Adapter: Worx Landroid v2.x.x
-
@meerkat Setze bitte den Loglevel des Adapters auf Debug, wiederhole das Setzen der Zeiten und poste hier die zeitlich dazu passenden Logdatei-Zeilen. Dann sehen wir mal weiter.
-
@hsteinme Anbei die Änderung unter Objekte und dann das Log, plus das was wieder gesetzt wurde
Dann das Update vom adapter
worx.0 2022-03-30 13:26:21.765 info undefined is not a valid state value for id "worx.0.20193020910100031279.rawMqtt.weatherdata" worx.0 2022-03-30 13:26:21.665 debug Test Status: 7 worx.0 2022-03-30 13:26:21.664 debug GET MQTT DATA from API: {"cfg":{"id":0,"lg":"it","tm":"13:26:20","dt":"30/03/2022","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["08:30",780,1],["08:30",720,0],["08:30",780,0],["09:30",780,1],["08:30",780,0],["08:30",780,0],["08:30",780,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["12:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[19,32,44,0],"mzv":[0,1,2,0,1,2,1,1,1,1],"rd":0,"sn":"20193020910100031279","al":{"lvl":0,"t":60},"tq":0,"modules":{"US":{"enabled":1},"DF":{"cut":1,"fh":1}}},"dat":{"mac":"98D86318CEA6","fw":3.26,"fwb":1,"bt":{"t":17.5,"v":19.36,"p":100,"nr":1144,"c":0,"m":0},"dmp":[1.2,4.4,351.2],"st":{"b":154893,"d":3122695,"wt":164618,"bl":170},"ls":7,"le":0,"lz":3,"rsi":-77,"lk":1,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":131,"l":131},"modules":{"US":{"stat":"ok"},"DF":{"stat":"ok"}}}} worx.0 2022-03-30 13:26:21.664 debug Worxcloud MQTT get Message for mower Johnny 5 (20193020910100031279) worx.0 2022-03-30 13:25:55.958 debug Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"} worx.0 2022-03-30 13:24:55.967 debug Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"} worx.0 2022-03-30 13:23:55.967 debug Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}Und so sieht dann mein Objekt wieder aus
-
@meerkat Solange Du so sparsam mit Zitaten aus Deiner Logdatei umgehst, sehe ich wenig Chancen, Dein Problem hier untersuchen zu können.
(1) Schalte mal probeweise "add raw data" und "enable weather data" in der Konfiguration Deiner worx Instanz aus. Bleiben jetzt Planänderungen erhalten?
(2) Falls nein: In welcher Reihenfolge hast Du die Felder borderCut, startTime und workTime geändert? Für jede dieser Änderung müsste in der Logdatei eine Sequenz der folgenden Art stehen:
- state change: ...
- Mowing time change ...
- Worxcloud MQTT sendMessage ...
- test ...
- Worxcloud MQTT get Message ...
(3) Stell dann hier bitte folgendes vollständig ab:
- diese 3 o.e. Sequenzen
- alle worx Logeinträge zwischen diesen Sequenzen
- alle worx Logeinträge in den zwei Minuten vor der ersten Sequenz
-
@hsteinme mache ich. Mehr war aber nicht protokolliert. Sonst hätte ich dir mehr gegeben
-
@hsteinme Hi, habe dir mal ein Video 20220331-084451_qYEfoG8f.mp4 beigefügt.
