,"_maxListeners":100,"_writableState":{"objectMode":false,"highWaterMark":16384,"finalCalled":false,"needDrain":false,"ending":false,"ended":false,"finished":false,"destroyed":false,"decodeStrings":false,"defaultEncoding":"utf8","length":0,"writing":false,"corked":0,"sync":true,"bufferProcessing":false,"writecb":null,"writelen":0,"afterWriteTickInfo":null,"buffered":[],"bufferedIndex":0,"allBuffers":true,"allNoop":true,"pendingcb":0,"prefinished":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"errored":null,"closed":false,"closeEmitted":false},"allowHalfOpen":false,"_sockname":null,"_pendingData":null,"_pendingEncoding":"","server":null,"_server":null},"stdout":{"connecting":false,"_hadError":false,"_parent":null,"_host":null,"_readableState":{"objectMode":false,"highWaterMark":16384,"buffer":{"head":null,"tail":null,"length":0},"length":0,"pipes":[],"flowing":null,"ended":false,"endEmitted":false,"reading":true,"sync":false,"needReadable":true,"emittedReadable":false,"readableListening":false,"resumeScheduled":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"destroyed":false,"errored":null,"closed":false,"closeEmitted":false,"defaultEncoding":"utf8","awaitDrainWriters":null,"multiAwaitDrain":false,"readingMore":false,"dataEmitted":false,"decoder":null,"encoding":null},"_events":{},"_eventsCount":2,"_maxListeners":100,"_writableState":{"objectMode":false,"highWaterMark":16384,"finalCalled":false,"needDrain":false,"ending":false,"ended":false,"finished":false,"destroyed":false,"decodeStrings":false,"defaultEncoding":"utf8","length":0,"writing":false,"corked":0,"sync":true,"bufferProcessing":false,"writecb":null,"writelen":0,"afterWriteTickInfo":null,"buffered":[],"bufferedIndex":0,"allBuffers":true,"allNoop":true,"pendingcb":0,"prefinished":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"errored":null,"closed":false,"writable":false,"closeEmitted":false},"allowHalfOpen":false,"_sockname":null,"_pendingData":null,"_pendingEncoding":"","server":null,"_server":null},"stderr":{"connecting":false,"_hadError":false,"_parent":null,"_host":null,"_readableState":{"objectMode":false,"highWaterMark":16384,"buffer":{"head":null,"tail":null,"length":0},"length":0,"pipes":[],"flowing":null,"ended":false,"endEmitted":false,"reading":true,"sync":false,"needReadable":true,"emittedReadable":false,"readableListening":false,"resumeScheduled":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"destroyed":false,"errored":null,"closed":false,"closeEmitted":false,"defaultEncoding":"utf8","awaitDrainWriters":null,"multiAwaitDrain":false,"readingMore":false,"dataEmitted":false,"decoder":null,"encoding":null},"_events":{},"_eventsCount":2,"_maxListeners":100,"_writableState":{"objectMode":false,"highWaterMark":16384,"finalCalled":false,"needDrain":false,"ending":false,"ended":false,"finished":false,"destroyed":false,"decodeStrings":false,"defaultEncoding":"utf8","length":0,"writing":false,"corked":0,"sync":true,"bufferProcessing":false,"writecb":null,"writelen":0,"afterWriteTickInfo":null,"buffered":[],"bufferedIndex":0,"allBuffers":true,"allNoop":true,"pendingcb":0,"prefinished":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"errored":null,"closed":false,"writable":false,"closeEmitted":false},"allowHalfOpen":false,"_sockname":null,"_pendingData":null,"_pendingEncoding":"","server":null,"_server":null},"stdio":[{"connecting":false,"_hadError":false,"_parent":null,"_host":null,"_readableState":{"objectMode":false,"highWaterMark":16384,"buffer":{"head":null,"tail":null,"length":0},"length":0,"pipes":[],"flowing":null,"ended":false,"endEmitted":false,"reading":false,"sync":true,"needReadable":false,"emittedReadable":false,"readableListening":false,"resumeScheduled":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"destroyed":false,"errored":null,"closed":false,"closeEmitted":false,"defaultEncoding":"utf8","awaitDrainWriters":null,"multiAwaitDrain":false,"readingMore":false,"dataEmitted":false,"decoder":null,"encoding":null,"readable":false},"_events":{},"_eventsCount":1,"_maxListeners":100,"_writableState":{"objectMode":false,"highWaterMark":16384,"finalCalled":false,"needDrain":false,"ending":false,"ended":false,"finished":false,"destroyed":false,"decodeStrings":false,"defaultEncoding":"utf8","length":0,"writing":false,"corked":0,"sync":true,"bufferProcessing":false,"writecb":null,"writelen":0,"afterWriteTickInfo":null,"buffered":[],"bufferedIndex":0,"allBuffers":true,"allNoop":true,"pendingcb":0,"prefinished":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"errored":null,"closed":false,"closeEmitted":false},"allowHalfOpen":false,"_sockname":null,"_pendingData":null,"_pendingEncoding":"","server":null,"_server":null},{"connecting":false,"_hadError":false,"_parent":null,"_host":null,"_readableState":{"objectMode":false,"highWaterMark":16384,"buffer":{"head":null,"tail":null,"length":0},"length":0,"pipes":[],"flowing":null,"ended":false,"endEmitted":false,"reading":true,"sync":false,"needReadable":true,"emittedReadable":false,"readableListening":false,"resumeScheduled":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"destroyed":false,"errored":null,"closed":false,"closeEmitted":false,"defaultEncoding":"utf8","awaitDrainWriters":null,"multiAwaitDrain":false,"readingMore":false,"dataEmitted":false,"decoder":null,"encoding":null},"_events":{},"_eventsCount":2,"_maxListeners":100,"_writableState":{"objectMode":false,"highWaterMark":16384,"finalCalled":false,"needDrain":false,"ending":false,"ended":false,"finished":false,"destroyed":false,"decodeStrings":false,"defaultEncoding":"utf8","length":0,"writing":false,"corked":0,"sync":true,"bufferProcessing":false,"writecb":null,"writelen":0,"afterWriteTickInfo":null,"buffered":[],"bufferedIndex":0,"allBuffers":true,"allNoop":true,"pendingcb":0,"prefinished":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"errored":null,"closed":false,"writable":false,"closeEmitted":false},"allowHalfOpen":false,"_sockname":null,"_pendingData":null,"_pendingEncoding":"","server":null,"_server":null},{"connecting":false,"_hadError":false,"_parent":null,"_host":null,"_readableState":{"objectMode":false,"highWaterMark":16384,"buffer":{"head":null,"tail":null,"length":0},"length":0,"pipes":[],"flowing":null,"ended":false,"endEmitted":false,"reading":true,"sync":false,"needReadable":true,"emittedReadable":false,"readableListening":false,"resumeScheduled":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"destroyed":false,"errored":null,"closed":false,"closeEmitted":false,"defaultEncoding":"utf8","awaitDrainWriters":null,"multiAwaitDrain":false,"readingMore":false,"dataEmitted":false,"decoder":null,"encoding":null},"_events":{},"_eventsCount":2,"_maxListeners":100,"_writableState":{"objectMode":false,"highWaterMark":16384,"finalCalled":false,"needDrain":false,"ending":false,"ended":false,"finished":false,"destroyed":false,"decodeStrings":false,"defaultEncoding":"utf8","length":0,"writing":false,"corked":0,"sync":true,"bufferProcessing":false,"writecb":null,"writelen":0,"afterWriteTickInfo":null,"buffered":[],"bufferedIndex":0,"allBuffers":true,"allNoop":true,"pendingcb":0,"prefinished":false,"errorEmitted":false,"emitClose":false,"autoDestroy":false,"errored":null,"closed":false,"writable":false,"closeEmitted":false},"allowHalfOpen":false,"_sockname":null,"_pendingData":null,"_pendingEncoding":"","server":null,"_server":null}]} esphome.0 2022-03-17 15:42:40.272 info Native Integration of ESPHome Dashboard enabled esphome.0 2022-03-17 15:42:40.268 info Auto Discovery startet, new devices (or IP changes) will be detected automaticallyWenn ich lediglich ein Script über 1 oder 2 Template Buttons
https://esphome.io/components/button/template.html
starten möchte und die gesamte restliche Logik und Variablen etc direkt auf dem ESP platziere, was benötigst du dann an Informationen?
