Test Adapter e3oncan - Viessmann E3 Serie einbinden
-
@damichi85 Im Beta-Repo ist jetzt die Version 1.0.1 verfügbar. Kleiner Bugfix. Und mit Klick auf das Badge "xxx scheduled" kann man nun nach genau diesen DIDs filtern.
-
@damichi85 Im Beta-Repo ist jetzt die Version 1.0.1 verfügbar. Kleiner Bugfix. Und mit Klick auf das Badge "xxx scheduled" kann man nun nach genau diesen DIDs filtern.
-
Hab da mal ne Frage. Muß der CAN-Bus Adapter am PI stecken auf dem ioBroker installiert ist?
-
Hab da mal ne Frage. Muß der CAN-Bus Adapter am PI stecken auf dem ioBroker installiert ist?
@Beowolf Ja, das ist die Standard-Konfiguration. Falls der ioBroker-Raspi zu weit weg ist, gibt es weitere Möglichkeiten
- Einen älteren zusätzlichen Raspi beim CAN-Bus installieren und ioBroker als Master-Slave aufsetzen
- Cannelloni verwenden und die CAN-Bus Daten über TCP/IP tunneln. Dazu reicht ein Raspi-Zero am CAN-Bus. Das wird auf beiden Rechner installiert, auf dem ioBroker-Raspi sind die Daten dann auf einem virtuellen CAN-Bus (vcan0) verfügbar. Den trägt man im e3oncan-Adapter ein.
-
Bekomme seit seit Mitte Mai UDS timeout auf allen Datenpunkten die ich abfrage. Geändert hatte ich nichts, keine Updates oder ähnliches.
Es wird angezeigt, dass der Dienst oder Gerät nicht verbunden ist. Habe alles kontrolliert, konnte keinen Fehler feststellen.
Komisch ist allerdings, dass es keinen Error über can0 gibt.
Wie kann ich e3oncan wieder zum Leben erwecken, ohne timeout error?
Was könnte das Problem sein?
-
Bekomme seit seit Mitte Mai UDS timeout auf allen Datenpunkten die ich abfrage. Geändert hatte ich nichts, keine Updates oder ähnliches.
Es wird angezeigt, dass der Dienst oder Gerät nicht verbunden ist. Habe alles kontrolliert, konnte keinen Fehler feststellen.
Komisch ist allerdings, dass es keinen Error über can0 gibt.
Wie kann ich e3oncan wieder zum Leben erwecken, ohne timeout error?
Was könnte das Problem sein?
@RaspiCan
Was steht denn zu einem Kaltstart der Instanz im Log?iob logs --watchanschauen. Oder gleich das 'große Ganze' per
iob diag -
Bekomme seit seit Mitte Mai UDS timeout auf allen Datenpunkten die ich abfrage. Geändert hatte ich nichts, keine Updates oder ähnliches.
Es wird angezeigt, dass der Dienst oder Gerät nicht verbunden ist. Habe alles kontrolliert, konnte keinen Fehler feststellen.
Komisch ist allerdings, dass es keinen Error über can0 gibt.
Wie kann ich e3oncan wieder zum Leben erwecken, ohne timeout error?
Was könnte das Problem sein?
@RaspiCan Hast Du in node.js-Upgrade gemacht? Dann gibt es zwei Möglichkeiten:
- das native Modul socketcan neu compilieren mit
iob stop e3oncan && iob rebuild && iob start e3oncan- siehe auch im Readme - Upgrade auf e3oncan v1.0.3 - da ist dieses Problem komplett behoben, da der Entwickler von socketcan sein Modul auf non-native umgestellt hat. Allerdings bringt 1.0.3 viele Updates von Datenpunkten, da ist ziemlich sicher Nacharbeit notwendig. Auch hier gilt: Siehe Readme.
Falls Du kein node.js-Upgrade gemacht hast: Poste die Log.Einträge beim Start des Adapters.
- das native Modul socketcan neu compilieren mit
-
2026-06-05 14:08:23.658 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852
habe kein Update gemacht
-
========== Start marking the full check here =========== Script v.2026-06-01 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64bit System was installed 451 days ago (on 2025-03-10). Systemuptime and Load: 14:15:45 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-06-05 14:15:45 CEST Universal time: Fri 2026-06-05 12:15:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: no NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': raspi HOME=/home/raspi GROUPS=raspi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty Boot Target: graphical.target System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.2G 874M 23M 2.0G 2.8G Swap: 0B 0B 0B Total: 4.0G 1.2G 874M Active iob-Instances: 8 3795 M total memory 1153 M used memory 1604 M active memory 1043 M inactive memory 834 M free memory 106 M buffer memory 1791 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 14:15:46 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 14.3 us, 14.3 sy, 0.0 ni, 71.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.8 total, 834.2 free, 1153.5 used, 1898.5 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 2642.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 379M 1% /run /dev/sda2 ext4 916G 19G 851G 3% / tmpfs tmpfs 1.9G 224K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 511M 70M 442M 14% /boot/firmware tmpfs tmpfs 380M 48K 380M 1% /run/user/1000 /dev/mmcblk0p2 ext4 58G 8.0G 48G 15% /media/raspi/rootfs /dev/mmcblk0p1 vfat 510M 68M 443M 14% /media/raspi/bootfs Messages concerning filesystems in dmesg: [Fri Jun 5 11:47:43 2026] EXT4-fs (sda2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none. [Fri Jun 5 11:47:44 2026] EXT4-fs (sda2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): recovery complete [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro |-/media/raspi/rootfs /dev/mmcblk0p2 ext4 rw,nosuid,nodev,relatime,errors=remount-ro `-/media/raspi/bootfs /dev/mmcblk0p1 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,utf8,flush,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 1.1G /var/cache/apt 1.1G /var/cache 962M /var/cache/apt/archives 666M /var/log Archived and active journals take up 664.5M in the file system. /opt/iobroker/backups: 3.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 5.6G /opt/iobroker/iobroker-data/ 5.4G /opt/iobroker/iobroker-data/history 87M /opt/iobroker/iobroker-data/files 55M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 4.3M /opt/iobroker/iobroker-data/history/20260221/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260318/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260315/history.Drehzahl Verdichter Wärmepumpe.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v20.20.2 /usr/bin/node v20.20.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 ✓ Node.js installation is correct nodejs: Installed: 20.20.2-1nodesource1 Candidate: 20.20.2-1nodesource1 Version table: *** 20.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.6-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.5-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Vulnerabilities detected in the Node.js version! node:fs:2380 return binding.writeFileUtf8( ^ Error: EACCES: permission denied, open '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' at Object.writeFileSync (node:fs:2380:20) at ClientRequest.<anonymous> (/home/iobroker/node_modules/is-my-node-vulnerable/is-vulnerable.js:82:12) at Object.onceWrapper (node:events:639:26) at ClientRequest.emit (node:events:524:28) at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:702:27) at HTTPParser.parserOnHeadersComplete (node:_http_common:118:17) at TLSSocket.socketOnData (node:_http_client:544:22) at TLSSocket.emit (node:events:524:28) at addChunk (node:internal/streams/readable:561:12) at readableAddChunkPushByteMode (node:internal/streams/readable:512:3) { errno: -13, code: 'EACCES', syscall: 'open', path: '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' } Node.js v20.20.2 npm notice npm notice New major version of npm available! 10.8.2 -> 11.16.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.16.0 npm notice To update run: npm install -g npm@11.16.0 npm notice *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 7713) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.e3oncan.0 : e3oncan : raspberrypi - enabled system.adapter.e3oncan.1 : e3oncan : raspberrypi - disabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬────────────────────────────┬─────────────┬───────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼────────────────────────────┼─────────────┼───────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.7.22' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.14' │ 'none' │ │ 2 │ 'system.adapter.discovery' │ 'discovery' │ '5.0.0' │ 'none' │ │ 3 │ 'system.adapter.e3oncan' │ 'e3oncan' │ '0.10.14' │ 'none' │ │ 4 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 5 │ 'system.adapter.history' │ 'history' │ '3.0.1' │ 'none' │ │ 6 │ 'system.adapter.socketio' │ 'socketio' │ '6.7.1' │ 'none' │ │ 7 │ 'system.adapter.web' │ 'web' │ '7.0.8' │ 'none' │ │ 8 │ 'system.adapter.ws' │ 'ws' │ '2.6.2' │ 'none' │ └─────────┴────────────────────────────┴─────────────┴───────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.7.22 [Updatable] Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "e3oncan" : 0.11.3 , installed 0.10.14 [Updatable] Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "history" : 4.0.0 , installed 3.0.1 [Updatable] Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "web" : 8.0.0 , installed 7.0.8 [Updatable] Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Objects and States Please stand by - This may take a while Objects: 5587 States: 5466 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://mschneider82.github.io/vieventlog stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=12)) udp UNCONN 0 0 0.0.0.0:54621 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=14)) udp UNCONN 0 0 *:37406 *:* users:(("avahi-daemon",pid=495,fd=15)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=495,fd=13)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=14888,fd=3)) tcp LISTEN 0 128 127.0.0.1:ipp 0.0.0.0:* users:(("cupsd",pid=629,fd=7)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=25)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=19)) tcp LISTEN 0 4096 *:5000 *:* users:(("vieventlog",pid=25918,fd=5)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=14888,fd=4)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=24561,fd=32)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=25014,fd=27)) tcp LISTEN 0 16 *:5900 *:* users:(("wayvnc",pid=680,fd=9)) tcp LISTEN 0 128 [::1]:ipp [::]:* users:(("cupsd",pid=629,fd=6)) *** Log File - Last 25 Lines *** 2026-06-05 14:15:39.649 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:15:40.255 - error: e3oncan.0 (27942) UDS timeout on 0x680.1393 2026-06-05 14:15:43.778 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:47.152 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:15:47.757 - error: e3oncan.0 (27942) UDS timeout on 0x680.1769 2026-06-05 14:15:53.765 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:54.691 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:15:55.262 - error: e3oncan.0 (27942) UDS timeout on 0x680.1770 2026-06-05 14:16:02.212 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:02.773 - error: e3oncan.0 (27942) UDS timeout on 0x680.1771 2026-06-05 14:16:03.772 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:09.724 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:10.287 - error: e3oncan.0 (27942) UDS timeout on 0x680.1772 2026-06-05 14:16:13.791 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:17.238 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:17.800 - error: e3oncan.0 (27942) UDS timeout on 0x680.1773 2026-06-05 14:16:23.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:24.750 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:25.316 - error: e3oncan.0 (27942) UDS timeout on 0x680.1774 2026-06-05 14:16:32.273 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:32.832 - error: e3oncan.0 (27942) UDS timeout on 0x680.1775 2026-06-05 14:16:33.794 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:39.804 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:40.371 - error: e3oncan.0 (27942) UDS timeout on 0x680.1776 2026-06-05 14:16:43.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442============= Mark until here for C&P =============
iob diag has finished.
-
========== Start marking the full check here =========== Script v.2026-06-01 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64bit System was installed 451 days ago (on 2025-03-10). Systemuptime and Load: 14:15:45 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-06-05 14:15:45 CEST Universal time: Fri 2026-06-05 12:15:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: no NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': raspi HOME=/home/raspi GROUPS=raspi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty Boot Target: graphical.target System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.2G 874M 23M 2.0G 2.8G Swap: 0B 0B 0B Total: 4.0G 1.2G 874M Active iob-Instances: 8 3795 M total memory 1153 M used memory 1604 M active memory 1043 M inactive memory 834 M free memory 106 M buffer memory 1791 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 14:15:46 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 14.3 us, 14.3 sy, 0.0 ni, 71.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.8 total, 834.2 free, 1153.5 used, 1898.5 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 2642.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 379M 1% /run /dev/sda2 ext4 916G 19G 851G 3% / tmpfs tmpfs 1.9G 224K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 511M 70M 442M 14% /boot/firmware tmpfs tmpfs 380M 48K 380M 1% /run/user/1000 /dev/mmcblk0p2 ext4 58G 8.0G 48G 15% /media/raspi/rootfs /dev/mmcblk0p1 vfat 510M 68M 443M 14% /media/raspi/bootfs Messages concerning filesystems in dmesg: [Fri Jun 5 11:47:43 2026] EXT4-fs (sda2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none. [Fri Jun 5 11:47:44 2026] EXT4-fs (sda2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): recovery complete [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro |-/media/raspi/rootfs /dev/mmcblk0p2 ext4 rw,nosuid,nodev,relatime,errors=remount-ro `-/media/raspi/bootfs /dev/mmcblk0p1 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,utf8,flush,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 1.1G /var/cache/apt 1.1G /var/cache 962M /var/cache/apt/archives 666M /var/log Archived and active journals take up 664.5M in the file system. /opt/iobroker/backups: 3.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 5.6G /opt/iobroker/iobroker-data/ 5.4G /opt/iobroker/iobroker-data/history 87M /opt/iobroker/iobroker-data/files 55M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 4.3M /opt/iobroker/iobroker-data/history/20260221/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260318/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260315/history.Drehzahl Verdichter Wärmepumpe.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v20.20.2 /usr/bin/node v20.20.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 ✓ Node.js installation is correct nodejs: Installed: 20.20.2-1nodesource1 Candidate: 20.20.2-1nodesource1 Version table: *** 20.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.6-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.5-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Vulnerabilities detected in the Node.js version! node:fs:2380 return binding.writeFileUtf8( ^ Error: EACCES: permission denied, open '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' at Object.writeFileSync (node:fs:2380:20) at ClientRequest.<anonymous> (/home/iobroker/node_modules/is-my-node-vulnerable/is-vulnerable.js:82:12) at Object.onceWrapper (node:events:639:26) at ClientRequest.emit (node:events:524:28) at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:702:27) at HTTPParser.parserOnHeadersComplete (node:_http_common:118:17) at TLSSocket.socketOnData (node:_http_client:544:22) at TLSSocket.emit (node:events:524:28) at addChunk (node:internal/streams/readable:561:12) at readableAddChunkPushByteMode (node:internal/streams/readable:512:3) { errno: -13, code: 'EACCES', syscall: 'open', path: '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' } Node.js v20.20.2 npm notice npm notice New major version of npm available! 10.8.2 -> 11.16.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.16.0 npm notice To update run: npm install -g npm@11.16.0 npm notice *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 7713) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.e3oncan.0 : e3oncan : raspberrypi - enabled system.adapter.e3oncan.1 : e3oncan : raspberrypi - disabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬────────────────────────────┬─────────────┬───────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼────────────────────────────┼─────────────┼───────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.7.22' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.14' │ 'none' │ │ 2 │ 'system.adapter.discovery' │ 'discovery' │ '5.0.0' │ 'none' │ │ 3 │ 'system.adapter.e3oncan' │ 'e3oncan' │ '0.10.14' │ 'none' │ │ 4 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 5 │ 'system.adapter.history' │ 'history' │ '3.0.1' │ 'none' │ │ 6 │ 'system.adapter.socketio' │ 'socketio' │ '6.7.1' │ 'none' │ │ 7 │ 'system.adapter.web' │ 'web' │ '7.0.8' │ 'none' │ │ 8 │ 'system.adapter.ws' │ 'ws' │ '2.6.2' │ 'none' │ └─────────┴────────────────────────────┴─────────────┴───────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.7.22 [Updatable] Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "e3oncan" : 0.11.3 , installed 0.10.14 [Updatable] Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "history" : 4.0.0 , installed 3.0.1 [Updatable] Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "web" : 8.0.0 , installed 7.0.8 [Updatable] Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Objects and States Please stand by - This may take a while Objects: 5587 States: 5466 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://mschneider82.github.io/vieventlog stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=12)) udp UNCONN 0 0 0.0.0.0:54621 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=14)) udp UNCONN 0 0 *:37406 *:* users:(("avahi-daemon",pid=495,fd=15)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=495,fd=13)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=14888,fd=3)) tcp LISTEN 0 128 127.0.0.1:ipp 0.0.0.0:* users:(("cupsd",pid=629,fd=7)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=25)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=19)) tcp LISTEN 0 4096 *:5000 *:* users:(("vieventlog",pid=25918,fd=5)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=14888,fd=4)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=24561,fd=32)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=25014,fd=27)) tcp LISTEN 0 16 *:5900 *:* users:(("wayvnc",pid=680,fd=9)) tcp LISTEN 0 128 [::1]:ipp [::]:* users:(("cupsd",pid=629,fd=6)) *** Log File - Last 25 Lines *** 2026-06-05 14:15:39.649 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:15:40.255 - error: e3oncan.0 (27942) UDS timeout on 0x680.1393 2026-06-05 14:15:43.778 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:47.152 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:15:47.757 - error: e3oncan.0 (27942) UDS timeout on 0x680.1769 2026-06-05 14:15:53.765 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:54.691 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:15:55.262 - error: e3oncan.0 (27942) UDS timeout on 0x680.1770 2026-06-05 14:16:02.212 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:02.773 - error: e3oncan.0 (27942) UDS timeout on 0x680.1771 2026-06-05 14:16:03.772 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:09.724 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:10.287 - error: e3oncan.0 (27942) UDS timeout on 0x680.1772 2026-06-05 14:16:13.791 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:17.238 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:17.800 - error: e3oncan.0 (27942) UDS timeout on 0x680.1773 2026-06-05 14:16:23.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:24.750 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:25.316 - error: e3oncan.0 (27942) UDS timeout on 0x680.1774 2026-06-05 14:16:32.273 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:32.832 - error: e3oncan.0 (27942) UDS timeout on 0x680.1775 2026-06-05 14:16:33.794 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:39.804 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:40.371 - error: e3oncan.0 (27942) UDS timeout on 0x680.1776 2026-06-05 14:16:43.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442============= Mark until here for C&P =============
iob diag has finished.
Setz das in CodeTags.
Oder kopier das komplett, inkl. der dafür vorgesehenen Kopiermarken. -
-
Es fehlen die öffnenden CodeTags.
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!
Bring das auf die aktuelle Version.
Und bring auch nodejs auf die aktuell für den ioBroker vorgesehene Version 22.SWAP würde ich auch einrichten.
-
========== Start marking the full check here =========== Script v.2026-06-01 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64bit System was installed 451 days ago (on 2025-03-10). Systemuptime and Load: 14:15:45 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-06-05 14:15:45 CEST Universal time: Fri 2026-06-05 12:15:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: no NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': raspi HOME=/home/raspi GROUPS=raspi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty Boot Target: graphical.target System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.2G 874M 23M 2.0G 2.8G Swap: 0B 0B 0B Total: 4.0G 1.2G 874M Active iob-Instances: 8 3795 M total memory 1153 M used memory 1604 M active memory 1043 M inactive memory 834 M free memory 106 M buffer memory 1791 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 14:15:46 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 14.3 us, 14.3 sy, 0.0 ni, 71.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.8 total, 834.2 free, 1153.5 used, 1898.5 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 2642.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 379M 1% /run /dev/sda2 ext4 916G 19G 851G 3% / tmpfs tmpfs 1.9G 224K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 511M 70M 442M 14% /boot/firmware tmpfs tmpfs 380M 48K 380M 1% /run/user/1000 /dev/mmcblk0p2 ext4 58G 8.0G 48G 15% /media/raspi/rootfs /dev/mmcblk0p1 vfat 510M 68M 443M 14% /media/raspi/bootfs Messages concerning filesystems in dmesg: [Fri Jun 5 11:47:43 2026] EXT4-fs (sda2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none. [Fri Jun 5 11:47:44 2026] EXT4-fs (sda2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): recovery complete [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro |-/media/raspi/rootfs /dev/mmcblk0p2 ext4 rw,nosuid,nodev,relatime,errors=remount-ro `-/media/raspi/bootfs /dev/mmcblk0p1 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,utf8,flush,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 1.1G /var/cache/apt 1.1G /var/cache 962M /var/cache/apt/archives 666M /var/log Archived and active journals take up 664.5M in the file system. /opt/iobroker/backups: 3.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 5.6G /opt/iobroker/iobroker-data/ 5.4G /opt/iobroker/iobroker-data/history 87M /opt/iobroker/iobroker-data/files 55M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 4.3M /opt/iobroker/iobroker-data/history/20260221/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260318/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260315/history.Drehzahl Verdichter Wärmepumpe.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v20.20.2 /usr/bin/node v20.20.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 ✓ Node.js installation is correct nodejs: Installed: 20.20.2-1nodesource1 Candidate: 20.20.2-1nodesource1 Version table: *** 20.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.6-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.5-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Vulnerabilities detected in the Node.js version! node:fs:2380 return binding.writeFileUtf8( ^ Error: EACCES: permission denied, open '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' at Object.writeFileSync (node:fs:2380:20) at ClientRequest.<anonymous> (/home/iobroker/node_modules/is-my-node-vulnerable/is-vulnerable.js:82:12) at Object.onceWrapper (node:events:639:26) at ClientRequest.emit (node:events:524:28) at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:702:27) at HTTPParser.parserOnHeadersComplete (node:_http_common:118:17) at TLSSocket.socketOnData (node:_http_client:544:22) at TLSSocket.emit (node:events:524:28) at addChunk (node:internal/streams/readable:561:12) at readableAddChunkPushByteMode (node:internal/streams/readable:512:3) { errno: -13, code: 'EACCES', syscall: 'open', path: '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' } Node.js v20.20.2 npm notice npm notice New major version of npm available! 10.8.2 -> 11.16.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.16.0 npm notice To update run: npm install -g npm@11.16.0 npm notice *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 7713) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.e3oncan.0 : e3oncan : raspberrypi - enabled system.adapter.e3oncan.1 : e3oncan : raspberrypi - disabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬────────────────────────────┬─────────────┬───────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼────────────────────────────┼─────────────┼───────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.7.22' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.14' │ 'none' │ │ 2 │ 'system.adapter.discovery' │ 'discovery' │ '5.0.0' │ 'none' │ │ 3 │ 'system.adapter.e3oncan' │ 'e3oncan' │ '0.10.14' │ 'none' │ │ 4 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 5 │ 'system.adapter.history' │ 'history' │ '3.0.1' │ 'none' │ │ 6 │ 'system.adapter.socketio' │ 'socketio' │ '6.7.1' │ 'none' │ │ 7 │ 'system.adapter.web' │ 'web' │ '7.0.8' │ 'none' │ │ 8 │ 'system.adapter.ws' │ 'ws' │ '2.6.2' │ 'none' │ └─────────┴────────────────────────────┴─────────────┴───────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.7.22 [Updatable] Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "e3oncan" : 0.11.3 , installed 0.10.14 [Updatable] Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "history" : 4.0.0 , installed 3.0.1 [Updatable] Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "web" : 8.0.0 , installed 7.0.8 [Updatable] Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Objects and States Please stand by - This may take a while Objects: 5587 States: 5466 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://mschneider82.github.io/vieventlog stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=12)) udp UNCONN 0 0 0.0.0.0:54621 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=14)) udp UNCONN 0 0 *:37406 *:* users:(("avahi-daemon",pid=495,fd=15)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=495,fd=13)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=14888,fd=3)) tcp LISTEN 0 128 127.0.0.1:ipp 0.0.0.0:* users:(("cupsd",pid=629,fd=7)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=25)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=19)) tcp LISTEN 0 4096 *:5000 *:* users:(("vieventlog",pid=25918,fd=5)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=14888,fd=4)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=24561,fd=32)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=25014,fd=27)) tcp LISTEN 0 16 *:5900 *:* users:(("wayvnc",pid=680,fd=9)) tcp LISTEN 0 128 [::1]:ipp [::]:* users:(("cupsd",pid=629,fd=6)) *** Log File - Last 25 Lines *** 2026-06-05 14:15:39.649 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:15:40.255 - error: e3oncan.0 (27942) UDS timeout on 0x680.1393 2026-06-05 14:15:43.778 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:47.152 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:15:47.757 - error: e3oncan.0 (27942) UDS timeout on 0x680.1769 2026-06-05 14:15:53.765 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:54.691 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:15:55.262 - error: e3oncan.0 (27942) UDS timeout on 0x680.1770 2026-06-05 14:16:02.212 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:02.773 - error: e3oncan.0 (27942) UDS timeout on 0x680.1771 2026-06-05 14:16:03.772 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:09.724 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:10.287 - error: e3oncan.0 (27942) UDS timeout on 0x680.1772 2026-06-05 14:16:13.791 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:17.238 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:17.800 - error: e3oncan.0 (27942) UDS timeout on 0x680.1773 2026-06-05 14:16:23.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:24.750 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:25.316 - error: e3oncan.0 (27942) UDS timeout on 0x680.1774 2026-06-05 14:16:32.273 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:32.832 - error: e3oncan.0 (27942) UDS timeout on 0x680.1775 2026-06-05 14:16:33.794 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:39.804 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:40.371 - error: e3oncan.0 (27942) UDS timeout on 0x680.1776 2026-06-05 14:16:43.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442============= Mark until here for C&P =============
iob diag has finished.
-
========== Start marking the full check here =========== Script v.2026-06-01 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.62+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64bit System was installed 451 days ago (on 2025-03-10). Systemuptime and Load: 14:15:45 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-06-05 14:15:45 CEST Universal time: Fri 2026-06-05 12:15:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: no NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': raspi HOME=/home/raspi GROUPS=raspi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty Boot Target: graphical.target System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.2G 874M 23M 2.0G 2.8G Swap: 0B 0B 0B Total: 4.0G 1.2G 874M Active iob-Instances: 8 3795 M total memory 1153 M used memory 1604 M active memory 1043 M inactive memory 834 M free memory 106 M buffer memory 1791 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 14:15:46 up 2:28, 7 users, load average: 0.13, 0.05, 0.01 Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 14.3 us, 14.3 sy, 0.0 ni, 71.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.8 total, 834.2 free, 1153.5 used, 1898.5 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 2642.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 379M 1% /run /dev/sda2 ext4 916G 19G 851G 3% / tmpfs tmpfs 1.9G 224K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 511M 70M 442M 14% /boot/firmware tmpfs tmpfs 380M 48K 380M 1% /run/user/1000 /dev/mmcblk0p2 ext4 58G 8.0G 48G 15% /media/raspi/rootfs /dev/mmcblk0p1 vfat 510M 68M 443M 14% /media/raspi/bootfs Messages concerning filesystems in dmesg: [Fri Jun 5 11:47:43 2026] EXT4-fs (sda2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none. [Fri Jun 5 11:47:44 2026] EXT4-fs (sda2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): recovery complete [Fri Jun 5 11:47:52 2026] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro |-/media/raspi/rootfs /dev/mmcblk0p2 ext4 rw,nosuid,nodev,relatime,errors=remount-ro `-/media/raspi/bootfs /dev/mmcblk0p1 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,utf8,flush,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 1.1G /var/cache/apt 1.1G /var/cache 962M /var/cache/apt/archives 666M /var/log Archived and active journals take up 664.5M in the file system. /opt/iobroker/backups: 3.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 5.6G /opt/iobroker/iobroker-data/ 5.4G /opt/iobroker/iobroker-data/history 87M /opt/iobroker/iobroker-data/files 55M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BDfRPp5J.js 4.3M /opt/iobroker/iobroker-data/history/20260221/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260318/history.Drehzahl Verdichter Wärmepumpe.json 4.2M /opt/iobroker/iobroker-data/history/20260315/history.Drehzahl Verdichter Wärmepumpe.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v20.20.2 /usr/bin/node v20.20.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 ✓ Node.js installation is correct nodejs: Installed: 20.20.2-1nodesource1 Candidate: 20.20.2-1nodesource1 Version table: *** 20.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.6-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.5-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Vulnerabilities detected in the Node.js version! node:fs:2380 return binding.writeFileUtf8( ^ Error: EACCES: permission denied, open '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' at Object.writeFileSync (node:fs:2380:20) at ClientRequest.<anonymous> (/home/iobroker/node_modules/is-my-node-vulnerable/is-vulnerable.js:82:12) at Object.onceWrapper (node:events:639:26) at ClientRequest.emit (node:events:524:28) at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:702:27) at HTTPParser.parserOnHeadersComplete (node:_http_common:118:17) at TLSSocket.socketOnData (node:_http_client:544:22) at TLSSocket.emit (node:events:524:28) at addChunk (node:internal/streams/readable:561:12) at readableAddChunkPushByteMode (node:internal/streams/readable:512:3) { errno: -13, code: 'EACCES', syscall: 'open', path: '/home/iobroker/node_modules/is-my-node-vulnerable/schedule.etag' } Node.js v20.20.2 npm notice npm notice New major version of npm available! 10.8.2 -> 11.16.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.16.0 npm notice To update run: npm install -g npm@11.16.0 npm notice *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 7713) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.e3oncan.0 : e3oncan : raspberrypi - enabled system.adapter.e3oncan.1 : e3oncan : raspberrypi - disabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬────────────────────────────┬─────────────┬───────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼────────────────────────────┼─────────────┼───────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.7.22' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.14' │ 'none' │ │ 2 │ 'system.adapter.discovery' │ 'discovery' │ '5.0.0' │ 'none' │ │ 3 │ 'system.adapter.e3oncan' │ 'e3oncan' │ '0.10.14' │ 'none' │ │ 4 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 5 │ 'system.adapter.history' │ 'history' │ '3.0.1' │ 'none' │ │ 6 │ 'system.adapter.socketio' │ 'socketio' │ '6.7.1' │ 'none' │ │ 7 │ 'system.adapter.web' │ 'web' │ '7.0.8' │ 'none' │ │ 8 │ 'system.adapter.ws' │ 'ws' │ '2.6.2' │ 'none' │ └─────────┴────────────────────────────┴─────────────┴───────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.7.22 [Updatable] Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "e3oncan" : 0.11.3 , installed 0.10.14 [Updatable] Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "history" : 4.0.0 , installed 3.0.1 [Updatable] Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "web" : 8.0.0 , installed 7.0.8 [Updatable] Adapter "ws" : 4.0.0 , installed 3.0.19 [Updatable] Objects and States Please stand by - This may take a while Objects: 5587 States: 5466 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://mschneider82.github.io/vieventlog stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=12)) udp UNCONN 0 0 0.0.0.0:54621 0.0.0.0:* users:(("avahi-daemon",pid=495,fd=14)) udp UNCONN 0 0 *:37406 *:* users:(("avahi-daemon",pid=495,fd=15)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=495,fd=13)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=14888,fd=3)) tcp LISTEN 0 128 127.0.0.1:ipp 0.0.0.0:* users:(("cupsd",pid=629,fd=7)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=25)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=24529,fd=19)) tcp LISTEN 0 4096 *:5000 *:* users:(("vieventlog",pid=25918,fd=5)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=14888,fd=4)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=24561,fd=32)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=25014,fd=27)) tcp LISTEN 0 16 *:5900 *:* users:(("wayvnc",pid=680,fd=9)) tcp LISTEN 0 128 [::1]:ipp [::]:* users:(("cupsd",pid=629,fd=6)) *** Log File - Last 25 Lines *** 2026-06-05 14:15:39.649 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:15:40.255 - error: e3oncan.0 (27942) UDS timeout on 0x680.1393 2026-06-05 14:15:43.778 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:47.152 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:15:47.757 - error: e3oncan.0 (27942) UDS timeout on 0x680.1769 2026-06-05 14:15:53.765 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:15:54.691 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:15:55.262 - error: e3oncan.0 (27942) UDS timeout on 0x680.1770 2026-06-05 14:16:02.212 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:02.773 - error: e3oncan.0 (27942) UDS timeout on 0x680.1771 2026-06-05 14:16:03.772 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:09.724 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:10.287 - error: e3oncan.0 (27942) UDS timeout on 0x680.1772 2026-06-05 14:16:13.791 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:17.238 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:17.800 - error: e3oncan.0 (27942) UDS timeout on 0x680.1773 2026-06-05 14:16:23.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:24.750 - error: e3oncan.0 (27942) UDS timeout on 0x68c.388 2026-06-05 14:16:25.316 - error: e3oncan.0 (27942) UDS timeout on 0x680.1774 2026-06-05 14:16:32.273 - error: e3oncan.0 (27942) UDS timeout on 0x68c.390 2026-06-05 14:16:32.832 - error: e3oncan.0 (27942) UDS timeout on 0x680.1775 2026-06-05 14:16:33.794 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442 2026-06-05 14:16:39.804 - error: e3oncan.0 (27942) UDS timeout on 0x68c.2852 2026-06-05 14:16:40.371 - error: e3oncan.0 (27942) UDS timeout on 0x680.1776 2026-06-05 14:16:43.784 - error: e3oncan.0 (27942) UDS timeout on 0x6cf.2442============= Mark until here for C&P =============
iob diag has finished.
-
-
@raspican Ich würde immer noch gerne die Log-Einträge beim Start des e3oncan-Adapters sehen.
Ja, würde allerdings auf einem System mit aktuellem Stand sinnvoller sein. Die ioBroker-Adapter sind ja auch alle pflegebedürftig, inkl.
Adapter "e3oncan" : 0.11.3 , installed 0.10.14 [Updatable]
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
458
Online32.9k
Benutzer83.1k
Themen1.3m
Beiträge