Iobroker lässt sich nicht mehr starten.

Michael_Schotthoefer

Hi. Ich habe das Problem das mein Iobroker nicht mehr startet. Ich konnte schon feststellen das nodejs nicht richtig installiert war und konnte es fixen. Leider komme ich nun nicht mehr weiter.
Kann mir jemand noch helfen?

Anbei die Iobroker diag.

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : armhf

Systemuptime and Load:
 19:48:29 up 14 min,  1 user,  load average: 0.39, 0.50, 0.52
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Wed 2024-01-17 19:48:29 GMT
           Universal time: Wed 2024-01-17 19:48:29 UTC
                 RTC time: n/a
                Time zone: Europe/London (GMT, +0000)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        231M        6.8G        1.0M        796M        7.5G
Swap:            99M          0B         99M
Total:          7.9G        231M        6.9G

         7812 M total memory
          231 M used memory
          421 M active memory
          411 M inactive memory
         6784 M free memory
           96 M buffer memory
          699 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT                   LOAD   ACTIVE SUB    DESCRIPTION
* grafana-server.service loaded failed failed Grafana instance

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   16G   13G  56% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs     782M     0  782M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Jan 17 19:34:00 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:E1:AA:91 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=ad490bbd-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed Jan 17 19:34:01 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Jan 17 19:34:01 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Jan 17 19:34:04 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
7.7G    /var/
5.8G    /var/log
2.9G    /var/log/journal/2c760f47d5f741e395b4738f4f48cd7d
2.9G    /var/log/journal
1.4G    /var/lib

Archived and active journals take up 2.8G in the file system.

/opt/iobroker/backups:
257M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.7G    /opt/iobroker/iobroker-data/
926M    /opt/iobroker/iobroker-data/files
507M    /opt/iobroker/iobroker-data/history
136M    /opt/iobroker/iobroker-data/backup-objects
112M    /opt/iobroker/iobroker-data/files/vis-2-beta

The five largest files in iobroker-data are:
94M     /opt/iobroker/iobroker-data/states.jsonl
46M     /opt/iobroker/iobroker-data/objects.jsonl
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
24M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! extraneous: bufferutil@ /opt/iobroker/node_modules/bufferutil
npm ERR! extraneous: diskusage@ /opt/iobroker/node_modules/diskusage
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0
npm ERR! extraneous: unix-dgram@ /opt/iobroker/node_modules/unix-dgram

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-01-17T19_48_37_592Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Core adapters versions
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
js-controller:
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
admin:
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
javascript:

npm ERR! code ELSPROBLEMS
npm ERR! extraneous: bufferutil@ /opt/iobroker/node_modules/bufferutil
npm ERR! extraneous: diskusage@ /opt/iobroker/node_modules/diskusage
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0
npm ERR! extraneous: unix-dgram@ /opt/iobroker/node_modules/unix-dgram

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-01-17T19_48_40_428Z-debug-0.log
Adapters from github:   0

Adapter State
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Enabled adapters with bindings
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

ioBroker-Repositories
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Installed ioBroker-Instances
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Objects and States
Please stand by - This may take a while
Objects:        0
States:         0

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
E: The repository 'https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye Release' does not have a Release file.
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:5038            0.0.0.0:*               LISTEN      111        14743      703/asterisk
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14559      521/sshd: /usr/sbin
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        15797      709/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          14569      521/sshd: /usr/sbin
tcp6       0      0 :::8086                 :::*                    LISTEN      999        3998       709/influxd
udp        0      0 0.0.0.0:5060            0.0.0.0:*                           111        14755      703/asterisk
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14476      392/avahi-daemon: r
udp        0      0 0.0.0.0:43427           0.0.0.0:*                           111        15744      703/asterisk
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15481      702/dhcpcd
udp        0      0 0.0.0.0:41192           0.0.0.0:*                           108        14478      392/avahi-daemon: r
udp        0      0 0.0.0.0:4569            0.0.0.0:*                           111        14756      703/asterisk
udp6       0      0 :::5353                 :::*                                108        14477      392/avahi-daemon: r
udp6       0      0 :::52261                :::*                                108        14479      392/avahi-daemon: r
udp6       0      0 :::48892                :::*                                111        15745      703/asterisk
udp6       0      0 :::546                  :::*                                0          15493      702/dhcpcd

*** Log File - Last 25 Lines ***

2024-01-17 09:35:29.341  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.342  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.343  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.344  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.345  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.347  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.347  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.348  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.348  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.349  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.352  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.353  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.354  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.355  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.355  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.356  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.356  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.357  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.358  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.359  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.359  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.360  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.360  - warn: myvbus.0 (2404) get state error: DB closed
2024-01-17 09:35:29.423  - error: upnp.0 (2300) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-01-17 09:35:33.763  - error: history.0 (1038) Objects database error: connect ECONNREFUSED 127.0.0.1:9001

============ Mark until here for C&P =============

iob diag has finished.

Copy text starting here:

======================= SUMMARY =======================
                        v.2023-10-10


   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               armhf
Timezone:               Europe/London (GMT, +0000)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.19.0
                        /usr/bin/node           v18.19.0
                        /usr/bin/npm            10.2.3
                        /usr/bin/npx            10.2.3
                        /usr/bin/corepack       0.22.0

Recommended versions are nodejs  and npm
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G        233M        6.8G        1.0M        761M        7.5G
Swap:            99M          0B         99M
Total:          7.9G        233M        6.9G

node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
Active iob-Instances:   0
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
ioBroker Core:          js-controller
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
                        admin

node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
ioBroker Status:

Status admin and web instance:
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Objects:                0
States:                 0

Size of iob-Database:

46M     /opt/iobroker/iobroker-data/objects.jsonl
94M     /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

=== Mark text until here for copying ===

Danke schonmal für eure Hilfe.

Gruß
Michael

Glasfaser

@michael_schotthoefer

cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller

Thomas Braun

@michael_schotthoefer sagte in Iobroker lässt sich nicht mehr starten.:

Kernel : aarch64
Userland : armhf

Mix aus 32 und 64Bit. Installier das Betriebssystem NEU und sortenrein.
Dann im neuen System deine Backups einspielen, fertig.

Thomas Braun

@michael_schotthoefer sagte in Iobroker lässt sich nicht mehr starten.:

            Time zone: Europe/London (GMT, +0000)

Vermutlich auch falsch.

Michael_Schotthoefer

@glasfaser
das kam dabei raus.

danke schonmal.

Michael_Schotthoefer

@thomas-braun
hi thomas.
heißt sd-karte formatieren und alles neu aufspielen?

Thomas Braun

@michael_schotthoefer sagte in Iobroker lässt sich nicht mehr starten.:

heißt sd-karte formatieren und alles neu aufspielen?

Ich würde es auf eine konsistente und aktuelle Basis setzen.

https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht

Michael_Schotthoefer

@thomas-braun
dann werde ich das morgen mal angehen.
ich werde berichten.

danke schonmal.

Michael_Schotthoefer

@thomas-braun

gibt es eine möglichkeit iobroker ein backup zu ziehen über putty?
habe backitup laufen gehabt aber habe nicht gemerkt das es schon länger nicht mehr sichert. habe über filezilla jetzt mal das ganze iobroker gesichert auf dem nas.
reicht das?

Thomas Braun

@michael_schotthoefer sagte in Iobroker lässt sich nicht mehr starten.:

gibt es eine möglichkeit iobroker ein backup zu ziehen über putty?

iobroker backup

Datei liegt dann in /opt/iobroker/backups
Wobei ich mir halt auch anschauen würde, warum dein Backitup nicht funktioniert. Insgesamt scheint mir deine Kiste leicht zu hinken...

Michael_Schotthoefer

@thomas-braun
wenn ich es richtig sehe benötige ich 64bit oder?

Michael_Schotthoefer

@thomas-braun
das hatte ich schon probiert.
geht leider nicht da anscheinend alles zerschossen ist.

Thomas Braun

@michael_schotthoefer sagte in Iobroker lässt sich nicht mehr starten.:

geht leider nicht da anscheinend alles zerschossen ist.

Ja, wissen wir.

Glasfaser

@michael_schotthoefer

Kannst du etwas testen :

iob stop
iob fix  
iob nodejs-update
iob setup first
sudo reboot

Glasfaser

@michael_schotthoefer sagte in Iobroker lässt sich nicht mehr starten.:

readonly on device

Hast du den Netz-Stecker gezogen !?

Michael_Schotthoefer

@glasfaser sagte in Iobroker lässt sich nicht mehr starten.:

@michael_schotthoefer

Kannst du etwas testen :
iob stop
iob fix  
iob nodejs-update
iob setup first
sudo reboot

habe es getestet. das kam dabei raus.

 ioBroker nodejs updater 2023-10-13
No recommendation for a nodejs version found on your system. We recommend to install latest version from nodejs v18 tree.

Your current setup is:
/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0

We found these nodejs versions available for installation:

nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages



Nothing to do - Your installation is using the correct paths.

You are running nodejs v18.19.0. Do you want to install latest version from nodejs v.18 tree?

Press <y> to continue or any other key to quit
Trying to update your installation now. Please be patient.

Waiting for ioBroker to shut down - Give me a minute...
############################################################

*** These repos are active on your system:
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Get:3 https://packages.grafana.com/enterprise/deb stable InRelease [5984 B]
Err:3 https://packages.grafana.com/enterprise/deb stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
Ign:4 https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye InRelease
Err:5 https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye Release
  404  Not Found [IP: 2600:1f1c:2e5:6900:e12:7a5d:4cf3:3662 443]
Reading package lists... Done
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
E: The repository 'https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2

*** Installing ca-certificates, curl and gnupg, just in case they are missing.

*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source

deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001

*** These repos are active after the adjustments:
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Get:3 https://packages.grafana.com/enterprise/deb stable InRelease [5984 B]
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Err:3 https://packages.grafana.com/enterprise/deb stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
Ign:5 https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye InRelease
Err:6 https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye Release
  404  Not Found [IP: 2600:1f1c:2e5:6900:e12:7a5d:4cf3:3662 443]
Reading package lists... Done
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
E: The repository 'https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye Release' does not have a Release file.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2

Installing the recommended nodejs version now!

Exact recommended version unknown, installing a fallback!
dpkg: warning: downgrading nodejs from 18.19.0-1nodesource1 to 18.0.0-1nodesource1
(Reading database ... 67384 files and directories currently installed.)
Preparing to unpack .../nodejs_18.0.0-1nodesource1_armhf.deb ...
Detected old npm client, removing...
Unpacking nodejs (18.0.0-1nodesource1) over (18.19.0-1nodesource1) ...
Setting up nodejs (18.0.0-1nodesource1) ...
Processing triggers for man-db (2.9.4-2) ...

Updating fallback to latest nodejs v18 release
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
E: The repository 'https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye Release' does not have a Release file.
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
(Reading database ... 67647 files and directories currently installed.)
Preparing to unpack .../nodejs_18.19.0-1nodesource1_armhf.deb ...
Detected old npm client, removing...
Unpacking nodejs (18.19.0-1nodesource1) over (18.0.0-1nodesource1) ...
Setting up nodejs (18.19.0-1nodesource1) ...
Processing triggers for man-db (2.9.4-2) ...
v18.19.0 has been installed! You are using the latest version now!
Installing the recommended nodejs version!
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
E: The repository 'https://packagecloud.io/ookla/speedtest-cli/raspbian bullseye Release' does not have a Release file.
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2

We tried our best to update or fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.

pi@raspberrypi:~ $ iob setup first
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

danke für die vielen hilfen von euch.

Glasfaser

@michael_schotthoefer

der letzte Befehl war

sudo reboot

und jetzt

cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller@5.0.17

Michael_Schotthoefer

@glasfaser sagte in Iobroker lässt sich nicht mehr starten.:

@michael_schotthoefer

der letzte Befehl war
sudo reboot
und jetzt
cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller@5.0.17

hat leider nicht funktioniert.

crunchip

@michael_schotthoefer sagte in Iobroker lässt sich nicht mehr starten.:

hat leider nicht funktioniert

Warum? MELDUNGEN?

Borkenkäfer

@crunchip
hallo
hänge mich hier mal rein da ich gleichen Fehlermeldungen habe
nach reboot und dem install iobroker.js-controller@5.0.17 komt
npm ERR! invalid Version
< cd /opt/iobroker
ulli@raspberrypi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller@5.0.17
npm ERR! Invalid Version:

npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-01-22T17_03_13_632Z-debug-0.log>

Community Forum

NEWS

Iobroker lässt sich nicht mehr starten.

Support us

839

32.5k

81.8k

1.3m