UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[flodirmann]

@asgothian
Danke danke danke!
Das hat tatsächlich endlich geholfen. :+1:

[stauber]

Hallo zusammen,

seit gestern läuft der Zigbee Adapter nicht mehr ich musste gestern Router und Rasp abstecken und seitdem wird er nur noch Orange.

Bei mir stand die ganze Zeit das Node js v22.x empfohlen wird seit dem letzten Update wird nun die 18.x empfohlen im Forum wiederum die 20.x welche soll ich jetzt Installieren?
Mit den Befehl iob Node js-update 18 bleibt er bei 22.x hab ich schon Probiert gibt es noch eine andere Möglichkeit?

Hardware
Raspberry4 und das CC26x02R1

Ansonsten könntet ihr mir irgendwie weiterhelfen?

[Thomas Braun]

@stauber

iob nodejs-update 20

Und dann mal die Ausgabe von

iob diag

Da kannst du den Link 'by-id' herausnehmen und in den Einstellungen des Adapters statt /dev/ttyACM0 eintragen.

[stauber]

@thomas-braun

Hallo Thomas

bleib weiterhin auf 22.4
nochmal zur Verständnis ich Kopiere den Text danach y

oder mach ich was Falsch?

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

oder mach ich was Falsch?

Ich weiß nicht was du machst...

Du sollst

iob nodejs-update 20

in dein Terminal hacken.

[stauber]

@thomas-braun sagte in Zigbee iobroker Error while opening serialport:

iob nodejs-update 20

Das mach ich auch
nur er Zeigt immer noch v22.4

ioBroker nodejs fixer 2024-05-23
You requested to install latest version from nodejs v20 tree.

Your current setup is:
/usr/bin/nodejs         v22.4.1
/usr/bin/node           v22.4.1
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.2

We found these nodejs versions available for installation:

nodejs:
  Installed: 22.4.1-1nodesource1
  Candidate: 22.4.1-1nodesource1
  Version table:
 *** 22.4.1-1nodesource1 100
        100 /var/lib/dpkg/status
     20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages



Nothing to do - Your installation is using the correct paths.

You are running nodejs v22.4.1. Do you want to install latest version from nodejs v.20 tree?

Press <y> to continue or any other key to quit
Trying to fix your installation now. Please be patient.
rm: cannot remove '/usr/share/keyrings/nodesource.gpg'$'\n''/etc/apt/keyrings/nodesource.gpg': No such file or directory
Waiting for ioBroker to shut down - Give me a minute...
############################################################

*** These repos are active on your system:
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done

*** Installing ca-certificates, curl and gnupg, just in case they are missing.

*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source

deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_20.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001

*** These repos are active after the adjustments:
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Get:4 https://deb.nodesource.com/node_20.x nodistro InRelease [12.1 kB]
Get:5 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages [8461 B]
Fetched 20.6 kB in 1s (20.3 kB/s)
Reading package lists... Done

Installing nodejs now!

Installing the nodejs!

We tried our best to fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

node -v

sagt?

[stauber]

@thomas-braun
auch 22

[Thomas Braun]

@stauber

Bitte keine Bildchen von Text.

sudo apt update
sudo apt install nodejs=20.15.1-1nodesource1

[stauber]

@thomas-braun

ok das hat funktioniert vielen Dank!

jetzt mit

iob diag 

Kannst du mir sagen wo ungefähr die by id steht?

[Thomas Braun]

@stauber

Poste die Langfassung in Gänze.

[stauber]

@thomas-braun

Skript v.2024-05-22

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 32 bit

Systemuptime and Load:
 19:48:08 up 23:11,  1 user,  load average: 0.64, 0.87, 0.91
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2024-07-14 19:48:08 CEST
           Universal time: Sun 2024-07-14 17:48:08 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.0G        1.5G        0.0K        1.2G        2.7G
Swap:            99M          0B         99M
Total:          3.9G        1.0G        1.6G

Active iob-Instances:   22

         3793 M total memory
         1018 M used memory
         1067 M active memory
          957 M inactive memory
         1540 M free memory
          251 M buffer memory
          981 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 19:48:09 up 23:11,  1 user,  load average: 0.67, 0.87, 0.91
Tasks: 174 total,   1 running, 173 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.9 us,  2.9 sy,  0.0 ni, 94.2 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3793.3 total,   1540.2 free,   1019.4 used,   1233.7 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   2697.6 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      220G  8.2G  203G   4% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  892K  758M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jul 13 20:36:26 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:5B:D6:24 vc_mem.mem_base                                                                     =0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=61bf9d36-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): write access will be enabled during recovery
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): recovery complete
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Jul 13 20:36:28 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Sat Jul 13 20:36:30 2024] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET                       SOURCE     FSTYPE     OPTIONS
/                            /dev/sda2  ext4       rw,noatime
|-/dev                       devtmpfs   devtmpfs   rw,relatime,size=1677960k,nr_inodes=419490,mode=755
| |-/dev/shm                 tmpfs      tmpfs      rw,nosuid,nodev
| |-/dev/pts                 devpts     devpts     rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| `-/dev/mqueue              mqueue     mqueue     rw,nosuid,nodev,noexec,relatime
|-/proc                      proc       proc       rw,relatime
| `-/proc/sys/fs/binfmt_misc systemd-1  autofs     rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct
|-/sys                       sysfs      sysfs      rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security     securityfs securityfs rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup           cgroup2    cgroup2    rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore           pstore     pstore     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf              bpf        bpf        rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug        debugfs    debugfs    rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing      tracefs    tracefs    rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections fusectl    fusectl    rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config       configfs   configfs   rw,nosuid,nodev,noexec,relatime
|-/run                       tmpfs      tmpfs      rw,nosuid,nodev,size=776876k,nr_inodes=819200,mode=755
| |-/run/lock                tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs          sunrpc     rpc_pipefs rw,relatime
| `-/run/user/1000           tmpfs      tmpfs      rw,nosuid,nodev,relatime,size=388436k,nr_inodes=97109,mode=700,uid=1000,gid=1000
`-/boot                      /dev/sda1  vfat       rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
2.6G    /var/
1.3G    /var/log/journal/3e23e34d17484a28b9473f69f7d9d21c
1.3G    /var/log/journal
1.3G    /var/log
1.2G    /var/cache/apt

Archived and active journals take up 1.2G in the file system.

/opt/iobroker/backups:
121M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
604M    /opt/iobroker/iobroker-data/
439M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/files/javascript.admin
136M    /opt/iobroker/iobroker-data/backup-objects
118M    /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
26M     /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.8947f24d.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if00

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0



*** NodeJS-Installation ***

/usr/bin/nodejs         v20.15.1
/usr/bin/node           v20.15.1
/usr/bin/npm            10.7.0
/usr/bin/npx            10.7.0
/usr/bin/corepack       0.28.1


nodejs:
  Installed: 20.15.1-1nodesource1
  Candidate: 20.15.1-1nodesource1
  Version table:
 *** 20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.17.14
javascript:     8.3.1

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : raspberrypi                              - disabled
+ system.adapter.awtrix-light.0           : awtrix-light          : raspberrypi                              -  enabled
+ system.adapter.awtrix-light.1           : awtrix-light          : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.birthdays.0              : birthdays             : raspberrypi                              -  enabled
  system.adapter.cloud.0                  : cloud                 : raspberrypi                              - disabled
  system.adapter.denon.0                  : denon                 : raspberrypi                              - disabled
  system.adapter.devices.0                : devices               : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              -  enabled
+ system.adapter.fullcalendar.0           : fullcalendar          : raspberrypi                              -  enabled
+ system.adapter.govee-local.0            : govee-local           : raspberrypi                              -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : raspberrypi                              - disabled
+ system.adapter.hmip.0                   : hmip                  : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
  system.adapter.iot.0                    : iot                   : raspberrypi                              - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.klf200.0                 : klf200                : raspberrypi                              -  enabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              - disabled, port: 54321
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.nuki-extended.0          : nuki-extended         : raspberrypi                              - disabled
  system.adapter.nuki.0                   : nuki                  : raspberrypi                              - disabled
  system.adapter.places.0                 : places                : raspberrypi                              - disabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.statistics.0             : statistics            : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
  system.adapter.web.0                    : web                   : raspberrypi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyACM0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.17.14  , installed 6.17.14
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awtrix-light" : 1.2.0    , installed 1.2.0
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "birthdays"    : 3.0.0    , installed 3.0.0
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "denon"        : 1.15.5   , installed 1.15.5
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
Adapter    "fullcalendar" : 2.3.17   , installed 2.3.17
Adapter    "govee-local"  : 0.2.6    , installed 0.2.6
Adapter    "heatingcontrol": 2.12.8  , installed 2.12.8
Adapter    "heos"         : 2.2.1    , installed 2.2.1
Adapter    "hmip"         : 1.23.3   , installed 1.23.3
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.3.1    , installed 8.3.1
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "klf200"       : 1.2.0    , installed 1.2.0
Adapter    "mihome-vacuum": 4.2.0    , installed 4.2.0
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "nuki"         : 2.0.0    , installed 2.0.0
Adapter    "nuki-extended": 2.7.0    , installed 2.7.0
Adapter    "places"       : 1.2.0    , installed 1.2.0
Adapter    "rest-api"     : 2.0.1    , installed 2.0.1
Adapter    "scenes"       : 3.0.4    , installed 3.0.4
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 3.3.2    , installed 3.3.2
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.1    , installed 2.6.1
Adapter    "yr"           : 5.3.0    , installed 5.3.0
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        9591
States:         7847

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      109        14805      522/mosquitto
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       703780     4069/io.shelly.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12860      524/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       702593     3884/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       702596     3884/iobroker.js-co
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       701671     3902/io.admin.0
tcp6       0      0 :::1883                 :::*                    LISTEN      109        14806      522/mosquitto
tcp6       0      0 :::22                   :::*                    LISTEN      0          12862      524/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        15505      394/avahi-daemon: r
udp        0      0 127.0.0.1:4002          0.0.0.0:*                           1001       705775     4736/io.govee-local
udp        0      0 0.0.0.0:34863           0.0.0.0:*                           108        15507      394/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14846      734/dhcpcd
udp6       0      0 :::5353                 :::*                                108        15506      394/avahi-daemon: r
udp6       0      0 :::50567                :::*                                108        15508      394/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          15746      734/dhcpcd

*** Log File - Last 25 Lines ***

2024-07-14 19:46:11.260  - info: zigbee.0 (4000) Got terminate signal TERMINATE_YOURSELF
2024-07-14 19:46:11.381  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2024-07-14 19:46:11.263  - info: zigbee.0 (4000) cleaned everything up...
2024-07-14 19:46:11.285  - info: zigbee.0 (4000) Zigbee: disabling joining new devices.
2024-07-14 19:46:11.529  - warn: zigbee.0 (4000) Failed to stop zigbee during startup
2024-07-14 19:46:11.530  - info: zigbee.0 (4000) terminating
2024-07-14 19:46:11.531  - info: zigbee.0 (4000) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-14 19:46:11.601  - info: zigbee.0 (4000) debug devices set to []
2024-07-14 19:46:11.765  - info: zigbee.0 (4000) terminating
2024-07-14 19:46:12.143  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-14 19:46:12.272  - info: host.raspberrypi "system.adapter.zigbee.0" enabled
2024-07-14 19:46:12.522  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 5046
2024-07-14 19:46:18.289  - info: zigbee.0 (5046) starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.15.1, js-controller: 5.0.19
2024-07-14 19:46:18.399  - info: zigbee.0 (5046) delete old Backup files. keep only last 10
2024-07-14 19:46:18.402  - info: zigbee.0 (5046) Starting Zigbee  npm ...
2024-07-14 19:46:18.831  - info: zigbee.0 (5046) Installed Version: iobroker.zigbee@1.10.3
2024-07-14 19:46:39.534  - error: zigbee.0 (5046) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2024-07-14 19:46:39.535  - error: zigbee.0 (5046) Failed to start Zigbee
2024-07-14 19:46:39.536  - error: zigbee.0 (5046) Error herdsman start
2024-07-14 19:46:49.540  - info: zigbee.0 (5046) Try to reconnect. 1 attempts left
2024-07-14 19:46:49.541  - info: zigbee.0 (5046) Starting Zigbee  npm ...
2024-07-14 19:46:49.555  - info: zigbee.0 (5046) Installed Version: iobroker.zigbee@1.10.3
2024-07-14 19:46:49.827  - error: zigbee.0 (5046) Starting zigbee-herdsman problem : "Error Resource temporarily unavailable Cannot lock port"
2024-07-14 19:46:49.828  - error: zigbee.0 (5046) Failed to start Zigbee
2024-07-14 19:46:49.829  - error: zigbee.0 (5046) Error herdsman start

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

Userland : 32 bit

Beizeiten mal komplett neuaufsetzen, dann in einer reinen 64Bit-Version.

Boot Target: graphical.target

sudo systemctl set-default multi-user.target

[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): write access will be enabled during recovery

Dein Dateisystem hat Einschläge.

by-id:

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if00

einer der beiden Einträge muss in den Einstellungen eingetragen werden. Musst du mal ausprobieren, ob if03 oder if00 passt.

Schmeiß die Quelle
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
raus.

[stauber]

@thomas-braun

Dein Dateisystem hat Einschläge.

by-id:

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if00

einer der beiden Einträge muss in den Einstellungen eingetragen werden. Musst du mal ausprobieren, ob if03 oder if00 passt.

Nein bleibt Orange bei beiden Einträgen
kann es sein das die Erweiterte Pan falsch ist? Hab ein Backupgeladen das vor 2 Tagen da ist alles noch gelaufen.

Schmeiß die Quelle
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
raus.

Wie mach ich das?

Vielen Dank für deine Unterstützung und deine Mühen

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

Wie mach ich das?

Lösch die entsprechende Zeile in der Datei /etc/apt/sources.list raus.

[stauber]

@thomas-braun sagte in Zigbee iobroker Error while opening serialport:

/etc/apt/sources.list

pi@raspberrypi:~ $ /etc/apt/sources.list
-bash: /etc/apt/sources.list: Keine Berechtigung
pi@raspberrypi:~ $

er sagt ich habe keine Berechtigung

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

er sagt ich habe keine Berechtigung

Du verwendest ja auch kein Kommando...

sudo nano /etc/apt/sources.list

Speichern mit Strg-O, nano verlassen mit Strg-X

[arteck]

@thomas-braun sagte in Zigbee iobroker Error while opening serialport:

-if00

ist es immer

[stauber]

Hallo zusammen,

tut mir leid das ich mich jetzt erst melde hatte viel zu tun in der Arbeit.
Heute hab ich einen Stick von Sonoff ausprobiert und siehe das es läuft wieder ich vermute das das Board einfach defekt ist.

Danke nochmal für eure Hilfe

[searcher57]

@thomas-braun said in Zigbee iobroker Error while opening serialport:

@stauber sagte in Zigbee iobroker Error while opening serialport:

er sagt ich habe keine Berechtigung

Du verwendest ja auch kein Kommando...

sudo nano /etc/apt/sources.list

Speichern mit Strg-O, nano verlassen mit Strg-X

Hallo Thomas,
jetzt bin ich am Ende! Nachdem ich Probleme mit dem Smartmeter-Adapter (Stromwerte), RPI2 Adapter (Gaswerte) kommt jetzt auch noch der Zigbee Adapter hinzu. Ich habe alles rauf und runter mit einem Raspi 5 8GB probiert. Danach habe ich den Raspi 4 8GB getestet. Auch da bekomme ich den Adapter nicht ans laufen.
Hier das Log des Raspi 5:

zigbee.0
	2024-09-26 15:45:02.137	error	Error herdsman start
zigbee.0
	2024-09-26 15:45:02.137	error	Failed to start Zigbee
zigbee.0
	2024-09-26 15:45:02.136	error	Starting zigbee-herdsman problem : "Error Resource temporarily unavailable Cannot lock port"
zigbee.0
	2024-09-26 15:45:02.061	info	Installed Version: iobroker.zigbee@1.10.3
zigbee.0
	2024-09-26 15:45:02.054	info	Starting Zigbee npm ...
zigbee.0
	2024-09-26 15:45:02.053	info	Try to reconnect. 1 attempts left
zigbee.0
	2024-09-26 15:44:52.052	error	Error herdsman start
zigbee.0
	2024-09-26 15:44:52.052	error	Failed to start Zigbee
zigbee.0
	2024-09-26 15:44:52.051	error	Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"
zigbee.0
	2024-09-26 15:44:51.664	info	Installed Version: iobroker.zigbee@1.10.3
zigbee.0
	2024-09-26 15:44:51.465	info	Starting Zigbee npm ...
zigbee.0
	2024-09-26 15:44:51.464	info	delete old Backup files. keep only last 10
zigbee.0
	2024-09-26 15:44:51.433	info	starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.17.0, js-controller: 6.0.11
zigbee.0
	2024-09-26 15:43:06.087	info	terminating
zigbee.0
	2024-09-26 15:43:05.820	info	Terminated (NO_ERROR): Without reason
zigbee.0
	2024-09-26 15:43:05.819	info	terminating
zigbee.0
	2024-09-26 15:43:05.818	info	debug devices set to []
zigbee.0
	2024-09-26 15:43:05.815	info	Got terminate signal TERMINATE_YOURSELF
zigbee.0
	2024-09-26 15:43:05.808	warn	Failed to stop zigbee during startup
zigbee.0
	2024-09-26 15:43:06.087	info	terminating
zigbee.0
	2024-09-26 15:43:05.820	info	Terminated (NO_ERROR): Without reason
zigbee.0
	2024-09-26 15:43:05.819	info	terminating
zigbee.0
	2024-09-26 15:43:05.818	info	debug devices set to []
zigbee.0
	2024-09-26 15:43:05.815	info	Got terminate signal TERMINATE_YOURSELF

iob diag:

Skript v.2024-05-22

*** BASE SYSTEM ***
 Static hostname: Raspi58GB
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.47+rpt-rpi-2712
    Architecture: arm64

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 15:47:28 up 4 min,  2 users,  load average: 0.37, 0.65, 0.33
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2024-09-26 15:47:28 CEST
           Universal time: Thu 2024-09-26 13:47:28 UTC
                 RTC time: Thu 2024-09-26 13:47:28
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.4G        2.1G        5.6G        5.6M        792M        6.3G
Swap:           209M          0B        209M
Total:          8.7G        2.1G        5.8G

Active iob-Instances:   25

         8052 M total memory
         2020 M used memory
         2032 M active memory
          401 M inactive memory
         5370 M free memory
           61 M buffer memory
          693 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 15:47:28 up 4 min,  2 users,  load average: 0.37, 0.65, 0.33
Tasks: 197 total,   2 running, 195 sleeping,   0 stopped,   0 zombie
%Cpu(s): 40.0 us,  0.0 sy,  0.0 ni, 40.0 id, 20.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8052.3 total,   5367.8 free,   2023.6 used,    755.4 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   6028.8 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs          tmpfs     806M  5.3M  800M   1% /run
/dev/mmcblk0p2 ext4       59G   14G   42G  25% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/sda1      exfat      29G  379M   29G   2% /mnt/usb0
/dev/mmcblk0p1 vfat      510M   64M  447M  13% /boot/firmware
tmpfs          tmpfs     806M     0  806M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Sep 26 15:43:19 2024] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe  smsc95xx.macaddr=2C:CF:67:2F:A6:31 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=tty1 root=PARTUUID=4e8600df-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu Sep 26 15:43:20 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[Thu Sep 26 15:43:22 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.

Show mounted filesystems:
TARGET                                                  SOURCE         FSTYPE      OPTIONS
/                                                       /dev/mmcblk0p2 ext4        rw,noatime
|-/sys                                                  sysfs          sysfs       rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                                securityfs     securityfs  rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                                      cgroup2        cgroup2     rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore                                      pstore         pstore      rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                                         bpf            bpf         rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/tracing                                 tracefs        tracefs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/debug                                   debugfs        debugfs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/config                                  configfs       configfs    rw,nosuid,nodev,noexec,relatime
| `-/sys/fs/fuse/connections                            fusectl        fusectl     rw,nosuid,nodev,noexec,relatime
|-/proc                                                 proc           proc        rw,relatime
| `-/proc/sys/fs/binfmt_misc                            systemd-1      autofs      rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=4766
|   `-/proc/sys/fs/binfmt_misc                          binfmt_misc    binfmt_misc rw,nosuid,nodev,noexec,relatime
|-/dev                                                  udev           devtmpfs    rw,nosuid,relatime,size=3950672k,nr_inodes=246917,mode=755
| |-/dev/pts                                            devpts         devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                            tmpfs          tmpfs       rw,nosuid,nodev
| `-/dev/mqueue                                         mqueue         mqueue      rw,nosuid,nodev,noexec,relatime
|-/run                                                  tmpfs          tmpfs       rw,nosuid,nodev,noexec,relatime,size=824560k,mode=755
| |-/run/lock                                           tmpfs          tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/credentials/systemd-sysctl.service             ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-sysusers.service           ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/rpc_pipefs                                     sunrpc         rpc_pipefs  rw,relatime
| |-/run/credentials/systemd-tmpfiles-setup.service     ramfs          ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| `-/run/user/1000                                      tmpfs          tmpfs       rw,nosuid,nodev,relatime,size=824544k,nr_inodes=206136,mode=700,uid=1000,gid=1000
|-/mnt/usb0                                             /dev/sda1      exfat       rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro
`-/boot/firmware                                        /dev/mmcblk0p1 vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
6.4G    /var/
5.3G    /var/lib
5.1G    /var/lib/influxdb/engine/data
5.1G    /var/lib/influxdb/engine
5.1G    /var/lib/influxdb

Archived and active journals take up 634.8M in the file system.

/opt/iobroker/backups:
45M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.2G    /opt/iobroker/iobroker-data/
1.1G    /opt/iobroker/iobroker-data/files
441M    /opt/iobroker/iobroker-data/files/javascript.admin
409M    /opt/iobroker/iobroker-data/files/javascript.admin/static
408M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0

Your zigbee.0 COM-Port is matching 'by-id'. Very good!



*** NodeJS-Installation ***

/usr/bin/nodejs         v20.17.0
/usr/bin/node           v20.17.0
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.3


nodejs:
  Installed: 20.17.0-1nodesource1
  Candidate: 20.17.0-1nodesource1
  Version table:
 *** 20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  6.0.11
admin:          7.1.2
javascript:     8.7.6

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : Raspi58GB                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : Raspi58GB                                -  enabled
  system.adapter.alias-manager.0          : alias-manager         : Raspi58GB                                - disabled
+ system.adapter.awtrix-light.0           : awtrix-light          : Raspi58GB                                -  enabled
+ system.adapter.backitup.0               : backitup              : Raspi58GB                                -  enabled
+ system.adapter.broadlink2.0             : broadlink2            : Raspi58GB                                -  enabled
  system.adapter.devices.0                : devices               : Raspi58GB                                - disabled
  system.adapter.discovery.0              : discovery             : Raspi58GB                                - disabled
+ system.adapter.doorbird.0               : doorbird              : Raspi58GB                                -  enabled
+ system.adapter.echarts.0                : echarts               : Raspi58GB                                -  enabled
+ system.adapter.followthesun.0           : followthesun          : Raspi58GB                                -  enabled
+ system.adapter.frontier_silicon.0       : frontier_silicon      : Raspi58GB                                -  enabled
  system.adapter.frontier_silicon.1       : frontier_silicon      : Raspi58GB                                - disabled
  system.adapter.frontier_silicon.2       : frontier_silicon      : Raspi58GB                                - disabled
  system.adapter.frontier_silicon.3       : frontier_silicon      : Raspi58GB                                - disabled
+ system.adapter.hm-rega.0                : hm-rega               : Raspi58GB                                -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspi58GB                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspi58GB                                -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : Raspi58GB                                -  enabled, port: 8086
+ system.adapter.iot.0                    : iot                   : Raspi58GB                                -  enabled
+ system.adapter.javascript.0             : javascript            : Raspi58GB                                -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : Raspi58GB                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.rpi2.0                   : rpi2                  : Raspi58GB                                -  enabled
+ system.adapter.shelly.0                 : shelly                : Raspi58GB                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspi58GB                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.smartmeter.0             : smartmeter            : Raspi58GB                                - disabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : Raspi58GB                                -  enabled
+ system.adapter.telegram.0               : telegram              : Raspi58GB                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.vis-2.0                  : vis-2                 : Raspi58GB                                -  enabled
  system.adapter.vis.0                    : vis                   : Raspi58GB                                -  enabled
+ system.adapter.web.0                    : web                   : Raspi58GB                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : Raspi58GB                                -  enabled
+ system.adapter.zigbee.0                 : zigbee                : Raspi58GB                                -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Raspi58GB                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : Raspi58GB                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : Raspi58GB                                -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : Raspi58GB                                -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : Raspi58GB                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : Raspi58GB                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Raspi58GB                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.telegram.0               : telegram              : Raspi58GB                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : Raspi58GB                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : Raspi58GB                                -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0867d5d6b78ded11959b02f6b86ce6f8-if00-port0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.1.2    , installed 7.1.2
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awtrix-light" : 1.3.0    , installed 1.3.0
Adapter    "backitup"     : 3.0.22   , installed 3.0.22
Adapter    "broadlink2"   : 2.3.0    , installed 2.3.0
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "doorbird"     : 1.7.0    , installed 1.7.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "followthesun" : 0.5.1    , installed 0.5.1
Adapter    "frontier_silicon": 0.3.0 , installed 0.3.0
Adapter    "hm-rega"      : 5.0.0    , installed 5.0.0
Adapter    "hm-rpc"       : 1.17.0   , installed 1.17.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.7.6    , installed 8.7.6
Controller "js-controller": 6.0.11   , installed 6.0.11
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 1.3.2    , installed 2.0.0
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 3.9.0    , installed 3.9.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.32   , installed 2.9.32
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yr"           : 5.3.0    , installed 5.3.0
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        11825
States:         9324

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:6 https://repos.influxdata.com/debian stable InRelease
Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.178.57:2001     0.0.0.0:*               LISTEN      1001       6795       1179/io.hm-rpc.1
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      106        7371       814/mosquitto
tcp        0      0 192.168.178.57:42010    0.0.0.0:*               LISTEN      1001       6776       1164/io.hm-rpc.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          5765       829/sshd: /usr/sbin
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       7487       946/iobroker.js-con
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       7492       946/iobroker.js-con
tcp        0      0 192.168.178.57:8100     0.0.0.0:*               LISTEN      1001       8840       1313/io.doorbird.0
tcp6       0      0 :::1883                 :::*                    LISTEN      106        7372       814/mosquitto
tcp6       0      0 :::22                   :::*                    LISTEN      0          5767       829/sshd: /usr/sbin
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       9544       1359/io.simple-api.
tcp6       0      0 :::8086                 :::*                    LISTEN      999        8359       884/influxd
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       9610       1421/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       7530       965/io.admin.0
udp        0      0 0.0.0.0:37934           0.0.0.0:*                           1001       6727       1119/io.broadlink2.
udp        0      0 0.0.0.0:50257           0.0.0.0:*                           1001       7729       1119/io.broadlink2.
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        5702       671/avahi-daemon: r
udp        0      0 0.0.0.0:38186           0.0.0.0:*                           1001       6721       1119/io.broadlink2.
udp        0      0 0.0.0.0:46537           0.0.0.0:*                           1001       6726       1119/io.broadlink2.
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       7818       1252/io.shelly.0
udp        0      0 0.0.0.0:55117           0.0.0.0:*                           1001       6723       1119/io.broadlink2.
udp        0      0 0.0.0.0:39374           0.0.0.0:*                           104        5704       671/avahi-daemon: r
udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1001       6717       1119/io.broadlink2.
udp        0      0 0.0.0.0:39813           0.0.0.0:*                           1001       6722       1119/io.broadlink2.
udp        0      0 0.0.0.0:44924           0.0.0.0:*                           1001       6725       1119/io.broadlink2.
udp        0      0 0.0.0.0:57524           0.0.0.0:*                           1001       6720       1119/io.broadlink2.
udp        0      0 0.0.0.0:53786           0.0.0.0:*                           1001       6724       1119/io.broadlink2.
udp        0      0 0.0.0.0:58130           0.0.0.0:*                           1001       6729       1119/io.broadlink2.
udp        0      0 0.0.0.0:45874           0.0.0.0:*                           1001       6728       1119/io.broadlink2.
udp6       0      0 :::5353                 :::*                                104        5703       671/avahi-daemon: r
udp6       0      0 :::59656                :::*                                104        5705       671/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-09-26 15:45:09.621  - info: simple-api.0 (1359) Allow states only when user is owner: false
2024-09-26 15:45:09.628  - info: simple-api.0 (1359) http server listening on port 8087
2024-09-26 15:45:12.658  - info: host.Raspi58GB instance system.adapter.tankerkoenig.0 in version "3.4.0" started with pid 1374
2024-09-26 15:45:13.651  - info: tankerkoenig.0 (1374) starting. Version 3.4.0 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v20.17.0, js-controller: 6.0.11
2024-09-26 15:45:13.670  - info: tankerkoenig.0 (1374) Adapter is already in daemon mode
2024-09-26 15:45:13.671  - info: tankerkoenig.0 (1374) Sync time set to 30 minutes or 1800000 ms
2024-09-26 15:45:16.680  - info: host.Raspi58GB instance system.adapter.vis-2.0 in version "2.9.32" started with pid 1389
2024-09-26 15:45:17.906  - info: vis-2.0 (1389) starting. Version 2.9.32 in /opt/iobroker/node_modules/iobroker.vis-2, node: v20.17.0, js-controller: 6.0.11
2024-09-26 15:45:18.068  - error: vis-2.0 (1389) License is invalid! Nothing updated. Error: serial number (UUID) in license is for other device
2024-09-26 15:45:18.153  - info: tankerkoenig.0 (1374) Start first request
2024-09-26 15:45:21.336  - info: yr.0 (1267) Data updated.
2024-09-26 15:45:21.337  - info: yr.0 (1267) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-09-26 15:45:21.523  - info: vis.0 (1405) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.vis, node: v20.17.0, js-controller: 6.0.11
2024-09-26 15:45:21.906  - info: host.Raspi58GB instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-09-26 15:45:22.663  - info: vis.0 (1405) Terminated (NO_ERROR): Without reason
2024-09-26 15:45:23.198  - info: host.Raspi58GB instance system.adapter.vis.0 terminated while should be started once
2024-09-26 15:45:24.723  - info: host.Raspi58GB instance system.adapter.web.0 in version "6.2.5" started with pid 1421
2024-09-26 15:45:25.655  - info: web.0 (1421) starting. Version 6.2.5 in /opt/iobroker/node_modules/iobroker.web, node: v20.17.0, js-controller: 6.0.11
2024-09-26 15:45:25.777  - info: web.0 (1421) socket.io server listening on port 8082
2024-09-26 15:45:25.779  - info: web.0 (1421) http server listening on port 8082
2024-09-26 15:45:28.675  - info: host.Raspi58GB instance system.adapter.followthesun.0 in version "0.5.1" started with pid 1436
2024-09-26 15:45:29.606  - info: followthesun.0 (1436) starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.followthesun, node: v20.17.0, js-controller: 6.0.11
2024-09-26 15:45:29.615  - info: followthesun.0 (1436) Started with JSON-Explorer version 0.1.16
2024-09-26 15:45:29.615  - info: followthesun.0 (1436) Sun position calculation will be done every 60 seconds
2024-09-26 15:45:29.616  - info: followthesun.0 (1436) Daily sun parameter calculation scheduled for 00:00:39

die Einstellungen des Adapters:

Erkennst Du einen Fehler? Ich möchte doch wenigstens die Zigbee-Aktoren wieder nutzen.