Probleme mit Zigbee Adapter 1.9.5

Jens G.

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: smarthomepi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 16:26:27 up  4:34,  1 user,  load average: 1.92, 0.88, 0.47
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Fri 2024-01-05 16:26:27 CET
           Universal time: Fri 2024-01-05 15:26:27 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop: 
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        794M        2.1G        0.0K        985M        2.9G
Swap:            99M          0B         99M
Total:          3.9G        794M        2.2G

         3838 M total memory
          794 M used memory
          495 M active memory
         1151 M inactive memory
         2058 M free memory
          238 M buffer memory
          746 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  8.6G   20G  31% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     768M  712K  768M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jan  5 11:51:47 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:2B:81:55 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=fb4b5961-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Fri Jan  5 11:51:48 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Jan  5 11:51:48 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Jan  5 11:51:51 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
3.3G    /var/
1.6G    /var/cache/apt
1.6G    /var/cache
1.5G    /var/cache/apt/archives
1.4G    /var/log/journal/47f40db81a924d0ea15f089479b9a154

Archived and active journals take up 1.3G in the file system.

/opt/iobroker/backups:
56M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
304M    /opt/iobroker/iobroker-data/
199M    /opt/iobroker/iobroker-data/files
71M     /opt/iobroker/iobroker-data/backup-objects
67M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
17M     /opt/iobroker/iobroker-data/objects.jsonl
14M     /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/userwidgets/abfallkalender_2023 (1)-cropped (1).html
8.9M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.16
admin:          6.12.0
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthomepi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : smarthomepi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : smarthomepi                              -  enabled
+ system.adapter.discovery.0              : discovery             : smarthomepi                              -  enabled
  system.adapter.dwd.0                    : dwd                   : smarthomepi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : smarthomepi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : smarthomepi                              -  enabled
+ system.adapter.iqontrol.0               : iqontrol              : smarthomepi                              -  enabled
+ system.adapter.javascript.0             : javascript            : smarthomepi                              -  enabled
+ system.adapter.maxcul.0                 : maxcul                : smarthomepi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : smarthomepi                              -  enabled, port: 1886, bind: 0.0.0.0
  system.adapter.scenes.0                 : scenes                : smarthomepi                              - disabled
+ system.adapter.sonoff.0                 : sonoff                : smarthomepi                              -  enabled, port: 1883, bind: 192.168.188.159
+ system.adapter.tankerkoenig.0           : tankerkoenig          : smarthomepi                              -  enabled
  system.adapter.terminal.0               : terminal              : smarthomepi                              - disabled, port: 8099, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : smarthomepi                              -  enabled, port: 8085, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthomepi                              -  enabled, port: /dev/ttyUSB1

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthomepi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : smarthomepi                              -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : smarthomepi                              -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : smarthomepi                              -  enabled, port: 1883, bind: 192.168.188.159
+ system.adapter.web.0                    : web                   : smarthomepi                              -  enabled, port: 8085, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthomepi                              -  enabled, port: /dev/ttyUSB1

ioBroker-Repositories
stable        : http://repo.iobroker.live/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "daswetter"    : 3.1.11   , installed 3.1.11
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iqontrol"     : 2.3.0    , installed 2.3.0
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.16 [Updatable]
Adapter    "maxcul"       : 1.3.1    , installed 1.3.1
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "zigbee"       : 1.9.5    , installed 1.9.5

Objects and States
Please stand by - This may take a while
Objects:        4729
States:         1691

