NEWS
Test Adapter rpi2 2.x
-
@laser Wenn du sichergehen willst, dass du den richtigen Adapter hast, dann installier den über die Shell mit
iob upgrade rpi2@2.0.0
bzw. wenn er gerade deinstalliert ist
iob add rpi2@2.0.0
-
@janga Noch mal den Adapter über die Shell installiert (vorher libgiod und Adapter gelöscht, rebot).
rpi2.0 2024-09-05 11:45:59.188 error GPIO is not initialized! rpi2.0 2024-09-05 11:45:56.857 error GPIO is not initialized! rpi2.0 2024-09-05 11:45:53.430 error Cannot initialize/setMode GPIO: TypeError: Cannot read properties of undefined (reading 'output') rpi2.0 2024-09-05 11:45:52.715 info starting. Version 2.0.0 in /opt/iobroker/node_modules/iobroker.rpi2, node: v18.20.4, js-controller: 5.0.19 rpi2.0 2024-09-05 11:45:49.713 info terminating rpi2.0 2024-09-05 11:45:49.268 info Terminated (NO_ERROR): Without reason rpi2.0 2024-09-05 11:45:49.266 info terminating rpi2.0 2024-09-05 11:45:49.213 error Cannot initialize/setMode GPIO: TypeError: Cannot read properties of undefined (reading 'output') rpi2.0 2024-09-05 11:45:48.419 info starting. Version 2.0.0 in /opt/iobroker/node_modules/iobroker.rpi2, node: v18.20.4, js-controller: 5.0.19 rpi2.0 2024-09-05 11:45:44.350 info terminating rpi2.0 2024-09-05 11:45:43.853 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason rpi2.0 2024-09-05 11:45:43.851 info terminating rpi2.0 2024-09-05 11:45:43.845 info Got terminate signal TERMINATE_YOURSELF rpi2.0 2024-09-05 11:45:02.810 warn Port 23 is configured as input and not writable rpi2.0 2024-09-05 11:45:01.121 warn Port 23 is configured as input and not writable rpi2.0 2024-09-05 11:44:59.273 warn Port 23 is configured as input and not writable rpi2.0 2024-09-05 11:44:58.352 error Cannot initialize/setMode GPIO: TypeError: Cannot read properties of undefined (reading 'watch')
Zuerst den GPIO23 falsch eingestellt, dann korrigiert. Versucht, den Ausgang zu setzen und den Eingang abzufragen. Klappt Beides nicht.
-
-
@janga said in Test Adapter rpi2 2.x:
@searcher57 ist libgiod-dev auf dem System installiert? War es schon installiert, als der Adapter installiert wurde? Wenn nicht, Adapter deinstallieren, libgiod-dev installieren und Adapter wieder installieren!
Danke, ja das habe ich alles schon gemacht.
-
@searcher57 Was für einen Raspberry Pi benutzt du?
-
@janga said in Test Adapter rpi2 2.x:
@searcher57 Was für einen Raspberry Pi benutzt du?
Ich habe einen Raspi 5 im Einsatz. Aber mein Raspi 4 verhält sich genauso. Leider funktioniert nach wenigen Monaten der Freude über eine erfolgreiche Nachbesserung von @garfonso die APP wieder nicht!
-
@searcher57 Wird schon werden! Bevor ich jetzt Klimmzüge mit Scripten auf Debian Ebene mache, warte ich ab.
-
@laser Es gibt auch noch die Möglichkeit eines Javascripts in IOBroker. Habe die Tage irgendwo einen Eintrag gesehen von jemanden, der GPIO ohne den Adapter benutzt hat. Finde das nur leider im Moment nicht...
Bei mir selbst geht der Kram im Moment auch nicht. In meinem Fall liegt es aber an der Art und Weise wie der Adapter bestimmt, welcher Raspberry Pi verwendet wird, und wie er diese Information dann so umsetzt, dass die verwendete GPIO-Bibliothek weiß, wie sie den Chip ansteuern muss. Ich habe einen Raspberry Pi Zero 2 W in einem Schalkasten im Garten und steuere damit die Beleuchtung. Leider kann man Zero 2 W nicht mit dem gleichen Regex in eine Nummer umwandeln wie Raspberry Pi 1,2,3,4 oder 5. Ich habe da auch schon eine Lösung für und habe einen Pull Request auf Github eingereicht. Ich bin nur leider zu unfähig, um meinen eigenen Fix bei mir einzuspielen ohne dass er im Repository ist. Bzw. ich hab einfach zu wenig Zeit, um mich in die IOBroker Adapterentwicklung tief genug einzuarbeiten. Stattdessen muss ich jetzt genau wie du warten, dass @Garfonso meinen oder einen anderen Fix einbaut. Schon bitter, wie hilflos man da ist. -
@janga Man kann Linux Befehle vom IO Broker ausführen. Aber das tue ich nur, wenn nichts Anderes geht. Das wird schnell unübersichtlich, wenn man das System neu aufsetzen muß, grübelt man erst mal, was man Alles umgestrickt hat. Adapter sind sind die bessere Lösung. Wenn Sie funktionieren.
-
@janga said in Test Adapter rpi2 2.x:
@laser Es gibt auch noch die Möglichkeit eines Javascripts in IOBroker. Habe die Tage irgendwo einen Eintrag gesehen von jemanden, der GPIO ohne den Adapter benutzt hat. Finde das nur leider im Moment nicht...
Bei mir selbst geht der Kram im Moment auch nicht. In meinem Fall liegt es aber an der Art und Weise wie der Adapter bestimmt, welcher Raspberry Pi verwendet wird, und wie er diese Information dann so umsetzt, dass die verwendete GPIO-Bibliothek weiß, wie sie den Chip ansteuern muss. Ich habe einen Raspberry Pi Zero 2 W in einem Schalkasten im Garten und steuere damit die Beleuchtung. Leider kann man Zero 2 W nicht mit dem gleichen Regex in eine Nummer umwandeln wie Raspberry Pi 1,2,3,4 oder 5. Ich habe da auch schon eine Lösung für und habe einen Pull Request auf Github eingereicht. Ich bin nur leider zu unfähig, um meinen eigenen Fix bei mir einzuspielen ohne dass er im Repository ist. Bzw. ich hab einfach zu wenig Zeit, um mich in die IOBroker Adapterentwicklung tief genug einzuarbeiten. Stattdessen muss ich jetzt genau wie du warten, dass @Garfonso meinen oder einen anderen Fix einbaut. Schon bitter, wie hilflos man da ist.Ähmm
Ich habe da auch schon eine Lösung für und habe einen Pull Request auf Github eingereicht. Ich bin nur leider zu unfähig, um meinen eigenen Fix bei mir einzuspielen ohne dass er im Repository ist.
Blöde Frage - aber wie hast du den PR gestestet ohne die Codeänderung zu installieren ???
Installieren kannst du den von dir geänderten Adpapter jederzeit via "install from Github" von deinem geforkten Repository in dem du die Änderungen vorgenommen hast. (https://github.com/jangatzke/ioBroker.rpi2 ?)
-
@mcm1957 sagte in Test Adapter rpi2 2.x:
Installieren kannst du den von dir geänderten Adpapter jederzeit via "install from Github" von deinem geforkten Repository in dem du die Änderungen vorgenommen hast. (https://github.com/jangatzke/ioBroker.rpi2 ?)
reicht es nicht die Instanz zu stoppen, die geänderte Datei im Adapterverzeichnis zu tauschen, dann ein upload zu machen und die Instanz wieder zu starten?
-
@homoran
Natürlich - nur sollte man vermeiden direkt im Codetree rumzuwerken. Via GH Installtion hat man in diesem Fall die Sicherheit dass das was man vie PR einreicht auch selbst bei einem läuft -
@mcm1957 Getestet habe ich das gar nicht. Nur weil ich in der Lage bin, drei Zeilen code zu verstehen und anzupassen, heißt das noch lange nicht, dass ich nicht zu dumm bin, diese Änderung in meine Installation einzuspielen.
Mit Install from Github hatte ich es schonmal versucht, habe aber nicht gerafft, wie ich da z.B. einen bestimmten Branch auswähle oder so. Das wirkte jedenfalls nicht selbsterklärend für mich und ich hab da außer Fehlermeldungen nichts zustande gebracht oder gar installiert. Ich habe fest vor mich da einzuarbeiten, werde das aber erst im Herbst angehen können, denke ich. Ich hänge auch noch als letzter aktiver "Entwickler" irgendwie beim MySensors Adapter mit drin und will den eigentlich auch nicht sterben lassen, Motivation ist also reichlich vorhanden, Knowhow aber fast keins. -
@janga said in Test Adapter rpi2 2.x:
@mcm1957 Getestet habe ich das gar nicht. Nur weil ich in der Lage bin, drei Zeilen code zu verstehen und anzupassen, heißt das noch lange nicht, dass ich nicht zu dumm bin, diese Änderung in meine Installation einzuspielen.
Sorry, wenn das so rübergekommen ist. Ich würde nie jemand als (zu) dumm bezeichnen. Das wär völlig unangemessen. Das einzige was ich mit meinem Post hinterfragen wollte ist ob du die Änderung getestest hast. Sorry - hätt ich höflicher formulieren können.
Mit Install from Github hatte ich es schonmal versucht, habe aber nicht gerafft, wie ich da z.B. einen bestimmten Branch auswähle oder so.
cli: iob install jangatzke/ioBroker.rpi2#new-gpio-lib
ui:
.. sollte gehen. UI Url wie auf der Github Seite wenn du den Branch selektierts.
Kanns aber konkret nicht testen, da mein Testsystem Windows basierend ist und da haperts mit den GPIOs ein wenig
DANKE jedenfalls dass du dein Wissen einbringst.
-
Und wenn du Entwicklerhilfe suchst schau in den Telegramm Channels vorbei. Invites auf www.iobroker.dev.
-
@mcm1957 Da war nichts negativ rübergekommen, das "dumm" war reine Selbstkritik von mir. Da habe ich mich wohl eher nicht gut ausgedrückt.
Der Tipp mit der Raute dazwischen hilft schonmal. Ich werden mir das am Wochenende nochmal anschauen, danke für die Starthilfe! -
@mcm1957 said in Test Adapter rpi2 2.x:
iob install jangatzke/ioBroker.rpi2#new-gpio-lib
Das ging bei mir nicht:
jan@gartenhaus:/opt/iobroker $ iob install jangatzke/ioBroker.rpi2#new-gpio-lib Invalid adapter name for install iobroker install <adapter> Installs a specified adapter Options: --help Show help [boolean]
Was ging:
jan@gartenhaus:/opt/iobroker $ iob url https://github.com/jangatzke/ioBroker.rpi2/tree/new-gpio-lib install jangatzke/ioBroker.rpi2#new-gpio-lib NPM version: 10.8.2 Installing jangatzke/ioBroker.rpi2#new-gpio-lib... (System call) changed 1 package in 17s 72 packages are looking for funding run `npm fund` for details upload [12] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [11] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [10] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [9] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [8] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [7] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [6] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [5] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [4] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [3] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [2] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/index_m.html index_m.html text/html upload [1] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/rpi2.png rpi2.png image/png upload [0] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/words.js words.js application/javascript
Bei mir hat es danach funktioniert mit dem dreckigen Patch für den Pi 2 Zero W, den ich geschrieben habe. Licht im Garten lässt sich wieder schalten. Ich habe noch einen Tippfehler korrigieren müssen (warm statt warn), von daher hat sich der Test gelohnt. Danke nochmal für die Hilfe.
-
@Laser @searcher57 Ich habe mich jetzt nochmal mit eurem Problem beschäftigt und ich bin mir sicher, dass bei euch beiden die Instanz nicht auf Debug eingestellt war, als ihr die Logs gezogen habt. Bei mir sieht ein Start so aus, wenn ich das Logging auf Debug stelle:
2024-09-09 20:52:28.789 - info: host.powercount instance system.adapter.rpi2.0 in version "2.0.0" (non-npm: jangatzke/ioBroker.rpi2#new-gpio-lib) started with pid 58038 2024-09-09 20:52:34.191 - debug: rpi2.0 (58038) Redis Objects: Use Redis connection: 192.168.69.227:9001 2024-09-09 20:52:34.284 - debug: rpi2.0 (58038) Objects client ready ... initialize now 2024-09-09 20:52:34.293 - debug: rpi2.0 (58038) Objects create System PubSub Client 2024-09-09 20:52:34.296 - debug: rpi2.0 (58038) Objects create User PubSub Client 2024-09-09 20:52:34.415 - debug: rpi2.0 (58038) Objects client initialize lua scripts 2024-09-09 20:52:34.459 - debug: rpi2.0 (58038) Objects connected to redis: 192.168.69.227:9001 2024-09-09 20:52:34.646 - debug: rpi2.0 (58038) Redis States: Use Redis connection: 192.168.69.227:9000 2024-09-09 20:52:34.736 - debug: rpi2.0 (58038) States create System PubSub Client 2024-09-09 20:52:34.739 - debug: rpi2.0 (58038) States create User PubSub Client 2024-09-09 20:52:34.860 - debug: rpi2.0 (58038) States connected to redis: 192.168.69.227:9000 2024-09-09 20:52:35.672 - info: rpi2.0 (58038) starting. Version 2.0.0 (non-npm: jangatzke/ioBroker.rpi2#new-gpio-lib) in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.16.0, js-controller: 6.0.11 2024-09-09 20:52:35.956 - debug: rpi2.0 (58038) received all objects 2024-09-09 20:52:35.968 - debug: rpi2.0 (58038) cpu is enabled 2024-09-09 20:52:35.972 - debug: rpi2.0 (58038) start parsing 2024-09-09 20:52:35.975 - debug: rpi2.0 (58038) PARSING: cpu 2024-09-09 20:52:35.977 - debug: rpi2.0 (58038) PARSING: cpu_frequency 2024-09-09 20:52:35.978 - debug: rpi2.0 (58038) ---> test -r /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq || test -r /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq || echo -1000 2024-09-09 20:52:35.991 - debug: rpi2.0 (58038) ------------- 1000000 2024-09-09 20:52:35.993 - debug: rpi2.0 (58038) ---> REGEXP: /(.*)/ 2024-09-09 20:52:35.994 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:35.996 - debug: rpi2.0 (58038) ---> POST: $1/1000 2024-09-09 20:52:35.997 - debug: rpi2.0 (58038) PARSING: load1,load5,load15 2024-09-09 20:52:35.998 - debug: rpi2.0 (58038) ---> cat /proc/loadavg 2024-09-09 20:52:36.008 - debug: rpi2.0 (58038) ------------- 0.43 0.18 0.05 1/179 58056 2024-09-09 20:52:36.010 - debug: rpi2.0 (58038) ---> REGEXP: /^(\S+)\s(\S+)\s(\S+)/ 2024-09-09 20:52:36.011 - debug: rpi2.0 (58038) GROUPS: 4 2024-09-09 20:52:36.011 - debug: rpi2.0 (58038) MATCHING: 0.43 2024-09-09 20:52:36.012 - debug: rpi2.0 (58038) NAME: load1, VALULE: 0.43 2024-09-09 20:52:36.013 - debug: rpi2.0 (58038) MATCHING: 0.18 2024-09-09 20:52:36.013 - debug: rpi2.0 (58038) NAME: load5, VALULE: 0.18 2024-09-09 20:52:36.014 - debug: rpi2.0 (58038) MATCHING: 0.05 2024-09-09 20:52:36.016 - debug: rpi2.0 (58038) NAME: load15, VALULE: 0.05 2024-09-09 20:52:36.017 - debug: rpi2.0 (58038) PARSING: scaling_governor 2024-09-09 20:52:36.017 - debug: rpi2.0 (58038) ---> cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor 2024-09-09 20:52:36.030 - debug: rpi2.0 (58038) ------------- ondemand 2024-09-09 20:52:36.031 - debug: rpi2.0 (58038) ---> REGEXP: /(.*)/ 2024-09-09 20:52:36.032 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:36.033 - debug: rpi2.0 (58038) ---> POST: 2024-09-09 20:52:36.034 - debug: rpi2.0 (58038) PARSING: raspberry 2024-09-09 20:52:36.034 - debug: rpi2.0 (58038) PARSING: cpu_voltage 2024-09-09 20:52:36.035 - debug: rpi2.0 (58038) ---> vcgencmd measure_volts core 2024-09-09 20:52:36.049 - debug: rpi2.0 (58038) ------------- volt=1.2563V 2024-09-09 20:52:36.050 - debug: rpi2.0 (58038) ---> REGEXP: /(\d+.\d+)V/ 2024-09-09 20:52:36.052 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:36.053 - debug: rpi2.0 (58038) ---> POST: 2024-09-09 20:52:36.053 - debug: rpi2.0 (58038) PARSING: mem_arm 2024-09-09 20:52:36.054 - debug: rpi2.0 (58038) ---> vcgencmd get_mem arm 2024-09-09 20:52:36.064 - debug: rpi2.0 (58038) ------------- arm=448M 2024-09-09 20:52:36.066 - debug: rpi2.0 (58038) ---> REGEXP: /(\d+)/ 2024-09-09 20:52:36.066 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:36.067 - debug: rpi2.0 (58038) ---> POST: 2024-09-09 20:52:36.068 - debug: rpi2.0 (58038) PARSING: mem_gpu 2024-09-09 20:52:36.068 - debug: rpi2.0 (58038) ---> vcgencmd get_mem gpu 2024-09-09 20:52:36.078 - debug: rpi2.0 (58038) ------------- gpu=64M 2024-09-09 20:52:36.080 - debug: rpi2.0 (58038) ---> REGEXP: /(\d+)/ 2024-09-09 20:52:36.081 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:36.081 - debug: rpi2.0 (58038) ---> POST: 2024-09-09 20:52:36.082 - debug: rpi2.0 (58038) PARSING: memory 2024-09-09 20:52:36.083 - debug: rpi2.0 (58038) PARSING: network 2024-09-09 20:52:36.087 - debug: rpi2.0 (58038) PARSING: sdcard 2024-09-09 20:52:36.087 - debug: rpi2.0 (58038) PARSING: swap 2024-09-09 20:52:36.088 - debug: rpi2.0 (58038) PARSING: swap_total 2024-09-09 20:52:36.089 - debug: rpi2.0 (58038) ---> cat /proc/meminfo 2024-09-09 20:52:36.099 - debug: rpi2.0 (58038) ------------- MemTotal: 427072 kB MemFree: 135832 kB MemAvailable: 183856 kB Buffers: 5216 kB Cached: 78648 kB SwapCached: 14512 kB Active: 164920 kB Inactive: 59784 kB Active(anon): 102728 kB Inactive(anon): 38276 kB Active(file): 62192 kB Inactive(file): 21508 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 123228 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 48 kB Writeback: 0 kB AnonPages: 139332 kB Mapped: 61836 kB Shmem: 164 kB KReclaimable: 19016 kB Slab: 41388 kB SReclaimable: 19016 kB SUnreclaim: 22372 kB KernelStack: 2916 kB PageTables: 2768 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 418332 kB Committed_AS: 500112 kB VmallocTotal: 257687552 kB VmallocUsed: 10436 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 262144 kB CmaFree: 100824 kB 2024-09-09 20:52:36.101 - debug: rpi2.0 (58038) ---> REGEXP: /SwapTotal:\s+(\d+)/m 2024-09-09 20:52:36.102 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:36.103 - debug: rpi2.0 (58038) ---> POST: $1/1024 2024-09-09 20:52:36.103 - debug: rpi2.0 (58038) PARSING: swap_used 2024-09-09 20:52:36.104 - debug: rpi2.0 (58038) ---> cat /proc/meminfo 2024-09-09 20:52:36.115 - debug: rpi2.0 (58038) ------------- MemTotal: 427072 kB MemFree: 135708 kB MemAvailable: 183744 kB Buffers: 5216 kB Cached: 78660 kB SwapCached: 14512 kB Active: 164932 kB Inactive: 59784 kB Active(anon): 102728 kB Inactive(anon): 38276 kB Active(file): 62204 kB Inactive(file): 21508 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 123228 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 48 kB Writeback: 0 kB AnonPages: 139356 kB Mapped: 61836 kB Shmem: 164 kB KReclaimable: 19016 kB Slab: 41388 kB SReclaimable: 19016 kB SUnreclaim: 22372 kB KernelStack: 2912 kB PageTables: 2768 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 418332 kB Committed_AS: 500112 kB VmallocTotal: 257687552 kB VmallocUsed: 10436 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 262144 kB CmaFree: 100824 kB 2024-09-09 20:52:36.116 - debug: rpi2.0 (58038) ---> REGEXP: /SwapFree:\s+(\d+)/m 2024-09-09 20:52:36.117 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:36.118 - debug: rpi2.0 (58038) ---> POST: (rpi.swap_total - $1)/1024 2024-09-09 20:52:36.118 - debug: rpi2.0 (58038) PARSING: temperature 2024-09-09 20:52:36.119 - debug: rpi2.0 (58038) PARSING: soc_temp 2024-09-09 20:52:36.120 - debug: rpi2.0 (58038) ---> cat /sys/devices/virtual/thermal/thermal_zone0/temp 2024-09-09 20:52:36.131 - debug: rpi2.0 (58038) ------------- 49388 2024-09-09 20:52:36.132 - debug: rpi2.0 (58038) ---> REGEXP: /(.*)/ 2024-09-09 20:52:36.133 - debug: rpi2.0 (58038) GROUPS: 2 2024-09-09 20:52:36.134 - debug: rpi2.0 (58038) ---> POST: $1/1000 2024-09-09 20:52:36.134 - debug: rpi2.0 (58038) PARSING: uptime 2024-09-09 20:52:36.135 - debug: rpi2.0 (58038) PARSING: wlan 2024-09-09 20:52:36.136 - debug: rpi2.0 (58038) CURRENT = cpu true 2024-09-09 20:52:36.136 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:36.195 - debug: rpi2.0 (58038) ---> POST: $1/1000 for cpu_frequency in [object Object] 2024-09-09 20:52:36.196 - debug: rpi2.0 (58038) VALUE: 1000000 POST: $1/1000 2024-09-09 20:52:36.197 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.cpu.cpu_frequency VALUE = 1000 2024-09-09 20:52:36.297 - debug: rpi2.0 (58038) ---> POST: for load1,load5,load15 in [object Object] 2024-09-09 20:52:36.299 - debug: rpi2.0 (58038) MATCHING: 0.43 2024-09-09 20:52:36.299 - debug: rpi2.0 (58038) NAME: load1 VALUE: 0.43 2024-09-09 20:52:36.300 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.cpu.load1 VALUE = 0.43 2024-09-09 20:52:36.391 - debug: rpi2.0 (58038) MATCHING: 0.18 2024-09-09 20:52:36.392 - debug: rpi2.0 (58038) NAME: load5 VALUE: 0.18 2024-09-09 20:52:36.392 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.cpu.load5 VALUE = 0.18 2024-09-09 20:52:36.502 - debug: rpi2.0 (58038) MATCHING: 0.05 2024-09-09 20:52:36.504 - debug: rpi2.0 (58038) NAME: load15 VALUE: 0.05 2024-09-09 20:52:36.505 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.cpu.load15 VALUE = 0.05 2024-09-09 20:52:36.588 - debug: rpi2.0 (58038) ---> POST: for scaling_governor in [object Object] 2024-09-09 20:52:36.590 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.cpu.scaling_governor VALUE = ondemand 2024-09-09 20:52:36.665 - debug: rpi2.0 (58038) CURRENT = raspberry true 2024-09-09 20:52:36.667 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:36.689 - debug: rpi2.0 (58038) ---> POST: for cpu_voltage in [object Object] 2024-09-09 20:52:36.690 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.raspberry.cpu_voltage VALUE = 1.26 2024-09-09 20:52:36.785 - debug: rpi2.0 (58038) ---> POST: for mem_arm in [object Object] 2024-09-09 20:52:36.787 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.raspberry.mem_arm VALUE = 448 2024-09-09 20:52:37.062 - debug: rpi2.0 (58038) ---> POST: for mem_gpu in [object Object] 2024-09-09 20:52:37.063 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.raspberry.mem_gpu VALUE = 64 2024-09-09 20:52:37.156 - debug: rpi2.0 (58038) CURRENT = memory false 2024-09-09 20:52:37.157 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:37.158 - debug: rpi2.0 (58038) memory disabled -> clean up. 2024-09-09 20:52:37.158 - debug: rpi2.0 (58038) CURRENT = network false 2024-09-09 20:52:37.159 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:37.159 - debug: rpi2.0 (58038) network disabled -> clean up. 2024-09-09 20:52:37.160 - debug: rpi2.0 (58038) CURRENT = sdcard false 2024-09-09 20:52:37.161 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:37.161 - debug: rpi2.0 (58038) sdcard disabled -> clean up. 2024-09-09 20:52:37.162 - debug: rpi2.0 (58038) CURRENT = swap true 2024-09-09 20:52:37.162 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:37.207 - debug: rpi2.0 (58038) ---> POST: $1/1024 for swap_total in [object Object] 2024-09-09 20:52:37.209 - debug: rpi2.0 (58038) VALUE: 204796 POST: $1/1024 2024-09-09 20:52:37.210 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.swap.swap_total VALUE = 200 2024-09-09 20:52:37.278 - debug: rpi2.0 (58038) ---> POST: (rpi.swap_total - $1)/1024 for swap_used in [object Object] 2024-09-09 20:52:37.279 - debug: rpi2.0 (58038) VALUE: 123228 POST: (rpi.swap_total - $1)/1024 2024-09-09 20:52:37.281 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.swap.swap_used VALUE = 79.66 2024-09-09 20:52:37.356 - debug: rpi2.0 (58038) CURRENT = temperature true 2024-09-09 20:52:37.357 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:37.391 - debug: rpi2.0 (58038) ---> POST: $1/1000 for soc_temp in [object Object] 2024-09-09 20:52:37.392 - debug: rpi2.0 (58038) VALUE: 49388 POST: $1/1000 2024-09-09 20:52:37.393 - debug: rpi2.0 (58038) SETSTATE FOR rpi2.0.temperature.soc_temp VALUE = 49.39 2024-09-09 20:52:37.729 - debug: rpi2.0 (58038) CURRENT = uptime false 2024-09-09 20:52:37.731 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:37.732 - debug: rpi2.0 (58038) uptime disabled -> clean up. 2024-09-09 20:52:37.733 - debug: rpi2.0 (58038) CURRENT = wlan false 2024-09-09 20:52:37.734 - debug: rpi2.0 (58038) -1 2024-09-09 20:52:37.735 - debug: rpi2.0 (58038) wlan disabled -> clean up. 2024-09-09 20:52:39.558 - debug: rpi2.0 (58038) Creating gpio.17.isInput 2024-09-09 20:52:40.718 - debug: rpi2.0 (58038) class Default extends classes_1.Device { } 2024-09-09 20:52:40.734 - debug: rpi2.0 (58038) CPU Info: Raspberry Pi Zero 2 W Rev 1.0 2024-09-09 20:52:40.736 - debug: rpi2.0 (58038) STDERR: 2024-09-09 20:52:40.737 - debug: rpi2.0 (58038) Got 1 from Raspberry Pi Zero 2 W Rev 1.0. 2024-09-09 20:52:40.738 - debug: rpi2.0 (58038) Inputs are pull down. 2024-09-09 20:52:40.738 - debug: rpi2.0 (58038) Buttons are pull down. 2024-09-09 20:52:40.739 - debug: rpi2.0 (58038) Got chip: class Default extends classes_1.Device { } 2024-09-09 20:52:40.739 - debug: rpi2.0 (58038) GPIO chip undefined initialized 2024-09-09 20:52:40.740 - debug: rpi2.0 (58038) Port 17 direction: in 2024-09-09 20:52:40.756 - debug: rpi2.0 (58038) Setting state for port 17 to false 2024-09-09 20:52:40.828 - debug: rpi2.0 (58038) Adding event listener for port 17
Bei euch sehe ich keinen einzigen Eintrag der Stufe "debug". Ihr müsst unter Instanzen bei aktiviertem Expertenmodus das Loglevel der Instanz auf Debug stellen!
Der Adapter startet dann neu und beim Start sollten entsprechende Einträge angezeigt werden. Eventuell sehen wir dann etwas, das uns dabei weiterhilft, das Problem einzugrenzen.
-
@janga erwischt. Nach dem Neuinstallieren habe ich das tatsächlich vergessen!
rpi2.0 2024-09-10 09:51:44.645 debug SETSTATE FOR rpi2.0.wlan.wifi_send VALUE = 0 rpi2.0 2024-09-10 09:51:44.645 debug ---> POST: for wifi_send in [object Object] rpi2.0 2024-09-10 09:51:44.594 debug SETSTATE FOR rpi2.0.wlan.wifi_received VALUE = 0 rpi2.0 2024-09-10 09:51:44.594 debug VALUE: 0 POST: $1*-1 rpi2.0 2024-09-10 09:51:44.593 debug ---> POST: $1*-1 for wifi_received in [object Object] rpi2.0 2024-09-10 09:51:44.593 debug -1 rpi2.0 2024-09-10 09:51:44.593 debug CURRENT = wlan true rpi2.0 2024-09-10 09:51:44.542 debug SETSTATE FOR rpi2.0.uptime.uptime VALUE = 425931.67 rpi2.0 2024-09-10 09:51:44.542 debug ---> POST: for uptime in [object Object] rpi2.0 2024-09-10 09:51:44.541 debug -1 rpi2.0 2024-09-10 09:51:44.541 debug CURRENT = uptime true rpi2.0 2024-09-10 09:51:44.492 debug SETSTATE FOR rpi2.0.temperature.soc_temp VALUE = 44.3 rpi2.0 2024-09-10 09:51:44.492 debug VALUE: 44303 POST: $1/1000 rpi2.0 2024-09-10 09:51:44.491 debug ---> POST: $1/1000 for soc_temp in [object Object] rpi2.0 2024-09-10 09:51:44.490 debug -1 rpi2.0 2024-09-10 09:51:44.489 debug CURRENT = temperature true rpi2.0 2024-09-10 09:51:44.438 debug SETSTATE FOR rpi2.0.swap.swap_used VALUE = 193.64 rpi2.0 2024-09-10 09:51:44.437 debug VALUE: 6512 POST: (rpi.swap_total - $1)/1024 rpi2.0 2024-09-10 09:51:44.437 debug ---> POST: (rpi.swap_total - $1)/1024 for swap_used in [object Object] rpi2.0 2024-09-10 09:51:44.386 debug SETSTATE FOR rpi2.0.swap.swap_total VALUE = 200 rpi2.0 2024-09-10 09:51:44.386 debug VALUE: 204796 POST: $1/1024 rpi2.0 2024-09-10 09:51:44.385 debug ---> POST: $1/1024 for swap_total in [object Object] rpi2.0 2024-09-10 09:51:44.385 debug -1 rpi2.0 2024-09-10 09:51:44.385 debug CURRENT = swap true rpi2.0 2024-09-10 09:51:44.334 debug SETSTATE FOR rpi2.0.sdcard.sdcard_boot_used VALUE = 63.14 rpi2.0 2024-09-10 09:51:44.333 debug VALUE: 64654 POST: $1/1024 rpi2.0 2024-09-10 09:51:44.333 debug ---> POST: $1/1024 for sdcard_boot_used in [object Object] rpi2.0 2024-09-10 09:51:44.282 debug SETSTATE FOR rpi2.0.sdcard.sdcard_root_used VALUE = 5695.19 rpi2.0 2024-09-10 09:51:44.281 debug VALUE: 5831872 POST: $1/1024 rpi2.0 2024-09-10 09:51:44.281 debug ---> POST: $1/1024 for sdcard_root_used in [object Object] rpi2.0 2024-09-10 09:51:44.230 debug SETSTATE FOR rpi2.0.sdcard.sdcard_boot_total VALUE = 509.99 rpi2.0 2024-09-10 09:51:44.230 debug VALUE: 522230 POST: $1/1024 rpi2.0 2024-09-10 09:51:44.229 debug ---> POST: $1/1024 for sdcard_boot_total in [object Object] rpi2.0 2024-09-10 09:51:44.178 debug SETSTATE FOR rpi2.0.sdcard.sdcard_root_total VALUE = 29433.42 rpi2.0 2024-09-10 09:51:44.178 debug VALUE: 30139824 POST: $1/1024 rpi2.0 2024-09-10 09:51:44.177 debug ---> POST: $1/1024 for sdcard_root_total in [object Object] rpi2.0 2024-09-10 09:51:44.177 debug -1 rpi2.0 2024-09-10 09:51:44.177 debug CURRENT = sdcard true rpi2.0 2024-09-10 09:51:44.129 debug SETSTATE FOR rpi2.0.network.net_send VALUE = 162852985 rpi2.0 2024-09-10 09:51:44.129 debug ---> POST: for net_send in [object Object] rpi2.0 2024-09-10 09:51:44.078 debug SETSTATE FOR rpi2.0.network.net_received VALUE = -148363631 rpi2.0 2024-09-10 09:51:44.078 debug VALUE: 148363631 POST: $1*-1 rpi2.0 2024-09-10 09:51:44.077 debug ---> POST: $1*-1 for net_received in [object Object] rpi2.0 2024-09-10 09:51:44.077 debug -1 rpi2.0 2024-09-10 09:51:44.077 debug CURRENT = network true rpi2.0 2024-09-10 09:51:44.026 debug SETSTATE FOR rpi2.0.memory.memory_available VALUE = 1060.11 rpi2.0 2024-09-10 09:51:44.025 debug VALUE: 1085556 POST: $1/1024 rpi2.0 2024-09-10 09:51:44.025 debug ---> POST: $1/1024 for memory_available in [object Object] rpi2.0 2024-09-10 09:51:43.976 debug SETSTATE FOR rpi2.0.memory.memory_free VALUE = 518.15 rpi2.0 2024-09-10 09:51:43.975 debug VALUE: 530588 POST: $1/1024 rpi2.0 2024-09-10 09:51:43.973 debug ---> POST: $1/1024 for memory_free in [object Object] rpi2.0 2024-09-10 09:51:43.919 debug SETSTATE FOR rpi2.0.memory.memory_total VALUE = 1846.94 rpi2.0 2024-09-10 09:51:43.919 debug VALUE: 1891264 POST: $1/1024 rpi2.0 2024-09-10 09:51:43.919 debug ---> POST: $1/1024 for memory_total in [object Object] rpi2.0 2024-09-10 09:51:43.919 debug -1 rpi2.0 2024-09-10 09:51:43.918 debug CURRENT = memory true rpi2.0 2024-09-10 09:51:43.918 debug raspberry disabled -> clean up. rpi2.0 2024-09-10 09:51:43.918 debug -1 rpi2.0 2024-09-10 09:51:43.917 debug CURRENT = raspberry false rpi2.0 2024-09-10 09:51:43.869 debug SETSTATE FOR rpi2.0.cpu.scaling_governor VALUE = ondemand rpi2.0 2024-09-10 09:51:43.869 debug ---> POST: for scaling_governor in [object Object] rpi2.0 2024-09-10 09:51:43.817 debug SETSTATE FOR rpi2.0.cpu.load15 VALUE = 0.09 rpi2.0 2024-09-10 09:51:43.817 debug NAME: load15 VALUE: 0.09 rpi2.0 2024-09-10 09:51:43.817 debug MATCHING: 0.09 rpi2.0 2024-09-10 09:51:43.766 debug SETSTATE FOR rpi2.0.cpu.load5 VALUE = 0.23 rpi2.0 2024-09-10 09:51:43.766 debug NAME: load5 VALUE: 0.23 rpi2.0 2024-09-10 09:51:43.766 debug MATCHING: 0.23 rpi2.0 2024-09-10 09:51:43.715 debug SETSTATE FOR rpi2.0.cpu.load1 VALUE = 0.45 rpi2.0 2024-09-10 09:51:43.714 debug NAME: load1 VALUE: 0.45 rpi2.0 2024-09-10 09:51:43.714 debug MATCHING: 0.45 rpi2.0 2024-09-10 09:51:43.713 debug ---> POST: for load1,load5,load15 in [object Object] rpi2.0 2024-09-10 09:51:43.592 debug SETSTATE FOR rpi2.0.cpu.cpu_frequency VALUE = 1000 rpi2.0 2024-09-10 09:51:43.592 debug VALUE: 1000000 POST: $1/1000 rpi2.0 2024-09-10 09:51:43.591 debug ---> POST: $1/1000 for cpu_frequency in [object Object] rpi2.0 2024-09-10 09:51:43.591 debug -1 rpi2.0 2024-09-10 09:51:43.591 debug CURRENT = cpu true rpi2.0 2024-09-10 09:51:43.591 debug ---> POST: rpi2.0 2024-09-10 09:51:43.591 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.590 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:51:43.590 debug ------------- 0 rpi2.0 2024-09-10 09:51:43.584 debug ---> cat /sys/class/net/wl*/statistics/tx_bytes rpi2.0 2024-09-10 09:51:43.583 debug PARSING: wifi_send rpi2.0 2024-09-10 09:51:43.583 debug ---> POST: $1*-1 rpi2.0 2024-09-10 09:51:43.583 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.583 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:51:43.582 debug ------------- 0 rpi2.0 2024-09-10 09:51:43.576 debug ---> cat /sys/class/net/wl*/statistics/rx_bytes rpi2.0 2024-09-10 09:51:43.576 debug PARSING: wifi_received rpi2.0 2024-09-10 09:51:43.576 debug PARSING: wlan rpi2.0 2024-09-10 09:51:43.576 debug ---> POST: rpi2.0 2024-09-10 09:51:43.575 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.575 debug ---> REGEXP: /(^\S+)/ rpi2.0 2024-09-10 09:51:43.574 debug ------------- 425931.67 1682350.61 rpi2.0 2024-09-10 09:51:43.569 debug ---> cat /proc/uptime rpi2.0 2024-09-10 09:51:43.568 debug PARSING: uptime rpi2.0 2024-09-10 09:51:43.568 debug PARSING: uptime rpi2.0 2024-09-10 09:51:43.568 debug ---> POST: $1/1000 rpi2.0 2024-09-10 09:51:43.568 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.567 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:51:43.567 debug ------------- 44303 rpi2.0 2024-09-10 09:51:43.561 debug ---> cat /sys/devices/virtual/thermal/thermal_zone0/temp rpi2.0 2024-09-10 09:51:43.561 debug PARSING: soc_temp rpi2.0 2024-09-10 09:51:43.561 debug PARSING: temperature rpi2.0 2024-09-10 09:51:43.560 debug ---> POST: (rpi.swap_total - $1)/1024 rpi2.0 2024-09-10 09:51:43.560 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.560 debug ---> REGEXP: /SwapFree:\s+(\d+)/m rpi2.0 2024-09-10 09:51:43.559 debug ------------- MemTotal: 1891264 kB MemFree: 530476 kB MemAvailable: 1085244 kB Buffers: 81316 kB Cached: 503460 kB SwapCached: 1752 kB Active: 518280 kB Inactive: 732276 kB Active(anon): 463680 kB Inactive(anon): 202124 kB Active(file): 54600 kB Inactive(file): 530152 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6512 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 664072 kB Mapped: 86884 kB Shmem: 24 kB KReclaimable: 38220 kB Slab: 62988 kB SReclaimable: 38220 kB SUnreclaim: 24768 kB KernelStack: 4392 kB PageTables: 6528 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553468 kB VmallocTotal: 257687552 kB VmallocUsed: 12016 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB rpi2.0 2024-09-10 09:51:43.553 debug ---> cat /proc/meminfo rpi2.0 2024-09-10 09:51:43.552 debug PARSING: swap_used rpi2.0 2024-09-10 09:51:43.552 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.551 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.551 debug ---> REGEXP: /SwapTotal:\s+(\d+)/m rpi2.0 2024-09-10 09:51:43.550 debug ------------- MemTotal: 1891264 kB MemFree: 530728 kB MemAvailable: 1085496 kB Buffers: 81316 kB Cached: 503460 kB SwapCached: 1752 kB Active: 518180 kB Inactive: 732276 kB Active(anon): 463580 kB Inactive(anon): 202124 kB Active(file): 54600 kB Inactive(file): 530152 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6512 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 663972 kB Mapped: 86884 kB Shmem: 24 kB KReclaimable: 38220 kB Slab: 62988 kB SReclaimable: 38220 kB SUnreclaim: 24768 kB KernelStack: 4392 kB PageTables: 6428 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553468 kB VmallocTotal: 257687552 kB VmallocUsed: 12016 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB rpi2.0 2024-09-10 09:51:43.542 debug ---> cat /proc/meminfo rpi2.0 2024-09-10 09:51:43.541 debug PARSING: swap_total rpi2.0 2024-09-10 09:51:43.541 debug PARSING: swap rpi2.0 2024-09-10 09:51:43.541 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.540 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.540 debug ---> REGEXP: /\S+\s+\d+\s+(\d+).*\/boot/m rpi2.0 2024-09-10 09:51:43.538 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / rpi2.0 2024-09-10 09:51:43.528 debug ---> df /boot/* rpi2.0 2024-09-10 09:51:43.528 debug PARSING: sdcard_boot_used rpi2.0 2024-09-10 09:51:43.528 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.527 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.527 debug ---> REGEXP: /\S+\s+\d+\s+(\d+).*\/$/m rpi2.0 2024-09-10 09:51:43.526 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831872 22757424 21% / rpi2.0 2024-09-10 09:51:43.517 debug ---> df / rpi2.0 2024-09-10 09:51:43.516 debug PARSING: sdcard_root_used rpi2.0 2024-09-10 09:51:43.516 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.516 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.515 debug ---> REGEXP: /\S+\s+(\d+).*\/boot/m rpi2.0 2024-09-10 09:51:43.513 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / /dev/mmcblk0p2 30139824 5831872 22757424 21% / rpi2.0 2024-09-10 09:51:43.504 debug ---> df /boot/* rpi2.0 2024-09-10 09:51:43.503 debug PARSING: sdcard_boot_total rpi2.0 2024-09-10 09:51:43.503 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.502 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.501 debug ---> REGEXP: /\S+\s+(\d+).*\/$/m rpi2.0 2024-09-10 09:51:43.500 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831872 22757424 21% / rpi2.0 2024-09-10 09:51:43.490 debug ---> df / rpi2.0 2024-09-10 09:51:43.489 debug PARSING: sdcard_root_total rpi2.0 2024-09-10 09:51:43.488 debug PARSING: sdcard rpi2.0 2024-09-10 09:51:43.484 debug ---> POST: rpi2.0 2024-09-10 09:51:43.481 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.480 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:51:43.480 debug ------------- 162852985 rpi2.0 2024-09-10 09:51:43.470 debug ---> cat /sys/class/net/e*/statistics/tx_bytes rpi2.0 2024-09-10 09:51:43.470 debug PARSING: net_send rpi2.0 2024-09-10 09:51:43.469 debug ---> POST: $1*-1 rpi2.0 2024-09-10 09:51:43.469 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.469 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:51:43.468 debug ------------- 148363631 rpi2.0 2024-09-10 09:51:43.460 debug ---> cat /sys/class/net/e*/statistics/rx_bytes rpi2.0 2024-09-10 09:51:43.460 debug PARSING: net_received rpi2.0 2024-09-10 09:51:43.459 debug PARSING: network rpi2.0 2024-09-10 09:51:43.459 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.459 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.458 debug ---> REGEXP: /MemAvailable:\s+(\d+)/m rpi2.0 2024-09-10 09:51:43.457 debug ------------- MemTotal: 1891264 kB MemFree: 530788 kB MemAvailable: 1085556 kB Buffers: 81316 kB Cached: 503460 kB SwapCached: 1752 kB Active: 518080 kB Inactive: 732276 kB Active(anon): 463480 kB Inactive(anon): 202124 kB Active(file): 54600 kB Inactive(file): 530152 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6512 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 663772 kB Mapped: 86884 kB Shmem: 24 kB KReclaimable: 38220 kB Slab: 62988 kB SReclaimable: 38220 kB SUnreclaim: 24768 kB KernelStack: 4364 kB PageTables: 6428 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553468 kB VmallocTotal: 257687552 kB VmallocUsed: 12000 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB rpi2.0 2024-09-10 09:51:43.448 debug ---> cat /proc/meminfo rpi2.0 2024-09-10 09:51:43.448 debug PARSING: memory_available rpi2.0 2024-09-10 09:51:43.447 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.447 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.447 debug ---> REGEXP: /MemFree:\s+(\d+)/ rpi2.0 2024-09-10 09:51:43.445 debug ------------- MemTotal: 1891264 kB MemFree: 530588 kB MemAvailable: 1085356 kB Buffers: 81316 kB Cached: 503460 kB SwapCached: 1752 kB Active: 517780 kB Inactive: 732276 kB Active(anon): 463180 kB Inactive(anon): 202124 kB Active(file): 54600 kB Inactive(file): 530152 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6512 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 663672 kB Mapped: 86884 kB Shmem: 24 kB KReclaimable: 38220 kB Slab: 62988 kB SReclaimable: 38220 kB SUnreclaim: 24768 kB KernelStack: 4364 kB PageTables: 6428 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553468 kB VmallocTotal: 257687552 kB VmallocUsed: 12000 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB rpi2.0 2024-09-10 09:51:43.437 debug ---> cat /proc/meminfo rpi2.0 2024-09-10 09:51:43.436 debug PARSING: memory_free rpi2.0 2024-09-10 09:51:43.436 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:51:43.436 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.435 debug ---> REGEXP: /MemTotal:\s+(\d+)/ rpi2.0 2024-09-10 09:51:43.434 debug ------------- MemTotal: 1891264 kB MemFree: 530840 kB MemAvailable: 1085608 kB Buffers: 81316 kB Cached: 503460 kB SwapCached: 1752 kB Active: 517680 kB Inactive: 732276 kB Active(anon): 463080 kB Inactive(anon): 202124 kB Active(file): 54600 kB Inactive(file): 530152 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6512 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 663572 kB Mapped: 86884 kB Shmem: 24 kB KReclaimable: 38220 kB Slab: 62988 kB SReclaimable: 38220 kB SUnreclaim: 24768 kB KernelStack: 4364 kB PageTables: 6428 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553468 kB VmallocTotal: 257687552 kB VmallocUsed: 11984 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB rpi2.0 2024-09-10 09:51:43.425 debug ---> cat /proc/meminfo rpi2.0 2024-09-10 09:51:43.425 debug PARSING: memory_total rpi2.0 2024-09-10 09:51:43.424 debug PARSING: memory rpi2.0 2024-09-10 09:51:43.424 debug PARSING: raspberry rpi2.0 2024-09-10 09:51:43.424 debug ---> POST: rpi2.0 2024-09-10 09:51:43.423 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.423 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:51:43.422 debug ------------- ondemand rpi2.0 2024-09-10 09:51:43.413 debug ---> cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor rpi2.0 2024-09-10 09:51:43.413 debug PARSING: scaling_governor rpi2.0 2024-09-10 09:51:43.412 debug NAME: load15, VALULE: 0.09 rpi2.0 2024-09-10 09:51:43.412 debug MATCHING: 0.09 rpi2.0 2024-09-10 09:51:43.412 debug NAME: load5, VALULE: 0.23 rpi2.0 2024-09-10 09:51:43.411 debug MATCHING: 0.23 rpi2.0 2024-09-10 09:51:43.411 debug NAME: load1, VALULE: 0.45 rpi2.0 2024-09-10 09:51:43.411 debug MATCHING: 0.45 rpi2.0 2024-09-10 09:51:43.410 debug GROUPS: 4 rpi2.0 2024-09-10 09:51:43.410 debug ---> REGEXP: /^(\S+)\s(\S+)\s(\S+)/ rpi2.0 2024-09-10 09:51:43.409 debug ------------- 0.45 0.23 0.09 1/270 523196 rpi2.0 2024-09-10 09:51:43.400 debug ---> cat /proc/loadavg rpi2.0 2024-09-10 09:51:43.400 debug PARSING: load1,load5,load15 rpi2.0 2024-09-10 09:51:43.399 debug ---> POST: $1/1000 rpi2.0 2024-09-10 09:51:43.399 debug GROUPS: 2 rpi2.0 2024-09-10 09:51:43.398 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:51:43.398 debug ------------- 1000000 rpi2.0 2024-09-10 09:51:43.389 debug ---> test -r /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq || test -r /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq && cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq || echo -1000 rpi2.0 2024-09-10 09:51:43.388 debug PARSING: cpu_frequency rpi2.0 2024-09-10 09:51:43.388 debug PARSING: cpu rpi2.0 2024-09-10 09:51:43.386 debug start parsing rpi2.0 2024-09-10 09:50:45.318 error Cannot initialize/setMode GPIO: TypeError: Cannot read properties of undefined (reading 'output') rpi2.0 2024-09-10 09:50:45.318 debug Port 23 direction: out rpi2.0 2024-09-10 09:50:45.317 debug GPIO chip undefined initialized rpi2.0 2024-09-10 09:50:45.317 debug Got chip: undefined rpi2.0 2024-09-10 09:50:45.317 debug Buttons are pull down. rpi2.0 2024-09-10 09:50:45.317 debug Inputs are pull down. rpi2.0 2024-09-10 09:50:45.317 debug Got 4 from Raspberry Pi 4 Model B Rev 1.4. rpi2.0 2024-09-10 09:50:45.316 debug STDERR: rpi2.0 2024-09-10 09:50:45.315 debug CPU Info: Raspberry Pi 4 Model B Rev 1.4 rpi2.0 2024-09-10 09:50:45.307 debug undefined rpi2.0 2024-09-10 09:50:45.113 debug Creating gpio.24.isInput rpi2.0 2024-09-10 09:50:45.080 debug Creating gpio.23.isInput rpi2.0 2024-09-10 09:50:44.733 debug SETSTATE FOR rpi2.0.wlan.wifi_send VALUE = 0 rpi2.0 2024-09-10 09:50:44.733 debug ---> POST: for wifi_send in [object Object] rpi2.0 2024-09-10 09:50:44.684 debug SETSTATE FOR rpi2.0.wlan.wifi_received VALUE = 0 rpi2.0 2024-09-10 09:50:44.683 debug VALUE: 0 POST: $1*-1 rpi2.0 2024-09-10 09:50:44.683 debug ---> POST: $1*-1 for wifi_received in [object Object] rpi2.0 2024-09-10 09:50:44.674 debug -1 rpi2.0 2024-09-10 09:50:44.673 debug CURRENT = wlan true rpi2.0 2024-09-10 09:50:44.623 debug SETSTATE FOR rpi2.0.uptime.uptime VALUE = 425871.62 rpi2.0 2024-09-10 09:50:44.622 debug ---> POST: for uptime in [object Object] rpi2.0 2024-09-10 09:50:44.614 debug -1 rpi2.0 2024-09-10 09:50:44.614 debug CURRENT = uptime true rpi2.0 2024-09-10 09:50:44.561 debug SETSTATE FOR rpi2.0.temperature.soc_temp VALUE = 46.74 rpi2.0 2024-09-10 09:50:44.561 debug VALUE: 46738 POST: $1/1000 rpi2.0 2024-09-10 09:50:44.560 debug ---> POST: $1/1000 for soc_temp in [object Object] rpi2.0 2024-09-10 09:50:44.553 debug -1 rpi2.0 2024-09-10 09:50:44.553 debug CURRENT = temperature true rpi2.0 2024-09-10 09:50:44.503 debug SETSTATE FOR rpi2.0.swap.swap_used VALUE = 193.65 rpi2.0 2024-09-10 09:50:44.502 debug VALUE: 6500 POST: (rpi.swap_total - $1)/1024 rpi2.0 2024-09-10 09:50:44.502 debug ---> POST: (rpi.swap_total - $1)/1024 for swap_used in [object Object] rpi2.0 2024-09-10 09:50:44.451 debug SETSTATE FOR rpi2.0.swap.swap_total VALUE = 200 rpi2.0 2024-09-10 09:50:44.450 debug VALUE: 204796 POST: $1/1024 rpi2.0 2024-09-10 09:50:44.450 debug ---> POST: $1/1024 for swap_total in [object Object] rpi2.0 2024-09-10 09:50:44.441 debug -1 rpi2.0 2024-09-10 09:50:44.441 debug CURRENT = swap true rpi2.0 2024-09-10 09:50:44.390 debug SETSTATE FOR rpi2.0.sdcard.sdcard_boot_used VALUE = 63.14 rpi2.0 2024-09-10 09:50:44.389 debug VALUE: 64654 POST: $1/1024 rpi2.0 2024-09-10 09:50:44.389 debug ---> POST: $1/1024 for sdcard_boot_used in [object Object] rpi2.0 2024-09-10 09:50:44.338 debug SETSTATE FOR rpi2.0.sdcard.sdcard_root_used VALUE = 5695.12 rpi2.0 2024-09-10 09:50:44.337 debug VALUE: 5831804 POST: $1/1024 rpi2.0 2024-09-10 09:50:44.337 debug ---> POST: $1/1024 for sdcard_root_used in [object Object] rpi2.0 2024-09-10 09:50:44.287 debug SETSTATE FOR rpi2.0.sdcard.sdcard_boot_total VALUE = 509.99 rpi2.0 2024-09-10 09:50:44.287 debug VALUE: 522230 POST: $1/1024 rpi2.0 2024-09-10 09:50:44.286 debug ---> POST: $1/1024 for sdcard_boot_total in [object Object] rpi2.0 2024-09-10 09:50:44.234 debug SETSTATE FOR rpi2.0.sdcard.sdcard_root_total VALUE = 29433.42 rpi2.0 2024-09-10 09:50:44.233 debug VALUE: 30139824 POST: $1/1024 rpi2.0 2024-09-10 09:50:44.233 debug ---> POST: $1/1024 for sdcard_root_total in [object Object] rpi2.0 2024-09-10 09:50:44.225 debug -1 rpi2.0 2024-09-10 09:50:44.225 debug CURRENT = sdcard true rpi2.0 2024-09-10 09:50:44.174 debug SETSTATE FOR rpi2.0.network.net_send VALUE = 162783739 rpi2.0 2024-09-10 09:50:44.173 debug ---> POST: for net_send in [object Object] rpi2.0 2024-09-10 09:50:44.118 debug SETSTATE FOR rpi2.0.network.net_received VALUE = -148333177 rpi2.0 2024-09-10 09:50:44.117 debug VALUE: 148333177 POST: $1*-1 rpi2.0 2024-09-10 09:50:44.117 debug ---> POST: $1*-1 for net_received in [object Object] rpi2.0 2024-09-10 09:50:44.109 debug -1 rpi2.0 2024-09-10 09:50:44.109 debug CURRENT = network true rpi2.0 2024-09-10 09:50:44.058 debug SETSTATE FOR rpi2.0.memory.memory_available VALUE = 1048.1 rpi2.0 2024-09-10 09:50:44.058 debug VALUE: 1073256 POST: $1/1024 rpi2.0 2024-09-10 09:50:44.057 debug ---> POST: $1/1024 for memory_available in [object Object] rpi2.0 2024-09-10 09:50:44.006 debug SETSTATE FOR rpi2.0.memory.memory_free VALUE = 506.56 rpi2.0 2024-09-10 09:50:44.006 debug VALUE: 518716 POST: $1/1024 rpi2.0 2024-09-10 09:50:44.005 debug ---> POST: $1/1024 for memory_free in [object Object] rpi2.0 2024-09-10 09:50:43.953 debug SETSTATE FOR rpi2.0.memory.memory_total VALUE = 1846.94 rpi2.0 2024-09-10 09:50:43.952 debug VALUE: 1891264 POST: $1/1024 rpi2.0 2024-09-10 09:50:43.951 debug ---> POST: $1/1024 for memory_total in [object Object] rpi2.0 2024-09-10 09:50:43.942 debug -1 rpi2.0 2024-09-10 09:50:43.942 debug CURRENT = memory true rpi2.0 2024-09-10 09:50:43.942 debug raspberry disabled -> clean up. rpi2.0 2024-09-10 09:50:43.941 debug -1 rpi2.0 2024-09-10 09:50:43.941 debug CURRENT = raspberry false rpi2.0 2024-09-10 09:50:43.890 debug SETSTATE FOR rpi2.0.cpu.scaling_governor VALUE = ondemand rpi2.0 2024-09-10 09:50:43.889 debug ---> POST: for scaling_governor in [object Object] rpi2.0 2024-09-10 09:50:43.838 debug SETSTATE FOR rpi2.0.cpu.load15 VALUE = 0.07 rpi2.0 2024-09-10 09:50:43.837 debug NAME: load15 VALUE: 0.07 rpi2.0 2024-09-10 09:50:43.837 debug MATCHING: 0.07 rpi2.0 2024-09-10 09:50:43.786 debug SETSTATE FOR rpi2.0.cpu.load5 VALUE = 0.16 rpi2.0 2024-09-10 09:50:43.786 debug NAME: load5 VALUE: 0.16 rpi2.0 2024-09-10 09:50:43.785 debug MATCHING: 0.16 rpi2.0 2024-09-10 09:50:43.736 debug SETSTATE FOR rpi2.0.cpu.load1 VALUE = 0.32 rpi2.0 2024-09-10 09:50:43.735 debug NAME: load1 VALUE: 0.32 rpi2.0 2024-09-10 09:50:43.735 debug MATCHING: 0.32 rpi2.0 2024-09-10 09:50:43.734 debug ---> POST: for load1,load5,load15 in [object Object] rpi2.0 2024-09-10 09:50:43.679 debug SETSTATE FOR rpi2.0.cpu.cpu_frequency VALUE = 1800 rpi2.0 2024-09-10 09:50:43.679 debug VALUE: 1800000 POST: $1/1000 rpi2.0 2024-09-10 09:50:43.678 debug ---> POST: $1/1000 for cpu_frequency in [object Object] rpi2.0 2024-09-10 09:50:43.547 debug -1 rpi2.0 2024-09-10 09:50:43.546 debug CURRENT = cpu true rpi2.0 2024-09-10 09:50:43.543 debug ---> POST: rpi2.0 2024-09-10 09:50:43.542 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.542 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:50:43.541 debug ------------- 0 rpi2.0 2024-09-10 09:50:43.535 debug ---> cat /sys/class/net/wl*/statistics/tx_bytes rpi2.0 2024-09-10 09:50:43.534 debug PARSING: wifi_send rpi2.0 2024-09-10 09:50:43.534 debug ---> POST: $1*-1 rpi2.0 2024-09-10 09:50:43.534 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.534 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:50:43.533 debug ------------- 0 rpi2.0 2024-09-10 09:50:43.527 debug ---> cat /sys/class/net/wl*/statistics/rx_bytes rpi2.0 2024-09-10 09:50:43.527 debug PARSING: wifi_received rpi2.0 2024-09-10 09:50:43.527 debug PARSING: wlan rpi2.0 2024-09-10 09:50:43.527 debug ---> POST: rpi2.0 2024-09-10 09:50:43.527 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.526 debug ---> REGEXP: /(^\S+)/ rpi2.0 2024-09-10 09:50:43.526 debug ------------- 425871.62 1682115.42 rpi2.0 2024-09-10 09:50:43.520 debug ---> cat /proc/uptime rpi2.0 2024-09-10 09:50:43.520 debug PARSING: uptime rpi2.0 2024-09-10 09:50:43.519 debug PARSING: uptime rpi2.0 2024-09-10 09:50:43.519 debug ---> POST: $1/1000 rpi2.0 2024-09-10 09:50:43.519 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.519 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:50:43.518 debug ------------- 46738 rpi2.0 2024-09-10 09:50:43.512 debug ---> cat /sys/devices/virtual/thermal/thermal_zone0/temp rpi2.0 2024-09-10 09:50:43.512 debug PARSING: soc_temp rpi2.0 2024-09-10 09:50:43.511 debug PARSING: temperature rpi2.0 2024-09-10 09:50:43.511 debug ---> POST: (rpi.swap_total - $1)/1024 rpi2.0 2024-09-10 09:50:43.511 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.511 debug ---> REGEXP: /SwapFree:\s+(\d+)/m rpi2.0 2024-09-10 09:50:43.510 debug ------------- MemTotal: 1891264 kB MemFree: 518516 kB MemAvailable: 1073008 kB Buffers: 81276 kB Cached: 503240 kB SwapCached: 1752 kB Active: 534156 kB Inactive: 732040 kB Active(anon): 479580 kB Inactive(anon): 202124 kB Active(file): 54576 kB Inactive(file): 529916 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6500 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 104 kB Writeback: 0 kB AnonPages: 679896 kB Mapped: 86588 kB Shmem: 24 kB KReclaimable: 38188 kB Slab: 62956 kB SReclaimable: 38188 kB SUnreclaim: 24768 kB KernelStack: 4324 kB PageTables: 6576 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553012 kB VmallocTotal: 257687552 kB VmallocUsed: 11984 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB rpi2.0 2024-09-10 09:50:43.504 debug ---> cat /proc/meminfo rpi2.0 2024-09-10 09:50:43.504 debug PARSING: swap_used rpi2.0 2024-09-10 09:50:43.504 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:50:43.503 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.503 debug ---> REGEXP: /SwapTotal:\s+(\d+)/m rpi2.0 2024-09-10 09:50:43.502 debug ------------- MemTotal: 1891264 kB MemFree: 518216 kB MemAvailable: 1072708 kB Buffers: 81276 kB Cached: 503240 kB SwapCached: 1752 kB Active: 534156 kB Inactive: 732040 kB Active(anon): 479580 kB Inactive(anon): 202124 kB Active(file): 54576 kB Inactive(file): 529916 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6500 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 104 kB Writeback: 0 kB AnonPages: 679896 kB Mapped: 86688 kB Shmem: 24 kB KReclaimable: 38188 kB Slab: 62956 kB SReclaimable: 38188 kB SUnreclaim: 24768 kB KernelStack: 4352 kB PageTables: 6576 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553012 kB VmallocTotal: 257687552 kB VmallocUsed: 11984 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB rpi2.0 2024-09-10 09:50:43.496 debug ---> cat /proc/meminfo rpi2.0 2024-09-10 09:50:43.496 debug PARSING: swap_total rpi2.0 2024-09-10 09:50:43.496 debug PARSING: swap rpi2.0 2024-09-10 09:50:43.496 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:50:43.495 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.495 debug ---> REGEXP: /\S+\s+\d+\s+(\d+).*\/boot/m rpi2.0 2024-09-10 09:50:43.493 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / rpi2.0 2024-09-10 09:50:43.485 debug ---> df /boot/* rpi2.0 2024-09-10 09:50:43.484 debug PARSING: sdcard_boot_used rpi2.0 2024-09-10 09:50:43.484 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:50:43.483 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.483 debug ---> REGEXP: /\S+\s+\d+\s+(\d+).*\/$/m rpi2.0 2024-09-10 09:50:43.482 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831804 22757492 21% / rpi2.0 2024-09-10 09:50:43.473 debug ---> df / rpi2.0 2024-09-10 09:50:43.473 debug PARSING: sdcard_root_used rpi2.0 2024-09-10 09:50:43.472 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:50:43.472 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.472 debug ---> REGEXP: /\S+\s+(\d+).*\/boot/m rpi2.0 2024-09-10 09:50:43.470 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p1 522230 64654 457576 13% /boot/firmware /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / /dev/mmcblk0p2 30139824 5831804 22757492 21% / rpi2.0 2024-09-10 09:50:43.463 debug ---> df /boot/* rpi2.0 2024-09-10 09:50:43.463 debug PARSING: sdcard_boot_total rpi2.0 2024-09-10 09:50:43.463 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:50:43.462 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.462 debug ---> REGEXP: /\S+\s+(\d+).*\/$/m rpi2.0 2024-09-10 09:50:43.461 debug ------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30139824 5831804 22757492 21% / rpi2.0 2024-09-10 09:50:43.454 debug ---> df / rpi2.0 2024-09-10 09:50:43.454 debug PARSING: sdcard_root_total rpi2.0 2024-09-10 09:50:43.454 debug PARSING: sdcard rpi2.0 2024-09-10 09:50:43.453 debug ---> POST: rpi2.0 2024-09-10 09:50:43.453 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.453 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:50:43.452 debug ------------- 162783739 rpi2.0 2024-09-10 09:50:43.447 debug ---> cat /sys/class/net/e*/statistics/tx_bytes rpi2.0 2024-09-10 09:50:43.446 debug PARSING: net_send rpi2.0 2024-09-10 09:50:43.446 debug ---> POST: $1*-1 rpi2.0 2024-09-10 09:50:43.446 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.446 debug ---> REGEXP: /(.*)/ rpi2.0 2024-09-10 09:50:43.445 debug ------------- 148333177 rpi2.0 2024-09-10 09:50:43.439 debug ---> cat /sys/class/net/e*/statistics/rx_bytes rpi2.0 2024-09-10 09:50:43.439 debug PARSING: net_received rpi2.0 2024-09-10 09:50:43.439 debug PARSING: network rpi2.0 2024-09-10 09:50:43.439 debug ---> POST: $1/1024 rpi2.0 2024-09-10 09:50:43.439 debug GROUPS: 2 rpi2.0 2024-09-10 09:50:43.438 debug ---> REGEXP: /MemAvailable:\s+(\d+)/m rpi2.0 2024-09-10 09:50:43.437 debug ------------- MemTotal: 1891264 kB MemFree: 518764 kB MemAvailable: 1073256 kB Buffers: 81276 kB Cached: 503240 kB SwapCached: 1752 kB Active: 533516 kB Inactive: 732040 kB Active(anon): 478940 kB Inactive(anon): 202124 kB Active(file): 54576 kB Inactive(file): 529916 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 204796 kB SwapFree: 6500 kB Zswap: 0 kB Zswapped: 0 kB Dirty: 104 kB Writeback: 0 kB AnonPages: 679248 kB Mapped: 86588 kB Shmem: 24 kB KReclaimable: 38188 kB Slab: 62956 kB SReclaimable: 38188 kB SUnreclaim: 24768 kB KernelStack: 4324 kB PageTables: 6476 kB SecPageTables: 0 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1150428 kB Committed_AS: 1553012 kB VmallocTotal: 257687552 kB VmallocUsed: 11984 kB VmallocChunk: 0 kB Percpu: 672 kB CmaTotal: 524288 kB CmaFree: 319716 kB
-
Das dürfte der relevante Teil sein. Das sieht eigentlich sauber aus. Für mich sieht das immer noch aus, als würde die Schnittstelle zur GPIO-Library fehlen bzw. nicht installiert sein. An der Stelle muss ich erstmal wieder gucken, weil ich noch nicht verstehe wie da das Zusammenspiel zwischen NodeJS und der auf dem System installierten Bibliothek aussieht. Da man die dev Version davon installieren muss und weil diese bei der Installation des Adapters vorhanden sein muss, vermute ich mal, dass bei der Installation noch Binärcode erzeugt wird, der dann von der JS Bibliothek im Hintergrund angesprochen wird. Eventuell fehlen da auf deinem System irgendwelche Build Tools oder so? Ich werde mich da mal reinfuchsen und dann wieder melden.
rpi2.0 2024-09-10 09:50:45.318 error Cannot initialize/setMode GPIO: TypeError: Cannot read properties of undefined (reading 'output') rpi2.0 2024-09-10 09:50:45.318 debug Port 23 direction: out rpi2.0 2024-09-10 09:50:45.317 debug GPIO chip undefined initialized rpi2.0 2024-09-10 09:50:45.317 debug Got chip: undefined rpi2.0 2024-09-10 09:50:45.317 debug Buttons are pull down. rpi2.0 2024-09-10 09:50:45.317 debug Inputs are pull down. rpi2.0 2024-09-10 09:50:45.317 debug Got 4 from Raspberry Pi 4 Model B Rev 1.4. rpi2.0 2024-09-10 09:50:45.316 debug STDERR: rpi2.0 2024-09-10 09:50:45.315 debug CPU Info: Raspberry Pi 4 Model B Rev 1.4 rpi2.0 2024-09-10 09:50:45.307 debug undefined rpi2.0 2024-09-10 09:50:45.113 debug Creating gpio.24.isInput rpi2.0 2024-09-10 09:50:45.080 debug Creating gpio.23.isInput