Gosund SP1 auf Tasmota - Keine Aktualisierung
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 wenn du mqtt nicht weiter benutzt, bzw grad nicht brauchst, dann änder den port dort und lass deinen sonoff Port so wie er ist, dann ersparst dir das komplette umstellen deiner bisher genutzten sonoff's
für eins 1883, fürs andere 1885, welchen du für was benutzt, ist dir überlassen, nur beide den gleichen dürfen sie nicht verwenden.
Port 1884 muss frei bleiben(wird anderweitig benutzt)Okay.... jetzt habe ich wohl ein Problem, ich bin am Umbauen und habe hier schon 5 Minis und 2 Shelly1 die alle schon Eingerichte sind und wie die anderen auch auf Port 1883 laufen und so wie es aussieht die 3 SP1er auf .. naja Port 1885.
Wenn ich das richtig verstehe könnte ich jetzt den "zweiten" Mqtt Adapter aktivieren und Ihn auf Port 1885 stellen und die drei Sp1er auch... gut.... aber dann bekommen ich doch wieder nur diese nichts Sagenden Mqtt Einträge ohne Werte der Dosen.... oder?@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
5 Minis und 2 Shelly1 die alle schon Eingerichte sind und wie die anderen auch auf Port 1883
???? ich glaub bei dir passt mal gar nix zusammen
umgestiegen von Proxmox auf Unraid
-
@Master67 stell deinen mqtt port um und schalte die Instanz aus. Stoppe deine sonoff Instanz und lösche deine Steckdose aus den Objekten und starte danach die Instanz wieder. Dann sollte alles richtig angezeigt werden
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 stell deinen mqtt port um und schalte die Instanz aus. Stoppe deine sonoff Instanz und lösche deine Steckdose aus den Objekten und starte danach die Instanz wieder. Dann sollte alles richtig angezeigt werden
Wenn ich das mache muss ich die 10 Dosen ändern und die Geräte die noch nicht verbaut sind.. oder?
Macht für mich keinen wirklichen Sinn? ehr Frage ich mich ob ich die Dosen zurück zu Tuya bekomme :-)Gruß Master67
-
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
5 Minis und 2 Shelly1 die alle schon Eingerichte sind und wie die anderen auch auf Port 1883
???? ich glaub bei dir passt mal gar nix zusammen
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
5 Minis und 2 Shelly1 die alle schon Eingerichte sind und wie die anderen auch auf Port 1883
???? ich glaub bei dir passt mal gar nix zusammen
Naja... seit zwei Jahren kein Probleme mit dem Port 1883 :-)
Gruß Master67
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 stell deinen mqtt port um und schalte die Instanz aus. Stoppe deine sonoff Instanz und lösche deine Steckdose aus den Objekten und starte danach die Instanz wieder. Dann sollte alles richtig angezeigt werden
Wenn ich das mache muss ich die 10 Dosen ändern und die Geräte die noch nicht verbaut sind.. oder?
Macht für mich keinen wirklichen Sinn? ehr Frage ich mich ob ich die Dosen zurück zu Tuya bekomme :-)@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885umgestiegen von Proxmox auf Unraid
-
@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885hat nicht mqtt Adapter default 1883 ?
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
5 Minis und 2 Shelly1 die alle schon Eingerichte sind und wie die anderen auch auf Port 1883
???? ich glaub bei dir passt mal gar nix zusammen
Naja... seit zwei Jahren kein Probleme mit dem Port 1883 :-)
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
umgestiegen von Proxmox auf Unraid
-
@Ralla66 wenn sonoff frisch geflasht wird, ist 1883 voreingestellt
umgestiegen von Proxmox auf Unraid
-
@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885und @Ralla66 Ralla66.... ja genau Default 1883 Sonoff.... diesen Bescheuerten "mqtt-client" Adapert hatte ich mal vor einem Jahr installiert, bitte Fragt nicht warum ich weiß es auch nicht mehr so genau, aber was ich mir damals davon erhofft hatte klappte nicht und deshalb war er deaktiviert.
Ich glaube ich hatte den jetzt wieder kurz Aktiviert weil die Daten sich nicht geändert hatten... und sicher, dafür kenne ich mich zu gut hatte ich dann da den Port von 1885 auf 1883 geändert... was ja auch nicht Hilft, darum habe ich den mqtt Adapter auch wieder "deaktiviert"....
-
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
Wir verrennen uns jetzt, es geht nur um die 3 Gosund die nicht die Werte Aktualisieren und dort läuft Defaltu Sonoff mqtt mit Port 1883 drauf :-)
Gruß Master67
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
Wir verrennen uns jetzt, es geht nur um die 3 Gosund die nicht die Werte Aktualisieren und dort läuft Defaltu Sonoff mqtt mit Port 1883 drauf :-)
@Master67
Dann schau in der Tasmota Console nach ob Mqtt überhaupt sendet.
-
@Ralla66 hast recht, ist schon lange her:blush: , hatte damals meinen sonoff auf 1885 eingerichtet
MQTT Port - Port where the server will run (Default 1883). WebSockets will always run on port+1 (Default 1884) -
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Dann schau in der Tasmota Console nach ob Mqtt überhaupt sendet.Okay.... was muss ich Eingeben um das zu sehen?
-
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken...... :-) ja das war mir klar.... aber bei mir sieht das für den SP1 so aus (ich schau mir gleich noch die "echten" Sonoffs an)
21:30:07 MQT: stat/%topic%/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:30:07 MQT: stat/%topic%/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:30:07 MQT: stat/%topic%/STATUS5 = {"StatusNET":{"Hostname":"%topic%-0076","IPAddress":"192.168.178.XX","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"F4:CF:A2:08:E0:4C","Webserver":2,"WifiConfig":2,"WifiPower":17.0}} 21:30:07 MQT: stat/%topic%/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-HomeLab","MqttClient":"Sonoff-HomeLab","MqttUser":"olaf.himmelberg@XXX.com","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:30:07 MQT: stat/%topic%/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:30:07","Local":"2020-09-14T21:30:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:30:07 MQT: stat/%topic%/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} 21:30:07 MQT: stat/%topic%/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:30:07","ENERGY":{"TotalStartTime":"2020-09-10T13:07:47","Total":56.608,"Yesterday":13.314,"Today":11.922,"Period":1,"Power":532,"ApparentPower":594,"ReactivePower":263,"Factor":0.90,"Voltage":226,"Current":2.630}}} 21:30:07 MQT: stat/%topic%/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:30:07","Uptime":"3T05:13:48","UptimeSec":278028,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":2,"POWER":"ON","Wifi":{"APGruß Master67
-
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken...... :-) ja das war mir klar.... aber bei mir sieht das für den SP1 so aus (ich schau mir gleich noch die "echten" Sonoffs an)
21:30:07 MQT: stat/%topic%/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:30:07 MQT: stat/%topic%/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:30:07 MQT: stat/%topic%/STATUS5 = {"StatusNET":{"Hostname":"%topic%-0076","IPAddress":"192.168.178.XX","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"F4:CF:A2:08:E0:4C","Webserver":2,"WifiConfig":2,"WifiPower":17.0}} 21:30:07 MQT: stat/%topic%/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-HomeLab","MqttClient":"Sonoff-HomeLab","MqttUser":"olaf.himmelberg@XXX.com","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:30:07 MQT: stat/%topic%/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:30:07","Local":"2020-09-14T21:30:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:30:07 MQT: stat/%topic%/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} 21:30:07 MQT: stat/%topic%/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:30:07","ENERGY":{"TotalStartTime":"2020-09-10T13:07:47","Total":56.608,"Yesterday":13.314,"Today":11.922,"Period":1,"Power":532,"ApparentPower":594,"ReactivePower":263,"Factor":0.90,"Voltage":226,"Current":2.630}}} 21:30:07 MQT: stat/%topic%/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:30:07","Uptime":"3T05:13:48","UptimeSec":278028,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":2,"POWER":"ON","Wifi":{"AP@Master67 hier mal eine geflashte SWA1... Läuft schon sehr lange so :-)
t":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:03","Local":"2020-09-14T21:39:03","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:03"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:03","Uptime":"13T06:28:34","UptimeSec":1146514,"Heap":21,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-48,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@XX.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:19","Local":"2020-09-14T21:39:19","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:19"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:19","Uptime":"13T06:28:50","UptimeSec":1146530,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS = {"Status":{"Module":18,"DeviceName":"Sonoff-Lampe Büro","FriendlyName":["Sonoff-Lampe Büro"],"Topic":"Sonoff-Lampe_Büro","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"13T06:28:58","StartupUTC":"2020-09-01T14:10:29","Sleep":50,"CfgHolder":4617,"BootCount":9,"BCResetTime":"2020-08-23T10:59:38","SaveCount":122,"SaveAddress":"FA000"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"508/699"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:27","Local":"2020-09-14T21:39:27","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:27"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:27","Uptime":"13T06:28:58","UptimeSec":1146538,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}}Gruß Master67
-
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken...... :-) ja das war mir klar.... aber bei mir sieht das für den SP1 so aus (ich schau mir gleich noch die "echten" Sonoffs an)
21:30:07 MQT: stat/%topic%/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:30:07 MQT: stat/%topic%/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:30:07 MQT: stat/%topic%/STATUS5 = {"StatusNET":{"Hostname":"%topic%-0076","IPAddress":"192.168.178.XX","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"F4:CF:A2:08:E0:4C","Webserver":2,"WifiConfig":2,"WifiPower":17.0}} 21:30:07 MQT: stat/%topic%/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-HomeLab","MqttClient":"Sonoff-HomeLab","MqttUser":"olaf.himmelberg@XXX.com","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:30:07 MQT: stat/%topic%/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:30:07","Local":"2020-09-14T21:30:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:30:07 MQT: stat/%topic%/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} 21:30:07 MQT: stat/%topic%/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:30:07","ENERGY":{"TotalStartTime":"2020-09-10T13:07:47","Total":56.608,"Yesterday":13.314,"Today":11.922,"Period":1,"Power":532,"ApparentPower":594,"ReactivePower":263,"Factor":0.90,"Voltage":226,"Current":2.630}}} 21:30:07 MQT: stat/%topic%/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:30:07","Uptime":"3T05:13:48","UptimeSec":278028,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":2,"POWER":"ON","Wifi":{"AP -
@Master67 hier mal eine geflashte SWA1... Läuft schon sehr lange so :-)
t":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:03","Local":"2020-09-14T21:39:03","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:03"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:03","Uptime":"13T06:28:34","UptimeSec":1146514,"Heap":21,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-48,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@XX.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:19","Local":"2020-09-14T21:39:19","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:19"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:19","Uptime":"13T06:28:50","UptimeSec":1146530,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS = {"Status":{"Module":18,"DeviceName":"Sonoff-Lampe Büro","FriendlyName":["Sonoff-Lampe Büro"],"Topic":"Sonoff-Lampe_Büro","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"13T06:28:58","StartupUTC":"2020-09-01T14:10:29","Sleep":50,"CfgHolder":4617,"BootCount":9,"BCResetTime":"2020-08-23T10:59:38","SaveCount":122,"SaveAddress":"FA000"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"508/699"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:27","Local":"2020-09-14T21:39:27","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:27"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:27","Uptime":"13T06:28:58","UptimeSec":1146538,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}}@Master67 ..... und hier mal die von mir zurückgesetzte SP1... aber das, selbst mit dem "Finger Weg" Teil sieht nicht anders aus!
21:44:47 MQT: stat/tasmota_D03663/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:44:47","ENERGY":{"TotalStartTime":"2020-09-11T15:00:47","Total":0.496,"Yesterday":0.016,"Today":0.015,"Power":1,"ApparentPower":3,"ReactivePower":3,"Factor":0.24,"Voltage":230,"Current":0.011}}} 21:44:47 MQT: stat/tasmota_D03663/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:44:47","Uptime":"3T04:31:43","UptimeSec":275503,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Fon WLAN 7360 SL","BSSId":"9C:C7:A6:63:34:50","Channel":13,"RSSI":54,"Signal":-73,"LinkCount":1,"Downtime":"0T00:00:03"}}} 21:44:55 MQT: stat/tasmota_D03663/STATUS = {"Status":{"Module":55,"DeviceName":"Sonoff-Kino","FriendlyName":["Sonoff-Kino"],"Topic":"tasmota_D03663","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 21:44:55 MQT: stat/tasmota_D03663/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Power On","Uptime":"3T04:31:51","StartupUTC":"2020-09-11T16:13:04","Sleep":50,"CfgHolder":4617,"BootCount":21,"BCResetTime":"2020-09-11T15:00:47","SaveCount":60,"SaveAddress":"F8000"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285","CR":"476/699"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:44:55 MQT: stat/tasmota_D03663/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS5 = {"StatusNET":{"Hostname":"tasmota_D03663-5731","IPAddress":"192.168.178.xx","Gateway":"192.168.178.xx","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"DC:4F:22:D0:36:63","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:44:55 MQT: stat/tasmota_D03663/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Kino","MqttClient":"Sonoff-Kino","MqttUser":"olaf.himmelberg@xx.com","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:44:55 MQT: stat/tasmota_D03663/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:44:55","Local":"2020-09-14T21:44:55","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}Gruß Master67
-
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 und du hast immer noch TelePeriod 0
Ja.... ich kann es auch direkt umstelle... soll ich 10 oder 300 versuchen, bei der SWA1 (die läuft) ist es 300!
@Master67 zur Verbrauchsmessung brauchste schon 10....5min is sinnfrei
Support us
250
Online32.7k
Benutzer82.5k
Themen1.3m
Beiträge