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          10819      773/sshd: /usr/sbin 
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        10711      451/influxd         
tcp        0      0 192.168.188.159:1883    0.0.0.0:*               LISTEN      1001       47485      8303/io.sonoff.0    
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       50214      8330/io.mqtt.0      
tcp        0      0 0.0.0.0:1887            0.0.0.0:*               LISTEN      1001       50215      8330/io.mqtt.0      
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       46977      8225/iobroker.js-co 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       46970      8225/iobroker.js-co 
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       46039      8246/io.admin.0     
tcp6       0      0 :::8085                 :::*                    LISTEN      1001       50942      9090/io.web.0       
tcp6       0      0 :::22                   :::*                    LISTEN      0          10821      773/sshd: /usr/sbin 
tcp6       0      0 :::8086                 :::*                    LISTEN      999        11968      451/influxd         
udp        0      0 0.0.0.0:42406           0.0.0.0:*                           108        11826      402/avahi-daemon: r 
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13695      765/dhcpcd          
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11824      402/avahi-daemon: r 
udp6       0      0 :::546                  :::*                                0          10763      765/dhcpcd          
udp6       0      0 :::5353                 :::*                                108        11825      402/avahi-daemon: r 
udp6       0      0 :::53005                :::*                                108        11827      402/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2024-01-05 16:26:25.626  - info: host.smarthomepi instance system.adapter.maxcul.0 started with pid 8665
2024-01-05 16:26:28.481  - info: dwd.0 (8427) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-05 16:26:28.821  - info: maxcul.0 (8665) starting. Version 1.3.1 in /opt/iobroker/node_modules/iobroker.maxcul, node: v18.19.0, js-controller: 5.0.16
2024-01-05 16:26:29.179  - info: host.smarthomepi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-01-05 16:26:29.351  - info: maxcul.0 (8665) using serial device /dev/ttyUSB0@38400
2024-01-05 16:26:29.392  - info: maxcul.0 (8665) serialPort /dev/ttyUSB0 is open!
2024-01-05 16:26:29.709  - info: host.smarthomepi instance system.adapter.tankerkoenig.0 started with pid 9004
2024-01-05 16:26:31.417  - info: maxcul.0 (8665) CUL FW Version: V 1.67 nanoCUL868
2024-01-05 16:26:32.632  - info: tankerkoenig.0 (9004) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.19.0, js-controller: 5.0.16
2024-01-05 16:26:32.695  - info: tankerkoenig.0 (9004) Adapter is already in daemon mode
2024-01-05 16:26:32.697  - warn: tankerkoenig.0 (9004) Sync time was too short (5). New sync time is 10 min
2024-01-05 16:26:32.698  - info: tankerkoenig.0 (9004) Sync time set to 10 minutes or 600000 ms
2024-01-05 16:26:33.708  - info: host.smarthomepi instance system.adapter.web.0 started with pid 9090
2024-01-05 16:26:34.180  - warn: zigbee.0 (8318) DeviceAvailability:Failed to ping 0xa4c1384e05b39d11 TS011F
2024-01-05 16:26:38.379  - info: web.0 (9090) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v18.19.0, js-controller: 5.0.16
2024-01-05 16:26:38.832  - info: web.0 (9090) socket.io server listening on port 8085
2024-01-05 16:26:38.846  - info: web.0 (9090) http server listening on port 8085
2024-01-05 16:26:39.942  - info: tankerkoenig.0 (9004) Start first request
2024-01-05 16:26:44.375  - info: web.0 (9090) ==> Connected system.user.admin from ::ffff:192.168.188.162
2024-01-05 16:27:38.077  - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21 
2024-01-05 16:27:38.085  - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21 admin
2024-01-05 16:27:38.713  - info: admin.0 (8246) ==> Connected system.user.admin from ::ffff:192.168.188.21
2024-01-05 16:27:41.881  - info: admin.0 (8246) ==> Connected system.user.admin from ::ffff:192.168.188.21
2024-01-05 16:27:42.203  - info: zigbee.0 (8318) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"SHK","serialNumber":"868","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB1","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}]
2024-01-05 16:27:46.416  - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21

So hier einmal die Langfassung nach nodejs Update.

pi@smarthomepi:~ $ apt policy udev
udev:
  Installiert:           247.3-7+rpi1+deb11u2
  Installationskandidat: 247.3-7+rpi1+deb11u2
  Versionstabelle:
 *** 247.3-7+rpi1+deb11u2 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
        100 /var/lib/dpkg/status

Thomas Braun

@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:

Installiert: 247.3-7+rpi1+deb11u2

Das ist das defekte Paket.
Für dein 32Bit-OS gibt es da aber soweit ich weiß auch keinen Patch mehr.

Ich würde den Weg einer Neuinstallation von Bookworm 64Bit Lite gehen.

Meister Mopper

@thomas-braun sagte in Probleme mit Zigbee Adapter 1.9.5:

Ich würde den Weg einer Neuinstallation von Bookworm 64Bit Lite gehen.

@jens-g
Ja, diesen Weg bin ich kürzlich auch erfolgreich gegangen.

Jens G.

@thomas-braun
Ok bedeutet konkret Micro SD Karte raus und neu beschreiben mit Bookworm Lite oder gibts noch eine Möglichkeit über ssh auf Bookworm 64 bit zu upgraden. Backup ist vorhanden, sowohl von Zigbee als auch Iobroker allgemein

Thomas Braun

@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:

gibts noch eine Möglichkeit über ssh auf Bookworm 64 bit zu upgraden.

Nein. Neuinstallation.

Jens G.

@thomas-braun
In Ordnung, ist ja zum Glück morgen WE dann werde ich es mal probieren, danach sollte der Stick besser laufen, so ein Mist, das ich die defekte Version erwischt habe :angry: . Also einfach per Skript Iobroker installieren, dann BackitUP Adapter drauf und wiederherstellen. Danach Zigbee und schauen ob es klappt, dann gibts morgen den Zwischenstand.
Danke für eure Tipps, muss ich wohl doch mal auf Bookworm gehen.
PS: Muss ich dann Zigbee neu anlernen oder reicht Backup drauf bzw. wiederherstellen?

Jens G.

@meister-mopper

Danke für deine Antwort irgendwelche Tipps noch oder einfach wie gehabt per Skript

Meister Mopper

@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:

oder einfach wie gehabt per Skript

Ganz rudimentär ohne Schnickschnack. Selbst der Vis-Bug ist mittlerweile behoben.

Jens G.

@meister-mopper

Das sind ja gute Aussichten für den Samstag. Dann hoffe ich mal das es bei mir ebenso glatt läuft

Jens G.

So nun ist es geschafft und die Ausgabe von /dev/serial/by-id lautet:

lrwxrwxrwx 1 root root 13 Jan  6 11:20 usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0 -> ../../ttyUSB0
lrwxrwxrwx 1 root root 13 Jan  6 11:20 usb-SHK_NANO_CUL_868-if00-port0 -> ../../ttyUSB1

habe den Zigbee teil schon direkt so eingetragen: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0

Aber trotzdem noch kein Signal überall nur getrennt zigbee adapter nach upgrade.png siehe Bild

Thomas Braun

@jens-g

Log sagt?

Jens G.

@thomas-braun
Im Log vom Iobroker steht immer Failed to ping für die Steckdose, obwohl diese eingeschaltet ist, das weiß ich denn dort hängt mein Homeserver dran. Bei den anderen Geräten liegts wahrscheinlich am Batterie Betrieb und nicht so oft senden

Thomas Braun

@jens-g

Wie wäre es, wenn du keine Nacherzählung machen würdest sondern einfach das Log postest? Oder auch

iob diag

Jens G.

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: smarthomepi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi7-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 12:24:44 up  1:03,  2 users,  load average: 0.32, 0.25, 0.29
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sat 2024-01-06 12:24:44 CET
           Universal time: Sat 2024-01-06 11:24:44 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop: 
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.2G        372M        1.2M        2.4G        2.7G
Swap:           104M          0B        104M
Total:          4.1G        1.2G        477M

         3793 M total memory
         1189 M used memory
         1172 M active memory
         2005 M inactive memory
          354 M free memory
           92 M buffer memory
         2241 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4       29G  3.5G   24G  13% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   61M  450M  12% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jan  6 11:20:50 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:2B:81:55 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=3381e9f9-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Jan  6 11:20:52 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Jan  6 11:20:54 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
503M    /var/
202M    /var/cache
197M    /var/cache/apt
160M    /var/lib
132M    /var/lib/apt/lists

Archived and active journals take up 40.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
217M    /opt/iobroker/iobroker-data/
198M    /opt/iobroker/iobroker-data/files
67M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/javascript.admin/static
47M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
17M     /opt/iobroker/iobroker-data/objects.jsonl
14M     /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/userwidgets/abfallkalender_2023 (1)-cropped (1).html
8.9M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SHK_NANO_CUL_868-if00-port0
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.12.0
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthomepi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : smarthomepi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : smarthomepi                              -  enabled
+ system.adapter.discovery.0              : discovery             : smarthomepi                              -  enabled
+ system.adapter.dwd.0                    : dwd                   : smarthomepi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : smarthomepi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : smarthomepi                              -  enabled
+ system.adapter.iqontrol.0               : iqontrol              : smarthomepi                              -  enabled
+ system.adapter.javascript.0             : javascript            : smarthomepi                              -  enabled
+ system.adapter.maxcul.0                 : maxcul                : smarthomepi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : smarthomepi                              -  enabled, port: 1886, bind: 0.0.0.0
  system.adapter.scenes.0                 : scenes                : smarthomepi                              - disabled
+ system.adapter.sonoff.0                 : sonoff                : smarthomepi                              -  enabled, port: 1883, bind: 192.168.188.159
+ system.adapter.tankerkoenig.0           : tankerkoenig          : smarthomepi                              -  enabled
  system.adapter.terminal.0               : terminal              : smarthomepi                              - disabled, port: 8099, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : smarthomepi                              -  enabled, port: 8085, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthomepi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthomepi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : smarthomepi                              -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : smarthomepi                              -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : smarthomepi                              -  enabled, port: 1883, bind: 192.168.188.159
+ system.adapter.web.0                    : web                   : smarthomepi                              -  enabled, port: 8085, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthomepi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0

ioBroker-Repositories
stable        : http://repo.iobroker.live/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "daswetter"    : 3.1.11   , installed 3.1.11
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iqontrol"     : 2.3.0    , installed 2.3.0
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "maxcul"       : 1.3.1    , installed 1.3.1
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "zigbee"       : 1.9.5    , installed 1.9.5

Objects and States
Please stand by - This may take a while
Objects:        4797
States:         1744

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13059      773/sshd: /usr/sbin 
tcp        0      0 192.168.188.159:1883    0.0.0.0:*               LISTEN      1001       51787      10516/io.sonoff.0   
tcp        0      0 0.0.0.0:1887            0.0.0.0:*               LISTEN      1001       51828      10547/io.mqtt.0     
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       51827      10547/io.mqtt.0     
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       51508      10210/iobroker.js-c 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       51515      10210/iobroker.js-c 
tcp6       0      0 :::22                   :::*                    LISTEN      0          13061      773/sshd: /usr/sbin 
tcp6       0      0 :::8085                 :::*                    LISTEN      1001       54602      11727/io.web.0      
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       49898      10239/io.admin.0    
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        15395      511/avahi-daemon: r 
udp        0      0 0.0.0.0:51346           0.0.0.0:*                           104        15397      511/avahi-daemon: r 
udp6       0      0 fe80::8152:7386:387:546 :::*                                0          13144      652/NetworkManager  
udp6       0      0 :::44029                :::*                                104        15398      511/avahi-daemon: r 
udp6       0      0 :::5353                 :::*                                104        15396      511/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2024-01-06 12:20:26.629  - info: host.smarthomepi "system.adapter.zigbee.0" enabled
2024-01-06 12:20:26.865  - info: host.smarthomepi instance system.adapter.zigbee.0 started with pid 11984
2024-01-06 12:20:31.349  - info: zigbee.0 (11984) starting. Version 1.9.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17
2024-01-06 12:20:31.453  - info: zigbee.0 (11984) delete old Backup files. keep only last 10
2024-01-06 12:20:31.456  - info: zigbee.0 (11984) Starting Zigbee  npm ...
2024-01-06 12:20:31.790  - info: zigbee.0 (11984) Installed Version: iobroker.zigbee@1.9.5
2024-01-06 12:20:32.727  - info: zigbee.0 (11984) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20210708}}
2024-01-06 12:20:32.737  - info: zigbee.0 (11984) Unable to disable LED, unsupported function.
2024-01-06 12:20:32.762  - info: zigbee.0 (11984)   --> transmitPower : high+
2024-01-06 12:20:32.783  - info: zigbee.0 (11984) Currently 5 devices are joined:
2024-01-06 12:20:32.837  - info: zigbee.0 (11984) 0x00158d0002f7bc51 (addr 30345): WXKG01LM - Xiaomi MiJia wireless switch (EndDevice)
2024-01-06 12:20:32.842  - info: zigbee.0 (11984) 0x00158d0002732ad3 (addr 49658): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice)
2024-01-06 12:20:32.843  - info: zigbee.0 (11984) 0x00158d00051e85e8 (addr 46898): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2024-01-06 12:20:32.846  - info: zigbee.0 (11984) 0x7cb03eaa0a00c5df (addr 39975): AC03642 - OSRAM SMART+ CLASSIC A 60 TW (Router)
2024-01-06 12:20:32.848  - info: zigbee.0 (11984) 0xa4c1384e05b39d11 (addr 45128): TS011F_plug_1 - TuYa Smart plug (with power monitoring) (Router)
2024-01-06 12:20:32.849  - info: zigbee.0 (11984) Zigbee started
2024-01-06 12:20:32.910  - info: zigbee.0 (11984) debug devices set to []
2024-01-06 12:20:55.844  - warn: zigbee.0 (11984) DeviceAvailability:Failed to ping 0x7cb03eaa0a00c5df CLA60 TW OSRAM
2024-01-06 12:21:04.726  - info: admin.0 (10239) ==> Connected system.user.admin from ::ffff:192.168.188.21
2024-01-06 12:21:05.097  - info: zigbee.0 (11984) List of port: [{"path":"/dev/ttyUSB1","manufacturer":"SHK","serialNumber":"868","pnpId":"usb-SHK_NANO_CUL_868-if00-port0","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0","vendorId":"10c4","productId":"ea60"}]
2024-01-06 12:21:06.742  - warn: zigbee.0 (11984) DeviceAvailability:Failed to ping 0xa4c1384e05b39d11 TS011F
2024-01-06 12:25:00.041  - info: host.smarthomepi instance system.adapter.dwd.0 started with pid 12220
2024-01-06 12:25:02.430  - info: dwd.0 (12220) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.19.0, js-controller: 5.0.17
2024-01-06 12:25:13.275  - info: dwd.0 (12220) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-06 12:25:13.807  - info: host.smarthomepi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

So hier ist die Langfassung

Inklusive Zigbee Log vom Iobroker als Bild zigbee log iobroker.png

Thomas Braun

@jens-g

System ist richtig aufgesetzt.
Die OSRAM-Klamotten sind bekannt dafür zickig zu sein.
Bring vielleicht die Firmware des Sticks auf Stand, die ist wohl schon älter.

Jens G.

@thomas-braun
Osram teste ich mal kurz. Lampe lässt sich schalten Temp und Helligkeit einstellen obwohl im Adapter steht nicht verbunden
Wie update ich den Stick denn ?

Thomas Braun

@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:

Wie update ich den Stick denn ?

Musste mal schauen. Ich hab den selber nicht und mich daher noch nie darum gesorgt.

Jens G.

@thomas-braun

Verstehe, hab dazu schon mal etwas auf youtube gesehen über ssh möglich mal schauen. Werde das hier mal testen: https://www.youtube.com/watch?v=0en12lyJPAs

Jetzt ist die Steckdose doch wieder verbunden, warum auch immer hat jetzt Linkquality 87.
Stick brauch wohl länger alle geräte kommen wieder zurück, einfach mal abwarten

Thomas Braun

@jens-g

Ich mach es bei meinem immer so:

https://forum.iobroker.net/topic/50180/anleitung-zigbee-firmware-auf-der-kommandozeile-flashen

Thomas Braun

@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:

Stick brauch wohl länger alle geräte kommen wieder zurück, einfach mal abwarten

Das ist aber auch das typische Verhalten eines Zigbee-Netzes.

Community Forum

NEWS

Probleme mit Zigbee Adapter 1.9.5

Support us

861

32.4k

81.5k

1.3m