Installation ioBroker bricht mit npm error code 22 ab

Homoran

@krcm sagte:

Der Schitt 3 / 4 dauert dann lange ohne das eine Ausgabe kommt aktuell ca 3 Minuten

Vollkommen normal!
Besonders beim pi3

krcm

ja eientlich wollte ich den Pi3 nicht mit 64 bit betreiben :-) aber bei der alten IOB Installation wollte ein Modul die 64 bit ich weiß aber nicht mehr welches (Schritt 4/4 läuft nocht

Homoran

@krcm sagte:

eientlich wollte ich den Pi3 nicht mit 64 bit betreiben :-)

Warum nicht?

@krcm sagte:

wollte ein Modul die 64 bit ich weiß aber nicht mehr welches

Iobroker

Du musst 64bit Systeme verwenden

krcm

OK Ich kanns halt nicht mehr sagen aber vorher hatte ich mit der Installation (gleiche HW) keine schwierigkeiten. Beim Update gab es dann eine Fehlermeldung und dann habe ich mich entschlossen das System zu updaten und neu zu Installieren
Die alte Installation lief ca 2 Jahre problemlos
Speicherkarte habe ich beim OS update verifizieren lassen keine Auffälligkeiten
PS der Installationschirtt 4/4 läuft noch

Ro75

@krcm besorge dir neue Hardware. Selbst wenn du den ioBroker zum Laufen bekommst, wirst du später mit den Adaptern, Performance Probleme bekommen. 1GB RAM ist zu wenig. Für jetzt und zukünftig solltest du schon was zwischen 4 und 8 GB RAM haben - eher 8.

Ro75.

Thomas Braun

@krcm sagte:

Der Schitt 3 / 4 dauert dann lange ohne das eine Ausgabe kommt aktuell ca 3 Minuten

Da kannst du dich schon mal im weiteren auch drauf einstellen. Das Ding ist für einen richtigen Betrieb halt zu schwach.

krcm

Ok danke für den Hinweis dann probier ich das ganze mal bei Gelegenheit auf meinem PI4 mit 8GB

Thomas Braun

@krcm sagte:

ja eientlich wollte ich den Pi3 nicht mit 64 bit betreiben

Das wirst du aber müssen, denn für 32Bit gibt es keinen aktuellen ioBroker (bzw. kein aktuelles nodejs mehr).

Homoran

@krcm sagte:

Ok danke für den Hinweis dann probier ich das ganze mal bei Gelegenheit auf meinem PI4 mit 8GB

Sehr weise Entscheidung!

Ich habe schon 2018 SBC mit 2 und 4 GB getestet um mehr Reserven zu haben.

Auch wenn iobroker da sogar noch auf ei em Pi mit 512MB lief.

Heute wird das nichts mehr

krcm

Hallo zusammen: Es sieht eigentlich jetzt nicht schlecht aus:


==========================================================================
    Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Autostart enabled!
Fixing directory permissions...
ACL enabled: true

==========================================================================

    ioBroker was installed successfully
    Open http://192.168.178.38:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!


==========================================================================

    Please run 'iob fix' first after the required re-login to finalize the setup.

==========================================================================

iobpi3@iobroker-pi3:/ $ exit
logout
Connection to iobroker-pi3 closed.
PS C:\Users\Ralph> ssh iobpi3@iobroker-pi3
iobpi3@iobroker-pi3's password:
Linux iobroker-pi3 6.18.34+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.18.34-1+rpt1 (2026-06-09) aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Jul 26 14:44:41 2026 from 192.168.178.23
iobpi3@iobroker-pi3:~ $ iob fix
library: loaded
Library version=2026-04-11
ioBroker or some processes are still running:
22922 iobroker.js-con
22976 io.admin.0
22991 io.backitup.0
23054 io.discovery.0
Please stop them first and try again!
iobpi3@iobroker-pi3:~ $ iob stop
iobpi3@iobroker-pi3:~ $ iob fix
library: loaded
Library version=2026-04-11

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2025-09-18

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/5)
==========================================================================

Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://deb.debian.org/debian-security trixie-security InRelease
Hit:4 http://archive.raspberrypi.com/debian trixie InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists... Done

==========================================================================
    Checking ioBroker user and directory permissions (2/5)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...
ACL enabled: true

==========================================================================
    Check and cleanup npm temporary directories (3/5)
==========================================================================

Done.

