Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Thomas Braun]

@zimbl sagte in nach dem Update, geht nichts mehr.....:

das es ein gutes System wird

Das ist durch die abgehangene Hardware schon ausgeschlossen.

[Zimbl]

@thomas-braun

ok, wenn wir die mal ausklammern. Sagen wir es mal so, das es das beste wird, was man rausholen kann.

Wenn ich z.b. eine neue Hardware kaufe, kann man dann eigentlich das Backup auch auf diese dann aufspielen ?

[Thomas Braun]

@zimbl sagte in nach dem Update, geht nichts mehr.....:

kann man dann eigentlich das Backup auch auf diese dann aufspielen ?

Ein Backup nur des ioBrokers: Ja
Ein 'Backup' (Klon) des gesamten Systems: Nein

[Zimbl]

@thomas-braun

also ich würde dann die Normale Installation inkl. IOBroker durchführen und dann die Backups ausführen..

das würde aber dann funktionieren...

Aber ein Pi5 mit 4 GB sollten dann aber auch erstmal dem Stand der Technik reichen,
oder?

[Thomas Braun]

@zimbl

Ja, dürfte mehr als ausreichend sein für deinen Anwendungsfall.
Der Raspberry4 dürfte auch ausreichen.

Unter 4GB würde ich allerdings nicht gehen.

[Zimbl]

@thomas-braun

ja man weiß ja nie, was da alles noch so kommt...

Bin dann eher jemand der nicht irgendwann wieder aufrüsten will...

IOB Diag läuft noch..

aber muss auch wieder über das Skript laufen, da der normale immer noch nicht läuft...
steht dann dort wieder, das ich den Fix durchführen muss, aber auch , nachdem ich
den Fix durchgeführt habe..

========== Start marking the full check here ===========

```bash
Script v.2024-12-09 Raspbian+zigbee diag+masking

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v7+
      Architecture: arm
OS is similar to: debian

Model           : Raspberry Pi 2 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 18:14:20 up 12 min,  1 user,  load average: 0.37, 0.31, 0.28
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred

*** TIME AND TIMEZONES ***
               Local time: Tue 2024-12-10 18:14:21 CET
           Universal time: Tue 2024-12-10 17:14:21 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
js-controller is not running

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            921M         59M        435M        0.0K        426M        797M
Swap:            99M          0B         99M
Total:          1.0G         59M        535M

Active iob-Instances:   1

          921 M total memory
           60 M used memory
          241 M active memory
          150 M inactive memory
          435 M free memory
           68 M buffer memory
          358 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 18:14:21 up 12 min,  1 user,  load average: 0.37, 0.31, 0.28
Tasks: 120 total,   1 running, 119 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.5 us,  3.8 sy,  0.0 ni, 93.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :    922.0 total,    435.7 free,     60.0 used,    426.4 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.    797.1 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server
* rc-local.service loaded failed failed /etc/rc.local Compatibility

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
1 CRITICAL ERRORS DETECTED!
Check 'sudo dmesg --level=emerg,alert,crit -T' for details

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  6.8G   50G  13% /
devtmpfs       devtmpfs  333M     0  333M   0% /dev
tmpfs          tmpfs     461M     0  461M   0% /dev/shm
tmpfs          tmpfs     185M  940K  184M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs      93M     0   93M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Dec 10 18:02:05 2024] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=a13bd72e-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Dec 10 18:02:09 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue Dec 10 18:02:09 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Dec 10 18:02:14 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,ioc

Files in neuralgic directories:

/var:
2.2G    /var/
1.9G    /var/log/journal/b4db8c2bf1074a1ba2ba6c07d9465d9d
1.9G    /var/log/journal
1.9G    /var/log
123M    /var/cache

Archived and active journals take up 1.8G in the file system.

/opt/iobroker/backups:
94M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
804M    /opt/iobroker/iobroker-data/
720M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map
12M     /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js
9.9M    /opt/iobroker/iobroker-data/objects.jsonl
8.8M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js
8.7M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/838.0aa41cb0.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

*** ZigBee Settings ***

Your zigbee.0 COM-Port is matching 'by-id'. Very good!
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.1
/usr/bin/node           v20.18.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.4

nodejs:
  Installed: 20.18.1-1nodesource1
  Candidate: 20.18.1-1nodesource1
  Version table:
 *** 20.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u5 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspberrypi         raspberrypi (version: 5.0.19, hostname: raspberrypi   , alive, uptime: 45)

Core adapters versions
js-controller:  5.0.19
admin:          7.1.5
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
  system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
  system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              - disabled
  system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
  system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
  system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
  system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
  system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "deconz"       : 1.4.1    , installed 1.4.0  [Updatable]
Adapter    "discovery"    : 5.0.0    , installed 4.4.0  [Updatable]
Adapter    "gruenbeck"    : 0.0.43   , installed 0.0.42 [Updatable]
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.3    , installed 5.0.19 [Updatable]
Adapter    "modbus"       : 6.3.2    , installed 6.1.0  [Updatable]
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 2.2.1    , installed 1.3.2  [Updatable]
Adapter    "shelly"       : 8.2.1    , installed 8.2.1
Adapter    "sonoff"       : 3.1.2    , installed 3.0.3  [Updatable]
Adapter    "tuya"         : 3.16.0   , installed 3.15.0 [Updatable]
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        957
States:         570

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists... Done
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11824      446/sshd: /usr/sbin
tcp6       0      0 :::22                   :::*                    LISTEN      0          11826      446/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12579      344/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          448        571/dhcpcd
udp        0      0 0.0.0.0:46688           0.0.0.0:*                           108        12581      344/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        12580      344/avahi-daemon: r
udp6       0      0 :::58708                :::*                                108        12582      344/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          13728      571/dhcpcd

*** Log File - Last 25 Lines ***

2024-12-10 18:03:09.660  - info: admin.0 (684) terminating
2024-12-10 18:03:09.737  - warn: host.raspberrypi instance system.adapter.rpi2.0 terminated due to SIGTERM
2024-12-10 18:03:09.739  - info: host.raspberrypi instance system.adapter.rpi2.0 terminated with code null ()
2024-12-10 18:03:09.741  - warn: host.raspberrypi instance system.adapter.tuya.0 terminated due to SIGTERM
2024-12-10 18:03:09.743  - info: host.raspberrypi instance system.adapter.tuya.0 terminated with code null ()
2024-12-10 18:03:09.746  - warn: host.raspberrypi instance system.adapter.zigbee.0 terminated due to SIGTERM
2024-12-10 18:03:09.747  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code null ()
2024-12-10 18:03:09.827  - warn: admin.0 (684) get state error: Connection is closed.
2024-12-10 18:03:09.887  - warn: admin.0 (684) Could not perform strict object check of state admin.0.info.updatesJson: DB closed
2024-12-10 18:03:09.890  - warn: admin.0 (684) get state error: Connection is closed.
2024-12-10 18:03:09.895  - warn: admin.0 (684) Cannot check common objects: DB closed
2024-12-10 18:03:10.266  - info: host.raspberrypi instance system.adapter.javascript.0 terminated with code 0 (NO_ERROR)
2024-12-10 18:03:10.270  - info: host.raspberrypi instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR)
2024-12-10 18:03:10.273  - info: host.raspberrypi instance system.adapter.modbus.0 terminated with code 0 (NO_ERROR)
2024-12-10 18:03:10.376  - info: host.raspberrypi instance system.adapter.ping.0 started with pid 817
2024-12-10 18:03:10.408  - info: host.raspberrypi instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2024-12-10 18:03:17.864  - info: ping.0 (817) starting. Version 1.6.2 in /opt/iobroker/node_modules/iobroker.ping, node: v20.18.1, js-controller: 5.0.19
2024-12-10 18:03:17.941  - warn: ping.0 (817) Poll interval is too short. Reset to 5000 ms.
2024-12-10 18:03:21.717  - info: host.raspberrypi force terminating
2024-12-10 18:03:21.721  - info: host.raspberrypi Adapter ping still running
2024-12-10 18:03:24.399  - info: ping.0 (817) terminating with timeout
2024-12-10 18:03:24.407  - info: ping.0 (817) Terminated (NO_ERROR): Without reason
2024-12-10 18:03:26.556  - error: ping.0 (817) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-12-10 18:03:26.832  - warn: ping.0 (817) get state error: Connection is closed.
2024-12-10 18:03:26.840  - info: ping.0 (817) terminating

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

so was sollte ich nun noch durchführen ?

[Thomas Braun]

@zimbl

iob update
iob upgrade all -y
iob stop
iob upgrade self
iob start

[Thomas Braun]

@zimbl sagte in nach dem Update, geht nichts mehr.....:

aber muss auch wieder über das Skript laufen, da der normale immer noch nicht läuft...
steht dann dort wieder, das ich den Fix durchführen muss, aber auch , nachdem ich
den Fix durchgeführt habe..

Ja, da ist ein 'Bug' drin. Deswegen ja die Testversion, da ist es behoben.

[Zimbl]

@thomas-braun

ah ok, danke für die Info Thomas...

die Updates laufen derzeit, danach führe ich wieder den DIAG aus...

[Zimbl]

So ich habe wieder mal ein aktuelles Ergebnis :

========== Start marking the full check here ===========

```bash
Script v.2024-12-09 Raspbian+zigbee diag+masking

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v7+
      Architecture: arm
OS is similar to: debian

Model           : Raspberry Pi 2 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 18:52:41 up 50 min,  1 user,  load average: 1.45, 1.87, 1.47
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred

*** TIME AND TIMEZONES ***
               Local time: Tue 2024-12-10 18:52:41 CET
           Universal time: Tue 2024-12-10 17:52:41 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            921M        517M         75M        0.0K        328M        344M
Swap:            99M         92M        7.0M
Total:          1.0G        610M         82M

Active iob-Instances:   10

          921 M total memory
          517 M used memory
          300 M active memory
          466 M inactive memory
           74 M free memory
           22 M buffer memory
          307 M swap cache
           99 M total swap
           92 M used swap
            7 M free swap

*** top - Table Of Processes  ***
top - 18:52:43 up 50 min,  1 user,  load average: 1.41, 1.86, 1.47
Tasks: 133 total,   1 running, 132 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.6 us,  3.9 sy,  0.0 ni, 93.4 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :    922.0 total,     74.4 free,    518.1 used,    329.4 buff/cache
MiB Swap:    100.0 total,      7.3 free,     92.7 used.    343.8 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* rc-local.service loaded failed failed /etc/rc.local Compatibility

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
1 CRITICAL ERRORS DETECTED!
Check 'sudo dmesg --level=emerg,alert,crit -T' for details

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  7.0G   49G  13% /
devtmpfs       devtmpfs  333M     0  333M   0% /dev
tmpfs          tmpfs     461M     0  461M   0% /dev/shm
tmpfs          tmpfs     185M  944K  184M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs      93M     0   93M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Dec 10 18:02:05 2024] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=a13bd72e-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Dec 10 18:02:09 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue Dec 10 18:02:09 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Dec 10 18:02:14 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,ioc

Files in neuralgic directories:

/var:
2.2G    /var/
1.9G    /var/log/journal/b4db8c2bf1074a1ba2ba6c07d9465d9d
1.9G    /var/log/journal
1.9G    /var/log
123M    /var/cache

Archived and active journals take up 1.8G in the file system.

/opt/iobroker/backups:
97M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
818M    /opt/iobroker/iobroker-data/
722M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
21M     /opt/iobroker/iobroker-data/objects.jsonl
12M     /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.7M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/838.0aa41cb0.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

*** ZigBee Settings ***

Your zigbee.0 COM-Port is matching 'by-id'. Very good!
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.1
/usr/bin/node           v20.18.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.4

nodejs:
  Installed: 20.18.1-1nodesource1
  Candidate: 20.18.1-1nodesource1
  Version table:
 *** 20.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u5 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspberrypi         raspberrypi (version: 7.0.3, hostname: raspberrypi   , alive, uptime: 495)

Core adapters versions
js-controller:  7.0.3
admin:          7.1.5
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
  system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "deconz"       : 1.4.1    , installed 1.4.1
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "gruenbeck"    : 0.0.43   , installed 0.0.43
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.3    , installed 7.0.3
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 2.2.1    , installed 2.2.1
Adapter    "shelly"       : 8.2.1    , installed 8.2.1
Adapter    "sonoff"       : 3.1.2    , installed 3.1.2
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        974
States:         665

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists... Done
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       33968      3854/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       33963      3854/iobroker.js-co
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11824      446/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       34103      3872/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          11826      446/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12579      344/avahi-daemon: r
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       34921      3919/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       34922      3919/io.tuya.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       33344      3950/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          448        571/dhcpcd
udp        0      0 0.0.0.0:46688           0.0.0.0:*                           108        12581      344/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        12580      344/avahi-daemon: r
udp6       0      0 :::58708                :::*                                108        12582      344/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          13728      571/dhcpcd

*** Log File - Last 25 Lines ***

2024-12-10 18:51:53.743  - info: host.raspberrypi stopInstance system.adapter.rpi2.0 (force=false, process=true)
2024-12-10 18:51:53.811  - info: rpi2.0 (5014) Got terminate signal TERMINATE_YOURSELF
2024-12-10 18:51:53.828  - info: host.raspberrypi stopInstance system.adapter.rpi2.0 send kill signal
2024-12-10 18:51:53.823  - info: rpi2.0 (5014) terminating
2024-12-10 18:51:53.830  - info: rpi2.0 (5014) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-12-10 18:51:54.454  - info: rpi2.0 (5014) terminating
2024-12-10 18:51:54.529  - error: rpi2.0 (5014) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2024-12-10 18:51:54.531  - error: rpi2.0 (5014) unhandled promise rejection: DB closed
2024-12-10 18:51:54.540  - error: rpi2.0 (5014) Error: DB closed
    at Redis.sendCommand (/opt/iobroker/node_modules/ioredis/built/redis/index.js:636:24)
    at Redis.get (/opt/iobroker/node_modules/ioredis/built/commander.js:122:25)
    at ObjectsInRedisClient._getObject (file:///opt/iobroker/node_modules/@iobroker/db-objects-redis/build/esm/lib/objects/objectsInRedisClient.js:2333:37)
    at Immediate.<anonymous> (file:///opt/iobroker/node_modules/@iobroker/db-objects-redis/build/esm/lib/objects/objectsInRedisClient.js:2374:29)
    at process.processImmediate (node:internal/timers:485:21)
2024-12-10 18:51:54.543  - error: rpi2.0 (5014) DB closed
2024-12-10 18:51:54.668  - info: host.raspberrypi instance system.adapter.rpi2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-12-10 18:51:59.938  - info: host.raspberrypi instance system.adapter.rpi2.0 in version "2.2.1" started with pid 5085
2024-12-10 18:52:07.710  - info: rpi2.0 (5085) starting. Version 2.2.1 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.18.1, js-controller: 7.0.3
2024-12-10 18:53:10.144  - info: admin.0 (3872) ==> Connected system.user.admin from ::ffff:192.168.178.82
2024-12-10 18:53:11.238  - info: zigbee.0 (3932) List of port: [{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"ceccc8e6cbc9eb119edf8b4f1d69213e","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0","vendorId":"10c4","productId":"ea60"}]
2024-12-10 18:53:16.482  - info: admin.0 (3872) <== Disconnect system.user.admin from ::ffff:192.168.178.82
2024-12-10 18:53:24.487  - info: admin.0 (3872) ==> Connected system.user.admin from ::ffff:192.168.178.82
2024-12-10 18:53:46.635  - info: admin.0 (3872) <== Disconnect system.user.admin from ::ffff:192.168.178.82 javascript
2024-12-10 18:53:57.051  - info: admin.0 (3872) ==> Connected system.user.admin from ::ffff:192.168.178.82
2024-12-10 18:54:58.672  - warn: backitup.0 (3886) [iobroker/clean] No older backup files are deleted, because this backup was started manually

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

[Thomas Braun]

@zimbl sagte in nach dem Update, geht nichts mehr.....:

*** DMESG CRITICAL ERRORS ***
1 CRITICAL ERRORS DETECTED!
Check 'sudo dmesg --level=emerg,alert,crit -T' for details

Schau dir den an.

[Thomas Braun]

@zimbl

Grundsätzlich sollte das Ding jetzt wieder schnurren.

[Zimbl]

@thomas-braun

Hallo Thomas,

ich habe mir nun einen Pi5 geholt und mit dem PI Imager auch das
Image drauf gemacht, soweit auch alles wie immer Konfiguriert.

Was nur komisch ist, meine ETH0 Schnittstelle funktioniert nicht,
ich stecke das Kabel rein, aber nichts.

Keine Verbindung.

ich meine früher war die immer Standard aktiv.

ist das nun nicht mehr ?

[Thomas Braun]

@zimbl

Ja, eine Ethernet-Schnittstelle ist i.d.R. aktiv.
schau dir

ip a

und

ifconfig

an.

[Homoran]

@zimbl sagte in nach dem Update, geht nichts mehr.....:

ich stecke das Kabel rein, aber nichts.

auch keine Aktionen an den LED der Netzwerkbuchse?

[Zimbl]

@homoran

Ne überhaupt nichts.

Das komische ist irgendwie auch, das in der dhcpcd.conf auch nichts
drin steht.

Gut aber wenn die nicht aktiv ist, würden ja die LEDs auch
nicht funktionieren..

Mit dem PI Imager habe ich 64-Bit Light installiert...

[Homoran]

@zimbl kann ja noch ein Hardwaredefekt sein.

Allerdings hatte ich so einen Effekt mal bei Armbian.
Mit einer Version funktionierte das Netzwerk nicht.
Aber ich glaube nicht dass das hier auch so ist.

@zimbl sagte in nach dem Update, geht nichts mehr.....:

Das komische ist irgendwie auch, das in der dhcpcd.conf auch nichts
drin steht.

ich kann dir gar nicht sagen, welche Konfiguration im aktuellen OS verwendet wird.

Gibts da nicht auch was in raspi-config?

[Zimbl]

@homoran

ja ich hatte das bisher auch noch nicht und wenn ich die Befehle ausführe die Thomas geschrieben hat, da kann man auch nicht sehen, das die Schnittstelle ein Problem hat.

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
    link/ether 2c:cf:67:97:18:01 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 2c:cf:67:97:18:02 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.114/24 brd 192.168.1.255 scope global dynamic noprefixroute wlan0
       valid_lft 863543sec preferred_lft 863543sec
    inet6 2001:9e:d5e8:9100:134b:4abc:41f3:b3b0/64 scope global dynamic noprefixroute
       valid_lft 6747sec preferred_lft 3147sec
    inet6 fe80::4bfa:4f8a:169e:c02e/64 scope link noprefixroute
       valid_lft forever preferred_lft forever

Für mich sieht das so aus, das die Schnittstelle einen Defekt hat?

oder?

[mcm1957]

@zimbl

Ich kann nur sagen dass ich vor kurzem nen Pi mit dem Imager aufgesetzt habe und die LAN Schnittstelle war sofort und ohne irgendwelche Aktionen einsatzbereit und funktionierte. Hat auch ganz normal im Netz den DHCP Server gefunden und sich eine Addresse geholt.

Ob man ev. im Imager die Netzwerkschnittstelle aktiv disablen kann oder ob sie disabled wird wenn man WLAN aktiviert hab ich mir nicht angesehen. Der Default ist / war jedenfalls LAN Buchse aktiiv.

Und zur Sicherheit check auch noch mal der Kabel und verbind den Raspi ggF mit einem Kabel direkt zu Router um allfällge Schäden an einer Hausverkabelung auszuschließen.

[Homoran]

@zimbl sagte in nach dem Update, geht nichts mehr.....:

das die Schnittstelle einen Defekt hat?

oder das Kabel/der Switch

@zimbl sagte in nach dem Update, geht nichts mehr.....:

2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP>