NEWS
Test Adapter rpi2 2.x
Tester
519
Beiträge
29
Kommentatoren
149.1k
Aufrufe
20
Watching
-
@searcher57 sagte in Test Adapter rpi2 2.x:
Adapter gerade neu installiert, ohne Erfolg!
bist du sicher?
nicht nur die Instanz neu erstellt?
@homoran said in Test Adapter rpi2 2.x:
@searcher57 sagte in Test Adapter rpi2 2.x:
Adapter gerade neu installiert, ohne Erfolg!
bist du sicher?
nicht nur die Instanz neu erstellt?
Ja, bin mir sicher. Den Adapter gelöscht und über beta neu installiert und konfiguriert.
-
@searcher57 said in Test Adapter rpi2 2.x:
@thomas-braun said in Test Adapter rpi2 2.x:
@searcher57
Und was verrätcd /opt/iobroker/ && npm ls opengpiopi@Raspi58GB:~ $ cd /opt/iobroker/ && npm ls opengpio iobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.rpi2@2.2.2 └── opengpio@1.0.17 pi@Raspi58GB:/opt/iobroker $Adapter gerade neu installiert, ohne Erfolg!
Hier nochmal das Protokoll:
pi2.0 2024-12-22 16:20:54.990 warn If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start. rpi2.0 2024-12-22 16:20:54.990 warn Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter. rpi2.0 2024-12-22 16:20:54.989 warn Cannot initialize GPIO: No chip found. GPIO functionality disabled! rpi2.0 2024-12-22 16:20:54.675 info starting. Version 2.2.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.18.1, js-controller: 7.0.3 rpi2.0 2024-12-22 16:20:50.340 info terminating rpi2.0 2024-12-22 16:20:49.841 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason rpi2.0 2024-12-22 16:20:49.840 info terminating rpi2.0 2024-12-22 16:20:49.839 info Got terminate signal TERMINATE_YOURSELF rpi2.0 2024-12-22 16:19:27.683 info GPIO ports are not configured rpi2.0 2024-12-22 16:19:26.628 info starting. Version 2.2.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.18.1, js-controller: 7.0.3 rpi2.0 2024-12-22 16:16:33.859 info terminating rpi2.0 2024-12-22 16:16:33.359 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason rpi2.0 2024-12-22 16:16:33.359 info terminating rpi2.0 2024-12-22 16:16:33.358 info Got terminate signal TERMINATE_YOURSELF rpi2.0 2024-12-22 16:05:28.448 warn If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start. rpi2.0 2024-12-22 16:05:28.448 warn Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter.@searcher57 sagte in Test Adapter rpi2 2.x:
Dann bitte:
please report this issue to the adapter developer with the model of your device and deboug output from an adapter start
-
@searcher57 sagte in Test Adapter rpi2 2.x:
Dann bitte:
please report this issue to the adapter developer with the model of your device and deboug output from an adapter start
@thomas-braun said in Test Adapter rpi2 2.x:
@searcher57 sagte in Test Adapter rpi2 2.x:
Dann bitte:
please report this issue to the adapter developer with the model of your device and deboug output from an adapter start
Danke für Deine Mühe! Habe ich schon gemacht!
Frohe Weihnachten!!
-
@thomas-braun said in Test Adapter rpi2 2.x:
@searcher57 sagte in Test Adapter rpi2 2.x:
Dann bitte:
please report this issue to the adapter developer with the model of your device and deboug output from an adapter start
Danke für Deine Mühe! Habe ich schon gemacht!
Frohe Weihnachten!!
-
@thomas-braun said in Test Adapter rpi2 2.x:
Hier?
https://github.com/iobroker-community-adapters/ioBroker.rpi2/issues
Nein, mache ich!
-
@garfonso Erst man vielen Dank das du das Startverhalten anpassen willst. Wenn du das fertig hast teste ich das gerne für dich. Einfach nur melden
Hinsichtlich des Freischalten verstehe ich jetzt, das weder im alten noch im neunen Adapter die Ausgänge zurückgeschaltet werden.
Kann es sein das im Betriebssystem für die GPIOs dieses Verhalten hinterlegt ist. Wenn ich das richtig gelesen habe wurden die GPIO von der Pi Foundation völlig neu aufgesetzt.
Gerne die 2.3.0 testen, die bald im latest / auf npm erscheinen sollte.
Da habe ich es jetzt so angepasst, dass Einfach nur
Ausganggar nicht beim starten gesetzt wird und die mit Startwert entsprechend einmal beim starten gesetzt werden, egal was jeweils im state (noch) steht.Ultimativer Lovelace Leitfaden: https://forum.iobroker.net/topic/35937/der-ultimative-iobroker-lovelace-leitfaden-dokumentation
Lovelace UI Beispiele: https://forum.iobroker.net/topic/35950/zeigt-her-eure-lovelace-visualisierung
-
@garfonso Erst man vielen Dank das du das Startverhalten anpassen willst. Wenn du das fertig hast teste ich das gerne für dich. Einfach nur melden
Hinsichtlich des Freischalten verstehe ich jetzt, das weder im alten noch im neunen Adapter die Ausgänge zurückgeschaltet werden.
Kann es sein das im Betriebssystem für die GPIOs dieses Verhalten hinterlegt ist. Wenn ich das richtig gelesen habe wurden die GPIO von der Pi Foundation völlig neu aufgesetzt.
@moppedman said in Test Adapter rpi2 2.x:
Kann es sein das im Betriebssystem für die GPIOs dieses Verhalten hinterlegt ist. Wenn ich das richtig gelesen habe wurden die GPIO von der Pi Foundation völlig neu aufgesetzt.
Ja, das ist meine Vermutung, dass es daran liegt. Ich habe extra nochmal in die alte Bibliothek reingeguckt, ob die da irgendwas macht. Aber da passiert beim beenden überall nichts.
Wenn das wichtig ist, könnte man das vielleicht als zusätzlichen Konfigurationsparameter beim Ausgang mit dazu geben.
-
@thomas-braun said in Test Adapter rpi2 2.x:
@searcher57 sagte in Test Adapter rpi2 2.x:
Dann bitte:
please report this issue to the adapter developer with the model of your device and deboug output from an adapter start
Danke für Deine Mühe! Habe ich schon gemacht!
Frohe Weihnachten!!
@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/Frohe Weihnachten trotzdem. :-)
-
@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/Frohe Weihnachten trotzdem. :-)
@garfonso said in Test Adapter rpi2 2.x:
@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/Frohe Weihnachten trotzdem. :-)
Habe ich in GitHub schon gemacht, aber hier nochmal:
rpi2.0 2024-12-24 11:25:59.212 warn If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start. rpi2.0 2024-12-24 11:25:59.212 warn Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter. rpi2.0 2024-12-24 11:25:59.211 warn Cannot initialize GPIO: No chip found. GPIO functionality disabled! rpi2.0 2024-12-24 11:25:58.956 info starting. Version 2.2.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.18.1, js-controller: 7.0.3 rpi2.0 2024-12-24 11:25:51.507 info terminating rpi2.0 2024-12-24 11:25:51.008 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason rpi2.0 2024-12-24 11:25:51.008 info terminating rpi2.0 2024-12-24 11:25:51.006 info Got terminate signal TERMINATE_YOURSELFAuch Dir frohe und besinnliche Weihnachten!
-
@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/Frohe Weihnachten trotzdem. :-)
@garfonso said in Test Adapter rpi2 2.x:
@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/Frohe Weihnachten trotzdem. :-)
So jetzt hab ich es!
rpi2.0 2024-12-26 16:37:21.190 debug wlan disabled -> clean up. rpi2.0 2024-12-26 16:37:21.190 debug -1 rpi2.0 2024-12-26 16:37:21.190 debug CURRENT = wlan false rpi2.0 2024-12-26 16:37:21.190 debug uptime disabled -> clean up. rpi2.0 2024-12-26 16:37:21.189 debug -1 rpi2.0 2024-12-26 16:37:21.189 debug CURRENT = uptime false rpi2.0 2024-12-26 16:37:21.189 debug temperature disabled -> clean up. rpi2.0 2024-12-26 16:37:21.189 debug -1 rpi2.0 2024-12-26 16:37:21.189 debug CURRENT = temperature false rpi2.0 2024-12-26 16:37:21.188 debug swap disabled -> clean up. rpi2.0 2024-12-26 16:37:21.188 debug -1 rpi2.0 2024-12-26 16:37:21.188 debug CURRENT = swap false rpi2.0 2024-12-26 16:37:21.188 debug sdcard disabled -> clean up. rpi2.0 2024-12-26 16:37:21.188 debug -1 rpi2.0 2024-12-26 16:37:21.188 debug CURRENT = sdcard false rpi2.0 2024-12-26 16:37:21.141 debug SETSTATE FOR rpi2.0.network.net_send VALUE = 37315299695 rpi2.0 2024-12-26 16:37:21.141 debug ---> POST: for net_send in [object Object] rpi2.0 2024-12-26 16:37:21.089 debug SETSTATE FOR rpi2.0.network.net_received VALUE = -32564790012 rpi2.0 2024-12-26 16:37:21.089 debug VALUE: 32564790012 POST: $1*-1 rpi2.0 2024-12-26 16:37:21.089 debug ---> POST: $1*-1 for net_received in [object Object] rpi2.0 2024-12-26 16:37:21.089 debug -1 rpi2.0 2024-12-26 16:37:21.088 debug CURRENT = network true rpi2.0 2024-12-26 16:37:21.041 debug SETSTATE FOR rpi2.0.memory.memory_available VALUE = 5125.67 rpi2.0 2024-12-26 16:37:21.041 debug VALUE: 5248688 POST: $1/1024 rpi2.0 2024-12-26 16:37:21.040 debug ---> POST: $1/1024 for memory_available in [object Object] rpi2.0 2024-12-26 16:37:20.993 debug SETSTATE FOR rpi2.0.memory.memory_free VALUE = 1112.42 rpi2.0 2024-12-26 16:37:20.993 debug VALUE: 1139120 POST: $1/1024 rpi2.0 2024-12-26 16:37:20.992 debug ---> POST: $1/1024 for memory_free in [object Object] rpi2.0 2024-12-26 16:37:20.945 debug SETSTATE FOR rpi2.0.memory.memory_total VALUE = 8052.33 rpi2.0 2024-12-26 16:37:20.945 debug VALUE: 8245584 POST: $1/1024 rpi2.0 2024-12-26 16:37:20.945 debug ---> POST: $1/1024 for memory_total in [object Object] rpi2.0 2024-12-26 16:37:20.944 debug -1 rpi2.0 2024-12-26 16:37:20.944 debug CURRENT = memory true rpi2.0 2024-12-26 16:37:20.898 debug SETSTATE FOR rpi2.0.raspberry.mem_gpu VALUE = 4 rpi2.0 2024-12-26 16:37:20.897 debug ---> POST: for mem_gpu in [object Object] rpi2.0 2024-12-26 16:37:20.852 debug SETSTATE FOR rpi2.0.raspberry.mem_arm VALUE = 1020 rpi2.0 2024-12-26 16:37:20.852 debug ---> POST: for mem_arm in [object Object] rpi2.0 2024-12-26 16:37:20.805 debug SETSTATE FOR rpi2.0.raspberry.cpu_voltage VALUE = 0.77 rpi2.0 2024-12-26 16:37:20.804 debug ---> POST: for cpu_voltage in [object Object] rpi2.0 2024-12-26 16:37:20.804 debug -1 rpi2.0 2024-12-26 16:37:20.804 debug CURRENT = raspberry true rpi2.0 2024-12-26 16:37:20.756 debug SETSTATE FOR rpi2.0.cpu.scaling_governor VALUE = ondemand rpi2.0 2024-12-26 16:37:20.756 debug ---> POST: for scaling_governor in [object Object] rpi2.0 2024-12-26 16:37:20.712 debug SETSTATE FOR rpi2.0.cpu.load15 VALUE = 0.21 rpi2.0 2024-12-26 16:37:20.712 debug NAME: load15 VALUE: 0.21 rpi2.0 2024-12-26 16:37:20.712 debug MATCHING: 0.21 rpi2.0 2024-12-26 16:37:20.666 debug SETSTATE FOR rpi2.0.cpu.load5 VALUE = 0.31 rpi2.0 2024-12-26 16:37:20.665 debug NAME: load5 VALUE: 0.31 rpi2.0 2024-12-26 16:37:20.665 debug MATCHING: 0.31 rpi2.0 2024-12-26 16:37:20.620 debug SETSTATE FOR rpi2.0.cpu.load1 VALUE = 0.48 rpi2.0 2024-12-26 16:37:20.620 debug NAME: load1 VALUE: 0.48 rpi2.0 2024-12-26 16:37:20.620 debug MATCHING: 0.48 rpi2.0 2024-12-26 16:37:20.620 debug ---> POST: for load1,load5,load15 in [object Object] rpi2.0 2024-12-26 16:37:20.560 debug SETSTATE FOR rpi2.0.cpu.cpu_frequency VALUE = 1600 rpi2.0 2024-12-26 16:37:20.560 debug VALUE: 1600000 POST: $1/1000 rpi2.0 2024-12-26 16:37:20.560 debug ---> POST: $1/1000 for cpu_frequency in [object Object] rpi2.0 2024-12-26 16:37:20.560 debug -1 rpi2.0 2024-12-26 16:37:20.560 debug CURRENT = cpu true rpi2.0 2024-12-26 16:37:20.560 debug PARSING: wlan rpi2.0 2024-12-26 16:37:20.560 debug PARSING: uptime rpi2.0 2024-12-26 16:37:20.559 debug PARSING: temperature rpi2.0 2024-12-26 16:37:20.559 debug PARSING: swap rpi2.0 2024-12-26 16:37:20.559 debug PARSING: sdcard rpi2.0 2024-12-26 16:37:20.559 debug ---> POST: rpi2.0 2024-12-26 16:37:20.559 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.559 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.558 debug ------------- 37315299695 rpi2.0 2024-12-26 16:37:20.556 debug ---> cat /sys/class/net/e*/statistics/tx_bytes rpi2.0 2024-12-26 16:37:20.556 debug PARSING: net_send rpi2.0 2024-12-26 16:37:20.556 debug ---> POST: $1*-1 rpi2.0 2024-12-26 16:37:20.555 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.555 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.555 debug ------------- 32564790012 rpi2.0 2024-12-26 16:37:20.552 debug ---> cat /sys/class/net/e*/statistics/rx_bytes rpi2.0 2024-12-26 16:37:20.552 debug PARSING: net_received rpi2.0 2024-12-26 16:37:20.552 debug PARSING: network rpi2.0 2024-12-26 16:37:20.552 debug ---> POST: $1/1024 rpi2.0 2024-12-26 16:37:20.552 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.552 debug ---> REGEXP: /MemAvailable:\s+(\d+)/m rpi2.0 2024-12-26 16:37:20.551 debug ------------- MemTotal: 8245584 kB MemFree: 1138400 kB MemAvailable: 5248688 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254944 kB Inactive: 3335408 kB Active(anon): 2575088 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2573280 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7760 kB PageTables: 145904 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19824 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB rpi2.0 2024-12-26 16:37:20.549 debug ---> cat /proc/meminfo rpi2.0 2024-12-26 16:37:20.548 debug PARSING: memory_available rpi2.0 2024-12-26 16:37:20.548 debug ---> POST: $1/1024 rpi2.0 2024-12-26 16:37:20.548 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.548 debug ---> REGEXP: /MemFree:\s+(\d+)/ rpi2.0 2024-12-26 16:37:20.547 debug ------------- MemTotal: 8245584 kB MemFree: 1139120 kB MemAvailable: 5249408 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254352 kB Inactive: 3335408 kB Active(anon): 2574496 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2572688 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7712 kB PageTables: 145904 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19792 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB rpi2.0 2024-12-26 16:37:20.545 debug ---> cat /proc/meminfo rpi2.0 2024-12-26 16:37:20.545 debug PARSING: memory_free rpi2.0 2024-12-26 16:37:20.545 debug ---> POST: $1/1024 rpi2.0 2024-12-26 16:37:20.545 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.544 debug ---> REGEXP: /MemTotal:\s+(\d+)/ rpi2.0 2024-12-26 16:37:20.544 debug ------------- MemTotal: 8245584 kB MemFree: 1139120 kB MemAvailable: 5249408 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254352 kB Inactive: 3335408 kB Active(anon): 2574496 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2572688 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7712 kB PageTables: 145312 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19792 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB rpi2.0 2024-12-26 16:37:20.541 debug ---> cat /proc/meminfo rpi2.0 2024-12-26 16:37:20.541 debug PARSING: memory_total rpi2.0 2024-12-26 16:37:20.540 debug PARSING: memory rpi2.0 2024-12-26 16:37:20.540 debug ---> POST: rpi2.0 2024-12-26 16:37:20.540 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.540 debug ---> REGEXP: /(\d+)/ rpi2.0 2024-12-26 16:37:20.539 debug ------------- gpu=4M rpi2.0 2024-12-26 16:37:20.535 debug ---> vcgencmd get_mem gpu rpi2.0 2024-12-26 16:37:20.535 debug PARSING: mem_gpu rpi2.0 2024-12-26 16:37:20.535 debug ---> POST: rpi2.0 2024-12-26 16:37:20.535 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.535 debug ---> REGEXP: /(\d+)/ rpi2.0 2024-12-26 16:37:20.535 debug ------------- arm=1020M rpi2.0 2024-12-26 16:37:20.531 debug ---> vcgencmd get_mem arm rpi2.0 2024-12-26 16:37:20.531 debug PARSING: mem_arm rpi2.0 2024-12-26 16:37:20.531 debug ---> POST: rpi2.0 2024-12-26 16:37:20.531 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.530 debug ---> REGEXP: /(\d+.\d+)V/ rpi2.0 2024-12-26 16:37:20.530 debug ------------- volt=0.7659V rpi2.0 2024-12-26 16:37:20.526 debug ---> vcgencmd measure_volts core rpi2.0 2024-12-26 16:37:20.526 debug PARSING: cpu_voltage rpi2.0 2024-12-26 16:37:20.526 debug PARSING: raspberry rpi2.0 2024-12-26 16:37:20.526 debug ---> POST: rpi2.0 2024-12-26 16:37:20.526 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.526 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.525 debug ------------- ondemand rpi2.0 2024-12-26 16:37:20.522 debug ---> cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor rpi2.0 2024-12-26 16:37:20.522 debug PARSING: scaling_governor rpi2.0 2024-12-26 16:37:20.522 debug NAME: load15, VALULE: 0.21 rpi2.0 2024-12-26 16:37:20.522 debug MATCHING: 0.21 rpi2.0 2024-12-26 16:37:20.522 debug NAME: load5, VALULE: 0.31 rpi2.0 2024-12-26 16:37:20.522 debug MATCHING: 0.31 rpi2.0 2024-12-26 16:37:20.522 debug NAME: load1, VALULE: 0.48 rpi2.0 2024-12-26 16:37:20.521 debug MATCHING: 0.48 rpi2.0 2024-12-26 16:37:20.521 debug GROUPS: 4 rpi2.0 2024-12-26 16:37:20.521 debug ---> REGEXP: /^(\S+)\s(\S+)\s(\S+)/ rpi2.0 2024-12-26 16:37:20.521 debug ------------- 0.48 0.31 0.21 1/480 1339934 rpi2.0 2024-12-26 16:37:20.518 debug ---> cat /proc/loadavg rpi2.0 2024-12-26 16:37:20.518 debug PARSING: load1,load5,load15 rpi2.0 2024-12-26 16:37:20.518 debug ---> POST: $1/1000 rpi2.0 2024-12-26 16:37:20.518 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.518 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.517 debug ------------- 1600000 rpi2.0 2024-12-26 16:37:20.515 debug ---> test -r /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq || test -r /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq || echo -1000 rpi2.0 2024-12-26 16:37:20.515 debug PARSING: cpu_frequency rpi2.0 2024-12-26 16:37:20.514 debug PARSING: cpu rpi2.0 2024-12-26 16:37:20.514 debug start parsing rpi2.0 2024-12-26 16:36:21.272 debug GPIO chip undefined initialized rpi2.0 2024-12-26 16:36:21.272 debug Got chip: undefined rpi2.0 2024-12-26 16:36:21.271 warn If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start. rpi2.0 2024-12-26 16:36:21.271 warn Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter. rpi2.0 2024-12-26 16:36:21.271 warn Cannot initialize GPIO: No chip found. GPIO functionality disabled! rpi2.0 2024-12-26 16:36:21.271 debug Using GPIO chip 4 for Raspberry Pi 5 or newer. rpi2.0 2024-12-26 16:36:21.271 debug Got 5 from Raspberry Pi 5 Model B Rev 1.0 -
@garfonso said in Test Adapter rpi2 2.x:
@searcher57
debug log steht da. Bitte mal auf debug stellen und das log von nem Adapter start einfügen. Wenn wir Glück haben steht da was drinnen.... ansonsten hab ich spontan keine Idee, was da noch schief gehen soll. :-/Frohe Weihnachten trotzdem. :-)
So jetzt hab ich es!
rpi2.0 2024-12-26 16:37:21.190 debug wlan disabled -> clean up. rpi2.0 2024-12-26 16:37:21.190 debug -1 rpi2.0 2024-12-26 16:37:21.190 debug CURRENT = wlan false rpi2.0 2024-12-26 16:37:21.190 debug uptime disabled -> clean up. rpi2.0 2024-12-26 16:37:21.189 debug -1 rpi2.0 2024-12-26 16:37:21.189 debug CURRENT = uptime false rpi2.0 2024-12-26 16:37:21.189 debug temperature disabled -> clean up. rpi2.0 2024-12-26 16:37:21.189 debug -1 rpi2.0 2024-12-26 16:37:21.189 debug CURRENT = temperature false rpi2.0 2024-12-26 16:37:21.188 debug swap disabled -> clean up. rpi2.0 2024-12-26 16:37:21.188 debug -1 rpi2.0 2024-12-26 16:37:21.188 debug CURRENT = swap false rpi2.0 2024-12-26 16:37:21.188 debug sdcard disabled -> clean up. rpi2.0 2024-12-26 16:37:21.188 debug -1 rpi2.0 2024-12-26 16:37:21.188 debug CURRENT = sdcard false rpi2.0 2024-12-26 16:37:21.141 debug SETSTATE FOR rpi2.0.network.net_send VALUE = 37315299695 rpi2.0 2024-12-26 16:37:21.141 debug ---> POST: for net_send in [object Object] rpi2.0 2024-12-26 16:37:21.089 debug SETSTATE FOR rpi2.0.network.net_received VALUE = -32564790012 rpi2.0 2024-12-26 16:37:21.089 debug VALUE: 32564790012 POST: $1*-1 rpi2.0 2024-12-26 16:37:21.089 debug ---> POST: $1*-1 for net_received in [object Object] rpi2.0 2024-12-26 16:37:21.089 debug -1 rpi2.0 2024-12-26 16:37:21.088 debug CURRENT = network true rpi2.0 2024-12-26 16:37:21.041 debug SETSTATE FOR rpi2.0.memory.memory_available VALUE = 5125.67 rpi2.0 2024-12-26 16:37:21.041 debug VALUE: 5248688 POST: $1/1024 rpi2.0 2024-12-26 16:37:21.040 debug ---> POST: $1/1024 for memory_available in [object Object] rpi2.0 2024-12-26 16:37:20.993 debug SETSTATE FOR rpi2.0.memory.memory_free VALUE = 1112.42 rpi2.0 2024-12-26 16:37:20.993 debug VALUE: 1139120 POST: $1/1024 rpi2.0 2024-12-26 16:37:20.992 debug ---> POST: $1/1024 for memory_free in [object Object] rpi2.0 2024-12-26 16:37:20.945 debug SETSTATE FOR rpi2.0.memory.memory_total VALUE = 8052.33 rpi2.0 2024-12-26 16:37:20.945 debug VALUE: 8245584 POST: $1/1024 rpi2.0 2024-12-26 16:37:20.945 debug ---> POST: $1/1024 for memory_total in [object Object] rpi2.0 2024-12-26 16:37:20.944 debug -1 rpi2.0 2024-12-26 16:37:20.944 debug CURRENT = memory true rpi2.0 2024-12-26 16:37:20.898 debug SETSTATE FOR rpi2.0.raspberry.mem_gpu VALUE = 4 rpi2.0 2024-12-26 16:37:20.897 debug ---> POST: for mem_gpu in [object Object] rpi2.0 2024-12-26 16:37:20.852 debug SETSTATE FOR rpi2.0.raspberry.mem_arm VALUE = 1020 rpi2.0 2024-12-26 16:37:20.852 debug ---> POST: for mem_arm in [object Object] rpi2.0 2024-12-26 16:37:20.805 debug SETSTATE FOR rpi2.0.raspberry.cpu_voltage VALUE = 0.77 rpi2.0 2024-12-26 16:37:20.804 debug ---> POST: for cpu_voltage in [object Object] rpi2.0 2024-12-26 16:37:20.804 debug -1 rpi2.0 2024-12-26 16:37:20.804 debug CURRENT = raspberry true rpi2.0 2024-12-26 16:37:20.756 debug SETSTATE FOR rpi2.0.cpu.scaling_governor VALUE = ondemand rpi2.0 2024-12-26 16:37:20.756 debug ---> POST: for scaling_governor in [object Object] rpi2.0 2024-12-26 16:37:20.712 debug SETSTATE FOR rpi2.0.cpu.load15 VALUE = 0.21 rpi2.0 2024-12-26 16:37:20.712 debug NAME: load15 VALUE: 0.21 rpi2.0 2024-12-26 16:37:20.712 debug MATCHING: 0.21 rpi2.0 2024-12-26 16:37:20.666 debug SETSTATE FOR rpi2.0.cpu.load5 VALUE = 0.31 rpi2.0 2024-12-26 16:37:20.665 debug NAME: load5 VALUE: 0.31 rpi2.0 2024-12-26 16:37:20.665 debug MATCHING: 0.31 rpi2.0 2024-12-26 16:37:20.620 debug SETSTATE FOR rpi2.0.cpu.load1 VALUE = 0.48 rpi2.0 2024-12-26 16:37:20.620 debug NAME: load1 VALUE: 0.48 rpi2.0 2024-12-26 16:37:20.620 debug MATCHING: 0.48 rpi2.0 2024-12-26 16:37:20.620 debug ---> POST: for load1,load5,load15 in [object Object] rpi2.0 2024-12-26 16:37:20.560 debug SETSTATE FOR rpi2.0.cpu.cpu_frequency VALUE = 1600 rpi2.0 2024-12-26 16:37:20.560 debug VALUE: 1600000 POST: $1/1000 rpi2.0 2024-12-26 16:37:20.560 debug ---> POST: $1/1000 for cpu_frequency in [object Object] rpi2.0 2024-12-26 16:37:20.560 debug -1 rpi2.0 2024-12-26 16:37:20.560 debug CURRENT = cpu true rpi2.0 2024-12-26 16:37:20.560 debug PARSING: wlan rpi2.0 2024-12-26 16:37:20.560 debug PARSING: uptime rpi2.0 2024-12-26 16:37:20.559 debug PARSING: temperature rpi2.0 2024-12-26 16:37:20.559 debug PARSING: swap rpi2.0 2024-12-26 16:37:20.559 debug PARSING: sdcard rpi2.0 2024-12-26 16:37:20.559 debug ---> POST: rpi2.0 2024-12-26 16:37:20.559 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.559 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.558 debug ------------- 37315299695 rpi2.0 2024-12-26 16:37:20.556 debug ---> cat /sys/class/net/e*/statistics/tx_bytes rpi2.0 2024-12-26 16:37:20.556 debug PARSING: net_send rpi2.0 2024-12-26 16:37:20.556 debug ---> POST: $1*-1 rpi2.0 2024-12-26 16:37:20.555 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.555 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.555 debug ------------- 32564790012 rpi2.0 2024-12-26 16:37:20.552 debug ---> cat /sys/class/net/e*/statistics/rx_bytes rpi2.0 2024-12-26 16:37:20.552 debug PARSING: net_received rpi2.0 2024-12-26 16:37:20.552 debug PARSING: network rpi2.0 2024-12-26 16:37:20.552 debug ---> POST: $1/1024 rpi2.0 2024-12-26 16:37:20.552 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.552 debug ---> REGEXP: /MemAvailable:\s+(\d+)/m rpi2.0 2024-12-26 16:37:20.551 debug ------------- MemTotal: 8245584 kB MemFree: 1138400 kB MemAvailable: 5248688 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254944 kB Inactive: 3335408 kB Active(anon): 2575088 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2573280 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7760 kB PageTables: 145904 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19824 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB rpi2.0 2024-12-26 16:37:20.549 debug ---> cat /proc/meminfo rpi2.0 2024-12-26 16:37:20.548 debug PARSING: memory_available rpi2.0 2024-12-26 16:37:20.548 debug ---> POST: $1/1024 rpi2.0 2024-12-26 16:37:20.548 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.548 debug ---> REGEXP: /MemFree:\s+(\d+)/ rpi2.0 2024-12-26 16:37:20.547 debug ------------- MemTotal: 8245584 kB MemFree: 1139120 kB MemAvailable: 5249408 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254352 kB Inactive: 3335408 kB Active(anon): 2574496 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2572688 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7712 kB PageTables: 145904 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19792 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB rpi2.0 2024-12-26 16:37:20.545 debug ---> cat /proc/meminfo rpi2.0 2024-12-26 16:37:20.545 debug PARSING: memory_free rpi2.0 2024-12-26 16:37:20.545 debug ---> POST: $1/1024 rpi2.0 2024-12-26 16:37:20.545 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.544 debug ---> REGEXP: /MemTotal:\s+(\d+)/ rpi2.0 2024-12-26 16:37:20.544 debug ------------- MemTotal: 8245584 kB MemFree: 1139120 kB MemAvailable: 5249408 kB Buffers: 216192 kB Cached: 3800864 kB SwapCached: 208 kB Active: 3254352 kB Inactive: 3335408 kB Active(anon): 2574496 kB Inactive(anon): 0 kB Active(file): 679856 kB Inactive(file): 3335408 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204784 kB SwapFree: 191472 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 544 kB Writeback: 0 kB AnonPages: 2572688 kB Mapped: 240144 kB Shmem: 1792 kB KReclaimable: 259760 kB Slab: 306864 kB SReclaimable: 259760 kB SUnreclaim: 47104 kB KernelStack: 7712 kB PageTables: 145312 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4327568 kB Committed_AS: 3961776 kB VmallocTotal: 68180246528 kB VmallocUsed: 19792 kB VmallocChunk: 0 kB Percpu: 1280 kB CmaTotal: 327680 kB CmaFree: 259904 kB rpi2.0 2024-12-26 16:37:20.541 debug ---> cat /proc/meminfo rpi2.0 2024-12-26 16:37:20.541 debug PARSING: memory_total rpi2.0 2024-12-26 16:37:20.540 debug PARSING: memory rpi2.0 2024-12-26 16:37:20.540 debug ---> POST: rpi2.0 2024-12-26 16:37:20.540 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.540 debug ---> REGEXP: /(\d+)/ rpi2.0 2024-12-26 16:37:20.539 debug ------------- gpu=4M rpi2.0 2024-12-26 16:37:20.535 debug ---> vcgencmd get_mem gpu rpi2.0 2024-12-26 16:37:20.535 debug PARSING: mem_gpu rpi2.0 2024-12-26 16:37:20.535 debug ---> POST: rpi2.0 2024-12-26 16:37:20.535 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.535 debug ---> REGEXP: /(\d+)/ rpi2.0 2024-12-26 16:37:20.535 debug ------------- arm=1020M rpi2.0 2024-12-26 16:37:20.531 debug ---> vcgencmd get_mem arm rpi2.0 2024-12-26 16:37:20.531 debug PARSING: mem_arm rpi2.0 2024-12-26 16:37:20.531 debug ---> POST: rpi2.0 2024-12-26 16:37:20.531 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.530 debug ---> REGEXP: /(\d+.\d+)V/ rpi2.0 2024-12-26 16:37:20.530 debug ------------- volt=0.7659V rpi2.0 2024-12-26 16:37:20.526 debug ---> vcgencmd measure_volts core rpi2.0 2024-12-26 16:37:20.526 debug PARSING: cpu_voltage rpi2.0 2024-12-26 16:37:20.526 debug PARSING: raspberry rpi2.0 2024-12-26 16:37:20.526 debug ---> POST: rpi2.0 2024-12-26 16:37:20.526 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.526 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.525 debug ------------- ondemand rpi2.0 2024-12-26 16:37:20.522 debug ---> cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor rpi2.0 2024-12-26 16:37:20.522 debug PARSING: scaling_governor rpi2.0 2024-12-26 16:37:20.522 debug NAME: load15, VALULE: 0.21 rpi2.0 2024-12-26 16:37:20.522 debug MATCHING: 0.21 rpi2.0 2024-12-26 16:37:20.522 debug NAME: load5, VALULE: 0.31 rpi2.0 2024-12-26 16:37:20.522 debug MATCHING: 0.31 rpi2.0 2024-12-26 16:37:20.522 debug NAME: load1, VALULE: 0.48 rpi2.0 2024-12-26 16:37:20.521 debug MATCHING: 0.48 rpi2.0 2024-12-26 16:37:20.521 debug GROUPS: 4 rpi2.0 2024-12-26 16:37:20.521 debug ---> REGEXP: /^(\S+)\s(\S+)\s(\S+)/ rpi2.0 2024-12-26 16:37:20.521 debug ------------- 0.48 0.31 0.21 1/480 1339934 rpi2.0 2024-12-26 16:37:20.518 debug ---> cat /proc/loadavg rpi2.0 2024-12-26 16:37:20.518 debug PARSING: load1,load5,load15 rpi2.0 2024-12-26 16:37:20.518 debug ---> POST: $1/1000 rpi2.0 2024-12-26 16:37:20.518 debug GROUPS: 2 rpi2.0 2024-12-26 16:37:20.518 debug ---> REGEXP: /(.*)/ rpi2.0 2024-12-26 16:37:20.517 debug ------------- 1600000 rpi2.0 2024-12-26 16:37:20.515 debug ---> test -r /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq || test -r /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq || echo -1000 rpi2.0 2024-12-26 16:37:20.515 debug PARSING: cpu_frequency rpi2.0 2024-12-26 16:37:20.514 debug PARSING: cpu rpi2.0 2024-12-26 16:37:20.514 debug start parsing rpi2.0 2024-12-26 16:36:21.272 debug GPIO chip undefined initialized rpi2.0 2024-12-26 16:36:21.272 debug Got chip: undefined rpi2.0 2024-12-26 16:36:21.271 warn If the library is installed and npm list | grep opengpio shows the npm library is also installed, please report this issue to the adapter developer with the model of your device and deboug output from an adapter start. rpi2.0 2024-12-26 16:36:21.271 warn Please make sure that libgpiod-dev (on raspian/debian run sudo apt install libgpiod-dev) is installed in the system and then reinstall the adapter. rpi2.0 2024-12-26 16:36:21.271 warn Cannot initialize GPIO: No chip found. GPIO functionality disabled! rpi2.0 2024-12-26 16:36:21.271 debug Using GPIO chip 4 for Raspberry Pi 5 or newer. rpi2.0 2024-12-26 16:36:21.271 debug Got 5 from Raspberry Pi 5 Model B Rev 1.0Hallo zusammen,
ich würde mich gerne auch an diesem Thema anschließen, ich habe genau das gleiche Problem, ich kann
diese GPIO nicht ansteuern, wenn ich das Probiere, dann wird der Ausgang bzw. in dem Fall True/False rot.Den Adapter habe ich bereits einmal De-Installiert und dann wieder Installiert.
Aber immer noch alles ohne Erfolg.
Anbei mein Diag :
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: raspihome Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 10:47:05 up 7 min, 2 users, load average: 1.06, 0.49, 0.25 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sat 2024-12-28 10:47:05 CET Universal time: Sat 2024-12-28 09:47:05 UTC RTC time: Sat 2024-12-28 09:47:05 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.2G 1.4G 2.0G 5.8M 998M 2.9G Swap: 202M 0B 202M Total: 4.4G 1.4G 2.2G Active iob-Instances: 7 4045 M total memory 1300 M used memory 1327 M active memory 629 M inactive memory 1862 M free memory 69 M buffer memory 883 M swap cache 192 M total swap 0 M used swap 192 M free swap *** top - Table Of Processes *** top - 10:47:05 up 7 min, 2 users, load average: 1.06, 0.49, 0.25 Tasks: 175 total, 1 running, 174 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 4045.0 total, 1862.7 free, 1300.6 used, 952.3 buff/cache MiB Swap: 193.0 total, 193.0 free, 0.0 used. 2744.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 2.0G 0 2.0G 0% /dev tmpfs tmpfs 405M 5.4M 400M 2% /run /dev/mmcblk0p2 ext4 6.9G 6.3G 182M 98% / tmpfs tmpfs 2.0G 0 2.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 405M 16K 405M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Dec 28 10:39:15 2024] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:97:18:01 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=918bb801-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GB cfg80211.ieee80211_regdom=GB [Sat Dec 28 10:39:17 2024] EXT4-fs (mmcblk0p2): mounted filesystem 3b445224-0aeb-4897-9108-009ed4211fb4 ro with ordered data mode. Quota mode: none. [Sat Dec 28 10:39:19 2024] EXT4-fs (mmcblk0p2): re-mounted 3b445224-0aeb-4897-9108-009ed4211fb4 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 950M /var/ 445M /var/cache 431M /var/cache/apt 317M /var/cache/apt/archives 185M /var/lib Archived and active journals take up 120.5M in the file system. /opt/iobroker/backups: 18M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 856M /opt/iobroker/iobroker-data/ 772M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 37M /opt/iobroker/iobroker-data/objects.jsonl 25M /opt/iobroker/iobroker-data/files/wireless-settings.admin/static/js/main.fe851d24.js.map 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 11M /opt/iobroker/iobroker-data/files/wireless-settings.admin/static/js/main.fe851d24.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspihome raspihome (version: 6.0.11, hostname: raspihome , alive, uptime: 31) Core adapters versions js-controller: 6.0.11 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspihome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.backitup.0 : backitup : raspihome - enabled system.adapter.discovery.0 : discovery : raspihome - enabled + system.adapter.javascript.0 : javascript : raspihome - enabled system.adapter.modbus.0 : modbus : raspihome - enabled system.adapter.rpi2.0 : rpi2 : raspihome - enabled + system.adapter.shelly.0 : shelly : raspihome - enabled, port: 1882, bind: 0.0.0.0 system.adapter.terminal.0 : terminal : raspihome - enabled, port: 8088, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.tuya.0 : tuya : raspihome - enabled system.adapter.welcome.0 : welcome : raspihome - enabled, port: 80, bind: 0.0.0.0, run as: admin system.adapter.wireless-settings.0 : wireless-settings : raspihome - disabled + system.adapter.zigbee.0 : zigbee : raspihome - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspihome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.shelly.0 : shelly : raspihome - enabled, port: 1882, bind: 0.0.0.0 system.adapter.terminal.0 : terminal : raspihome - enabled, port: 8088, bind: 0.0.0.0 (SSL), run as: admin system.adapter.welcome.0 : welcome : raspihome - enabled, port: 80, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspihome - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 6.0.11 [Updatable] Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "rpi2" : 2.2.1 , installed 2.2.1 Adapter "shelly" : 8.2.1 , installed 8.2.1 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "welcome" : 1.0.2 , installed 1.0.2 Adapter "wireless-settings": 1.0.2, installed 1.0.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 815 States: 616 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6337 760/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19159 4186/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19164 4186/iobroker.js-co tcp6 0 0 :::80 :::* LISTEN 1001 22054 4711/io.welcome.0 tcp6 0 0 :::22 :::* LISTEN 0 6339 760/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 19205 4206/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 22139 4757/io.terminal.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 22600 4366/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 22601 4366/io.tuya.0 udp 0 0 0.0.0.0:38105 0.0.0.0:* 104 656 604/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 654 604/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 20981 4299/io.shelly.0 udp6 0 0 :::34920 :::* 104 657 604/avahi-daemon: r udp6 0 0 fe80::9fc3:98f7:bf5:546 :::* 0 6430 711/NetworkManager udp6 0 0 fe80::4bfa:4f8a:169:546 :::* 0 875 711/NetworkManager udp6 0 0 :::5353 :::* 104 655 604/avahi-daemon: r -
Hallo zusammen,
ich würde mich gerne auch an diesem Thema anschließen, ich habe genau das gleiche Problem, ich kann
diese GPIO nicht ansteuern, wenn ich das Probiere, dann wird der Ausgang bzw. in dem Fall True/False rot.Den Adapter habe ich bereits einmal De-Installiert und dann wieder Installiert.
Aber immer noch alles ohne Erfolg.
Anbei mein Diag :
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: raspihome Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.62+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 10:47:05 up 7 min, 2 users, load average: 1.06, 0.49, 0.25 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sat 2024-12-28 10:47:05 CET Universal time: Sat 2024-12-28 09:47:05 UTC RTC time: Sat 2024-12-28 09:47:05 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.2G 1.4G 2.0G 5.8M 998M 2.9G Swap: 202M 0B 202M Total: 4.4G 1.4G 2.2G Active iob-Instances: 7 4045 M total memory 1300 M used memory 1327 M active memory 629 M inactive memory 1862 M free memory 69 M buffer memory 883 M swap cache 192 M total swap 0 M used swap 192 M free swap *** top - Table Of Processes *** top - 10:47:05 up 7 min, 2 users, load average: 1.06, 0.49, 0.25 Tasks: 175 total, 1 running, 174 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 4045.0 total, 1862.7 free, 1300.6 used, 952.3 buff/cache MiB Swap: 193.0 total, 193.0 free, 0.0 used. 2744.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 2.0G 0 2.0G 0% /dev tmpfs tmpfs 405M 5.4M 400M 2% /run /dev/mmcblk0p2 ext4 6.9G 6.3G 182M 98% / tmpfs tmpfs 2.0G 0 2.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 405M 16K 405M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Dec 28 10:39:15 2024] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:97:18:01 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=918bb801-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GB cfg80211.ieee80211_regdom=GB [Sat Dec 28 10:39:17 2024] EXT4-fs (mmcblk0p2): mounted filesystem 3b445224-0aeb-4897-9108-009ed4211fb4 ro with ordered data mode. Quota mode: none. [Sat Dec 28 10:39:19 2024] EXT4-fs (mmcblk0p2): re-mounted 3b445224-0aeb-4897-9108-009ed4211fb4 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 950M /var/ 445M /var/cache 431M /var/cache/apt 317M /var/cache/apt/archives 185M /var/lib Archived and active journals take up 120.5M in the file system. /opt/iobroker/backups: 18M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 856M /opt/iobroker/iobroker-data/ 772M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 37M /opt/iobroker/iobroker-data/objects.jsonl 25M /opt/iobroker/iobroker-data/files/wireless-settings.admin/static/js/main.fe851d24.js.map 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 11M /opt/iobroker/iobroker-data/files/wireless-settings.admin/static/js/main.fe851d24.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspihome raspihome (version: 6.0.11, hostname: raspihome , alive, uptime: 31) Core adapters versions js-controller: 6.0.11 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspihome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.backitup.0 : backitup : raspihome - enabled system.adapter.discovery.0 : discovery : raspihome - enabled + system.adapter.javascript.0 : javascript : raspihome - enabled system.adapter.modbus.0 : modbus : raspihome - enabled system.adapter.rpi2.0 : rpi2 : raspihome - enabled + system.adapter.shelly.0 : shelly : raspihome - enabled, port: 1882, bind: 0.0.0.0 system.adapter.terminal.0 : terminal : raspihome - enabled, port: 8088, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.tuya.0 : tuya : raspihome - enabled system.adapter.welcome.0 : welcome : raspihome - enabled, port: 80, bind: 0.0.0.0, run as: admin system.adapter.wireless-settings.0 : wireless-settings : raspihome - disabled + system.adapter.zigbee.0 : zigbee : raspihome - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspihome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.shelly.0 : shelly : raspihome - enabled, port: 1882, bind: 0.0.0.0 system.adapter.terminal.0 : terminal : raspihome - enabled, port: 8088, bind: 0.0.0.0 (SSL), run as: admin system.adapter.welcome.0 : welcome : raspihome - enabled, port: 80, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspihome - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 6.0.11 [Updatable] Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "rpi2" : 2.2.1 , installed 2.2.1 Adapter "shelly" : 8.2.1 , installed 8.2.1 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "welcome" : 1.0.2 , installed 1.0.2 Adapter "wireless-settings": 1.0.2, installed 1.0.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 815 States: 616 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6337 760/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19159 4186/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19164 4186/iobroker.js-co tcp6 0 0 :::80 :::* LISTEN 1001 22054 4711/io.welcome.0 tcp6 0 0 :::22 :::* LISTEN 0 6339 760/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 19205 4206/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 22139 4757/io.terminal.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 22600 4366/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 22601 4366/io.tuya.0 udp 0 0 0.0.0.0:38105 0.0.0.0:* 104 656 604/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 654 604/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 20981 4299/io.shelly.0 udp6 0 0 :::34920 :::* 104 657 604/avahi-daemon: r udp6 0 0 fe80::9fc3:98f7:bf5:546 :::* 0 6430 711/NetworkManager udp6 0 0 fe80::4bfa:4f8a:169:546 :::* 0 875 711/NetworkManager udp6 0 0 :::5353 :::* 104 655 604/avahi-daemon: r@zimbl sagte in Test Adapter rpi2 2.x:
Controller "js-controller": 7.0.6 , installed 6.0.11 [Updatable]
Auf Stand bringen.
-
@zimbl sagte in Test Adapter rpi2 2.x:
Controller "js-controller": 7.0.6 , installed 6.0.11 [Updatable]
Auf Stand bringen.
oh da habe ich schlechte Erfahrung mit gemacht, diese akt. durchzuführen.
Kannst du mir genau sagen, wie ich da am besten vorgehe ?
Hatte da mal eine Anleitung aus dem Netz gehabt und alles ging irgendwie schief was schief gehen konnte :-)
-
oh da habe ich schlechte Erfahrung mit gemacht, diese akt. durchzuführen.
Kannst du mir genau sagen, wie ich da am besten vorgehe ?
Hatte da mal eine Anleitung aus dem Netz gehabt und alles ging irgendwie schief was schief gehen konnte :-)
@zimbl sagte in Test Adapter rpi2 2.x:
oh da habe ich schlechte Erfahrung mit gemacht, diese akt. durchzuführen.
Und ich habe schlechte Erfahrungen mit ungepflegten Kisten gemacht.
iob stop iob update iob upgrade self iob startFertig.
-
@zimbl sagte in Test Adapter rpi2 2.x:
oh da habe ich schlechte Erfahrung mit gemacht, diese akt. durchzuführen.
Und ich habe schlechte Erfahrungen mit ungepflegten Kisten gemacht.
iob stop iob update iob upgrade self iob startFertig.
nein ich meine damit irgendwelche Anleitungen im Netz zu nehmen, wusste jetzt nicht, das es auch einfach mit dem Standard möglich ist, weil ich hatte den schon durchgeführt...aber hatte der das wohl nicht gemacht...
vielen Dank Thomas...
-
nein ich meine damit irgendwelche Anleitungen im Netz zu nehmen, wusste jetzt nicht, das es auch einfach mit dem Standard möglich ist, weil ich hatte den schon durchgeführt...aber hatte der das wohl nicht gemacht...
vielen Dank Thomas...
'Der' macht das aber nicht ohne Meldungen...
Die 'der' Admin dann liest. -
'Der' macht das aber nicht ohne Meldungen...
Die 'der' Admin dann liest. -
ja aber jetzt habe ich das alles aktualisiert...und es ist aber immer noch so, wenn ich einen GPIO Ansteuern möchte, wird der Befehl TRUE or FALSE ....ROT...nicht Grün...wie sonst...
was kann ich nun noch machen ?
@zimbl sagte in Test Adapter rpi2 2.x:
was kann ich nun noch machen ?
Abwarten.
Und/oder bei GitHub evtl. zum passenden Issue weitere Erkenntnisse beitragen. -
ist es eigentlich möglich einen alten RPI2 Adapter zu installieren ?
Wozu? Der funktioniert ja dann noch weniger als der aktuelle. Der Adapter musste ja genau deswegen angepasst werden, weil der an mehrere Stellen nicht mehr funktionierte.
Support us
819
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge