UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[crunchip]

Eine Frage hätte ich noch.
Mir ist folgendes aufgefallen

Die Markierung ist der Zeitpunkt, des Update´s von Node.js 8 auf 10 , mittels (Variante D- Neuinstallation mit Restore) und Fixer Skript.
Kann mir jemand sagen, warum sich der Netzwerk-Traffic so verändert hat bzw. woher das kommt?
Die Grafik bezieht sich rein auf die IoBroker VM

[Stabilostick]

@crunchip sagte in [How-to] Node.js für ioBroker richtig updaten:

was müsste ich da noch machen?

Ich tippe mal auf einen Adapter, der die GPIOs eines RPIs abfragt und epoll nutzt als Auslöser. Installiere zum Test eine neuere Version des epoll-Moduls mit npm direkt im ioBroker-Verzeichnis. Also

npm i epoll

Und weil Du als root arbeitest, den Fixxer ggf. nicht vegessen.

[Stabilostick]

@crunchip sagte in [How-to] Node.js für ioBroker richtig updaten:

warum sich der Netzwerk-Traffic so verändert

Du kannst z.B. iftop, ein Analysewerkzeug für Netzwerktraffic, verwenden. Es ähnelt dem top-Befehl.

[crunchip]

@Stabilostick jep, hatte schon gegoogelt und gelesen, das es was mit den GPIO´s zu tun hat.
Das hatte ich gemacht,

root@IoBroker:/opt/iobroker# npm i epoll

> epoll@0.1.22 install /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o
In file included from ../../nan/nan.h:192:0,
                 from ../src/epoll.cc:15:
../../nan/nan_maybe_43_inl.h: In function ‘Nan::Maybe<bool> Nan::ForceSet(v8::Local<v8::Object>, v8::Loca                                 l<v8::Value>, v8::Local<v8::Value>, v8::PropertyAttribute)’:
../../nan/nan_maybe_43_inl.h:112:15: error: ‘class v8::Object’ has no member named ‘ForceSet’
   return obj->ForceSet(isolate->GetCurrentContext(), key, value, attribs);
               ^~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8:                                 :Function>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:835:60: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_co                                 ntext) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, func, argc, argv);
                                                            ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8:                                 :String>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:850:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, v8::Local<v8::String>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_cont                                 ext) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, symbol, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:170:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, const char*,                                  int, v8::Local<v8::Value>*)’:
../../nan/nan.h:865:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, const char*, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wde                                 precated-declarations]
         v8::Isolate::GetCurrent(), target, method, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:163:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::Callback::Call_(v8::Isolate*, v8::Local<v8                                 ::Object>, int, v8::Local<v8::Value>*) const’:
../../nan/nan.h:1479:5: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_co                                 ntext) [-Wdeprecated-declarations]
     ));
     ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Add(Nan::NAN_METHOD                                 _ARGS_TYPE)’:
../src/epoll.cc:210:44: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                            ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:210:67: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                                                   ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Modify(Nan::NAN_MET                                 HOD_ARGS_TYPE)’:
../src/epoll.cc:230:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:230:70: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                                                      ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Remove(Nan::NAN_MET                                 HOD_ARGS_TYPE)’:
../src/epoll.cc:247:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Remove(info[0]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
epoll.target.mk:103: die Regel für Ziel „Release/obj.target/epoll/src/epoll.o“ scheiterte
make: *** [Release/obj.target/epoll/src/epoll.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:2                                 62:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.9.0-9-amd64
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebui                                 ld"
gyp ERR! cwd /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
gyp ERR! node -v v10.16.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok

> epoll@2.0.9 install /opt/iobroker/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Verzeichnis „/opt/iobroker/node_modules/epoll/build“ wird verlassen
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 (node_modules/rpi-gpio/node_modules/epoll):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

+ epoll@2.0.9
updated 1 package and audited 48196 packages in 63.253s
found 141 vulnerabilities (73 low, 5 moderate, 63 high)
  run `npm audit fix` to fix them, or `npm audit` for details
root@IoBroker:/opt/iobroker#

auch ein
npm i unix-dgram

root@IoBroker:/opt/iobroker# npm i unix-dgram

> epoll@0.1.22 install /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o
In file included from ../../nan/nan.h:192:0,
                 from ../src/epoll.cc:15:
../../nan/nan_maybe_43_inl.h: In function ‘Nan::Maybe<bool> Nan::ForceSet(v8::Local<v8::Object>, v8::Loca                                 l<v8::Value>, v8::Local<v8::Value>, v8::PropertyAttribute)’:
../../nan/nan_maybe_43_inl.h:112:15: error: ‘class v8::Object’ has no member named ‘ForceSet’
   return obj->ForceSet(isolate->GetCurrentContext(), key, value, attribs);
               ^~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8:                                 :Function>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:835:60: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_co                                 ntext) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, func, argc, argv);
                                                            ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8:                                 :String>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:850:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, v8::Local<v8::String>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_cont                                 ext) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, symbol, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:170:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, const char*,                                  int, v8::Local<v8::Value>*)’:
../../nan/nan.h:865:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, const char*, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wde                                 precated-declarations]
         v8::Isolate::GetCurrent(), target, method, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:163:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::Callback::Call_(v8::Isolate*, v8::Local<v8                                 ::Object>, int, v8::Local<v8::Value>*) const’:
../../nan/nan.h:1479:5: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Obj                                 ect>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_co                                 ntext) [-Wdeprecated-declarations]
     ));
     ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Add(Nan::NAN_METHOD                                 _ARGS_TYPE)’:
../src/epoll.cc:210:44: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                            ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:210:67: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                                                   ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Modify(Nan::NAN_MET                                 HOD_ARGS_TYPE)’:
../src/epoll.cc:230:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:230:70: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                                                      ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Remove(Nan::NAN_MET                                 HOD_ARGS_TYPE)’:
../src/epoll.cc:247:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version                                  [-Wdeprecated-declarations]
   int err = epoll->Remove(info[0]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
epoll.target.mk:103: die Regel für Ziel „Release/obj.target/epoll/src/epoll.o“ scheiterte
make: *** [Release/obj.target/epoll/src/epoll.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:2                                 62:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.9.0-9-amd64
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebui                                 ld"
gyp ERR! cwd /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
gyp ERR! node -v v10.16.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok

> unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird betreten
  CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
  SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
  COPY Release/unix_dgram.node
make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird verlassen
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 (node_modules/rpi-gpio/node_modules/epoll):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

+ unix-dgram@2.0.3
updated 1 package and audited 48196 packages in 67.015s
found 141 vulnerabilities (73 low, 5 moderate, 63 high)
  run `npm audit fix` to fix them, or `npm audit` for details

[crunchip]

@Stabilostick habs mal installiert, seh ne Menge Geräte und jede Menge zahlen :grinning: jedoch kann ich damit auch nicht viel anfangen, hehe

[apollon77]

@crunchip dann installier mal bei von GitHub. Du hast bestimmt die alte Alexa2 Version jetzt erwischt.

[crunchip]

@apollon77 auf was bezogen? Alte Alexa2Version?
Ichhatte von Git installiert, da ja nach der Neukonfiguration des Rechners, die stable 1.1.3 installiert wird.

[apollon77]

@crunchip und danach auch Instanz neu gestartet? Am besten im log prüfen das auch die 2.2 gestartet wird.

[crunchip]

@apollon77 ah, jetzt komm ich mit, das war deine Antwort auf mein post mit den ssml beheben.
Erkennt man leider nicht, worauf du geantwortet hast und ich zwischenzeitlich noch mehrere Post´s /Fragen hatte.

Deshalb

@crunchip sagte in [How-to] Node.js für ioBroker richtig updaten:

auf was bezogen? Alte Alexa2Version?

[apollon77]

@crunchip schau mal im post neben dem Namen. Da sieht man ob es eine Antwort ist auf eine früher frage mit dem Link zurück ;-)

[crunchip]

@apollon77 man man man, der Weisse Balken:face_palm:

[Mic]

Hi,

danke für die Anleitung. Nach Upgrade von 8 auf 10 und Ausführung von "npm rebuild" bekomme ich folgende Errors:

npm ERR! path /opt/iobroker/node_modules/acme-dns-01-cli/package.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! syscall open
npm ERR! enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/acme-dns-01-cli/package.json'
npm ERR! enoent This is related to npm not being able to find a file.
npm ERR! enoent

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-06-10T18_25_43_977Z-debug.log

Welcher "Adapter" ist denn "acme-dns-01-cli" bzw. was kann ich hier tun?
Habe jetzt meinen Proxmox-Snapshot wieder zurück gesetzt.

Danke,
Mic

[Stabilostick]

@crunchip sagte in [How-to] Node.js für ioBroker richtig updaten:

Trotz der vielen Warnungen und des einen Fehlers: Die Logs sagen, dass sowohl die neue Version von epoll als auch unix-dgram erfolgreich installiert wurden. npm versucht, bei jedem Build auch die vorhergegangenen fehlgeschlagenen Builds wieder. Von daher die Meldungen. Wenn Du nachsiehst, wirst Du feststellen, dass sie sich z.B. auf epoll@0.xxx beziehen.

Währe mal eine Idee, das zu deinstallieren. Also npm r epoll@0.xxx mit Deiner alten Version.

[Stabilostick]

@Mic

Schaue im Snapshot nach, ob die Datei node_modules/acme-dns-01-cli/package.json tatsächlich fehlt oder vielleicht ein Rechteproblem vorliegt.

Fehlt die Datei, kannst das Modul ggf. mit npm i acme-dns-01-cli neu installieren.

[crunchip]

@Stabilostick

npm r epoll@0.1.22

ergab folgendes

> epoll@0.1.22 install /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o
In file included from ../../nan/nan.h:192:0,
                 from ../src/epoll.cc:15:
../../nan/nan_maybe_43_inl.h: In function ‘Nan::Maybe<bool> Nan::ForceSet(v8::Local<v8::Object>, v8::Local<v8::Value>, v8::Local<v8::Value>, v8::PropertyAttribute)’:
../../nan/nan_maybe_43_inl.h:112:15: error: ‘class v8::Object’ has no member named ‘ForceSet’
   return obj->ForceSet(isolate->GetCurrentContext(), key, value, attribs);
               ^~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:835:60: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, func, argc, argv);
                                                            ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::String>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:850:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::String>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, symbol, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:170:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, const char*, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:865:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, const char*, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, method, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:163:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::Callback::Call_(v8::Isolate*, v8::Local<v8::Object>, int, v8::Local<v8::Value>*) const’:
../../nan/nan.h:1479:5: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
     ));
     ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Add(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/epoll.cc:210:44: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                            ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:210:67: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                                                   ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Modify(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/epoll.cc:230:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:230:70: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                                                      ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Remove(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/epoll.cc:247:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Remove(info[0]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
epoll.target.mk:103: die Regel für Ziel „Release/obj.target/epoll/src/epoll.o“ scheiterte
make: *** [Release/obj.target/epoll/src/epoll.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.9.0-9-amd64
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
gyp ERR! node -v v10.16.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 (node_modules/rpi-gpio/node_modules/epoll):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

audited 51142 packages in 60.877s
found 141 vulnerabilities (73 low, 5 moderate, 63 high)
  run `npm audit fix` to fix them, or `npm audit` for details

[Stabilostick]

@crunchip

Mea culpa, mein Fehler. Das „r“ war falsch. Sollte ein „u“ für uninstall sein.

[crunchip]

@Stabilostick wenn man blind vertraut :grin:
bist du sicher mit dem "u":joy:
das klappt nicht

root@IoBroker:/opt/iobroker# npm u epoll@0.1.22

Usage: npm <command>

where <command> is one of:
    access, adduser, audit, bin, bugs, c, cache, ci, cit,
    clean-install, clean-install-test, completion, config,
    create, ddp, dedupe, deprecate, dist-tag, docs, doctor,
    edit, explore, get, help, help-search, hook, i, init,
    install, install-ci-test, install-test, it, link, list, ln,
    login, logout, ls, org, outdated, owner, pack, ping, prefix,
    profile, prune, publish, rb, rebuild, repo, restart, root,
    run, run-script, s, se, search, set, shrinkwrap, star,
    stars, start, stop, t, team, test, token, tst, un,
    uninstall, unpublish, unstar, up, update, v, version, view,
    whoami

npm <command> -h  quick help on <command>
npm -l            display full usage info
npm help <term>   search for help on <term>
npm help npm      involved overview

Specify configs in the ini-formatted file:
    /root/.npmrc
or on the command line via: npm <command> --key value
Config info can be viewed via: npm help config

npm@6.9.0 /usr/lib/node_modules/npm

man darf halt nicht immer so faul sein und manche Wörter einfach ausschreiben

die Ausgabe

root@IoBroker:/opt/iobroker# npm uninstall epoll@0.1.22

> epoll@0.1.22 install /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o
In file included from ../../nan/nan.h:192:0,
                 from ../src/epoll.cc:15:
../../nan/nan_maybe_43_inl.h: In function ‘Nan::Maybe<bool> Nan::ForceSet(v8::Local<v8::Object>, v8::Local<v8::Value>, v8::Local<v8::Value>, v8::PropertyAttribute)’:
../../nan/nan_maybe_43_inl.h:112:15: error: ‘class v8::Object’ has no member named ‘ForceSet’
   return obj->ForceSet(isolate->GetCurrentContext(), key, value, attribs);
               ^~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:835:60: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, func, argc, argv);
                                                            ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::String>, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:850:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::String>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, symbol, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:170:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, const char*, int, v8::Local<v8::Value>*)’:
../../nan/nan.h:865:62: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, const char*, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
         v8::Isolate::GetCurrent(), target, method, argc, argv);
                                                              ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:163:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
In file included from ../src/epoll.cc:15:0:
../../nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::Callback::Call_(v8::Isolate*, v8::Local<v8::Object>, int, v8::Local<v8::Value>*) const’:
../../nan/nan.h:1479:5: warning: ‘v8::Local<v8::Value> node::MakeCallback(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declarations]
     ));
     ^
In file included from ../src/epoll.cc:12:0:
/root/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here
                 NODE_EXTERN v8::Local<v8::Value> MakeCallback(
                                                  ^
/root/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of macro ‘NODE_DEPRECATED’
     __attribute__((deprecated(message))) declarator
                                          ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Add(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/epoll.cc:210:44: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                            ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:210:67: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Add(info[0]->Int32Value(), info[1]->Int32Value());
                                                                   ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Modify(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/epoll.cc:230:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc:230:70: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Modify(info[0]->Int32Value(), info[1]->Int32Value());
                                                                      ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/epoll.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Epoll::Remove(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/epoll.cc:247:47: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   int err = epoll->Remove(info[0]->Int32Value());
                                               ^
In file included from /root/.node-gyp/10.16.0/include/node/v8.h:26:0,
                 from ../src/epoll.cc:11:
/root/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
epoll.target.mk:103: die Regel für Ziel „Release/obj.target/epoll/src/epoll.o“ scheiterte
make: *** [Release/obj.target/epoll/src/epoll.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/rpi-gpio/node_modules/epoll/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.9.0-9-amd64
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/rpi-gpio/node_modules/epoll
gyp ERR! node -v v10.16.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 (node_modules/rpi-gpio/node_modules/epoll):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: epoll@0.1.22 install: `node-gyp rebuild`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

audited 51142 packages in 67.966s
found 141 vulnerabilities (73 low, 5 moderate, 63 high)
  run `npm audit fix` to fix them, or `npm audit` for details

[Mic]

@Stabilostick sagte in [How-to] Node.js für ioBroker richtig updaten:

npm i acme-dns-01-cli

Danke.
Das Verzeichnis "/opt/iobroker/node_modules/acme-dns-01-cli/" existiert gar nicht. Nach Updaten durch "npm i acme-dns-01-cli" folgende Ausgabe:

npm WARN saveError ENOENT: no such file or directory, open '/root/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/root/package.json'
npm WARN root No description
npm WARN root No repository field.
npm WARN root No README data
npm WARN root No license field.

+ acme-dns-01-cli@3.0.7
updated 1 package and audited 643 packages in 2.32s
found 0 vulnerabilities

Auch danach wird das Verzeichnis "/opt/iobroker/node_modules/acme-dns-01-cli/" nicht erstellt.

Stattdessen liegt das Verzeichnis hier: "/root/node_modules/acme-dns-01-cli", Inhalt:

index.js
LICENSE
package.json
README.md

[Stabilostick]

@crunchip

so, wieder am Rechner... Jetzt kann ich nachsehen. Also das aktuelle rpi-gpio Modul hat die folgenden Abhängigkeiten:

"dependencies": {
   "async-retry": "^1.2.1",
   "debug": "^3.1.0",
   "epoll": "^2.0.3"
}

Da ist ein Node 10-kompatibles epoll referenziert. Und so sieht es mit der Node 10-Kompatibilität von rpi-gpio allgemein aus (https://github.com/JamesBarwell/rpi-gpio.js) :

rpi-gpio 1.x is no longer supported. Please use 2.x unless you need to run with an old version of node.
node version 	rpi-gpio 1.x 	rpi-gpio 2.x +
0.10 	 	Yes 	 	No
0.12 	 	Yes 	 	No
4 	 	Yes 	 	Yes
6 	 	Yes 	 	Yes
8 	 	Yes 	 	Yes
10 	 	No 	 	Yes

Falls der Auslöser für die Verwendung von rpi-gpio der rpi2-Adapter ist - der hat u.a. diese Abhängigkeit:

"optionalDependencies": {
    "rpi-gpio": "^1.0.0"
},

Das heißt, das Modul rpi-gpio kann auch in höheren Verionen als 1.0.0 für rpi2 eingesetzt werden.

Mit

npm ls rpi-gpio

siehst Du, wo das Modul in welcher Version steckt. Was wird da angezeigt?

PS: Der chicken-Way ist, sich die Einstellungen des rpi2-Adapter zu notieren, alles Instanzen und den Adapter zu löschen, und ihn anschließend neu zu installieren und zu konfigurieren. Da kommen dann die neuen Versionen der Module mit. :yum:

[Stabilostick]

@Mic sagte in [How-to] Node.js für ioBroker richtig updaten:

Ah, Du bist einer welcher, der die Sicherheit seines Systems täglich aufs neue herausfordert, indem Du als root-User arbeitest. :smiling_imp:

npm i acme-dns-01-cli

Hattest Du das im ioBroker-Ordner (z.B. /opt/iobroker) ausgeführt?

Wegen root-User: Versuche es ggf. einmal mit dem ioBroker-Fixer, der einige Berechtigungen und Einstellungen korrigiert:

curl -sL https://iobroker.net/fix.sh | bash -