Skip to content
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo
  1. ioBroker Community Home
  2. Deutsch
  3. Tester
  4. Test Adapter Linux Control v1.x.x

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.2k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    1.9k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    15
    1
    2.2k

Test Adapter Linux Control v1.x.x

Geplant Angeheftet Gesperrt Verschoben Tester
adaptercontrolhardwarelinuxsteuern
675 Beiträge 70 Kommentatoren 171.6k Aufrufe 64 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • HomoranH Homoran

    @liv-in-sky ich kann morgen auch meinen pivccu-Tinker und den Reserve-Tinker noch einbinden 😉

    Wenn ich die Zugangsdaten finde 😂

    Thomas BraunT Online
    Thomas BraunT Online
    Thomas Braun
    Most Active
    schrieb am zuletzt editiert von
    #62

    @Homoran

    ls -la /usr/bin/find
    

    Je nachdem kann man dann halt ein setuid bit setzen (siehe Wikipedia)

    Ausführbare Programme, bei denen dieses Bit gesetzt ist, werden zusätzlich zu den Rechten desjenigen Benutzers, der die Datei ausführt, auch mit den Rechten des Benutzers ausgeführt, dem die Datei gehört (das heißt mit den Rechten des Besitzers der Datei, des "Owners"). Auf den meisten Systemen funktioniert dies nur für ausführbare Binärdateien, nicht jedoch für interpretierte Scripts.

    Dieses Vorgehen ermöglicht unprivilegierten Benutzern und Prozessen einen kontrollierten Zugriff auf privilegierte Ressourcen.

    Das könnte bei deinem Problem der Fall sein, wenn die Meldung nicht in die Irre führt.

    Linux-Werkzeugkasten:
    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
    NodeJS Fixer Skript:
    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

    HomoranH 2 Antworten Letzte Antwort
    0
    • Thomas BraunT Thomas Braun

      @Homoran

      ls -la /usr/bin/find
      

      Je nachdem kann man dann halt ein setuid bit setzen (siehe Wikipedia)

      Ausführbare Programme, bei denen dieses Bit gesetzt ist, werden zusätzlich zu den Rechten desjenigen Benutzers, der die Datei ausführt, auch mit den Rechten des Benutzers ausgeführt, dem die Datei gehört (das heißt mit den Rechten des Besitzers der Datei, des "Owners"). Auf den meisten Systemen funktioniert dies nur für ausführbare Binärdateien, nicht jedoch für interpretierte Scripts.

      Dieses Vorgehen ermöglicht unprivilegierten Benutzern und Prozessen einen kontrollierten Zugriff auf privilegierte Ressourcen.

      Das könnte bei deinem Problem der Fall sein, wenn die Meldung nicht in die Irre führt.

      HomoranH Nicht stören
      HomoranH Nicht stören
      Homoran
      Global Moderator Administrators
      schrieb am zuletzt editiert von Homoran
      #63

      @Thomas-Braun Danke,
      teste ich morgen.

      gibt der Befehl auch den Status aus?

      Habe da aber nix selbst gebastelt.
      Wäre da Armbian oder der Installer dran "schuld"?

      Warum hab ich mich da bloß ausnahmsweise für Ubuntu entschieden? 😢

      kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

      Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

      der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

      Thomas BraunT 1 Antwort Letzte Antwort
      0
      • HomoranH Homoran

        @Thomas-Braun Danke,
        teste ich morgen.

        gibt der Befehl auch den Status aus?

        Habe da aber nix selbst gebastelt.
        Wäre da Armbian oder der Installer dran "schuld"?

        Warum hab ich mich da bloß ausnahmsweise für Ubuntu entschieden? 😢

        Thomas BraunT Online
        Thomas BraunT Online
        Thomas Braun
        Most Active
        schrieb am zuletzt editiert von Thomas Braun
        #64

        @Homoran Der Befehl ls listet die derzeitigen Rechte an der Datei auf.

        Linux-Werkzeugkasten:
        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
        NodeJS Fixer Skript:
        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

        1 Antwort Letzte Antwort
        1
        • HomoranH Homoran

          @Scrounger sagte in Test Adapter Linux Control v0.x.x:

          @Homoran
          Bitte die auch nochmal testen, hab da noch was eingebaut, was deinen fehler hoffentlich jetzt löst

          Bin nicht mehr an den PC gekommen.
          habe es vom tablet versucht

          2020-08-17 21:19:29.989 - info: linux-control.0 (10867) getting data from RasPi4 (192.168.138.139:22)
          2020-08-17 21:19:30.021 - debug: linux-control.0 (10867) [getConnection] Host 'RasPi4' (192.168.138.139:22): using sudo for authentification
          2020-08-17 21:19:30.207 - debug: linux-control.0 (10867) [distributionInfo] RasPi4 (192.168.138.139:22): send command: 'cat /etc/os-release'
          2020-08-17 21:19:30.564 - debug: linux-control.0 (10867) [distributionInfo] RasPi4 (192.168.138.139:22): response stdout: PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
          NAME="Raspbian GNU/Linux"
          VERSION_ID="10"
          VERSION="10 (buster)"
          VERSION_CODENAME=buster
          ID=raspbian
          ID_LIKE=debian
          HOME_URL="http://www.raspbian.org/"
          SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
          BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
          2020-08-17 21:19:30.601 - debug: linux-control.0 (10867) [distributionInfo] RasPi4 (192.168.138.139:22): csvToJson result: [{"prop":"PRETTY_NAME","val":"Raspbian GNU/Linux 10 (buster)"},{"prop":"NAME","val":"Raspbian GNU/Linux"},{"prop":"VERSION_ID","val":"10"},{"prop":"VERSION","val":"10 (buster)"},{"prop":"VERSION_CODENAME","val":"buster"},{"prop":"ID","val":"raspbian"},{"prop":"ID_LIKE","val":"debian"},{"prop":"HOME_URL","val":"http://www.raspbian.org/"},{"prop":"SUPPORT_URL","val":"http://www.raspbian.org/RaspbianForums"},{"prop":"BUG_REPORT_URL","val":"http://www.raspbian.org/RaspbianBugs"}]
          2020-08-17 21:19:30.616 - debug: linux-control.0 (10867) [cmdAptUpdate] RasPi4 (192.168.138.139:22): no datapoints selected -> removing existing datapoints
          2020-08-17 21:19:30.622 - debug: linux-control.0 (10867) [servicesInfo] RasPi4 (192.168.138.139:22): send command: 'systemctl list-units --type service --all --no-legend | awk '{out=""; for(i=5;i<=NF;i++){out=out" "$i}; print $1","$2","$3","$4","out}''
          2020-08-17 21:19:30.646 - debug: linux-control.0 (10867) [servicesInfo] RasPi4 (192.168.138.139:22): response stdout: alsa-restore.service,loaded,active,exited, Save/Restore Sound Card State
          alsa-state.service,loaded,active,running, Manage Sound Card State (restore and store)
          apparmor.service,not-found,inactive,dead, apparmor.service
          apt-daily-upgrade.service,loaded,inactive,dead, Daily apt upgrade and clean activities
          apt-daily.service,loaded,inactive,dead, Daily apt download activities
          auditd.service,not-found,inactive,dead, auditd.service
          auth-rpcgss-module.service,loaded,inactive,dead, Kernel Module supporting RPCSEC_GSS
          avahi-daemon.service,loaded,active,running, Avahi mDNS/DNS-SD Stack
          bluetooth.service,loaded,active,running, Bluetooth service
          bthelper@hci0.service,loaded,inactive,dead, Raspberry Pi bluetooth helper
          connman.service,not-found,inactive,dead, connman.service
          console-screen.service,not-found,inactive,dead, console-screen.service
          console-setup.service,loaded,active,exited, Set console font and keymap
          cron.service,loaded,active,running, Regular background program processing daemon
          dbus.service,loaded,active,running, D-Bus System Message Bus
          dhcpcd.service,loaded,active,running, dhcpcd on all interfaces
          display-manager.service,not-found,inactive,dead, display-manager.service
          dphys-swapfile.service,loaded,active,exited, dphys-swapfile - set up, mount/unmount, and delete a swap file
          emergency.service,loaded,inactive,dead, Emergency Shell
          fake-hwclock.service,loaded,active,exited, Restore / save the current clock
          getty-static.service,loaded,inactive,dead, getty on tty2-tty6 if dbus and logind are not available
          getty@tty1.service,loaded,active,running, Getty on tty1
          gssproxy.service,not-found,inactive,dead, gssproxy.service
          hciuart.service,loaded,active,running, Configure Bluetooth Modems connected by UART
          ifupdown-pre.service,loaded,active,exited, Helper to synchronize boot up for ifupdown
          influxdb.service,not-found,inactive,dead, influxdb.service
          iobroker.service,loaded,active,running, ioBroker Server
          kbd.service,not-found,inactive,dead, kbd.service
          keyboard-setup.service,loaded,active,exited, Set the console keyboard layout
          kmod-static-nodes.service,loaded,active,exited, Create list of required static device nodes for the current kernel
          logrotate.service,loaded,inactive,dead, Rotate log files
          man-db.service,loaded,inactive,dead, Daily man-db regeneration
          mariadb-server.service,not-found,inactive,dead, mariadb-server.service
          mountkernfs.service,masked,inactive,dead, mountkernfs.service
          mysql-server.service,not-found,inactive,dead, mysql-server.service
          networking.service,loaded,active,exited, Raise network interfaces
          NetworkManager.service,not-found,inactive,dead, NetworkManager.service
          nfs-blkmap.service,not-found,inactive,dead, nfs-blkmap.service
          nfs-config.service,loaded,inactive,dead, Preprocess NFS configuration
          nfs-server.service,not-found,inactive,dead, nfs-server.service
          nfs-utils.service,loaded,inactive,dead, NFS server and client services
          plymouth-quit-wait.service,not-found,inactive,dead, plymouth-quit-wait.service
          plymouth-start.service,not-found,inactive,dead, plymouth-start.service
          raspberrypi-net-mods.service,loaded,inactive,dead, Copy user wpa_supplicant.conf
          raspi-config.service,loaded,active,exited, LSB: Switch to ondemand cpu governor (unless shift key is pressed)
          rc-local.service,loaded,active,exited, /etc/rc.local Compatibility
          redis.service,not-found,inactive,dead, redis.service
          regenerate_ssh_host_keys.service,loaded,inactive,dead, Regenerate SSH host keys
          rescue.service,loaded,inactive,dead, Rescue Shell
          rng-tools.service,loaded,active,running, rng-tools.service
          rpc-gssd.service,loaded,inactive,dead, RPC security service for NFS client and server
          rpc-svcgssd.service,loaded,inactive,dead, RPC security service for NFS server
          rpi-eeprom-update.service,loaded,active,exited, Check for Raspberry Pi EEPROM updates
          rsync.service,loaded,inactive,dead, fast remote file copy program daemon
          rsyslog.service,loaded,active,running, System Logging Service
          ssh.service,loaded,active,running, OpenBSD Secure Shell server
          sshswitch.service,loaded,inactive,dead, Turn on SSH if /boot/ssh is present
          systemd-ask-password-console.service,loaded,inactive,dead, Dispatch Password Requests to Console
          systemd-ask-password-wall.service,loaded,inactive,dead, Forward Password Requests to Wall
          systemd-binfmt.service,loaded,inactive,dead, Set Up Additional Binary Formats
          systemd-fsck-root.service,loaded,active,exited, File System Check on Root Device
          systemd-fsck@dev-disk-by\x2dpartuuid-50fbae26\x2d01.service,loaded,active,exited, File System Check on /dev/disk/by-partuuid/50fbae26-01
          systemd-fsckd.service,loaded,inactive,dead, File System Check Daemon to report status
          systemd-hwdb-update.service,loaded,inactive,dead, Rebuild Hardware Database
          systemd-initctl.service,loaded,inactive,dead, initctl Compatibility Daemon
          systemd-journal-flush.service,loaded,active,exited, Flush Journal to Persistent Storage
          systemd-journald.service,loaded,active,running, Journal Service
          systemd-logind.service,loaded,active,running, Login Service
          systemd-machine-id-commit.service,loaded,inactive,dead, Commit a transient machine-id on disk
          systemd-modules-load.service,loaded,active,exited, Load Kernel Modules
          systemd-networkd.service,loaded,inactive,dead, Network Service
          systemd-quotacheck.service,loaded,inactive,dead, File System Quota Check
          systemd-random-seed.service,loaded,active,exited, Load/Save Random Seed
          systemd-remount-fs.service,loaded,active,exited, Remount Root and Kernel File Systems
          systemd-rfkill.service,loaded,inactive,dead, Load/Save RF Kill Switch Status
          systemd-sysctl.service,loaded,active,exited, Apply Kernel Variables
          systemd-sysusers.service,loaded,active,exited, Create System Users
          systemd-timesyncd.service,loaded,active,running, Network Time Synchronization
          systemd-tmpfiles-clean.service,loaded,inactive,dead, Cleanup of Temporary Directories
          systemd-tmpfiles-setup-dev.service,loaded,active,exited, Create Static Device Nodes in /dev
          systemd-tmpfiles-setup.service,loaded,active,exited, Create Volatile Files and Directories
          systemd-udev-trigger.service,loaded,active,exited, udev Coldplug all Devices
          systemd-udevd.service,loaded,active,running, udev Kernel Device Manager
          systemd-update-done.service,not-found,inactive,dead, systemd-update-done.service
          systemd-update-utmp-runlevel.service,loaded,inactive,dead, Update UTMP about System Runlevel Changes
          systemd-update-utmp.service,loaded,active,exited, Update UTMP about System Boot/Shutdown
          systemd-user-sessions.service,loaded,active,exited, Permit User Sessions
          systemd-vconsole-setup.service,not-found,inactive,dead, systemd-vconsole-setup.service
          triggerhappy.service,loaded,active,running, triggerhappy global hotkey daemon
          user-runtime-dir@1000.service,loaded,active,exited, User Runtime Directory /run/user/1000
          user@1000.service,loaded,active,running, User Manager for UID 1000
          wpa_supplicant.service,loaded,active,running, WPA supplicant
          2020-08-17 21:19:30.651 - debug: linux-control.0 (10867) [servicesInfo] RasPi4 (192.168.138.139:22): csvToJson result: [{"id":"alsa-restore.service","load":"loaded","active":"active","running":"exited","description":"Save/Restore Sound Card State"},{"id":"alsa-state.service","load":"loaded","active":"active","running":"running","description":"Manage Sound Card State (restore and store)"},{"id":"apparmor.service","load":"not-found","active":"inactive","running":"dead","description":"apparmor.service"},{"id":"apt-daily-upgrade.service","load":"loaded","active":"inactive","running":"dead","description":"Daily apt upgrade and clean activities"},{"id":"apt-daily.service","load":"loaded","active":"inactive","running":"dead","description":"Daily apt download activities"},{"id":"auditd.service","load":"not-found","active":"inactive","running":"dead","description":"auditd.service"},{"id":"auth-rpcgss-module.service","load":"loaded","active":"inactive","running":"dead","description":"Kernel Module supporting RPCSEC_GSS"},{"id":"avahi-daemon.service","load":"loaded","active":"active","running":"running","description":"Avahi mDNS/DNS-SD Stack"},{"id":"bluetooth.service","load":"loaded","active":"active","running":"running","description":"Bluetooth service"},{"id":"bthelper@hci0.service","load":"loaded","active":"inactive","running":"dead","description":"Raspberry Pi bluetooth helper"},{"id":"connman.service","load":"not-found","active":"inactive","running":"dead","description":"connman.service"},{"id":"console-screen.service","load":"not-found","active":"inactive","running":"dead","description":"console-screen.service"},{"id":"console-setup.service","load":"loaded","active":"active","running":"exited","description":"Set console font and keymap"},{"id":"cron.service","load":"loaded","active":"active","running":"running","description":"Regular background program processing daemon"},{"id":"dbus.service","load":"loaded","active":"active","running":"running","description":"D-Bus System Message Bus"},{"id":"dhcpcd.service","load":"loaded","active":"active","running":"running","description":"dhcpcd on all interfaces"},{"id":"display-manager.service","load":"not-found","active":"inactive","running":"dead","description":"display-manager.service"},{"id":"dphys-swapfile.service","load":"loaded","active":"active","running":"exited","description":"dphys-swapfile - set up","field6":"mount/unmount","field7":"and delete a swap file"},{"id":"emergency.service","load":"loaded","active":"inactive","running":"dead","description":"Emergency Shell"},{"id":"fake-hwclock.service","load":"loaded","active":"active","running":"exited","description":"Restore / save the current clock"},{"id":"getty-static.service","load":"loaded","active":"inactive","running":"dead","description":"getty on tty2-tty6 if dbus and logind are not available"},{"id":"getty@tty1.service","load":"loaded","active":"active","running":"running","description":"Getty on tty1"},{"id":"gssproxy.service","load":"not-found","active":"inactive","running":"dead","description":"gssproxy.service"},{"id":"hciuart.service","load":"loaded","active":"active","running":"running","description":"Configure Bluetooth Modems connected by UART"},{"id":"ifupdown-pre.service","load":"loaded","active":"active","running":"exited","description":"Helper to synchronize boot up for ifupdown"},{"id":"influxdb.service","load":"not-found","active":"inactive","running":"dead","description":"influxdb.service"},{"id":"iobroker.service","load":"loaded","active":"active","running":"running","description":"ioBroker Server"},{"id":"kbd.service","load":"not-found","active":"inactive","running":"dead","description":"kbd.service"},{"id":"keyboard-setup.service","load":"loaded","active":"active","running":"exited","description":"Set the console keyboard layout"},{"id":"kmod-static-nodes.service","load":"loaded","active":"active","running":"exited","description":"Create list of required static device nodes for the current kernel"},{"id":"logrotate.service","load":"loaded","active":"inactive","running":"dead","description":"Rotate log files"},{"id":"man-db.service","load":"loaded","active":"inactive","running":"dead","description":"Daily man-db regeneration"},{"id":"mariadb-server.service","load":"not-found","active":"inactive","running":"dead","description":"mariadb-server.service"},{"id":"mountkernfs.service","load":"masked","active":"inactive","running":"dead","description":"mountkernfs.service"},{"id":"mysql-server.service","load":"not-found","active":"inactive","running":"dead","description":"mysql-server.service"},{"id":"networking.service","load":"loaded","active":"active","running":"exited","description":"Raise network interfaces"},{"id":"NetworkManager.service","load":"not-found","active":"inactive","running":"dead","description":"NetworkManager.service"},{"id":"nfs-blkmap.service","load":"not-found","active":"inactive","running":"dead","description":"nfs-blkmap.service"},{"id":"nfs-config.service","load":"loaded","active":"inactive","running":"dead","description":"Preprocess