UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[dogfight76]

@thomas-braun said in Meldung über Zeitfehler - Was ist das ?:

Das kannst du schon mal auf Version 12 'Bookworm' bringen. Geht beim Raspberry aber nur per Neuinstallation.

Hallo,

so, habe das Upgrade auf die aktuelle Version Bookworm gemacht. Dann Updates installiert , von Bookworm und auch iobroker.
Wollte dir die Ausgabe von "iob diag" zeigen, aber da kommt diese Meldung:

dogfight76@ioBroker-neu:~ $ iob update
Used repository: stable
Adapter    "admin"        : 7.6.3    , installed 7.6.3
Adapter    "backitup"     : 3.0.31   , installed 3.0.31
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Controller "js-controller": 7.0.6    , installed 7.0.6
dogfight76@ioBroker-neu:~ $ iob diag
/usr/bin/iob: line 21: /home/iobroker/iob_diag.log: Permission denied
dogfight76@ioBroker-neu:~ $ sudo iob diag

***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.
dogfight76@ioBroker-neu:~ $ iob diag
/usr/bin/iob: line 21: /home/iobroker/iob_diag.log: Permission denied
dogfight76@ioBroker-neu:~ $

[Homoran]

@dogfight76 sagte in Meldung über Zeitfehler - Was ist das ?:

habe das Upgrade auf die aktuelle Version Bookworm gemacht.

Bei RaspiOS kann man dieses Upgrade nicht (so einfach) durchführen.
Da geht im Prinzip nur Neuinstallation!

[dogfight76]

@homoran

Ist eine komplette Neusinatllation gemacht worden !
Hatte einen Pi 4 Modell A rumliegen , mit 128GB miscroSD und daruaf alles frisch aufgesetzt ! Bis halt zu dem Punkt "iob diag"

[Homoran]

@dogfight76 wie hast du den user angelegt?
wie hast du iobroker installiert?

• mit welchem user?

[Thomas Braun]

@dogfight76 sagte in Meldung über Zeitfehler - Was ist das ?:

Permission denied

Der user dogfight76 ist vermutlich nicht in der richtigen Gruppe. Oder der wurde nach der Installation noch nicht neueingeloggt.

[dogfight76]

Guten morgen,

@homoran said in Meldung über Zeitfehler - Was ist das ?:

wie hast du iobroker installiert?

Nach dieser Anleitung hier aus dem Forum:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht

Und danach mein ioBroker-Backup eingespielt.

Gruß

[Homoran]

@dogfight76 sagte in Meldung über Zeitfehler - Was ist das ?:

Nach dieser Anleitung hier aus dem Forum:

und die Antwort auf die zweite Frage?

@homoran sagte in Meldung über Zeitfehler - Was ist das ?:

mit welchem user?

[Thomas Braun]

@dogfight76

Hast du unmittelbar nach der Installation den dogfight76 abgemeldet?
Hast du unmittelbar nach der Installation den iob fix ausgefürht?
Zeig die Ausgabe von

groups
ls -l /home

[dogfight76]

Hallo,

angemldet im ioBroker ? Ist der User gemeint ?
Im ioBroker angemeldet mit vergebenem User und meinem vergebenem Passwort.

Die Anleitung einfach bis zum Ende abgearbeitet ,dann die Update/Upgrade Befehle ausgeführt
Danach im ioBroker angemeldet und das Backup eingespielt.

Dann wollte ich über putty den Befehle "iob diag" durchlaufen lassen um das Ergebnis hier für die Kontrolle einzufügen.
Da kam der Fehler......

Gruß

[dogfight76]

@thomas-braun said in Meldung über Zeitfehler - Was ist das ?:

Hast du unmittelbar nach der Installation den iob fix ausgefürht?
Zeig die Ausgabe von

Habe "iob stop" und dann "iob fix" ausgeführt.
Die Ausgabe dazu:

dogfight76@ioBroker-neu:~ $ iob stop
dogfight76@ioBroker-neu:~ $ iob fix
library: loaded
Library version=2024-10-22

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 205-02-02

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/5)
==========================================================================

Hit:1 http://deb.debian.org/debian bookworm InRelease
Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Get:3 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Get:5 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [231 kB]
Get:6 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [246 kB]
Hit:7 http://archive.raspberrypi.com/debian bookworm InRelease
Fetched 580 kB in 1s (421 kB/s)
Reading package lists... Done

==========================================================================
    Checking ioBroker user and directory permissions (2/5)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...

==========================================================================
    Check and cleanup npm temporary directories (3/5)
==========================================================================

Done.

==========================================================================
    Database maintenance (4/5)
==========================================================================

Checking for uncompressed JSONL databases... This might take a while!

Compressing /opt/iobroker/iobroker-data/states.jsonl
Compressing /opt/iobroker/iobroker-data/objects.jsonl
Compressed 2 JSONL files. Done

==========================================================================
    Checking autostart (5/5)
==========================================================================

==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ====
Authentication is required to stop 'iobroker.service'.
Authenticating as: ,,, (dogfight76)
Password: polkit-agent-helper-1: pam_authenticate failed: Authentication failure
!%GunffiEnabling autostart...
ighterAutostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

Jezt "iob start" gemacht. Dann die Abfrage "ls -l /home"
Ergebnis:

dogfight76@ioBroker-neu:~ $ ls -l /home
total 8
drwx------ 5 dogfight76 dogfight76 4096 Apr  5 10:59 dogfight76
drwxr-xr-x 3 iobroker   iobroker   4096 Apr  5 10:59 iobroker
dogfight76@ioBroker-neu:~ $

[dogfight76]

Jetzt geht auch der Befehl:
"iob diag"

Läuft gerade, Ergebnis kommt sofort

Edit für Ergebnis:

Copy text starting here:

```bash
======================= SUMMARY =======================
                        v.2025-02-23


 Static hostname: ioBroker-neu
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.12.20+rpt-rpi-v8
    Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               64 bit
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
Display-Server:         false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:
/usr/bin/nodejs         v20.19.0
/usr/bin/node           v20.19.0
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.31.0

Recommended versions are nodejs 20.19.0 and npm 10.8.2
nodeJS installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.1G        2.2G        1.2M        807M        2.9G
Swap:           536M          0B        536M
Total:          4.5G        1.1G        2.7G

Active iob-Instances:   13
Upgrade policy: none

ioBroker Core:          js-controller           7.0.6
                        admin                   7.6.3

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : ioBroker-neu                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : ioBroker-neu                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                1150
States:                 882

Size of iob-Database:

12M     /opt/iobroker/iobroker-data/objects.jsonl
684K    /opt/iobroker/iobroker-data/states.jsonl


Operating System is the current Debian stable version codenamed 'bookworm'!

=================== END OF SUMMARY ====================

Das Ergebniss Fenster ist neu in der Version "Bookworm" ?

@thomas-braun

[Thomas Braun]

@dogfight76 sagte in Meldung über Zeitfehler - Was ist das ?:

Das Ergebniss Fenster ist neu in der Version "Bookworm" ?

Nein.
Gib mal die Langfassung.

[dogfight76]

@thomas-braun
Moment.....

Edit Ergebnis @Thomas-braun

========== Start marking the full check here ===========

```bash
Script v.2025-02-23

*** BASE SYSTEM ***
 Static hostname: ioBroker-neu
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.12.20+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 11:21:44 up 23 min,  2 users,  load average: 0.23, 0.27, 0.32
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sat 2025-04-05 11:21:44 CEST
           Universal time: Sat 2025-04-05 09:21:44 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
dogfight76
HOME=/home/dogfight76
GROUPS=dogfight76 adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.1G        2.2G        1.2M        808M        2.9G
Swap:           536M          0B        536M
Total:          4.5G        1.1G        2.7G

Active iob-Instances:   14

         3791 M total memory
         1003 M used memory
          971 M active memory
          490 M inactive memory
         2093 M free memory
          100 M buffer memory
          670 M swap cache
          511 M total swap
            0 M used swap
          511 M free swap

*** top - Table Of Processes  ***
top - 11:21:45 up 23 min,  2 users,  load average: 0.23, 0.27, 0.32
Tasks: 182 total,   1 running, 181 sleeping,   0 stopped,   0 zombie
%Cpu(s): 20.0 us,  0.0 sy,  0.0 ni, 80.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3791.4 total,   2094.0 free,   1003.5 used,    770.7 buff/cache
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   2787.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4      117G  5.7G  106G   6% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   56M  455M  11% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Apr  5 10:58:20 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:0D:BC:95 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=d72bd49f-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Sat Apr  5 10:58:23 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Sat Apr  5 10:58:24 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
936M    /var/
204M    /var/cache
199M    /var/cache/apt
167M    /var/lib
135M    /var/lib/apt/lists

Archived and active journals take up 52.0M in the file system.