Gruß
maxpdRaspi 4 8gb | iobroker + pivccu3 | 46 Adapter | 68 Scripte, 120 Devices
-
Wenn ich lediglich ein Script über 1 oder 2 Template Buttons
https://esphome.io/components/button/template.html
starten möchte und die gesamte restliche Logik und Variablen etc direkt auf dem ESP platziere, was benötigst du dann an Informationen?
@maxpd sagte in [ESPHome] Beta release:
starten möchte und die gesamte restliche Logik und Variablen etc direkt auf dem ESP platziere, was benötigst du dann an Informationen?
ich glaube nix :) die frage ist ob ein template Button Exposed wird.
Mal mal bitte einen in der yaml (kan ich später erst probieren) und schaue was passiert.We der wert Pere Opi uebertragen wird koennen 2 Sachen passieren:
- die daten passen in die jetzigen Adapter code
- es ist eine neue, unbekannte entity
Beim zweiten fall wuerde eine fehler/warnung in ioBroker log sichtbar sein und die infos brauche ich dan
-
@maxpd sagte in [ESPHome] Beta release:
starten möchte und die gesamte restliche Logik und Variablen etc direkt auf dem ESP platziere, was benötigst du dann an Informationen?
ich glaube nix :) die frage ist ob ein template Button Exposed wird.
Mal mal bitte einen in der yaml (kan ich später erst probieren) und schaue was passiert.We der wert Pere Opi uebertragen wird koennen 2 Sachen passieren:
- die daten passen in die jetzigen Adapter code
- es ist eine neue, unbekannte entity
Beim zweiten fall wuerde eine fehler/warnung in ioBroker log sichtbar sein und die infos brauche ich dan
@dutchman Ich glaube dir hat die Spracheingabe den Text ein bissl versämmelt :D
Aber ich hab die yaml hier gebaut
esphome: name: little_wemos platform: ESP8266 board: d1_mini wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Little Wemos Fallback Hotspot" password: "************" captive_portal: # Enable logging logger: api: services: - service: control_servo variables: level: float then: - servo.write: id: my_servo level: !lambda 'return level / 100.0;' ota: output: - platform: esp8266_pwm id: pwm_output pin: D3 frequency: 50 Hz servo: - id: my_servo output: pwm_output button: - platform: template name: "Template Button" on_press: - logger.log: Button Pressed - cover.open: flying - delay: 8s - cover.close: flying - delay: 9s cover: - platform: time_based id: flying open_action: # then: - servo.write: id: my_servo level: 10.0% open_duration: 5s close_action: # then: - servo.write: id: my_servo level: -10.0% close_duration: 6s stop_action: # then: - servo.write: id: my_servo level: 0% - servo.detach: my_servound bekomme die Ausgabe. Wobei mein wemos plötzlich immer disconnected. Liegt eventuell am Update auf die 2022.03?
esphome.0 2022-03-22 20:14:42.592 debug 192.168.178.53 client data 4 little_wemos (esphome v2022.3.0)" little_wemos esphome.0 2022-03-22 20:14:42.575 error ESPHome client 192.168.178.53 TypeError: Cannot read property 'deserializeBinary' of undefined esphome.0 2022-03-22 20:14:42.574 debug 192.168.178.53 client data esphome.0 2022-03-22 20:14:13.912 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:13,912 INFO 304 GET /devices (192.168.178.146) 1.62ms esphome.0 2022-03-22 20:14:12.535 warn Client 192.168.178.53 Timeout, connection Lost, will reconnect automatically when device is available! esphome.0 2022-03-22 20:14:09.061 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:09,061 INFO Running command 'esphome --dashboard -q vscode --ace /opt/iobroker/iobroker-data/esphome.0' esphome.0 2022-03-22 20:14:08.989 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,989 INFO 101 GET /ace (192.168.178.146) 1.17ms esphome.0 2022-03-22 20:14:08.971 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,970 INFO 200 GET /static/fonts/material-icons/MaterialIcons-Regular.woff2 (192.168.178.146) 1.87ms esphome.0 2022-03-22 20:14:08.913 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,913 INFO 304 GET /devices (192.168.178.146) 1.58ms esphome.0 2022-03-22 20:14:08.877 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,876 INFO 200 GET /static/js/vendor/ace/mode-yaml.js (192.168.178.146) 2.07ms esphome.0 2022-03-22 20:14:08.874 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,873 INFO 200 GET /static/js/vendor/ace/theme-dreamweaver.js (192.168.178.146) 1.69ms esphome.0 2022-03-22 20:14:08.696 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,696 INFO 200 GET /static/js/vendor/jquery-ui/jquery-ui.min.js?hash=cab3392d (192.168.178.146) 189.47ms esphome.0 2022-03-22 20:14:08.666 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,666 INFO 200 GET /static/js/vendor/materialize/materialize.min.js?hash=4be20daf (192.168.178.146) 158.14ms esphome.0 2022-03-22 20:14:08.636 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,635 INFO 200 GET /static/js/esphome/index-92d154f2.js (192.168.178.146) 114.09ms esphome.0 2022-03-22 20:14:08.633 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,633 INFO 200 GET /static/js/vendor/ace/ace.js?hash=65322f49 (192.168.178.146) 124.26ms esphome.0 2022-03-22 20:14:08.516 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,515 INFO 200 GET /static/js/vendor/jquery-validate/jquery.validate.min.js?hash=aad785d4 (192.168.178.146) 8.16ms esphome.0 2022-03-22 20:14:08.511 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,511 INFO 200 GET /static/js/vendor/jquery/jquery.min.js?hash=12108007 (192.168.178.146) 5.14ms esphome.0 2022-03-22 20:14:08.462 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,461 INFO 200 GET /static/css/esphome-2.css?hash=b79b4733 (192.168.178.146) 7.20ms esphome.0 2022-03-22 20:14:08.459 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,459 INFO 200 GET /static/css/vendor/materialize/materialize.min.css?hash=ec1df3ba (192.168.178.146) 5.40ms esphome.0 2022-03-22 20:14:08.452 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,450 INFO 200 GET /static/fonts/material-icons/material-icons.css?hash=ead4c276 (192.168.178.146) 3.75ms esphome.0 2022-03-22 20:14:08.449 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,449 INFO 200 GET /static/fonts/material-icons/MaterialIcons-Regular.woff2?hash=570eb838 (192.168.178.146) 2.71ms esphome.0 2022-03-22 20:14:08.412 debug esphome.0 (13292) [ESPHome - Console] 2022-03-22 20:14:08,411 INFO 304 GET /?instance=0&newReact=true&0&react=colored (192.168.178.146) 2.16ms esphome.0 2022-03-22 20:14:07.562 error ESPHome client 192.168.178.53 TypeError: Cannot read property 'deserializeBinary' of undefined esphome.0 2022-03-22 20:14:07.561 debug 192.168.178.53 client data 4 little_wemos (esphome v2022.3.0)" little_wemos esphome.0 2022-03-22 20:14:07.543 error ESPHome client 192.168.178.53 TypeError: Cannot read property 'deserializeBinary' of undefined esphome.0 2022-03-22 20:14:07.542 debug 192.168.178.53 client data esphome.0 2022-03-22 20:13:37.521 warn Client 192.168.178.53 Timeout, connection Lost, will reconnect automatically when device is available!
Support us
789
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge