Test Adapter rpi2 2.x

Garfonso

@moppedman said in Test Adapter rpi2 2.x:

Kann es sein das im Betriebssystem für die GPIOs dieses Verhalten hinterlegt ist. Wenn ich das richtig gelesen habe wurden die GPIO von der Pi Foundation völlig neu aufgesetzt.

Ja, das ist meine Vermutung, dass es daran liegt. Ich habe extra nochmal in die alte Bibliothek reingeguckt, ob die da irgendwas macht. Aber da passiert beim beenden überall nichts.

Wenn das wichtig ist, könnte man das vielleicht als zusätzlichen Konfigurationsparameter beim Ausgang mit dazu geben.

Garfonso

@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/

Frohe Weihnachten trotzdem. :-)

searcher57

@garfonso said in Test Adapter rpi2 2.x:

@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/

Frohe Weihnachten trotzdem. :-)

Habe ich in GitHub schon gemacht, aber hier nochmal:

rpi2.0
	2024-12-24 11:25:59.212	warn	If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start.
rpi2.0
	2024-12-24 11:25:59.212	warn	Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter.
rpi2.0
	2024-12-24 11:25:59.211	warn	Cannot initialize GPIO: No chip found. GPIO functionality disabled!
rpi2.0
	2024-12-24 11:25:58.956	info	starting. Version 2.2.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.18.1, js-controller: 7.0.3
rpi2.0
	2024-12-24 11:25:51.507	info	terminating
rpi2.0
	2024-12-24 11:25:51.008	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
rpi2.0
	2024-12-24 11:25:51.008	info	terminating
rpi2.0
	2024-12-24 11:25:51.006	info	Got terminate signal TERMINATE_YOURSELF

Auch Dir frohe und besinnliche Weihnachten!

searcher57

@garfonso said in Test Adapter rpi2 2.x:

@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/

Frohe Weihnachten trotzdem. :-)

So jetzt hab ich es!

rpi2.0
	2024-12-26 16:37:21.190	debug	wlan disabled -> clean up.
rpi2.0
	2024-12-26 16:37:21.190	debug	-1
rpi2.0
	2024-12-26 16:37:21.190	debug	CURRENT = wlan false
rpi2.0
	2024-12-26 16:37:21.190	debug	uptime disabled -> clean up.
rpi2.0
	2024-12-26 16:37:21.189	debug	-1
rpi2.0
	2024-12-26 16:37:21.189	debug	CURRENT = uptime false
rpi2.0
	2024-12-26 16:37:21.189	debug	temperature disabled -> clean up.
rpi2.0
	2024-12-26 16:37:21.189	debug	-1
rpi2.0
	2024-12-26 16:37:21.189	debug	CURRENT = temperature false
rpi2.0
	2024-12-26 16:37:21.188	debug	swap disabled -> clean up.
rpi2.0
	2024-12-26 16:37:21.188	debug	-1
rpi2.0
	2024-12-26 16:37:21.188	debug	CURRENT = swap false
rpi2.0
	2024-12-26 16:37:21.188	debug	sdcard disabled -> clean up.
rpi2.0
	2024-12-26 16:37:21.188	debug	-1
rpi2.0
	2024-12-26 16:37:21.188	debug	CURRENT = sdcard false
rpi2.0
	2024-12-26 16:37:21.141	debug	SETSTATE FOR rpi2.0.network.net_send VALUE = 37315299695
rpi2.0
	2024-12-26 16:37:21.141	debug	---> POST: for net_send in [object Object]
rpi2.0
	2024-12-26 16:37:21.089	debug	SETSTATE FOR rpi2.0.network.net_received VALUE = -32564790012
rpi2.0
	2024-12-26 16:37:21.089	debug	VALUE: 32564790012 POST: $1*-1
rpi2.0
	2024-12-26 16:37:21.089	debug	---> POST: $1*-1 for net_received in [object Object]
rpi2.0
	2024-12-26 16:37:21.089	debug	-1
rpi2.0
	2024-12-26 16:37:21.088	debug	CURRENT = network true
rpi2.0
	2024-12-26 16:37:21.041	debug	SETSTATE FOR rpi2.0.memory.memory_available VALUE = 5125.67
rpi2.0
	2024-12-26 16:37:21.041	debug	VALUE: 5248688 POST: $1/1024
rpi2.0
	2024-12-26 16:37:21.040	debug	---> POST: $1/1024 for memory_available in [object Object]
rpi2.0
	2024-12-26 16:37:20.993	debug	SETSTATE FOR rpi2.0.memory.memory_free VALUE = 1112.42
rpi2.0
	2024-12-26 16:37:20.993	debug	VALUE: 1139120 POST: $1/1024
rpi2.0
	2024-12-26 16:37:20.992	debug	---> POST: $1/1024 for memory_free in [object Object]
rpi2.0
	2024-12-26 16:37:20.945	debug	SETSTATE FOR rpi2.0.memory.memory_total VALUE = 8052.33
rpi2.0
	2024-12-26 16:37:20.945	debug	VALUE: 8245584 POST: $1/1024
rpi2.0
	2024-12-26 16:37:20.945	debug	---> POST: $1/1024 for memory_total in [object Object]
rpi2.0
	2024-12-26 16:37:20.944	debug	-1
rpi2.0
	2024-12-26 16:37:20.944	debug	CURRENT = memory true
rpi2.0
	2024-12-26 16:37:20.898	debug	SETSTATE FOR rpi2.0.raspberry.mem_gpu VALUE = 4
rpi2.0
	2024-12-26 16:37:20.897	debug	---> POST: for mem_gpu in [object Object]
rpi2.0
	2024-12-26 16:37:20.852	debug	SETSTATE FOR rpi2.0.raspberry.mem_arm VALUE = 1020
rpi2.0
	2024-12-26 16:37:20.852	debug	---> POST: for mem_arm in [object Object]
rpi2.0
	2024-12-26 16:37:20.805	debug	SETSTATE FOR rpi2.0.raspberry.cpu_voltage VALUE = 0.77
rpi2.0
	2024-12-26 16:37:20.804	debug	---> POST: for cpu_voltage in [object Object]
rpi2.0
	2024-12-26 16:37:20.804	debug	-1
rpi2.0
	2024-12-26 16:37:20.804	debug	CURRENT = raspberry true
rpi2.0
	2024-12-26 16:37:20.756	debug	SETSTATE FOR rpi2.0.cpu.scaling_governor VALUE = ondemand
rpi2.0
	2024-12-26 16:37:20.756	debug	---> POST: for scaling_governor in [object Object]
rpi2.0
	2024-12-26 16:37:20.712	debug	SETSTATE FOR rpi2.0.cpu.load15 VALUE = 0.21
rpi2.0
	2024-12-26 16:37:20.712	debug	NAME: load15 VALUE: 0.21
rpi2.0
	2024-12-26 16:37:20.712	debug	MATCHING: 0.21
rpi2.0
	2024-12-26 16:37:20.666	debug	SETSTATE FOR rpi2.0.cpu.load5 VALUE = 0.31
rpi2.0
	2024-12-26 16:37:20.665	debug	NAME: load5 VALUE: 0.31
rpi2.0
	2024-12-26 16:37:20.665	debug	MATCHING: 0.31
rpi2.0
	2024-12-26 16:37:20.620	debug	SETSTATE FOR rpi2.0.cpu.load1 VALUE = 0.48
rpi2.0
	2024-12-26 16:37:20.620	debug	NAME: load1 VALUE: 0.48
rpi2.0
	2024-12-26 16:37:20.620	debug	MATCHING: 0.48
rpi2.0
	2024-12-26 16:37:20.620	debug	---> POST: for load1,load5,load15 in [object Object]
rpi2.0
	2024-12-26 16:37:20.560	debug	SETSTATE FOR rpi2.0.cpu.cpu_frequency VALUE = 1600
rpi2.0
	2024-12-26 16:37:20.560	debug	VALUE: 1600000 POST: $1/1000
rpi2.0
	2024-12-26 16:37:20.560	debug	---> POST: $1/1000 for cpu_frequency in [object Object]
rpi2.0
	2024-12-26 16:37:20.560	debug	-1
rpi2.0
	2024-12-26 16:37:20.560	debug	CURRENT = cpu true
rpi2.0
	2024-12-26 16:37:20.560	debug	PARSING: wlan
rpi2.0
	2024-12-26 16:37:20.560	debug	PARSING: uptime
rpi2.0
	2024-12-26 16:37:20.559	debug	PARSING: temperature
rpi2.0
	2024-12-26 16:37:20.559	debug	PARSING: swap
rpi2.0
	2024-12-26 16:37:20.559	debug	PARSING: sdcard
rpi2.0
	2024-12-26 16:37:20.559	debug	---> POST:
rpi2.0
	2024-12-26 16:37:20.559	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.559	debug	---> REGEXP: /(.*)/
rpi2.0
	2024-12-26 16:37:20.558	debug	------------- 37315299695
rpi2.0
	2024-12-26 16:37:20.556	debug	---> cat /sys/class/net/e*/statistics/tx_bytes
rpi2.0
	2024-12-26 16:37:20.556	debug	PARSING: net_send
rpi2.0
	2024-12-26 16:37:20.556	debug	---> POST: $1*-1
rpi2.0
	2024-12-26 16:37:20.555	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.555	debug	---> REGEXP: /(.*)/
rpi2.0
	2024-12-26 16:37:20.555	debug	------------- 32564790012
rpi2.0
	2024-12-26 16:37:20.552	debug	---> cat /sys/class/net/e*/statistics/rx_bytes
rpi2.0
	2024-12-26 16:37:20.552	debug	PARSING: net_received
rpi2.0
	2024-12-26 16:37:20.552	debug	PARSING: network
rpi2.0
	2024-12-26 16:37:20.552	debug	---> POST: $1/1024
rpi2.0
	2024-12-26 16:37:20.552	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.552	debug	---> REGEXP: /MemAvailable:\s+(\d+)/m
rpi2.0
	2024-12-26 16:37:20.551	debug	------------- MemTotal: 8245584 kB MemFree: 1138400 kB MemAvailable: 5248688 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254944 kB Inactive: 3335408 kB Active(anon): 2575088 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2573280 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7760 kB PageTables: 145904 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19824 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB
rpi2.0
	2024-12-26 16:37:20.549	debug	---> cat /proc/meminfo
rpi2.0
	2024-12-26 16:37:20.548	debug	PARSING: memory_available
rpi2.0
	2024-12-26 16:37:20.548	debug	---> POST: $1/1024
rpi2.0
	2024-12-26 16:37:20.548	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.548	debug	---> REGEXP: /MemFree:\s+(\d+)/
rpi2.0
	2024-12-26 16:37:20.547	debug	------------- MemTotal: 8245584 kB MemFree: 1139120 kB MemAvailable: 5249408 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254352 kB Inactive: 3335408 kB Active(anon): 2574496 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2572688 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7712 kB PageTables: 145904 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19792 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB
rpi2.0
	2024-12-26 16:37:20.545	debug	---> cat /proc/meminfo
rpi2.0
	2024-12-26 16:37:20.545	debug	PARSING: memory_free
rpi2.0
	2024-12-26 16:37:20.545	debug	---> POST: $1/1024
rpi2.0
	2024-12-26 16:37:20.545	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.544	debug	---> REGEXP: /MemTotal:\s+(\d+)/
rpi2.0
	2024-12-26 16:37:20.544	debug	------------- MemTotal: 8245584 kB MemFree: 1139120 kB MemAvailable: 5249408 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254352 kB Inactive: 3335408 kB Active(anon): 2574496 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2572688 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7712 kB PageTables: 145312 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19792 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB
rpi2.0
	2024-12-26 16:37:20.541	debug	---> cat /proc/meminfo
rpi2.0
	2024-12-26 16:37:20.541	debug	PARSING: memory_total
rpi2.0
	2024-12-26 16:37:20.540	debug	PARSING: memory
rpi2.0
	2024-12-26 16:37:20.540	debug	---> POST:
rpi2.0
	2024-12-26 16:37:20.540	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.540	debug	---> REGEXP: /(\d+)/
rpi2.0
	2024-12-26 16:37:20.539	debug	------------- gpu=4M
rpi2.0
	2024-12-26 16:37:20.535	debug	---> vcgencmd get_mem gpu
rpi2.0
	2024-12-26 16:37:20.535	debug	PARSING: mem_gpu
rpi2.0
	2024-12-26 16:37:20.535	debug	---> POST:
rpi2.0
	2024-12-26 16:37:20.535	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.535	debug	---> REGEXP: /(\d+)/
rpi2.0
	2024-12-26 16:37:20.535	debug	------------- arm=1020M
rpi2.0
	2024-12-26 16:37:20.531	debug	---> vcgencmd get_mem arm
rpi2.0
	2024-12-26 16:37:20.531	debug	PARSING: mem_arm
rpi2.0
	2024-12-26 16:37:20.531	debug	---> POST:
rpi2.0
	2024-12-26 16:37:20.531	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.530	debug	---> REGEXP: /(\d+.\d+)V/
rpi2.0
	2024-12-26 16:37:20.530	debug	------------- volt=0.7659V
rpi2.0
	2024-12-26 16:37:20.526	debug	---> vcgencmd measure_volts core
rpi2.0
	2024-12-26 16:37:20.526	debug	PARSING: cpu_voltage
rpi2.0
	2024-12-26 16:37:20.526	debug	PARSING: raspberry
rpi2.0
	2024-12-26 16:37:20.526	debug	---> POST:
rpi2.0
	2024-12-26 16:37:20.526	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.526	debug	---> REGEXP: /(.*)/
rpi2.0
	2024-12-26 16:37:20.525	debug	------------- ondemand
rpi2.0
	2024-12-26 16:37:20.522	debug	---> cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
rpi2.0
	2024-12-26 16:37:20.522	debug	PARSING: scaling_governor
rpi2.0
	2024-12-26 16:37:20.522	debug	NAME: load15, VALULE: 0.21
rpi2.0
	2024-12-26 16:37:20.522	debug	MATCHING: 0.21
rpi2.0
	2024-12-26 16:37:20.522	debug	NAME: load5, VALULE: 0.31
rpi2.0
	2024-12-26 16:37:20.522	debug	MATCHING: 0.31
rpi2.0
	2024-12-26 16:37:20.522	debug	NAME: load1, VALULE: 0.48
rpi2.0
	2024-12-26 16:37:20.521	debug	MATCHING: 0.48
rpi2.0
	2024-12-26 16:37:20.521	debug	GROUPS: 4
rpi2.0
	2024-12-26 16:37:20.521	debug	---> REGEXP: /^(\S+)\s(\S+)\s(\S+)/
rpi2.0
	2024-12-26 16:37:20.521	debug	------------- 0.48 0.31 0.21 1/480 1339934
rpi2.0
	2024-12-26 16:37:20.518	debug	---> cat /proc/loadavg
rpi2.0
	2024-12-26 16:37:20.518	debug	PARSING: load1,load5,load15
rpi2.0
	2024-12-26 16:37:20.518	debug	---> POST: $1/1000
rpi2.0
	2024-12-26 16:37:20.518	debug	GROUPS: 2
rpi2.0
	2024-12-26 16:37:20.518	debug	---> REGEXP: /(.*)/
rpi2.0
	2024-12-26 16:37:20.517	debug	------------- 1600000
rpi2.0
	2024-12-26 16:37:20.515	debug	---> test -r /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq || test -r /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq || echo -1000
rpi2.0
	2024-12-26 16:37:20.515	debug	PARSING: cpu_frequency
rpi2.0
	2024-12-26 16:37:20.514	debug	PARSING: cpu
rpi2.0
	2024-12-26 16:37:20.514	debug	start parsing
rpi2.0
	2024-12-26 16:36:21.272	debug	GPIO chip undefined initialized
rpi2.0
	2024-12-26 16:36:21.272	debug	Got chip: undefined
rpi2.0
	2024-12-26 16:36:21.271	warn	If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start.
rpi2.0
	2024-12-26 16:36:21.271	warn	Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter.
rpi2.0
	2024-12-26 16:36:21.271	warn	Cannot initialize GPIO: No chip found. GPIO functionality disabled!
rpi2.0
	2024-12-26 16:36:21.271	debug	Using GPIO chip 4 for Raspberry Pi 5 or newer.
rpi2.0
	2024-12-26 16:36:21.271	debug	Got 5 from Raspberry Pi 5 Model B Rev 1.0