NFS configuration"},{"id":"nfs-server.service","load":"not-found","active":"inactive","running":"dead","description":"nfs-server.service"},{"id":"nfs-utils.service","load":"loaded","active":"inactive","running":"dead","description":"NFS server and client services"},{"id":"plymouth-quit-wait.service","load":"not-found","active":"inactive","running":"dead","description":"plymouth-quit-wait.service"},{"id":"plymouth-start.service","load":"not-found","active":"inactive","running":"dead","description":"plymouth-start.service"},{"id":"raspberrypi-net-mods.service","load":"loaded","active":"inactive","running":"dead","description":"Copy user wpa_supplicant.conf"},{"id":"raspi-config.service","load":"loaded","active":"active","running":"exited","description":"LSB: Switch to ondemand cpu governor (unless shift key is pressed)"},{"id":"rc-local.service","load":"loaded","active":"active","running":"exited","description":"/etc/rc.local Compatibility"},{"id":"redis.service","load":"not-found","active":"inactive","running":"dead","description":"redis.service"},{"id":"regenerate_ssh_host_keys.service","load":"loaded","active":"inactive","running":"dead","description":"Regenerate SSH host keys"},{"id":"rescue.service","load":"loaded","active":"inactive","running":"dead","description":"Rescue Shell"},{"id":"rng-tools.service","load":"loaded","active":"active","running":"running","description":"rng-tools.service"},{"id":"rpc-gssd.service","load":"loaded","active":"inactive","running":"dead","description":"RPC security service for NFS client and server"},{"id":"rpc-svcgssd.service","load":"loaded","active":"inactive","running":"dead","description":"RPC security service for NFS server"},{"id":"rpi-eeprom-update.service","load":"loaded","active":"active","running":"exited","description":"Check for Raspberry Pi EEPROM updates"},{"id":"rsync.service","load":"loaded","active":"inactive","running":"dead","description":"fast remote file copy program daemon"},{"id":"rsyslog.service","load":"loaded","active":"active","running":"running","description":"System Logging Service"},{"id":"ssh.service","load":"loaded","active":"active","running":"running","description":"OpenBSD Secure Shell server"},{"id":"sshswitch.service","load":"loaded","active":"inactive","running":"dead","description":"Turn on SSH if /boot/ssh is present"},{"id":"systemd-ask-password-console.service","load":"loaded","active":"inactive","running":"dead","description":"Dispatch Password Requests to Console"},{"id":"systemd-ask-password-wall.service","load":"loaded","active":"inactive","running":"dead","description":"Forward Password Requests to Wall"},{"id":"systemd-binfmt.service","load":"loaded","active":"inactive","running":"dead","description":"Set Up Additional Binary Formats"},{"id":"systemd-fsck-root.service","load":"loaded","active":"active","running":"exited","description":"File System Check on Root Device"},{"id":"systemd-fsck@dev-disk-by\\x2dpartuuid-50fbae26\\x2d01.service","load":"loaded","active":"active","running":"exited","description":"File System Check on /dev/disk/by-partuuid/50fbae26-01"},{"id":"systemd-fsckd.service","load":"loaded","active":"inactive","running":"dead","description":"File System Check Daemon to report status"},{"id":"systemd-hwdb-update.service","load":"loaded","active":"inactive","running":"dead","description":"Rebuild Hardware Database"},{"id":"systemd-initctl.service","load":"loaded","active":"inactive","running":"dead","description":"initctl Compatibility Daemon"},{"id":"systemd-journal-flush.service","load":"loaded","active":"active","running":"exited","description":"Flush Journal to Persistent Storage"},{"id":"systemd-journald.service","load":"loaded","active":"active","running":"running","description":"Journal Service"},{"id":"systemd-logind.service","load":"loaded","active":"active","running":"running","description":"Login Service"},{"id":"systemd-machine-id-commit.service","load":"loaded","active":"inactive","running":"dead","description":"Commit a transient machine-id on disk"},{"id":"systemd-modules-load.service","load":"loaded","active":"active","running":"exited","description":"Load Kernel Modules"},{"id":"systemd-networkd.service","load":"loaded","active":"inactive","running":"dead","description":"Network Service"},{"id":"systemd-quotacheck.service","load":"loaded","active":"inactive","running":"dead","description":"File System Quota Check"},{"id":"systemd-random-seed.service","load":"loaded","active":"active","running":"exited","description":"Load/Save Random Seed"},{"id":"systemd-remount-fs.service","load":"loaded","active":"active","running":"exited","description":"Remount Root and Kernel File Systems"},{"id":"systemd-rfkill.service","load":"loaded","active":"inactive","running":"dead","description":"Load/Save RF Kill Switch Status"},{"id":"systemd-sysctl.service","load":"loaded","active":"active","running":"exited","description":"Apply Kernel Variables"},{"id":"systemd-sysusers.service","load":"loaded","active":"active","running":"exited","description":"Create System Users"},{"id":"systemd-timesyncd.service","load":"loaded","active":"active","running":"running","description":"Network Time Synchronization"},{"id":"systemd-tmpfiles-clean.service","load":"loaded","active":"inactive","running":"dead","description":"Cleanup of Temporary Directories"},{"id":"systemd-tmpfiles-setup-dev.service","load":"loaded","active":"active","running":"exited","description":"Create Static Device Nodes in /dev"},{"id":"systemd-tmpfiles-setup.service","load":"loaded","active":"active","running":"exited","description":"Create Volatile Files and Directories"},{"id":"systemd-udev-trigger.service","load":"loaded","active":"active","running":"exited","description":"udev Coldplug all Devices"},{"id":"systemd-udevd.service","load":"loaded","active":"active","running":"running","description":"udev Kernel Device Manager"},{"id":"systemd-update-done.service","load":"not-found","active":"inactive","running":"dead","description":"systemd-update-done.service"},{"id":"systemd-update-utmp-runlevel.service","load":"loaded","active":"inactive","running":"dead","description":"Update UTMP about System Runlevel Changes"},{"id":"systemd-update-utmp.service","load":"loaded","active":"active","running":"exited","description":"Update UTMP about System Boot/Shutdown"},{"id":"systemd-user-sessions.service","load":"loaded","active":"active","running":"exited","description":"Permit User Sessions"},{"id":"systemd-vconsole-setup.service","load":"not-found","active":"inactive","running":"dead","description":"systemd-vconsole-setup.service"},{"id":"triggerhappy.service","load":"loaded","active":"active","running":"running","description":"triggerhappy global hotkey daemon"},{"id":"user-runtime-dir@1000.service","load":"loaded","active":"active","running":"exited","description":"User Runtime Directory /run/user/1000"},{"id":"user@1000.service","load":"loaded","active":"active","running":"running","description":"User Manager for UID 1000"},{"id":"wpa_supplicant.service","load":"loaded","active":"active","running":"running","description":"WPA supplicant"}]
          2020-08-17 21:19:31.867 - debug: linux-control.0 (10867) system.adapter.admin.0: logging true
          2020-08-17 21:19:31.991 - debug: linux-control.0 (10867) [needrestart] RasPi4 (192.168.138.139:22): no datapoints selected -> removing existing datapoints
          2020-08-17 21:19:32.011 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): send command: 'sudo -S du -sk /opt/iobroker/iobroker-data/history | awk '{ print $1 /1024 }''
          2020-08-17 21:19:32.211 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): response stdout:
          197.395
          2020-08-17 21:19:32.213 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): RasPi4.folders.history.size: 197.4 MB
          2020-08-17 21:19:32.218 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): send command: 'sudo -S find /opt/iobroker/iobroker-data/history -name "*" | wc -l'
          2020-08-17 21:19:32.398 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): response stdout:
          22422
          2020-08-17 21:19:32.399 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): RasPi4.folders.history.files: 22422 Dateien
          2020-08-17 21:19:32.458 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): send command: 'tmp=$(sudo -S find /opt/iobroker/iobroker-data/history -name "*" -type f -exec stat -c "%Y %n" -- {} \; | sort -nr | head -n1 | awk '{print $2}') && date +%s -r $tmp'
          2020-08-17 21:20:00.035 - info: host.raspberrypi instance system.adapter.dwd.0 started with pid 18243
          2020-08-17 21:20:07.066 - info: dwd.0 (18243) starting. Version 2.5.0 in /opt/iobroker/node_modules/iobroker.dwd, node: v10.21.0, js-controller: 3.1.4
          2020-08-17 21:20:08.634 - info: dwd.0 (18243) Terminated (NO_ERROR): Without reason
          2020-08-17 21:20:09.148 - info: host.raspberrypi instance system.adapter.dwd.0 terminated with code 0 (NO_ERROR)
          2020-08-17 21:20:40.652 - info: hm-rpc.1 (21580) xmlrpc <- listDevices ["hm-rpc.1"]
          2020-08-17 21:20:40.820 - info: hm-rpc.1 (21580) xmlrpc -> 0 devices
          2020-08-17 21:20:41.396 - info: hm-rpc.1 (21580) xmlrpc <- newDevices 167
          2020-08-17 21:20:41.593 - info: hm-rpc.1 (21580) new HmIP devices/channels after filter: 0
          2020-08-17 21:21:10.975 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): response stdout:
          1597691863
          2020-08-17 21:21:10.979 - debug: linux-control.0 (10867) [folderSizes] RasPi4 (192.168.138.139:22): RasPi4.folders.history.lastChange: 1597691863000 -> 17.08.2020 21:17
          2020-08-17 21:21:11.029 - debug: linux-control.0 (10867) [userCommand] RasPi4 (192.168.138.139:22, id: root, description: ): send command: 'df / | grep / | awk '{ print $5}' | sed 's/%//g''
          2020-08-17 21:21:11.056 - debug: linux-control.0 (10867) [userCommand] RasPi4 (192.168.138.139:22, id: root, description: ): response stdout: 19
          2020-08-17 21:21:11.061 - debug: linux-control.0 (10867) [userCommand] RasPi4 (192.168.138.139:22, id: ip, description: ): send command: 'hostname -I | cut -d' ' -f1'
          2020-08-17 21:21:11.080 - debug: linux-control.0 (10867) [userCommand] RasPi4 (192.168.138.139:22, id: ip, description: ): response stdout: 192.168.138.139
          2020-08-17 21:21:11.089 - debug: linux-control.0 (10867) [userCommand] RasPi4 (192.168.138.139:22, id: cpu-temp, description: ): send command: 'vcgencmd measure_temp | awk '{print substr($1, length($0)-5,4)}''
          2020-08-17 21:21:11.106 - debug: linux-control.0 (10867) [userCommand] RasPi4 (192.168.138.139:22, id: cpu-temp, description: ): response stdout: 55.0
          2020-08-17 21:21:11.112 - info: linux-control.0 (10867) successful received data from RasPi4 (192.168.138.139:22)
          2020-08-17 21:21:11.113 - info: linux-control.0 (10867) getting data from NUC_VM (192.168.138.123:22)
          2020-08-17 21:21:11.145 - debug: linux-control.0 (10867) [getConnection] Host 'NUC_VM' (192.168.138.123:22): using sudo for authentification
          2020-08-17 21:21:11.204 - debug: linux-control.0 (10867) [distributionInfo] NUC_VM (192.168.138.123:22): send command: 'cat /etc/os-release'
          2020-08-17 21:21:11.265 - debug: linux-control.0 (10867) [distributionInfo] NUC_VM (192.168.138.123:22): response stdout: PRETTY_NAME="Debian GNU/Linux 10 (buster)"
          NAME="Debian GNU/Linux"
          VERSION_ID="10"
          VERSION="10 (buster)"
          VERSION_CODENAME=buster
          ID=debian
          HOME_URL="https://www.debian.org/"
          SUPPORT_URL="https://www.debian.org/support"
          BUG_REPORT_URL="https://bugs.debian.org/"
          2020-08-17 21:21:11.267 - debug: linux-control.0 (10867) [distributionInfo] NUC_VM (192.168.138.123:22): csvToJson result: [{"prop":"PRETTY_NAME","val":"Debian GNU/Linux 10 (buster)"},{"prop":"NAME","val":"Debian GNU/Linux"},{"prop":"VERSION_ID","val":"10"},{"prop":"VERSION","val":"10 (buster)"},{"prop":"VERSION_CODENAME","val":"buster"},{"prop":"ID","val":"debian"},{"prop":"HOME_URL","val":"https://www.debian.org/"},{"prop":"SUPPORT_URL","val":"https://www.debian.org/support"},{"prop":"BUG_REPORT_URL","val":"https://bugs.debian.org/"}]
          2020-08-17 21:21:11.334 - debug: linux-control.0 (10867) [cmdAptUpdate] NUC_VM (192.168.138.123:22): no datapoints selected -> removing existing datapoints
          2020-08-17 21:21:11.338 - debug: linux-control.0 (10867) [servicesInfo] NUC_VM (192.168.138.123:22): send command: 'systemctl list-units --type service --all --no-legend | awk '{out=""; for(i=5;i<=NF;i++){out=out" "$i}; print $1","$2","$3","$4","out}''
          2020-08-17 21:21:11.351 - debug: linux-control.0 (10867) [servicesInfo] NUC_VM (192.168.138.123:22): response stdout: apache2.service,loaded,active,running, The Apache HTTP Server
          apparmor.service,loaded,active,exited, Load AppArmor profiles
          apt-daily-upgrade.service,loaded,inactive,dead, Daily apt upgrade and clean activities
          apt-daily.service,loaded,inactive,dead, Daily apt download activities
          auditd.service,not-found,inactive,dead, auditd.service
          auth-rpcgss-module.service,loaded,inactive,dead, Kernel Module supporting RPCSEC_GSS
          avahi-daemon.service,loaded,active,running, Avahi mDNS/DNS-SD Stack
          clamav-daemon.service,not-found,inactive,dead, clamav-daemon.service
          connman.service,not-found,inactive,dead, connman.service
          console-screen.service,not-found,inactive,dead, console-screen.service
          console-setup.service,loaded,active,exited, Set console font and keymap
          cron.service,loaded,active,running, Regular background program processing daemon
          cups-browsed.service,loaded,failed,failed, Make remote CUPS printers available locally
          cups.service,loaded,active,running, CUPS Scheduler
          dbus.service,loaded,active,running, D-Bus System Message Bus
          display-manager.service,not-found,inactive,dead, display-manager.service
          emergency.service,loaded,inactive,dead, Emergency Shell
          exim4.service,loaded,active,running, LSB: exim Mail Transport Agent
          getty-static.service,loaded,inactive,dead, getty on tty2-tty6 if dbus and logind are not available
          getty@tty1.service,loaded,active,running, Getty on tty1
          greylist.service,not-found,inactive,dead, greylist.service
          gssproxy.service,not-found,inactive,dead, gssproxy.service
          ifup@ens18.service,loaded,active,exited, ifup for ens18
          ifupdown-pre.service,loaded,active,exited, Helper to synchronize boot up for ifupdown
          influxdb.service,not-found,inactive,dead, influxdb.service
          iobroker.service,loaded,active,running, ioBroker Server
          irqbalance.service,loaded,active,running, irqbalance daemon
          kbd.service,not-found,inactive,dead, kbd.service
          keyboard-setup.service,loaded,active,exited, Set the console keyboard layout
          kmod-static-nodes.service,loaded,active,exited, Create list of required static device nodes for the current kernel
          logrotate.service,loaded,inactive,dead, Rotate log files
          man-db.service,loaded,inactive,dead, Daily man-db regeneration
          mariadb-server.service,not-found,inactive,dead, mariadb-server.service
          mysql-server.service,not-found,inactive,dead, mysql-server.service
          mysql.service,not-found,inactive,dead, mysql.service
          networking.service,loaded,active,exited, Raise network interfaces
          NetworkManager.service,not-found,inactive,dead, NetworkManager.service
          nfs-blkmap.service,not-found,inactive,dead, nfs-blkmap.service
          nfs-config.service,loaded,inactive,dead, Preprocess NFS configuration
          nfs-server.service,not-found,inactive,dead, nfs-server.service
          nfs-utils.service,loaded,inactive,dead, NFS server and client services
          ntp.service,loaded,active,running, Network Time Service
          plymouth-quit-wait.service,not-found,inactive,dead, plymouth-quit-wait.service
          plymouth-start.service,not-found,inactive,dead, plymouth-start.service
          postgresql.service,not-found,inactive,dead, postgresql.service
          rc-local.service,loaded,inactive,dead, /etc/rc.local Compatibility
          redis.service,not-found,inactive,dead, redis.service
          rescue.service,loaded,inactive,dead, Rescue Shell
          rpc-gssd.service,loaded,inactive,dead, RPC security service for NFS client and server
          rpc-svcgssd.service,loaded,inactive,dead, RPC security service for NFS server
          rpcbind.service,loaded,active,running, RPC bind portmap service
          rsync.service,loaded,inactive,dead, fast remote file copy program daemon
          rsyslog.service,loaded,active,running, System Logging Service
          spamassassin.service,not-found,inactive,dead, spamassassin.service
          ssh.service,loaded,active,running, OpenBSD Secure Shell server
          systemd-ask-password-console.service,loaded,inactive,dead, Dispatch Password Requests to Console
          systemd-ask-password-wall.service,loaded,inactive,dead, Forward Password Requests to Wall
          systemd-binfmt.service,loaded,inactive,dead, Set Up Additional Binary Formats
          systemd-fsck-root.service,loaded,inactive,dead, File System Check on Root Device
          systemd-fsckd.service,loaded,inactive,dead, File System Check Daemon to report status
          systemd-hwdb-update.service,loaded,inactive,dead, Rebuild Hardware Database
          systemd-initctl.service,loaded,inactive,dead, initctl Compatibility Daemon
          systemd-journal-flush.service,loaded,active,exited, Flush Journal to Persistent Storage
          systemd-journald.service,loaded,active,running, Journal Service
          systemd-logind.service,loaded,active,running, Login Service
          systemd-machine-id-commit.service,loaded,inactive,dead, Commit a transient machine-id on disk
          systemd-modules-load.service,loaded,active,exited, Load Kernel Modules
          systemd-networkd.service,loaded,inactive,dead, Network Service
          systemd-random-seed.service,loaded,active,exited, Load/Save Random Seed
          systemd-remount-fs.service,loaded,active,exited, Remount Root and Kernel File Systems
          systemd-sysctl.service,loaded,active,exited, Apply Kernel Variables
          systemd-sysusers.service,loaded,active,exited, Create System Users
          systemd-timesyncd.service,loaded,inactive,dead, Network Time Synchronization
          systemd-tmpfiles-clean.service,loaded,inactive,dead, Cleanup of Temporary Directories
          systemd-tmpfiles-setup-dev.service,loaded,active,exited, Create Static Device Nodes in /dev
          systemd-tmpfiles-setup.service,loaded,active,exited, Create Volatile Files and Directories
          systemd-udev-trigger.service,loaded,active,exited, udev Coldplug all Devices
          systemd-udevd.service,loaded,active,running, udev Kernel Device Manager
          systemd-update-done.service,not-found,inactive,dead, systemd-update-done.service
          systemd-update-utmp-runlevel.service,loaded,inactive,dead, Update UTMP about System Runlevel Changes
          systemd-update-utmp.service,loaded,active,exited, Update UTMP about System Boot/Shutdown
          systemd-user-sessions.service,loaded,active,exited, Permit User Sessions
          systemd-vconsole-setup.service,not-found,inactive,dead, systemd-vconsole-setup.service
          user-runtime-dir@1000.service,loaded,active,exited, User Runtime Directory /run/user/1000
          user@1000.service,loaded,active,running, User Manager for UID 1000
          2020-08-17 21:21:11.358 - debug: linux-control.0 (10867) [servicesInfo] NUC_VM (192.168.138.123:22): csvToJson result: [{"id":"apache2.service","load":"loaded","active":"active","running":"running","description":"The Apache HTTP Server"},{"id":"apparmor.service","load":"loaded","active":"active","running":"exited","description":"Load AppArmor profiles"},{"id":"apt-daily-upgrade.service","load":"loaded","active":"inactive","running":"dead","description":"Daily apt upgrade and clean activities"},{"id":"apt-daily.service","load":"loaded","active":"inactive","running":"dead","description":"Daily apt download activities"},{"id":"auditd.service","load":"not-found","active":"inactive","running":"dead","description":"auditd.service"},{"id":"auth-rpcgss-module.service","load":"loaded","active":"inactive","running":"dead","description":"Kernel Module supporting RPCSEC_GSS"},{"id":"avahi-daemon.service","load":"loaded","active":"active","running":"running","description":"Avahi mDNS/DNS-SD Stack"},{"id":"clamav-daemon.service","load":"not-found","active":"inactive","running":"dead","description":"clamav-daemon.service"},{"id":"connman.service","load":"not-found","active":"inactive","running":"dead","description":"connman.service"},{"id":"console-screen.service","load":"not-found","active":"inactive","running":"dead","description":"console-screen.service"},{"id":"console-setup.service","load":"loaded","active":"active","running":"exited","description":"Set console font and keymap"},{"id":"cron.service","load":"loaded","active":"active","running":"running","description":"Regular background program processing daemon"},{"id":"cups-browsed.service","load":"loaded","active":"failed","running":"failed","description":"Make remote CUPS printers available locally"},{"id":"cups.service","load":"loaded","active":"active","running":"running","description":"CUPS Scheduler"},{"id":"dbus.service","load":"loaded","active":"active","running":"running","description":"D-Bus System Message Bus"},{"id":"display-manager.service","load":"not-found","active":"inactive","running":"dead","description":"display-manager.service"},{"id":"emergency.service","load":"loaded","active":"inactive","running":"dead","description":"Emergency Shell"},{"id":"exim4.service","load":"loaded","active":"active","running":"running","description":"LSB: exim Mail Transport Agent"},{"id":"getty-static.service","load":"loaded","active":"inactive","running":"dead","description":"getty on tty2-tty6 if dbus and logind are not available"},{"id":"getty@tty1.service","load":"loaded","active":"active","running":"running","description":"Getty on tty1"},{"id":"greylist.service","load":"not-found","active":"inactive","running":"dead","description":"greylist.service"},{"id":"gssproxy.service","load":"not-found","active":"inactive","running":"dead","description":"gssproxy.service"},{"id":"ifup@ens18.service","load":"loaded","active":"active","running":"exited","description":"ifup for ens18"},{"id":"ifupdown-pre.service","load":"loaded","active":"active","running":"exited","description":"Helper to synchronize boot up for ifupdown"},{"id":"influxdb.service","load":"not-found","active":"inactive","running":"dead","description":"influxdb.service"},{"id":"iobroker.service","load":"loaded","active":"active","running":"running","description":"ioBroker Server"},{"id":"irqbalance.service","load":"loaded","active":"active","running":"running","description":"irqbalance daemon"},{"id":"kbd.service","load":"not-found","active":"inactive","running":"dead","description":"kbd.service"},{"id":"keyboard-setup.service","load":"loaded","active":"active","running":"exited","description":"Set the console keyboard layout"},{"id":"kmod-static-nodes.service","load":"loaded","active":"active","running":"exited","description":"Create list of required static device nodes for the current kernel"},{"id":"logrotate.service","load":"loaded","active":"inactive","running":"dead","description":"Rotate log files"},{"id":"man-db.service","load":"loaded","active":"inactive","running":"dead","description":"Daily man-db regeneration"},{"id":"mariadb-server.service","load":"not-found","active":"inactive","running":"dead","description":"mariadb-server.service"},{"id":"mysql-server.service","load":"not-found","active":"inactive","running":"dead","description":"mysql-server.service"},{"id":"mysql.service","load":"not-found","active":"inactive","running":"dead","description":"mysql.service"},{"id":"networking.service","load":"loaded","active":"active","running":"exited","description":"Raise network interfaces"},{"id":"NetworkManager.service","load":"not-found","active":"inactive","running":"dead","description":"NetworkManager.service"},{"id":"nfs-blkmap.service","load":"not-found","active":"inactive","running":"dead","description":"nfs-blkmap.service"},{"id":"nfs-config.service","load":"loaded","active":"inactive","running":"dead","description":"Preprocess NFS configuration"},{"id":"nfs-server.service","load":"not-found","active":"inactive","running":"dead","description":"nfs-server.service"},{"id":"nfs-utils.service","load":"loaded","active":"inactive","running":"dead","description":"NFS server and client services"},{"id":"ntp.service","load":"loaded","active":"active","running":"running","description":"Network Time Service"},{"id":"plymouth-quit-wait.service","load":"not-found","active":"inactive","running":"dead","description":"plymouth-quit-wait.service"},{"id":"plymouth-start.service","load":"not-found","active":"inactive","running":"dead","description":"plymouth-start.service"},{"id":"postgresql.service","load":"not-found","active":"inactive","running":"dead","description":"postgresql.service"},{"id":"rc-local.service","load":"loaded","active":"inactive","running":"dead","description":"/etc/rc.local Compatibility"},{"id":"redis.service","load":"not-found","active":"inactive","running":"dead","description":"redis.service"},{"id":"rescue.service","load":"loaded","active":"inactive","running":"dead","description":"Rescue Shell"},{"id":"rpc-gssd.service","load":"loaded","active":"inactive","running":"dead","description":"RPC security service for NFS client and server"},{"id":"rpc-svcgssd.service","load":"loaded","active":"inactive","running":"dead","description":"RPC security service for NFS server"},{"id":"rpcbind.service","load":"loaded","active":"active","running":"running","description":"RPC bind portmap service"},{"id":"rsync.service","load":"loaded","active":"inactive","running":"dead","description":"fast remote file copy program daemon"},{"id":"rsyslog.service","load":"loaded","active":"active","running":"running","description":"System Logging Service"},{"id":"spamassassin.service","load":"not-found","active":"inactive","running":"dead","description":"spamassassin.service"},{"id":"ssh.service","load":"loaded","active":"active","running":"running","description":"OpenBSD Secure Shell server"},{"id":"systemd-ask-password-console.service","load":"loaded","active":"inactive","running":"dead","description":"Dispatch Password Requests to Console"},{"id":"systemd-ask-password-wall.service","load":"loaded","active":"inactive","running":"dead","description":"Forward Password Requests to Wall"},{"id":"systemd-binfmt.service","load":"loaded","active":"inactive","running":"dead","description":"Set Up Additional Binary Formats"},{"id":"systemd-fsck-root.service","load":"loaded","active":"inactive","running":"dead","description":"File System Check on Root Device"},{"id":"systemd-fsckd.service","load":"loaded","active":"inactive","running":"dead","description":"File System Check Daemon to report status"},{"id":"systemd-hwdb-update.service","load":"loaded","active":"inactive","running":"dead","description":"Rebuild Hardware Database"},{"id":"systemd-initctl.service","load":"loaded","active":"inactive","running":"dead","description":"initctl Compatibility Daemon"},{"id":"systemd-journal-flush.service","load":"loaded","active":"active","running":"exited","description":"Flush Journal to Persistent Storage"},{"id":"systemd-journald.service","load":"loaded","active":"active","running":"running","description":"Journal Service"},{"id":"systemd-logind.service","load":"loaded","active":"active","running":"running","description":"Login Service"},{"id":"systemd-machine-id-commit.service","load":"loaded","active":"inactive","running":"dead","description":"Commit a transient machine-id on disk"},{"id":"systemd-modules-load.service","load":"loaded","active":"active","running":"exited","description":"Load Kernel Modules"},{"id":"systemd-networkd.service","load":"loaded","active":"inactive","running":"dead","description":"Network Service"},{"id":"systemd-random-seed.service","load":"loaded","active":"active","running":"exited","description":"Load/Save Random Seed"},{"id":"systemd-remount-fs.service","load":"loaded","active":"active","running":"exited","description":"Remount Root and Kernel File Systems"},{"id":"systemd-sysctl.service","load":"loaded","active":"active","running":"exited","description":"Apply Kernel Variables"},{"id":"systemd-sysusers.service","load":"loaded","active":"active","running":"exited","description":"Create System Users"},{"id":"systemd-timesyncd.service","load":"loaded","active":"inactive","running":"dead","description":"Network Time Synchronization"},{"id":"systemd-tmpfiles-clean.service","load":"loaded","active":"inactive","running":"dead","description":"Cleanup of Temporary Directories"},{"id":"systemd-tmpfiles-setup-dev.service","load":"loaded","active":"active","running":"exited","description":"Create Static Device Nodes in /dev"},{"id":"systemd-tmpfiles-setup.service","load":"loaded","active":"active","running":"exited","description":"Create Volatile Files and Directories"},{"id":"systemd-udev-trigger.service","load":"loaded","active":"active","running":"exited","description":"udev Coldplug all Devices"},{"id":"systemd-udevd.service","load":"loaded","active":"active","running":"running","description":"udev Kernel Device Manager"},{"id":"systemd-update-done.service","load":"not-found","active":"inactive","running":"dead","description":"systemd-update-done.service"},{"id":"systemd-update-utmp-runlevel.service","load":"loaded","active":"inactive","running":"dead","description":"Update UTMP about System Runlevel Changes"},{"id":"systemd-update-utmp.service","load":"loaded","active":"active","running":"exited","description":"Update UTMP about System Boot/Shutdown"},{"id":"systemd-user-sessions.service","load":"loaded","active":"active","running":"exited","description":"Permit User Sessions"},{"id":"systemd-vconsole-setup.service","load":"not-found","active":"inactive","running":"dead","description":"systemd-vconsole-setup.service"},{"id":"user-runtime-dir@1000.service","load":"loaded","active":"active","running":"exited","description":"User Runtime Directory /run/user/1000"},{"id":"user@1000.service","load":"loaded","active":"active","running":"running","description":"User Manager for UID 1000"}]