In der Instanz habe ich raw data und weather ausgeschaltet.worx.0 2022-03-31 08:47:04.391 debug Mower Johnny 5 (20193020910100031279) online status = true worx.0 2022-03-31 08:46:09.369 debug Test Status: 1 worx.0 2022-03-31 08:46:09.367 debug GET MQTT DATA from API: {"cfg":{"lg":"it","id":0,"dt":"31/03/2022","tm":"08:40:25","rd":0,"sn":"20193020910100031279","mz":[19,32,44,0],"mzv":[0,1,2,0,1,2,1,1,1,1],"sc":{"p":0,"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"al":{"lvl":0,"t":60},"modules":{"US":{"enabled":1}}},"dat":{"mac":"98D86318CEA6","fw":3.26,"fwb":1,"lz":4,"rsi":-61,"lk":1,"dmp":[0.3,-2.9,132.5],"st":{"b":154969,"d":3124078,"wt":164694,"bl":170},"rain":{"s":0,"cnt":0},"bt":{"t":4.4,"v":19.52,"p":100,"nr":1145,"c":0,"m":1},"le":0,"ls":1,"act":1,"conn":"wifi","modules":{"DF":{"stat":"ok"},"US":{"stat":"ok"}}}} worx.0 2022-03-31 08:46:06.749 info Autolock found! Create State : AutoLockTimer worx.0 2022-03-31 08:46:06.748 info Autolock found! Create State : AutoLock worx.0 2022-03-31 08:46:06.683 info OffLimits Module found! Create State : OLMSwitch_FastHoming worx.0 2022-03-31 08:46:06.679 info OffLimits Module found! Create State : OLMSwitch_Cutting worx.0 2022-03-31 08:46:06.456 info found torque control, create states... worx.0 2022-03-31 08:46:06.445 debug Test Status: 1 worx.0 2022-03-31 08:46:06.442 debug GET MQTT DATA from API: {"cfg":{"id":1,"lg":"it","tm":"08:46:04","dt":"31/03/2022","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[19,32,44,0],"mzv":[0,1,2,0,1,2,1,1,1,1],"rd":0,"sn":"20193020910100031279","al":{"lvl":0,"t":60},"tq":0,"modules":{"US":{"enabled":1},"DF":{"cut":1,"fh":1}}},"dat":{"mac":"98D86318CEA6","fw":3.26,"fwb":1,"bt":{"t":4.4,"v":19.5,"p":100,"nr":1145,"c":0,"m":1},"dmp":[0.3,-2.9,132.5],"st":{"b":154969,"d":3124078,"wt":164694,"bl":170},"ls":1,"le":0,"lz":4,"rsi":-61,"lk":1,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0},"modules":{"US":{"stat":"ok"},"DF":{"stat":"ok"}}}} worx.0 2022-03-31 08:46:06.433 debug Worxcloud MQTT get Message for mower Johnny 5 (20193020910100031279) worx.0 2022-03-31 08:46:04.456 debug Worxcloud MQTT subscribe to PRM100/98D86318CEA6/commandOut worx.0 2022-03-31 08:46:04.455 debug Worxcloud MQTT connected to: a1optpg91s0ydf-ats.iot.eu-west-1.amazonaws.com worx.0 2022-03-31 08:46:04.363 info found PartyModus, create states... worx.0 2022-03-31 08:46:04.361 info found OneTimeShedule, create states... worx.0 2022-03-31 08:46:04.358 info found DoubleShedule, create states... worx.0 2022-03-31 08:46:04.027 debug 2 Recieve User Devices: [{"id":288109,"product_id":52,"user_id":204067,"serial_number":"20193020910100031279","mac_address":"98D86318CEA6","name":"Johnny 5","locked":true,"firmware_version":3.26,"firmware_auto_upgrade":false,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":0,"iot_registered":true,"mqtt_registered":true,"pin_code":"ABBA","registered_at":"2019-06-04 00:00:00","online":true,"app_settings":null,"accessories":{"digital_fence":true,"ultrasonic":true},"features":{"provisionable":true,"wifi_pairing":"smartlink","tracking_firmware":true,"provisioning_replaceable":true,"rain_delay_start":3.08,"mac_address":true,"safe_go_home":3.25,"unrestricted_mowing_time":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"mqtt":true,"display_type":"lcd","input_type":"keyboard_arrow_keys","lock":true,"pin":true,"rain_delay":true,"chassis":"l_2019","one_time_scheduler":3.15,"scheduler_two_slots":3.15,"auto_lock":3.25,"digital_fence_settings":3.25,"wifi_connection":"smartlink_display"},"pending_radio_link_validation":null,"mqtt_topics":{"command_in":"PRM100/98D86318CEA6/commandIn","command_out":"PRM100/98D86318CEA6/commandOut"},"warranty_registered":true,"purchased_at":"2019-06-03 00:00:00","warranty_expires_at":"2022-06-03 00:00:00","setup_location":{"latitude":52.6601108,"longitude":8.7336641},"city":{"id":2817841,"country_id":276,"name":"Varrel","latitude":52.621498,"longitude":8.7331,"created_at":"2018-02-15 22:24:35","updated_at":"2018-02-15 22:24:35"},"time_zone":"Europe/Berlin","lawn_size":1500,"lawn_perimeter":170,"auto_schedule_settings":{"boost":0,"nutrition":null,"irrigation":true,"soil_type":"sand","grass_type":"mixed_species","exclusion_scheduler":{"exclude_nights":false,"days":[{"exclude_day":false,"slots":[{"start_time":1290,"duration":150,"reason":"generic"},{"start_time":0,"duration":450,"reason":"generic"},{"start_time":1320,"duration":120,"reason":"irrigation"},{"start_time":0,"duration":390,"reason":"irrigation"}]},{"exclude_day":false,"slots":[{"start_time":1230,"duration":210,"reason":"generic"},{"start_time":0,"duration":450,"reason":"generic"},{"start_time":1320,"duration":120,"reason":"irrigation"},{"start_time":0,"duration":390,"reason":"irrigation"}]},{"exclude_day":false,"slots":[{"start_time":1290,"duration":150,"reason":"generic"},{"start_time":0,"duration":450,"reason":"generic"},{"start_time":1320,"duration":120,"reason":"irrigation"},{"start_time":0,"duration":390,"reason":"irrigation"}]},{"exclude_day":false,"slots":[{"start_time":1290,"duration":150,"reason":"generic"},{"start_time":0,"duration":450,"reason":"generic"},{"start_time":1320,"duration":120,"reason":"irrigation"},{"start_time":0,"duration":390,"reason":"irrigation"}]},{"exclude_day":false,"slots":[{"start_time":1290,"duration":150,"reason":"generic"},{"start_time":0,"duration":450,"reason":"generic"},{"start_time":1320,"duration":120,"reason":"irrigation"},{"start_time":0,"duration":390,"reason":"irrigation"}]},{"exclude_day":false,"slots":[{"start_time":1290,"duration":150,"reason":"generic"},{"start_time":0,"duration":450,"reason":"generic"},{"start_time":1320,"duration":120,"reason":"irrigation"},{"start_time":0,"duration":390,"reason":"irrigation"}]},{"exclude_day":false,"slots":[{"start_time":1290,"duration":150,"reason":"generic"},{"start_time":0,"duration":450,"reason":"generic"},{"start_time":1320,"duration":120,"reason":"irrigation"},{"start_time":0,"duration":390,"reason":"irrigation"}]}]}},"auto_schedule":false,"distance_covered":3124078,"mower_work_time":164694,"blade_work_time":154969,"blade_work_time_reset":114083,"blade_work_time_reset_at":"2021-06-07 20:01:06","battery_charge_cycles":1145,"battery_charge_cycles_reset":null,"battery_charge_cycles_reset_at":null,"messages_in":1439,"messages_out":82924,"raw_messages_in":15890,"raw_messages_out":82924,"created_at":"2019-01-22 07:15:04","updated_at":"2021-10-11 16:11:24"}] worx.0 2022-03-31 08:46:03.750 debug 1 Recieve User Certificate worx.0 2022-03-31 08:46:03.460 debug 0 Recieve MqttServer Endpoint: a1optpg91s0ydf-ats.iot.eu-west-1.amazonaws.com worx.0 2022-03-31 08:46:03.237 debug Sucess connect to Worx Server! worx.0 2022-03-31 08:46:01.999 debug Connect to worx.... worx.0 2022-03-31 08:46:01.998 info worx is selected worx.0 2022-03-31 08:46:01.943 info starting. Version 1.5.5 in /opt/iobroker/node_modules/iobroker.worx, node: v14.19.1, js-controller: 4.0.15 worx.0 2022-03-31 08:46:01.257 debug Plugin sentry Initialize Plugin (enabled=true) worx.0 2022-03-31 08:45:53.974 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason worx.0 2022-03-31 08:45:53.973 debug Plugin sentry destroyed worx.0 2022-03-31 08:45:53.970 info terminating worx.0 2022-03-31 08:45:53.966 info cleaned everything up... worx.0 2022-03-31 08:45:53.963 info Got terminate signal TERMINATE_YOURSELF worx.0 2022-03-31 08:45:18.516 debug Mower Johnny 5 (20193020910100031279) online status = true worx.0 2022-03-31 08:44:18.475 debug Mower Johnny 5 (20193020910100031279) online status = true worx.0 2022-03-31 08:43:18.536 debug Mower Johnny 5 (20193020910100031279) online status = true worx.0 2022-03-31 08:42:18.567 debug Mower Johnny 5 (20193020910100031279) online status = true worx.0 2022-03-31 08:41:18.499 debug Mower Johnny 5 (20193020910100031279) online status = trueWas mir auffällt, es werden keine Einträge gesendet
-
@meerkat sagte in Adapter: Worx Landroid:
Hi, habe dir mal ein Video 20220331-084451_qYEfoG8f.mp4 beigefügt.
Das war eine gute Idee!
Was mir auffällt, es werden keine Einträge gesendet
Dann sag mir mal, was im Log Neues steht, wenn Du bei der Feldänderung NICHT das Häkchen für Bestätigt anklickst
-
@hsteinme Danke. Und schon funktioniert es
. Dann baue ich mein Script auch entsprechend um. -
@meerkat
Grundsätzlich kannst Du Datenpunkte mit zweierlei verschiedenen Zielsetzungen befüllen:- mit gesetztem Bestätigt-Flag: Damit aktualisierst Du lediglich den Wert im Feld (im Sinne eines Status).
- ohne gesetztes Bestätigt-Flag: Dann wird der Wert als ein Auftrag verstanden, der gegenüber dem zugehörigen Gerät auszuführen ist. In diesem Fall sendet das Gerät nach Erledigung den Wert zurück - mit gesetztem Bestätigt-Flag.
Nur im zweiten Fall sieht sich ein Adapter in der Pflicht, den Datenpunkt zum Gerät zu senden.
-
-
hat jemand schon das update von gemacht? Bei mir ging das eben in die Hose, iob nicht mehr ansprechbar.
@apollon77 seh auf git das du gerade daran arbeitest -
@crunchip Bitte 1.6.1 versuchen (und was heisst "nicht ansprechbar)?
-
@apollon77 no connection to database, drehender kreisel, hat mir das ganze log zugeballert
2022-06-17 11:42:29.981 - [32minfo[39m: host.IoBroker iobroker Update worx from @1.5.5 to @1.6.0 2022-06-17 11:42:30.431 - [32minfo[39m: host.IoBroker iobroker NPM version: 6.14.17Installing iobroker.worx@1.6.0... (System call) 2022-06-17 11:43:25.232 - [32minfo[39m: host.IoBroker iobroker > @serialport/bindings@2.0.8 install /opt/iobroker/node_modules/cc-znp/node_modules/@serialport/bindings> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild 2022-06-17 11:43:27.113 - [32minfo[39m: host.IoBroker iobroker make: Verzeichnis „/opt/iobroker/node_modules/cc-znp/node_modules/@serialport/bindings/build“ wird betreten 2022-06-17 11:43:27.124 - [32minfo[39m: host.IoBroker iobroker CXX(target) Release/obj.target/bindings/src/serialport.o 2022-06-17 11:43:28.484 - [32minfo[39m: host.IoBroker iobroker make: Verzeichnis „/opt/iobroker/node_modules/cc-znp/node_modules/@serialport/bindings/build“ wird verlassen 2022-06-17 11:43:28.503 - [32minfo[39m: host.IoBroker iobroker > @serialport/bindings@2.0.8 install /opt/iobroker/node_modules/zigbee-shepherd-converters/node_modules/@serialport/bindings> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild 2022-06-17 11:43:29.913 - [32minfo[39m: host.IoBroker iobroker make: Verzeichnis „/opt/iobroker/node_modules/zigbee-shepherd-converters/node_modules/@serialport/bindings/build“ wird betreten 2022-06-17 11:43:29.915 - [32minfo[39m: host.IoBroker iobroker CXX(target) Release/obj.target/bindings/src/serialport.o 2022-06-17 11:43:31.391 - [32minfo[39m: host.IoBroker iobroker make: Verzeichnis „/opt/iobroker/node_modules/zigbee-shepherd-converters/node_modules/@serialport/bindings/build“ wird verlassen 2022-06-17 11:43:36.567 - [32minfo[39m: host.IoBroker iobroker + iobroker.worx@1.6.0added 17 packages from 31 contributors and updated 2 packages in 65.133s 2022-06-17 11:43:41.735 - [32minfo[39m: host.IoBroker iobroker 187 packages are looking for funding 2022-06-17 11:43:41.737 - [32minfo[39m: host.IoBroker iobroker run `npm fund` for details 2022-06-17 11:43:41.965 - [32minfo[39m: host.IoBroker iobroker Update "system.adapter.worx.0" 2022-06-17 11:43:41.994 - [32minfo[39m: host.IoBroker stopInstance system.adapter.worx.0 (force=false, process=true) 2022-06-17 11:43:42.021 - [32minfo[39m: host.IoBroker stopInstance system.adapter.worx.0 send kill signal 2022-06-17 11:43:42.041 - [32minfo[39m: host.IoBroker iobroker upload [4] worx.admin /opt/iobroker/node_modules/iobroker.worx/admin/index_m.html index_m.html text/html 2022-06-17 11:43:42.533 - [32minfo[39m: host.IoBroker iobroker upload [3] worx.admin /opt/iobroker/node_modules/iobroker.worx/admin/style.css style.css text/css 2022-06-17 11:43:42.554 - [32minfo[39m: host.IoBroker iobroker upload [2] worx.admin /opt/iobroker/node_modules/iobroker.worx/admin/words.js words.js application/javascript 2022-06-17 11:43:42.627 - [32minfo[39m: host.IoBroker iobroker upload [1] worx.admin /opt/iobroker/node_modules/iobroker.worx/admin/worx.png worx.png image/png 2022-06-17 11:43:42.639 - [32minfo[39m: host.IoBroker iobroker upload [0] worx.admin /opt/iobroker/node_modules/iobroker.worx/admin/worx_ada2.png worx_ada2.png image/png 2022-06-17 11:43:42.874 - [32minfo[39m: host.IoBroker instance system.adapter.worx.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-06-17 11:43:43.923 - [32minfo[39m: host.IoBroker iobroker exit 0 2022-06-17 11:43:45.616 - [32minfo[39m: host.IoBroker instance system.adapter.worx.0 started with pid 1795320 2022-06-17 11:43:53.012 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance._events.connect is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:43:53.015 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. 2022-06-17 11:43:53.017 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance._events.found is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:43:53.017 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. 2022-06-17 11:43:53.018 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance._events.mqtt is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:43:53.019 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. 2022-06-17 11:43:53.020 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance._events.online is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:43:53.020 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. 2022-06-17 11:43:53.021 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance._events.offline is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:43:53.022 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. . . .geht so endlos weiter 2022-06-17 11:44:38.570 - [31merror[39m: worx.0 (1795320) Error: Invalid ID: worx.0.202130267110002724D6.rawMqtt.worxInstance.adapter.pluginHandler.settings.parentPackage.files.admin{,/!(src)/**}/!(tsconfig|tsconfig.*).json 2022-06-17 11:44:38.571 - [31merror[39m: worx.0 (1795320) Error: Invalid ID: worx.0.202130267110002724D6.rawMqtt.worxInstance.adapter.pluginHandler.settings.parentPackage.files.admin{,/!(src)/**}/*.{html,css,png,svg,jpg,js} 2022-06-17 11:44:55.339 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance.adapter.log.logger._events.prefinish is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:44:55.340 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. 2022-06-17 11:44:55.340 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance.adapter.log.logger._events.error is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:44:55.341 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. 2022-06-17 11:44:55.341 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance.adapter.log.logger._writableState.onwrite is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:44:55.342 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer. 2022-06-17 11:44:55.342 - [33mwarn[39m: worx.0 (1795320) Object worx.0.202130267110002724D6.rawMqtt.worxInstance.adapter.log.logger._transformState.afterTransform is invalid: obj.common.type has an invalid value (function) but has to be one of number, string, boolean, array, object, mixed, file, json 2022-06-17 11:44:55.343 - [33mwarn[39m: worx.0 (1795320) This object will not be created in future versions. Please report this to the developer.hab dann versucht den Adapter zu stoppen
iob stop worx Connection is closed. Uncaught Rejection: Error: States DB is not allowed to start in the current Mult ihost environment at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-states-redis/l ib/states/statesInRedisClient.js:579:23) at processTicksAndRejections (internal/process/task_queues.js:95:5) Unable to subscribe to expiry Keyspace events from Redis Server: Connection is closed. Unable to subscribe to evicted Keyspace events from Redis Server: Connection is closed. Unable to subscribe to meta namespace "meta." changes: Connection is closed. root@IoBroker:~# iob list instances Unable to enable Expiry Keyspace events from Redis Server: Connection is closed. Connection is closed. Uncaught Rejection: Error: States DB is not allowed to start in the current Multihost environment at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-states-redis/lib/states/statesInRedisClient.js:579:23) at processTicksAndRejections (internal/process/task_queues.js:95:5) root@IoBroker:~#dann die VM neu gestartet, iob startete aber nicht mehr, iob status zeigte irgendwas von lua script an, hab die Meldung aber nimmer, da ich das von der Proxmox Konsole aus aufgerufen hatte .
letztendlich Backup zurück gespielt
ich habe weder redis noch multihost
-
@crunchip Ja... sind schon dran .... stay tuned for 1.6.2
-
1.6.2 bitte nutzen ... Repo update kommt 14 Uhr eh
-
@apollon77 ich teste gleich
Install verlief problemlos
-
@apollon77 Danke. Läuft bislang.
Ich habe gesehen, dass der Issue bzgl. Wetter geschlossen wurde. Bei wird weiterhin jeder Datenpunkt mit (null) "bewertet". Übersehe ich hier etwas?
worx.0 2022-06-17 16:03:04.500 debug Error while get Weather: StatusCodeError: 404 - {"message":"Not Found","code":"404.000"}Danke vorab.
Hat sich glaube ich schon erledigt. Glaube das geht/ ging nur mit den "älteren" Modellen.
-
@lessthanmore ich glaube es wurde entfernt egal welcher mover.. ich hatte es gehabt.. jetzt steht da wie bei dir null.. ergo die Daten werden nicht gesendet..vom Mover
-
Hallo zusammen,
ist es eigentlich angedacht den Adapter um einige Funktionen zu erweitern wie z. Bsp. das Aktivitätenprotokoll? Würde mir das gerne in VIS und IQontrol ausgeben lassen.Gruß//Lucky
-
@lucky_esa Das Aktivitätenprotokoll ist kein Teil des Datenverkehrs zwischen Adapter und Cloud/Mäher. Also kann der Adapter sich diese Infomationen nicht abholen.
Falls Dir dieser Punkt aber wichtig ist, kannst Du Dir selbst eine Lösung "basteln", in dem Du per Skript die status und error Datenpunkte überwachst und bei besonderen Ereignissen diese in einen eigenen Datenpunkt schreibst, den Du dann mit Deiner Visualisierung abgreifen kannst.
-
@hsteinme sagte in Adapter: Worx Landroid:
@lucky_esa Das Aktivitätenprotokoll ist kein Teil des Datenverkehrs zwischen Adapter und Cloud/Mäher.
Hi hsteinme, das kann ich leider nicht bestätigen. Wenn man 2 Handys hat und dort Änderungen vornimmt, dann werden die Daten über die Cloud übermittelt.
Habe den Adapter bereits angepasst und das wären die Daten:
Ich muss mir mal überlegen wie ich die als DP anlege. Fängt schon damit an, dass ich nicht weiß ob die Anzahl an Events auf 55 beschränkt ist. Hinzu kommt das der Timestamp 2 Std. vor tm liegt...Komisch, ob das bei jedem so ist...
Gruß//Lucky