/opt/iobroker/backups:
8.5M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
740M    /opt/iobroker/iobroker-data/
727M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
12M     /opt/iobroker/iobroker-data/objects.jsonl
8.7M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/838.0aa41cb0.chunk.js.map
8.6M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/310.89a60ae1.chunk.js.map
7.0M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.a9c6d34a.chunk.js.map
7.0M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.7e9d7842.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.0
/usr/bin/node           v20.19.0
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.31.0

nodejs:
  Installed: 20.19.0-1nodesource1
  Candidate: 20.19.0-1nodesource1
  Version table:
 *** 20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
ioBroker-neu        ioBroker-neu (version: 7.0.6, hostname: ioBroker-neu  , alive, uptime: 1188)

Core adapters versions
js-controller:  7.0.6
admin:          7.6.3
javascript:     8.8.3

nodejs modules from github:     1
+-- iobroker.time-switch@2.2.2 (git+ssh://git@github.com/walli545/ioBroker.time-switch.git#45b5addb484d270dcac6d1bfdb1a9f86b444d80e)

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBroker-neu                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : ioBroker-neu                             -  enabled
+ system.adapter.chromecast.0             : chromecast            : ioBroker-neu                             -  enabled
+ system.adapter.cloud.0                  : cloud                 : ioBroker-neu                             -  enabled
  system.adapter.discovery.0              : discovery             : ioBroker-neu                             - disabled
  system.adapter.fritzdect.0              : fritzdect             : ioBroker-neu                             - disabled
+ system.adapter.history.0                : history               : ioBroker-neu                             -  enabled
  system.adapter.hm-rega.0                : hm-rega               : ioBroker-neu                             - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : ioBroker-neu                             - disabled, port: 18701
  system.adapter.hm-rpc.1                 : hm-rpc                : ioBroker-neu                             - disabled, port: 12001
  system.adapter.hm-rpc.2                 : hm-rpc                : ioBroker-neu                             - disabled, port: 12010
  system.adapter.influxdb.0               : influxdb              : ioBroker-neu                             - disabled, port: 8086
+ system.adapter.jarvis.0                 : jarvis                : ioBroker-neu                             -  enabled
+ system.adapter.javascript.0             : javascript            : ioBroker-neu                             -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker-neu                             -  enabled, port: 8885, bind: 192.168.178.174
+ system.adapter.net-tools.0              : net-tools             : ioBroker-neu                             -  enabled
+ system.adapter.ping.0                   : ping                  : ioBroker-neu                             -  enabled
  system.adapter.solarlog.0               : solarlog              : ioBroker-neu                             - disabled, port: 80
+ system.adapter.time-switch.0            : time-switch           : ioBroker-neu                             -  enabled
  system.adapter.tr-064.0                 : tr-064                : ioBroker-neu                             - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : ioBroker-neu                             -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : ioBroker-neu                             - disabled
  system.adapter.vis.0                    : vis                   : ioBroker-neu                             -  enabled
+ system.adapter.web.0                    : web                   : ioBroker-neu                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBroker-neu                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker-neu                             -  enabled, port: 8885, bind: 192.168.178.174
+ system.adapter.web.0                    : web                   : ioBroker-neu                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.6.3    , installed 7.6.3
Adapter    "backitup"     : 3.0.31   , installed 3.0.31
Adapter    "chromecast"   : 4.0.0    , installed 4.0.0
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "fritzdect"    : 2.5.11   , installed 2.5.11
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "net-tools"    : 1.0.11   , installed 1.0.11
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "solarlog"     : 2.3.0    , installed 2.3.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.4
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19

Objects and States
Please stand by - This may take a while
Objects:        1150
States:         883

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:2 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:3 http://deb.debian.org/debian bookworm InRelease
Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:5 http://deb.debian.org/debian bookworm-updates InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.178.174:8885    0.0.0.0:*               LISTEN      1001       26077      4548/io.mqtt.0
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       11133      2261/io.jarvis.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          4810       600/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       11712      2059/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       11707      2059/iobroker.js-co
tcp6       0      0 :::22                   :::*                    LISTEN      0          4812       600/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       11777      2077/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       13592      2377/io.web.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       12637      2173/io.chromecast.
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        561        461/avahi-daemon: r
udp        0      0 0.0.0.0:34298           0.0.0.0:*                           104        563        461/avahi-daemon: r
udp6       0      0 fe80::6a9e:ba30:f44:546 :::*                                0          767        539/NetworkManager
udp6       0      0 :::5353                 :::*                                104        562        461/avahi-daemon: r
udp6       0      0 :::44980                :::*                                104        564        461/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-04-05 11:14:36.201  - info: mqtt.0 (4120) terminating
2025-04-05 11:14:36.264  - info: host.ioBroker-neu instance system.adapter.mqtt.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-04-05 11:14:39.629  - info: host.ioBroker-neu instance system.adapter.mqtt.0 in version "6.1.2" started with pid 4139
2025-04-05 11:14:42.180  - info: mqtt.0 (4139) starting. Version 6.1.2 in /opt/iobroker/node_modules/iobroker.mqtt, node: v20.19.0, js-controller: 7.0.6
2025-04-05 11:14:42.542  - info: mqtt.0 (4139) Starting MQTT server on 0.0.0.0:8885
2025-04-05 11:14:42.547  - info: host.ioBroker-neu stopInstance system.adapter.mqtt.0 (force=false, process=true)
2025-04-05 11:14:42.560  - info: mqtt.0 (4139) Got terminate signal TERMINATE_YOURSELF
2025-04-05 11:14:42.564  - info: mqtt.0 (4139) terminating
2025-04-05 11:14:42.566  - info: mqtt.0 (4139) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-04-05 11:14:42.619  - info: host.ioBroker-neu stopInstance system.adapter.mqtt.0 send kill signal
2025-04-05 11:14:43.069  - info: mqtt.0 (4139) terminating
2025-04-05 11:14:43.138  - info: host.ioBroker-neu instance system.adapter.mqtt.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-04-05 11:14:46.552  - info: host.ioBroker-neu instance system.adapter.mqtt.0 in version "6.1.2" started with pid 4185
2025-04-05 11:14:49.095  - info: mqtt.0 (4185) starting. Version 6.1.2 in /opt/iobroker/node_modules/iobroker.mqtt, node: v20.19.0, js-controller: 7.0.6
2025-04-05 11:14:49.433  - info: mqtt.0 (4185) Starting MQTT server on 0.0.0.0:8885
2025-04-05 11:19:36.808  - info: host.ioBroker-neu stopInstance system.adapter.mqtt.0 (force=false, process=true)
2025-04-05 11:19:36.815  - info: mqtt.0 (4185) Got terminate signal TERMINATE_YOURSELF
2025-04-05 11:19:36.819  - info: mqtt.0 (4185) terminating
2025-04-05 11:19:36.821  - info: mqtt.0 (4185) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-04-05 11:19:36.853  - info: host.ioBroker-neu stopInstance system.adapter.mqtt.0 send kill signal
2025-04-05 11:19:37.324  - info: mqtt.0 (4185) terminating
2025-04-05 11:19:37.402  - info: host.ioBroker-neu instance system.adapter.mqtt.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-04-05 11:19:40.810  - info: host.ioBroker-neu instance system.adapter.mqtt.0 in version "6.1.2" started with pid 4548
2025-04-05 11:19:43.269  - info: mqtt.0 (4548) starting. Version 6.1.2 in /opt/iobroker/node_modules/iobroker.mqtt, node: v20.19.0, js-controller: 7.0.6
2025-04-05 11:19:43.590  - info: mqtt.0 (4548) Starting MQTT server on 192.168.178.174:8885



============ Mark until here for C&P =============

[Thomas Braun]

@dogfight76

Jetzt ist es sauber.

[dogfight76]

Da der Pi ja ein anderer ist als vorher , hat sich die IP geändert auf 192.168.178.174 (vorher .140)

Jetzt meckert die MQTT-Instanz , weil dort ja die .140 eingetragen war.

Ich also in den Settings von mqtt die IP im Auswahlfenster geändert auf:

(ipv4) 192.168.178.174-wlan0 , beim Port steht ja die 8885.
Muss das der Port sein wo man die VIS aufruft ?

[Thomas Braun]

@dogfight76

mqtt hat mit der vis nix zu schaffen. Natürlich lauschen die Dienste auf unterschiedlichen Ports.

[dogfight76]

Ok, danke.

Aber warum zeigt mir die Instanz vom mqtt jetzt an:
Verbunden - grün
Lebenszeichen - grün
Verbunden - rot

Die Einstellungen in der Instanz mit der neuen IP stimmen doch, oder nicht ?

[Thomas Braun]

@dogfight76 sagte in Meldung über Zeitfehler - Was ist das ?:

Aber warum

Schau in das Log.

[dogfight76]

@thomas-braun
Im Log vom ioBroker steht was den mqtt betrifft:

mqtt.0
	2025-04-05 12:03:05.677	info	Starting MQTT server on 192.168.178.174:8885
mqtt.0
	2025-04-05 12:03:05.278	info	starting. Version 6.1.2 in /opt/iobroker/node_modules/iobroker.mqtt, node: v20.19.0, js-controller: 7.0.6
mqtt.0
	2025-04-05 12:02:58.680	info	terminating
mqtt.0
	2025-04-05 12:02:58.177	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
mqtt.0
	2025-04-05 12:02:58.175	info	terminating
mqtt.0
	2025-04-05 12:02:58.173	info	Got terminate signal TERMINATE_YOURSELF

[Homoran]

@dogfight76 wissen die clients von der neuen IP?