Zimbl

Hallo zusammen,

ich würde mich gerne auch an diesem Thema anschließen, ich habe genau das gleiche Problem, ich kann
diese GPIO nicht ansteuern, wenn ich das Probiere, dann wird der Ausgang bzw. in dem Fall True/False rot.

Den Adapter habe ich bereits einmal De-Installiert und dann wieder Installiert.

Aber immer noch alles ohne Erfolg.

Anbei mein Diag :


========== Start marking the full check here ===========

```bash
Script v.2024-10-19

*** BASE SYSTEM ***
 Static hostname: raspihome
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.62+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 10:47:05 up 7 min,  2 users,  load average: 1.06, 0.49, 0.25
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sat 2024-12-28 10:47:05 CET
           Universal time: Sat 2024-12-28 09:47:05 UTC
                 RTC time: Sat 2024-12-28 09:47:05
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.2G        1.4G        2.0G        5.8M        998M        2.9G
Swap:           202M          0B        202M
Total:          4.4G        1.4G        2.2G

Active iob-Instances:   7

         4045 M total memory
         1300 M used memory
         1327 M active memory
          629 M inactive memory
         1862 M free memory
           69 M buffer memory
          883 M swap cache
          192 M total swap
            0 M used swap
          192 M free swap

*** top - Table Of Processes  ***
top - 10:47:05 up 7 min,  2 users,  load average: 1.06, 0.49, 0.25
Tasks: 175 total,   1 running, 174 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   4045.0 total,   1862.7 free,   1300.6 used,    952.3 buff/cache
MiB Swap:    193.0 total,    193.0 free,      0.0 used.   2744.4 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.0G     0  2.0G   0% /dev
tmpfs          tmpfs     405M  5.4M  400M   2% /run
/dev/mmcblk0p2 ext4      6.9G  6.3G  182M  98% /
tmpfs          tmpfs     2.0G     0  2.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   65M  446M  13% /boot/firmware
tmpfs          tmpfs     405M   16K  405M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Dec 28 10:39:15 2024] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave  smsc95xx.macaddr=2C:CF:67:97:18:01 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=918bb801-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GB cfg80211.ieee80211_regdom=GB
[Sat Dec 28 10:39:17 2024] EXT4-fs (mmcblk0p2): mounted filesystem 3b445224-0aeb-4897-9108-009ed4211fb4 ro with ordered data mode. Quota mode: none.
[Sat Dec 28 10:39:19 2024] EXT4-fs (mmcblk0p2): re-mounted 3b445224-0aeb-4897-9108-009ed4211fb4 r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
950M    /var/
445M    /var/cache
431M    /var/cache/apt
317M    /var/cache/apt/archives
185M    /var/lib

Archived and active journals take up 120.5M in the file system.

/opt/iobroker/backups:
18M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
856M    /opt/iobroker/iobroker-data/
772M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
37M     /opt/iobroker/iobroker-data/objects.jsonl
25M     /opt/iobroker/iobroker-data/files/wireless-settings.admin/static/js/main.fe851d24.js.map
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
12M     /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js
11M     /opt/iobroker/iobroker-data/files/wireless-settings.admin/static/js/main.fe851d24.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.1
/usr/bin/node           v20.18.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.4

nodejs:
  Installed: 20.18.1-1nodesource1
  Candidate: 20.18.1-1nodesource1
  Version table:
 *** 20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspihome        raspihome (version: 6.0.11, hostname: raspihome   , alive, uptime: 31)

Core adapters versions
js-controller:  6.0.11
admin:          7.1.5
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspihome                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0               : backitup              : raspihome                              -  enabled
  system.adapter.discovery.0              : discovery             : raspihome                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspihome                              -  enabled
  system.adapter.modbus.0                 : modbus                : raspihome                              -  enabled
  system.adapter.rpi2.0                   : rpi2                  : raspihome                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspihome                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.terminal.0               : terminal              : raspihome                              -  enabled, port: 8088, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.tuya.0                   : tuya                  : raspihome                              -  enabled
  system.adapter.welcome.0                : welcome               : raspihome                              -  enabled, port: 80, bind: 0.0.0.0, run as: admin
  system.adapter.wireless-settings.0      : wireless-settings     : raspihome                              - disabled
+ system.adapter.zigbee.0                 : zigbee                : raspihome                              -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspihome                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.shelly.0                 : shelly                : raspihome                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.terminal.0               : terminal              : raspihome                              -  enabled, port: 8088, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.welcome.0                : welcome               : raspihome                              -  enabled, port: 80, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspihome                              -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 6.0.11 [Updatable]
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "rpi2"         : 2.2.1    , installed 2.2.1
Adapter    "shelly"       : 8.2.1    , installed 8.2.1
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "welcome"      : 1.0.2    , installed 1.0.2
Adapter    "wireless-settings": 1.0.2, installed 1.0.2
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        815
States:         616

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          6337       760/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       19159      4186/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       19164      4186/iobroker.js-co
tcp6       0      0 :::80                   :::*                    LISTEN      1001       22054      4711/io.welcome.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          6339       760/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       19205      4206/io.admin.0
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       22139      4757/io.terminal.0
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       22600      4366/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       22601      4366/io.tuya.0
udp        0      0 0.0.0.0:38105           0.0.0.0:*                           104        656        604/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        654        604/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       20981      4299/io.shelly.0
udp6       0      0 :::34920                :::*                                104        657        604/avahi-daemon: r
udp6       0      0 fe80::9fc3:98f7:bf5:546 :::*                                0          6430       711/NetworkManager
udp6       0      0 fe80::4bfa:4f8a:169:546 :::*                                0          875        711/NetworkManager
udp6       0      0 :::5353                 :::*                                104        655        604/avahi-daemon: r

Thomas Braun

@zimbl sagte in Test Adapter rpi2 2.x:

Controller "js-controller": 7.0.6 , installed 6.0.11 [Updatable]

Auf Stand bringen.

Zimbl · Controller "js-controller": 7.0.6 , installed 6.0.11 [Updatable]

@thomas-braun

oh da habe ich schlechte Erfahrung mit gemacht, diese akt. durchzuführen.

Kannst du mir genau sagen, wie ich da am besten vorgehe ?

Hatte da mal eine Anleitung aus dem Netz gehabt und alles ging irgendwie schief was schief gehen konnte :-)

Thomas Braun

@zimbl sagte in Test Adapter rpi2 2.x:

oh da habe ich schlechte Erfahrung mit gemacht, diese akt. durchzuführen.

Und ich habe schlechte Erfahrungen mit ungepflegten Kisten gemacht.

iob stop
iob update
iob upgrade self
iob start

Fertig.

Zimbl

@thomas-braun

nein ich meine damit irgendwelche Anleitungen im Netz zu nehmen, wusste jetzt nicht, das es auch einfach mit dem Standard möglich ist, weil ich hatte den schon durchgeführt...aber hatte der das wohl nicht gemacht...

vielen Dank Thomas...

Thomas Braun

@zimbl

'Der' macht das aber nicht ohne Meldungen...
Die 'der' Admin dann liest.

Zimbl

@thomas-braun

ja aber jetzt habe ich das alles aktualisiert...und es ist aber immer noch so, wenn ich einen GPIO Ansteuern möchte, wird der Befehl TRUE or FALSE ....ROT...nicht Grün...wie sonst...

was kann ich nun noch machen ?

Thomas Braun

@zimbl sagte in Test Adapter rpi2 2.x:

was kann ich nun noch machen ?

Abwarten.
Und/oder bei GitHub evtl. zum passenden Issue weitere Erkenntnisse beitragen.

Zimbl

@thomas-braun

ist es eigentlich möglich einen alten RPI2 Adapter zu installieren ?

Thomas Braun

@zimbl

Wozu? Der funktioniert ja dann noch weniger als der aktuelle. Der Adapter musste ja genau deswegen angepasst werden, weil der an mehrere Stellen nicht mehr funktionierte.

Zimbl

@thomas-braun

achso ok, das wusste ich nicht. Weil mit dem alten PI2 hatte ich keine Probleme.

Ich habe nun jetzt aufgerüstet und siehe da, es geht gerade noch weniger.

Aber gut, dann Abwarten...

Homoran

@zimbl sagte in Test Adapter rpi2 2.x:

Weil mit dem alten PI2 hatte ich keine Probleme.

es ist nicht der Pi2 oder 5, sondern das komplett neu gestrickte Betriebssystem, das mit Bookworm kam.

Smallfeuer

Also bei mir geht jetzt auf dem Pi3 nichts mehr.
Alles bereinigt, Adapter gelöscht, Update und upgrade & IOB update -> alles erledigt.
GPIO kann ich auch nicht mehr manuell auslesen .. gpio readall bringt kein ergebnis
Ideen?


rpi2.0
2024-12-29 20:09:32.163	warn	If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start.

rpi2.0
2024-12-29 20:09:32.161	warn	Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter.

rpi2.0
2024-12-29 20:09:32.158	warn	Cannot initialize GPIO: No chip found. GPIO functionality disabled!

rpi2.0
2024-12-29 20:09:29.021	info	starting. Version 2.3.0 in /opt/iobroker/node_modules/iobroker.rpi2, node: v18.17.1, js-controller: 7.0.6

rpi2.0
2024-12-29 20:09:11.869	info	terminating

rpi2.0
2024-12-29 20:09:11.374	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

rpi2.0
2024-12-29 20:09:11.369	info	terminating

rpi2.0
2024-12-29 20:09:11.362	info	Got terminate signal TERMINATE_YOURSELF

rpi2.0
2024-12-29 20:08:40.966	info	GPIO ports are not configured

rpi2.0
2024-12-29 20:08:36.489	info	starting. Version 2.3.0 in /opt/iobroker/node_modules/iobroker.rpi2, node: v18.17.1, js-controller: 7.0.6

rpi2.0
2024-12-29 15:55:32.670	info	terminating

rpi2.0
2024-12-29 15:55:32.174	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

rpi2.0
2024-12-29 15:55:32.171	info	terminating

rpi2.0
2024-12-29 15:55:32.165	info	Got terminate signal TERMINATE_YOURSELF

Smallfeuer

@smallfeuer sagte in Test Adapter rpi2 2.x:

If the library is installed

pi@Pi3IOBrokerGarage:~ $ sudo apt-get update && sudo apt-get upgrade
Holen:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15,0 kB]
OK:2 https://deb.nodesource.com/node_18.x buster InRelease
OK:3 http://archive.raspberrypi.org/debian buster InRelease
Es wurden 15,0 kB in 1 s geholt (11,3 kB/s).
Paketlisten werden gelesen... Fertig
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
pi@Pi3IOBrokerGarage:~ $ sudo apt-get install -y build-essential python
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
build-essential ist schon die neueste Version (12.6).
python ist schon die neueste Version (2.7.16-1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
pi@Pi3IOBrokerGarage:~ $ sudo apt-get install -y libgpiod-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
libgpiod-dev ist schon die neueste Version (1.2-3+rpi1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
pi@Pi3IOBrokerGarage:~ $ sudo apt-get install -y libgpiod-dev
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
libgpiod-dev ist schon die neueste Version (1.2-3+rpi1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

Thomas Braun

@smallfeuer

Buster ist ZU ALT!!!
Seit Jahren tot. Beerdige das Ding.

Smallfeuer

@thomas-braun Also das Gesamte System platt machen und was (?) raufspielen? Sorry, es gibt echt so viele Versionen. Der Pi läuft nur im Slave. Normalerweise sollte es total egal sein, welches System...aber gut. Was muss auf die SD Karte?

Community Forum

NEWS

Test Adapter rpi2 2.x

Support us

589

32.4k

81.4k

1.3m