          2020-08-17 21:21:11.811 - debug: linux-control.0 (10867) [needrestart] NUC_VM (192.168.138.123:22): no datapoints selected -> removing existing datapoints
          2020-08-17 21:21:11.829 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): send command: 'sudo -S du -sk /opt/iobroker/iobroker-data/history | awk '{ print $1 /1024 }''
          2020-08-17 21:21:12.177 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): response stdout:
          13598.2
          2020-08-17 21:21:12.181 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): NUC_VM.folders.history.size: 13598.2 MB
          2020-08-17 21:21:12.229 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): send command: 'sudo -S find /opt/iobroker/iobroker-data/history -name "*" | wc -l'
          2020-08-17 21:21:12.452 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): response stdout:
          113112
          2020-08-17 21:21:12.456 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): NUC_VM.folders.history.files: 113112 Dateien
          2020-08-17 21:21:12.509 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): send command: 'tmp=$(sudo -S find /opt/iobroker/iobroker-data/history -name "*" -type f -exec stat -c "%Y %n" -- {} \; | sort -nr | head -n1 | awk '{print $2}') && date +%s -r $tmp'
          2020-08-17 21:21:29.454 - info: info.0 (779) Popup news was read...
          2020-08-17 21:23:30.505 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): response stdout:
          1597692206
          2020-08-17 21:23:30.509 - debug: linux-control.0 (10867) [folderSizes] NUC_VM (192.168.138.123:22): NUC_VM.folders.history.lastChange: 1597692206000 -> 17.08.2020 21:23
          2020-08-17 21:23:30.559 - debug: linux-control.0 (10867) [userCommand] NUC_VM (192.168.138.123:22, id: root, description: ): send command: 'df / | grep / | awk '{ print $5}' | sed 's/%//g''
          2020-08-17 21:23:30.573 - debug: linux-control.0 (10867) [userCommand] NUC_VM (192.168.138.123:22, id: root, description: ): response stdout: 56
          2020-08-17 21:23:30.632 - debug: linux-control.0 (10867) [userCommand] NUC_VM (192.168.138.123:22, id: ip, description: ): send command: 'hostname -I | cut -d' ' -f1'
          2020-08-17 21:23:30.641 - debug: linux-control.0 (10867) [userCommand] NUC_VM (192.168.138.123:22, id: ip, description: ): response stdout: 192.168.138.123
          2020-08-17 21:23:30.648 - debug: linux-control.0 (10867) [userCommand] NUC_VM (192.168.138.123:22): datapoint-id: 'cpu-temp', description: '' -> is not enabled!
          2020-08-17 21:23:30.649 - debug: linux-control.0 (10867) [userCommand] NUC_VM (192.168.138.123:22, id: Ordner, description: ): send command: 'du -c /opt/iobroker/iobroker-data/history | tail -1 | awk '{printf $1MB}''
          2020-08-17 21:23:30.947 - debug: linux-control.0 (10867) [userCommand] NUC_VM (192.168.138.123:22, id: Ordner, description: ): response stdout: 13924604
          2020-08-17 21:23:30.952 - info: linux-control.0 (10867) successful received data from NUC_VM (192.168.138.123:22)
          2020-08-17 21:23:30.952 - info: linux-control.0 (10867) getting data from Tinker (192.168.138.74:22)
          2020-08-17 21:23:30.972 - debug: linux-control.0 (10867) [getConnection] Host 'Tinker' (192.168.138.74:22): using sudo for authentification
          2020-08-17 21:23:31.183 - debug: linux-control.0 (10867) [distributionInfo] Tinker (192.168.138.74:22): send command: 'cat /etc/os-release'
          2020-08-17 21:23:31.458 - debug: linux-control.0 (10867) [distributionInfo] Tinker (192.168.138.74:22): response stdout: NAME="Ubuntu"
          VERSION="18.04.4 LTS (Bionic Beaver)"
          ID=ubuntu
          ID_LIKE=debian
          PRETTY_NAME="Ubuntu 18.04.4 LTS"
          VERSION_ID="18.04"
          HOME_URL="https://www.ubuntu.com/"
          SUPPORT_URL="https://help.ubuntu.com/"
          BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
          PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
          VERSION_CODENAME=bionic
          UBUNTU_CODENAME=bionic
          2020-08-17 21:23:31.462 - debug: linux-control.0 (10867) [distributionInfo] Tinker (192.168.138.74:22): csvToJson result: [{"prop":"NAME","val":"Ubuntu"},{"prop":"VERSION","val":"18.04.4 LTS (Bionic Beaver)"},{"prop":"ID","val":"ubuntu"},{"prop":"ID_LIKE","val":"debian"},{"prop":"PRETTY_NAME","val":"Ubuntu 18.04.4 LTS"},{"prop":"VERSION_ID","val":"18.04"},{"prop":"HOME_URL","val":"https://www.ubuntu.com/"},{"prop":"SUPPORT_URL","val":"https://help.ubuntu.com/"},{"prop":"BUG_REPORT_URL","val":"https://bugs.launchpad.net/ubuntu/"},{"prop":"PRIVACY_POLICY_URL","val":"https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"},{"prop":"VERSION_CODENAME","val":"bionic"},{"prop":"UBUNTU_CODENAME","val":"bionic"}]
          2020-08-17 21:23:31.527 - debug: linux-control.0 (10867) [cmdAptUpdate] Tinker (192.168.138.74:22): no datapoints selected -> removing existing datapoints
          2020-08-17 21:23:31.532 - debug: linux-control.0 (10867) [servicesInfo] Tinker (192.168.138.74:22): send command: 'systemctl list-units --type service --all --no-legend | awk '{out=""; for(i=5;i<=NF;i++){out=out" "$i}; print $1","$2","$3","$4","out}''
          2020-08-17 21:23:31.555 - debug: linux-control.0 (10867) [servicesInfo] Tinker (192.168.138.74:22): response stdout: alsa-restore.service,loaded,active,exited, Save/Restore Sound Card State
          alsa-state.service,loaded,inactive,dead, Manage Sound Card State (restore and store)
          apparmor.service,not-found,inactive,dead, apparmor.service
          apt-daily-upgrade.service,loaded,inactive,dead, Daily apt upgrade and clean activities
          apt-daily.service,loaded,inactive,dead, Daily apt download activities
          armbian-firstrun-config.service,loaded,inactive,dead, Armbian first run optional user configuration
          armbian-hardware-monitor.service,loaded,active,exited, Armbian hardware monitoring
          armbian-hardware-optimize.service,loaded,active,exited, Armbian hardware optimization
          armbian-ramlog.service,loaded,active,exited, Armbian memory supported logging
          armbian-zram-config.service,loaded,active,exited, Armbian ZRAM config
          armian-ramlog.service,not-found,inactive,dead, armian-ramlog.service
          auditd.service,not-found,inactive,dead, auditd.service
          bluetooth.service,loaded,active,running, Bluetooth service
          chrony.service,loaded,active,running, chrony, an NTP client/server
          connman.service,not-found,inactive,dead, connman.service
          console-screen.service,not-found,inactive,dead, console-screen.service
          console-setup.service,loaded,active,exited, Set console font and keymap
          cpufrequtils.service,loaded,active,exited, LSB: set CPUFreq kernel parameters
          cron.service,loaded,active,running, Regular background program processing daemon
          dbus.service,loaded,active,running, D-Bus System Message Bus
          display-manager.service,not-found,inactive,dead, display-manager.service
          emergency.service,loaded,inactive,dead, Emergency Shell
          fake-hwclock.service,loaded,active,exited, Restore / save the current clock
          fstrim.service,loaded,inactive,dead, Discard unused blocks
          getty-static.service,loaded,inactive,dead, getty on tty2-tty6 if dbus and logind are not available
          getty@tty1.service,loaded,active,running, Getty on tty1
          haveged.service,loaded,active,running, Entropy daemon using the HAVEGE algorithm
          hostapd.service,loaded,active,exited, LSB: Advanced IEEE 802.11 management daemon
          influxdb.service,not-found,inactive,dead, influxdb.service
          iobroker.service,loaded,active,running, ioBroker Server
          kbd.service,not-found,inactive,dead, kbd.service
          keyboard-setup.service,loaded,active,exited, Set the console keyboard layout
          kmod-static-nodes.service,loaded,active,exited, Create list of required static device nodes for the current kernel
          loadcpufreq.service,loaded,active,exited, LSB: Load kernel modules needed to enable cpufreq scaling
          mariadb-server.service,not-found,inactive,dead, mariadb-server.service
          motd-news.service,loaded,inactive,dead, Message of the Day
          mountkernfs.service,masked,inactive,dead, mountkernfs.service
          mysql-server.service,not-found,inactive,dead, mysql-server.service
          networkd-dispatcher.service,loaded,active,running, Dispatcher daemon for systemd-networkd
          networking.service,loaded,active,exited, Raise network interfaces
          NetworkManager-wait-online.service,loaded,active,exited, Network Manager Wait Online
          NetworkManager.service,loaded,active,running, Network Manager
          ondemand.service,masked,inactive,dead, ondemand.service
          openntpd.service,not-found,inactive,dead, openntpd.service
          plymouth-quit-wait.service,not-found,inactive,dead, plymouth-quit-wait.service
          plymouth-start.service,not-found,inactive,dead, plymouth-start.service
          polkit.service,loaded,active,running, Authorization Manager
          rc-local.service,loaded,active,exited, /etc/rc.local Compatibility
          redis.service,not-found,inactive,dead, redis.service
          rescue.service,loaded,inactive,dead, Rescue Shell
          resolvconf-pull-resolved.service,loaded,inactive,dead, resolvconf-pull-resolved.service
          resolvconf.service,loaded,active,exited, Nameserver information manager
          rng-tools.service,loaded,active,running, rng-tools.service
          rsync.service,loaded,inactive,dead, fast remote file copy program daemon
          rsyslog.service,loaded,active,running, System Logging Service
          serial-getty@ttyS2.service,loaded,active,running, Serial Getty on ttyS2
          setvtrgb.service,loaded,active,exited, Set console scheme
          ssh.service,loaded,active,running, OpenBSD Secure Shell server
          sysfsutils.service,loaded,active,exited, LSB: Set sysfs variables from /etc/sysfs.conf
          sysstat.service,loaded,active,exited, Resets System Activity Data Collector
          systemd-ask-password-console.service,loaded,inactive,dead, Dispatch Password Requests to Console
          systemd-ask-password-wall.service,loaded,inactive,dead, Forward Password Requests to Wall
          systemd-binfmt.service,loaded,inactive,dead, Set Up Additional Binary Formats
          systemd-fsck-root.service,loaded,inactive,dead, File System Check on Root Device
          systemd-fsckd.service,loaded,inactive,dead, File System Check Daemon to report status
          systemd-hwdb-update.service,loaded,inactive,dead, Rebuild Hardware Database
          systemd-initctl.service,loaded,inactive,dead, /dev/initctl Compatibility Daemon
          systemd-journal-flush.service,loaded,active,exited, Flush Journal to Persistent Storage
          systemd-journald.service,loaded,active,running, Journal Service
          systemd-logind.service,loaded,active,running, Login Service
          systemd-machine-id-commit.service,loaded,inactive,dead, Commit a transient machine-id on disk
          systemd-modules-load.service,loaded,active,exited, Load Kernel Modules
          systemd-networkd.service,loaded,inactive,dead, Network Service
          systemd-random-seed.service,loaded,active,exited, Load/Save Random Seed
          systemd-remount-fs.service,loaded,active,exited, Remount Root and Kernel File Systems
          systemd-resolved.service,loaded,active,running, Network Name Resolution
          systemd-rfkill.service,loaded,inactive,dead, Load/Save RF Kill Switch Status
          systemd-sysctl.service,loaded,active,exited, Apply Kernel Variables
          systemd-sysusers.service,not-found,inactive,dead, systemd-sysusers.service
          systemd-timesyncd.service,loaded,inactive,dead, Network Time Synchronization
          systemd-tmpfiles-clean.service,loaded,inactive,dead, Cleanup of Temporary Directories
          systemd-tmpfiles-setup-dev.service,loaded,active,exited, Create Static Device Nodes in /dev
          systemd-tmpfiles-setup.service,loaded,active,exited, Create Volatile Files and Directories
          systemd-udev-trigger.service,loaded,active,exited, udev Coldplug all Devices
          systemd-udevd.service,loaded,active,running, udev Kernel Device Manager
          systemd-update-done.service,not-found,inactive,dead, systemd-update-done.service
          systemd-update-utmp-runlevel.service,loaded,inactive,dead, Update UTMP about System Runlevel Changes
          systemd-update-utmp.service,loaded,active,exited, Update UTMP about System Boot/Shutdown
          systemd-user-sessions.service,loaded,active,exited, Permit User Sessions
          systemd-vconsole-setup.service,not-found,inactive,dead, systemd-vconsole-setup.service
          tinker-bluetooth.service,loaded,active,running, Realtek H5 bluetooth support
          unattended-upgrades.service,loaded,active,running, Unattended Upgrades Shutdown
          user@1002.service,loaded,active,running, User Manager for UID 1002
          wpa_supplicant.service,loaded,active,running, WPA supplicant
          2020-08-17 21:23:31.564 - debug: linux-control.0 (10867) [servicesInfo] Tinker (192.168.138.74:22): csvToJson result: [{"id":"alsa-restore.service","load":"loaded","active":"active","running":"exited","description":"Save/Restore Sound Card State"},{"id":"alsa-state.service","load":"loaded","active":"inactive","running":"dead","description":"Manage Sound Card State (restore and store)"},{"id":"apparmor.service","load":"not-found","active":"inactive","running":"dead","description":"apparmor.service"},{"id":"apt-daily-upgrade.service","load":"loaded","active":"inactive","running":"dead","description":"Daily apt upgrade and clean activities"},{"id":"apt-daily.service","load":"loaded","active":"inactive","running":"dead","description":"Daily apt download activities"},{"id":"armbian-firstrun-config.service","load":"loaded","active":"inactive","running":"dead","description":"Armbian first run optional user configuration"},{"id":"armbian-hardware-monitor.service","load":"loaded","active":"active","running":"exited","description":"Armbian hardware monitoring"},{"id":"armbian-hardware-optimize.service","load":"loaded","active":"active","running":"exited","description":"Armbian hardware optimization"},{"id":"armbian-ramlog.service","load":"loaded","active":"active","running":"exited","description":"Armbian memory supported logging"},{"id":"armbian-zram-config.service","load":"loaded","active":"active","running":"exited","description":"Armbian ZRAM config"},{"id":"armian-ramlog.service","load":"not-found","active":"inactive","running":"dead","description":"armian-ramlog.service"},{"id":"auditd.service","load":"not-found","active":"inactive","running":"dead","description":"auditd.service"},{"id":"bluetooth.service","load":"loaded","active":"active","running":"running","description":"Bluetooth service"},{"id":"chrony.service","load":"loaded","active":"active","running":"running","description":"chrony","field6":"an NTP client/server"},{"id":"connman.service","load":"not-found","active":"inactive","running":"dead","description":"connman.service"},{"id":"console-screen.service","load":"not-found","active":"inactive","running":"dead","description":"console-screen.service"},{"id":"console-setup.service","load":"loaded","active":"active","running":"exited","description":"Set console font and keymap"},{"id":"cpufrequtils.service","load":"loaded","active":"active","running":"exited","description":"LSB: set CPUFreq kernel parameters"},{"id":"cron.service","load":"loaded","active":"active","running":"running","description":"Regular background program processing daemon"},{"id":"dbus.service","load":"loaded","active":"active","running":"running","description":"D-Bus System Message Bus"},{"id":"display-manager.service","load":"not-found","active":"inactive","running":"dead","description":"display-manager.service"},{"id":"emergency.service","load":"loaded","active":"inactive","running":"dead","description":"Emergency Shell"},{"id":"fake-hwclock.service","load":"loaded","active":"active","running":"exited","description":"Restore / save the current clock"},{"id":"fstrim.service","load":"loaded","active":"inactive","running":"dead","description":"Discard unused blocks"},{"id":"getty-static.service","load":"loaded","active":"inactive","running":"dead","description":"getty on tty2-tty6 if dbus and logind are not available"},{"id":"getty@tty1.service","load":"loaded","active":"active","running":"running","description":"Getty on tty1"},{"id":"haveged.service","load":"loaded","active":"active","running":"running","description":"Entropy daemon using the HAVEGE algorithm"},{"id":"hostapd.service","load":"loaded","active":"active","running":"exited","description":"LSB: Advanced IEEE 802.11 management daemon"},{"id":"influxdb.service","load":"not-found","active":"inactive","running":"dead","description":"influxdb.service"},{"id":"iobroker.service","load":"loaded","active":"active","running":"running","description":"ioBroker Server"},{"id":"kbd.service","load":"not-found","active":"inactive","running":"dead","description":"kbd.service"},{"id":"keyboard-setup.service","load":"loaded","active":"active","running":"exited","description":"Set the console keyboard layout"},{"id":"kmod-static-nodes.service","load":"loaded","active":"active","running":"exited","description":"Create list of required static device nodes for the current kernel"},{"id":"loadcpufreq.service","load":"loaded","active":"active","running":"exited","description":"LSB: Load kernel modules needed to enable cpufreq scaling"},{"id":"mariadb-server.service","load":"not-found","active":"inactive","running":"dead","description":"mariadb-server.service"},{"id":"motd-news.service","load":"loaded","active":"inactive","running":"dead","description":"Message of the Day"},{"id":"mountkernfs.service","load":"masked","active":"inactive","running":"dead","description":"mountkernfs.service"},{"id":"mysql-server.service","load":"not-found","active":"inactive","running":"dead","description":"mysql-server.service"},{"id":"networkd-dispatcher.service","load":"loaded","active":"active","running":"running","description":"Dispatcher daemon for systemd-networkd"},{"id":"networking.service","load":"loaded","active":"active","running":"exited","description":"Raise network interfaces"},{"id":"NetworkManager-wait-online.service","load":"loaded","active":"active","running":"exited","description":"Network Manager Wait Online"},{"id":"NetworkManager.service","load":"loaded","active":"active","running":"running","description":"Network Manager"},{"id":"ondemand.service","load":"masked","active":"inactive","running":"dead","description":"ondemand.service"},{"id":"openntpd.service","load":"not-found","active":"inactive","running":"dead","description":"openntpd.service"},{"id":"plymouth-quit-wait.service","load":"not-found","active":"inactive","running":"dead","description":"plymouth-quit-wait.service"},{"id":"plymouth-start.service","load":"not-found","active":"inactive","running":"dead","description":"plymouth-start.service"},{"id":"polkit.service","load":"loaded","active":"active","running":"running","description":"Authorization Manager"},{"id":"rc-local.service","load":"loaded","active":"active","running":"exited","description":"/etc/rc.local Compatibility"},{"id":"redis.service","load":"not-found","active":"inactive","running":"dead","description":"redis.service"},{"id":"rescue.service","load":"loaded","active":"inactive","running":"dead","description":"Rescue Shell"},{"id":"resolvconf-pull-resolved.service","load":"loaded","active":"inactive","running":"dead","description":"resolvconf-pull-resolved.service"},{"id":"resolvconf.service","load":"loaded","active":"active","running":"exited","description":"Nameserver information manager"},{"id":"rng-tools.service","load":"loaded","active":"active","running":"running","description":"rng-tools.service"},{"id":"rsync.service","load":"loaded","active":"inactive","running":"dead","description":"fast remote file copy program daemon"},{"id":"rsyslog.service","load":"loaded","active":"active","running":"running","description":"System Logging Service"},{"id":"serial-getty@ttyS2.service","load":"loaded","active":"active","running":"running","description":"Serial Getty on ttyS2"},{"id":"setvtrgb.service","load":"loaded","active":"active","running":"exited","description":"Set console scheme"},{"id":"ssh.service","load":"loaded","active":"active","running":"running","description":"OpenBSD Secure Shell server"},{"id":"sysfsutils.service","load":"loaded","active":"active","running":"exited","description":"LSB: Set sysfs variables from /etc/sysfs.conf"},{"id":"sysstat.service","load":"loaded","active":"active","running":"exited","description":"Resets System Activity Data Collector"},{"id":"systemd-ask-password-console.service","load":"loaded","active":"inactive","running":"dead","description":"Dispatch Password Requests to Console"},{"id":"systemd-ask-password-wall.service","load":"loaded","active":"inactive","running":"dead","description":"Forward Password Requests to Wall"},{"id":"systemd-binfmt.service","load":"loaded","active":"inactive","running":"dead","description":"Set Up Additional Binary Formats"},{"id":"systemd-fsck-root.service","load":"loaded","active":"inactive","running":"dead","description":"File System Check on Root Device"},{"id":"systemd-fsckd.service","load":"loaded","active":"inactive","running":"dead","description":"File System Check Daemon to report status"},{"id":"systemd-hwdb-update.service","load":"loaded","active":"inactive","running":"dead","description":"Rebuild Hardware Database"},{"id":"systemd-initctl.service","load":"loaded","active":"inactive","running":"dead","description":"/dev/initctl Compatibility Daemon"},{"id":"systemd-journal-flush.service","load":"loaded","active":"active","running":"exited","description":"Flush Journal to Persistent Storage"},{"id":"systemd-journald.service","load":"loaded","active":"active","running":"running","description":"Journal Service"},{"id":"systemd-logind.service","load":"loaded","active":"active","running":"running","description":"Login Service"},{"id":"systemd-machine-id-commit.service","load":"loaded","active":"inactive","running":"dead","description":"Commit a transient machine-id on disk"},{"id":"systemd-modules-load.service","load":"loaded","active":"active","running":"exited","description":"Load Kernel Modules"},{"id":"systemd-networkd.service","load":"loaded","active":"inactive","running":"dead","description":"Network Service"},{"id":"systemd-random-seed.service","load":"loaded","active":"active","running":"exited","description":"Load/Save Random Seed"},{"id":"systemd-remount-fs.service","load":"loaded","active":"active","running":"exited","description":"Remount Root and Kernel File Systems"},{"id":"systemd-resolved.service","load":"loaded","active":"active","running":"running","description":"Network Name Resolution"},{"id":"systemd-rfkill.service","load":"loaded","active":"inactive","running":"dead","description":"Load/Save RF Kill Switch Status"},{"id":"systemd-sysctl.service","load":"loaded","active":"active","running":"exited","description":"Apply Kernel Variables"},{"id":"systemd-sysusers.service","load":"not-found","active":"inactive","running":"dead","description":"systemd-sysusers.service"},{"id":"systemd-timesyncd.service","load":"loaded","active":"inactive","running":"dead","description":"Network Time Synchronization"},{"id":"systemd-tmpfiles-clean.service","load":"loaded","active":"inactive","running":"dead","description":"Cleanup of Temporary Directories"},{"id":"systemd-tmpfiles-setup-dev.service","load":"loaded","active":"active","running":"exited","description":"Create Static Device Nodes in /dev"},{"id":"systemd-tmpfiles-setup.service","load":"loaded","active":"active","running":"exited","description":"Create Volatile Files and Directories"},{"id":"systemd-udev-trigger.service","load":"loaded","active":"active","running":"exited","description":"udev Coldplug all Devices"},{"id":"systemd-udevd.service","load":"loaded","active":"active","running":"running","description":"udev Kernel Device Manager"},{"id":"systemd-update-done.service","load":"not-found","active":"inactive","running":"dead","description":"systemd-update-done.service"},{"id":"systemd-update-utmp-runlevel.service","load":"loaded","active":"inactive","running":"dead","description":"Update UTMP about System Runlevel Changes"},{"id":"systemd-update-utmp.service","load":"loaded","active":"active","running":"exited","description":"Update UTMP about System Boot/Shutdown"},{"id":"systemd-user-sessions.service","load":"loaded","active":"active","running":"exited","description":"Permit User Sessions"},{"id":"systemd-vconsole-setup.service","load":"not-found","active":"inactive","running":"dead","description":"systemd-vconsole-setup.service"},{"id":"tinker-bluetooth.service","load":"loaded","active":"active","running":"running","description":"Realtek H5 bluetooth support"},{"id":"unattended-upgrades.service","load":"loaded","active":"active","running":"running","description":"Unattended Upgrades Shutdown"},{"id":"user@1002.service","load":"loaded","active":"active","running":"running","description":"User Manager for UID 1002"},{"id":"wpa_supplicant.service","load":"loaded","active":"active","running":"running","description":"WPA supplicant"}]
          2020-08-17 21:23:31.975 - debug: linux-control.0 (10867) [needrestart] Tinker (192.168.138.74:22): no datapoints selected -> removing existing datapoints
          2020-08-17 21:23:31.993 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): send command: 'sudo -S du -sk /opt/iobroker/iobroker-data | awk '{ print $1 /1024 }''
          2020-08-17 21:23:32.097 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): response stdout:
          Sorry, user pi is not allowed to execute '/usr/bin/du -sk /opt/iobroker/iobroker-data' as root on localhost.
          2020-08-17 21:23:32.098 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): Tinker.folders.iobroker.size: NaN MB
          2020-08-17 21:23:32.148 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): send command: 'sudo -S find /opt/iobroker/iobroker-data -name "*" | wc -l'
          2020-08-17 21:23:32.253 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): response stdout:
          Sorry, user pi is not allowed to execute '/usr/bin/find /opt/iobroker/iobroker-data -name *' as root on localhost.
          0
          2020-08-17 21:23:32.255 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): Tinker.folders.iobroker.files: NaN Dateien
          2020-08-17 21:23:32.259 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): send command: 'tmp=$(sudo -S find /opt/iobroker/iobroker-data -name "*" -type f -exec stat -c "%Y %n" -- {} \; | sort -nr | head -n1 | awk '{print $2}') && date +%s -r $tmp'
          2020-08-17 21:23:32.328 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): response stdout:
          Sorry, user pi is not allowed to execute '/usr/bin/find /opt/iobroker/iobroker-data -name * -type f -exec stat -c %Y %n -- {} ;' as root on localhost.
          date: option requires an argument -- 'r'
          Try 'date --help' for more information.
          2020-08-17 21:23:32.330 - debug: linux-control.0 (10867) [folderSizes] Tinker (192.168.138.74:22): Tinker.folders.iobroker.lastChange: NaN ->
          2020-08-17 21:23:32.378 - debug: linux-control.0 (10867) [userCommand] Tinker (192.168.138.74:22, id: root, description: ): send command: 'df / | grep / | awk '{ print $5}' | sed 's/%//g''
          2020-08-17 21:23:32.422 - debug: linux-control.0 (10867) [userCommand] Tinker (192.168.138.74:22, id: root, description: ): response stdout: 5
          2020-08-17 21:23:32.428 - debug: linux-control.0 (10867) [userCommand] Tinker (192.168.138.74:22, id: ip, description: ): send command: 'hostname -I | cut -d' ' -f1'
          2020-08-17 21:23:32.472 - debug: linux-control.0 (10867) [userCommand] Tinker (192.168.138.74:22, id: ip, description: ): response stdout: 192.168.138.74
          2020-08-17 21:23:32.484 - debug: linux-control.0 (10867) [userCommand] Tinker (192.168.138.74:22, id: cpu-temp, description: ): send command: 'cat /sys/devices/virtual/thermal/thermal_zone0/temp | awk '{print substr($1, length($0)-5,3)}''
          2020-08-17 21:23:32.526 - debug: linux-control.0 (10867) [userCommand] Tinker (192.168.138.74:22, id: cpu-temp, description: ): response stdout: 46
          2020-08-17 21:23:32.532 - info: linux-control.0 (10867) successful received data from Tinker (192.168.138.74:22)
          

          Bleibt beim Tinker wohl dabei

          Sorry, user pi is not allowed to execute '/usr/bin/find /opt/iobroker/iobroker-data -name * -type f -exec stat -c %Y %n -- {} ;' as root on localhost.
          
          
          ScroungerS Offline
          ScroungerS Offline
          Scrounger
          Developer
          schrieb am zuletzt editiert von Scrounger
          #65

          @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

          @Scrounger

          frage - denkst du es wäre möglich, wenn ein befehl (button) ausgeführt wird, das man dann die datenpunkte des betreffenden servers aktualisieren (poll) könnte ?

          momentan , wenn der server alle 5 minuten abgefragt wird, wird das ergebnis ( z.b service ist gestoppt) erst (wenn es dumm läuft) nach 5 minuten im dp gezeigt

          Bei den update / upgrade commands ist das schon so umgestezt, das nach Ausführen des Befehls die DPs aktualisiert werden. Für die Services Commands könnte ich das auch einbauen.
          Für eigene Commands geht das nicht.

          Schreib bitte nen Issue dafür bei github, danke!

          @Homoran sagte in Test Adapter Linux Control v0.x.x:

          Bleibt beim Tinker wohl dabei

          Sorry, user pi is not allowed to execute '/usr/bin/find /opt/iobroker/iobroker-data -name * -type f -exec stat -c %Y %n -- {} ;' as root on localhost.
          
          

          Laut log funktioniert es jetzt auch bei deinem RasPi4 & NUC_VM.
          Tinker ist nen Berechtigungsthema.

          <a href="https://github.com/Scrounger/ioBroker.linkeddevices">LinkedDevices Adapter</a>

          <a href="https://github.com/Scrounger/ioBroker.vis-materialdesign">Material Design Widgets</a>

          HomoranH liv-in-skyL 2 Antworten Letzte Antwort
          0
          • ScroungerS Scrounger

            @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

            @Scrounger

            frage - denkst du es wäre möglich, wenn ein befehl (button) ausgeführt wird, das man dann die datenpunkte des betreffenden servers aktualisieren (poll) könnte ?

            momentan , wenn der server alle 5 minuten abgefragt wird, wird das ergebnis ( z.b service ist gestoppt) erst (wenn es dumm läuft) nach 5 minuten im dp gezeigt

            Bei den update / upgrade commands ist das schon so umgestezt, das nach Ausführen des Befehls die DPs aktualisiert werden. Für die Services Commands könnte ich das auch einbauen.
            Für eigene Commands geht das nicht.

            Schreib bitte nen Issue dafür bei github, danke!

            @Homoran sagte in Test Adapter Linux Control v0.x.x:

            Bleibt beim Tinker wohl dabei

            Sorry, user pi is not allowed to execute '/usr/bin/find /opt/iobroker/iobroker-data -name * -type f -exec stat -c %Y %n -- {} ;' as root on localhost.
            
            

            Laut log funktioniert es jetzt auch bei deinem RasPi4 & NUC_VM.
            Tinker ist nen Berechtigungsthema.

            HomoranH Nicht stören
            HomoranH Nicht stören
            Homoran
            Global Moderator Administrators
            schrieb am zuletzt editiert von Homoran
            #66

            @Scrounger sagte in Test Adapter Linux Control v0.x.x:

            Tinker ist nen Berechtigungsthema.

            sehe ich auch so. Nur seltsam, dass es als eigener Befehl funktioniert.
            Ich hoffe ich komme heute mal endlich dazu mich an den PC zu setzen.
            Werde dann einen weiteren Tinker einbinden und mal den Befehl von @Thomas-Braun testen

            kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

            Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

            der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

            1 Antwort Letzte Antwort
            0
            • ScroungerS Scrounger

              @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

              @Scrounger

              frage - denkst du es wäre möglich, wenn ein befehl (button) ausgeführt wird, das man dann die datenpunkte des betreffenden servers aktualisieren (poll) könnte ?

              momentan , wenn der server alle 5 minuten abgefragt wird, wird das ergebnis ( z.b service ist gestoppt) erst (wenn es dumm läuft) nach 5 minuten im dp gezeigt

              Bei den update / upgrade commands ist das schon so umgestezt, das nach Ausführen des Befehls die DPs aktualisiert werden. Für die Services Commands könnte ich das auch einbauen.
              Für eigene Commands geht das nicht.

              Schreib bitte nen Issue dafür bei github, danke!

              @Homoran sagte in Test Adapter Linux Control v0.x.x:

              Bleibt beim Tinker wohl dabei

              Sorry, user pi is not allowed to execute '/usr/bin/find /opt/iobroker/iobroker-data -name * -type f -exec stat -c %Y %n -- {} ;' as root on localhost.
              
              

              Laut log funktioniert es jetzt auch bei deinem RasPi4 & NUC_VM.
              Tinker ist nen Berechtigungsthema.

              liv-in-skyL Offline
              liv-in-skyL Offline
              liv-in-sky
              schrieb am zuletzt editiert von
              #67

              @Scrounger sagte in Test Adapter Linux Control v0.x.x:

              Schreib bitte nen Issue dafür bei github, danke!

              done und vielen dank

              nach einem gelösten Thread wäre es sinnvoll dies in der Überschrift des ersten Posts einzutragen [gelöst]-... Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat. Forum-Tools: PicPick https://picpick.app/en/download/ und ScreenToGif https://www.screentogif.com/downloads.html

              1 Antwort Letzte Antwort
              0
              • Thomas BraunT Thomas Braun

                @Homoran

                ls -la /usr/bin/find
                

                Je nachdem kann man dann halt ein setuid bit setzen (siehe Wikipedia)

                Ausführbare Programme, bei denen dieses Bit gesetzt ist, werden zusätzlich zu den Rechten desjenigen Benutzers, der die Datei ausführt, auch mit den Rechten des Benutzers ausgeführt, dem die Datei gehört (das heißt mit den Rechten des Besitzers der Datei, des "Owners"). Auf den meisten Systemen funktioniert dies nur für ausführbare Binärdateien, nicht jedoch für interpretierte Scripts.

                Dieses Vorgehen ermöglicht unprivilegierten Benutzern und Prozessen einen kontrollierten Zugriff auf privilegierte Ressourcen.

                Das könnte bei deinem Problem der Fall sein, wenn die Meldung nicht in die Irre führt.

                HomoranH Nicht stören
                HomoranH Nicht stören
                Homoran
                Global Moderator Administrators
                schrieb am zuletzt editiert von Homoran
                #68

                @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                ls -la /usr/bin/find

                pi@tinkerboard:~$ ls -la /usr/bin/find
                -rwxr-xr-x 1 root root 158456 Nov  5  2017 /usr/bin/find
                

                habe das ganze dann mit sudo su mal als root ausführen wollen, um zu sehen, ob ich damals vielleicht unter root installiert hatte 😳 dabei kam das hier:

                pi@tinkerboard:~$ sudo su
                [sudo] password for pi:
                Sorry, user pi is not allowed to execute '/bin/su' as root on localhost.
                

                vielleicht hilft das

                kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                Thomas BraunT 1 Antwort Letzte Antwort
                0
                • HomoranH Homoran

                  @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                  ls -la /usr/bin/find

                  pi@tinkerboard:~$ ls -la /usr/bin/find
                  -rwxr-xr-x 1 root root 158456 Nov  5  2017 /usr/bin/find
                  

                  habe das ganze dann mit sudo su mal als root ausführen wollen, um zu sehen, ob ich damals vielleicht unter root installiert hatte 😳 dabei kam das hier:

                  pi@tinkerboard:~$ sudo su
                  [sudo] password for pi:
                  Sorry, user pi is not allowed to execute '/bin/su' as root on localhost.
                  

                  vielleicht hilft das

                  Thomas BraunT Online
                  Thomas BraunT Online
                  Thomas Braun
                  Most Active
                  schrieb am zuletzt editiert von
                  #69

                  @Homoran Setz das setuid bit mal auf die Datei:

                  sudo chmod u+x /usr/bin/find
                  

                  Die Rechte müssten danach so aussehen:

                  -rwSr-xr-x 1 root root 158456 Nov  5  2017 /usr/bin/find
                  

                  Linux-Werkzeugkasten:
                  https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                  NodeJS Fixer Skript:
                  https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                  iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                  HomoranH 1 Antwort Letzte Antwort
                  0
                  • Thomas BraunT Thomas Braun

                    @Homoran Setz das setuid bit mal auf die Datei:

                    sudo chmod u+x /usr/bin/find
                    

                    Die Rechte müssten danach so aussehen:

                    -rwSr-xr-x 1 root root 158456 Nov  5  2017 /usr/bin/find
                    
                    HomoranH Nicht stören
                    HomoranH Nicht stören
                    Homoran
                    Global Moderator Administrators
                    schrieb am zuletzt editiert von
                    #70

                    @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                    Setz das setuid bit mal auf die Datei:

                    W+ürde ich ja gerne, aber:

                    Sorry, user pi is not allowed to execute '/bin/chmod u+x /usr/bin/find' as root on localhost.
                    
                    

                    Darf ich da ausnahmsweise mal als root ran?

                    PS hatte ich schon mal irgendwo erwähnt, dass ich Ubuntu hasse?

                    kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                    Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                    der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                    liv-in-skyL Thomas BraunT 2 Antworten Letzte Antwort
                    0
                    • HomoranH Homoran

                      @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                      Setz das setuid bit mal auf die Datei:

                      W+ürde ich ja gerne, aber:

                      Sorry, user pi is not allowed to execute '/bin/chmod u+x /usr/bin/find' as root on localhost.
                      
                      

                      Darf ich da ausnahmsweise mal als root ran?

                      PS hatte ich schon mal irgendwo erwähnt, dass ich Ubuntu hasse?

                      liv-in-skyL Offline
                      liv-in-skyL Offline
                      liv-in-sky
                      schrieb am zuletzt editiert von
                      #71

                      @Homoran uuuhhhh - heikles thema 🙂

                      nach einem gelösten Thread wäre es sinnvoll dies in der Überschrift des ersten Posts einzutragen [gelöst]-... Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat. Forum-Tools: PicPick https://picpick.app/en/download/ und ScreenToGif https://www.screentogif.com/downloads.html

                      HomoranH 1 Antwort Letzte Antwort
                      0
                      • liv-in-skyL liv-in-sky

                        @Homoran uuuhhhh - heikles thema 🙂

                        HomoranH Nicht stören
                        HomoranH Nicht stören
                        Homoran
                        Global Moderator Administrators
                        schrieb am zuletzt editiert von Homoran
                        #72

                        @liv-in-sky ich weiß, deswegen frag ich ja gaaaanz vorsichtig an 😉

                        Aber:
                        linux_control_011.png

                        Die Farbe wird sich hoffentlich im nächsten Zyklus ändern, ich hatte die Datenpunkte für den Header vergessen

                        Der Charly-Tinker hat ein Armbian auf Debian-Basis!

                        kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                        Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                        der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                        liv-in-skyL 1 Antwort Letzte Antwort
                        0
                        • HomoranH Homoran

                          @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                          Setz das setuid bit mal auf die Datei:

                          W+ürde ich ja gerne, aber:

                          Sorry, user pi is not allowed to execute '/bin/chmod u+x /usr/bin/find' as root on localhost.
                          
                          

                          Darf ich da ausnahmsweise mal als root ran?

                          PS hatte ich schon mal irgendwo erwähnt, dass ich Ubuntu hasse?

                          Thomas BraunT Online
                          Thomas BraunT Online
                          Thomas Braun
                          Most Active
                          schrieb am zuletzt editiert von
                          #73

                          @Homoran sagte in Test Adapter Linux Control v0.x.x:

                          Darf ich da ausnahmsweise mal als root ran?

                          Versuch mal aus einer root-shell heraus.
                          Aber eigentlich wundert es mich, dass das nicht mit sudo geht.

                          Linux-Werkzeugkasten:
                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                          NodeJS Fixer Skript:
                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                          HomoranH 1 Antwort Letzte Antwort
                          0
                          • Thomas BraunT Thomas Braun

                            @Homoran sagte in Test Adapter Linux Control v0.x.x:

                            Darf ich da ausnahmsweise mal als root ran?

                            Versuch mal aus einer root-shell heraus.
                            Aber eigentlich wundert es mich, dass das nicht mit sudo geht.

                            HomoranH Nicht stören
                            HomoranH Nicht stören
                            Homoran
                            Global Moderator Administrators
                            schrieb am zuletzt editiert von
                            #74

                            @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                            Aber eigentlich wundert es mich, dass das nicht mit sudo geht.

                            da scheint dann auch der Wurm mit den Rechten dran zu hängen

                            über root gesetzt und über pi abgefragt:

                            -rwxr-xr-x 1 root root 158456 Nov  5  2017 /usr/bin/find
                            
                            

                            kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                            Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                            der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                            Thomas BraunT HomoranH 2 Antworten Letzte Antwort
                            0
                            • HomoranH Homoran

                              @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                              Aber eigentlich wundert es mich, dass das nicht mit sudo geht.

                              da scheint dann auch der Wurm mit den Rechten dran zu hängen

                              über root gesetzt und über pi abgefragt:

                              -rwxr-xr-x 1 root root 158456 Nov  5  2017 /usr/bin/find
                              
                              
                              Thomas BraunT Online
                              Thomas BraunT Online
                              Thomas Braun
                              Most Active
                              schrieb am zuletzt editiert von
                              #75

                              @Homoran
                              Kannst du mal die komplette Ein- und Ausgabe zeigen? Also inkl. prompt?

                              Linux-Werkzeugkasten:
                              https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                              NodeJS Fixer Skript:
                              https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                              iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                              HomoranH 1 Antwort Letzte Antwort
                              0
                              • Thomas BraunT Thomas Braun

                                @Homoran
                                Kannst du mal die komplette Ein- und Ausgabe zeigen? Also inkl. prompt?

                                HomoranH Nicht stören
                                HomoranH Nicht stören
                                Homoran
                                Global Moderator Administrators
                                schrieb am zuletzt editiert von Homoran
                                #76

                                @Thomas-Braun sagte in Test Adapter Linux Control v0.x.x:

                                @Homoran
                                Kannst du mal die komplette Ein- und Ausgabe zeigen? Also inkl. prompt?

                                klar:
                                root:

                                root@tinkerboard:~# chmod u+x /usr/bin/find
                                root@tinkerboard:~#
                                

                                pi

                                pi@tinkerboard:~$ ls -la /usr/bin/find
                                -rwxr-xr-x 1 root root 158456 Nov  5  2017 /usr/bin/find
                                

                                kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                                Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                                der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                                1 Antwort Letzte Antwort
                                0
                                • HomoranH Homoran

                                  @liv-in-sky ich weiß, deswegen frag ich ja gaaaanz vorsichtig an 😉

                                  Aber:
                                  linux_control_011.png

                                  Die Farbe wird sich hoffentlich im nächsten Zyklus ändern, ich hatte die Datenpunkte für den Header vergessen

                                  Der Charly-Tinker hat ein Armbian auf Debian-Basis!

                                  liv-in-skyL Offline
                                  liv-in-skyL Offline
                                  liv-in-sky
                                  schrieb am zuletzt editiert von
                                  #77

                                  @Homoran sagte in Test Adapter Linux Control v0.x.x:

                                  @liv-in-sky ich weiß, deswegen frag ich ja gaaaanz vorsichtig an 😉

                                  Aber:
                                  linux_control_011.png

                                  Die Farbe wird sich hoffentlich im nächsten Zyklus ändern, ich hatte die Datenpunkte für den Header vergessen

                                  Der Charly-Tinker hat ein Armbian auf Debian-Basis!

                                  falls da ein problem ist ( die farbe wird durch den is-online datenpunkt gemacht) machen wir im anderen thread weiter - du solltest auch das script auf den neusten stand bringen - da hat sich was geändert im adapter

                                  nach einem gelösten Thread wäre es sinnvoll dies in der Überschrift des ersten Posts einzutragen [gelöst]-... Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat. Forum-Tools: PicPick https://picpick.app/en/download/ und ScreenToGif https://www.screentogif.com/downloads.html

                                  HomoranH 2 Antworten Letzte Antwort
                                  0
                                  • liv-in-skyL liv-in-sky

                                    @Homoran sagte in Test Adapter Linux Control v0.x.x:

                                    @liv-in-sky ich weiß, deswegen frag ich ja gaaaanz vorsichtig an 😉

                                    Aber:
                                    linux_control_011.png

                                    Die Farbe wird sich hoffentlich im nächsten Zyklus ändern, ich hatte die Datenpunkte für den Header vergessen

                                    Der Charly-Tinker hat ein Armbian auf Debian-Basis!

                                    falls da ein problem ist ( die farbe wird durch den is-online datenpunkt gemacht) machen wir im anderen thread weiter - du solltest auch das script auf den neusten stand bringen - da hat sich was geändert im adapter

                                    HomoranH Nicht stören
                                    HomoranH Nicht stören
                                    Homoran
                                    Global Moderator Administrators
                                    schrieb am zuletzt editiert von
                                    #78

                                    @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

                                    machen wir im anderen thread weiter

                                    genau, der heisst da is-online statt isOnline

                                    @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

                                    du solltest auch das script auf den neusten stand bringen - da hat sich was geändert im adapter

                                    Stress!

                                    kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                                    Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                                    der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                                    liv-in-skyL 1 Antwort Letzte Antwort
                                    0
                                    • HomoranH Homoran

                                      @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

                                      machen wir im anderen thread weiter

                                      genau, der heisst da is-online statt isOnline

                                      @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

                                      du solltest auch das script auf den neusten stand bringen - da hat sich was geändert im adapter

                                      Stress!

                                      liv-in-skyL Offline
                                      liv-in-skyL Offline
                                      liv-in-sky
                                      schrieb am zuletzt editiert von liv-in-sky
                                      #79

                                      @Homoran mach wenn du zeit hast 🙂

                                      erstmal das linux thema lösen - die vis danach

                                      nach einem gelösten Thread wäre es sinnvoll dies in der Überschrift des ersten Posts einzutragen [gelöst]-... Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat. Forum-Tools: PicPick https://picpick.app/en/download/ und ScreenToGif https://www.screentogif.com/downloads.html

                                      1 Antwort Letzte Antwort
                                      0
                                      • liv-in-skyL liv-in-sky

                                        @Homoran sagte in Test Adapter Linux Control v0.x.x:

                                        @liv-in-sky ich weiß, deswegen frag ich ja gaaaanz vorsichtig an 😉

                                        Aber:
                                        linux_control_011.png

                                        Die Farbe wird sich hoffentlich im nächsten Zyklus ändern, ich hatte die Datenpunkte für den Header vergessen

                                        Der Charly-Tinker hat ein Armbian auf Debian-Basis!

                                        falls da ein problem ist ( die farbe wird durch den is-online datenpunkt gemacht) machen wir im anderen thread weiter - du solltest auch das script auf den neusten stand bringen - da hat sich was geändert im adapter

                                        HomoranH Nicht stören
                                        HomoranH Nicht stören
                                        Homoran
                                        Global Moderator Administrators
                                        schrieb am zuletzt editiert von
                                        #80

                                        @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

                                        da hat sich was geändert im adapter

                                        Dannbleiben wir hier bei dem Thema!
                                        müssen die alten states gelöscht werden?

                                        der neue state heisst is-online, die alten isOnline!

                                        @Thomas-Braun
                                        Die Änderung hat keinen Erfolg gebracht - habe aber im Moment die Instanz nicht auf debug, kenne also ad hoc die Fehlermeldung noch nicht.
                                        fürchte aber, dass da de user pi unter ubuntu einfach zu wenig Rechte bekommt.

                                        kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                                        Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                                        der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                                        liv-in-skyL 1 Antwort Letzte Antwort
                                        0
                                        • HomoranH Homoran

                                          @liv-in-sky sagte in Test Adapter Linux Control v0.x.x:

                                          da hat sich was geändert im adapter

                                          Dannbleiben wir hier bei dem Thema!
                                          müssen die alten states gelöscht werden?

                                          der neue state heisst is-online, die alten isOnline!

                                          @Thomas-Braun
                                          Die Änderung hat keinen Erfolg gebracht - habe aber im Moment die Instanz nicht auf debug, kenne also ad hoc die Fehlermeldung noch nicht.
                                          fürchte aber, dass da de user pi unter ubuntu einfach zu wenig Rechte bekommt.

                                          liv-in-skyL Offline
                                          liv-in-skyL Offline
                                          liv-in-sky
                                          schrieb am zuletzt editiert von liv-in-sky
                                          #81

                                          @Homoran sagte in Test Adapter Linux Control v0.x.x:

                                          Dannbleiben wir hier bei dem Thema!
                                          müssen die alten states gelöscht werden?
                                          der neue state heisst is-online, die alten isOnline!

                                          adpter stop - den linux-control.0 ordner löschen - adapter start

                                          und script stoppen

                                          nach einem gelösten Thread wäre es sinnvoll dies in der Überschrift des ersten Posts einzutragen [gelöst]-... Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat. Forum-Tools: PicPick https://picpick.app/en/download/ und ScreenToGif https://www.screentogif.com/downloads.html

                                          ChaotC 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          384

                                          Online

                                          32.4k

                                          Benutzer

                                          81.4k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe