UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Asgothian]

@flodirmann sagte in Zigbee iobroker Error while opening serialport:

@thomas-braun

So. Auch nach komplettem Neuaufsetzen des Systems mit Debian 12 Bookworm und dem Korrigieren eigenverschuldeter Rechtschreibfehler (diesmal aus PuTTY direkt rauskopiert) funktioniert es noch nicht besser.

Könnt ihr mir da irgendwie weiterhelfen? Falls weitere Informationen benötigt werden, gerne Bescheid geben.

Stell mal bitte die Firmware im zigbee-Adapter auf EZSP (oder ähnlich) um - der sonoff dongle V2 nutzt meines Wissens nach nicht den TI Chip Satz

A.

[flodirmann]

@asgothian
Danke danke danke!
Das hat tatsächlich endlich geholfen. :+1:

[stauber]

Hallo zusammen,

seit gestern läuft der Zigbee Adapter nicht mehr ich musste gestern Router und Rasp abstecken und seitdem wird er nur noch Orange.

Bei mir stand die ganze Zeit das Node js v22.x empfohlen wird seit dem letzten Update wird nun die 18.x empfohlen im Forum wiederum die 20.x welche soll ich jetzt Installieren?
Mit den Befehl iob Node js-update 18 bleibt er bei 22.x hab ich schon Probiert gibt es noch eine andere Möglichkeit?

Hardware
Raspberry4 und das CC26x02R1

Ansonsten könntet ihr mir irgendwie weiterhelfen?

[Thomas Braun]

@stauber

iob nodejs-update 20

Und dann mal die Ausgabe von

iob diag

Da kannst du den Link 'by-id' herausnehmen und in den Einstellungen des Adapters statt /dev/ttyACM0 eintragen.

[stauber]

@thomas-braun

Hallo Thomas

bleib weiterhin auf 22.4
nochmal zur Verständnis ich Kopiere den Text danach y

oder mach ich was Falsch?

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

oder mach ich was Falsch?

Ich weiß nicht was du machst...

Du sollst

iob nodejs-update 20

in dein Terminal hacken.

[stauber]

@thomas-braun sagte in Zigbee iobroker Error while opening serialport:

iob nodejs-update 20

Das mach ich auch
nur er Zeigt immer noch v22.4

ioBroker nodejs fixer 2024-05-23
You requested to install latest version from nodejs v20 tree.

Your current setup is:
/usr/bin/nodejs         v22.4.1
/usr/bin/node           v22.4.1
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.2

We found these nodejs versions available for installation:

nodejs:
  Installed: 22.4.1-1nodesource1
  Candidate: 22.4.1-1nodesource1
  Version table:
 *** 22.4.1-1nodesource1 100
        100 /var/lib/dpkg/status
     20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages



Nothing to do - Your installation is using the correct paths.

You are running nodejs v22.4.1. Do you want to install latest version from nodejs v.20 tree?

Press <y> to continue or any other key to quit
Trying to fix your installation now. Please be patient.
rm: cannot remove '/usr/share/keyrings/nodesource.gpg'$'\n''/etc/apt/keyrings/nodesource.gpg': No such file or directory
Waiting for ioBroker to shut down - Give me a minute...
############################################################

*** These repos are active on your system:
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done

*** Installing ca-certificates, curl and gnupg, just in case they are missing.

*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source

deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_20.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001

*** These repos are active after the adjustments:
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Get:4 https://deb.nodesource.com/node_20.x nodistro InRelease [12.1 kB]
Get:5 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages [8461 B]
Fetched 20.6 kB in 1s (20.3 kB/s)
Reading package lists... Done

Installing nodejs now!

Installing the nodejs!

We tried our best to fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

node -v

sagt?

[stauber]

@thomas-braun
auch 22

[Thomas Braun]

@stauber

Bitte keine Bildchen von Text.

sudo apt update
sudo apt install nodejs=20.15.1-1nodesource1

[stauber]

@thomas-braun

ok das hat funktioniert vielen Dank!

jetzt mit

iob diag 

Kannst du mir sagen wo ungefähr die by id steht?

[Thomas Braun]

@stauber

Poste die Langfassung in Gänze.

[stauber]

@thomas-braun

Skript v.2024-05-22

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 32 bit

Systemuptime and Load:
 19:48:08 up 23:11,  1 user,  load average: 0.64, 0.87, 0.91
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2024-07-14 19:48:08 CEST
           Universal time: Sun 2024-07-14 17:48:08 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.0G        1.5G        0.0K        1.2G        2.7G
Swap:            99M          0B         99M
Total:          3.9G        1.0G        1.6G

Active iob-Instances:   22

         3793 M total memory
         1018 M used memory
         1067 M active memory
          957 M inactive memory
         1540 M free memory
          251 M buffer memory
          981 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 19:48:09 up 23:11,  1 user,  load average: 0.67, 0.87, 0.91
Tasks: 174 total,   1 running, 173 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.9 us,  2.9 sy,  0.0 ni, 94.2 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3793.3 total,   1540.2 free,   1019.4 used,   1233.7 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   2697.6 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      220G  8.2G  203G   4% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  892K  758M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jul 13 20:36:26 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:5B:D6:24 vc_mem.mem_base                                                                     =0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=61bf9d36-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): write access will be enabled during recovery
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): recovery complete
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Jul 13 20:36:28 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Sat Jul 13 20:36:30 2024] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET                       SOURCE     FSTYPE     OPTIONS
/                            /dev/sda2  ext4       rw,noatime
|-/dev                       devtmpfs   devtmpfs   rw,relatime,size=1677960k,nr_inodes=419490,mode=755
| |-/dev/shm                 tmpfs      tmpfs      rw,nosuid,nodev
| |-/dev/pts                 devpts     devpts     rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| `-/dev/mqueue              mqueue     mqueue     rw,nosuid,nodev,noexec,relatime
|-/proc                      proc       proc       rw,relatime
| `-/proc/sys/fs/binfmt_misc systemd-1  autofs     rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct
|-/sys                       sysfs      sysfs      rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security     securityfs securityfs rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup           cgroup2    cgroup2    rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore           pstore     pstore     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf              bpf        bpf        rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug        debugfs    debugfs    rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing      tracefs    tracefs    rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections fusectl    fusectl    rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config       configfs   configfs   rw,nosuid,nodev,noexec,relatime
|-/run                       tmpfs      tmpfs      rw,nosuid,nodev,size=776876k,nr_inodes=819200,mode=755
| |-/run/lock                tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs          sunrpc     rpc_pipefs rw,relatime
| `-/run/user/1000           tmpfs      tmpfs      rw,nosuid,nodev,relatime,size=388436k,nr_inodes=97109,mode=700,uid=1000,gid=1000
`-/boot                      /dev/sda1  vfat       rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
2.6G    /var/
1.3G    /var/log/journal/3e23e34d17484a28b9473f69f7d9d21c
1.3G    /var/log/journal
1.3G    /var/log
1.2G    /var/cache/apt

Archived and active journals take up 1.2G in the file system.

/opt/iobroker/backups:
121M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
604M    /opt/iobroker/iobroker-data/
439M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/files/javascript.admin
136M    /opt/iobroker/iobroker-data/backup-objects
118M    /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
26M     /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.8947f24d.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if00

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0



*** NodeJS-Installation ***

/usr/bin/nodejs         v20.15.1
/usr/bin/node           v20.15.1
/usr/bin/npm            10.7.0
/usr/bin/npx            10.7.0
/usr/bin/corepack       0.28.1


nodejs:
  Installed: 20.15.1-1nodesource1
  Candidate: 20.15.1-1nodesource1
  Version table:
 *** 20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.17.14
javascript:     8.3.1

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : raspberrypi                              - disabled
+ system.adapter.awtrix-light.0           : awtrix-light          : raspberrypi                              -  enabled
+ system.adapter.awtrix-light.1           : awtrix-light          : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.birthdays.0              : birthdays             : raspberrypi                              -  enabled
  system.adapter.cloud.0                  : cloud                 : raspberrypi                              - disabled
  system.adapter.denon.0                  : denon                 : raspberrypi                              - disabled
  system.adapter.devices.0                : devices               : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              -  enabled
+ system.adapter.fullcalendar.0           : fullcalendar          : raspberrypi                              -  enabled
+ system.adapter.govee-local.0            : govee-local           : raspberrypi                              -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : raspberrypi                              - disabled
+ system.adapter.hmip.0                   : hmip                  : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
  system.adapter.iot.0                    : iot                   : raspberrypi                              - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.klf200.0                 : klf200                : raspberrypi                              -  enabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              - disabled, port: 54321
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.nuki-extended.0          : nuki-extended         : raspberrypi                              - disabled
  system.adapter.nuki.0                   : nuki                  : raspberrypi                              - disabled
  system.adapter.places.0                 : places                : raspberrypi                              - disabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.statistics.0             : statistics            : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
  system.adapter.web.0                    : web                   : raspberrypi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyACM0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.17.14  , installed 6.17.14
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awtrix-light" : 1.2.0    , installed 1.2.0
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "birthdays"    : 3.0.0    , installed 3.0.0
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "denon"        : 1.15.5   , installed 1.15.5
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
Adapter    "fullcalendar" : 2.3.17   , installed 2.3.17
Adapter    "govee-local"  : 0.2.6    , installed 0.2.6
Adapter    "heatingcontrol": 2.12.8  , installed 2.12.8
Adapter    "heos"         : 2.2.1    , installed 2.2.1
Adapter    "hmip"         : 1.23.3   , installed 1.23.3
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.3.1    , installed 8.3.1
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "klf200"       : 1.2.0    , installed 1.2.0
Adapter    "mihome-vacuum": 4.2.0    , installed 4.2.0
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "nuki"         : 2.0.0    , installed 2.0.0
Adapter    "nuki-extended": 2.7.0    , installed 2.7.0
Adapter    "places"       : 1.2.0    , installed 1.2.0
Adapter    "rest-api"     : 2.0.1    , installed 2.0.1
Adapter    "scenes"       : 3.0.4    , installed 3.0.4
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 3.3.2    , installed 3.3.2
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.1    , installed 2.6.1
Adapter    "yr"           : 5.3.0    , installed 5.3.0
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        9591
States:         7847

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      109        14805      522/mosquitto
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       703780     4069/io.shelly.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12860      524/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       702593     3884/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       702596     3884/iobroker.js-co
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       701671     3902/io.admin.0
tcp6       0      0 :::1883                 :::*                    LISTEN      109        14806      522/mosquitto
tcp6       0      0 :::22                   :::*                    LISTEN      0          12862      524/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        15505      394/avahi-daemon: r
udp        0      0 127.0.0.1:4002          0.0.0.0:*                           1001       705775     4736/io.govee-local
udp        0      0 0.0.0.0:34863           0.0.0.0:*                           108        15507      394/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14846      734/dhcpcd
udp6       0      0 :::5353                 :::*                                108        15506      394/avahi-daemon: r
udp6       0      0 :::50567                :::*                                108        15508      394/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          15746      734/dhcpcd

*** Log File - Last 25 Lines ***

2024-07-14 19:46:11.260  - info: zigbee.0 (4000) Got terminate signal TERMINATE_YOURSELF
2024-07-14 19:46:11.381  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2024-07-14 19:46:11.263  - info: zigbee.0 (4000) cleaned everything up...
2024-07-14 19:46:11.285  - info: zigbee.0 (4000) Zigbee: disabling joining new devices.
2024-07-14 19:46:11.529  - warn: zigbee.0 (4000) Failed to stop zigbee during startup
2024-07-14 19:46:11.530  - info: zigbee.0 (4000) terminating
2024-07-14 19:46:11.531  - info: zigbee.0 (4000) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-14 19:46:11.601  - info: zigbee.0 (4000) debug devices set to []
2024-07-14 19:46:11.765  - info: zigbee.0 (4000) terminating
2024-07-14 19:46:12.143  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-14 19:46:12.272  - info: host.raspberrypi "system.adapter.zigbee.0" enabled
2024-07-14 19:46:12.522  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 5046
2024-07-14 19:46:18.289  - info: zigbee.0 (5046) starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.15.1, js-controller: 5.0.19
2024-07-14 19:46:18.399  - info: zigbee.0 (5046) delete old Backup files. keep only last 10
2024-07-14 19:46:18.402  - info: zigbee.0 (5046) Starting Zigbee  npm ...
2024-07-14 19:46:18.831  - info: zigbee.0 (5046) Installed Version: iobroker.zigbee@1.10.3
2024-07-14 19:46:39.534  - error: zigbee.0 (5046) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2024-07-14 19:46:39.535  - error: zigbee.0 (5046) Failed to start Zigbee
2024-07-14 19:46:39.536  - error: zigbee.0 (5046) Error herdsman start
2024-07-14 19:46:49.540  - info: zigbee.0 (5046) Try to reconnect. 1 attempts left
2024-07-14 19:46:49.541  - info: zigbee.0 (5046) Starting Zigbee  npm ...
2024-07-14 19:46:49.555  - info: zigbee.0 (5046) Installed Version: iobroker.zigbee@1.10.3
2024-07-14 19:46:49.827  - error: zigbee.0 (5046) Starting zigbee-herdsman problem : "Error Resource temporarily unavailable Cannot lock port"
2024-07-14 19:46:49.828  - error: zigbee.0 (5046) Failed to start Zigbee
2024-07-14 19:46:49.829  - error: zigbee.0 (5046) Error herdsman start

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

Userland : 32 bit

Beizeiten mal komplett neuaufsetzen, dann in einer reinen 64Bit-Version.

Boot Target: graphical.target

sudo systemctl set-default multi-user.target

[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[Sat Jul 13 20:36:28 2024] EXT4-fs (sda2): write access will be enabled during recovery

Dein Dateisystem hat Einschläge.

by-id:

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if00

einer der beiden Einträge muss in den Einstellungen eingetragen werden. Musst du mal ausprobieren, ob if03 oder if00 passt.

Schmeiß die Quelle
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
raus.

[stauber]

@thomas-braun

Dein Dateisystem hat Einschläge.

by-id:

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100PJ1-if00

einer der beiden Einträge muss in den Einstellungen eingetragen werden. Musst du mal ausprobieren, ob if03 oder if00 passt.

Nein bleibt Orange bei beiden Einträgen
kann es sein das die Erweiterte Pan falsch ist? Hab ein Backupgeladen das vor 2 Tagen da ist alles noch gelaufen.

Schmeiß die Quelle
Hit:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease
raus.

Wie mach ich das?

Vielen Dank für deine Unterstützung und deine Mühen

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

Wie mach ich das?

Lösch die entsprechende Zeile in der Datei /etc/apt/sources.list raus.

[stauber]

@thomas-braun sagte in Zigbee iobroker Error while opening serialport:

/etc/apt/sources.list

pi@raspberrypi:~ $ /etc/apt/sources.list
-bash: /etc/apt/sources.list: Keine Berechtigung
pi@raspberrypi:~ $

er sagt ich habe keine Berechtigung

[Thomas Braun]

@stauber sagte in Zigbee iobroker Error while opening serialport:

er sagt ich habe keine Berechtigung

Du verwendest ja auch kein Kommando...

sudo nano /etc/apt/sources.list

Speichern mit Strg-O, nano verlassen mit Strg-X

[arteck]

@thomas-braun sagte in Zigbee iobroker Error while opening serialport:

-if00

ist es immer

[stauber]

Hallo zusammen,

tut mir leid das ich mich jetzt erst melde hatte viel zu tun in der Arbeit.
Heute hab ich einen Stick von Sonoff ausprobiert und siehe das es läuft wieder ich vermute das das Board einfach defekt ist.

Danke nochmal für eure Hilfe