==========================================================================
    Database maintenance (4/5)
==========================================================================

Checking for uncompressed JSONL databases... This might take a while!

Compressing /opt/iobroker/iobroker-data/states.jsonl
Compressing /opt/iobroker/iobroker-data/objects.jsonl
Compressed 2 JSONL files. Done

==========================================================================
    Checking autostart (5/5)
==========================================================================

==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ====
Authentication is required to stop 'iobroker.service'.
Authenticating as: Raspberry Pi OS (iobpi3)
Password:
polkit-agent-helper-1: pam_authenticate failed: Authentication failure
==== AUTHENTICATION FAILED ====
Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

Homoran

@krcm sagte:

Es sieht eigentlich jetzt nicht schlecht aus

Mag sein?
Warte mal bis du ein paar wenige Instanzen laufen hast und lass dann mal top laufen

krcm

Ok ich komme auf die Web oberfläche und kann konfigurieren hier die Ausgabe von TOP:


Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Jul 26 15:37:09 2026 from 192.168.178.23
iobpi3@iobroker-pi3:~ $ top
top - 15:45:31 up  2:47,  1 user,  load average: 0.05, 0.26, 0.44
Tasks: 135 total,   1 running, 134 sleeping,   0 stopped,   0 zombie
%Cpu(s):  1.2 us,  0.2 sy,  0.0 ni, 98.3 id,  0.1 wa,  0.0 hi,  0.2 si,  0.0 st
MiB Mem :    905.1 total,    216.8 free,    525.8 used,    227.5 buff/cache
MiB Swap:    905.0 total,    855.8 free,     49.2 used.    379.3 avail Mem

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
  25285 iobroker  20   0   10.9g 178740  49988 S   3.0  19.3   0:49.64 iobroker.js-con
  25304 iobroker  20   0   21.1g 185212  56828 S   2.3  20.0   0:33.10 io.admin.0
  25502 iobpi3    20   0   10196   5432   3320 R   1.0   0.6   0:00.19 top
    571 root      20   0  342152   6040   4876 S   0.3   0.7   0:03.57 NetworkManager
      1 root      20   0   25376   9724   6944 S   0.0   1.0   1:08.46 systemd
      2 root      20   0       0      0      0 S   0.0   0.0   0:00.02 kthreadd
      3 root      20   0       0      0      0 S   0.0   0.0   0:00.00 pool_workqueue_release
      4 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-rcu_gp
      5 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-sync_wq
      6 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-kvfree_rcu_reclaim
      7 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-slub_flushwq
      8 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-netns
     13 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-mm_percpu_wq
     14 root      20   0       0      0      0 S   0.0   0.0   0:00.18 ksoftirqd/0
     15 root      20   0       0      0      0 I   0.0   0.0   0:03.36 rcu_preempt
     16 root      20   0       0      0      0 S   0.0   0.0   0:00.00 rcu_exp_par_gp_kthread_worker/0
     17 root      20   0       0      0      0 S   0.0   0.0   0:00.00 rcu_exp_gp_kthread_worker
     18 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/0
     19 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/0
     20 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/1
     21 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/1
     22 root      20   0       0      0      0 S   0.0   0.0   0:00.14 ksoftirqd/1
     25 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/2
     26 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/2
     27 root      20   0       0      0      0 S   0.0   0.0   0:00.12 ksoftirqd/2
     30 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/3
     31 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/3
     32 root      20   0       0      0      0 S   0.0   0.0   0:00.13 ksoftirqd/3
     35 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kdevtmpfs
     36 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-inet_frag_wq
     37 root      20   0       0      0      0 I   0.0   0.0   0:00.00 rcu_tasks_kthread
     38 root      20   0       0      0      0 I   0.0   0.0   0:00.00 rcu_tasks_rude_kthread
     39 root      20   0       0      0      0 I   0.0   0.0   0:00.00 rcu_tasks_trace_kthread
     40 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kauditd
     42 root      20   0       0      0      0 S   0.0   0.0   0:00.01 khungtaskd
     43 root      20   0       0      0      0 S   0.0   0.0   0:00.00 oom_reaper
     44 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-writeback
     45 root      20   0       0      0      0 S   0.0   0.0   0:05.87 kcompactd0
     47 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-kblockd
     48 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/R-blkcg_punt_bio

krcm

Danke für Eure Hilfe!!

Thomas Braun

@krcm

Dann hau jetzt mal ein

iob diag

raus. Müsste ja jetzt funktionieren.

krcm

Hallo Thomas, hier die Ausgabe von iob diag. Allerdings läuft parallel im Browser die Anwendung soll ich die vorher stoppen?```
*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

Some output is masked. For full results please use 'iob diag --unmask' *

Press any key to continue

Thomas Braun

@krcm

Das ist nicht die Ausgabe, das ist der 'Vorspann'.

krcm

So jetzt :-):

========== Start marking the full check here ===========

```bash
Script v.2026-06-06

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: iobroker-pi3
       Icon name: computer
          Kernel: Linux 6.18.34+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 3 Model B Rev 1.2

Docker          : false
Virtualization  : none
Unknown

Kernel          : aarch64
Userland        : 64bit

System was installed 38 days ago (on 2026-06-18).

Systemuptime and Load:
 15:54:58 up  2:56,  1 user,  load average: 0.77, 0.63, 0.55
CPU threads     : 4

*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sun 2026-07-26 15:54:59 CEST
           Universal time: Sun 2026-07-26 13:54:59 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
iobpi3
HOME=/home/iobpi3
GROUPS=iobpi3 adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input lpadmin iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         Unknown
Display-Manager:        Not found
Desktop:
Session:                tty
Boot Target:            multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            949M        601M        157M        3.5M        260M        347M
Swap:           948M        100M        848M
Total:          1.9G        702M        1.0G

Active iob-Instances:   4

          905 M total memory
          573 M used memory
          457 M active memory
          138 M inactive memory
          149 M free memory
            8 M buffer memory
          240 M swap cache
          904 M total swap
           95 M used swap
          809 M free swap

*** top - Table Of Processes  ***
top - 15:55:00 up  2:56,  1 user,  load average: 0.77, 0.63, 0.55
Tasks: 149 total,   2 running, 147 sleeping,   0 stopped,   0 zombie
%Cpu(s): 12.7 us,  3.6 sy,  0.0 ni, 81.8 id,  1.8 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :    905.1 total,    149.7 free,    573.7 used,    249.2 buff/cache
MiB Swap:    905.0 total,    809.2 free,     95.8 used.    331.4 avail Mem

*** FAILED SERVICES ***
  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.

*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  318M     0  318M   0% /dev
tmpfs          tmpfs     182M   17M  165M  10% /run
/dev/mmcblk0p2 ext4       15G  4.2G  9.3G  31% /
tmpfs          tmpfs     453M     0  453M   0% /dev/shm
tmpfs          tmpfs     5.0M   12K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     453M  2.6M  451M   1% /tmp
/dev/mmcblk0p1 vfat      505M   66M  439M  14% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs      91M  8.0K   91M   1% /run/user/1000

Messages concerning filesystems in dmesg:
[Sun Jul 26 12:58:22 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sun Jul 26 12:58:22 2026] EXT4-fs (mmcblk0p2): mounted filesystem 15f4c6be-1102-4331-9904-f78e78afd1fd ro with ordered data mode. Quota mode: none.
[Sun Jul 26 12:58:26 2026] EXT4-fs (mmcblk0p2): re-mounted 15f4c6be-1102-4331-9904-f78e78afd1fd r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:
/var:
1.3G    /var/
233M    /var/cache
228M    /var/cache/apt
180M    /var/lib
148M    /var/lib/apt
Archived and active journals take up 15.8M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
72M     /opt/iobroker/iobroker-data/
65M     /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
7.5M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BeQV_TGa.js
7.0M    /opt/iobroker/iobroker-data/objects.jsonl
3.7M    /opt/iobroker/iobroker-data/files/backitup.admin/custom/assets/index-Byv11PyV.js
3.7M    /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js
3.7M    /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-IIKn7Ixx.js

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
No nvbackup.json found.

*** NodeJS-Installation ***

/usr/bin/nodejs         v22.23.1
/usr/bin/node           v22.23.1
/usr/bin/npm            10.9.8
/usr/bin/npx            10.9.8

✓ Node.js installation is correct

nodejs:
  Installed: 22.23.1-1nodesource1
  Candidate: 22.23.1-1nodesource1
  Version table:
 *** 22.23.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.23.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1+deb13u2 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:
No known Vulnerabilities detected!


*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobroker-pi3        iobroker-pi3 (version: 7.1.2, hostname: iobroker-pi3  , alive, uptime: 1028)

Core adapters versions
js-controller:  7.1.2
admin:          7.8.23
javascript:     "javascript" not found

nodejs modules from github:     0


Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker-pi3                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : iobroker-pi3                             -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker-pi3                             -  enabled
+ system.adapter.history.0                : history               : iobroker-pi3                             -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker-pi3                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin


ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none


Installed ioBroker-Adapters
┌─────────┬────────────────────────────┬─────────────┬──────────┬────────────────┐
│ (index) │ id                         │ name        │ version  │ upgrade policy │
├─────────┼────────────────────────────┼─────────────┼──────────┼────────────────┤
│ 0       │ 'system.adapter.admin'     │ 'admin'     │ '7.8.23' │ 'none'         │
│ 1       │ 'system.adapter.backitup'  │ 'backitup'  │ '3.3.17' │ 'none'         │
│ 2       │ 'system.adapter.discovery' │ 'discovery' │ '5.0.0'  │ 'none'         │
│ 3       │ 'system.adapter.history'   │ 'history'   │ '4.0.0'  │ 'none'         │
└─────────┴────────────────────────────┴─────────────┴──────────┴────────────────┘


ioBroker-Adapter Versions and update status
Used repository: stable
Adapter    "admin"        : 7.8.23   , installed 7.8.23
Adapter    "backitup"     : 3.3.17   , installed 3.3.17
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "history"      : 4.0.0    , installed 4.0.0
Controller "js-controller": 7.2.2    , installed 7.1.2  [Updatable]


Objects and States
Please stand by - This may take a while

Objects:        181
States:         130

*** OS-Repositories and Updates ***

Hit:1 http://archive.raspberrypi.com/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...

Pending systemupdates: 0

*** Listening Ports ***
Netid State  Recv-Q Send-Q Local Address:Port   Peer Address:PortProcess                                                
udp   UNCONN 0      0            0.0.0.0:mdns        0.0.0.0:*    users:(("avahi-daemon",pid=538,fd=12))                
udp   UNCONN 0      0            0.0.0.0:48611       0.0.0.0:*    users:(("avahi-daemon",pid=538,fd=14))                
udp   UNCONN 0      0            0.0.0.0:5678        0.0.0.0:*    users:(("io.discovery.0",pid=25328,fd=30))            
udp   UNCONN 0      0            0.0.0.0:sunrpc      0.0.0.0:*    users:(("rpcbind",pid=22159,fd=5),("systemd",pid=1,fd=161))
udp   UNCONN 0      0                  *:mdns              *:*    users:(("avahi-daemon",pid=538,fd=13))                
udp   UNCONN 0      0                  *:53263             *:*    users:(("avahi-daemon",pid=538,fd=15))                
udp   UNCONN 0      0                  *:sunrpc            *:*    users:(("rpcbind",pid=22159,fd=7),("systemd",pid=1,fd=169))
tcp   LISTEN 0      4096         0.0.0.0:sunrpc      0.0.0.0:*    users:(("rpcbind",pid=22159,fd=4),("systemd",pid=1,fd=160))
tcp   LISTEN 0      128          0.0.0.0:ssh         0.0.0.0:*    users:(("sshd",pid=991,fd=6))                         
tcp   LISTEN 0      511        127.0.0.1:9000        0.0.0.0:*    users:(("iobroker.js-con",pid=25285,fd=29))           
tcp   LISTEN 0      511        127.0.0.1:9001        0.0.0.0:*    users:(("iobroker.js-con",pid=25285,fd=23))           
tcp   LISTEN 0      4096            [::]:sunrpc         [::]:*    users:(("rpcbind",pid=22159,fd=6),("systemd",pid=1,fd=168))
tcp   LISTEN 0      128             [::]:ssh            [::]:*    users:(("sshd",pid=991,fd=7))                         
tcp   LISTEN 0      511                *:tproxy            *:*    users:(("io.admin.0",pid=25505,fd=34))                


*** Log File - Last 25 Lines ***
2026-07-26 15:54:24.076  - info: host.iobroker-pi3 iobroker Installing iobroker.history@4.0.0... (System call)
2026-07-26 15:54:36.136  - info: host.iobroker-pi3 iobroker added 1 package in 12s
2026-07-26 15:54:36.139  - info: host.iobroker-pi3 iobroker 112 packages are looking for funding  run `npm fund` for details
2026-07-26 15:54:36.564  - info: host.iobroker-pi3 iobroker host.iobroker-pi3 install adapter history
2026-07-26 15:54:36.661  - info: host.iobroker-pi3 iobroker upload [13] history.admin /opt/iobroker/node_modules/iobroker.history/admin/history.png history.png image/png
2026-07-26 15:54:36.688  - info: host.iobroker-pi3 iobroker upload [12] history.admin /opt/iobroker/node_modules/iobroker.history/admin/history.psd history.psd image/vnd.adobe.photoshop
2026-07-26 15:54:36.768  - info: host.iobroker-pi3 iobroker upload [11] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/de.json i18n/de.json application/json
2026-07-26 15:54:37.162  - info: host.iobroker-pi3 iobroker upload [10] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/en.json i18n/en.json application/json
2026-07-26 15:54:37.178  - info: host.iobroker-pi3 iobroker upload [9] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/es.json i18n/es.json application/json
2026-07-26 15:54:37.192  - info: host.iobroker-pi3 iobroker upload [8] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/fr.json i18n/fr.json application/json
2026-07-26 15:54:37.207  - info: host.iobroker-pi3 iobroker upload [7] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/it.json i18n/it.json application/json
2026-07-26 15:54:37.221  - info: host.iobroker-pi3 iobroker upload [6] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/nl.json i18n/nl.json application/json
2026-07-26 15:54:37.247  - info: host.iobroker-pi3 iobroker upload [5] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/pl.json i18n/pl.json application/json
2026-07-26 15:54:37.266  - info: host.iobroker-pi3 iobroker upload [4] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/pt.json i18n/pt.json application/json
2026-07-26 15:54:37.316  - info: host.iobroker-pi3 iobroker upload [3] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/ru.json i18n/ru.json application/json
2026-07-26 15:54:37.353  - info: host.iobroker-pi3 iobroker upload [2] history.admin /opt/iobroker/node_modules/iobroker.history/admin/i18n/zh-cn.json i18n/zh-cn.json application/json
2026-07-26 15:54:37.367  - info: host.iobroker-pi3 iobroker upload [1] history.admin /opt/iobroker/node_modules/iobroker.history/admin/jsonConfig.json jsonConfig.json application/json
2026-07-26 15:54:37.380  - info: host.iobroker-pi3 iobroker upload [0] history.admin /opt/iobroker/node_modules/iobroker.history/admin/jsonCustom.json jsonCustom.json application/json
2026-07-26 15:54:37.449  - info: host.iobroker-pi3 iobroker host.iobroker-pi3 object system.adapter.history created/updated
2026-07-26 15:54:37.456  - info: host.iobroker-pi3 iobroker Updating objects from io-package.json for adapter "history" with version "4.0.0"
2026-07-26 15:54:38.563  - info: host.iobroker-pi3 iobroker exit 0
2026-07-26 15:54:38.698  - info: host.iobroker-pi3 Set hostname iobroker-pi3 for system.adapter.history.0
2026-07-26 15:54:39.686  - info: host.iobroker-pi3 instance system.adapter.history.0 in version "4.0.0" started with pid 26225
2026-07-26 15:54:45.219  - info: history.0 (26225) starting. Version 4.0.0 in /opt/iobroker/node_modules/iobroker.history, node: v22.23.1, js-controller: 7.1.2
2026-07-26 15:54:45.329  - info: history.0 (26225) Set default history instance to "history.0"

============= Mark until here for C&P =============

iob diag has finished.

Homoran

@krcm sagte:

Mem: 949M 601M 157M 3.5M 260M 347M

Und das bei

@krcm sagte:

Active iob-Instances: 4

krcm

Ja das ist zu knapp. Trotzdem vielen Dank für Eure hilfe. Wieder was gelernt

krcm

Aber das JS Controller Update auf die 7.2.2 (das vorher nicht mehr ging und der Grund letzlich für das neuaufsetzen war) hat jetzt noch geklappt :-)

Community Forum

NEWS

Installation ioBroker bricht mit npm error code 22 ab

Support us

403

33.0k

83.5k

1.3m