[Aufruf] BLE Adapter testen (v0.6.0)

Siegfried

Habe auf die v0.6.0 geupdatet trotzdem scheint bei mir scheint die Möglichkeit nicht auf

AlCalzone

Wie hast du geupdated?

Siegfried

erst über git …dann habe ich versucht zu deinstallieren und neu zu installieren ...

aber immer hat sich nichts geändert

Siegfried

nochmal aus git probiert …

Nun hab ich den fehler: unhandled promise rejection: Error: Cannot find module '@abandonware/bluetooth-hci-socket'

AlCalzone

~~@Siegfried:~~

erst über git `
Da ist das Problem. Bei Installation von git wird kein Upload ausgeführt.

Sofern nicht explizit dazu aufgefordert, bitte immer normal über die Adapter-Liste installieren.

~~@Siegfried:~~

Cannot find module '@abandonware/bluetooth-hci-socket' `
Was steht im Installer-Log? Da muss irgendein Fehler aufgetreten sein.

Siegfried

da steht:

! ````
$ ./iobroker url "https://github.com/AlCalzone/ioBroker.ble"
install https://github.com/AlCalzone/ioBroker.ble/tarball/master
npm install https://github.com/AlCalzone/ioBroker.ble/tarball/master --production --save --prefix "/opt/iobroker" (System call)
npm

ERR!

path
/root/.npm/_logs
npm

ERR!

code
EACCES
npm
ERR! errno -13npm
ERR! syscall scandirnpm

ERR!
Error: EACCES: permission denied, scandir '/root/.npm/_logs'
npm
ERR! { Error: EACCES: permission denied, scandir '/root/.npm/_logs'npm
ERR! stack: 'Error: EACCES: permission denied, scandir '/root/.npm/_logs'',npm ERR! errno: -13,

! npm ERR! code: 'EACCES',npm
ERR! syscall: 'scandir',npm ERR!
path: '/root/.npm/_logs' }npm ERR!
npm ERR! The operation was rejected by your operating system.
! npm ERR! It is likely you do not have the permissions to access this file as the current usernpm
ERR! npm ERR! If you believe this might be a permissions issue, please double-check the
! npm ERR! permissions of the file and its containing directories, or try runningnpm ERR! the command again as root/Administrator (though this is not recommended).
! glob error { Error: EACCES: permission denied, scandir '/root/.npm/_logs' stack: 'Error: EACCES: permission denied, scandir '/root/.npm/_logs'',
errno: -13,
code: 'EACCES',
syscall: 'scandir',
path: '/root/.npm/_logs' }
! npm

ERR!

path
/root/.npm/_cacache/index-v5/f6/d3/856f4e146dc3e8cb995652c4d6a1e16806d6bca7e87878fd9046e55ea74f
npm

ERR!

code
EACCESnpm
ERR! errno
-13npm ERR! syscall
opennpm

ERR! Error: EACCES: permission denied, open '/root/.npm/_cacache/index-v5/f6/d3/856f4e146dc3e8cb995652c4d6a1e16806d6bca7e87878fd9046e55ea74f'npm ERR! { Error: EACCES: permission denied, open '/root/.npm/_cacache/index-v5/f6/d3/856f4e146dc3e8cb995652c4d6a1e16806d6bca7e87878fd9046e55ea74f'

! npm ERR! cause: npm
ERR! { Error: EACCES: permission denied, open '/root/.npm/_cacache/index-v5/f6/d3/856f4e146dc3e8cb995652c4d6a1e16806d6bca7e87878fd9046e55ea74f'npm ERR! errno: -13,
npm ERR! code: 'EACCES',
npm ERR! syscall: 'open',
npm ERR! path: '/root/.npm/_cacache/index-v5/f6/d3/856f4e146dc3e8cb995652c4d6a1e16806d6bca7e87878fd9046e55ea74f' },
npm ERR! isOperational: true,
npm ERR! stack: 'Error: EACCES: permission denied, open '/root/.npm/_cacache/index-v5/f6/d3/856f4e146dc3e8cb995652c4d6a1e16806d6bca7e87878fd9046e55ea74f'',
npm ERR! errno: -13,
npm ERR! code: 'EACCES',
npm ERR! syscall: 'open',
npm ERR! path: '/root/.npm/_cacache/index-v5/f6/d3/856f4e146dc3e8cb995652c4d6a1e16806d6bca7e87878fd9046e55ea74f' }
npm ERR!
npm ERR! The operation was rejected by your operating system.
! npm ERR! It is likely you do not have the permissions to access this file as the current usernpm ERR!
npm ERR! If you believe this might be a permissions issue, please double-check the
npm ERR!
permissions of the file and its containing directories, or try runningnpm ERR! the command again as root/Administrator (though this is not recommended).
! npm

WARN
react-beautiful-dnd@9.0.2 requires a peer of react@^16.3.1 but none is installed. You must install peer dependencies yourself.
npm

WARN
react-motion@0.5.2 requires a peer of react@^0.14.9 || ^15.3.0 || ^16.0.0 but none is installed. You must install peer dependencies yourself.
npm

WARN
react-redux@5.0.7 requires a peer of react@^0.14.0 || ^15.0.0-0 || ^16.0.0-0 but none is installed. You must install peer dependencies yourself.
npm
WARN react-beautiful-dnd@9.0.2 requires a peer of react@^16.3.1 but none is installed. You must install peer dependencies yourself.
npm WARN react-motion@0.5.2 requires a peer of react@^0.14.9 || ^15.3.0 || ^16.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN react-redux@5.0.7 requires a peer of react@^0.14.0 || ^15.0.0-0 || ^16.0.0-0 but none is installed. You must install peer dependencies yourself.npm
WARN optional SKIPPING OPTIONAL DEPENDENCY: xpc-connection@0.1.4 (node_modules/xpc-connection):npm
WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for xpc-connection@0.1.4: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})npm

WARN optional SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 (node_modules/@abandonware/bluetooth-hci-socket):npm
WARN optional
SKIPPING OPTIONAL DEPENDENCY: @abandonware/bluetooth-hci-socket@0.5.3-1 preinstall: npm install node-pre-gyp
npm
WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 243

! process exited with code 0


****EDIT: Code in Code und Spoiler-Tags ; Homoran(Admin)****

AlCalzone

Dachte ich es mir doch. Du hast mal mit sudo installiert.

=> Lesen und befolgen: viewtopic.php?f=8&t=19209

=> Nochmal den Adapter über die Admin-UI installieren.

Siegfried

hm bekomme es irgendwie nicht hin.

entweder ich bekomme den fehler oder es läuft wieder die alte version.

Habe auch den Befehl.````
sudo chown -R $(whoami) ~/.npm


Reicht das? Oder sollte ich das in Klammern mit was ersetzten.

Siegfried

jetzt läuft es …hab nun mit einem anderen Adapter probleme :-(

AlCalzone

Dann machst du am besten einen neuen Thread dazu auf ;)

Shaky79

Hallo zusammen,

bei mir findet er zwar das @abandonware/bluetooth-hci socket, aber er sagt mir schon wieder falsche node Version. (Siehe Anhang)

Ich dachte es gäbe jetzt Node10 Support? Sorry bin immer noch Anfänger mit Linux. Was mache ich hier falsch?

Ich hab nochmal neu installiert.

Bei der Installation kommt tatsächlich auch eine Fehlermeldung bei Bluetooth. Werde da aber nicht draus schlau. Bzw. weiß nicht was ich tun soll.

$ ./iobroker add ble  --host phoscon
NPM version: 6.5.0
npm install iobroker.ble --production --save --prefix "/opt/iobroker" (System call)
../src/BluetoothHciSocket.cpp: In member function ‘void BluetoothHciSocket::poll()’:../src/BluetoothHciSocket.cpp:251:95: warning: ‘v8::Local <v8::value>Nan::MakeCallback(v8::Local<v8::object>, v8::Local<v8::string>, int, v8::Local<v8::value>*)’ is deprecated [-Wdeprecated-declarations]
     Nan::MakeCallback(Nan::New<object>(this->This), Nan::New("emit").ToLocalChecked(), 2, argv);
                                                                                               ^
In file included from ../src/BluetoothHciSocket.cpp:8:0:
../../../../nan/nan.h:979:46: note: declared here
   NAN_DEPRECATED inline v8::Local <v8::value>MakeCallback(
                                              ^~~~~~~~~~~~
../src/BluetoothHciSocket.cpp: In member function ‘void BluetoothHciSocket::emitErrnoError()’:
../src/BluetoothHciSocket.cpp:275:72: error: no matching function for call to ‘v8::Function::NewInstance(int, v8::Local <v8::value>[1])’
   Local <value>error = errorConstructor->NewInstance(1, constructorArgs);
                                                                        ^
In file included from /root/.node-gyp/10.14.2/include/node/node.h:63:0,
                 from /root/.node-gyp/10.14.2/include/node/node_buffer.h:25,
                 from ../src/BluetoothHciSocket.cpp:7:
/root/.node-gyp/10.14.2/include/node/v8.h:3993:44: note: candidate: v8::MaybeLocal <v8::object>v8::Function::NewInstance(v8::Local<v8::context>, int, v8::Local<v8::value>*) const
   V8_WARN_UNUSED_RESULT MaybeLocal <object>NewInstance(
                                            ^~~~~~~~~~~
/root/.node-gyp/10.14.2/include/node/v8.h:3993:44: note:   candidate expects 3 arguments, 2 provided
/root/.node-gyp/10.14.2/include/node/v8.h:3996:44: note: candidate: v8::MaybeLocal <v8::object>v8::Function::NewInstance(v8::Local<v8::context>) const
   V8_WARN_UNUSED_RESULT MaybeLocal <object>NewInstance(
                                            ^~~~~~~~~~~
/root/.node-gyp/10.14.2/include/node/v8.h:3996:44: note:   candidate expects 1 argument, 2 provided
../src/BluetoothHciSocket.cpp:282:93: warning: ‘v8::Local <v8::value>Nan::MakeCallback(v8::Local<v8::object>, v8::Local<v8::string>, int, v8::Local<v8::value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::New<object>(this->This), Nan::New("emit").ToLocalChecked(), 2, argv);
                                                                                             ^
In file included from ../src/BluetoothHciSocket.cpp:8:0:
../../../../nan/nan.h:979:46: note: declared here
   NAN_DEPRECATED inline v8::Local <v8::value>MakeCallback(
                                              ^~~~~~~~~~~~
../src/BluetoothHciSocket.cpp: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE BluetoothHciSocket::BindRaw(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/BluetoothHciSocket.cpp:395:34: warning: ‘int64_t v8::Value::IntegerValue() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
       devId = arg0->IntegerValue();
                                  ^
In file included from /root/.node-gyp/10.14.2/include/node/v8.h:26:0,
                 from /root/.node-gyp/10.14.2/include/node/node.h:63,
                 from /root/.node-gyp/10.14.2/include/node/node_buffer.h:25,
                 from ../src/BluetoothHciSocket.cpp:7:
/root/.node-gyp/10.14.2/include/node/v8.h:2476:46: note: declared here
   V8_DEPRECATED("Use maybe version", int64_t IntegerValue() const);
                                              ^
/root/.node-gyp/10.14.2/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/BluetoothHciSocket.cpp: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE BluetoothHciSocket::BindUser(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/BluetoothHciSocket.cpp:417:34: warning: ‘int64_t v8::Value::IntegerValue() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
       devId = arg0->IntegerValue();
                                  ^
In file included from /root/.node-gyp/10.14.2/include/node/v8.h:26:0,
                 from /root/.node-gyp/10.14.2/include/node/node.h:63,
                 from /root/.node-gyp/10.14.2/include/node/node_buffer.h:25,
                 from ../src/BluetoothHciSocket.cpp:7:
/root/.node-gyp/10.14.2/include/node/v8.h:2476:46: note: declared here
   V8_DEPRECATED("Use maybe version", int64_t IntegerValue() const);
                                              ^
/root/.node-gyp/10.14.2/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~

make: *** [Release/obj.target/binding/src/BluetoothHciSocket.o] Error 1
gyp
 ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack     at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:182:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:240:12)

gyp ERR! System Linux 4.14.79-v7+gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/noble/node_modules/bluetooth-hci-socket
gyp ERR! node -v v10.14.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 

npm
 WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/node_modules/bluetooth-hci-socket/package.json'
npm 
WARN babel-eslint@5.0.4 requires a peer of eslint@<2.3.0 but none is installed. You must install peer dependencies yourself.
npm
 WARN
 optional
 SKIPPING OPTIONAL DEPENDENCY: bluetooth-hci-socket@0.5.1 (node_modules/noble/node_modules/bluetooth-hci-socket):
npm WARN
 optional SKIPPING OPTIONAL DEPENDENCY: bluetooth-hci-socket@0.5.1 install: `node-gyp rebuild`npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

host.phoscon install adapter ble
got /opt/iobroker/node_modules/iobroker.ble/admin
upload [2] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/words.js words.js application/javascript
upload [1] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/index.html index.html text/html
upload [0] ble.admin /opt/iobroker/node_modules/iobroker.ble/admin/ble.png ble.png image/png
host.phoscon object system.adapter.ble created
host.phoscon create instance ble
host.phoscon object ble.0.options.allowNewDevices created
host.phoscon object ble.0.options created
host.phoscon object ble.0.info.driverState created
host.phoscon object ble.0.info.connection created
host.phoscon object ble.0.info created
host.phoscon object system.adapter.ble.0.outputCount created
host.phoscon object system.adapter.ble.0.inputCount created
host.phoscon object system.adapter.ble.0.uptime created
host.phoscon object system.adapter.ble.0.memRss created
host.phoscon object system.adapter.ble.0.memHeapTotal created
host.phoscon object system.adapter.ble.0.memHeapUsed created
host.phoscon object system.adapter.ble.0.connected created
host.phoscon object system.adapter.ble.0.alive created
host.phoscon object system.adapter.ble.0 created
process exited with code 0

Fehlermeldung mit falscher Node Version bleibt aber die gleich. 

Lampe im Broker dann auf gelb

Gruss
  [10504_bleadapter.jpg](/assets/uploads/files/10504_bleadapter.jpg)</v8::value></object></v8::value></v8::string></v8::object></v8::value></object></v8::context></v8::object></object></v8::value></v8::context></v8::object></value></v8::value></v8::value></object></v8::value></v8::string></v8::object></v8::value>

AlCalzone

Nach einem NodeJS-Update kommst du um eine Neukompilierung der nativen Module nicht herum.

Das kannst du erledigen mit

cd /opt/iobroker
npm rebuild

Das wird eine Weile dauern.

Außerdem ist scheinbar noch eine alte Version des Adapters installiert. Bitte mal komplett löschen und neu installieren:

iobroker del ble
iobroker add ble

Shaky79

Danke schonmal . Rebuild wirft mir direkt ein paar EAccess Fehlermeldungen raus. Mach ich das auch mit diesem unsafe perm oder kann ich da sudo verwenden

Gesendet von iPhone mit Tapatalk

AlCalzone

~~@Shaky79:~~

Mach ich das auch mit diesem unsafe perm oder kann ich da sudo verwenden `
Nein und nein!

==> Bitte viewtopic.php?f=8&t=19209 lesen

Wenn in den Meldungen auch

scandir '/root/.npm/_logs'

auftaucht, dann hilft Punkt 4 aus dem Link.

Sonst nochmal die Meldungen posten.

Shaky79

** Update: Hat sich glaub ich erledigt. Fehlercode gibt es zwar immer noch, aber der Rebuild läuft atm durch*

pi@phoscon:~ $ cd /opt/iobroker
pi@phoscon:/opt/iobroker $ npm rebuild

> iobroker@1.3.1 install /opt/iobroker/node_modules/iobroker
> node lib/checkVersions.js

NPM version: 6.5.0

> iobroker@1.3.1 postinstall /opt/iobroker/node_modules/iobroker
> node lib/install.js

fs.js:115
    throw err;
    ^

Error: EACCES: permission denied, unlink '/opt/iobroker/LICENSE'
    at Object.unlinkSync (fs.js:952:3)
    at mayCopyFile (/opt/iobroker/node_modules/fs-extra/lib/copy-sync/copy-sync.js:57:8)
    at onFile (/opt/iobroker/node_modules/fs-extra/lib/copy-sync/copy-sync.js:52:10)
    at getStats (/opt/iobroker/node_modules/fs-extra/lib/copy-sync/copy-sync.js:46:44)
    at startCopy (/opt/iobroker/node_modules/fs-extra/lib/copy-sync/copy-sync.js:36:10)
    at Object.copySync (/opt/iobroker/node_modules/fs-extra/lib/copy-sync/copy-sync.js:31:10)
    at Object.copyFilesRecursiveSync (/opt/iobroker/node_modules/iobroker/lib/tools.js:591:12)
    at copyFilesToRootDir (/opt/iobroker/node_modules/iobroker/lib/installCopyFiles.js:29:11)
    at Object. <anonymous>(/opt/iobroker/node_modules/iobroker/lib/installCopyFiles.js:14:1)
    at Module._compile (internal/modules/cjs/loader.js:689:30)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! iobroker@1.3.1 postinstall: `node lib/install.js`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the iobroker@1.3.1 postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2018-12-29T09_02_20_981Z-debug.log
pi@phoscon:/opt/iobroker $</anonymous>

Das sind die Fehlermeldungen . Kein scandir dabei

Danke schonmal für deine Hilfe

Gesendet von iPhone mit Tapatalk

AlCalzone

Öhhhh das versucht das iobrokerpaket neu zu installieren und bricht dann ab… Geht folgendes?

cd /opt/iobroker
./reinstall.sh

Gesendet von unterwegs

Shaky79

Also irgendwie wird es immer kurioser:

npm rebuild ist jetzt durchgelaufen

bis es zu folgendem Fehler kommt:

bufferutil.target.mk:101: recipe for target 'Release/obj.target/bufferutil/src/bufferutil.o' failed
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/bufferutil/build'
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:182:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:240:12)
gyp ERR! System Linux 4.14.79-v7+
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/bufferutil
gyp ERR! node -v v10.14.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! bufferutil@1.1.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the bufferutil@1.1.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2018-12-29T11_02_07_683Z-debug.log

Hab danach trotzdem mal iobroker gestartet und siehe da: im Log gibt es keine Fehlermeldungen vom BLE Adapter mehr. Trotzdem bleibt er aber auf "gelb"

Muss noch was testen, dann melde ich mich nochmal
10504_ble2.jpg

AlCalzone

Was sagt der state Info.driverState?

Gesendet von unterwegs

Shaky79

so langsam werde ich weich:

unhandled promise rejection: Error: The module '/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/binding.node' was compiled against a different Node.js version using NODE_MODUL

Die Fehlermeldung kommt jetzt doch wieder beim Broker.

Das heißt wahrscheinlich, dass mein rebuild nicht bis zu dem node_module gekommen ist.

Irgendeine Idee wie ich das Problem mit der Fehlermeldung beim "bufferutil" wegbekomme?

Oder kann ich irgendwie nur das eine module rebuilden?

Gruss

AlCalzone

cd /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket 
npm rebuild

Gesendet von unterwegs

Community Forum

NEWS

[Aufruf] BLE Adapter testen (v0.6.0)

Support us

708

32.4k

81.5k

1.3m